Trucks & Transportation

Stellar TMAX 16K Aluminum Service Body

The TMAX 16K aluminum service body is designed for use with 4,000-lb. cranes and smaller.

•Aluminum extrusion top allows for crane mounting without a tube crane reinforcement kit •Two built-in, drill-free accessory mounting rails •Wire harness channels inside compartments enable easy installation and keep wires out of the way •Includes stainless-steel billet-style hinges, three-point stainless steel compression latches and double spring over center door closures www.forconstructionpros.com/21808892

Fontaine Xcalibur Extendable Trailers

The 53-ft. Xcalibur extendable trailers are now legal on California roads.

•Four models measure 53 ft. in the closed position and 90 ft. fully opened •Less than 40 ft. between kingpin and rear axle center when closed and with sliding axles in the most forward position •Choice of spring or air suspension with tandem or tridem axles •Sliding axles attached to trailer in a “Slider Box” and move together as a unit •Include steel I-beam crossmembers on 12-in. centers, steel-reinforced main beams, structural steel side rails and steel front and rear skirts www.forconstructionpros.com/21772144

Hino Trucks Hino Edge Connected Vehicle Solution

Hino Edge synergizes the connection between the fleet customer, dealer network, telematics service providers and the Hino Ultimate Support Center.

•Included on qualifying 22MY and newer Hino conventional trucks as standard equipment •Includes five years of complimentary access to the fleet management web portal and mobile hub app •Delivers vehicle location tracking, a live fleet performance dashboard, vehicle health monitoring and simplified service experience •Provides flexibility to add on a thirdparty advanced telematics service from preferred partners www.forconstructionpros.com/21808872

Winter Equipment Pegasus Expandable Plow System

The Pegasus expandable plow cutting edge system features a heavy-duty Razor cutting edge and WinterFlex rubber wings, which create a squeegee effect with four wear surfaces per cutting edge.

•Abrasion-resistant 1/2-in. cover plates welded to two-piece 5/8-in. Boron •High-strength Grade 8 hardware and nylon lock nuts •Built-in wear indicators •Replaceable wing edges •Compatible with Western, Blizzard Power and SnowEx plow models www.forconstructionpros.com/21796512

Buyers Products Edgeless LED Work Lights

This selection of LED work lights includes “edgeless” models that sport a sleek, modern look.

•Available as stud-mounted floodlights and as combination spot-floodlight bars in a variety of sizes •Features include brighter lumen outputs, streamlined housing or ability to provide multiple functions in a single fixture •Other options range from DOT-sized lights that serve as stop/turn/tail, backup and strobe lights simultaneously to floodlights that include strobe functionality www.forconstructionpros.com/21808881

Strattec BOLT Lock Receiver Lock

The Receiver Lock is a dual-purpose lock for towing that is designed to lock the ball mount receiver onto the vehicle’s hitch.

•1/2-in. size fits Class 1 and 2 hitches while the 5/8-in. size fits Class 3, 4 and 5 hitches •Can be used whether or not a trailer is hitched to the vehicle •Prevents the ball mount from being stolen from the vehicle as well as prevents the trailer from being stolen with the ball mount receiver www.forconstructionpros.com/21808880

STEMCO Wheel-end Product Line

Available wheel-end products range from wheel seals to hub caps to hubodometers.

•Trifecta pre-adjusted hub assembly includes six components all in one for easier, more precise installation •Suspension products such as kingpin kits available for heavy-duty trucks •GateReader SVT sensor can be placed on fleet lot’s gate to track mileage as trucks enter and exit, with data available on a web portal www.forconstructionpros.com/21808874

What does it take to be better? You have to be strong. Be smart. Be resilient. Be innovative. You’ve got to go above and beyond. And that’s precisely why people choose JCB construction equipment time and time again: Because good enough is never good enough.

Check out our full line of JCB products at your local dealer or visit JCB.com today.

/JCBNA @JCBNA JCBNA www.jcb.com

RDO Equipment

Undercarriage condition has a major influence on used equipment valuation. With so much at stake, it is advisable to have the undercarriage inspected by a trustworthy product expert.

