Ch12 by Foschi

Chapter 12

DENTAL MACHINES

Air Driven Dental Units

VetPro® 1000

Veterinary Instrumentation and Henry Schein Veterinary Equipment are very pleased to have been appointed exclusive UK Distributor for Midmark. The Midmark family also includes the Matrx range of Anaesthesia Machines and Cardell Monitors. With over 90 years of healthcare manufacturing and clinical use experience, Midmark are recognised as leaders in veterinary dentistry, anaesthesia and monitoring.

VETERINARY DENTISTRY

INSERIRE RIUNITO FOSCHI

Veterinary dentistry, in many practices, remains an unglamorous cousin to ‘real’ veterinary surgery. In fact good dental health contributes hugely to any pet’s well being. Veterinary dentistry should also be making a significant contribution to the financial well being of any practice. Dentistry is one of the few areas where there is potential for expansion. A brief examination of the mouth of most pets will reveal teeth which need attention. Owners are very familiar with the concept of routine check ups and dental work. Dental equipment is not hugely expensive when compared to much other capital equipment and unlike many other practice investments dental equipment quickly pays for itself.

All veterinary practices providing dental services should have access to an ultrasonic scaler plus a unit with slow speed and high speed handpieces for polishing and tooth sectioning during extraction. Ideally a dental x-ray unit could be added to this, as around 70% of a tooth is below the bone crest, therefore invisible without good radiographs.

Within this section of the catalogue you will find a range of dental equipment from a simple piezo ultrasonic scaler to the new fully featured Midmark machine. Some dental units are supplied with integrated suction driven by the venturi effect using compressed air. In our experience this type of suction is very hungry on air necessitating a large, expensive compressor. In addition the nature of the suction tubes of venturi type are difficult to clean and sterilise. Stand alone suction units are inexpensive and much more efficient plus they can be used elsewhere in the clinic. See Chapter 21 page 394.

Air Driven Dental Units To obtain the truly high speeds required for drilling and burring an air driven dental unit is necessary. Veterinary Instrumentation can supply two levels of air driven dental machines. The Midmark VetPro® 1000 is state of the art with exclusive oil-free technology, whilst the Veterinary Instrumentation Mini Cart is a straightforward unit containing all the essentials of an air driven dental machine. Both are offered as a complete set up for cutting and polishing but can be modified by the addition of further handpieces and accessories.

SERVICING AND SUPPORT Veterinary Instrumentation offers national coverage for servicing and repairs through its network of authorised dental engineers.

To arrange for an engineer to visit please identify your region (Number 1-10 on the map) and call

For 2014 we are pleased to announce that we will be offering a Training Voucher included in the purchase price. The Training Voucher entitles you to a full days training at a recognised training provider using the VetPro or alternatively a 1/2 day training session undertaken at your practice by a vet.

(0845) 130 9596 If possible please describe the nature of the fault, the brand/ type of machine and the date of purchase.

292

DENTAL MACHINES

VetPro® 1000

Handpieces VetPro®

Introducing the 1000 Mobile Dental Delivery System from Midmark. Our exclusive, oil-free technology means there is no oil to contaminate your handpieces, providing a clean, dry, aseptic work environment for you, your staff and your patients. And best of all... no more oil changes. That’s better for your staff and better for the environment.

A quiet High Speed Handpiece, weighted and balanced for improved feel. 350,000 RPM’s at 32 PSI. Autoclavable. Supplied with a 6 month warranty.

Integrated oil free compressor means no worries because it eliminates potential oil exposure to patients and messy changes! You will also be investing less often in handpiece replacement with no degradation from oil contamination.

HIGH SPEED HANDPIECES MID002-1155 High Speed Miniature Head MID002-1157 High Speed Fibre Optic

ACCESSORI FOSCHI

Handpieces automatically activate when removed from holders allowing you to focus on the client. You can switch from handpiece to handpiece without touching a button – the unit will automatically adjust as the handpiece is lifted from its cradle.

£275.00 £415.00

High and Low Speed Handpieces included.

Integrated Piezo Scaler included, featuring LED light Newtron Handpiece to radically improve visibility during use. Standard Midwest 4-Hole connection type.

