Single-Tube MC50/Nanotruss Tru russ sss-sys -ssyysstteemss
Single-Tube MC50 Single Tube MC50050
50 x 2 mm, 50 cm with female receivers
MC50100
50 x 2 mm, 100 cm with female receivers
MC50200
50 x 2 mm, 200 cm with female receivers
MC50300
50 x 2 mm, 300 cm with female receivers
NanoTruss
Nanotruss EX Polished Available models:
NQ12EX050
50 cm
NQ12EX100
100 cm
Connector Kit for Boxcorner Boxcorner for Nanotruss NQ12EXBC Nanotruss (1 side)
Nanotruss EX Polished Baseplate NQ12EXBP
NQ12EXBCKIT
This boxcorner is an versatile solution to make modular constructions. It can easily make all kinds of 90째 corners. Make 2-way or up to 6-way configurations with the optional connector kits. Please note that this boxcorner has no connector kits included, order your desired number of connector kits separately (NQ12EXBCKIT).
Single-Tube MC50/Nanotruss 02_17_18_Truss+merchand_10_temp2011.indd 599
[Truss-systems]
599 08.03.11 17:54
Step-Truss PS30 Trruuss ss-s -ssysste -sys tems ms Step-Truss PS30 PS30-001V PS30001V
S-001V Corner 45° Vertical
A = 1000 mm
PS30-002V PS30002V
S-002V Corner 60° Vertical
PS30-003V PS30003V
Vertical
A = 800 mm
A = 500 mm
PS30-005V
PS30-016V
PS30-017V
PS30005V
PS30016V
PS30017V
S-005V Corner 135° Vertical
S-016V 4-way Vertical
PS30-004V
S-003V Corner 90°
PS30004V
Vertical
S-004V Corner 120°
A = 500 mm
PS30-050
S-017V T-cross Vertical
A = 500 mm
A = 710 mm
A = 710 mm
B = 500 mm
PS30-001H
PS30-002H
PS30-003H
PS30050
PS30003H
PS30100
Length
PS30001H
S-001H Corner 45° Horizontal
PS30002H
S-002H Corner 60° Horizontal
S-003H Corner 90° Horizontal
PS30150 PS30200 PS30250 PS30300 PS30400
A = 1000 mm
A = 800 mm
A = 500 mm
PS30-004H
PS30-005H
PS30-016H
PS30004H
S-004H Corner 120° Horizontal
A = 500 mm
600 02_17_18_Truss+merchand_10_temp2011.indd 600
PS30005H
S-005H Corner 135° Horizontal
A = 500 mm
Step-Truss PS30
PS30016H
S-016H 4-way Horizontal
A = 710 mm
Straight 500 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm
PS30-017H PS30017H
S-017H T-cross Horizontal
A = 710 mm
B = 500 mm
[Truss-systems] 08.03.11 17:54
Step-Truss PS30 Tru russ sss-sys -ssyysstteemss Step-Truss PS30 PS30-BP PS30BP
PS30-WM
Base plate for PS30
PS30WM
Conical Pin with Thread M6 PACPM6
Conical Spigot
Wall Mount Plate for PS30
PACSM
Conical Pin with Thread M8
M6 Thread for Pro-30 Truss
PACPM8
Conical Pin
For Pro-30 Truss
PACPM
Half Conical Connector
M8 Thread for Pro-30 Truss
PACS12
Accessories for Pro 30 Truss
Safety R Spring
M12 Thread. For Pro-30 Truss
PASS
For Pro-30 Truss
Spacer for PS30 Available models:
PASP10 PASP20 PASP30 PASP39 PASP50
10 mm 20 mm 30 mm 39 mm 50 mm
The PRO-30 is standard made of 50mm alu-pipe with a thickness of 2mm, or to an extra charge 48mm alu-pipe with a thickness of 3mm. This is the most known and used construction system for discotheques, stages, theatres and for many more applications. The PRO-30 is available in following models: 2 point (Step system), 3 point (Traingle) and 4 points (Square system). The system elements are joined with help of the proved conical connection coupling.
Specifications StepTruss/vertical Span in
m
Point load in
kg
lbs
188.8
416.2
76.4
168.4
35.2
77.6
18.4
40.6
•
•
•
•
•
•
•
•
•
•
•
•
Deflection in
mm
inch
2.88
0.11
2.22
0.09
1.82
0.07
1.82
0.07
•
•
•
•
•
•
•
•
•
•
•
•
Distributed load in kg
lbs
144.9
319.5
44.8
98.8
17.3
38.1
7.2
15.9
•
•
•
•
•
•
•
•
•
•
•
•
Deflection in
inch
3.60
0.14
3.00
0.12
2.63
0.10
2.59
0.10
•
•
•
•
•
•
•
•
•
•
•
•
mm
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Step figures are based on use in vertical position • not recommended
Step-Truss PS30 02_17_18_Truss+merchand_10_temp2011.indd 601
[Truss-systems]
601 08.03.11 17:54
Step-Truss FS30 Trruuss ss-s -ssysste -sys tems ms Step-Truss FS30 FS30-001V FS30001V
FS30-002V
Corner 45° Vertical
FS30002V
A = 1000 mm
FS30-005V FS30005V
Corner 135° Vertical
Corner 60° Vertical
FS30003V
A = 800 mm
A = 500 mm
FS30-016V
FS30-017V
FS30016V
A = 500 mm
FS30-003V
Cross 4 Way Vertical
FS30017V
FS30-004V
Corner 90° Vertical
A = 500 mm
FS30-050
T-Cross Vertical
A = 710 mm
A = 710 mm
Corner 120° Vertical
FS30004V
B = 500 mm
Length
Straight 500 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm
FS30050 FS30100 FS30150 FS30200 FS30250 FS30300 FS30400
The PRO-30 is standard made of 50mm alu-pipe with a thickness of 2mm, or to an extra charge 48mm alu-pipe with a thickness of 3mm. This is the most known and used construction system for discotheques, stages, theatres and for many more applications. The PRO-30 is available in following models: 2 point (Step system), 3 point (Traingle) and 4 points (Square system). The system elements are joined with help of the proved conical connection coupling.