Choose Used Dozers WISELY

Take steps to ensure a used crawler dozer acquisition doesn’t come with costly surprises.

The current machinery environment is creating challenges that may require rethinking acquisition strategies. Start with an understanding of market conditions.

According to Ritchie Bros., tight supply and unprecedented demand are driving recordbreaking equipment prices. “Supply chain issues have had a direct impact on production of new equipment, which has certainly had an impact on used equipment prices,” says Doug Olive, senior vice president, pricing, Ritchie Bros. “The tight supply and unprecedented demand we have been driving at Ritchie Bros. has seen equipment and truck pricing hit record highs through our various marketplaces.”

According to the October 2021 Market Trends report (available for free at rbassetsolutions. com/market-trends-report), prices for used earthmoving and vocational trucks are up 12% and 35%, respectively.

“The supply chain issues have resulted in used equipment pricing that is very high,” agrees Doug Thayer, Sr., marketing manager, bidadoo. “Without new equipment available, trades are pushed back, forcing more utilization and higher hours before dispersal.”

In particular, the acquisition of high-value earthmoving equipment requires careful analysis. There are several reasons to consider the purchase of a used dozer, especially in this supplylimited environment. When a brand-new machine isn’t an option, used equipment presents an opportunity for contractors to expand their fleet.

A lot will depend on your fleet needs and the intended use. “Purchasing a used dozer can be a great fit if a buyer is unable to afford the cost of new; the use doesn’t require a late-model machine; or for when the buyer needs a backup machine,” says Thayer. “The focus on specific makes and models may be necessary, pending the availability of specific brand parts and service options in the buyer’s area. It may also be worthwhile for the buyer to check with their equipment operators to see if they have preferences.”

Olive adds, “There are a variety of factors to consider when looking to add a used dozer to your fleet, most notably: make, model, hours, condition, year and price. Depending upon what is needed for the job, you will also want to make sure you have the right blade, ripper (single- or multishank) or winch. Technology also plays a key tole, with GPS and inclination monitors to help with productivity and mounted cameras for improved safety.”

DETERMINE APPLICATION AND BUDGET

Identify the size of dozer needed and research the sales prices for these units.

“For a contractor who is looking to add a used dozer to his fleet, budget will determine the equipment hour range they will be shopping for. They should also find out how the equipment was previously used,” says Thayer. Hours only tell part of the story. Some applications are harder on equipment than others. “If possible, find out the type of environment the dozer was used in. Environment also plays a role in how the contractor will be utilizing the dozer, along with how long they may need it.”

Application determines the correct choice. “In terms of finding the right machine, No. 1 is consider your specific needs for the machine,” says Si Hanna, general manager of remarketing, RDO Equipment Co. “What environments will it be in, what applications, how frequently will you use it? A lot of that will factor into finding the right machine in terms of size, hours and remaining life.

“As far as finding a good machine and not one that’s going to be an unreliable money pit, that is all about eliminating the unknown — eliminating the chance for surprises,” Hanna

adds. “That goes back to having trust in the seller and having a full picture of the machine’s history in terms of applications, environments, service work and replaced or relifed parts.”

PAY ATTENTION TO CRITICAL COMPONENTS

With crawler dozers in particular, there are several areas that deserve special attention to ensure a successful purchase. Not all used machines are equal. You must conduct a thorough investigation on the used dozer prior to purchase. Ask to see a full evaluation of the machine, including hours, records of maintenance intervals and a complete history of the machine.

“The key items that deserve special attention when inspecting a used dozer include the engine, transmission and drivetrain,” says Thayer. “These will all be considered major repairs if there are problems.

“For the engine, are there any oil leaks or loose belts? For hydraulics, look for any signs of a leak. For the blade, look for any plate lines or weld marks, both of which mean it has excessive wear, so you’ll want to make sure further repairs aren’t needed,” Olive advises. The undercarriage is often the Achilles heel of a used crawler tractor. Due to the cost of replacement, the condition of the undercarriage is one of the key factors in finding the best deal.

