2017 Vision consumer catalogue

2017

AIR 20 YEARS. ONE VISION. Vision products were launched nearly 20 years ago at Kona. Since then they have earned the reputation of being the fastest and most stable components in the professional field. Vision components are designed using Computational Fluid Dynamics (CFD) software and verified through extensive wind tunnel testing.

It is needed to live and breathe, yet when the clock is ticking it is the largest adversary to moving forward. For years Vision Engineers have understood this paradox and worked tirelessly to provide components that will move effortlessly through the air and conserve energy in the process. This ethos has been expanded once again in regards to our new Vision wheel line. We are proud to offer a full range of premium aero profiles for any situation or condition the athlete might encounter. Not only are these profiles aerodynamically superior but they are also refined to be stable in variable to high wind conditions to keep the athlete moving in a straight line.

Wheel development-CFD (Computational Fluid Dynamics)

In the past 3 years Vision engineers have placed rim profile development as a top priority to bring a complete wheel line to the market. Over 350 profiles have been simulated in CFD, which equates to over 2500 + simulations and 1,150+ hours of computing time. 10 deg YAW

METRON PROFILE

10 deg YAW

WIND TUNNEL-VALIDATION OF DESIGN:

For years Vision has been a leader in aero bicycle components. To stay on top, Vision engineers spend many days a year validating internal designs against the competition at some of the top wind tunnels in the U.S. Testing at the A2 (Charlotte N.C) and LSWT SD (San Diego, CA) wind tunnels, Vision engineers follow through the development process and validate the components refined in CFD. This validation is not only to put a real value to the component, but more importantly, the data is taken back and correlated with the CFD . In the end, this correlation of real and virtual data reduces the development cycle for aero designs allowing the development process to move quickly and efficiently before bringing prototypes to the tunnel.

AS A RESULT, OUR VISION PRODUCTS HAVE LEADING EDGE DESIGNS AND PERFORMANCE.

COMPUTATIONAL FLUID DYNAMICS (CFD); TFA PROJECT. Analyzing the aero bar as a complete system is important, but to understand why one aero bar is faster than another, Vision engineers run isolated comparisons through CFD and correlate the change with the overall performance of the bar as the design moves forward. The TFA 3:1 UCI legal aerobar is a great example of this method. Not only is the TFA aero bar UCI legal, but due to the isolated simulations and minimizing unneeded drag, it is also the fastest aero bar Vision has made to date.

E AT

D UP

€ 169,00

METRON FRONT DERAILLEUR

Metron is our fastest and most aerodynamic model line, for the competitor who rides without compromise and demands every watt and gram advantage to have fastest bike possible. You will find Metron components at the top level of professional road racing and triathlon racing, giving the athletes the competitive edge to win!

The Vision Metron front derailleur uses Carbon Link Construction and a wide body spacing for quick and responsive shifting. To aid in durability and further increase shifting precision, the Vision Metron front derailleur uses a full aluminum alloy cage with an engineered wear resistant coating. The braze-on style derailleur is designed for use with chainrings up to 56-tooth and a max tooth difference of 16-teeth between the large and small rings.

Il deragliatore anteriore Vision Metron ha una costruzione in carbonio per il corpo di collegamento e una spazionatura più larga per una risposta di cambiata veloce e rapida. Per incrementare la durata e migliorare la precisione, il deragliatore Vision Metron utilizza una gabbia in alluminio con uno speciale rivestimento protettivo contro l’usura. Il sistema di fissaggio è stato disegnato per utilizzare corone fino a 56 denti e una differenza massima di 16 denti tra le due corone.

• Dual front chainring idex shifting • Alloy inner & outer cage with engineered surface treatment • Wide carbon outer link for superior rigidity and light weight • All stainess steel hardware • Shifter Compatibility; Vision Metron, Shimano 7900 / 7800 SIZES • 1 Size works with compact, standard and TT drive trains • Up to 16 tooth capacity FINISH • Electroless nickel coated, black anodized, UD Finish WEIGHT • 68 g

• Sistema di cambiata indecizzata a due rapporti • Gabbia Interna & Esterna in alluminio con uno speciale trattamento superficiale • Corpo deragliatore oversized in carbonio per una maggiore rigidità e un minor peso. • Viteria in acciaio inox • Leve cambio compatibili con Vision Metron, Shimano 7900/7800 MISURE • Compatibile con guarniture compact, standard e da crono • Capacità massima di 16 denti FINITURA • Carbonio UD per il corpo e nichelatura elettrolitica di rivestimento con parti anodizzate nere. PESO • 68g

TE DA

€ 299,00

METRON REAR DERAILLEUR

€ 1390,00 METRON TFA

• CFD refined and tunnel tested design • One piece carbon construction • UCI 3:1 compliant • Replaceable carbon fiber composite extensions • 3 position armrest width adjustment • Fore and aft armrest adjustment • Ergonomic grip profile for hand comfort • Internal cable routing with side exit on stem • 3% lower drag than any other vision aerobar SIZES • R-bend 290mm (cut to length) • Lengths-adjustable (230mm-290mm) • 410mm base bar width (C to C) • Stem lengths-90mm FINISH • UD Carbon finish • Color graphics options - red, black WEIGHT • 718 g • Design testato con analisi CFD e approvato in galleria del vento • Costruito in un unico pezzo in carbonio • Approvato UCI (3:1) • Estensioni in fibra di carbonio sostituibili • Larghezza poggiagomiti regolabile in tre posizioni • Possibilità di montare i poggiagomiti invertiti, rivolti verso la parte anteriore o posteriore. • Profilo ergonomico per un’ottimo grip e confort di guida MISURE • Passaggio guaine interno con uscita laterale all’attacco • 3% di resistenza aerodinamica inferiore di ogni altro manubrio Vision • Estensioni tipo r-bend da 290mm (taglio a misura) • Lunghezza estensioni regolabile a taglio 230mm 290mm • Larghezza manubrio 410mm (C - C) • Attacco manubrio da 90mm FINITURA • Fibra di carbonio unidirezionale • Grafiche a colori PESO • 718 g

€ 215,00

METRON SHIFTERS • 10sp and 11sp versions available • The Shape design is based on aerodynamics for decreasing wind resistance • UCI Legal • Compatible with Shimano drivetrains SIZES • Fits Ø19.4mm ID (inner diameter) round extension bar FINISH • Black anodized WEIGHT • 138 g (pair)

• Disponibili in versione 10v ed 11 velocità • Il design è basata su studi aerodinamici per ridurre la resistenza al vento • Rispettano le norme UCI • Compatibile con trasmissioni Shimano MISURE • Compatibli con estensioni tonde con diametro interno di Ø19.4mm FINITURA • Anodizzato nero PESO • 138 g (coppia)

A work of art that slices through the wind, the Vision Metron derailleur delivers precise performance and unmatched aerodynamics. Crafted with aluminum and carbon fiber, the Metron rear derailleur sets the standard for time trials and triathlons. An aluminum B-knuckle provides strength, while a composite P-Knuckle, carbon fiber links and inner and outer cages reduce weight and give it an unprecedented aerodynamic advantage. Vision completes the Metron rear derailleur with an 11-tooth upper and an energy-saving 15-tooth lower composite pulley. The Metron rear derailleur is compatible with Vision Metron and Shimano 10-11 speed drivetrains and can accept up to a 28-tooth cassette.

Con un design pensato per fendere il vento, il deragliatore Vision Metron è sinonimo di pura performance e aerodinamica. Costruito in alluminio e fibra di carbonio il deragliatore Metron definisce un nuovo standard per le gare a cronometro e triathlon. Il giunto in alluminio di collegamento al telaio (B-knuckle) fornisce resistenza, mentre il giunto di collegamento alle pulegge e le gabbie interna/esterna riducono peso garantendo anche una aerodinamica che non ha precedenti. Il deragliatore Metron si avvale di cuscinetti ceramici che permettono un risparmio di energia grazie al doppio sistema di pulegge: la superiore con profilo a 11 denti e l' inferiore a 15 denti. Il deragliatore è compatibile con il gruppo Vision Metron e gruppi Shimano 10 velocità e può accettare cassette fino a 28 denti.

• New vision metron 10 speed system • Full carbon construction • Astoundingly light weight • Shifter compatibility: vision metron, Shimano 7800 / 7900 • Cassette compatibility: vision metron, Shimano, SRAM • Energy saving pulley composite pulleys SIZES • Short cage FINISH • UD carbon finish WEIGHT • 175g

• Nuovo cambio vision metron a 10 velocità • Costruzione Full Carbon • Ultra leggero • Comandi compatibili: vision metron, Shimano 7800 / 7900 • Cassette compatibili: vision metron, Shimano, SRAM • Energy saving pulley composite pulleys MISURE • Gabbia corta FINITURA • Carbonio UD PESO • 175 g

€ 159,00 METRON 11S CASSETTE Vision's Metron Cassette deploys our proprietary "No-Rivet Construction" which allows for complete strip-down and thorough cleaning, in order to maintain the highest performance and ensure the greatest durability. There is no chance of loosening or breaking of rivets.