Quiet – Compressor has a sound level of 40dB.

A highly versatile Low Speed Handpiece. Accepts disposable or metal Prophy Angles and straight Handpiece Burs. Range 0-5000 RPM at 40-45 PSI. Non-reversible. Supplied with a two year warranty.

Quickly toggle between the dual 1-litre water bottles with a flick of a switch without de-pressurizing the system.

LOW SPEED HANDPIECES MID002-1156 Little Pro Hygiene MID002-1159 Autoclavable Prophy Angle P464 Prophy Cups (x144) Snap On

External quick connects for water and air make setup easy.

Other Handpieces and accessories are shown on page 307-308.

Fibre Optics to High Speed Handpiece to enable proper lighting of oral cavity

Medical grade castors and 3m hospital grade power cord allow you to position the cart where you need it.

These corrosion resistant scaling tips are made exclusively by Satelec using patented procedures. Each tip is individually tested and ‘tuned’ enabling more powerful cavitation, better spray control and perfectly-controlled vibration energy at the end of the instrument.

Dimensions 47cmD x 59cmW x 93cmH Supplied with: High Speed Fibre Optic Handpiece

•

Low Speed Handpiece

•

Pack of Disposable Prophy Angles

•

Starter High Speed Bur Set

•

Integrated Scaler includes selection of Tips

VetPro® 1000 MID8000-006 VetPro® 1000 with Fibre Optics & LED Scaler mid9a477001 Amtimicrobial Fabric Cover (optional)

£50.00

Acteon Satelec Scaling Tips

Durable construction. Its durable construction withstands the rigors often found in clinical settings. The VetPro® 1000 has a completely enclosed system to protect internal mechanics from contaminants and animal hair, made from a sturdy ABS plastic to withstand the strains caused by frequent usage.

•

£455.00

Acteon Satelec Scaling Tips MID016-120300 Universal Tip No. 1 MID016-120303 Voluminous Calculus Tip No2 MID016-120304 Shallow Pockets Tip No.10P MID016-120301 Subgingival Tip No. 10Z MID016-120302 Periodontics Micro Universal Curette Tip No.3 H3

£5,450.00

£77.50 £77.50 £77.50 £77.50 £105.00

Midmark Acteon Urolithiasis Probes B A

Rodent Dental Items C

Rodent Dental items are now available to fit the VetPro® 1000 machine. To run the Rodent Dental Bur and Guard Kit you will need the Low Speed Handpiece plus the 1:1 Straight nose Cone listed below.

RODENT DENTAL ITEMS mid002-1277-01 mid016-1605-00 mid016-1605-01 mid002-1664-00

Kit - Low Speed Handpiece without Swivel 0-20,000rpm 0.52£ Straight Nose Cone Attachment 1:1 0.51£ Straight Nose Cone Attachment 4:1 Reduction 0.541£ Rodent Dental Bur & Guard Kit 0.501£ 293

Use ultrasonics to quickly and efficiently break up stones located in the urethra. Urolithiasis probes are compatible with the Satelec ultrasonic scalers used in the Vetpro dental delivery system and are connected to the scaler handpiece in the same way as scaling tips.

Midmark Acteon Urolithiasis Probes MID016120305 Dog Probe Short - L 102mm (A) MID016120307 Dog Probe Long – L 156mm (B) MID016120306 Cat Probe (C) MID002123800 Kit 3 Veterinary Urolithiasis Probe set – one of each above

£85.00 £85.00 £85.00 £215.00

DENTAL MACHINES

Digital Dental X-ray

VetPro® DR Sensor for Advanced Digital Dental Imaging VetPro® DR delivers superior soft-tissue visualization as well as exceptional crown and root definition, all with low noise so you get the quality digital images you need to provide your patients with the best dental care. Plus, the durable design of the new VetPro® DR sensor takes the worry out of digital image capture.

