FITTINGS SELECTION_5_1_book collection by furnital srl

collection book

FITTINGS SELECTION for _kitchens _living rooms _wardrobes _bathrooms

Recycled paper produced of 100 % recovered fibre. Recyclingpapier aus 100 % Altpapier. Manufactured without optical brightening agents andQUALITÄTSDATEN Hergestellt ohne Zusatz optischer Aufheller, ohne Chlorbleiche, hohe Weiße und Reinheit Weiße CIE ISO 11475: 110 % chlorine bleaching, high des whiteness thanks togute a special Weiße ISO 2470: 90 % durch eine besondere Aufbereitungstechnik Altpapiers. Hohe Opazität und Blattformation sowieprocess höchste Alterungsbeständigkeit. Hervorragende Volumen: 1,25 cm3/g converting for recovered fibre. 2 Maschinengängigkeit auf allen Verarbeitungsmaschinen für Anwendungen vom Kuvert Cobb 60: ≤30 g/m bis zum Geschäftsbericht. Auf Anfrage für Laser und Inkjet erhältlich. Feuchte rel. Offset: 45 % Feuchte rel. Preprint: 35%

Certificates: ISO 9001 and ISO 14001 100% recycled paper

FLÄCHENGEWICHT

100

120

135

150

170

DRUCK- UND VEREDELUNG 190

250

300

(g/m 2 ), ISO 536

Based on bioenergy and local sourcing

DICKE

100

113

125

148

165

≥ 91

≥ 93

≥ 95

≥ 96

≥ 97

≥ 98

160

185

210

235

300

360

160

190

160

(μm), ISO 534

OPAZITÄT (%), ISO 2471

RAUHEIT BENDTSEN (SS) (ml/min), DIN 53108

PREPRINT

März 2019

100 % Altpapier Für Laser und Inkjet Angenehm hohe Weiße Hohe Opazität und Reinheit Beste Laufeigenschaften Alterungsbeständigkeit DIN 6738: LDK 24-85 Basierend auf Bioenergie und lokaler Beschaffung Integrierte Deinking-Anlage Closed loop; keine Deponierun In Rolle und Format ZERTIFIKATE

FURNITAL

CONTENTS_ Company profile

_01. TECHNICAL HARDWARES _01.1 Hanging brackets _01.2 Levelers

316 16 35 12 R1

Ø16mm

+18mm 0mm

ZAMAK

100

809 20 C1 04 00

7200

537

400

809

Z1 M8 00

')(

"#)%

!"#

31-03-2020

3 .1.1

8 54

_01.3 Straighteners

_01.4 Invisible shelf brackets

_01.5 Push latches

_02. DECORATIVE HARDWARES _02.1 Sofa and cabinet legs

102

_02.2 Shelf brackets

110

_03. CABINET MECHANISMS _03.1 Thin flap opening mechanism with soft opening and closing

120

_03.2 Flap opening mechanism with soft opening and closing

126

_03.3 Flap opening mechanism with soft opening

132

_03.4 Flap opening mechanism for short, deep cabinet

138

_03.5 Hinges

144

_04. WARDROBE EQUIPMENT _04.1 Wardrobe lift

150

_04.2 Pull-out and fixed accessories

158

_05. KITCHEN EQUIPMENT _05.1 Stainless steel dish rack

168

_05.2 Waste bin

174

_05.3 Rubber mat

190

_06. ELECTRICAL PRODUCTS

FURNITAL

_06.1 Built in socket

196

_06.2 Lamps

202

COMPANY PROFILE

FURNITAL _spreading our passion for the furniture-making, by sharing only the best components Born in the heart of Brianza, where the tradition of “furniture making” and the knowledge of the wood industry turn into innovation, Furnital over the years evolved into a distinguished brand worldwide. Thanks to our belief in technology and innovation, our constant search for the best solutions, and the passion for our work, Furnital is now regularly supplying customers spread out in more than 50 countries around the globe.

