QUICK INSTALLATION GUIDE
1
2
2-a
2-a
3 CN6 or CN65
QUICK INSTALLATION GUIDE
Installation process should only be performed by an authorized installer. Please follow all Safety Instructions provided by the AC manufacturer manuals.
1. Product description (Figure 1)
The device is an external module capable of connecting Air Conditioning units into your WiFi network to provide global connectivity and remote control applications through a friendly user interface. Packaging content: • Device
• Quick start guide
• Specific cable
• Label
2. Device location Device installed inside the AC unit or hidden (Figure 2-a)
• The indication LED and the button are not going to be accessible by the user. • If there is not enough space for installation inside the AC unit, the following actions can be performed: o If it is due to water pipes, change the side of the AC where they are connected to get more space inside the AC unit. o Otherwise the support surface can be removed.
Device installed outside the AC unit (Figure 2-b) • The device can be fixed both: using screws of double side tape. • The cable lid has several options to direct the cables to the desired direction.
3. Device connection (Figure 3)
1. Unplug the Air Conditioner (AC) unit from mains. 2. Access to the main Printed Circuit Board. 3. Locate the socket connector indicated in Figure 3. 4. Select a location for the device. 5. Connect the A-end (the long one) of the supplied cable to the Air Conditioner specific connector and the B-end (the short one) to the device connector. * 6. Close the Air Conditioner unit. 7. Plug the AC to the power supply line. If connection with the Air Conditioner has been successful, device LED will start blinking Green and then will change to steady Green. 8. For more information visit: https://www.fujitsugeneral.com.au/anywair
4. Configuration
Follow the instructions below for Wi-Fi configuration: Download the myanywAir application from Google Play or App Store. Visit the wireless settings section of your wireless device (smartphone or tablet) and connect to the network generated by your device (DEVICE_xxxxxx).
3
QUICK INSTALLATION GUIDE Open the app and click on the add device Button located in the left button side of the main screen. Once the LED of the device is steady green, click the Start button of the app. Select “Automatic”. Select the wireless network the device will be connected to. Introduce the wireless network password and press connect. The device will go through a led blinking process and it will finish with the LED off. If this is not the case please complete the process again. If problem persist, contact our support team. For a more detailed configuration guide please visit: https://www.fujitsugeneral.com.au/anywair Wi-FI specifications
Wireless LAN-compatible standard
IEEE802.11b/g/n
Frequency bands
2.4GHz (in the U.S. or Canada: 1ch~11ch) (in the other Regions: 1ch~13ch)
Maximum radio-frequency power
21,5 dBm
Wireless LAN security
Open WEP WPA WPA2 WPS push-button
5. Device registration
1. Download the App from Google Play or the App Store and follow instructions. 2. Create an account (in case you don’t have it yet). 3. Visit the settings/device/ section and click on add device. 4. Introduce the registration code (25-digit code on the label).
4
QUICK INSTALLATION GUIDE WARRANTY Certain legislation, including the Australian Consumer Law (ACL), may imply warranties or conditions or impose guarantees or obligations on Fujitsu which cannot be excluded, restricted or modified or cannot be excluded, restricted or modified except to a limited extent (Owner’s Statutory Rights). THE RIGHTS GIVEN BY THIS 2 YEAR WARRANTY ARE IN ADDITION TO ANY RIGHTS AND REMEDIES THAT THE OWNER MAY HAVE UNDER THE AUSTRALIAN CONSUMER LAW AND OTHER LAWS. THIS WARRANTY REPLACES ALL OTHER WARRANTIES PROVIDED WITH THE AIR CONDITIONING PRODUCT. The Wifi Adaptor product listed on the back of this manual is warranted by Fujitsu General (AUST.) Pty Limited (ACN 001 229 554) against defects in design, materials and workmanship for a period of 2 years from the date the adaptor was commissioned by Fujitsu General (AUST.) Pty Limited or approved installer. Adaptor defects covered by this Warranty will be repaired or replaced at the discretion of Fujitsu General (AUST.) Pty Limited (subject to the owner’s rights under the ACL with respect to major failures) without cost to the Owner for replacement parts or equipment. The repair or replacement shall be performed during normal business hours by Fujitsu General (AUST.) Pty Limited or a repair agent authorised by Fujitsu General (AUST.) Pty Limited. If your Fujitsu General WiFi Adaptor is repaired or replaced under this Warranty, it will be warranted in accordance with the provisions of this Warranty for the remainder of the original warranty period or 6 months from the completion of the repair or replacement of the parts or air conditioner, whichever is the greater. Except where inconsistent with the Owner’s Statutory Rights and the rights given by this Warranty, all other warranties and all liability of Fujitsu General (AUST.) Pty Limited for any loss or damage direct and consequential is expressly excluded. To claim under this warranty Owner should contact Fujitsu General (AUST.) Pty Limited (www.fujitsugeneral.com.au) or their designated service agent. Alternatively, Owner can send a claim to Fujitsu General (AUST.) Pty Limited at the address on the back of this manual. Owner will be responsible for the following costs associated with making the warranty claim: • All costs associated with travel outside of the area normally serviced by Fujitsu General (AUST.) Pty Limited or any repair agent authorised by Fujitsu General (AUST.) Pty Limited; • Freight charges including insurance; and • All costs related to gaining access to unsafe (eg high) or restricted locations. The Owner will be liable for all costs incurred by Fujitsu if the problem is not covered by the provisions of this Warranty or the Owner’s Statutory Rights. This Warranty DOES NOT cover: a) Faults or substandard performance resulting from operation at conditions outside the operating conditions as specified in the Fujitsu General technical or sales literature applicable to the Wifi Adaptor. b) Faults or substandard performance resulting from misapplication of the Wifi Adaptor. c) Faults or substandard performance resulting from operation of the Wifi Adaptor when used for applications other than the climatic comfort of humans. d) Faults or substandard performance resulting from incorrect or poor installation. e) All costs related to gaining access when installed in unsafe (eg high) or restricted locations. f) Faults or substandard performance caused by any product or part other than supplied by Fujitsu General (AUST.) Pty Limited. g) Costs associated with travel outside of the area normally serviced by Fujitsu General (AUST.) Pty Limited or any repair agent authorised by Fujitsu General (AUST.) Pty Limited or freight charges including insurance. h) Faults or substandard performance caused to the WiFi Adaptor by faulty or incorrect external electrical wiring, incorrect power supply, voltage fluctuations, over voltage transients or electromagnetic interference not originating within the air conditioner.