Midmark VetPro® Digital Dental X-ray

RAYENCE + ARIA Cable is Kevlar® reinforced for exceptional durability Hermetically sealed, waterproof design means no problems during routine cleaning

Advanced CMOS technology delivers outstanding image quality

Radiography is critical for the accurate evaluation of periodontal disease, as 60% of the disease is hidden below the gum line. VetPro® systems from Midmark are significantly more accurate than film-based systems, as well as being faster and easier to use. State-of-the-art software allows you to view images immediately, with no chemicals, no wasted developing time. High-tolerance, friction-less joints provide amazingly smooth arm movement and heavy duty dual braking system keeps it in place for precise and stable positioning. A unique tube head handle lets you effortlessly put the X-ray source where you want it, with just one hand.

High speed USB connection captures images 37% faster Rounded corners means easier positioning in tight spaces for better capture of roots The VetpPro® Xray system has built-in cabling for the DR Sensor. Sensor plugs in at the articulation above the tube head. Stowage for the sensor is provided on the arm above.

VetPro® Digital Dental X-ray Systems from Midmark are the best solution for your dental X-ray needs: •

The most intuitive, easy to use, veterinary specific software and control panel on the market (select a tooth and take a shot)

•

C technology allows you to adjust kVp D (60, 65 and 70) and mA (4, 5, 6 and 7) perfect for today’s digital environment

•

ost flexible system available -M customize settings to meet your needs

•

.4 mm focal spot produces visibly higher 0 resolution images VetPro® Specifications

VetPro® DR Sensors Specifications

Line voltage: 120-230 VAC +/- 10% 50-60 Hz

Dimensions: Size 1 (film size equivalent) 37 mm x 24 mm x 6 mm

Line load: maximum current amps

Size 2 (film size equivalent) 43 mm x 30 mm x 6 mm

Exposure time: 20 ms to 2 seconds

Active Area: Size 1 (film size equivalent) 30 mm x 20 mm

Tube potential: 60, 65 or 70 kVp

Size 2 (film size equivalent) 36 mm x 26 mm

Tube current: 4, 5, 6 or 7 mA Cone length: 20 cm (8 inches)

Number of Pixels: Size 1 (film size equivalent) 1580 lines x 1050 pixels

Minimum inherent filtration: 2 mm AI equivalent at 70 kVp

Size 2 (film size equivalent) 1896 lines x 1368 pixels

Focal spot: 0.4 mm (IEC 336)

Pixel Size: 19 μm x 19 μm

Duty factor: 1:15

Remote exposure hand switch included Warranty: 2 years, limited

Theoretical Resolution: 26 lp/mm

Mobile – (Wall mount also available)

Levels of Grey: 4096

Base: 26.9” w x 36” l (68.3 cm x 91.4 cm)

Connection Type: High speed USB 2.0

Height: 79.9” (195.3 cm)

Sensor Cable Length: 3 meters

Arm reach: 56” (142.2 cm) 294

DENTAL MACHINES

Imaging Software Use your VetPro® DR System with our easy-to-use imaging software. Look and formatting is familiar and easy to learn.

RAYENCE + ARIA

Acquire, enhance and store images with ease.

Our software features canine and feline tooth templates organized using the Triadan System, is DICOM compliant, and able to work with leading practice management systems and PACS servers. An on-line recorded webinar demonstrating the software can be found on the web page below. Follow the link for Progeny Imaging Software Webinar. http://www.midmarkanimalhealth. com/tools/training/midmark-onlinetraining

midmark VetPro® digital dental x-ray MIDdcvm-g0a/s2 Midmark VetPro® Complete Mobile Dental X-ray Unit No.2 Sensor £11,495.00 MIDdcv5-g2a/s2 Midmark VetPro® Complete Wall Mount 56” Arm No. 2 Sensor £11,150.00 MIDdcv6-g2a/s2 Midmark VetPro® Complete Wall Mount 66” Arm No. 2 Sensor £11,150.00 MIDdcv7-g2a/s2 Midmark VetPro® Complete Wall Mount 76” Arm No. 2 Sensor £11,150.00 MIDdcv8-g2a/s2 Midmark VetPro® Complete Wall Mount 82” Arm No. 2 Sensor £11,150.00 midxsvs-01 VetPro® DR No. 1 Sensor 3 Metre Cable £5,450.00 £6,295.00 midxsvs-02 VetPro® DR No. 2 Sensor 3 Metre Cable mid500-433 Sanitary Sheath Size 2 Pack of 500 £155.00 mid500-433/100 Sanitary Sheath Size 2 Pack of 100 £40.00 mid500-432 Sanitary Sheath Size 1 Pack of 500 £155.00

Shipping and Installation along with a voucher for training is included in the price of the unit.