Machine age isn’t as much of a concern as the operating hours. Particularly, it is useful to understand the hours on the undercarriage. If it is a highhour machine, you want to find out when the undercarriage was replaced.

“Generally, the undercarriage makes up close to 20% of the value of the dozer, so it’s important to understand its condition,” says Olive. “When inspecting the undercarriage, take a close look at the bearings and track pads. Flattened bearings could be a sign of excessive wear. And if the grouser bar on the tracks is worn down to the level of the pad bolts, the pads will likely need to be replaced.”

“The undercarriage is a wear item and costs to keep those components in good condition should be built into a purchase decision, as well as groundengaging tools like cutting edges and ripper teeth,” notes Thayer. “The true condition of an undercarriage can be measured to determine wear and the remaining life. Those measurements obtained and deducted from what the components are when new gives a percentage of life left. Buyers should look at all of the key wear components of the undercarriage — this includes the tracks, rollers, sprockets and idlers. A full undercarriage replacement can add up quickly.”

Excessive undercarriage wear or unusual wear should raise a red flag. Also check the undercarriage for cracks, rust and leaks.

A quality undercarriage inspection can help ensure that you don’t have any unexpected repairs. It can also give you a good estimate of exactly how much undercarriage life is left. Just because an undercarriage looks good during the walkaround doesn’t mean there are no significant problems. These would be identified during the detailed undercarriage inspection.

One issue to check for closely is uneven wear. “It’s important to remember that allowing one or more components to wear down too far before being replaced can cause what is known as ‘runout.’ When this happens, it can get expensive due to all the components that require replacement at the same time,” says Thayer.

There are other items that deserve careful attention. “Many things get overlooked, such as the condition of the blade mounting pins and bushings, push arm trunnions and equalizer pins,” says Thayer. “Those components can take plenty of abuse, and if not greased

This 1979 Caterpillar has a fairly recent paint job. It is very clean and has been well maintained throughout its life. The paint job is not hiding things like rust and decay.

regularly, fail to the point of requiring expensive repairs.”

He adds, “It is not a pleasant surprise to learn that one may need to hire a welder to do a weld, line bore and pin and bushing replacement to tighten up a machine to work as the manufacturer intended. Also, on non-high-tracked machines, the buyer should check for cracks and oil leaking from final drives under the back of the machine.”

HISTORY AND SUPPORT CAN TRUMP PRICE

Maintenance records can help take the guesswork out of a dozer purchase. Request to see a full evaluation, including hours, maintenance records and complete history, as well as its applications.

“Maintenance history is an important factor when purchasing a used dozer,” says Thayer. “It is part of knowing the story of that equipment. For many veterans in the industry, knowing the history of the used dozer and who the previous owner was is the most important factor.”

Just because a machine appears to be in good condition doesn’t mean it actually is. Don’t be fooled by first appearances. “Look for

“Generally, the undercarriage makes up close to 20% of the value of the dozer, so it’s important to understand its condition.”

— Doug Olive, Ritchie Bros.

Most manufacturers provide at least two styles of blade mounting. This dozer is equipped with push arm blade mounting.

Do some research before buying a used machine. Shown is a Caterpillar with OROPS, a high-track configuration and a C-frame mounted blade.

bidadoo

Reputable sellers can add peace of mind when buying used. Shown is a cabbed-up, lowtracked machine with a C-frame blade mount sold through bidadoo.

cosmetic improvements that may hide poor equipment conditions,” says Thayer.

During an actual or virtual walkaround, you will want to take special note of signs of wear beyond what would be normal for the machine’s hours and previous application.

With some private sellers and auctions, the maintenance history might not be available or may not be complete. Dealer rental units and units that were maintained through a dealership are more likely to come with complete documentation. “There are a few advantages of working with a reputable equipment dealership to find a used dozer, one of the biggest being service after the sale,” says Hanna. “This is something an auction and private seller cannot provide. It’s the parts availability, scheduling service and even some of the add-ons that a dealer can offer. At RDO, we also have an entire customer support team that offers a lot of dedicated support like machine monitoring and technology support. Dozers are often equipped with GPS machine control technology, so that support is crucial to consider.”