Furnital’s mission is to provide mechanical solutions that are able to solve any kind of situation that can happen in the production of furniture, therefore making us a very valuable partner for both furniture manufacturers and furniture components distributors. We focus on products that, once installed on furniture, are often not even visible. Their function, however, is perfectly perceptible. Thanks to our solutions it is possible to create beautiful yet absolutely functional pieces of furniture. Our secret is the quality of the products and our attention to innovations. From the kitchen, to bedroom, from the living room, to the bathroom, Furnital offers solutions for the creation of furniture apt to all the environments in which we live. The ability to recognize trends also represents an important part of our efforts. We persistently develop fresh ideas, and we are constantly on the lookout for new products that are able to satisfy our customers’ needs even before they arise.

FURNITAL

COMPANY PROFILE

Furnital pays particular attention to the relationship with its partners: our range of products and services for furniture manufacturers, carpenters and specialized distributors is the result of a ceaseless exchange of opinions and experiences between experts in the field. The desire to find customized solutions that meet the demands of our customers is the driving force that moves us every day. Over the years, our meticulous attention to details has granted us countless partnerships with many Italian leading furniture components manufacturers, as well as furniture producers. This has helped to further improve our wide range of avant-garde products.

What distinguishes Furnital in the field is our attention to the products offered, which are 100% Made in Italy, and our attention to details, to the quality of the materials, and to design innovation. From the accessories to the mechanisms, from the sliding systems to the quality of fabrics and leathers, we guarantee that only top-notch products are selected and offered through our range. Because Made in Italy is not expressed just through elegant products, but also through competent know-how and reliable after-sales service, our knowledgeable staff is always ready to walk you through every products in detail, before purchasing and after applying it to your creations.

FURNITAL

_01 TECHNICAL HARDWARES

_01.1

HANGING BRACKETS

_01.1 Hanging brackets _01.2 Levelers _01.3 Straighteners _01.4 Invisible shelf brackets _01.5 Push latches

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

VISIBLE METAL HANGING BRACKETS FOR UPPER CABINET METAL HANGING BRACKET WITH DOWELS FOR UPPER CABINETS

ITEM

SPECIFICATIONS

BOX

CH020.006.002

Left

200

CH020.006.001

Right

200

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: Dimensions and material of the cabinet. Positioning of the bracket against top and back panels. Rigidity of the top panel. Presence, position and quantity of dowels, connection fittings and glue. Presence and thickness of the back panel, depth of the milling and dimensions of the hole in the back panel. Type, diameter and length of the screws used. If the bracket is only partially hooked onto the wall plate. Dynamic stress.