295

DENTAL MACHINES

296

DENTAL MACHINES

www.vetinst.com

Options Rabbit Option

?? Rasping is a very inefficient method of levelling rabbit and rodent molars. The best method is the use of side cutting burs. Our Rabbit Bur Kit includes two of each of the most useful handpiece burs which fit the 1:1 Straight Nose Cone. They are housed in a custom made stainless block which also has holes for your favourite friction grip burs for the high speed. To minimise damage to the cheek and tongue, a Soft Tissue Protector is highly recommended. The Soft Tissue Protector and Burs were developed by David Crossley. See our rodent dentistry section page 324 for further details. HANDPIECE OPTIONS - RABBIT 001792 Rabbit Bur Kit (6 Burs in Block) BA170 1:1 Straight Nose Cone 001793 Soft Tissue Protector 001794 Rabbit Bur Option (includes all of above) D797 Bud Shaped Acrylic Bur HP fitting HL563D Very Long Side Cut Diamond Bur (smoother cut and less heat than carbide)

Diamond Disc Option

Diamond coated discs make short work of sectioning teeth and shortening rodent incisors. To minimise risk to surgeon and patient always use a disc safety shield. Fits onto 1:1 Straight Nose Cone. If you do not have an airdriven high speed unit this may be your only tooth cutting option. Diamond discs are very dangerous to soft tissue â&#x20AC;&#x201C; shielded or not. HANDPIECE OPTIONS - Diamond DISC 001789 Diamond (Double Sided) Disc 001791 Diamond Disc Safety Shield 001790 Diamond Disc Option (includes both of the above) BA170 1:1 Straight Nose Cone

297

DENTAL MACHINES

Burs

Roto-Pro Burs When used in a High Speed Handpiece these burs produce vibrations at 20,000cycles per second.

Bur Kits

Each Bur Kit contains a range of useful Burs for each application.

Very aggressive action – use with extreme caution. Dog and cat enamel is thin and easily damaged.

Each comes with a simple to follow guide for bur usage.

BUR KITS D751 D753 D754

ROTO-PRO BURS R350 Flame (Pack of 6) R351 Perio (Pack of 6)

Dog High Speed Bur Kit (FG) Cat High Speed Bur Kit (FG) Low Speed (HP) Bur Kit (for SNC)

Small Animal Speciality Burs in Block Dental Burs To aid correct bur selection, see chart opposite and use the following steps

Identify shaft type i.e. FG, RA, HP or HL (top row)

Identify the head shape (green column)

Select the diameter of the head (white column)

All the Burs you need for routine veterinary dentistry in one autoclavable block. The Set includes 12 slow speed (HP Shank) Burs and 12 high speed (Friction Grip FG) Burs. Includes: Side cutting

Round/ Pear

Code

Number

FG698

FG701

FG702

HP702

HP703

HP560

Application

Section teeth Rabbits in HP

FG1/4

FG4

HP4

Creating tooth access to pulp chambre or caries removal

HP8

Fine bone removal

FG330

HP332

Widen periodontal ligamen space in extraction.

Choose between Carbide or Diamond head Please ask a member of our Vet Tech Team if the bur you are looking for is not shown.

small animal speciality burs in block BURKIT24 Block Including Burs (24) BURBLCK24 Block Alone See overleaf for full Bur Chart 298

Bur Prefix

Pack Size

Carbide

Diamond

5FG

Five

£15.75

£19.25

5RA

Five

£15.75

£19.25

Single

£4.50

£5.50

5HP

Five

£15.75

£19.25

Single

£6.00

5HL

Five

£22.75

£27.75

DENTAL MACHINES

www.vetinst.com

Dental Burs FG

Carbide Diamond 5 Pack 5 Pack

Carbide Carbide Diamond Diamond Singles 5 Pack Singles 5 Pack

Head Shape

Diameter (approx)