He adds, “Reputable dealers can also show full history of the machine, including service, oil scans, anything rebuilt or replaced — essentially everything done on the machine. Our certified technicians maintain our rental fleet and do thorough inspections on any trade-in dozers we’d sell. In many cases, they still have warranty on them.”

Reputable sellers can also add peace of mind when buying used equipment. “Buyers may want to look at purchasing an extended warranty on qualifying machines, or work with their local dealer for a service contract,” says Thayer. “Working with your local dealer can also help you source specialty attachments as needed.

“When evaluating buying from an auction or a dealer, buyers should weigh the benefits of each model,” he continues. “Auction pricing is most often less than buying a ‘retail’ used machine from a dealer and opens up a lot of inventory options. That said, having a dealer relationship when it comes time for repairs or servicing can be extremely important for your ongoing fleet operations.”

AUCTIONS PROVIDE MORE OPTIONS

Cost and options can favor auctions. “One advantage of auctions is the possibility of getting the used dozer at a lower cost vs. retail channels,” says Thayer. “Additionally, some online auction companies offer logistic support to aid the buyer in selecting equipment shipping options to their location.”

Some online auction companies also allow the buyer to purchase equipment from anywhere; they’re not limited to acquiring the dozer from a specific location. “Moving a dozer to sell it only to move it again once sold adds cost and inefficiencies to traditional or live auction events,” Thayer comments. “Being 100% online, bidadoo doesn’t amass equipment and people to hold an auction event to sell equipment. All of our critical mass happens online.”

“In a tight market like today, selection is so important,” says Olive. “At Ritchie Bros., we have tens of thousands of items available in our upcoming inventory at any given time and a variety of marketplaces to buy from, each with their own benefits. Our traditional site auctions with online bidding are completely unreserved, meaning the buyers set the price, not the owner or the auctioneer — each item goes to the highest bidder, regardless of price. We also have weekly featured auctions each Thursday on IronPlanet.com.

“If you can’t wait until the next site event, there are premier items with Make Offer and Buy Now options on Marketplace-E, and our newest equipment listing service Ritchie List, which has already surpassed 40,000+ items,” he adds.

With live site auctions, the buyer must do the necessary research. “The disadvantage of acquiring a dozer via a live auction is that the onus is on the buyer to assess the quality of the equipment being sold — call it ‘buyer beware’,” says Thayer. “To minimize the risk, buyers should do a physical inspection themselves or pay someone to do it for them. At bidadoo, we offer detailed condition reports, video demonstrations of the equipment operating and detailed photos. In addition, every machine is sold with the bidadoo 100% guarantee that it will be delivered as described or the buyer can receive a 100% refund of their purchase.”

“It’s always important to do your research before buying,” Olive agrees. “With Ritchie Bros., we offer inspection reports with IronClad Assurance as well as high-res photos and videos of items for inspection online. For our site auctions, you can inspect and test items in person. We also provide maintenance records and can connect you with the previous owner to learn more about how the item was used. Anytime you are buying something second-hand, it’s great to know the owner and how they cared for the equipment. These are expensive machines and the more you know, the more confident you can be when bidding and buying.”

Hanna adds, “When buyers think about taking the auction route, the immediate advantage that comes to mind is you can get a great deal. That is sometimes true. But when buying at an auction, you also may get a machine that runs today but has issues in a few weeks. You are accepting that risk of the unknown.” Private sellers provide a third avenue to used acquisition. “There are a lot of private sellers out there and oftentimes good deals can be found,” says Thayer. “That said, buyers need to do their homework when buying from an unknown company or individual. Be sure you do your due diligence to not only vet the machine but also the seller. Be sure to understand your recourse if something were to go wrong. In the end, buying used equipment can be a good option if you source from a trusted and transparent seller.” ET