Specifications
2m
3m
4m
5m
6m
320kg
160 kg
140 kg
120kg
100kg
Line load
15mm
20mm
48mm
68mm
98mm
230 kg
160 kg
100 kg
80 kg
60 kg
Point load
18mm
30mm
52mm
78mm
94mm
StepTruss/vertical Span in
m
Point load in
kg
lbs
188.8
416.2
76.4
168.4
35.2
77.6
18.4
40.6
•
•
•
•
•
•
•
•
•
•
•
•
Deflection in
mm
inch
2.88
0.11
2.22
0.09
1.82
0.07
1.82
0.07
•
•
•
•
•
•
•
•
•
•
•
•
Distributed load in kg
lbs
144.9
319.5
44.8
98.8
17.3
38.1
7.2
15.9
•
•
•
•
•
•
•
•
•
•
•
•
Deflection in
inch
3.60
0.14
3.00
0.12
2.63
0.10
2.59
0.10
•
•
•
•
•
•
•
•
•
•
•
•
mm
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Step figures are based on use in vertical position • not recommended
602 02_17_18_Truss+merchand_10_temp2011.indd 602
Step-Truss FS30
[Truss-systems] 08.03.11 17:55
Step-Truss FS30 Tru russ sss-sys -ssyysstteemss Step-Truss FS30 FS30-001H FS30001H
FS30-002H
Corner 45° Horizontal
A = 1000 mm
FS30-004H FS30004H
Corner 120° Horizontal
A = 500 mm
FS30002H
FS30-003H
Corner 60° Horizontal
A = 800 mm
A = 500 mm
FS30-005H
FS30-016H
FS30005H
Corner 135° Horizontal
A = 500 mm
T-Cross Horizontal
FS30017H
FS30-WM FS30WM
FS30BP
Base plate for FS30
A = 710 mm
For Pro-30 Truss
Half-conical Connector FACS12
Conical Spigot
8 cm, For Pro-30 Truss
FACSM
Wall Mount Plate for FS30
Conical Pin with Thread M6 FACPM6
M6 Thread for Pro-30 Truss
Spacer for FS30
M12 Thread
FASP20
20 mm
Step-Truss FS30 02_17_18_Truss+merchand_10_temp2011.indd 603
Cross 4 Way Horizontal
B = 500 mm
Conical pin FACPM
FS30016H
Corner 90° Horizontal
A = 710 mm
FS30-BP
FS30-017H
FS30003H
FASP40
Conical Pin with Thread M8 FACPM8
M8 Thread for Pro-30 Truss
Safety R Spring FASS
For Pro-30 Truss
40 mm
[Truss-systems]
603 08.03.11 17:55
Triangle-Truss DT22 Trruuss ss-s -ssysste -sys tems ms Triangle-Truss DT22 DT22-001 DT22001
DT22-002
T-001 Corner 45°
DT22002
A = 800 mm
T-002 Corner 60°
DT22003
A = 600 mm
DT22-005 DT22005
DT22-003
DT22006
down
DT22-011
DT22-012
DT22-013
DT22012 T-012 Corner 90° down right apex down
apex down
A = 400 mm
T-011 Corner 90° down left
B = 400 mm
C = 400 mm
DT22-015
B = 400 mm
C = 600 mm
C = 400 mm
DT22016
Horizontal
A = 580 mm
T-019 T-cross 3-way Vertical apex up DT22019
B = 400 mm
604 02_17_18_Truss+merchand_10_temp2011.indd 604
DT22020
4-way
A = 580 mm
DT22013
A = 400 mm
B = 580 mm
DT22017
Horizontal
A = 580 mm
DT22-010
T-007 Corner 90° apex
B = 400 mm
T-020 90° T-cross + down
B = 400 mm
C = 400 mm
5-way
A = 580 mm
Triangle-Truss DT22
DT22010 T-010 Corner 90° down right apex up
A = 400 mm
B = 400 mm
C = 400 mm
DT22-014
T-013 Corner 90° downleft
B = 400 mm
C = 400 mm
DT22014 T-014 Corner 90 Degrees up/down right
A = 400 mm
B = 400 mm
C = 600 mm
DT22-018
T-017 T-Cross 90° 3-way
B = 400 mm
DT22018 T-018 T-Cross 90° 3-way Vertical apex down
A = 580 mm
B = 400 mm
DT22-022
DT22-021 DT22021
T-004 Corner 120°
A = 400 mm
DT22-017
T-016 90 Degrees 4-way
DT22-020
DT22-019
A = 580 mm
B = 400 mm
A = 400 mm
DT22-016
T-015 Corner 90 Degrees up/down left DT22015
A = 400 mm
A = 400 mm
B = 400 mm
DT22007
A = 400 mm
DT22011
DT22004
DT22-007
T-006 Corner 90° apex up
A = 400 mm
apex up
T-003 Corner 90°
A = 400 mm
DT22-006
T-005 Corner 135°
DT22-004
T-021 90° T-cross + down
B = 400 mm
C = 600 mm
DT22022 T-022 90 Degrees T-cross + up/down 6-way
A = 580 mm
B = 580 mm
C = 600 mm
[Truss-systems] 08.03.11 17:55
Triangle-Truss DT22 Tru russ sss-sys -ssyysstteemss Triangle-Truss DT22 DT22-023
T-023 90 Degrees T-cross
DT22023
A = 600 mm
B = 400 mm
DT22-024
DT22-025
DT22024 T-024 90 Degrees Cross + down 5-way/apex down
DT22025 T-025 90 Degrees Cross + down 5-way/apex up
A = 580 mm
B = 580 mm
C = 400 mm
A = 580 mm
DT22-050
B = 580 mm
C = 400 mm
Length
DT22-BP DT22BP
DT22-WM
Base Plate for DT22
DT22WM
Decotruss Conical Spigot
Wall Mount plate for DT22
DT22050 DT22100
DA22CS
DT22150 DT22200 DT22250 DT22300 DT22400
Decotruss Conical Pin
Decotruss Safety Spring
DA22CP
Straight 500 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm
Conical Pin with thread
DA22SS
DA22CPM6
Spigot, Pin and Spring incl.!
DT22KIT
DT22KIT 3 x DA22CS, 6 x DA22CP, 6 x DA22SS
The DECO-22-truss is made of 32mm alu-pipe, with a thickness of 1,5mm. It is a lightweight system for decoration applications in offices and sales rooms or for product presentation. The DECO-22 is available in following models: 2 point (Step system), 3 points (Traingle) and 4 points (Square system). The system elements are joint with help of a blind clamped joint or with a 29 mm alu-pipe.