see steel hanging wall bars on pag. 17 CH023.001.008 CH023.001.009

_technical details

COVER

see cover carter on pag. 16

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

METAL HANGING BRACKET FOR SCREWS FOR UPPER CABINETS

ITEM

SPECIFICATIONS

BOX

CH020.006.004

Left

200

CH020.006.003

Right

200

see steel hanging wall bars on pag. 17 CH023.001.008 CH023.001.009

_technical details

screw Ø4

COVER

see cover carter on pag. 16

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

METAL HANGING BRACKET WITH DOWELS AND ANTI-DROP SYSTEM FOR UPPER CABINETS ITEM

SPECIFICATIONS

BOX

CH020.006.006

Left

200

CH020.006.005

Right

200

ANTI-DROP SYSTEM WITH

see steel hanging wall bars on pag. 17 CH023.005.003

_technical details

COVER

see cover carter on pag. 16

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

METAL HANGING BRACKET FOR SCREWS WITH ANTI-DROP SYSTEM FOR UPPER CABINETS ITEM

SPECIFICATIONS

BOX

CH020.006.008

Left

200

CH020.006.007

Right

200

ANTI-DROP SYSTEM WITH

see steel hanging wall bars on pag. 17 CH023.005.003

_technical details

screw Ø4

COVER

see cover carter on pag. 16

FURNITAL

Fe TECHNICAL HARDWARES | HANGING BRACKETS

6000 6000

200 200

1200 1200

METAL HANGING BRACKET WITH DOWELS FOR UPPER CABINETS 3

6000

200

1200

ITEM

SPECIFICATIONS

BOX

CH020.001.011

Left

200

CH020.001.012

Right

200

see steel hanging wall bars on pag. 17 CH023.001.008 CH023.001.009

528 807 00 AL MA 00 528 9 details807 00 AL MA 00 _technical 9

807 00 AL MA 00

AC 00 60 LS 873 874 875 890 ACAC 0001 6000 LSLS 873 874 875 890890 9

559

22 mm 528 22 mm 19 mm 9 19 mm

559

ACAC 0101 0020 LSLS 890 560-562 890 890 ACAC 0101 2040 LSLS 560-562 890

559

890 AC 01 40 LS

873

874

875

559

560-562

890 AC 890 9AC 9 890 AC 890 AC

00 01 01 01

60 00 20 40

569 569 570 570 571 571 571 571

801

801 LS LS526 526 LS LS

569 570 571 571

801 526

22 mm

COVER

3.1 198 3.1 198

01-05-2016 01-05-2016

M I N .1 5 M I N .1 8

ø1 0

M I N .1 5 M IM N I.1N5.1 8 M I N .1 8

10.5

RXM4

10.5

ø1 0 ø1 0

10.5

19 mm

01-05-2016

3.1

198

see cover carter on pag. 16

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

METAL HANGING BRACKET WITH DOWELS AND ANTI-DROP SYSTEM FOR UPPER CABINETS ITEM

SPECIFICATIONS

BOX

CH020.002.038

Left

200

CH020.002.037

Right

200

ANTI-DROP SYSTEM WITH

see steel hanging wall bars on pag. 17 CH023.005.003

_technical details

COVER

see cover carter on pag. 16

FURNITAL

801 00

00 52

N1 DX 01 SX 04 15 1 135 63 ACCESSORIES FOR 1 4 60 75

PS TECHNICAL HARDWARES | HANGING BRACKETS

12000

400

VISIBLE METAL HANGING BRACKETS

1200

PLASTIC CARTER FOR METAL HANGING BRACKETS 503

12000

400

1200

ITEM

SPECIFICATIONS

FINISHING

BOX

CH020.003.011

Left

White

400

CH020.003.004

Right

White

400

CH020.002.036

Left

Orion Grey

400

CH020.002.035

Right

Orion Grey

400

CH020.003.009

Left

Grey

400

CH020.003.002

Right

Grey

400

CH020.003.010

Left

Silver Grey

400

CH020.003.003

Right

Silver Grey

400

Brown Ral 8003

400

Right

Brown Ral 8003

400

Left

Black

400

CH020.003.0131 1 25 CH020.003.006 52

CH020.003.012

3.1 11

CH020.003.005

526

Left

Right

Black

01-05-2016

3.1

526

FURNITAL

400

TECHNICAL HARDWARES | HANGING BRACKETS

STEEL HANGING WALL BAR

C00 0060 60LS LS60 LS 890 AC 00

ITEM

CH023.001.008 7070 Kg Kg 70 Kg

LENGTH (mm)

BOX

800

628-629 628-629 628-629 www.camar.it/warning www.camar.it/warning www.camar.it/warning

FeFe

14400

400

1200

14400 14400

400400

1200 1200

ITEM

LENGTH (mm)

BOX

400

60 6.2

6.2

FURNITAL

20 10

1.8

20 10

60 9

CH023.001.009

1.8 1.8

ITEM

LENGTH (mm)

BOX

CH023.005.003

800

TECHNICAL HARDWARES | HANGING BRACKETS

VISIBLE PLASTIC HANGING BRACKETS FOR UPPER CABINET PLASTIC HANGING BRACKET WITH DOWELS FOR UPPER CABINETS

ITEM

SPECIFICATIONS

BOX

CH020.001.019

Left

200

CH020.001.020

Right

200

see steel hanging wall bars on pag. 21 CH023.001.008 CH023.001.009

_technical details

COVER

see cover carter on pag. 20

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

PLASTIC HANGING BRACKET FOR SCREWS FOR UPPER CABINETS

ITEM

SPECIFICATIONS

BOX

CH020.001.017

Left

200

CH020.001.018

Right

200

see steel hanging wall bars on pag. 21 CH023.001.008 CH023.001.009

_technical details

screw Ø4

COVER

see cover carter on pag. 20

FURNITAL

3.1

TECHNICAL HARDWARES | HANGING BRACKETS

Fe ACCESSORIES Fe FOR VISIBLE PLASTIC HANGING BRACKETS Fe Fe METAL CARTER FOR PLASTIC HANGING BRACKETS 14400 14400 1200 1200 400 14400 14400