5
QUICK INSTALLATION GUIDE i) Faults or substandard performance caused by vermin, blocked filters, misuse, storm, flood, fire, earthquake, negligence, vandalism, Acts of God, war, foreign matter entering the air conditioner (eg leaf matter, dirt and moisture) or any other outside agency. j) Faults caused by internet connectivity issues such as poor connections, internet drop outs or router issues. Where this Warranty does not apply, the Owner’s rights are limited to the Owner’s non-excludable Statutory Rights. Owner’s Responsibility Where our service personnel are unable to identify any fault in the product, Fujitsu General (AUST.) Pty Limited may require you to provide proof that the Wifi Adaptor is defective. Limitation of Owner’s Statutory Rights In respect of any goods supplied under the contract which are not acquired by a consumer, as that term is defined in the ACL, all liability of Fujitsu General (AUST.) Pty Limited for any loss or damage, direct and consequential, not covered by this Warranty is expressly excluded. In respect of any goods supplied under the contract which are acquired by a consumer, but are not of a kind ordinarily acquired for personal, domestic or household use or consumption, unless the Owner establishes the following limitation of liability would not be fair and reasonable, the liability of Fujitsu General (AUST.) Pty Limited for any defect of design, materials or workmanship will be limited to any of the following as determined by Fujitsu General (AUST.) Pty Limited: a) replacing the Wifi Adaptor or supplying an equivalent adaptor; b) repairing the Wifi Adaptor; c) paying the cost of replacing the Wifi Adaptor or supplying an equivalent adaptor; d) paying the cost of having the Wifi Adaptor repaired. Your statutory rights Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. To the extent our goods are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then we may limit our liability as we have done so above to repair or replacement of goods or the payment of the cost of repairing or replacing goods, or supplying services again or payment for the cost of supplying services again, in accordance with section 64A of the Australian Consumer Law. Personal Information Collection Notice To receive the benefit of this warranty, you will need to provide certain personal information such as your name and address to Fujitsu General (Aust) Pty Ltd and ABN 55 001 229 554. We collect this personal information for the purposes of commissioning a service agent to attend to your warranty issue. If you do not provide us with the relevant information, you will not be able to benefit from this warranty. We will handle all personal information provided to us in accordance with all applicable privacy laws. If you would like further details regarding how we handle your personal information or how you can access or correct this personal information, please review our privacy policy accessible here www.fujitsugeneral.com.au/help-centre/privacy-policy or contact us on the details provided below. Fujitsu General (Aust) Pty Ltd ABN 55 001 229 554 E. contact@fujitsugeneral.com.au T. 1300 822 201
6
QUICK INSTALLATION GUIDE CERTIFICATIONS FCC Interference Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of this device. Contains FCC ID: 2AC7Z-ESPWROOM32 RF Exposure Warning Notice: • • • Caution:
• •
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. To assure continued compliance, follow the attached installation instructions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter external antenna must be installed and operated keeping at least 20 cm (7 7/8 inch).
RSS-102, Issue 5 Device compliant with the standard: RSS-102, Issue 5 Safety Code 6: Health Canada’s Radiofrequency Exposure Guidelines IEC 62368-1:2014 (Second Edition) Report Number .............................. : E492753-A6003-CB-1 Ratings .................................... : 12Vdc / 60mA Summary of compliance with National Differences: AU,NZ, EU Group Differences, US,CA Radiocommunications (Electromagnetic Compatibility) Standard 2008, refer RadioMotive S.r.l. EN 55032:2015 + AC:2016 test report No. 17-4788062805.5.1.EMC dated 27 September 2017. Radiocommunications (Short Range Devices) Standard 2014, refer RadioMotive S.r.l. EN 300 328 v2.1.1 test report No. 17-4788062805.1.1.RAD dated 19 October 2017. Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard 2014, refer RadioMotive S.r.l. EN 62311:2008 V2.1.1 test report No. Rel17-4788062805.2.1.EMF dated 27 September 2017.
7
FUJITSU GENERAL AUSTRALIA - 1 Telopea Place, Eastern Creek NSW 2766 Ltd ABN 55 001 229 554 - a subsidiary of FUJITSU GENERAL LIMITED Document Review v.1.1
8