Specifications Triangle DT22 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Point load in
kg
lbs
103.6
228.4
91.7
202.2
82.2
181.2
74.3
163.8
66.8
147.3
60.5
133.4
55.1
121.5
50.5
111.3
45.4
100.0
35.8
78.9
Deflection in
mm
inch
4.32
0.17
7.89
0.31
12.95
0.51
19.52
0.77
27.08
1.07
35.84
1.41
48.04
1.89
58.91
2.32
66.24
2.61
71.44
2.81
Distributed load in kg
lbs
73.2
161.4
53.5
117.9
42.0
92.6
34.6
76.3
29.0
63.9
24.9
54.9
19.5
43.0
15.7
34.6
12.8
28.2
10.6
23.4
Deflection in
inch
5.22
0.21
10.95
0.43
20.08
0.79
33.44
1.32
51.20
2.02
74.25
2.92
92.86
3.66
113.19 4.46
mm
139.11 2.48
165.72 6.52
Triangle figures are based on use in position apex down
Triangle-Truss DT22 02_17_18_Truss+merchand_10_temp2011.indd 605
[Truss-systems]
605 08.03.11 17:56
Triangle-Truss PT30 Trruuss ss-s -ssysste -sys tems ms Triangle-Truss PT30 PT30-001 PT30001
PT30-002
T-001 Corner 45°
PT30002
PT30-005
A = 500 mm
PT30-011
apex up
A = 500 mm
B = 500 mm
C = 500 mm
left
A = 500 mm
Apex Up
A = 710 mm
down
A = 500 mm
B = 500 mm
C = 742 mm
PT30016
A = 710 mm
B = 500 mm
C = 500 mm
T-Cross Vertical 3-Way
B = 500 mm
606 02_17_18_Truss+merchand_10_temp2011.indd 606
4-way
A = 710 mm
PT30013
down
A = 500 mm
PT30-010
T-007 Corner 90° apex down
PT30017
A = 710 mm
B = 710 mm
T-020 90° T-cross + down
B = 500 mm
C = 500 mm
5-way
A = 710 mm
Triangle-Truss PT30
B = 500 mm
PT30-014
T-013 Corner 90° left apex
B = 500 mm
C = 500 mm
PT30014
right
A = 500 mm
T-014 Corner 90° up/down
B = 500 mm
C = 742 mm
PT30-018
T-017 90° 3-way Horizontal
PT30018
apex down
A = 710 mm
B = 500 mm
PT30-021 PT30021
PT30010 T-010 Corner 90° down right apex up
A = 500 mm
B = 500 mm
PT30-017
T-016 90° 4-way Horizontal
T-004 Corner 120°
A = 500 mm
PT30-013
T-012 Corner 90° right apex
PT30-020 PT30020
PT30007
A = 500 mm
B = 500 mm
PT30-016
T-015 Corner 90° up/down
PT30-019 PT30019
PT30012
PT30004
PT30-007
T-006 Corner 90° apex up
PT30-012
T-011 Corner 90° down left
PT30-015 PT30015
PT30006
PT30-004
T-003 Corner 90°
A = 500 mm
PT30-006
T-005 Corner 135°
A = 500 mm
PT30011
PT30003
A = 800 mm
A = 1000 mm
PT30005
PT30-003
T-002 Corner 60°
T-018 90° 3-way Vertical
B = 500 mm
PT30-022
T-021 90° T-cross + down
B = 500 mm
C = 742 mm
PT30022 T-022 90° T-cross + up/ down 6-way
A = 710 mm
B = 710 mm
C = 742 mm
[Truss-systems] 08.03.11 17:56
Triangle-Truss PT30 Tru russ sss-sys -ssyysstteemss Triangle-Truss PT30 PT30-023
T-023 90° T-cross
PT30023
PT30-024
PT30-025
T-024 90° Cross + down 5-way/apex down
T-025 90° Cross + down 5-way/apex up
PT30024
PT30-029
PT30025
Length
PT30029 A = 742 mm
B = 500 mm
A = 710 mm
B = 710 mm
C = 500 mm
A = 710 mm
B = 710 mm
PT30050
C = 500 mm
PT30071
PT30-BP
PT30-WM
Base plate PT30
PT30BP
PT30100
Conical Spigot
Wall Mount Plate for PT30
PT30WM
PT30150
For Pro-30 Truss
PACSM
PT30200 PT30250 PT30300 PT30400 PT30500
Straight 290 mm Straight 500 mm Straight 710 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm Straight 5000 mm
Spacer for PT30
Conical Pin
Conical Pin with Thread M6
Accessories for Pro 30 Truss
PACPM
Conical Pin with Thread M8
M6 Thread for Pro-30 Truss
PACPM6
PACPM8
M8 Thread for Pro-30 Truss
Length
PASP20 PASP30 PASP39 PASP50
Safety R Spring PASS
20 mm 30 mm 39 mm 50 mm
Half Conical Connector
For Pro-30 Truss
PACS12
M12 Thread. For Pro-30 Truss
Specifications Triangle PT30 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Point load in
kg
lbs
294.9
650.1
264.8
583.8
239.3
527.6
214.6
473.1
194.2
428.1
177.1
390.4
162.5
358.3
149.8
330.3
138.8
303.1
129.0
284.4
Deflection in
mm
inch
4.50
0.18
7.65
0.30
12.15
0.48
18.48
0.73
26.43
1.04
36.03
1.42
47.31
1.86
60.33
2.38
75.09
2.96
91.64
3.61
Distributed load in kg
lbs
212.6
468.7
153.7
338.9
120.1
264.8
84.4
186.1
62.3
137.4
47.7
105.2
37.5
82.7
30.4
67.0
25.0
55.1
15.4
34.2
Deflection in
inch
5.28
0.21
10.24
0.40
18.11
0.71
26.41
1.04
36,25
1.43
47.61
1.88
60.50
2.38
74.91
2.95
90.84
3.57
101.2
3.98
mm
Step figures are based on use in vertical position • not recommended
Triangle-Truss PT30 02_17_18_Truss+merchand_10_temp2011.indd 607
[Truss-systems]
607 08.03.11 17:56
Triangle-Truss FT30 Trruuss ss-s -ssysste -sys tems ms Triangle-Truss FT30 FT30-001 FT30001
FT30-002
Corner 45°
FT30002
A = 1000 mm
Corner 135°
FT30006
A = 500 mm
FT30-011 FT30011
A = 500 mm
B = 500 mm
C = 500 mm
FT30-015 FT30015
A = 500 mm
FT30019
A = 710 mm
Corner 90° Apex Up
B = 500 mm
A = 500 mm
Corner 90° + Up/Down Left
B = 500 mm
C = 742 mm
FT30016
A = 710 mm
Corner 90° + Down Right
B = 500 mm
C = 500 mm
B = 500 mm
608 02_17_18_Truss+merchand_10_temp2011.indd 608
FT30020
A = 710 mm
FT30013
Apex Down
A = 500 mm
FT30-010
Corner 90° Apex Down
B = 500 mm
FT30017
B = 710 mm
A = 710 mm
B = 500 mm
C = 500 mm
FT30021
A = 710 mm
Triangle-Truss FT30
Corner 90° + Down Right
B = 500 mm
FT30-014
Corner 90° + Down Left
B = 500 mm
C = 500 mm
FT30014
Right
A = 500 mm
Corner 90° + Up/Down
B = 500 mm
C = 742 mm
FT30-018
T-Cross Horizontal 3-Way
B = 500 mm
FT30018
Apex Down
A = 710 mm
FT30-021
T Cross + Down 4-Way
FT30010
Apex Up
A = 500 mm
FT30-017
Cross 4-Way
Corner 120°
A = 500 mm
FT30-013
FT30-020
T-Cross Vertical 3-Way
FT30007
A = 500 mm
FT30-016
FT30-019
Apex Up
FT30012
Apex Down
FT30004
FT30-007
FT30-012
Corner 90° + Down Left
FT30-004
Corner 90°
A = 500 mm
FT30-006
A = 500 mm
Apex Up
FT30003
A = 800 mm
FT30-005 FT30005
FT30-003
Corner 60°
T-Cross Vertical 3-Way
B = 500 mm
FT30-022
T Cross Up/Down 5-Way
B = 500 mm
C = 742 mm
FT30022
A = 710 mm
Cross Up/Down 6-Way
B = 710 mm
C = 742 mm
[Truss-systems] 08.03.11 17:57
Triangle-Truss FT30 Tru russ sss-sys -ssyysstteemss Triangle-Truss FT30 FT30-023
FT30-024
T-Cross Up/Down 3-Way
FT30023
A = 742 mm
FT30-025
FT30024
Apex Down
B = 500 mm
Cross and Down 5-Way
A = 710 mm
B = 710 mm
FT30025
Apex Up
C = 500 mm
A = 710 mm
FT30-029
Cross and Down 5-Way
B = 710 mm
C = 500 mm
Length
FT30-BP FT30BP
FT30-WM
Base plate for FT30
FT30029
Baseplate for FT30
Wall Mount Plate for FT30
FT30WM
FT30050
FT30BP2
FT30071 FT30100 FT30150 FT30200 FT30250 FT30300
Conical Spigot FACSM
Conical pin
8 cm, For Pro-30 Truss
FACPM
FT30400
Conical Pin with Thread M6
For Pro-30 Truss
FACPM6
FT30500
M6 Thread for Pro-30 Truss
Straight 290 mm Straight 500 mm Straight 710 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm Straight 5000 mm
Spacer for FT30
Conical Pin with Thread M8 FACPM8
Safety R Spring
M8 Thread for Pro-30 Truss
FASS
Half-conical Connector
For Pro-30 Truss
M12 Thread
FACS12
Length
FASP20 FASP40
20 mm 40 mm
Specifications Triangle FT30 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Point load in
kg
lbs
294.9
650.1
264.8
583.8
239.3
527.6
214.6
473.1
194.2
428.1
177.1
390.4
162.5
358.3
149.8
330.3
138.8
303.1
129.0
284.4
Deflection in
mm
inch
4.50
0.18
7.65
0.30
12.15
0.48
18.48
0.73
26.43
1.04
36.03
1.42
47.31
1.86
60.33
2.38
75.09
2.96
91.64
3.61
Distributed load in kg
lbs
212.6
468.7
153.7
338.9
120.1
264.8
84.4
186.1
62.3
137.4
47.7
105.2
37.5
82.7
30.4
67.0
25.0
55.1
15.4
34.2
Deflection in
inch
5.28
0.21
10.24
0.40
18.11
0.71
26.41
1.04
36.25
1.34
47.61
1.88
60.50
2.38
74.91
2.95
90.84
3.57
101.2
3.98
mm
Triangle figures are based on use in position apex down
Triangle-Truss FT30 02_17_18_Truss+merchand_10_temp2011.indd 609
[Truss-systems]
609 08.03.11 17:57
Triangle-Truss GT30 Trruuss ss-s -ssysste -sys tems ms Triangle-Truss GT30 GT30-001 GT30001
Connectors
GT30-002
Corner 45 Degrees Incl.
