8 minute read
Cracksealing & Joint Sealing
Glenzoil 20 Plus
Emulso Corporation
Glenzoil 20 Plus • Replaces conventional blotting materials • Spray onto hot-melt crack sealant • Available in 5- and 55-gal. sizes • Traffic can resume immediately after use • No clean-up after use
ForConstructionPros.com/10086607
CrackPro 260 Heated Hose Machine
SealMaster
Oil-Jacketed melter for hot pour cracksealing materials.
• 260-gal. melter/applicator • Oil-Jacketed • Insulated with 1.5-in. ceramic, covered by 16 gauge steel • Diesel fired burners • Heated applicator hose
ForConstructionPros.com/12227606
Crack Squeegee
Pavement Tool Manufacturers Inc.
• "V" and "U" shapes • Gum or silicone blades • 4-ft. wood ferruled handle or 6-in. aluminum handle • Push or pull designs • Blades for cold or hot applied materials
ForConstructionPros.com/10086632
Hot Pour Sealants
McAsphalt Industries Limited
For sealing cracks and joints in asphalt and concrete pavements. • Full range of products from Direct Fire to extra low modulus • Meets ASTM-AASHTO-DOT requirements and specifications
ForConstructionPros.com/10086818
QuikJoint
Quik Pave Products, Inc.
The roll-out, peel and stick rubberized asphaltic product is used primarily on flexible pavements to minimize water infiltration into joints and seams; improving long term performance and improved appearance of the flexible pavement. • Quick installations • Easy clean-up • No need for hot tar kettles • Uniform thickness and width
ForConstructionPros.com/10084528
Grazor GZ401H Pavement Surface Prep Router
Billy Goat Ind.
Removes vegetation, debris, and oxidized material from sidewalls for crack sealing preparation. • 360° swiveling • 4.5-hp Subaru with cyclonic air filter • 5-position height adjustment, solid steel wire bristles, and 8-in. pneumatic rear tires
ForConstructionPros.com/10086609
RMV Crack Sealer
Spaulding MFG. Inc
The RMV Crack Sealer comes in two sizes, 125- and 225-gal., and can melt down any rubber sealant for seal coating on the market. • Electric heated hose and overnight heating capability • Oil-jacketed system is fully insulated, and is designed to keep material at correct temperatures for long periods of time • Recirculating inlet, high volume material pump
ForConstructionPros.com/10086892
UPM Kold Flo Pourable Crackfiller
UNIQUE Paving Materials Corp.
KOLD-FLO Pourable Crack Filler is a modified asphalt emulsion crack filler and sealer that is ideal for repairing cracks in pavements and other asphalt and concrete surfaces. • Fast-curing driveable in 30 minutes • For filling and sealing cracks from weather’s destructive cycle • Available in 55-gal. drums, 5-gal. pails • Pourable and ready to use from the container
ForConstructionPros.com/10085408
KERA 145HD Rubberized Crack Filling Kettle
Marathon Equipment Inc.
Marathon's KERA 145HD rubberized crack filling kettle features a patented heated hose and wand delivery system.
• Built-in overnight heaters • 145-, 260 and 400-gal. capacities • Easily accessible diesel or propane burner system • PRE12034 • Automatic temp control • Hydraulically driven agitation • Optional 80 DFM air compressor
ForConstructionPros.com/10086962
Super Flex Cold Pour Crack Sealer
Allstates Coatings Company
A rubberized asphalt emulsion designed for sealing or filling cracks up to 1-in. wide on both asphalt and concrete pavement surfaces. • Ready to use on driveways, parking lots, walkways, playgrounds • Basic pourable cracksealers to super fast-dry high solids cracksealers
• Reduces moisture from entering the subgrade • No high temperature tracking problem
ForConstructionPros.com/12122371
Cracksealing & Joint Sealing
All-In-One Asphalt Crack Maintenance Trailer
KM International
Designed to accommodate the Crack Jet II, Km 55 Melter, MA 10 applicator, it’s equipped with storage area for material and tools • 10 D Pin Tie Down Points • On/Off Ramp • Utility Storage Area • Dimensions: 159-in. x 86-in. x 35-in.
