DUMPS BASE
EXAM DUMPS
NETWORK APPLIANCE NS0-525
28% OFF Automatically For You NetApp Certified Implementation Engineer - Data Protection (NCIE-Data Protection)
1.Which two NetApp products reduce the backup time and create a consistent backup for a primary Oracle target? (Choose two.) A. SnapMirror for Open Systems B. Open Systems SnapVault C. SnapManager for Orade D. SnapProtect Answer: CD
2.You want to generate performance-related reports and alerts using the OnCommand Unified Manager 6.x server. Which two additional tasks must be completed to enable these features? (Choose two.) A. Install and configure OnCommand Workflow Automation. B. Configure a connection between the Unified Manager server and a Performance Manager server. C. Create a local user with limited Event Publisher role privileges D. Configure a connection between the Unified Manager server and OnCommand System Manager. Answer: BC
3.You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation. Which tool would accomplish this task? A. Hardware Universe B. System-Level Diagnostics tool (SLDIAG tool) C. OneCollect D. Interoperability Matrix Tool Answer: D
4.You are using a MetroCluster configuration. Which two Fibre Channel switch vendors are supported for backend replication? (Choose two.) A. ATTO Technology B. QLogic C. Cisco D. Brocade Answer: CD
5.A client has a 2 TB volume and has enabled the function to automatically delete
Snapshot copies in scenarios where capacity will be exceeded. They have set the trigger for this action to the volume | snap_reserve value. In this scenario, what would trigger this function? A. The volume reaches 98% and the snap_reserve is at capacity. B. The volume reaches 95% and the space_reserve is at capacity. C. The volume reaches 95%. D. The snap_reserve reaches capacity. Answer: A
6.You have a VMware VSphere environment with SRM and NetApp SRA fully configured. Which two statements are true? (Choose two.) A. NetApp SRA supports both LUN attached and NFS mounted datastores. B. NetApp clustered Data ONTAP supports a mixed ALUA configuration where some igroups have ALUA enabled and others do not. C. NetApp SRA supports the use of the FC protocol at one site and the iSCSI protocol at the other site. D. NetApp SRA supports the failover of SnapVault and SnapMirror relationships. Answer: AC
7.A customer is running clustered Data ONTAP on primary and secondary clusters. The customer is using SnapVault to back up volumes between the clusters. The customer has good Data ONTAP 7-Mode knowledge and needs to set up two new SnapVault relationships between the clusters on a weekly schedule. Which solution would you recommend to satisfy this requirement? A. Use OnCommand Workflow Automation. B. Use the system shell command line interface. C. Use the node shell command line interface. D. Use OnCommand System Manager. Answer: D
8.After manually implementing a SnapVault relationship between two volumes on two separate clusters, the primary Snapshot copies are working fine. The baseline has been transferred successfully. The relationship is shown as healthy and idle. However, the updates are not taking place as scheduled on the secondary system. What is causing the problem? A. The cluster peering has not been set properly. B. The SnapMirror policy schedule has not been enabled. C. The SnapMirror access has not been configured. D. The Snapshot copy label has not been set correctly in the used SnapMirror policy.
Answer: D
9.You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database. What must you do to ensure that the data in the database is consistent when you create the Snapshot copy? A. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle. B. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN. C. Use SnapDrive for Unix to take the Snapshot copy of the database LUN. D. Use SnapManager for Oracle to take the Snapshot copy backup. Answer: C
10.A customer wants to create a new SnapMirror relationship to provide only disaster recovery for their organization. Which relationship type and policy type should they specify in this scenario? A. DP and MirrorAndVault B. XDP and MirrorAllSnapshots C. DP and XDPDefault D. XDP and XDPDefault Answer: B
11.You want to perform a health check of the MetroCluster synchronization status. Which two actions should you perform? (Choose two.) A. On the cluster shell, use the metrocluster replication show command. B. In On Command Unified Manager, go to the Cluster in the MetroCluster tab. C. On the cluster shell, use the metrocluster check run command. D. Run the MetroCluster Health Check tool from your administration host. E. In On Command System Manager, go to the Cluster in the Metro Cluster section. Answer: AB
12.You want to find an automated way to handle space utilization in volumes. You have limited space available in your aggregate. Which solution would solve this scenario? A. Enable Snapshot autodelete. B. Enable volume level QoS. C. Enable aggregate compression. D. Enable volume autosize.