A = 1000 mm
GT30-005 GT30005
Connectors
Corner 135 Degrees Incl.
GT30002
Connectors
GT30-003
Corner 60 Degrees Incl.
GT30003
Connectors
GT30-004
Corner 90 Degrees Incl.
GT30004
Connectors
Corner 120 Degrees Incl.
A = 800 mm
A = 500 mm
A = 500 mm
GT30-006
GT30-007
GT30-010
Corner 90 Degrees Apex Up Incl. Connectors
Corner 90 Degrees Apex Down Incl. Connectors
GT30010 Corner 90 Degrees + Down Right Apex Up Incl. Connectors
GT30006
A = 500 mm
A = 500 mm
GT30-011
GT30-012
GT30-013
GT30-014
Corner 90 Degrees + Down Left Apex Up Incl. Connectors
Corner 90 Degrees + Down Right Apex Down Incl. Connectors
Corner 90 Degrees + Down Left Apex Down Incl. Connectors
GT30014 Corner 90 Degrees + Up/ Down Right Incl. Connectors
GT30011
A = 500 mm
B = 500 mm
C = 500 mm
A = 500 mm
GT30-016
GT30015 Corner 90 Degrees + Up/ Down Left Incl. Connectors
nectors
B = 500 mm
C = 742 mm
A = 500 mm
GT30012
GT30-015
A = 500 mm
B = 500 mm
GT30007
GT30016
A = 710 mm
B = 500 mm
C = 500 mm
Cross 4-Way Incl. Con-
B = 710 mm
B = 500 mm
A = 500 mm
GT30013
A = 500 mm
B = 500 mm
C = 500 mm
A = 500 mm
B = 500 mm
B = 500 mm
C = 724 mm
GT30-017
GT30-018
GT30017 T-Cross Horizontal 3-Way Incl. Connectors
GT30018 T-Cross Vertical 3-Way Apex Down Incl. Connectors
A = 710 mm
B = 500 mm
A = 710 mm
B = 500 mm
GT30-019
GT30-020
GT30-021
GT30-022
T-Cross Vertical 3-Way Apex Up Incl. Connectors
T-Cross + Down 4-Way Incl. Connectors
T-Cross Up and Down 5-Way Incl. Connectors
GT30022 Cross Up and Down 6-Way Incl. Connectors
GT30019
A = 710 mm
B = 500 mm
610 02_17_18_Truss+merchand_10_temp2011.indd 610
GT30020
A = 710 mm
B = 500 mm
C = 500 mm
GT30021
A = 710 mm
Triangle-Truss GT30
B = 500 mm
C = 742 mm
A = 710 mm
B = 710 mm
C = 742 mm
[Truss-systems] 08.03.11 17:58
Triangle-Truss GT30 Tru russ sss-sys -ssyysstteemss Triangle-Truss GT30 GT30-023
GT30-024
GT30-025
T-Cross Up/Down 3-Way Incl. Connectors
Cross and Down 5-Way Apex Down Incl. Connectors
Cross and Down 5-Way Apex Up Incl. Connectors
GT30023
A = 742 mm
GT30024
B = 500 mm
A = 710 mm
GT30-BP
B = 710 mm
C = 500 mm
GT30-WM
Base plate for GT30
GT30BP
GT30-029
GT30025
A = 710 mm
B = 710 mm
C = 500 mm
Length
Conical Spigot
Wall mount for GT30
GT30WM
GT30029
For Pro-30 Truss
GACSM
GT30050 GT30071 GT30100 GT30150 GT30200 GT30250 GT30300 GT30400 GT30500
Safety R Spring GASS
Conical Pin
For Pro-30 Truss
GACPM
Straight 290 mm Straight 500 mm Straight 710 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm Straight 5000 mm
Half Conical Connector
For Pro-30 Truss
M12 Thread. For Pro-30 Truss
GACS12
Specifications Triangle GT30 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Point load in
kg
lbs
294.9
650.1
264.8
583.8
239.3
527.6
214.6
473.1
194.2
428.1
177.1
390.4
162.5
358.3
149.8
330.3
138.8
303.1
129.0
284.4
Deflection in
mm
inch
4.50
0.18
7.65
0.30
12.15
0.48
18.48
0.73
26.43
1.04
36.03
1.42
47.31
1.86
60.33
2.38
75.09
2.96
91.64
3.61
Distributed load in kg
lbs
212.6
468.7
153.7
338.9
120.1
264.8
84.4
186.1
62.3
137.4
47.7
105.2
37.5
82.7
30.4
67.0
25.0
55.1
15.4
34.2
Deflection in
inch
5.28
0.21
10.24
0.40
18.11
0.71
26.41
1.04
36.25
1.34
47.61
1.88
60.50
2.38
74.91
2.95
90.84
3.57
101.2
3.98
mm
Triangle figures are based on use in position apex down
Triangle-Truss GT30 02_17_18_Truss+merchand_10_temp2011.indd 611
[Truss-systems]
611 08.03.11 17:58
Square-Truss DQ22 Trruuss ss-s -ssysste -sys tems ms Square-Truss DQ22 DQ22-001 DQ22001
DQ22-002
Q-001 45 Degrees
DQ22002
DQ22-005
DQ22012
3-way
A = 400 mm
DQ22-017
DQ22-020
Q-017 90° T-cross 3-way
DQ22020
4-way
Q-003 Corner 90°
DQ22004
A = 400 mm
DQ22-012
Q-004 Corner 135°
A = 400 mm
DQ22017
Q-002 60 Degrees
DQ22-004
DQ22003
A = 600 mm
A = 800 mm
DQ22005
DQ22-003
A = 400 mm
DQ22-016
Q-012 Corner 90° + down
B = 400 mm
C = 400 mm
DQ22-050
DQ22016
Q-016 Q-cross
A = 580 mm
B = 580 mm
Length
DQ22-024
Q-020 T-Cross + Down
DQ22050
Q-024 Cross + Down
DQ22024
5-way
DQ22100 DQ22150 DQ22200 DQ22250 DQ22300 DQ22400
A = 580 mm
A = 580 mm
B = 400 mm
DQ22-BP DQ22BP
B = 400 mm
DQ22WM
Decotruss Conical Pin
B = 580 mm
Wall Mount Plate for DQ22
Straight 500 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm
C = 400 mm
Decotruss Conical Spigot
DQ22-WM
Base Plate for DQ22
A = 580 mm
C = 400 mm
Q-004 Corner 120°
Decotruss Safety Spring
DA22CS
DA22SS
Conical Pin with thread
DA22CP