Small Round

0.5

5FG 1/4

Medium Round

1.4

5FG4 5FG4D

5RA4 5RA4D

HP4 5HP4 HP4D 5HP4D

Large Round

1.8

5FG6 5FG6D

5RA6 5RA6D

HP6 5HP6 HP6D 5HP6D

Extra Large Round

2.1

5FG8 5FG8D

5RA8 5RA8D

HP8* 5HP8 HP8D 5HP8D

Extra Small Taper Fissure

0.8

5FG698

5RA698

HP698 5HP698

Small Taper Fissure

1.2

5FG701

5RA170L 5RA170LD

HP701 5HP701

Medium Taper Fissure

1.6

5FG702 5FG702D

Medium Taper Long Head

1.6

5FG702L 5FG702LD

Large Taper Fissure

2.1

HP703 5HP703

Extra Large Taper Fissure

2.3

HP704* 5HP704 HP704D 5HP704D

Extra Small Flat Fissure

0.9

5FG556

5RA556

HP556 5HP556

5FG557

5RA557L 5RA557LD

HP557L 5HP557L HP557D 5HP557LD

Medium Flat Fissure

1.6

5FG5660

5RA560

HP560 5HP560

Large Flat Fissure

2.3

Small Inverted Cone

0.6

Small Flat Fissure

Medium Inverted Cone

1.8

Extra Small Pear

0.6

5FG329

Small Pear

0.8

5FG3330

5FG331

1.2

5FG332

5FG1557

Large Domed Fissure

1.2

HP702L 5HP702L HP703D

5FG35 5FG35D

Extra Large Inverted Cone

Medium Domed Fissure

5RA702L 5RA702LD

5FG331/2

1.4

Large Pear

HP702 5HP702

HP563 5HP563 HP563D 5HP563D

Large Inverted Cone

Medium Pear

5FG 1/4D

5FG37

5RA37 5RA37D HP39 5HP39 HP39D 5HP39D

5RA330

HP332 5HP332

5FG1558 5FG1558D

Additional Burs Extra Long

Diameter (approx)

Carbide Carbide Diamond Diamond Singles 5 Pack Singles 5 Pack

Extra Large Taper Fissure

2.3

HL704

5HL704

HL704D

5HL704D

Large Flat Fissure

2.3

HL563*

5HL563

HL563D

5HL563D

* in Rabbit Bur Kit

299

Please note all bur sizes are approximate and subject to availabilty

DENTAL MACHINES

Introduction

Piezo Scaler with Detachable, Autoclavable Handpiece

It is possible to scale and polish using only hand instruments. It is, however, extremely time consuming. Teeth must be polished after scaling or plaque and tartar will quickly reform.

UDS-P

Ultrasonic Scalers

SOSTITUIRE SOSTITUIRE CON UDS4 CON FOSCHI

Ultrasonic scalers work by delivering high frequency vibrations to a metal tip. The vibration may be generated by a variety of mechanisms: • Sonic. Slow and inefficient, often reaching less than 10,000Hz

• Magneto restrictive (cavitron type). The tip is vibrated by multiple layered metal strips and a magnetic field. Typically their type generates a lot of heat which requires a lot of cooling water. 35-38000Hz. • Piezo. The movement at the tip is generated by applying a current across a crystal. Typically uses less water. • Ferrite Rod. The tip movement is generated by an electrical field around a ferrite rod. This system is capable of producing higher frequencies up to 42,000Hz.

Veterinary Instrumentation stock Piezo and Ferrite Rod Types (iM3 42-12). We think these are most appropriate for veterinary use.

Please note that all Ultrasonic Scalers should be used with care as inappropriate use will result in damage to enamel.All scaler inserts should be autoclaved after every patient, to avoid efficiently passing periodontal pathogens and retroviruses on to new patients.

Supplied with G1 x 2, G2, G4 & P1 Tips

The UDS-P Scaler has a Detachable Autoclavable Handpiece. This means that Handpieces can be switched between patients or at least regularly sterilised. Alternatively different Piezo Tips can be fitted to different Handpieces. This Scaler also features automatic frequency tracking with an LED output display.

piezo SCALER with detachable, autoclavable handpiece & irrigation 1022 Piezo Scaler with Autoclavable Handpiece UDS-P £345.00

Piezo Scaler with Detachable, Autoclavable Handpiece with Inbuilt Water Supply.

