8
7
6
5
4
3
COAT RACK 600 ...
PRODUCT DETAILS, TECHNICAL DETAILS AND FITTING INSTRUCTIONS
R5 16
40
m
m
50 mm
263 mm
300 mm
255 mm
Ø10 mm
25,5
30
4,5
2
8
R5
16
600 mm 516 mm
150 mm
5
500 mm
250 mm 500 mm
8
7
6
5 frostdenmark.com
4
3
COAT RACK 600 with bar and 4 hooks Aluminium / Stainless Steel Height: 150 mm Width: 600 mm Projection: 300 mm Shelf Thickness: 4 mm
Matt Black / Polished Stainless U4003-B
Matt Black / Polished Copper U4003-CB
Matt Black / Polished Gold U4003-GB
Matt White / Polished Stainless U4003-W
Matt White / Polished Copper U4003-CW
Matt White / Polished Gold U4003-GW
CLEANING AND MAINTENANCE Surfaces should be cleaned with a microfiber cloth, glass cleaner or other non abrasive and gentle agents. Aention: Never use solvents or aggressive household cleaners like bleach, acids (e.g. descalers) or ammonia-based bathroom cleaner to clean the product. Steel wool and hard brushes can permanently damage the surface of the steel. EXCLUSION OF LIABILITY FROST accepts no liability whatsoever for damage to persons or property that occurs or has occurred as a result of improper installation or maintenance, particularly if the safety instructions and other points to note listed are not or have not been observed in full. WARNING AND HAZARD NOTICES Improper mounting or use can lead to accidents and serious injuries.
2
WWW.FROSTDENMARK.COM
Matt Black / Polished Black U4003-BB
B
A
A
28
0m STEP 1: Fix the mounting bare Aon the wall as m C D illustrated. Use the two wall plugs and screws.
IN THE BOX B
60
B
IN THE BOX
IN THE BOX A
D
mm
STEP 2: Slide the Coat mounting bare A. 60 m
m
B
B STEPA2: Slide the Coat Rack onto the STEP 1: Fix the mounting bare Aon the wall as STEP 1: Fix the mounting on the wall as illustrated. Use the AD C G bare C E plugs and F screws. D mounting bare A. illustrated. Use the two wall
B
4x
IN THE BOX
60 m Ø5x40m
BC
D
4x
4x
Ø8x38
Ø5x40
C
wall 2x plugs and
D 2x
280 screws. m m
A
B
B
A D the mounting bare STEP Ø4x39 1: FixHOOK
60 m
Ø4x39
Ø6x30 60
Ø6x30
60 m
D
mm
280
m
HOOK
A
mm
B STEP 2: Slide the Coat Rack onto the STEP 3: Mark the placement of the two screw holes unting bare Aon the wall as B the Crackholes C D the Coat ERack F the STEP 2: Slide onto 3: Mark placement of thethe two screw he wall as G STEP 4: Drill marked holes and insertSTEP the two E the STEP H 5: Secure coat with the brass 60 C D A. mounting bare as illustrated. slide the coat rack off the wo wall plugs and 4x screws. B B mm back 2x 4x 2xplugs. Slide 2x the coat rack G D A. wall mounting bare asthe illustrated. slide the coat rackFscrews. back off the d screws. B B back on 2to inserts and Place the hooks on A 80 mounting bare A. A mm Amounting bare A. the brass inserts. mounting bare C B C A. D E F G
Ø8x38
Ø5x40
4x
4x
Ø4x39
Ø6x30
A
Aon STEP 2: Slide th m the wall as C D mounting bare illustrated. Use the two wall plugs and screws. E 4: Drill the F marked holes G and insert the two STEP E H STEPB 5: Secure the coat C rack with the brass 280 D 60 Aon the wall as B A 2: Slide the Coat 2x Rack the STEP bare 2x 2x 1: Fix the mounting m G Bmm on wall to the F screws. Place the inserts and STEP hooks on onto m A plugs. Slide the coat rack back C D the brass inserts. mounting bare A. Use the two wall plugs and screws. mounting illustrated. bare A.