DA22CPM6
DQ22KIT DQ22KIT
4 x DA22CS, 8 x DA22CP, 8 x DA22SS
Specifications Square truss DQ22 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
Point load in
kg
lbs
222.0
489.4
196.5
433.2
176.2
388.5
159.3
351.2
143.1
315.5
129.6
285.7
118.2
260.6
108.3
238.8
99.6
219.6
87.8
193.6
Deflection in
mm
inch
4.63
0.18
8.46
0.33
13.88
0.55
20.92
0.82
29.02
1.14
38.41
1.51
51.49
2.03
63.14
2.49
77.16
3.04
82.0
3.23
74.1
27.5
60.6
22.8
50.3
Distributed load in kg
lbs••
156.9
345.9
114.6
252.7
90.1
198.6
74.1
163.4
62.1
136.9
53.3
117.5
41.9
92.4
33.6
Deflection in
inch
5.59
0.22
11.74
0.46
21.52
0.85
35.84
1.41
54.88
2.16
79.58
3.13
99.53
3.92
121.32 4.78
mm
149.10 5.87
177.62 6.99
•• per meter / 3.28 ft loading tests performed by Ing. Josef Henrych DrSc.
612 02_17_18_Truss+merchand_10_temp2011.indd 612
Square-Truss DQ22
[Truss-systems] 08.03.11 17:58
Square-Truss PQ30 Tru russ sss-sys -ssyysstteemss Square-Truss PQ30 PQ30-001
PQ30-002
Q-001 45°
PQ30001
Q-002 60°
PQ30003
A = 800 mm
A = 1000 mm
PQ30-005 PQ30005
PQ30-003
PQ30002
B = 500 mm
C = 500 mm
A = 710 mm
B = 710 mm
PQ30-020
PQ30-024
PQ30020
PQ30024
Q-020 90° T-cross + down 4-way
PQ30-029
Q-016 Q-Cross
PQ30-017
Length
PQ30029 PQ30050
Q-024 90° Cross + down 5-way
PQ30071 PQ30100 PQ30150 PQ30200 PQ30250 PQ30300 PQ30400
A = 710 mm
A = 710 mm
B = 500 mm
PQ30-BP PQ30BP
C = 500 mm
PQ30-WM
Base plate for PQ30
For Pro-30 Truss
B = 710 mm
PQ30500
C = 500 mm
Conical Pin with Thread M6
Spacer for PQ30
LENGTH
LENGTH
PACPM8 M8 Thread for Pro-30 Truss
PASP30 30 mm
PACPM6 M6 Thread for Pro-30 Truss
Half Conical Connector PACS12
A = 710 mm
Straight 290 mm Straight 500 mm Straight 710 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm Straight 5000 mm
Wall Mount Plate for PQ30
PQ30WM
Conical Spigot PACSM
B = 500 mm
Q-004 120°
A = 500 mm
PQ30016
A = 500 mm
Q-017 90° T-cross 3-way
PQ30004
PQ30-016
Q-012 90° + down 3-way
PQ30012
A = 500 mm
PQ30017
Q-003 90°
A = 500 mm
PQ30-012
Q-005 135°
PQ30-004
M12 Thread. For Pro-30 Truss
PASP20 20 mm PASP39 39 mm PASP50 50 mm
Conical Pin
Safety R Spring
PACPM
PASS
Specifications Square truss PQ30 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
Point load in Deflection in
kg
lbs
632.2
1394
567.6
1251
512.9
1131
460.0
1014
416.3
917.8
379.7
837.1
348.3
767.9
321.2
mm
inch
4.82
0.19
8.20
0.32
13.02
0.51
19.81
0.78
28.33
1.11
38.62
1.52
50.71
2.00
64.66
Distributed load in kg
lbs••
455.8
1005
329.4
726.2
257.5
567.7
180.9
398.8
133.6
294.5
102.3
225.5
80.7
177.9
65.1
Deflection in
inch
5.66
0.22
10.98
0.43
19.41
0.77
28.31
1.11
38.75
1.52
51.03
2.00
64.84
2.55
80.29
mm
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
708.1
297.5
655.9
276.5
609.6
2.55
80.48
3.17
98.22
3.87
143.5
53.5
11.9
44.6
98.3
3.16
97.36
3.83
116.1
4.57
•• per meter / 3.28 ft loading tests performed by Ing. Josef Henrych DrSc.
Square-Truss PQ30 02_17_18_Truss+merchand_10_temp2011.indd 613
[Truss-systems]
613 08.03.11 17:59
Square-Truss FQ30 Trruuss ss-s -ssysste -sys tems ms Square-Truss FQ30 FQ30-001 FQ30001
FQ30-002
Corner 45°
A = 1000 mm
Corner 60°
FQ30003
A = 800 mm
FQ30-005 FQ30005
FQ30002
FQ30-003
FQ30012
A = 500 mm
A = 500 mm
FQ30-017
FQ30-020
Corner 90°
A = 500 mm
FQ30-029
FQ30-016
Corner 3-way 90°
B = 500 mm
FQ30016
C = 500 mm
Corner 120°
FQ30004
A = 500 mm
FQ30-012
Corner 135°
FQ30-004
Cross 4-way
A = 710 mm
B = 710 mm
Length
FQ30017
T-Cross 3-way
FQ30020
T-Cross + Down 4-way
FQ30-024
FQ30029
FQ30024
FQ30050
Cross + Down 5-way
FQ30071 FQ30100 FQ30150 FQ30200 FQ30250 FQ30300 FQ30400
A = 710 mm
B = 500 mm
FQ30-BP FQ30BP
A = 710 mm
B = 500 mm
C = 500 mm
FQ30-WM
Base plate for FQ30
FQ30WM
A = 710 mm
B = 710 mm
C = 500 mm
Baseplate for FQ30
Wall Mount Plate for FQ30
FQ30500
Straight 290 mm Straight 500 mm Straight 710 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm Straight 5000 mm
Conical pin
FQ30BP2
LENGTH
FACPM
For Pro-30 Truss
FACPM8 M8 Thread for Pro-30 Truss
Conical Spigot FACSM
For Pro-30 Truss, 88,04 mm
Safety R Spring FASS
Spacer for FQ30
For Pro-30 Truss
Half-conical Connector FACS12
M12 Thread
LENGTH
FASP20 20 mm FASP40 40 mm
614 02_17_18_Truss+merchand_10_temp2011.indd 614
Square-Truss FQ30
[Truss-systems] 08.03.11 17:59
Square-Truss GQ30 Tru russ sss-sys -ssyysstteemss Square-Truss GQ30 GQ30-001
GQ30-002
GQ30001
Connectors
Corner 45 Degrees Incl.
