UFO-360Ⅲ LED High Bay Light DATASHEET
KML UFO-360 LED High Bay Light, excellent performance with 110-120lm/w .Meanwell HLG type LED driver, CREE XT-E, SAMSUNG LED chips, 5 years warranty. With mature LED heat sink technology, KML UFO HIGH BAY series is KML domestically developed products. We are always devote to offering best products and service for you.
Feature ● ●
Unique designed UFO shape , lighter and smaller. CREE-XTE & SAMSUNG LED , LM80 standard, higher installation height and higher Illuminance when compared with SMD 3030.
●
40°, 60°, 80° optical design.
●
Meanwell HLG Series led driver
●
Configurable Smart Dimming
●
Wide aluminum plate design, heat dissipation fast and evenly
●
Angle for flexible bracket : 30°, 60°, 90°, 120°, 150° .
●
Installation: Rack mounting & Hook hanging
●
Working temperature: -30°C ~ + 50°C
●
IP65 protection level
Application Warehouses, libraries, workshops, shopping malls, supermarkets, shops, restaurants, sports centers, cinemas, hospitals, clothing stores, bars and other indoor lighting places。
www.kmlled.com
support@kmlled.com
1
No.116, Xiangshan Rd, Songgang, Bao’an, Shenzhen, China Phone: +86-755-29868817 Fax: +86-755-81496009
UFO-360Ⅲ LED High Bay Light DATASHEET Product Details
Heat sink and LED driver separated, better heat dissipation efficiency
Integrated heat sink, heat dissipation fast and even。
CREE XT-E & SAMSUNG LED LM80 standard Reflective paper 92% Transmittance tempered glass strong no scratch Double face silicon rubber, IP65 grade Glass mask pressure ring, practical and beautiful!
40°; 60°; 80° beam angel available
Pictures
www.kmlled.com
support@kmlled.com
2
No.116, Xiangshan Rd, Songgang, Bao’an, Shenzhen, China Phone: +86-755-29868817 Fax: +86-755-81496009
UFO-360Ⅲ LED High Bay Light DATASHEET Replacement Table
Product Dimension
UFO LED high bay
Metal halide
120W
320W
150W
400W
185W
600W
200W
600W
Lighting Distribution Curve
60°beam angle
40°beam angle
80°beam angle
www.kmlled.com
support@kmlled.com
3
No.116, Xiangshan Rd, Songgang, Bao’an, Shenzhen, China Phone: +86-755-29868817 Fax: +86-755-81496009
UFO-360Ⅲ LED High Bay Light DATASHEET Specification
SKU
KMLUFO360120Ⅲ
KMLUFO360150Ⅲ
KMLUFO360185Ⅲ
KMLUFO360200Ⅲ
120W
150W
185W
200W
13200~14400 lm
16500~18000 lm
20350~22200 lm
22000~24000 lm
>0.95
>0.95
>0.95
>0.95
HLG type
HLG type
HLG type
HLG type
CCT
4000K , 5000K
4000K , 5000K
4000K , 5000K
4000K , 5000K
CRI
80+
80+
80+
80+
AC100-277V
AC100-277V
AC100-277V
AC100-277V
LED chips
CREE XT-E & SAMSUNG
CREE XT-E & SAMSUNG
CREE XT-E & SAMSUNG
CREE XT-E & SAMSUNG
Efficiency
110-120 lm/w
110-120 lm/w
110-120 lm/w
110-120 lm/w
Black, Gray
Black, Gray
Black, Gray
Black, Gray
IP65
IP65
IP65
IP65
40°, 60°, 80°
40°, 60°, 80°
40°, 60°, 80°
40°, 60°, 80°
Aluminum
Aluminum
Aluminum
Aluminum
8.0 kg
8.2 kg
8.5 kg
8.5 kg
Working temperature
-30°C~+50°C
-30°C~+50°C
-30°C~+50°C
-30°C~+45°C
Lifespan
50000 hours
50000 hours
50000 hours
50000 hours
warranty
5 years
5 years
5 years
5 years
Power Lumen output PF Driver
Input voltage
Housing color IP grade Beam angel Material Net weight
Packing Information
SKU
Power
PCS/CTN
Net Weight
Gross Weight
CBM
KMLUFO360120Ⅲ
120W
1
8.00 KG
9.50 KG
425*215*435 mm ≈0.04 m3
KMLUFO360150Ⅲ
150W
1
8.20 KG
9.50 KG
425*215*435 mm ≈0.04 m3
KMLUFO360185Ⅲ
185W
1
8.50 KG
10.00 KG
425*215*435 mm ≈0.04 m3
KMLUFO360200Ⅲ
200W
1
8.50 KG
10.00 KG
425*215*435 mm ≈0.04 m3
www.kmlled.com
support@kmlled.com
4
No.116, Xiangshan Rd, Songgang, Bao’an, Shenzhen, China Phone: +86-755-29868817 Fax: +86-755-81496009
UFO-360Ⅲ LED High Bay Light DATASHEET Installation Feature：
Warranty：
UFO LED high bay, designed for industrial lighting. Adopting the newest LED lighting