43 17

1200 ITEM

SPECIFICATIONS

FINISHING

BOX

CH020.003.035

Left

Nickel Plated

400

CH020.003.036

Right

Nickel Plated

400

ITEM

SPECIFICATIONS

FINISHING

BOX

CH020.003.021

Left

White

400

CH020.003.022

Right

White

400

CH020.004.001

Left

Orion Grey

400

CH020.004.002

Right

Orion Grey

400

CH020.003.024

Left

Grey

400

CH020.003.030

Right

Grey

400

CH020.003.025

Left

Silver Grey

400

CH020.003.031

Right

Silver Grey

400

CH020.003.027

Left

Brown Ral 8003

400

CH020.003.033

Right

Brown Ral 8003

400

CH020.005.004

Left

Black

400

CH020.005.003

Right

Black

400

1200

400

CARTER FOR PLASTIC HANGING BRACKETS PS PLASTIC PS 12000 12000

400

12000 12000

400

17 26

1200

17 26

1200

17 26

1200

400

67 01-05-2016 01-05-2016

527 3.1

527 01-05-2016 01-05-2016

527 3.120 527

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

STEEL HANGING WALL BAR

C00 0060 60LS LS60 LS 890 AC 00

ITEM

7070 Kg Kg CH023.001.008 70 Kg

LENGTH (mm)

BOX

800

628-629 628-629 628-629 www.camar.it/warning www.camar.it/warning www.camar.it/warning

FeFe

14400

400

1200

14400 14400

400400

1200 1200

ITEM

LENGTH (mm)

BOX

400

60 6.2

FURNITAL

6.2

20 10

1.8

20 10

60 9

CH023.001.009

1.8 1.8

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED METAL HANGING BRACKETS FOR UPPER CABINETS CONCEALED HANGING BRACKET WITH DOWELS FOR UPPER CABINETS

CH023.001.008

ITEM

SPECIFICATIONS

DOWEL Ø (mm)

BOX

CH020.002.021

Left

100

CH020.002.022

Right

100

CH020.002.019

Left

100

CH020.002.020

Right

100

see steel hanging wall bars on pag. 30

COVER CAP

ITEM

SPECIFICATIONS

FINISHING

BOX

CH020.003.045

Universal

White

5000

CH099.008.004

Universal

Silver Grey

5000

CH020.003.046

Universal

Brown

5000

CH099.008.005

Universal

Nickel Plated

5000

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

_technical details

Dowel Ø (mm)

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED HANGING BRACKET WITH DOWELS AND ANTI-DROP SYSTEM FOR UPPER CABINETS ITEM

SPECIFICATIONS

DOWEL Ø (mm)

BOX

CH099.002.001

Left

100

CH099.002.002

Right

100

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: ANTI-DROP SYSTEM WITH

CH099.009.001

Dimensions and material of the cabinet. Positioning of the bracket against top and back panels. Rigidity of the top panel. Presence, position and quantity of dowels, connection fittings and glue. Presence and thickness of the back panel, depth of the milling and dimensions of the hole in the back panel. Type, diameter and length of the screws used. If the bracket is only partially hooked onto the wall plate. Dynamic stress.

see steel hanging wall bars on pag. 30

COVER CAP

ITEM

SPECIFICATIONS

FINISHING

BOX

CH099.008.001

Universal

White

400

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

_technical details

ANTI-DROP SYSTEM

FURNITAL

6 screws Ø3.5

3 screws Ø3.5

6 screws Ø3.5

3 screws Ø3.5

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED HANGING BRACKET WITH DOWELS AND ANTI-DROP SYSTEM FOR UPPER CABINETS