GQ30-003
Corner 60 Degrees Incl.
GQ30002
Connectors
A = 1000 mm
GQ30003
Connectors
A = 800 mm
GQ30-005 GQ30005
Connectors
Corner 135 Degrees Incl.
Corner 90 Degrees Incl.
GQ30004
Connectors
A = 500 mm
GQ30-012
GQ30-016
GQ30012 3-Way Corner 90 Degrees Incl. Connectors
nectors
A = 500 mm
GQ30-004
A = 500 mm
B = 500 mm
C = 500 mm
Corner 120 Degrees Incl.
A = 500 mm
GQ30-029
Cross 4-Way Incl. Con-
GQ30016
A = 710 mm
B = 710 mm
Length
GQ30-017
GQ30-020
GQ30-024
T-Cross + Down 4-Way Incl. Connectors
GQ30017
GQ30020
T-Cross 3-Way Incl. Connectors
GQ30029
GQ30024
Connectors
GQ30050
Cross + Down 5-Way Incl.
GQ30071 GQ30100 GQ30150 GQ30200 GQ30250 GQ30300 GQ30400
A = 710 mm
B = 500 mm
A = 710 mm
GQ30-BP
C = 500 mm
GQ30-WM
GQ30BP
Base plate for GQ30
Wall mount for GQ30
GACSM
Conical Pin
For Pro-30 Truss
GACPM
A = 710 mm
B = 710 mm
GQ30500
C = 500 mm
Conical Spigot
GQ30WM
Safety R Spring GASS
B = 500 mm
Straight 290 mm Straight 500 mm Straight 710 mm Straight 1000 mm Straight 1500 mm Straight 2000 mm Straight 2500 mm Straight 3000 mm Straight 4000 mm Straight 5000 mm
For Pro-30 Truss
Half Conical Connector
For Pro-30 Truss
GACS12
M12 Thread. For Pro-30 Truss
Specifications Square truss FQ30/PQ30/GQ30 Span in
m
ft
3.00
9.84
4.00
13.12
5.00
16.40
Point load in Deflection in
kg
lbs
632.2
1394
567.6
1251
512.9
1131
460.0
1014
416.3
917.8
379.7
837.1
348.3
767.9
321.2
mm
inch
4.82
0.19
8.20
0.32
13.02
0.51
19.81
0.78
28.33
1.11
38.62
1.52
50.71
2.00
64.66
Distributed load in kg
lbs••
455.8
1005
329.4
726.2
257.5
567.7
180.9
398.8
133.6
294.5
102.3
225.5
80.7
177.9
65.1
Deflection in
inch
5.66
0.22
10.98
0.43
19.41
0.77
28.31
1.11
38.75
1.52
51.03
2.00
64.84
2.55
80.29
mm
6.00
19.68
7.00
22.96
8.00
26.24
9.00
29.52
10.00
32.80
11.00
36.08
12.00
39.36
708.1
297.5
655.9
276.5
609.6
2.55
80.48
3.17
98.22
3.87
143.5
53.5
11.9
44.6
98.3
3.16
97.36
3.83
116.1
4.57
•• per meter / 3.28 ft loading tests performed by Ing. Josef Henrych DrSc.
Square-Truss GQ30 02_17_18_Truss+merchand_10_temp2011.indd 615
[Truss-systems]
615 08.03.11 18:00
Circles & Ellipses Trruuss ss-s -ssysste -sys tems ms Circles & Ellipses Available in standard Apex down setup, the Triangle truss circles can give shape to your ideas and form your project. On request, each circle is also available in Apex in or Apex out, thus creating the possibility of virtually any shape or size. There is no straight line in nature….
GT30 Triangle Truss Circle GT30C2
Diameter 2 m
GT30C4
Diameter 4 m
GT30C6
Diameter 6 m
GT30C8
Diameter 8 m
PT30 Triangle Truss Circle PT30C2
Diameter 2 m
PT30C4
Diameter 4 m
PT30C6
Diameter 6 m
PT30C8
Diameter 8 m
FT30 Triangle Truss Circle FT30C2
Diameter 2 m
FT30C4
Diameter 4 m
FT30C6
Diameter 6 m
FT30C8
Diameter 8 m
Make your truss-construction come alive by introducing circles into your design. Spice things up a bit with one of our truss-circles and create a new light design or stand just by adding some curved segments. The circles in the GQ, PQ and FQ-Series are available in 2mtr, 4mtr, 6mtr and 8mtr version but don’t hesitate to ask for other diameters. Your own imagination is the limit and we can help you explore it……
GQ30 Square Truss Circle GQ30C2
Diameter 2 m
GQ30C4
Diameter 4 m
GQ30C6
Diameter 6 m
GQ30C8
Diameter 8 m
PQ30 Square Truss Circle PQ30C2
Diameter 2 m
PQ30C4
Diameter 4 m
PQ30C6
Diameter 6 m
PQ30C8
Diameter 8 m
FQ30 Square Truss Circle
616 02_17_18_Truss+merchand_10_temp2011.indd 616
FQ30C2
Diameter 2 m
FQ30C4
Diameter 4 m
FQ30C6
Diameter 6 m
FQ30C8
Diameter 8 m
Circles & Ellipses
[Truss-systems] 08.03.11 18:00
Foldable-Truss FT50 Tru russ sss-sys -ssyysstteemss Foldable-Truss FT50 Corner 90 degrees
T-Cross 3-Way
For foldable triangle truss
FT50003
FT50017
Foldable Triangle Truss Straight
Cross 4-Way
For foldable triangle truss
FT50016
For foldable triangle truss
Length
Conical Pin PA50CP
Half Conical Connector
For FT/FQ50 series
PA50CS16
1,2 m 1,6 m FT50240 2,4 m FT50120
Conical Spigot
M16 Thread
PA50CS
FT50160
For FT/FQ50 series 10,5 cm
Safety Spring PA50SS
For FT/FQ50 series
Specifications Truss FT50 system Span in
m
ft
7.0
Point load in
kg
lbs
1950 4299 1530 3373 1480 3263 1350 2976 1215 2679 1180 2601 1082 2385 948
Distributed load in kg Deflection in
lbs•• 445
mm inch
28.0
23.0
8.0
26.2
9.0
29.5
10.0
32.8
11.0
36.1
12.0
39.4
13.0
42.7
14.0
45.9
15.0
49.2
16.0
52.5
17.0
55.8
18.0
59.1
19.0
62.3
20.0
65.6
2090 883
1947 832
1834 785
1731 741
1634 692
1526 650
1433
299
389
261
328
220
268
180
223
150
188
126
159
107
137
92.1
121
81.3
108
72.6
94.2
63.3
83.9
56.4
73.7
49.5
63.5
42.7
1.10
34.0
1.34
44.0
1.73
52.0
2.05
58.0
2.28
63.0
2.48
79.0
3.11
105
4.13
113
4.45
122
4.80
138
5.43
161
6.34
173
6.81
180
7.09
•• per meter / 3.28 ft Project: Eurovision Junior Songfestival -Ahoy Rotterdam (NL) Client: AVRO Technical coördination: Sightline Productions Lights: Flashlight Rental-Utrecht (NL) Lightdesign: Henk-Jan Van Beek - Light-H-Art (NL)
Foldable-Truss FT50 02_17_18_Truss+merchand_10_temp2011.indd 617
[Truss-systems]
617 08.03.11 18:00
Square-Truss FQ50 Trruuss ss-s -ssysste -sys tems ms Square-Truss FQ50 Straight Square Truss
Conical Spigot
For FT/FQ50 series 10,5 cm
PA50CS
Conical Pin
Safety Spring PA50SS
For FT/FQ50 series
PA50CP
For FT/FQ50 series
Length
1000 mm 2000 mm FQ50250 2500 mm FQ50300 3000 mm FQ50400 4000 mm FQ50100
Multicube
Half Conical Connector
FQ50200
PA50CS16
M16 Thread
FQ50MC
Female Receiver for Multicube FQ50
For FQ series
FQ50MCFC
Female
Specifications Truss FQ50 system Span in
m
ft
7.0
Point load in
kg
lbs
2200 4850 1911 4213 1735 3825 1590 3505 1343 2961 1290 2844 1201 2648 1112 2452 1020 2249 980
Distributed load in kg Deflection in
lbs•• 616
mm inch
22.0
23.0
8.0
26.2
9.0
29.5
10.0
32.8
11.0
36.1
12.0
39.4