Answer: A
13.You have enabled the SnapMirror global throttling feature to restrict bandwidth that is used by SnapMirror operations over the network for both incoming and outgoing transfers in ONTAP. In this scenario, which two statements are correct? (Choose two.) A. Global throttling is not enforced until the combined bandwidth of per-relationship transfers exceeds the value of global throttle. B. Global throttling is enforced at a node level and works with the per-relationship throttle feature for SnapMirror. C. Global throttling is enforced at a cluster level and works with the per-relationship throttle feature for SnapMirror. D. Global throttling is enforced at a cluster level and does not work with the perrelationship throttle feature for SnapMirror. Answer: AC
14.You are using SnapLock for SnapVault to protect Snapshot copies on secondary storage. In ONTAP 9.3, which source aggregate feature is supported in this scenario? A. RAID-TEC B. SnapLock Compliance C. SnapLock Enterprise D. 32 bit Answer: A
15.A previous administrator had configured an external backup system to use nodescoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP. How do you make this change in ONTAP? A. Turn off node-scoped NDMP on the cluster. B. Turn off node-scoped NDMP on the SVMs being backed up. C. Restart the NDMP service on the SVMs being backed up. D. Restart the NDMP service on the cluster. Answer: A
16.A customer is running clustered Data ONTAP and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore -file-list. Which two statements are true about this operation? (Choose two.) A. The maximum number of files that you can select at the same time is one.
B. You can choose any destination volume for the restore, as long as the volume type is RW. C. The maximum number of files that you can select at the same time is eight. D. You can choose any destination volume for the restore, as long as the volume type is DP. Answer: BC
17.You have completed the baseline copy for a new inter-cluster SnapMirror relationship. How do you verify the baseline without making the destination volume writable? A. Create Snapshot copy and a FlexClone volume clone of the SnapMirror destination volume. B. Create a FlexClone volume clone of the SnapMirror source volume and then verify the clone. C. Break the mirror and verify the source and destination volumes. D. Break the mirror and verify the destination volume online. Answer: A
18.You are creating a new FlexVol volume for a customer. The customer wants the most storage efficiency possible. The data in the volume will be NAS files. Which two volume settings would meet the customer requirements? (Choose two.) A. Enable volume autosize with the mode set to grow_shrink. B. Enable storage efficiency and compression on the volume; set the percent snapshot space to 0. C. Enable storage efficiency and compression on the volume; set the percent snapshot space to 100. D. Enable storage efficiency but not compression on the volume; set the snapshot reserve to 100. Answer: AB
19.What are two capabilities enabled by Snapshot copies? (Choose two.) A. Change the volume language of a secondary Snapshot copy. B. Recover previous versions of a file that was deleted. C. Write to the Snapshot copy. D. Create a clone of a FlexVol volume. Answer: BD
20.You have a network outage that affects client access to site A. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.
Which two steps must you perform first? (Choose two.) A. Take the source volume offline. B. Break the SnapMirror relationship. C. Delete the SnapMirror relationship. D. Abort the SnapMirror relationship. Answer: AB
21.You are installing a MetroCluster for clustered Data ONTAP consisting of FAS8080s. How are the high-availability interconnects cabled? A. High-availability interconnects between the nodes are not needed. B. High-availability interconnects are cabled both locally and remotely between the nodes. C. Each high-availability pair controller is cabled to its local partner. D. High-availability interconnects are only needed for the remote connections between the nodes. Answer: B
22.What are two reasons why the status of the SnapMirror relationship is showing ~Healthy: false~? (Choose two.) A. A manual update has failed. B. It has missed a scheduled transfer. C. A transfer operation is in progress. D. The lag time has exceeded the threshold. Answer: AB
23.Which two policy types provide asynchronous replication? (Choose two.) A. hourly B. mirror-vault C. vault D. daily Answer: BC
24.A customer wants compression enabled on the SnapVault secondary volume. Which two statements are true? (Choose two.) A. A warning message is not displayed when you enable compression on a SnapVault secondary volume. B. Data transfers will be storage efficient after enabling compression on the SnapVault secondary volume.