ANTI-DROP SYSTEM WITH

CH023.005.003

ITEM

SPECIFICATIONS

BOX

CH099.003.002

Left

100

CH099.003.001

Right

100

see steel hanging wall bars on pag. 30

COVER CAP

ITEM

SPECIFICATIONS

FINISHING

BOX

CH099.008.014

Universal

White

800

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

_technical details

ANTI-DROP SYSTEM

2 screws Ø3.5

ANTI-DROP SYSTEM

2 screws Ø3.5

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED HANGING BRACKET FOR UPPER CABINETS

ANTI-DROP SYSTEM WITH 15

CH023.010.001

200

see steel hanging wall on 80 pag. 893bars AS Z1 16 31

400

CH075.006.002

Left

100

CH075.006.001

Right

100

610-611

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: Fe Dimensions and material of the cabinet. Positioning of the bracket against top and 7200 400 back panels. Rigidity of the top panel. Presence, position and quantity of dowels, connection fittings and glue. Presence and thickness of the back panel, depth of the milling and dimensions of the hole in the back panel. Type, diameter and length of the screws used. If the bracket is only partially hooked onto the wall plate. Dynamic stress.

610-611

Fe 7200

200

23 13 N1 01 02 04 15 75

BOX

70 Kg

SPECIFICATIONS

70 Kg

893 AS Z1 80 15

810 00

ITEM

400

574

48000

800

400

01-05-2016

48000

800

503

COVER CAP

FINISHING

BOX

CH075.006.003

Universal

White

400

CH075.006.004

Universal

Nickel Plated

400

23 13

810 00 ABS 28

27 11 N2 01 02 04 15 75

SPECIFICATIONS

ITEM

ABS

400

57600

400

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

_technical details

MAX. 18

3 screw Ø3.5

FURNITAL

6 screw Ø3.5

TECHNICAL HARDWARES | HANGING BRACKETS

STEEL HANGING WALL BAR

ITEM

LENGTH (mm)

BOX

CH023.001.008

800

ITEM

LENGTH (mm)

BOX

CH099.009.001

400

ITEM

LENGTH (mm)

BOX

CH023.005.003

800

FURNITAL

70 Kg 70 Kg

TECHNICAL HARDWARES | HANGING BRACKETS 893 893 ASAS Z1Z1 8080 15 15 15

200 15

ITEM 200

Fe Fe

610-611 610-611

7200

7200 7200

200

400

(mm) 400 LENGTH 400

CH023.010.001

893 893 ASAS Z1Z1 8080 1616

893 AS Z1 80 16

70 Kg 70 Kg

70 Kg

200

610-611 610-611

610-611

200

BOX

200

Fe Fe

Fe7200 7200 7200

400

01-05-2016 01-05-2016

574 574

01-05-2016

574

FURNITAL

807 02 Z1 IN

70 Kg DX SX

614-615

TECHNICAL HARDWARES | HANGING BRACKETS

www.camar.it/warning

METAL HANGING BRACKETS FOR BASE CABINETS

+20mm 0mm

METAL HANGING BRACKET WITH DOWELS FOR BASE CABINETS

ITEM

SPECIFICATIONS

3000

100

800

BOX

CH075.001.001

Left

100

CH075.001.002

Right

100

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: Dimensions and material of the cabinet. Positioning of the bracket against top and back panels. Rigidity of the top panel. Presence, position and quantity of dowels, connection fittings and glue. Presence and thickness of the back panel, depth of the 70 897 milling AS Z1 XL and 90 dimensions of the hole in the back panel. Type, diameter and length of the screws used. If the bracket is only partially hooked onto the wall plate. Fe Dynamic stress. Kg