13.0
42.7
14.0
45.9
15.0
49.2
16.00 52.5
17.0
2161 912
55.8
18.0
2011 850
59.1
19.0
1874 820
62.3
20.0
65.6
1808 800
1764
484
474
318
369
248
309
208
243
163
210
141
181
122
156
105
133
894
108
80.6
105
70.6
94.7
63.6
84.2
56.6
74.0
49.7
0.87
35.0
1.38
41.0
1.61
55.0
2.17
67.0
2.64
79.0
3.11
90.0
3.54
109
4.29
122
4.80
140
55.1
165
6.50
177
6.97
188
7.40
210
8.27
•• per meter / 3.28 ft
Truss Accessories Spacer PL compatible
Conical Adapter Spigot PACSPF
for PT/FT Truss
Conical Adapter Spigot PACSGF
for G/F Truss
Conical Adapter Spigot PACSGP
for G/P Truss
Length
PAFSP105 105 mm PAFSP121
121,5 mm
Endcap for conical receiver PAFEC
618 02_17_18_Truss+merchand_10_temp2011.indd 618
Hinge PAFH
TV-spigot 29 mm PS compatible
Truss Accessories
PASP14
29 mm
[Truss-systems] 08.03.11 18:01
Truss Accessories Tru russ sss-sys -ssyysstteemss Trusscarrier 73050
for 30-Truss FQ/FT/GQ/GT/PQ/PT, white
A quick and easy way to handle and store your Trio or Quatro 30-truss system without damaging or scratching each length. Stacking truss has always been a bit of a challenge but the Truss carrier can take care of this for you, literally. Now, you can store our well-know FT, GT, PT, FQ, PQ and GQ truss without problem and without damage. The Truss carrier is produced out of Rigidex HD521EA High Density Poly Ethylene and weighs 450gr per unit, it is suited to be handled in surroundings with a temp-range of -40 °C to +120 °C without disforming, thus guaranteeing a problem-free handling in any situation, indoor or outdoor. Technical Information Material: Rigidex HD5218EA Hish Density Poly Ethylene Color: White Weight: 425 grammes per unit Measurements: 600 x 40 x 55mm
Thick: Outer carton: Suited for:
7mm 60pcs Lengths of FT, GT, PT, FQ, GQ, PQ truss
Multicube
Multicube Receiver
Available models:
Available models:
Multicube incl. 4 female connectors FQ30MC Multicube incl. 4 female connectorss GQ30MC Multicube incl. 4 female connectorss
PQ30 Female Multicube Receiver FQ30 Female Multicube Receiver GQ30MCFC GQ30 Female Multicube Receiver
PQ30MC
PQ30MCFC FQ30MCFC
The Multi Cube Corner is a flexible and strong corner. Due to its design it is stronger than standard corners and therefor it can take the full load in span where the load for a normal corner is only 50%. Thanks to this advantage it is a cost effective investment and the modular construction makes its applications numerous. The Multi Cube Corner is standard equipped with 4 female connectors. More female receivers are available as accessory.
Bookcorner Available models:
PQ30BC FQ30BC GQ30BC FT30BC PT30BC GT30BC FT50BC
PQ30 Bookcorner FQ30 Bookcorner GQ30 Bookcorner FT30 Bookcorner PT30 Bookcorner GT30 Bookcorner FT50 Bookcorner
Bookcorners provide system users with increased flexibility enabling infinite angular adjustment between 1° -180°. The corners are designed to either female receivers or male half connectors bolted through the aluminium hinge frame. Note: Bookcorners are not structural components and must be supported on both sides of the frame to ensure safe operation. The Alu Lite Bookcorner gives you the option to make any angle from 1° to 180 ° with just one corner. The corner is available in two versions. One for triangle (PT30) truss and one for square (PQ30) truss. Just note that the hinges never should be a part of the structural component; they must have support on each side of the hinge!
Truss-tool 73000
Truss-spanner, hammer an leather pouch
Large truss-constructions are more and more common during large events or entertainmentvenues. This automatically means a lot of handling during construction, use of the spigots, the noise-pollution and wear and tear of the used materials and equipment. And more and more especially the problem of noise pollution is a large issue during construction. Truss-tool makes sure that the noise-issue during construction will be limited to an absolute minimum and using the truss-hammer while putting the separate parts together makes sure that misfits won’t occur anymore. The sturdy leather pouch makes sure that you can enjoy your equipment for a long time. Technical information: • Lifetime guarantee • Suited for trussing from 25-65 mm diameter • Minimises damage to truss and spigots • Cost-effective tool • Set includes truss-spanner, hammer and leather pouch • Less noise pollution for your staff or your surroundings
Truss Accessories 02_17_18_Truss+merchand_10_temp2011.indd 619
[Truss-systems]
619 08.03.11 18:01
Truss Furniture Trruuss ss-s -ssysste -sys tems ms
Truss stool trio
Sturdy bar stool made of trio-truss 72501
Truss table trio
Sturdy bar table made out of trio-truss 72500
Truss stool Trio twisted 72504
Truss table Trio twisted 72505
Technical information:
Technical information:
Technical information:
Technical information:
Triangle truss: Height: Seat:
Triangle truss: Height: Desk top: Ground plating: Weight:
Twisted triangle truss with 50 mm tube Height: 830 mm Seat diameter: 300 mm and 30 mm thickness Ground plate: 780 mm Dimensions: 475 x 475 x 850 mm
Twisted triangle truss with 50 mm tube Height: 1100 mm Desktop: 700 mm diameter Ground plate: 780 mm Weight: 10,6 kg
Ground plating:
32 mm tube 830 mm 300 mm diameter, 30 mm thickness 780 mm
50 mm tube 1100 mm 700 mm diameter 780 mm 10,6 kg
Truss Furniture Truss furniture, easy to use and easy to the eye. The combination is made of aluminium construction, therefore it is lightweight and perfect for your venues. Using Truss furniture will surely upgrade your event by giving it a contemporary look and by adding an extra eye-catcher to your enterprise. Have you already thought about the possibility of using Truss furniture for your exhibition stand or in your own showroom?