Ø8x38
A
IN THE BOX
two 2x
4x
STEP C illus as mount
HOOK
A
2x
2x 60 m
2x
A
m
B STEP 6: Fix the with the allen key
D
6
0m A mthe placement of the two screw holes as illustrated. A . STEP 5: Secure B onto STEP Mark STEP 4:D Drill marked andthe insert theØ5x40 twobareEØ6x30 H the3:coat rack with the brass STEP 2: Slide the the Coat Rack holes mounting STEP 6: Fix the Ghooks by tightening Ø4x39 HOOK Ø8x38 C E F G BC B A. the Place coat the rack barethe Gback B B on2xto the F screws. inserts and slide hooks onoff the mountingwith 4xwall plugs. 4x Slide the 2x coat rack2x back allen key J. B STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with the brass STEP 6: Fix the Ghoo D 280 60 the brass inserts. mounting bare A. A m m
wall plugs. Slide the coat rack
mB on to the back
inserts and
F screws.mPlace
the
G hooks on
with the allen key
B STEP Ø6x30 2: Slide the Coat RackHOOKbare onto STEP 3: Markthe thebrass placement the wall asØ8x38 mounting . Athe Ø4x39 inserts. of the two screw holes Ø5x40 B STEP onto the STEP Mark placement of 6the two screw holes unting barescrews. DAon the wall asmounting bare A. 2: Slide the Coat Rack as illustrated. slide3:the coatthe rack back off ugs and B 0the mm 280 the brass STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with I screws 6: Fix the Gback hooks by tightening set E slideSTEP mm bare C D mounting bare A. as illustrated. the coat rack wo wall plugs and screws. B A off the A mounting . Dwall plugs. Slide the coat rack back G B on to the inserts and Fscrews.BPlace the hooks on with the allen key J. mounting bare A. C C D E F G Aon
mounting bare
A.
4x
mm
A
C 4x
60 m
B
the brass inserts.
D
E B
4x
A
F
2x Ø8x38
4x
G
Ø6x30 B 2x
2xØ5x40
B
m
2x
2x
Ø4x39
EHOOK
2x
60 m
m
J.
READ
G
F
H
C H
STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with the brass STEP 6: Fix the F G G B wall plugs. Slide the coat rack back on to the F screws. Place the inserts and hooks on with the allen ke Ø4x39 HOOK Ø8x38 Ø5x40 Ø6x30 C C mounting bare A. the brass inserts. STEP 4: Drill the marked holes and insert the two E H STEP 5: Secure the coat rack with the brass STEP 6: Fix the Ghooks by tightening E 5: Secure the coat rack with the H brass inserts and F screws. D STEP 4: Drill the marked holes and insert the two EE wall plugs. STEP G B wall plugs. Slide the coat rack back on to the inserts and Fscrews. Place the hooks on with the allenHkey J. H B back on to the mounting bare A . G Slide the coat F mounting bare rack A. the brass inserts.Place the hooks on the brass inserts. F G G B A A H rack with the brass E I screws Ghooks by tightening READY TO USE STEP 6: Fix the set mcoat m brass H I screws READY TO USE STEP 6: Fix the Ghooks by tightening set H G s. Place the hooks on J with the allen key . I ks0 mon F with the allen key J. G m G B 60 m
STEP 6: Fix the m
withC the allen key C
hooks by tightening
READY TO USE
set screws
J.
EREADY TO USE H th the brass I screws STEP 6: Fix the Ghooks by tightening set H coat rack with the brass I screws READY TO USE STEP 6: Fix the Ghooks by tightening set G hooks on with the allen key J. G . Place the hooks on J with the allen key . STEP 6: Fix the allen key J .
G
H
F
G
F
hooks by tightening
G
I
E
set screws with the
G
READY TO USE G
F
G
H G
F
H
H
H
2
F
F
2
H WWW.FROSTDENMARK.COM
3
FROST A/S
Headquarter & Showroom Bavne Allé 32 8370 Hadsten Denmark +45 8761 0032 info@frost.dk
Flagship Showroom Christian IX’s Gade 5 1111 Copenhagen Denmark +45 5172 6432 showroom-cph@frost.dk
frostdenmark.com We are also to be found as frostdenmark on facebook, Instagram, Pinterest and LinkedIn