info@forpackaging.net
www.forpackaging.net
TF XLM – COMPACT NEW IS AN AUTOMATIC HEAT SEALING MACHINE FOR TRAYS
SEQUENCE OF THE STATIONS
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net
info@forpackaging.net
www.forpackaging.net
1. Trays loader and descharge on the operation area AUTOMATIC HEAT SEALING LINE begins from an automatic loader 2 lanes integrated on the top by feeding conveyors and phase plug.
Emergency buttom
photo 1 Automatic descharging area with phase plug
photo 2 details of the adjustable guides to insert the trays on the loading plate of the machine
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net
info@forpackaging.net
www.forpackaging.net
2. feeding conveyor Group The function is feeding the sealing station, whereas the trays are sealed through transfer bars fixed to 2 chains mechanically pushed in progress by the engine -
Loading space available 2 mt. (4 free advancing passages ) The machine can work until 2 trays for each cycle in the standard version ( photo 2A ) And until 4 trays each cycle in version optional photo.2Â°ďƒ Conveyor belt movement is completely adjustable from the Control panel : speed, accelleration, deceleration, operation And break times.
To a greater risk prevention, A photocell has been installed, which stops the machine if any object is detected in its reach, in full compliance with the provisions European safety.
3. unwinding / rewinding Group 3. Clutch for cylinder reel holder
Inlet reel holder
It unwinds automatically the appropriate length a reel of film in the welding zone and rewinds the scrap after the operation of welding and cutting
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net
info@forpackaging.net
www.forpackaging.net SEALING film pulling through motorized rollers
System powered by rollers for towing and carrying out of the film. The tension of the film and adjusting of the clutch are mechanical: the rigidity of the clutch varies depending on the diameter of the reel for the production.
OPTIONAL This group, as optional, can be equipped with a system for the recovery of the print. This allows you to center the film centered correctly on each tray. XML NEW COMPACT can be equipped, always available as an option, By a coding system or thermal transfer molding. 4. Sealing/Cutting station
PHOTO 4
The trays are automatically placed in the supports by the bars of the positioning of the conveyor belt
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net
info@forpackaging.net
www.forpackaging.net
The station is composed of an upper mold and a lower die photo.4A
-
photo 4B
The lower matrix contains the ground-support, where is deposited the tray, while the upper mold contains the plaque of welding and the cutting blade. -
The two parts are customized in function of the shape of the container to be welded. Once the trays are in position, the support is lifted by means of a mechanical- or air system, depending on the version of your machine, and they place so the operations of welding and cutting.
-
The film is cut around the outside of the container and heat-sealed on the container.
-
The sealing plates are regulated directly by the electronic control panel .
-
All operating parameters are defined from the control panel of the machine
-
The sealing station has a protective stainless steel door on the front: the machine stops and does not start immediately when the door is open
-
Furthermore an electronic sensor verifies the correct positioning of bars, and if the position is not correct, an alarm message appears on the control screen.
-
The design and the construction of the welding station enables a quick and easy replacement of the mold and is directly connected via a connector as shown in the picture, in order to make the operation of tool change even more rapid and practical.
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net
info@forpackaging.net
www.forpackaging.net 5.Discharge station
The trays are sealed and ejected from bars of transfer
Rollers
on an inclined plane with a roller conveyor in stainless steel
Photo 5. tunnel chute trays with rollers card protections
6.Control panel The machine is controlled by a touch screen and all operating parameters are controlled and configured simply through this unit. All data can be stored in a menu and retrieved later when it is necessary to switch quickly from one type of production to another. The operator can record up to 10 different recipes. The machine is also equipped with a self-diagnosis to detect errors and solve problems as quickly as possible. The electrical panel is positioned vertically and easily accessible opening. This feature makes possible the rapid access to the rear of the welding station in case of maintenance.
7.Electric frame and accessibility The sealed electrical panel of this machine opens easily allowing quick access to electrical components, terminals ...but also allows access to the rear of the electro-valve that manages function vacuum / gas, this is a feature that will be appreciated by those who work of maintenance and cleaning.
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net
info@forpackaging.net
www.forpackaging.net
A wide range of optionals and accessories available to adapt the machine with the different demands of applications: extension modules
dosage
The length of the feed conveyor can be extended on the basis where appropriate
One or more feeders can be integrated on the conveyor belt for automatic filling Kit for the oxygen necessary for the product MEAT
Wheels: for rapid shifts in production workshop culinary ..
Marking thermal transfer printer with high resolution 300 dpi, intelligent management of the tape, touch screen multi-language software for the creation of your labels printing
It is available also the version dual-head!
forpackaging srls Sede legale: 21040 Jerago con Orago via Varese,17 - P.IVA / C.F. 03430620124 Sede recapito documenti: VIA E.TOTI, 1- 28040 VARALLO POMBIA NO tel.+39 391 3014907 fax +39 1782745271 Sede operativa e produzione: 28040 Borgo Ticino (NO via CastellettoTicino,Km1,20 fax +39 178 2745271 web www.forpackaging.net