La cassetta Vision utilizza la nostra esclusiva “costruzione senza rivetti”, che consente lo smontaggio completo per una pulizia accurata, in modo da mantenere il più alto livello di prestazioni e garantire la massima durata nel tempo. Non c’è possibilità di allentamento o rottura di rivetti.

• 11-speed cassette sporcket • Heat-Treated carbon steel cogs • Large contact area saves alloy freehub bodies SIZES • Combinations : 11-23, 11-25 FINISH • Electroless nickel plated cogs • Anodized red : lock ring, spider WEIGHT • 257 g

• Cassetta pignoni a 11 rapporti • Pignoni in acciaio trattati termicamente • Area di contatto ampia per salvare il corpo ruota libera MISURE • Combinazioni: 11-23, 12-25 FINITURA • Nichelatura elettrolitica per i pignoni • Anodizzazione rossa: spider e ghiera chiusura PESO • 257 g

E AT

D UP

€ 146,90 METRON AER BRAKE LEVERS • Utilizes internally expanding wedge design with full internal cable routing • Ergonomic lever shape • Left and right side specific design • Designed for single or dual pivot short pull brake calipers • Includes Vision dragon brake cable set SIZES • Compatible with Ø24mm OD bars FINISH • UD carbon finish • Color graphics WEIGHT • 85.2 grams (pair)

€ 359,00

METRON 4D COMPACT •Utilizza sistema di montaggio con passaggio cavi interno •Leve ergonomiche •Design differenziato per leva destra e sinistra •Compatibili con freni tradizionali o dual pivot •Include set di cavi Vision Dragon MISURE •Compaitibli con manubri di diamentro Ø24mm FINITURA •Carbonio UD PESO •85.2 g (coppia)

VisionTech DragOn brake cable set included with all Vision brake lever sets

TE DA

€ 690,00

• Manubrio realizzato interamente in composto di Carbonio/Kevlar • Sezione centrale aerodinamica ed ergonomica che segue l’arco naturale delle braccia con un rotazione in avanti della piega di 10 °per una posizione più confortevole in salita ed una respirazione migliore. • Passaggio cavi interno compatibile con nuovi gruppi elettronici Di2 • Zone di serraggio rinforzate ed irruvidite MISURE • Ø31.8mm x W400+10mm, 420+10mm, 440+10mm (c-c) • 125mm drop, 80mm reach • 2˚ apertura delle code FINITURA • Carbonio UD • Grafiche colorate - rosso o grigio PESO • 240 g (420mm)

5mm

10°

METRON TT BB386EVO The newest generation of Vision's top-of the line Metron crankset with superior aerodynamics and stiffness. Designed and refined using CFD, this crank-set has 7.5% less drag than its already fast predecessor.

L'ultima generazione della guarnitura top di gamma Vision Metron con performance, aerodinamica e rigidità ancora superiori. Grazie al suo design testato con analisi CFD, ha il 7,5% in meno di resistenza aerodinamica rispetto alla precedente versione.

• Monocoque design with hollow carbon arms, UD weave finish • AL7075 CNC chainrings • AL7075 Torx T-30 alloy chainring bolts • Available for Shimano new 11 speed system • CFD refined crank arm and spider profile SIZES • Length - L170mm, L172.5mm, L175mm, L177.5mm, L180mm • BCD - 130mm FINISH • UD carbon finish • Color graphics options - red, gray CRANK WEIGHT • 744 g

• Pedivelle cave monoscocca in carbonio UD • Corone in AL7075 lavorate CNC • Viti corone Torx T-30 in lega AL7075 • Disponibile per Shimano 11 velocità • Pedivella e profilo spider testati e rifiniti con analisi CFD MISURE • Lunghezza - L170mm, L172.5mm, L175mm, L177.5mm, L180mm • interasse viti - 130 millimetri FINITURA • Finitura UD carbon • Grafiche - rosso, grigio PESO PEDIVELLA • 744 g

€ 327,00 METRON AERO STEM Vision carbon technology and aerodynamic expertise applied to a brand new top-clamp carbon stem. CFD designed and refined the Metron Aero stem has the lowest drag of any Vision stem to date.

Tutta la tecnologia del carbonio e le competenze aerodinamiche di Vision applicate al nuovo attacco manubrio in carbonio. Progettato e rifinito a seguito di Analisi CFD, l’attacco Metron Aero ha la resistenza aerodinamica più bassa rispetto ad ogni altro attacco Vision realizzato fino ad oggi.

• Monocoque Carbon body • Carbon faceplate • Titanium hardware • Low profile frontal area and recessed fasteners for superior aerodynamics • 18% less drag than any Vision stem SIZES • - 6º x L100, 110, 120, 130, 140mm • Ø31.8mm handlebar clamp diameter • 40mm fork clamp stack height FINISH • UD Carbon finish • Color graphics options - red, gray WEIGHT • 162 g (100mm)

• Monoscocca in carbonio • frontalino in carbonio • viteria in titanio • area frontale basso profilo con elementi di fissaggio a scomparsa per un aerodinamica superiore • 18% in meno di resistenza aerodinamica rispetto ad ogni altro attacco Vision TAGLIE • - 6º x L100, 110, 120, 130, 140 mm • Diametro manubrio Ø31.8mm • Altezza morsetto forcella 40mm FINITURA • Finitura Carbonio UD • opzioni grafiche di colore - rosso, grigio PESO • 162 g (100 mm)

10°

W NE € 343,00 METRON CARBON STEM W NE

€ 649,00

METRON 5D INTEGRATED

5mm

• The stiffest and most aero integrated handlebar and stem system • All carbon construction • Di2 compatible with integrated junction box compartment and wiring conduits SIZES • L100 x W400 (c-c) • L110 x W400, 420, 440mm (c-c) • L120 x W400, 420 (c-c) • L130 x W 420, 440mm (c-c) • Compact 125mm drop, 80mm reach FINISH • UD carbon finish • Neutral graphics WEIGHT • 395 grams

• Manubrio dal design unico per abbracciare la miglior prestazione aerodinamica di sempre unita ad una rigidità estrema • Interamente in carbonio • Di2 compatibile per una perfetta integrazione del passaggio cavi, interamente coperti MISURE • L100 X W400 (c-c) • L110 x W400, 420, 440mm (c-c) • L120 x W400, 420 (c-c) • L130 x W420, 440mm (c-c) • Compact 125mm drop, 80mm reach FINITURE • Carbonio UD • Grafiche neutre PESO • 395g

• Optimized aero design • Full carbon body • Ultralight Ti hardware SIZES • -6 x L100, 110, 120, 130mm • Shim to adapt 1-1/4” stem to 1-1/8” steer tube included FINISH • Body - UD carbon finish • Faceplate - anodized black • Neutral graphics WEIGHT • 150 grams (100mm)

• Design ottimizzato per la migliore aerodinamica • Corpo in carbonio • Viti in titanio ultraleggere MISURE • -6° x 100, 110, 120, 130mm • Riduzione inclusa per essere utilizzato sia per forcelle 1-1/8” sia 1-1/4” FINITURE • Carbonio UD • Frontalino allumino nero anodizzato PESO • 150g

€ 2.000,00 Clincher € 1.900,00 Tubular W

METRON 81 SL

• Cerchio alto profilo in carbonio di 81mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93, pattini freno, prolunghe valvola e borsa portaruote

• Full Carbon 81mm section tubular rim • P. R.A. hubs with DP spokes • 6 sealed cartridge bearings (2F + 4R) • 2:1 aero bladed spokes 16F / 21R • Angular contact bearings on rear hub • Aero bladed spokes • ABS self locking nipples • Artisan built, entirely by hand • Includes QR-93, brake pads, valve extenders and spoke protector SIZES • Aluminum Shimano or Campagnolo 10-11sp freehub FINISH • Color graphics options - grey WEIGHT • 1,460 grams / pair (w/o QR)

SIZES • Aluminum Shimano or Campagnolo 10-11sp freehub FINISH • Color graphics options - grey WEIGHT • 1,820 grams / pair (w/o QR)

€ 244,00

TECH

COPERTONCINO

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità FINITURA • grigio PESO • 1820g

METRON SB0 • Reggisella interamente in carbonio • Sistema box-section in carbonio • Attacco sella forgiato in allumino dal design minimalista MISURE • L350, 400mm x 27.2, 31.6mm • 0mm arretramento sella FINITURA • Carbonio UD • Grafica neutra PESI 228g

15 40

• One piece continuous carbon fiber construction • Box-section carbon head • Forged alloy minimalist clamps SIZES • L350mm x Ø27.2, Ø31.6mm • 0mm setback FINISH • UD carbon finish • Neutral graphics WEIGHT • 228 grams (Ø31.6x350mm)

