Specification Guide

THE AW16-B BATTERY-POWERED WHEEL BUGGY

The Allen AW16-B battery-powered buggy has been uniquely designed and tested for jobsites and projects where emissions are a major concern. The Allen AW16-B Power Buggy is powered by a rugged Vanguard 48 Volt Lithium- Ion power pack capable of reaching 8-9 hour run times. There are many features that make the AW16-B the most durable and versatile battery-powered buggy on the market. ForConstructionPros.com/21952846

Name of Equipment: Type of Equipment

AW16-B Battery-powered Wheel Buggy

Dimensions (L x W x H) Weight Weight Capacity Speed (if applicable)

97 by 47 by 50 in. 1,507 lbs. 2,500 lbs. 6 mph

Multiple Attachment Options

No

Engine

48 Volt Lithium-Ion Battery

WERK-BRAU SKELETON ROCK BUCKET

Werk-Brau Skeleton Buckets are specifically designed to separate large rock and other debris from smaller loose materials. Available in various widths and sizes for either loaders or excavators. Manufactured with high-strength T-1 steel in all critical wear points, with abrasion resistant wear straps to reinforce the bucket bottom. Tapered side plates reduce wear on the bucket and allow for easier dumping. Werk-Brau Skeleton Rock Buckets are ideal for quarry work and anywhere that larger materials are sorted from smaller, loose materials. ForConstructionPros.com/21809368

Name of Equipment Type of Equipment / Use Dimensions Weight: Weight Capacity Speed Multiple Attachment Options

Skeleton Buckets Rock Sifting Various widths available 2.75 to 7 cu. yd. n/a n/a

Engine

Powered by Wheel Loaders with a 2.5 yd. capacity and greater

KUBOTA CC30 CONCRETE CLAW

The Kubota CC30 Concrete Claw is used for digging and removing large sections of concrete floors, driveways, sidewalks, and other large slabs. Simply slide the teeth under a concrete slab, lift and load the slab under the pin-under top for clean and efficient concrete removal. The CC30 Concrete Claw is manufactured by Land Pride, a Division of Great Plains Mfg. Inc. a Kubota company and features a universal quick-attach hitch that fits a wide variety of loaders and makes the attachment easy to attach. Its high strength T1 steel side panels resist bending forces while prying up concrete slabs and the side panels are reinforced to add strength and rigidity to the attachment. The Concrete Claw is performance matched with Kubota’s SSV and SVL Series. ForConstructionPros.com/21113973

Name of Equipment: Type of Equipment / Use Dimensions (L x W x H) Weight Weight Capacity Speed (if applicable)

Kubota CC30 Concrete Claw Attachment Digging and removing large sections of concrete slabs

63 1/4 in. by 45 3/4 in. by 21 in. 590 lbs. n/a n/a

Multiple Attachment Options

n/a

Engine

100 hp maximum

FECON RK6015 STANDARD-FLOW MULCHER HEAD

Fecon introduces the RK6015, a new, wider, standard flow mulcher head which is ideal for use with most standard skid steer loaders, Avant-type wheel loaders, and other carriers that are able to provide 17-27 gpm of hydraulic flow, have enclosed cabs that can be properly protected with the appropriate polycarbonate guarding, and have the ability to carry the 1,465-pound attachment. This new brush cutting tool allows those with standard flow skid steers up to 75 HP to expand their capabilities and enter the brush cutting arena without a large capital expenditure. A bitelimiting split ring rotor holds 26 knife or carbide-type cutting tools and has a 60-in. working width. ForConstructionPros.com/21771856

Name of Equipment Type of Equipment / Use Dimensions Weight: Weight Capacity Speed Multiple Attachment Options

RK6015 Standard Flow Mulcher Head Brush Cutting 60 in. Working Width 1,465 lbs. n/a 2,400 rpm n/a

Engine (Type, Fuel, horsepower, 4WD or 2WD):

Powered by skid steer, 17-27 gpm hydraulic fl ow