1. All products use constant LED driver, LED chips, 5 years warranty.
technology, longer lifespan, lower maintenance cost, higher efficiency. Unique designed optical light distribution can focus the light to the lighting area, improving
(under the condition that products are rightly kept, installed, used , and
the luminaire efficiency, taking the place of traditional HID lamps. The wire is made
maintenance. Once the products fail because of improper used or installed
of flame retardant cable which reaching 90VO grade. Wire in blue (AC input wire),
or break the products operation manual, we are not responsible for this
brown, (AC input wire) and lime-green( earth wire).
situation. We will repair or replace the broken products during the warranty. We will charge extra material and labor cost if over warranty.
Yellow/Green : earth wire
2. Please read the instruction manual careful, all rights reserved . Brown : L input
3. All products are subject to change without notice.
Blue : N input
Maintenance manual： 1. Cut off power before maintenance
Notice：
2. Clean the glass of LED street light regular to keep good light transmission.
1. In case of fire, explosion, electronic shock, the install, inspect and maintenance must be operated by professional people. 2. Please make sure the power off before operation！Luminaries must be electronic
3. Clean the dusk on the surface and heat sink regular to keep good heat dissipation. 4. Do not use water or strong corrosive liquid to clean the lamp, dry cloth is better. 5. Replace LED driver: use screwdriver to open the cover, fetch out the driver.
grounding！ 3. Please make the voltage supplied is available for the luminaries！
You can see three AC wires, Match brown wire with “L”, Blue with “N”, Kelly
4. Please make the luminaries working under the limited working temperature！
or yellow with “G”. The red or white wire on driver is the positive electrode,
5. In order to guarantee enough air convection, luminaries should not be installed in narrow space！
black wire is the negative electrode. Notice, please confirm the positive and negative electrode has not met extremely instead
Hook hanging：
Bracket Hanging：
Attention：
Attention：
Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp. Luminaires should not be installed where it is draught, in case of shaking and unstable.
Lamp must be vertical suspension and the supporter should can bear at
Hook installation steps：
Holder installation steps：
1. Cut off power before operation.
1. Cut off power before installation.
2. Knowing the inside diameter of the luminaires then Choose
2. Measure the hole size on the holder，choose suitable screw.
least 3 times weight of the lamp.
suitable hook for the luminaires.
3. Fix the screw at the place where luminaires will be installed and
3. Fix the hook before installation and make the it can bear
it should can bear over 3 times the weight of the luminaires
over 3 times weight of the lamp
4. Screw up the screws at both sides of holder, then connect the
4. Connect the lamp with hook and make it is safe.
hold hole with screws, tighten it up.
5. Connect the power wire：Brown,“L”，connect to LIVE；
5. Connect the power wire：Brown,“L”，connect to LIVE；
Blue, “N”，connect to NEUTRAL; Lime-green，connect to
Blue, “N”，connect to NEUTRAL; Lime-green，connect to
EARTH/GROUND
EARTH/GROUND 6. Light up the luminaires !
6. Light up the luminaires！
www.kmlled.com
support@kmlled.com
5
No.116, Xiangshan Rd, Songgang, Bao’an, Shenzhen, China Phone: +86-755-29868817 Fax: +86-755-81496009