• Reggisella interamente in carbonio • Sistema box-section in carbonio • Attacco sella forgiato in allumino dal design minimalista MISURE • L350, 400mm x 27.2, 31.6mm • 25mm arretramento sella FINITURA • Carbonio UD • Grafica neutra PESI 220g

METRON SB25

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità FINITURA • grigio PESO • 1460g

CLINCHER

W NE

€ 244,00

TUBOLARE

W NE

• One piece continuous carbon fiber construction • Box-section carbon head • Forged alloy minimalist clamps SIZES • L350, 400mm x Ø27.2, Ø31.6mm • 25mm Setback FINISH • UD carbon weave • Neutral graphics WEIGHT • 220 grams (Ø31.6x350mm)

TUBULAR

w/ Di2 battery adapter

25.5

VT-855CH

VT-840CH

13 18.1

Standard

VT-602/VT-300/RD-61

Garmin

Φ631.5

27.5

22 26

TX-51

20.4

VT-872/Disc VT-880

24.8

VT-880-v2 暫不用

14.7 21

21.5

17.5 27

RD-887/876CH-38 VT-840CH-NEW

26.1

RD-886/875CH-55 TX-920/915/918

• Design integrato per la massima aerodinamicità • Compreso di porta computer e/o porta garmin • Sistema removibile brevettato per una facile e rapida azione di rabbocco MISURE • 600ml FINITURE • Borraccia – nera con inserti grafica neutra • Grafica neutra PESO • 310g

VT-880CH

• CFD refined integrated bottle with bento box and computer mount • Articulated straw mount to allow precise angulation and unobtrusive fold-away • Patented and removable labyrinth water fill-spout for rapid refills without splashing SIZES • 600ml FINISH • Bottle - black, translucent white • Color graphics WEIGHT • 310 grams

23 24.3

24.8

€ 85,00 METRON FRONT HYDRATION SYSTEM

14.7

Φ634

W NE

RD-430 24.3

18.9

22.1

23.7

21.6

VT-301_VT-301/DB_603-NEW QR-93

VT-604/DB-NEW

AM-960

VT-621 CSI

27 31

24.8

RD-8

€ 1.970,00 Clincher € 1.870,00 Tubular

METRON 55 SL

NE • Cerchio alto profilo in carbonio di 55mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93, pattini freno, prolunghe valvola e borsa portaruote

TUBULAR

SIZES • Aluminum Shimano or Campagnolo 10-11sp freehub FINISH • Color graphics options - grey WEIGHT • 1,430 grams / pair (w/o QR)

25.5

COPERTONCINO

CLINCHER

SIZES • Aluminum Shimano 10-11sp freehub • ISO 6-Bolt Rotor Mount • Centerlock Rotor Mount FINISH • Color graphics options - grey WEIGHT • 1,630 grams / pair (w/o QR)

25.5

VT-855CH

VT-840CH

TUBOLARE

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Mozzo per montaggio disco rotore ISO 6 fori • Mozzo per montaggio disco rotore center lock FINITURA • Grigio PESO • 1520g

COPERTONCINO

MISURE13.5 17 • Corpo cassetta in alluminio, compatibile Shimano19.4 10-11 o Campagnolo 10-11 velocità 22 FINITURA • Grigio PESO • 1630g RD-65A

SIZES • Aluminum Shimano 10-11sp freehub • ISO 6-Bolt Rotor Mount • Centerlock Rotor Mount FINISH • Color graphics options - grey WEIGHT • 1,520 grams / pair (w/o QR)

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 17 velocità FINITURA 22 • Grigio PESO • 1540g RD-65A

19.4

TUBULAR

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità FINITURA • Grigio PESO • 1430g 25

SIZES • Aluminum Shimano or Campagnolo 10-11sp freehub FINISH • Color graphics options - grey WEIGHT 13.5 • 1,540 grams / pair (w/o QR)

• Cerchio alto profilo in carbonio di 55mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93, pattini freno, prolunghe valvola e borsa portaruote

• Full Carbon 55mm section clincher rim • P. R.A. hubs with DP spokes • 6 sealed cartridge bearings • 2:1 aero bladed spokes 21F / 24R • ABS self locking nipples • Artisan built, entirely by hand • Includes QR, brake pads and spoke protector • Options for (front) QR, QR-9, TA-12 or TA-15, and (rear) QR, QR-10, TA-12 or X-12 • Includes wheels bag

TUBOLARE

CLINCHER

METRON 55 SL DISC

• Full Carbon 55mm section tubular rim • P. R.A. hubs with DP spokes • 6 sealed cartridge bearings (2F + 4R) • 2:1 aero bladed spokes 16F / 21R • Angular contact bearings on rear hub • Aero bladed spokes • ABS self locking nipples • Artisan built, entirely by hand • Includes QR-93, brake pads, valve extenders and spoke protector • Includes wheels bag

€ 1.970,00 Clincher € 1.870,00 Tubular

13 18.1

VT-602/VT-300/RD-61

60.5

VT-840CH

VT-830

RD-887/876CH-38

14.7 14.7

RD-65A

24.8

RD-88525

RD-886/875CH-55

24.8

17 24.3 25.5

RD-887/876CH-38

VT-880

24.8

RD-88525

RD-886/875CH-55

24.8

17 24.3 25.5

VT-840

VT-855

18.1

VT-840CH

VT-855CH

60.5

VT-602/VT-300/RD-61

14.7

VT-840

VT-840CH

VT-855CH

14.7 23

24.3

VT-855

18.1

15 38

19.4

17 38

13.5

VT-830

RD-430 15

VT-620_RD-635

TX-51

20.4

430

TX-51

21.2

VT-620_RD-635

Φ631.5

0.4

27.5

15.3

21.2

Φ631.5

15.3

VT-602/VT-300/RD-61

VT-620_RD-635

VT-830

TX-51

20.4

RD-430

QR-93

Φ631.5

21.2

20.4

27.5

Φ631.5

27.5

15.3

855CH

14.7

€ 1.950,00 Clincher € 1.850,00 Tubular

METRON 40 SL

TUBULAR

SIZES • Aluminum Shimano 10-11sp freehub FINISH • Color graphics options - grey WEIGHT • 1,330 grams / pair (w/o QR)

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità FINITURA • Grigio PESO • 1490g

TUBOLARE DISCO

CLINCHER

SIZES • Aluminum Shimano 10-11sp freehub • ISO 6-Bolt Rotor Mount • Centerlock Rotor Mount FINISH • Color graphics options - grey 13.5 WEIGHT • 1,580 grams / pair (w/o QR) 19.4 Options for (front) QR, QR-9, TA-12 or TA-15, and (rear) QR, QR-10, TA-12 or X-12 25

COPERTONCINO

15 50

MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità FINITURA • Grigio PESO • 1330g

19.4

SIZES • Aluminum Shimano 10-11sp freehub • ISO 6-Bolt Rotor Mount • Centerlock Rotor Mount FINISH • Color graphics options - grey WEIGHT • 1,420 grams / pair (w/o QR) Options for (front) QR, QR-9, TA-12 or TA-15, and (rear) QR, QR-10, TA-12 or X-12

TUBULAR DISC

SIZES • Aluminum Shimano or Campagnolo 10-11sp freehub FINISH • Color graphics options - grey WEIGHT • 1,490 grams / pair (w/o QR)

• Cerchio alto profilo in carbonio di 40mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93, pattini freno, prolunghe valvola e borsa portaruote

• Full Carbon 40mm section clincher rim • P. R.A. hubs with DP spokes • 6 sealed cartridge bearings • 2:1 aero bladed spokes 21F / 24R • ABS self locking nipples • Artisan built, entirely by hand • Includes QR, brake pads and spoke protector • Includes wheels bag

TUBOLARE

CLINCHER

13.5

• Full Carbon 40mm section tubular rim • P. R.A. hubs with DP spokes • 6 sealed cartridge bearings (2F + 4R) • 2:1 aero bladed spokes 16F / 21R • Angular contact bearings on rear hub • Aero bladed spokes • ABS self locking nipples • Artisan built, entirely by hand • Includes QR-93, brake pads, valve extenders and spoke protector • Includes wheels bag

30 20

25.5

VT-855CH

VT-840CH

COPERTONCINO

MISURE • Corpo17 cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità 22 FINITURA • Grigio PESO •1790g RD-65A