618-619

www.camar.it/warning

1500

400

120 48

6.2

M8x1

1.5

70 Kg

897 AS Z1 12 12

CH023.002.001 614-617

see cover carter on pag. 34 see mounting plates on pag. 35

www.camar.it/warning

ANTI-DROP SYSTEM WITH

1500

100

400

CH023.002.006 897 00 AL

583

120 48

120

M8x1

_technical details

6.2

9 1.5

01-05-2016

3.1

897 AS Z1 12 12 897 AM

581 583

581

807 00 807 00 807 00

00 55 31

534

810 00

38 24

543

535 535

807 00 P2 AP 00

529

807 00 AL MA 00

528

01-05-2016

3.1 32

269 FURNITAL

70 Kg

807 02 Z1 RV

616-617

TECHNICAL HARDWARES | HANGING BRACKETS

DX SX

www.camar.it/warning

+20mm 0mm

Fe 70 70 DOWELS FOR BASE CABINETS BUILT-IN METAL HANGING BRACKET WITH 807 807 02 02 Z1 Z1 RV RV KgKg

www.camar.it/warning www.camar.it/warning

DX DX SX SX

ITEM

SPECIFICATIONS

100

BOX

3D 3D3000

CH075.004.001

Left

CH075.004.002

Right

Fe Fe

800 +20 +20mm mm 00mm mm

100 100

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY:

3000 3000

100 100

800 800

theZ1screws used.70If the bracket is only partially hooked onto the wall plate. 897 AS XL 90 Dynamic stress. Kg

618-619

www.camar.it/warning

1500

400

120

6.2

M8x1

4 mm 9

614-617

www.camar.it/warning

1500

100

see cover carter on pag. 34 see mounting plates on pag. 35

400

CH023.002.006

897 00 AL

583

_technical details

70 Kg

CH023.002.001

897 AS Z1 12 12 80700 00 RV RV89 89 807 807 80700 00 RV RV00 00 807 80700 00 RV RV65 65

ANTI-DROP SYSTEM WITH

1.5

120 12

120

6.2

1.5

M8x1

01-05-2016

581

529

807 00 P2 AP 00

533 534

533

RV 00 RV 65 RV 89

807 00 807 00 807 00

583

581

897 AS Z1 12 12 897 AM

3.1

01-05-2016

3.1 FURNITAL

277 33

ACCESSORIES FOR METAL HANGING BRACKET FOR BASE CABINETS 4

PLASTIC CARTER FOR HANGING BRACKET

4800

807 00

N1 01 04 12 15 25 35 60 75

534

800

400

RV 00

ITEM

SPECIFICATIONS

FINISHING

BOX

CH075.003.004

Left

White

400

CH075.003.012

Right

White

400

CH075.001.014

Left

Orion Grey

400

CH075.001.013

Right

Orion Grey

400

CH075.003.001

Left

Grey

400

CH075.003.009

Right

Grey

400

CH075.003.003

Left

Silver Grey

400

CH075.003.011

Right

Silver Grey

400

CH075.003.008

Left

Brown Ral 8003

400

CH075.003.016

Right

Brown Ral 8003

400

CH075.001.009

Left

Black

400

CH075.001.010

Right

Black

400

CH075.001.011

Left

Nickel Plated

400

CH075.001.012

Right

Nickel Plated

400

4800 800 *for hanging bracket on pag. 32

01-05-2016

PS PSPLASTIC CARTER FOR BUILT-IN HANGING BRACKET 503

4800 4800

800 800

ITEM

SPECIFICATIONS

FINISHING

BOX

CH075.003.018

Universal

White

400

CH075.004.006

Universal

Orion Grey

400

CH075.003.019

Universal

Grey

400

CH075.004.005

Universal

Nickel Plated

400

400 400

*for built-in hanging bracket on pag. 33 4

807 00

4 4

N1 01 04 15 35 60 75

RV 65

84 84

3.1

TECHNICAL HARDWARES | HANGING BRACKETS

400

7200

800

9797

1717

503

PS PS

FURNITAL

897 AS Z1 XL 90 35

TECHNICAL HARDWARES | HANGING BRACKETS 4

22 Fe

MIN.18

60 MIN.18

MOUNTING PLATE 60X70 WITH ANTI-DROP SYSTEM MIN.10 MIN.10

ø10

www.camar.it/warning

10.5

ø10

10.5

618-619

97 AS Z1 89760 AS70Z1 60 70

1500

ITEM

400

CH023.002.001

LENGTH (mm)

BOX

200

3D 60

12 48

8 36

9 9

6.2

M8x1

7 52 6.2

6.2

120

82 1.5

2 8

70 Kg

897 AS Z1 12 12

614-617

www.camar.it/warning

MOUNTING PLATE 120X120 WITH ANTI-DROP 3DSYSTEM

ITEM

CH023.002.006

LENGTH (mm)

