4 minute read
New Products
6NEW PRODUCTS FOR THE CONCRETE CONTRACTOR
WerkMaster's RAIDER XL5 Mid-Sized Floor Grinder
WerkMaster's RAIDER XL5 is designed to maximize results and minimize the time you spend behind a machine. Contractors can find up to 40% in labor savings on every job. The RAIDER XL5 is a compact and powerful edger, grinder and polisher that is capable of getting to 1/8-in. of the wall.
WerkMaster's six counter-rotating heads make the XL5 an aggressive and powerful surface prep and polishing machine that is budget friendly. It is compact and easy enough to transport, but powerful enough for the commercial contractor.
ForConstructionPros.com/21648106
Trinic's White UHPC Powdered Additive
Trinic white UHPC additive offers an economical alternative to producing ultra-high-performance concrete. Customers add local sand, cement & fiber to save on shipping costs and delays. UHPC made with our additive exceeds the performance of conventional high-performance concretes with very high compressive and flexural strengths, very low permeability, and excellent freeze-thaw durability.
ForConstructionPros.com/21723171
Minnich's Control Speed Concrete Vibrator
The Control Speed Vibrator (CSV) from Minnich Manufacturing is a lightweight, durable, electric flex shaft concrete vibrator controlled through connectivity. Using Bluetooth and the Minnich app on an iOS or Android device, operators can choose between set speeds of 6,000, 8,000, 10,500, and open VPM. Choosing slower vibration speeds lessens material separation and reduces surface blemishes and repairs. Once a speed is chosen, the CSV will maintain that speed as the concrete load changes. The 15-amp (115-volt) universal motor drives a full line of Minnich shafts and heads and comes standard with a quick disconnect that adapts to the vibrators of many manufacturers. The CSV has been designed with a soft start that saves energy and mechanical wear on the motor and power system.
ForConstructionPros.com/21710799
As part of their LumiCon Smart Construction Platform product suite, the LumiNode Plus concrete sensing solution by AOMS Technologies is an advanced wireless sensing solution that offers direct cloud connectivity, enabling instant streaming of concrete temperature and maturity data directly to the cloud without the need for extra devices such as network gateways, repeaters, or signal boosters. These advancements significantly reduce the capital cost of concrete monitoring and enhance reliability for cloud connectivity.
Easy to install without any changes in the site workflow, LumiNode Plus pairs with embedded high-accuracy multi-point sensing cables, with customization enabling horizontal and vertical temperature monitoring regardless of the depth or complexity of concrete pours.
ForConstructionPros.com/21627359
SupraShine Maintenance Pads by Superabrasive
SupraShine, the new generation of maintenance pads by Superabrasive, were designed to restore and upgrade any floor, delivering outstanding results and savings. Four types of pads for all your floor care needs, from deep cleaning and restoration to daily maintenance: • SupraShine Regular — A range of
pads featuring a flexible material to deep clean, upgrade, and maintain all types of coated and uncoated, hard and resilient floors. Available in grits 400, 800, 1,800, 3,500, and 8,000. • High-Performance — Pads featuring a flexible material for daily maintenance of high traffic floors. Available in grits 800, 1,800, and 3,500. • Heavy Duty — Featuring a tough material meant for surface preparation and to remove extreme dirt - a real problem solver in difficult cases where more cleaning power is needed.
Available in grits 220 and 400. • Hybrids — A complete range of tools from 50 grit to 400 grit designed to restore surfaces - eliminate stains, scratches and orange peel, and achieve a smooth surface.
ForConstructionPros.com/21392119
ToughBuilt's Five-Blade Utility Knife
TOUGHBUILT's five-blade utility knife multitool can switch between scraper mode to remove paint, putty, adhesive on the surface, remove labels from windows, mirrors, tiles, and more; or in a utility knife mode features a rugged handle made from metal. The blade is 2.2-in. long with a 6-in. handle. The handles and blade are made from tripleinjected plastic and steel, respectively. • Patented switch mechanism quickly flips between utility knife and scraper with the flick of a thumb • Rubber comfort grips • Paint can opener • Carry loop • Smooth blade
ForConstructionPros.com/21648244