RD-65A 23

13 18.1

VT-602/VT-300/RD-61

60.5

20 15.3

VT-830

TX-51

15 20.4

VT-620_RD-635

VT-830

TX-51

RD-430

13.5

19.4

40 50

19.4 24

13.5

40 50

VT-620_RD-635

21.2

Φ631.5

21.2

27.5

15.3

RD-65A 17

24.8

24.3 25.5

25 13 RD-886/875CH-55

24.8 20

RD-885

18.1

14.7

VT-840 VT-855 VT-840CH

VT-602/VT-300/RD-61

RD-887/876CH-38

VT-880

24.8

13 RD-886/875CH-55

24.8 20

24.3 25.5

RD-885

18.1

VT-840 VT-855 VT-840CH

VT-855CH

60.5

VT-855CH

24.3

14.7

VT-602/VT-300/RD-61

20.4

VT-620_RD-635

VT-830

TX-51

VT-620_RD-63

TX-51

QR-93

RD-430

14.7 23

14.7

14.7 24.8

14.7

24.8

RD-430

15 20.4

21.2

QR-93

Φ631.5

21.2

15.3 27.5

Φ631.5

27.5

15.3

CH-38

METRON 40 SL DISC

€ 1.240,00 front € 1.350,00 rear

€ 1.679,00

METRON 3 SPOKE

METRON DISC

• CFD refi ned, wind tunnel tested full carbon 60.5mm section profi le for tubular tire • Balanced layering of UD and 3K carbon fi bers • P.R.A. hubs with preload reduction assembly system • 6 sealed chromoly steel cartridge bearings (2F+4R) mounted onto a 17mm axle • 3 Carbon bladed spokes • Hand laminated rim and spoke • Includes special alloy quick releases (QR-93), brake pads, valve extenders, and wheel bags SIZES • Aluminum freehub body for Shimano 9-1011sp or Campagnolo 10-11sp • Minimum tire requirement of 23mm FINISH • Rims - 3K carbon fi nish • Hubs, sandblasted and black anodized with color decal logos. • Color graphics options - red, gray WEIGHT • 2,200 g / pair (w/o QR)

• Design affi nato con analisi CFD e testato in galleria del vento; cerchio da 60.5mm per tubolare • Stratifi cazione bilanciata di fi bre di carbonio UD e 3K • Mozzi con sistema PRA di regolazione del precarico Cuscinetti • 6 cuscinetti ceramici a cartuccia (2 ant. + 4 post.) montati su un perno mozzo da 17mm. • 3 razze aerodinamiche in carbonio • Laminazione manuale di profi lo e razze • Include sganci rapidi con leva in alluminio (QR-93), pattini freno, prolunghe valvola e borsa portaruote. MISURE • Corpo cassetta in alluminio, compatibile Shimano 9-10-11v o Campagnolo 10-11v. • Minima sezione del pneumatico raccomandata di 23mm FINITURA • Cerchi - fi bra di carbonio 3K • Mozzi: sabbiato anodizzato nero con grafica colorata • Opzione grafi che colorate - rosso, grigio PESO • 2,200 g / paio (senza sganci)

• Cerchio full carbon per tubolare con carenature in carbonio unidirezionale (UDF) • 4 cuscinetti Ceramici montati su un perno mozzo da 17mm. • Assemblate, tensionate e montate interamente a mano • Include speciale sgancio in alluminio (QR-91), pattini freno, prolunga valvola e copertura valvola. MISURE • Corpo cassetta in alluminio, compatibile Shimano 9-10-11v o Campagnolo 10-11v. FINITURA • Cerchio fibra di carbonio unidirezionale (UDF) • Carenature fibra di carbonio unidirezionale (UDF) • Mozzo posteriore – alluminio anodizzato nero • Opzione grafiche colorate - rosso, grigio PESO • 995 g (senza sgancio)

• Full UD carbon fairings construction • 4 sealed chromoly steel cartridge bearings mounted on a 17mm hub axle diameter • Artisan built, entirely by hand • Includes special alloy QR (QR-91), brake pads and valve extenders SIZES • Aluminum freehub body for Shimano 9-1011sp or Campagnolo 10-11sp FINISH • Rim – UD carbon fi nish • Fairings – UD carbon fi nish • Rear hub – black anodized • Color graphics options - red, gray WEIGHT • 995 g (w/o QR)

Le prime ruote Vision a 3 razze in carbonio, per alte prestazioni su strada e pista.

Vision’s fi rst 3-spoke carbon wheel for Worldclass road and track applications.

13.5 19.4

17.5

VT-880CH

RD-65A 20

24.8

40 16

Φ634

24.3

VT-872/Disc

VT-880-v2 暫不用

TX-9 VT-840CH-NEW

21.2 23

15.3 22

QR-93

60.5

VT-620_RD-635

18.9

22.1

23.7

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

27 31 AM-960

VT-830

TX-51

31 14.7 21

QR-93 24.8

24.8

AVAILABLE IN COLORED GRAPHICS

24.3

RD-886/875CH-55

RD-885

VT-840 VT-855

E AT

D UP

€ 305,00 TRIMAX CARBON CLIP-ON

R-BEND

• Carbon fi ber composite extension bar • Fast adjustable • Internal cable routing with rear exit • Armrests adjust to 40mm width range • Di2 compatible SIZES • For Ø31.8mm basebar • Sliders Lengths - Adjustable from 230 - 290mm • 24.5mm rise, 5° up sweep FINISH • UD carbon fi nish • Color graphics options - red, gray WEIGHT • 496 g

T h e Tr i M a x C a r b o n s e r i e s o f components offer the best combination of light weight, aerodynamics, and performance. The components are designed to adjust to all rider types suiting road and triathlon pro's and age-groupers alike.

• Estensioni manubrio in carbonio • Sistema di regolazione F.A.S.T. • Passaggio cavi e guaine interno con uscita posteriore • Poggiabraccia regolabili in larghezza fi no ad un range di 40mm • Compatibili con Di2 MISURE • Compatibili con manubri da Ø31.8mm • Lunghezza delle estensioni regolabile da 230 a 290mm • rialzo di 24.5mm con 5° di angolo FINITURA • Fibra di carbonio unidirezionale • Grafi che a colori PESO • 496 g

TRIMAX CARBON

• Ceramic BB30 bearings • Carbon / AL7075 CNC chainrings • AL7075 Torx T-30 alloy chainring bolts • Available for Shimano New 11 speed system SIZES • Length - L155mm, L160mm, L165mm,L170mm, L172.5mm, L175mm, L177.5mm, L180mm • BCD - 130mm • 53/39T, 54/42T, 55/42T FINISH • UD Carbon fi nish • Color graphics • Carbon / alloy outer chainring with color logo CRANK WEIGHT • 730 g

• Cuscinetti BB30 con sfere ceramiche • Corone in AL7075 lavorate CNC con rivestimento in carbonio • Viti corone Torx T30 in AL 7075 • Disponibile per con gruppi Shimano a 11 velocità. MISURE • Lunghezze - L155mm, L160mm, L165mm, L170mm, L172.5mm, L175mm, L177.5mm, L180mm • Interasse viti - 130mm • 53/39T, 54/42T, 55/42T FINITURA • Finitura carbonio UD • Grafi che colorate • Corona esterna in carbonio UD e alluminio con logo colorato PESO GUARNITURA • 730 g € 590,00

€ 319,00 TRIMAX CARBON BASE BAR • Carbon fiber basebar • CFD refined for optimized aerodynamics • Fits most standard clip-on aero extensions • Fully internal cable routing - Di2 compatible SIZES • Fits Ø31.8mm stem & clip-on clamps • Width - W 410mm (c-c) • Drop: 0mm • UCI 3:1 legal FINISH • UD carbon fi nish • Color graphics WEIGHT • 205 g

€ 590,00

J-BEND

• Base manubrio da crono in carbonio • Profi lo rifi nito CFD per un’aerodinamica ottimale • Compatibile con la maggior parte dei clip on • Passaggio cavi interno – compatibile con Di2. MISURE • Manubrio con Ø31.8mm • Larghezza manubrio base 410mm (c-c) • Inclinazione: 0mm • conforme a norma UCI 3:1 FINITURA • Carbonio UD • Grafi ca colorata PESO • 205 g

Union Cyclist Intemational Legal

€ 272,00 TRIMAX CARBON 4D COMPACT Incorporating the novel features and benefits of the revolutionary Metron 4D bar into a TriMax Carbon version.