BOX

120

100

1500

100

400

897 00 AL

583

120 48

120

M8x1

6.2

1.5

01-05-2016

3.1

FURNITAL

581

TECHNICAL HARDWARES | HANGING BRACKETS

XL METAL HANGING BRACKETS FOR BASE CABINETS XL METAL HANGING BRACKET WITH DOWELS FOR BASE CABINETS

ITEM

SPECIFICATIONS

BOX

CH075.002.001

Left

CH075.002.002

Right

897 AS Z1 XL 12

618-619

www.camar.it/warning

1500

400

897 00 AL

70 Kg

897 AS Z1 XL 90

583

CH023.002.003 618-619

120

102

see cover carter on pag. 38 see mounting plates on pag. 39

6.2

ANTI-DROP SYSTEM WITH

120

M8x1

www.camar.it/warning

1.5

1500

400

70 Kg

897 AS Z1 XL 24

618-619

CH023.002.002 120

www.camar.it/warning

72 9

6.2

M8x1

1.5

_technical details

70 Kg

897 AS Z1 12 12

720

897 00 AL

583

614-617

www.camar.it/warning 240 12

43.2

120

M8x1

1500

400

6.2

100

1.5

897 00 AL

583 01-05-2016

3.1

580 120 48

120

M8x1

6.2

9 1.5

01-05-2016

3.1

581

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

BUILT-IN XL METAL HANGING BRACKET WITH DOWELS FOR BASE CABINETS

ITEM

SPECIFICATIONS

BOX

CH075.002.004

Left

CH075.002.003

Right

897 AS Z1 XL 12

618-619

www.camar.it/warning

1500

400

897 00 AL

70 Kg

897 AS Z1 XL 90

583

CH023.002.003 618-619

120

102

see cover carter on pag. 38 see mounting plates on pag. 39

6.2

ANTI-DROP SYSTEM WITH

120

M8x1

www.camar.it/warning

1.5

1500

400

70 Kg

897 AS Z1 XL 24

618-619

CH023.002.002 120

www.camar.it/warning

72 9

6.2

M8x1

1.5

_technical details

70 Kg

897 AS Z1 12 12

720

897 00 AL

583

614-617

www.camar.it/warning 240 12

43.2

120

M8x1

1500

400

6.2

100

1.5

897 00 AL

583 01-05-2016

3.1

580 120 48

120

M8x1

6.2

9 1.5

01-05-2016

3.1

FURNITAL

581

00 00

TECHNICAL HARDWARES | HANGING BRACKETS

3600 FOR BASE 400 200 FOR XL METAL HANGING BRACKETS 120 12

400

6000 6000

200200

800800

ITEM

SPECIFICATIONS

FINISHING

BOX

CH075.003.017

Universal

White

200

CH075.002.008

Universal

Orion Grey

200

CH075.003.020

Universal

Grey

CH075.002.007

Universal

Nickel Plated

6.2

3600

200

FeFe

PLASTIC CARTER FOR XL HANGING BRACKET

800

N1 01 04 15 35 ACCESSORIES 60 CABINETS 75

6000

200

M8x1

807 XL

200 200

120 120 12 12

N1 01 04 15 35 60 75

9 90 72

9 72

11 11

RV 00 9

6.2

807 XL 6.2

48 48

M8x1

12 12

3600

200

400

PLASTIC CARTER FOR BUILT-IN XL HANGING BRACKET

PSPS

3600 3600

400400

SPECIFICATIONS

FINISHING

BOX

CH075.002.005

Universal

White

200

CH075.005.001

Universal

Orion Grey

200

CH075.003.021

Universal

Grey

200

200200

ITEM

FURNITAL

897 AS Z1 XL 12

Kg TECHNICAL HARDWARES | HANGING BRACKETS

618-619

www.camar.it/warning

1500 1500

50 50 3D

400400

MOUNTING PLATE 120X120 XL WITH ANTI-DROP SYSTEM

897897 00 00 ALAL

9 9

1500

400

ITEM

LENGHT (mm)