Piezo Scalers

UDS-L

Supplied with 5 tips this is a reliable unit at a very reasonable price. If you cannot afford the 42-12 this is the best scaler for you. It will require a water source. Either plug straight into your VI Dental Unit or purchase our pump up water bottle. CE marked.

Supplied with G1 x 2, G2, G4 & P1 Tips

UDS-J

This top of the range Piezo Unit has a Handpiece which is detachable for cleaning and autoclaving. Separate Handpieces may be set up with different Tips. The controls are simple with an LED power readout. Supplied with 5 different replaceable, Scaling Tips. This Unit is supplied with its own integrated pressurised water supply system. Alternatively the USD-L may be plumbed into your dental unit. Automatic frequency tracking.

Supplied with G1 x 3, G2, & P1 Tips PIEZO SCALER 1008 Piezo Scaler UDS-J 1010 Pump up Water Bottle (not necessary with VI Air Driven Units) T0580 Piezo Scaler Tip

piezo SCALER with detachable, autoclavable handpiece & irrigation 1020 Piezo Scaler with Autoclavable Handpiece UDS-L £395.00

£295.00

Piezo Scaler Accessories piezo SCALER accessories 1021 Spare Autoclavable Handpiece 102G1 G1 Scaler Tip 102G2 G2 Scaler Tip 102G4 G4 Scaler Tip 102P1 P1 Scaler Tip

Spare handpiece for 1022 and 1020

£165.00 £38.50 £38.50 £38.50 £38.50

Piezo Scaler Tips G1

General purpose scaler for calculus removal

Slightly stronger for heavy calculus

300

A lighter version of G1

Use for subgingival tartar.

DENTAL MACHINES

Plaqsearch

Automatic Water Supply for Dental Scalers

Disclosing solution for use with cotton buds. Plaqsearch is supplied in a cost-effective useful 30ml bottle, which avoids the problem of drying out before use sometimes found with individual swab presentations. Old plaque shows blue, new plaque shows red. Plaqsearch HS1115182 Plaqsearch 30ml

£6.95

Plaque Disclosing Solution

Shown attached to Ultrasonic Scaler (not supplied) This handy water supply with pump is suitable for scalers which connect to either a dental machine or a pump-up water bottle. The small pump is unobtrusive, about the size of a pack of playing cards, and the bottle will stand on the benchtop next to the scaler unit. This will get rid of the need for pumping up plastic bottles, which invariable are dust and dirt traps. If your scaler is currently attached to your dental machine, the addition of this unit would make the 2 independent of each other allowing more flexibility of use. automatic water supply for dental scalers 1023 Automatic Water Supply for Dental Scalers

£55.00

CLS • • • • FIV

Freshens mouth Disinfects mouth & machine Improves bur cutting Minimises cross contamination with FeLV &

Used in the water system of Dental Units CLS freshens and sterilises the mouth. When used as coolant for High Speed Handpieces cutting efficiency is improved. It prevents transfer of FeLV and it can also be flushed through the air turbines to sterilise and lubricate them using the iM3 CLS flushing system.

Many owners are very aware of the need for scaling and polishing on a regular basis. However, should any convincing be necessary the ‘iC Plaque Disclosure’ is ideal for the purpose. Simply swab around the mouth with the convenient dispenser and the plaque shows up as a vivid pink. Plaque disclosing solution ICIM3 iCplaque (Box of 72)

The unique composition of CLS allows use of Chlorhexidine in all dental equipment. Standard Chlorhexidine crystallises out from solution and will damage your equipment. Do not use regular Chlorhexidine in Dental Units as it will crystallise out in the Handpieces rendering them inoperative. Purchase of the larger pack sizes gives significant savings.

CLS CONCENTRATE CLS1 CLS Solution 250ml CLS6 CLS Solution 250ml Pack of 6 CLS12 CLS Solution 250ml Pack of 12 301