ForConstructionPros.com/12252023
Heat Lance
Crafco, Inc.
The Heat Lance is used to dry and prepare pavement surfaces for repair. • Heats up to 2,600 degrees, a velocity of 3,000-ft. per second • Comes standard with a wheel kit and 40-ft. hose • Featuring separate valves which control the mixture • Lance weight is 9.2-lbs
ForConstructionPros.com/12269099
Crack Cleaner
Ring-O-Matic Inc.
Use the Ring-O-Matic Crack Cleaner for applications such as expansion joint prep work. • Wheeled carriage positions a jet of high-pressure water from a rotary nozzle • Brush-like skirts create a shielded environment around the unit while it vacuums the water and debris into a vacex unit’s storage tank
ForConstructionPros.com/12283149
CC-100 Crack Chasing Saw
MK Diamond Products, Inc.
Designed to cut or widen cracks in asphalt or concrete surfaces for repair. • Two 2-in. vacuum ports • V-segment crack chasing blades • Blades are available in .250in., .375-in. and .500-in. widths
ForConstructionPros.com/12258761
Cold Pour Crack Fillers
Neyra Industries
Prepare asphalt surfaces for optimal sealcoating conditions. • Cold pour crack fillers like
Gatormat and Plyolastic provide our customers with increased durability and workability during the site preparation process
ForConstructionPros.com/21084285
PLEXI-Melt Sealant
Crafco, Inc.
PLEXI-Melt is an innovative high strength, low density, hot-applied sealants and mastics that quickly and thoroughly melts. • The packaged material is much easier to handle as blocks • Block design melts much faster than conventional sealant block configurations, is weather resistant and can be stored up to one year • Shape of PLEXI-melt block melts 58% faster than traditional
ForConstructionPros.com/12322254
Pro Crack Cleaner
Little Wonder
The Pro Crack Cleaner cleans cracks and crevices in asphalt and concrete surfaces quickly and easily. • Clearing away debris and undergrowth is extremely important before laying down crack filler and applying sealant • Dual belts to the brush clear crevices quicker and more thoroughy • Honda GX120 engine • Large heavy-duty 9-in. diameter twisted wire wheel brush ideal for cleaning out expansion joints and cracks in asphalt or cement • Brush depth adjustable up to 4-in.
ForConstructionPros.com/12269068
TruFlex Rubberized Crack Sealant
SealMaster
A highly rubberized crack sealant designed for sealing cracks in asphalt or concrete pavements, offers coldpour convenience with hot pour performance. • Mix with sand for filling large cracks and alligatored areas • High softening point and toughness helps resist ripping and tearing in high temperatures • Superior UV and fuel resistance
ForConstructionPros.com/20859181
OJK-V Asphalt Crack Sealer
Stepp Manufacturing Co., Inc.