C. Data transfers will not be storage efficient after enabling compression on the SnapVault secondary volume. D. A warning message is displayed when you enable compression on a SnapVault secondary volume. Answer: CD
25.A customer is using SnapVault to backup Snapshot copies from a primary volume to a secondary volume on a clustered Data ONTAP system. The retention on the secondary volumes must be 90 days. Volume autosize and SnapShot AutoDelete have been enabled for all secondary volumes. Which two settings will satisfy this requirement? (Choose two.) A. Modify the secondary volume with the CautosizeCreset true command. B. Modify the secondary volume with the Cspace-mgmt-try-first volume_grow command. C. Modify the secondary volume with the Cspace-mgmt-try-first snap_delete command. D. Modify the secondary volume with the Cautosize-increment 5GB command. Answer: AB
26.Which command shows a volume’s space usage, including metadata, within the aggregate? A. volume show-footprint B. volume show-space C. aggregate show D. volume show Answer: A
27.You have created a new CIFS share but it is inaccessible. After verifying the export policy, network connectivity, junction path, and permissions are all correct, you realize there is root volume loadsharing mirror in place. What should you do next to make the share accessible? A. Re-create the CIFS share. B. Update load-sharing mirror. C. Update the root volume policy. D. Modify the CIFS share permissions. Answer: A
28.You want to protect a clustered Data ONTAP volume with a SnapMirror relationship. You choose not to initialize the relationship during the Create Mirror
Relationship workflow. In this scenario, which two statements are correct? (Choose two.) A. You can only initialize the relationship later from the command line. B. You can initialize the relationship later from the protection window in OnCommand System Manager. C. The baseline Snapshot copy will not be transferred to the destination system. D. The baseline Snapshot copy will not be created on the primary system. Answer: AD
29.You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date. From My AutoSupport, which report would you use? A. Upgrade Advisor B. Visualization C. Transition Advisor D. Event Viewer Answer: B
30.Your customer wants to replicate data between two NetApp clusters in different data centers. Which two actions must be performed to accomplish this task? (Choose two.) A. Every inter-cluster LIF must be configured on the same port with a data LIF. B. One inter-cluster LIF on each node must be configured. C. Every controller in both clusters must have at least one inter-cluster LIF configured. D. A peer relationship must be created between the two clusters. Answer: BD
31.A customer has deployed an 8-Node Fabric MetroCluster solution. In this scenario, what information is replicated by the Configuration Replication Service (CRS) in ONTAP 9.3? (Choose two.) A. SVM configuration B. IPspaces C. disk assignments D. user created job schedules Answer: AD
32.Your customer wants to implement a SnapVault relationship, but is concerned that the initial transfer will use up all of their network bandwidth. Which solution should you recommend to the customer?
A. Use the SMTape functionality to back up the source volume to tape and use the tape to transfer the base snapshot copy to the destination volume. B. Set up a SyncMirror relationship to a NetApp controller in the same data center, than ship the controller to the destination site. C. Manually copy each directory from the source volume to the destination volume during times when the network utilization is low. D. Enable volume efficiency on the destination volume. Answer: A
33.You are in a SnapProtect v11 solution environment creating a new subclient with NAS data. Besides the subclient name, what other information is mandatory? (Choose three.) A. the backup schedule B. the retention policy C. the backup content path D. the storage policy E. the Snap Engine Answer: ADE
34.You are copying your data and replicating it off site. What is the called? A. a version B. a Snapshot C. a backup D. a demonstration Answer: C
35.Given the command shown below: snapmirror policy add-rule Cvserver vs1 Cpolicy policy Csnapmirror-label weekly Ckeep 52 What does this command do? A. It retains 52 weekly Snapshot copies on the source storage virtual machine. B. It retains 52 weekly Snapshot copies on the destination storage virtual machine. C. It retains 52 weekly Snapshot copies on the source volume. D. It retains 52 weekly Snapshot copies on the destination volume. Answer: B
36.Click the Exhibit button.
Refer to the Exhibit. clusterA, clusterB, and clusterC are in a mirror-mirror cascade relationship. clusterB is offline and not recoverable. You want to continue to protect clusterA. In this scenario, which statement is correct? A. Resume the relationship between clusterA and clusterC, creating a new baseline. B. Create a SnapVault relationship between clusterB and clusterC. C. Synchronize the relationship between clusterA and clusterC, avoiding a new baseline. D. clusterA will continue to be protected “as-is�. Answer: C
37.Due to legal compliance requirements, a financial institution needs to store and commit files to a non-erasable, non-rewritable state either forever or for a designated retention period. In this scenario, which ONTAP feature will satisfy these requirements? A. SnapDiff B. SnapLock C. FlexClone D. Snapshot Answer: B
GET FULL VERSION OF NS0-525 DUMPS
Powered by TCPDF (www.tcpdf.org)