E AT

D UP

J-BEND

R-BEND

€ 759,00 TRIMAX CARBON SI • Carbon fi ber composite extension bar • UCI compliant 3:1 profi le • Fast adjustable • Internal cable routing with rear exit • Armrests adjust to 40mm width range • Di2 Compatible SIZES • For use with Ø31.8mm stem • Wing width - 410mm (c-c) • Sliders Lengths - Adjustable from 230 - 290mm FINISH • UD carbon fi nish • Color graphics options - red, gray WEIGHT • 1034 g • Estensioni in fi bra di carbonio composita • Conforme alla regolamentazione UCI 3:1 • Sistema di regolazione F.A.S.T. • Passaggio cavi interno con uscite posteriori • Compatibile con Di2 • Poggiabraccia regolabili in larghezza con un range di 40mm • Compatibile Di2 MISURE • Compatibile con attacchi di diametro Ø31.8mm • Larghezza base 410mm (c-c) • Lunghezza delle estensioni regolabile da 230 a 290mm FINITURA • Finitura carbonio UD • grafi che: disponibile in rosso e grigio PESO • 1034 g

• Continuous carbon composite construction • Aero-Ergo flat-top riser central section follows the natural arc of the arms with a 10° forward bend for more ergonomic climbing position and easier breathing • Cable groove compatible with new DI2 systems w/ larger internal cable tunnel • Reinforced and textured lever and stem clamping areas SIZES • Ø31.8mm x W400+10mm, 420+10mm, 440+10mm (c-c) • 125mm drop, 80mm reach • 2˚ outward bend FINISH • UD carbon finsh • Color graphics options - red, gray WEIGHT • 225 g (420mm) Le nuove caratteristiche ei vantaggi del rivoluzionario Metron 4D bar in una versione TriMax Carbon. • Manubrio realizzato interamente in composto di Carbonio/Kevlar • Sezione centrale aerodinamica che segue l’arco naturale delle braccia grazie alla rotazione in avanti di 10° del Impugnatura per una posizione più ergonomica in salita e una respirazione più facile. • Passaggio cavi interno più ampio compatibile con nuovi gruppi elettronici MISURE • Ø31.8mm x W400+10mm, 420+10mm, 440+10mm (c-c) • 125mm drop, 80mm reach • 2˚ apertura delle code FINITURA • Carbonio UD • Grafiche colorate - rosso o grigio PESO • 225 g (420mm)

5mm

€ 839,00

€ 799,00

TRIMAX CARBON 35

T42

CLINCHER

CLINCHER • Cerchio alluminio-carbonio CSI da 42mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; raggi a testa dritta • 6 cuscinetti a cartuccia (2 ant. + 4 post.) montati su un perno mozzo da 17mm. • Raggi piatti aerodinamici • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio (QR-65), e nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 9-10-11v o Campagnolo 9-10-11v. • Raggi (A/P): 16 radiali ruota anteriore; 21 ruota posteriore,14 incrociati x2 lato destro e 7 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – carbonio 3K • Mozzo anteriore e posteriore - alluminio nero anodizzato • Raggi – grigio PESO • 1,720 g / coppia (senza QR)

24.3

• CSI carbon alloy clincher rim ; 42mm height • Extra light P.R.A. hubs for DP spokes • 6 sealed cartridge bearings (2 F+4 R) mounted on a 17mm hub axle diameter • Aero blade spokes • ABS self-locking nipples • Artisanal built, entirely by hand • Includes alloy QR-65 and rim tape SIZES • Aluminum freehub body for Shimano 9-10-11sp or Campagnolo 10-11sp • Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 2 drive side and 7 radial non drive side (2:1 ratio) FINISH • Rims – 3K Carbon finish • Front & rear hubs – black anodized • Spokes – black • Color graphics options - bed, gray WEIGHT • 1,720 g / pair (w/o QR)

• Cerchio alluminio-carbonio CSI da 35mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; raggi a testa dritta • 6 cuscinetti a cartuccia (2 ant. + 4 post.) montati su un perno mozzo da 17mm. • Raggi piatti aerodinamici • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio (QR-65), e nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 9-10-11v o Campagnolo 9-10-11v. • Raggi (A/P): 16 radiali ruota anteriore; 21 ruota posteriore,14 incrociati x2 lato destro e 7 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – carbonio 3K • Mozzo anteriore e posteriore - alluminio nero anodizzato • Raggi – grigio PESO • 1,640 g / coppia (senza QR)

• CSI carbon alloy clincher rim ; 35mm height • Extra light P.R.A. hubs for DP spokes • 6 sealed cartridge bearings (2 F+4 R) mounted on a 17mm hub axle diameter • Aero blade spokes • ABS self-locking nipples • Artisanal built, entirely by hand • Includes alloy QR-65 and rim tape SIZES • Aluminum freehub body for Shimano 9-10-11sp or Campagnolo 10-11sp • Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 2 drive side and 7 radial non drive side (2:1 ratio) FINISH • Rims – 3K Carbon finish • Front & rear hubs – black anodized • Spokes – black • Color graphics options - bed, gray WEIGHT • 1,640 g / pair (w/o QR)

24.3

Φ634

24.8

30 VT-880CH

VT-872/Disc

13.7

19.4

20.1

RD-65

26.1

VT-880-v2 暫不用

13.5

21.5

17.5

24.8

VT-840CH-NEW 25

17 TX-920/915/918 25.5

VT-840CH 60.5

VT-855CH

18.1

VT-602/VT-300/RD-61

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

23.7

15.3

Φ631.5

18.9

27.5

17 22.1

AM-960

21.2

VT-620_RD-635

VT-830

XC-918/908

RD-430

QR-91 40

QR-91

20.4

14.7 23 24.3

VT-880

14.7

RD-887/876CH-38

24.8

24.5 24

RD-886/875CH-55

RD-885

VT-840 VT-855

€ 849,00

TRIMAX CARBON 45 CLINCHER

• CSI Carbon Alloy clincher rim ; 45mm deep • Alloy hubs for DP spokes • 6 sealed cartridge bearings (2 F+4 R) mounted on a 17mm hub axle diameter • Aero blade spokes • Special ABS self locking nipples • Artisanal built, entirely by hand • Includes Mercury alloy QR and useful wheels protection SIZES • Aluminum freehub body for Shimano 9-10-11sp • Spokes (F/R): 16 radial front wheel; 21 rear heel, 14 cross X 2 drive side and 7 radial non drive side (2:1 ratio) FINISH • Rims – 3K Carbon finish • Front & Rear hubs – Black anodized • Spokes – black WEIGHT • 1,720 grams / pair (w/o QR)

€ 199,00

24.3

25 50

• Cerchio alluminio-carbonio CSI da 45mm • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93 nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità FINITURE • Cerchio – carbonio 3K • Mozzo anteriore e posteriore – alluminio nero anodizzato • raggi – neri PESO 1720g

TRIMAX CLIP-ON

13.5

13.7

19.4

20.1

RD-65 17

25.5

VT-840CH 60.5

The TriMax series represents the very best alloy components available for the race against the clock. With outstanding aerodynamic technology and great fitment options, each part represents a smart selection for riders wanting durability and high performance.

Highly adjustable clip-on armrest and extension mounts coupled to butted alloy extensions.

Clip-on altamente regolabili con supporti ed estensioni in alluminio a doppio strato.

• Double butted alloy extension bar • Fast adjustable • Internal cable routing with rear exit • Armrests adjust to 40mm width range • Di2 Compatible SIZES • For Ø31.8mm Basebar • Sliders Lengths - Adjustable from 230 - 290mm FINISH • Polished anodized black • White graphics WEIGHT • 667 g (J-Bend) • 651g (R-Bend)

• Estensioni in alluminio a doppio strato • Sistema di regolazione F.A.S.T. • Passaggio cavi interno con uscita posteriore • Braccioli regolabili in larghezza con un range di 40mm • Compatibili con Di2 MISURE • Compatibili con manubri da Ø31.8mm • Lunghezza estensioni- regolabile da 230 - 290 millimetri FINITURA • Lucido anodizzato nero • Grafi che bianche PESO • 667g (J-Bend) • 651g (R-Bend)

R-BEND

Φ631.5

15.3 21.2

VT-620_RD-635

VT-830

XC-918/908

QR-93

14.7 14.7

J-BEND

24.8

24.5 24

RD-887/876CH-38

RD-886/875CH-55

RD-885

VT-840 VT-855

€ 249,00 TRIMAX COMPACT TT MEGAEXO • Forged alloy arms with aero shape • Ø24mm integrated chromoly spindle • AL7075 100% CNC outer chainring • AL7075/T6 stamped middle chainring • Chromoly chainring bolts • NBD (No Pinch Bolt Design) • Available for Shimano New 11 speed system SIZES • Length - L155mm, L160mm, L165mm, L170mm, L172.5mm, L175mm • BCD - 110mm • 50/34T, 52/38T FINISH • Storm grey anodized • Laser graphics CRANK WEIGHT • 839 g • Forged alloy arms with aero shape • Ø24mm integrated chromoly spindle • AL7075 100% CNC outer chainring • AL7075/T6 stamped middle chainring • Chromoly chainring bolts • NBD (No Pinch Bolt Design) • Available for Shimano New 11 speed system SIZES • Length - L155mm, L160mm, L165mm, L170mm, L172.5mm, L175mm • BCD - 110mm • 50/34T, 52/38T FINISH • Storm grey anodized • Laser graphics CRANK WEIGHT • 839 g

VISION DS1 DRINK SYSTEM • New DS1 drink system uses conventional water bottle body • CFD-design head unit gives aerodynamic frontal profile • Head unit with anti-splash, quick-fill port, and adjustable straw • Ergonomically positioned computer mount • Universal “V-cage” mounts on any extensions SIZES • 750ml FINISH • Color graphics WEIGHT • 241 grams • Nuovo design studiato per le più convenzionali protesi manubrio presenti sul mercato • Il profilo frontale aerodinamico regala una grande penetrazione all’ aria • Sistema anti-schizzo • Porta computer ergonomico e aerodinamico MISURE • 750ml FINITURE • Grafica colorata PESO • 241g