The OJK-V (Vertical) Kettle is capable of heating, melting and applying all grades of rubberized asphalt, crack sealer, joint sealants, and waterproofing compounds. • Heats material from ambient temperature to application temperature in 60 minutes or less • Trailer-mounted, completely self-contained • Available in 75- and 125-gal. models
ForConstructionPros.com/20979927
Crack Filler-Sealer
Dragon Asphalt Equipment, LLC
The Dragon Crack Filler-Sealer is ideally suited for contractors that need more than the typical crack filling push cart. • Holds approximately 30 gal. • 20-ft. heated hose pivots on a small boom which allows for easy access to cracks anywhere in the road • Add crack filling material blocks to tank via easy access side door • Each system is completely enclosed in a crate that fits easily into any standard 53-ft. tractor trailer • Can be heated up while in transit
ForConstructionPros.com/12263051
Pro Patch 55 Mastic Melter
KM International
The Pro Patch 55 is designed specifically to heat both mastic material and rubberized crack filling material. • Thermostatically controlled with triple wall insulation and material is ready to pour in 1 hour • Hydraulically driven 360° agitation system • 60,000 btu propane burner • Use standard crack fill rubber or mastic material
ForConstructionPros.com/20989057
BPM500 Cracksealing Machine
Trade Industry Company AB (TICAB)
Designed for heating and pouring sealant for repair work on pavement. • Engine:Kubota/ Könner &
Söhnen /Lombardini • Beckett burner • 130-gal • Thermal oil jacket • Electrically heated hose • Temperature controller • With or without trailer
ForConstructionPros.com/21118447
TARR TAPE INSTANT
Pavemade Tech
This self-sealing Tarr Tape doesn't require torching and is used to permanently repair or join asphalt, concrete, roofs and sports surfaces. • Press-on with hand, drive over, or pound with mallet • Traffic ready instantly • 40-ft.-long 2-in.-wide airport grade rubberized crack sealant • Waterproofs and prevents future damage
ForConstructionPros.com/21282920
Generator for Melter/Applicators
Fabco Power Inc.
The Power Mite 110 AC-powered generator runs off a belt and is a perfect fit for a heated hose crack fill machine. • Puts out 70-110 AC volts • Heats electric hose melter/applicator • Great results on roads for many years • Family owned for more than 50 years
ForConstructionPros.com/21095008
DENSOBAND Joint Sealing Strip
Denso North America
The DENSOBAND is a polymer modified bitumen strip for sealing vertical joints in road and pavement construction and maintenance to prevent the ingress of water. • Uniform, watertight, flexible seal • Minimum maintenance • High adhesion strength, high durability • Withstands asphalt movement and thermal expansion • Prevents cracking and propagation • Hand or machine applied
ForConstructionPros.com/21796777
MA4 Longitudinal Joint Sealing
Cimline Pavement Maintenance Group
The MA4 was designed to make longitudinal joint sealing easy for any paving crew to perform. • Non-CDL license or and due to the tanks size no endorsements are required • The setup and operation is basic, allows the crew to perform the job when the timing is right • Capacity: 410 gal.
ForConstructionPros.com/21096327
Melter/Applicator
Soft Heat Mfg.
The SH- MA10 is a self-contained cracksealing melter/applicator that relies on infrared technology to reduce startup and recovery times. • Inner and outer tanks are built of 14-ga. steel • Four 1/4-in. thick steel wheels • Stay-cool handle, no-splash lid • 3-in. steel screed with seal-off plate for clean starts and stops • Built-in hand agitator block-off plate to seal the material vat
ForConstructionPros.com/21202508
Hot Air Lances
LAB Manufacturing
Lab Hot Air Lances produce super-heated flamefree hot air designed to remove moisture and debris from asphalt cracks and surfaces. • Remove moisture and debris from potholes, asphalt cracks, and surfaces before sealing • Stainless-steel construction • No moving parts • Temperature and air volume controls
ForConstructionPros.com/10087439
Non-Sag Silicone Highway and Pavement Joint Sealant
Pecora Corporation
Pecora 301NS Silicone Pavement Sealant is a onepart, ultra-low modulus. • Non-sag formulation makes it ideal for applications on flat and sloped surfaces • 301NS has unprimed adhesion to concrete, metal and asphalt substrates, superior weather resistance while remaining flexible at extremely low temperatures
ForConstructionPros.com/21440209
ECS250/400
Etnyre International
The speed of the heating and circulation systems on the ECS250/400 results in less crew idle time, higher production and lower cost per shift on every crack sealing job. • Operator console is centrally located and monitors operating status, material temperature, engine controls and custom set points • Two 21-in. x 36-in. loading doors • 45-60 minutes heating time to circulate • Flush-free system