620 02_17_18_Truss+merchand_10_temp2011.indd 620
Truss Furniture
[Truss-systems] 08.03.11 18:01
Truss Furniture Tru russ sss-sys -ssyysstteemss
Truss stool quatro 72502
Sturdy bar stool made of quatro truss
Truss table quatro 72503
Sturdy bar table made out of quatro-truss
Technical information:
Technical information:
Quatro-truss: Height: Seat:
Quatro truss: Height: Desktop: Tabletop: Weight:
Ground plating: Weight:
50 mm tube 840 mm 300 mm diameter, 30 mm thickness 780 mm 6 kg
Truss Furniture 02_17_18_Truss+merchand_10_temp2011.indd 621
50 mm tube 1100 mm 530 mm 700 mm 18,5 kg
[Truss-systems]
621 08.03.11 18:01
PIT Truss Trruuss ss-s -ssysste -sys tems ms Truss Powerrail Installation Truss with integrated 3-Phase Powerrail. No timerobbing wiring in the truss. The integrated 3-Phase Powerrail has an aluminium Profile for grounding and 4 embedded 2,5mm copperrails. It’s possible to select the phase by turnswitch. Ideal for decoration and stands. IT-Truss compatible. Available models:
PIT30020 PIT30040 PIT30060 PIT30080 PIT30100 PIT30200 PIT30250 PIT30300 PIT30400 PIT30500
20 cm 40 cm 60 cm 80 cm 100 cm 200 cm 250 cm 300 cm 400 cm 500 cm
PIT Truss Mechanical Mounting Adapter PITMU
Truss Powerrail Accessories
Multi Power Adapter Schuko PITADS
Truss Powerrail Accessories
Endcap with Power Input Left PITESL
Truss Powerrail Accessories
622 02_17_18_Truss+merchand_10_temp2011.indd 622
Mechanical Hanging Adapter PITUH
Cover for Mechanical Hanging Adapter
Truss Powerrail Accessories
Endcap for Powerrail PITEC
PITUC
Truss Powerrail Accessories
3 Phase Power Input
Truss Powerrail Accessories
PITME
Truss Powerrail Accessories
Multi Power Adapter Terminal PITAD
Truss Powerrail Accessories
Connector PITEL
Truss Powerrail Accessories
Endcap with Power Input Right PITESR
Truss Powerrail Accessories
PIT Truss
[Truss-systems] 08.03.11 18:01
Showtec Fan Gear Sho howt owt wteecc Merrchhan anddiisee Showtec Fan Gear Now you can order your own road-proof shirts for any occasion! If you’re a roady or just a party-animal, this T-Shirt is a “must-have”! The Showtec shirts are available in 2 unique and good-looking designs. (Available in the sizes; M, L, XL & XXL)
Frontside shown! Backside shown! Backside shown!
DAP/Showtec t-shirt
Showtec T-Shirt Partycrew
Available models:
99020 99021 99022 99023
Available models:
Size M Size L Size XL Size XXL
99000 99001 99002 99003
Size M Size L Size XL Size XXL
Showtec T-Shirt LightJockey Available models:
99005 99006 99007 99008
Size M Size L Size XL Size XXL
Showtecc Cap 99100
Showtec Sweater
Backside shown!
Available models:
99040 99041 99042 99043
Size M Size L Size XL Size XXL
Backside shown!
Security-jacket 99050
Showtec Fan Gear 02_17_18_Truss+merchand_10_temp2011.indd 623
“Security”, Yellow
[Showtec Merchandise]
Backside shown!
Security-jacket 99051
“Crew”, Orange
623 08.03.11 18:02
IP Ratings / Icon Index IIPP Rattin ings gss / Ico con Inndeex Icon Index
IP Ratings (Ingress Protection)
Weight in Kg.
Filterframe (not) included
Dimensions in mm.
Optional Flightcase
1st Digit
Protection from solid objects
2nd Digit
Protection from moisture
0
Non protected
0
Non protected
Protected against solid objects greater than 50mm
1
Protected against dripping water
Number of channels
Output p.min.
1
Rotation p. min.
Optional Remote Control
2
Protected against solid objects greater than 12mm
2
Protected against dripping water when tilted up to 15°
Musicontrolled
Wattage
3
Protected against solid objects greater than 2.5mm
3
Protected against spraying water
19 “ Rackmountable
Number of Led’s 4
Protected against solid objects greater than 1.0mm
4
Protected against splashing water
5
Dust protected
5
Protected against water jets
6
Dust tight
6
Protected against heavy seas
7
Protected against the effects of immersion
8
Protected against submersion
Speakerdimensions
Tank Capacity
Lamp (not) included
Screen size
Ohm
624
IP54 = IP Letter Code ----- IP 1st Digit -------------- 5 2nd Digit --------------- 4
Voltage: 220-240V
IP-Rating
Transformer
Barndoor (not) included
Voltage: 12V
IP Ratings / Icon Index
02_17_18_Truss+merchand_10_temp2011.indd 624
Note: EN 60529 does not specify sealing effectiveness against the following: mechanical damage of the equipment; the risk of explosions; certain types of moisture conditions, e.g. those that are produced by condensation; corrosive vapours; fungus; vermin
[IP Ratings / Icon Index] 08.03.11 18:02
This is a Highlite International B.V. publication. Design, concept, artwork, text and pictures* are copyright protected and may not be reproduced in any form without prior approval of Highlite International B.V. in the Netherlands. Information in this catalogue is subject to change. Highlite International B.V. has the right to refuse claims based on misprints or editorial-errors. (*with exception where otherwise stated) Concept, art & design: Graphic design dep. Highlite International B.V. All rights reserved 2011 Š
Cover 2011 Highlite-NO NAME.indd 2
10-03-2011 11:34:07
The future of showtechnology starts here...
Vestastraat 2, 6468 EX Kerkrade, The Netherlands. +31 - (0)45 - 5667701 +31 - (0)45 - 5667709 sales@highlite.nl +31 - (0)45 - 5667706 +31 - (0)45 - 5667709 export@highlite.nl www.highlite.nl
Catalogue and cover concept, art & design: Graphic design department Highlite International B.V. All rights reserved 2011 Š
2011 - 2012
Phone Sales: Fax Sales: Email: Phone Export: Fax Export: Email: WorldWideWeb:
Productcatalogue
Highlite International B.V.