€ 119,00

TRIMAX AERO • Utilizes internally expanding wedge design with full interna cable routing • Ergonomic lever shape • Left and right side specifi c design • Designed for single or dual pivot short pull brake calipers • Includes Vision DragOn brake cable set SIZES • Compatible with Ø24mm OD bars FINISH • Anodized black fi nish • Laser graphics WEIGHT • 91 g (pair)

W NE € 69,00 TRIMAX REAR HYDRATION SYSTEM • Modular saddle drink system universally fits both traditional and snub-nose saddles • Multiple mounting and lashing points can be customized for water bottle, CO2 pump, accessory bag, and tie-strap combinations • 3-Position (40 degrees) saddle rail mounting options. • Bottle cages are mounted for optimized accessibility and ideal aerodynamics • 5-Position (40 degrees) bottle cage tilt adjustability. • Precision-made alloy frame with corrosionresistant hardware • Includes Saddle Mount and two High Grip Cages (V0135) FINISH • Saddle Mount - bead blasted anodized black • Neutral graphics WEIGHT • 191 grams

€ 75,90

• Sistema di idratazione universale e modulare per il retro sella • Montaggio multiplo e possibilità di personalizzazione per la vostra miglior combinazione di accessori • 3 posizioni di aggiustamento • Portaborracce montati per ottimizzare aerodinamica e accessibilità • Telaio in alluminio anti corrosione • Include 2 portaborracce e attacco sella FINITURA • Attacco sella – nero anodizzato • Portaborracce – nero PESO • 191g

• Utilizza un sistema ad expander interno con passaggio cavi interno. • Leve di design ergonomico • Disegno specifi co per leva destra e sinistra • Compatibile con ganasce freno a pivot singolo e doppio MISURE • Compatibile con manubri con diametro da Ø24mm FINITURA • Nero anodizzato • Grafi ca laserata PESO • 91 g (paio)

VisionTech DragOn brake cable set included with all Vision brake lever sets

€ 99,00 front € 99,00 rear TRIMAX AERO CALIPER

W NE

€ 19,90 TRIMAX HIGH GRIP • Water bottle cage with greater stiffness to prevent unintentional bottle release • Reinforced ribs and sturdy bottom shelf for positive engagement and release • Universal bottle fitment • Fiber-reinforced nylon body • 20mm of adjustability for ideal mounting position FINISH • Cage options - black, green • Neutral graphics WEIGHT • 48 grams

• Porta borraccia studiato con le migliori tecnologie per prevenire la fuori uscita della borraccia • Rinforzato e studiato nel design per renderlo di facile accessibilità ed estrazione della borraccia • Standard universale di borraccia • Fibra in nylon rinforzata • Possibilità di aggiustamento fino a 20mm FINITURA • Nero PESO • 48g

• Ratcheting quick release lever • Extremely rigid, compact dual pivot design, equipped with thrust bearings • Stainless main pivot bolts • Stainless cable attachment hardware • Adjustable spring tension • Orbital pad adjustment • Chromoly hardware • New brake pad compound SIZES • Reach - 40-50mm • Rim capacity - 18-28mm FINISH • Anodized black • White graphics WEIGHT • 384 grams (pair)

• Cricchetto leva di sgancio rapido • sistema “Dual pivot” con doppio perno in acciaio dotato di cuscinetti assiali • Bulloni perno principale in acciao inox • Fermacavo in acciaio • Tensione della molla regolabile • Regolazione pattini orbitale • Viteria in Acciao CR-MO • Nuova mescola dei pattini dei freni MISURE • Reach - 40-50mm • Compatibile con cerchi da 26-28mm FINITURA • anodizzato nero • Grafi ca bianca PESO • 384 g (coppia)

€ 599,00

€ 549,00

TRIMAX 35

TRIMAX 30 CLINCHER

CLINCHER

• Alloy 30mm section tubeless ready/clincher rim • Interspoke milling R06 system • Silver anodized CNC braking surface • 6 sealed cartridge bearings (2 F+4 R) mounted on a 17mm hub axle diameter • Aero bladed spokes • ABS self-locking nipples • Artisan built, entirely by hand SIZES • Aluminum freehub body for Shimano 10-11sp or Campagnolo 9-10-11sp • Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 2 drive side and 7 radial non drive side (2:1 ratio) FINISH • Rims – sand-blasted black anodized • Front & rear hubs – black anodized • Spokes – black • Color graphics options - red, gray WEIGHT • 1,580 g / pair (w/o QR)

• Cerchio alluminio da 30mm per copertoncino e tubeless ready • Fresature di alleggerimento – sistema R06 • Pista frenante silver anodizzata CNC • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93 e nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):16 radiali ruota anteriore; 21 ruota posteriore di cui 14 incrociati x2 lato destro e 7 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – alluminio nero anodizzato • Raggi – neri PESO • 1580g

• Cerchio alluminio da 35mm per copertoncino • Fresature di alleggerimento – sistema R06 • Pista frenante nera anodizzata CNC ultra resistente • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR60, nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):16 radiali ruota anteriore; 21 ruota posteriore di cui 14 incrociati x2 lato destro e 7 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – alluminio nero anodizzato • Raggi – neri PESO • 1630g

• Alloy 35mm section clincher rim • Interspoke milling R06 system • Extra light P. R.A. hubs for DP spokes • Black anodized CNC braking surface • 6 sealed cartridge bearings (2 F+4 R) mounted on a 17mm hub axle diameter • Aero bladed spokes • ABS self-locking nipples • Artisan built, entirely by hand • Includes alloy QR-60 and rim tape SIZES • Aluminum freehub body for Shimano 10-11sp or Campagnolo 10-11sp • Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 2 drive side and 7 radial non drive side (2:1 ratio) FINISH • Rims – sand-blasted black anodized • Front & rear hubs – black anodized • Spokes – black • Color graphics options – gray WEIGHT • 1,630 g / pair (w/o QR)

Φ634

24.3

24.8 17.5

24.8 VT-872/Disc

VT-880-v2 暫不用

26.1 TX-920/915/918

VT-840CH-NEW

WH-VT-335 WH-VT-635

17 22

VT-880CH

21.5

18.9

22.1

23.7

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

31 AM-960

QR-65

QR-65 27 31

€ 549,00

€ 749,00 W

TRIMAX 30 KB

TRIMAX 30 SL DISC CLINCHER

CLINCHER

• Alloy 28mm section clincher rim • Interspoke milling R06 system • CNC machined aluminum hubs – ISO and CL interface • Black anodized CNC braking surface • 6 sealed cartridge bearings (2F+4 R), 135mm O.L.D. rear • Aero bladed J-bend spokes • ABS self-locking nipples • Artisan built, entirely by hand • Includes QR-68/69 TA9/10mm, rim tape SIZES • Aluminum cassette for Shimano 9-10-11 sp • Spokes (F/R): 24 (12+12) front, cross 2 (L&R) ; 28 rear (14+14), cross2 (R)+cross 2(L) FINISH • Rims – sand-blasted black anodized • Front & rear hubs – black anodized • Color graphics options - gray WEIGHT • 1,590 g / pair (w/o QR) • Options for (front) QR, QR-9, 12-TA 15-TA, and (rear) QR, QR-10, TA-12 or X12

• Cerchio alluminio da 28mm per copertoncino • Fresature di alleggerimento – sistema R06 • Pista frenante nera anodizzata CNC • 6 cuscinetti a cartuccia (2 ant. + 4 post); • Raggi piatti aerodinamici J-bend • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR68/69, TA9/10mm e nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):24 (12+12) radiali ruota anteriore; 28 (14+14) ruota posteriore FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – alluminio nero anodizzato • Raggi – neri PESO • 1590g • Opzioni per ruota anteriore QR, QR-9, 12-TA, 15TA • Opzioni per ruota posteriore QR, QR-10, TA-12 or X12

81 24.3

Φ634

TX-920/915/918

VT-840CH-NEW

21.5 16

26.1

Φ634 30

VT-880-v2 暫不用

24.8

TX-920/915/918 VT-840CH-NEW

17 VT-880CH 22.1 VT-621 CSI

26.1

VT-880-v2 暫不用

VT-872/Disc

17.5 27 27

18.9 VT-872/Disc 23.7

17 VT-880-v2 暫不用 21.6

VT-840CH-NEW 31

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

AM-960

21.5 26.1 TX-920/915/918

23.7

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

25 25

18.9

27 31 AM-960

18.9

22.1

23.7

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

27 27 31 31 AM-960

17 22.1

24.8 17.5

VT-880CH

VT-872/Disc 24.3

Φ634

VT-880CH

24.8

21.5

17.5

24.3

24.8

• Cerchio alluminio da 30mm per copertoncino e tubeless ready • Fresature di alleggerimento – sistema R06 • Pista frenante nera anodizzata CNC ultra resistente • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 6 cuscinetti a cartuccia (2 ant. + 4 post); cuscinetti a contatto angolare per il mozzo posteriore; • Raggi piatti aerodinamici con tecnologia 2:1 per la ruota posteriore • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR93, nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):16 radiali ruota anteriore; 21 ruota posteriore di cui 14 incrociati x2 lato destro e 7 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – alluminio nero anodizzato • Raggi – neri PESO • 1495g

• Alloy 30mm section tubeless ready/clincher rim • Interspoke milling R06 system • New P.R.A. hubs for DP spokes • 6 sealed cartridge bearings (2 F+4 R) • Resistant Black anodized CNC braking surface • Angular contact bearings on rear hub • 17mm axle diameter • Aero bladed spokes • ABS self-locking nipples • Artisan built, entirely by hand • Includes alloy QR-65 and rim tape SIZES • Aluminum freehub body for Shimano 10-11sp or Campagnolo 9-10-11sp • Spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 3 drive side and 7 radial non drive side (2:1 ratio) FINISH • Rims – PEO hard coating • Front & rear hubs – black anodized • Spokes – black WEIGHT • 1,495 g / pair (w/o QR)

27 31

QR-65 QR-65

27 31

€ 299,00

Redefining value and performance, the Vision Team series can be found on bikes of all levels. When robustness and cost-effectiveness is needed, Vision Team has the answer.

TEAM 35 CLINCHER • Alloy 35mm section clincher rim • CNC braking surface • CNC machined aluminum hubs • 4 sealed cartridge bearings • Aero bladed spokes • Artisan built, entirely by hand • Includes QR and rim tape SIZES • Steel freehub body for Shimano 10-11sp • Flat spokes (F/R): 16 radial front wheel; 21 rear wheel, 14 cross 2 drive side and 6 radial non drive side (2:1 ratio) FINISH • Rims – sandblasted black anodized • Front & rear hubs – black anodized • Spokes – black • Color graphics options - gray WEIGHT • 1,730 g / pair (w/o QR)

• Cerchio alluminio da 35mm per copertoncino • Pista frenante nera anodizzata CNC ultra resistente • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 4 cuscinetti a cartuccia • Raggi piatti aerodinamici • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi, nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):16 radiali ruota anteriore; 21 ruota posteriore di cui 14 incrociati x2 lato destro e 7 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – nero anodizzato • Raggi – neri PESO • 1730g senza sganci rapidi

€ 169,00 TEAM MINI TT CLIP-ON • Butted alloy extensions • New refi ned aero CFD design • UCI compliant 3:1 bridge • one size, 6 position ergonomic angular arm rests SIZES • 170mm extensions • For use with Ø31.8mm FINISH • Anodized Black fi nish • Color graphics WEIGHT • 471 g

Vision's next generation, UCI-compliant Mini TT clip-on with aero bridge.

17 22 WH-VT-335 WH-VT-635

La nuova generazione Vision, Mini TT clip-on con ponte aero, che rispetta le norme UCI. • Estensione in lega di alluminio • Nuovo design aerodinamico ridefi nito • Il ponte rispetta le norme UCI 3:1 • Una misura, 6 posizioni ergonomiche di poggiagomiti. MISURE • Estensione 170mm • Per l'uso con manubri di diametro Ø31.8mm FINITURA • Finitura nero anodizzato • Grafi che colorate PESO • 471 g

€ 249,00

TEAM 30

TEAM 30 SL DISC CLINCHER

CLINCHER

• Alloy 30mm section clincher rim • CNC machined aluminum hubs • 4 sealed chromoly cartridge bearings • Aero bladed J-bend spokes • Artisan built, entirely by hand • Includes QR and spoke protector SIZES • Steel for Shimano 10-11sp freehub • Flat spokes (F/R): 24 front wheel cross 3; 24 rear wheel cross 3. FINISH • Color graphics options - grey WEIGHT • 2,100 grams / pair (w/o QR)

• Cerchio alluminio da 30mm per copertoncino • Pista frenante nera anodizzata CNC • 4 cuscinetti a cartuccia • Raggi piatti aerodinamici J-bend • Montate interamente a mano • Include sganci rapidi con leva in alluminio QR68/69, TA9/10mm e nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):24 (12+12) ruota anteriore; 24 (12+12) ruota posteriore FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – alluminio nero anodizzato • Raggi – neri PESO • 2100g • Opzioni per ruota anteriore QR, QR-9, 12-TA, 15TA • Opzioni per ruota posteriore QR, QR-10, TA-12 or X12

• Cerchio alluminio da 30mm per copertoncino • Pista frenante nera anodizzata CNC ultra resistente • Mozzi ultraleggeri con sistema PRA di regolazione del precarico cuscinetti; • 4 cuscinetti a cartuccia • Raggi piatti aerodinamici • Speciali nippli ABS autobloccanti • Montate interamente a mano • Include sganci rapidi, nastro paranipples MISURE • Corpo cassetta in alluminio, compatibile Shimano 10-11 o Campagnolo 10-11 velocità • Raggi (A/P):18 radiali ruota anteriore; 24 ruota posteriore di cui 16 incrociati x2 lato destro e 8 radiali lato sinistro (sistema 2:1) FINITURE • Cerchio – sabbiato e anodizzato nero • Mozzo anteriore e posteriore – nero anodizzato • Raggi – neri PESO • 1920g senza sganci rapidi

• Alloy 30mm section clincher rim • CNC braking surface • CNC machined aluminum hubs • 4 Sealed cartridge bearings • Aero bladed J-bend spokes • Artisan built, entirely by hand • Includes QR and rim tape SIZES • Steel freehub body for Shimano 10-11sp • Flat spokes (F/R): 18 radial front wheel; 24 rear wheel, 16 cross 3 drive side and 8 radial non drive side (2:1 ratio) FINISH • Rims – sandblasted black anodized • Front & rear hubs – black anodized • Spokes – black WEIGHT • 1,920 g / pair (w/o QR)

VT-880-v2 暫不用

26.1

TX-920/915/918

VT-840CH-NEW

18.9

22.1

23.7

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

27 31

18.9

23.7

21.6

VT-621 CSI

VT-301_VT-301/DB_603-NEW

VT-604/DB-NEW

AM-960

27 31 AM-960

17 22.1

25 TX-920/915/918 VT-840CH-NEW

VT-880-v2 暫不用

26.1

21.5

17.5 VT-872/Disc

VT-872/Disc

40 Φ634

24.8

21.5

17.5

VT-880CH

AVAILABLE ALSO WITH SILVER BRAKING SURFACE

24.8 VT-880CH

24.8

24.3

Φ634

24.3

27 25

QR-60

27 31

W NE € 279,00

TRACK 1X BB386EVO

VISION PRODUCTS Vision offers a selection of aerodynamic components that are both unique enough to stand on their own and versatile enough to stand to work with all our model families. “Non-Series” components are often the lightest, the fastest, or the strongest. They are design for the enthusiast who knows exactly what they expect from their bicycle and components.

• A revolution in track cranks with ultra-stiff 30mm spindle, dish spider, and rigid-aero arms. • Solid forged alloy 6061 • Forged 7050 30mm spindle SIZES • Length - 165mm, 167.5mm, 170mm, 172.5mm, 175mm • BCD - 144mm • 53T, 52T, 51T, 50T, 49T, 48T, 47T, 46T, 45T FINISH • Polished anodized black • Laser graphics CRANK WEIGHT • 818 grams

• Pedivella pista rivoluzionaria dotata di perno in alluminio 30mm per garantire peso e rigidità al vertice • Design dell’ intera pedivella creato per ottimizzarne l’ aerodinamica, il peso e la rigidità • Allumino 6061 forgiato • Alllumino 7050 forgiato per il perno MISURE • Lunghezza – 165mm, 167.5mm, 170mm, 172.5mm, 175mm • BCD – 144mm • 53T, 52T, 51T, 50T, 49T, 48T, 47T, 46T, 45T FINITURE • Nero anodizzato lucido • Grafica laserata PESO • 818g

€ 75,00 VISION WHEEL BAG • Durable nylon and heavy duty zips • Includes reinforced pads to prevent axle protruding • Internal pocket for QR and accessories SIZES • Holds 2 road wheels WEIGHT • 857 grams • Nylon e cerniere di alta qualità • Rinforzi centrali anti foratura • Tasca interna per accessori SIZES • Spazio per 2 ruote da strada WEIGHT • 857 grams

EUROPE COUNTRY

USA and CANADA TEL

COMPANY WEBSITE

USA

COUNTRY

Bicycle Technologies International (BTI) Info@bti-usa.com

COMPANY NAME

E-MAIL

+1.800.558.8324

http://www.bti-usa.com

USA

Quality Bicycle Products (QBP)

Sales@qbp.com

+1.800.346.0004

http://qbp.com

USA

Hawley, LLC

Sales@hawleyusa.com

+1.803.359.3492

http://www.hawleyusa.com

USA

Cyclone Bicycle Supply

Info@cyclonebicycle.com

+1.503.226.0696

http://cyclonebicycle.com

USA

J&B Importers, Inc.

Info@jbimporters.com

+1.800.666.5000

http://www.jbi.bike/web/index.php

USA

Olympic Supply Company

info@osco.bike

+1.414.461.8380

http://www.osco.bike/

USA

KHS, Inc.

Info@khsbicycles.com

+1.800.347.7854

http://khsbicycles.com/e_resources.htm

CANADA

Orange Sport Supply, Inc.

Info@orangesportsupply.com

+1.877.990.5554

http://www.orangesportsupply.com

CANADA

Cycles Lambert

Info@cycleslambert.com

+1.418.835.1685

http://www.cycleslambert.com/default.aspx

SOUTH AMERICA - AUSTRALIA - NEW ZEALAND COUNTRY

COMPANY NAME

E-MAIL

TEL

COMPANY WEBSITE

COMPANY NAME

E-MAIL

AUSTRIA

KALNAI sports international gmbH

TEL

ed@kalnai.at

0043-(0)5234325

BENELUX

*CODAGEX

Info@codagex.be

0032 14347474

BULGARIA

MAXCOM LTD.

Aftermarket@sprintmaxcom.com

00359 32600897

CZECH REP.

*DEMA SENICA A.S.

Sport@dema.sk

00421 346945111

CROATIA

KEINDL SPORT

Info@keindl-sport.com

00385 13708323

CYPRUS

A & P ANDREOU BROTHERS LTD

mariap@andreou.com

00357 – 24811031

DENMARK

*BJARNE, EGEDESØ A/S

Info@bikersbest.dk

0045 63168001

FINLAND

*BJARNE, EGEDESØ A/S

Info@bikersbest.dk

0045 63168001

FRANCE

*ESM, SPORT

Info@esm-sport.com

0033 0479843680

GERMANY

*MERIDA & CENTURION GERMANY GMBH

Vertrieb@merida-centurion.com

0049 07159 9459-30

GERMANY

*VAN BOKHOVEN

Info@bokhoven.de

0049-7517696330

GREECE

RACING CYCLES LTD

Sales@racingcycles.eu

0035-722210700

GREECE

A.TSERPE & SIA EE

Othios@gmail.com

0030 210 9913510

ITALY

*CICLO PROMO COMPONENTS S.P.A.

Info@ciclopromo.com

0039-04231996363

MALTA

MAGRI CYCLES & SPARES

Magricyc@nextgen.net.mt

00356-21414399

NORWAY

*BJARNE EGEDESØ A/S

Info@bikersbest.dk

0045 63168001

POLAND

*DEMA SENICA A.S.

Sport@dema.sk

00421-346945111

PORTUGAL

CICLO COIMBROES

geral@ciclocoimbroes.com

00351 - 223794461

RUSSIA

VELOMARKET CSKA

Sergey@velomarket-cska.ru

007-4956132938

SLOVAKIA

*DEMA SENICA A.S.

Sport@dema.sk

00421-346945111

SLOVENIA

*VEB COMPANY

Veb-company@siol.net

0038-614303922

SPAIN

*BHBIKES EUROPE, S.L.

Alfonso@bhsa.es

0034-945135202

SWEDEN

ODEX

info@odex.dk

+45 70 20 75 79

SWEDEN

*BJARNE EGEDESØ A/S

Info@bikersbest.dk

0045 63168001

SWISS

BELIMPORT

daniele@belimport.ch

+41 91 260 35 15

U.K. & IRELAND

SOLENT

Sales@windwave.co.uk

0044-2392521912

ASIA COUNTRY

COMPANY NAME

E-MAIL

TEL

COMPANY WEBSITE

ASIA

SHENYANG BICYCLE INTERNATIONAL CO., LTD. fsaservice@sycycles.com

00886-6-2705258

http://www.sycycles.com/home.asp

TAIWAN

SHENYANG BICYCLE INTERNATIONAL CO., LTD. twsales@sycycles.com

00886-6-2705258

http://www.sycycles.com/home.asp

CHINA

SHINGSHENYANG BICYCLE CO., LTD.

info@ssybike.cn

0086-755-29822344

http://www.sycycles.com/cn/home.asp

HONG KONG

Location world-wide Trading Limited

info@locationsports.com

852-35759577

http://www.locationsports.com/

THAILAND

LA BICYCLE (THAILAND) CO., LTD.

marketing@la-bicycle.com

0066-2-819-4488

http://www.la-bicycle.com

INDONESIA

PT.TERANG DUNIA INTERNUSA

unitedbike@cbn.net.id

0062-21-6300-555

http://www.unitedbike.com/id/index.php

INDONESIA

PT. TOPINDO BIKE

info@technobike.com

0062-21-7222-873

http://www.technobike.com/

IRAN

ORCHID MEHR

Info@orchid.ir

0098 55390303 21

http://www.orchid-co.com

ISRAEL

D. Z. Systems Ltd

tzahi@dzsystems.co.il

0097-289188983

JAPAN

FUTABA

Zac_r@e-ftb.co.jp

0081-52-5048345

JAPAN

INTER MAX CO.,LTD

Info@intermax.co.jp

0081 55 252-7333

catherine@cappa.com.sg

ARGENTINA

Broni S.A

info@fullspeedahead.com.ar

+54.11.4283.6000

http://fullspeedahead.com.ar

AUSTRALIA

Cassons Pty Ltd

enquires@cassons.com.au

+61.2.882.1900

http://www.cassons.com.au/

SINGAPORE

CAPPA TRADING PTE LTD.

SINGAPORE

HIAP GUAN METAL INDUSTRIES (PTE) LTD. hgmil@singnet.com.sg

0065-68415151

0065-6456-4584

BRAZIL

ITALBIKE imp. Exp. Com. Ltda

info@italbike.com.br

+55.2.1325.69001

http://www.italbike.com.br

CHILE

Oxford S.A.

vheresmann@oxford.cl

+56.2.246.3000

http://www.oxford.cl

SINGAPORE

ELITE BICYCLE ASIA PTE LTD.

info@elitebicyclesasia.com.sg

0065-6224 2577

http://www.elitebicyclesasia.com.sg/

MALAYSIA

SEN AIK TRADING SDN BHD

yeann@senaik.com

0060-3-33586650

http://www.senaik.com/

PHILIPPINES

YKK TRADING

info@ykkbikes.com

0063-32-255-8853

http://www.ykkbikes.com/

VIETNAM

BIKE LIFE

COLUMBIA

Disandina S.A.

componentes@disandina.com

+57.4.444.2404

http://www.disandina.com

DOMINICAN REPUBLIC

Bici Centro

arturo@bicicentro.com.do

8095334404,00

http://www.bicicentro.com.do/newweb

ECUADOR

Base Extreme

info@baseextreme.com.ec

+593.7.281.4686

http://www.baseextreme.com.ec/index.aspx

EL SALVADOR

Impornet / Probikesvv

info@probikesv.com

50322660759,00

http://www.probikesv.com

GUATEMALA

Impornet / Probikes by Jose

info@donde-jose.com

50223692009,00

http://donde-jose.com

MEXICO

Windsor Sport Group

contacto@windsorsportsgroup.com

528000623773,00

http://www.windsorsportsgroup.com

NEW ZEALAND

Wide Open Distributors

sales@wideopen.co.nz

+64.7.345.3280

http://www.wideopen.co.nz

PERU

DISARVA ASOCIADOS S.R.L.

cesarbautista@disarva.com

+51.1.332.0533

http://www.disarva.com

info@bikelife.com.vn

0084-8-5412 4217

http://www.bikelife.com.vn/

SOUTH KOREA SANBADA

sanbadasports@gmail.com

0082-10-99282959

http://sanbadasports.co.kr/front/

TURKEY

ACCELL BISIKLET SAN VE TIC AS

aftermarket@accellbisiklet.com.tr 9,02362E+11

TURKEY

ACCELL BISIKLET SAN VE TIC AS

aftermarket@accellbisiklet.com.tr

00902362130045

I.P.

FULL SPEED AHEAD USA 12212 CYRUS WAY MUKILTEO, WA 98275-5702 PH. 1 425 488 8653 FAX 1 425 489 1083

FULL SPEED AHEAD EUROPE VIA DEL LAVORO, 56 20874 BUSNAGO, (MB), ITALY PH. +39 039 688 52 65 FAX +39 039 682 33 36

For further information please visit our website www.fullspeedahead.com. FSA reserves the rights to change items and prices without prior notice. Per un approfondimento dellâ&#x20AC;&#x2122;intera gamma consultate il nostro sito www.fullspeedahead.com. FSA si riserva il diritto di modificare prezzi e prodotti senza darne preavviso.