BOX

CH023.002.003

120

897 00 AL

9 12

120

70 Kg70 Kg

583 11

120 12

618-619618-619

M8x1 120 M8x1

M8x1

SZ1Z1XL XL9090

583 583

6.2

6.2 6.2

120

618-619 9

1.5

70 897MOUNTING AS Z1PLATE XL120X90 24WITH ANTI-DROP 50 50 SYSTEM

1.5

www.camar.it/warning 9

Fe Fe 1.5

102 120

70 Kg

897 AS Z1 XL 90

102

www.camar.it/warning www.camar.it/warning

XL L 24 24

ITEM

LENGTH (mm)

CH023.002.002

www.camar.it/warning www.camar.it/warning

120

720

48 12

9 90

583

6.2 90 6.2 9 M8x1

6.2

1.5

897 00 AL

FeFe

M8x1

3D3D

M8x1

12 48

BOX

618-619 618-619 50

120

Fe 120

400

www.camar.it/warning 400

1500

7070 Kg Kg

618-619 400

15001500

720720 8

1.5

43.2

40 40

614-617

70 Kg

897897 00 00 ALAL 6.2

897 AS Z1 12 12

1.5

9 9

70 Kg70 Kg 3D

SZ1Z112121212

3.1

FURNITAL

120

M8x1

1.5

43.2

20 20

43.2

240 12

580

www.camar.it/warning 8

12 43.2 43.2

43.2 43.2

240

43.2 43.2

01-05-2016

614-617614-617

Fe 240

583 583

www.camar.it/warning www.camar.it/warning 43.2 43.2

43.2 43.2 12

+ 5 mm - 5 mm

TECHNICAL HARDWARES | HANGING BRACKETS

+20mm 0mm

HANGING BRACKETS FOR BOISERIE

3600

100

EXTERNAL FIXING HANGING BRACKETS FOR BOISERIE

CH021.001.001

CH021.001.002

ITEM

SPECIFICATIONS

BOX

CH021.001.001

Without spring

100

CH021.001.002

With spring

100

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: Material of the panel. How far is the load protrusion from the panel. Type, diameter and length of the screws used. Dynamic stress. 885 AL 00 80 LS

500

2032 14

50 .8 25 .4

25 .4

25.4 50.8

890 AC Z1 01 00

1450.8 2032

6 14

50.86

70 Kg

CH021.001.001

624-625

www.camar.it/warning

CH021.001.002 12000

100

8 mm

1000

CH021.001.003 102.5

6.3

25.5

6.6

8 mm

1.8

17.3 17.3 24

CH023.001.008

873

874

875

559

560-562

01-05-2016

568

see steel hanging wall bars on pag. 45

809 536-537

_technical details 814 64 Z1 VI 01

3.1 CH021.001.001

328

CH021.001.002

FURNITAL

330-331

814 64 Z0 04 10 70

814 64 Z0 04 10 814 64 Z0 04 10

TECHNICAL HARDWARES | HANGING BRACKETS

www.camar.it/warning

4 mm

www.camar.it/warning

4 mm

10 mm

4 mm

10 mm

EMBEDDED HANGING BRACKET FOR BOISERIE

+20mm 0mm50 +20mm 0mm

1800

500

1800

500

ITEM

SPECIFICATIONS

CH021.001.008

Without spring

10 mm

BOX

8145064 Z0 04 10

814 64 Z0 04 10

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: Material of the panel. HowZ0 far is04 the10 load protrusion from the panel. Type, diameter 814 64 and length of the screws used. Dynamic stress.

70 Kg

891 AS Z1 80 30

Fe 15

7200

200

400

see steel hanging wall bars on pag. 45 80

1.8

6.2

29.5

6.2

CH021.001.010

0 mm

20-06-2017

892 AC Z1

70 Kg

0 mm

626-627

Lmm

0 mm

www.camar.it/warning

Fe 1200

3600 L

2 mm

10 mm 3.1.1

x x

572

2 mm

10 mm

2 mm

10 mm

01-05-2016

x x

Ø 4 mm

x Øx4 mm

Ø 4 mm

50.8

17.2 17.2 23.9

891 891

8 6.7

1.8

25.5

8.4

6.2

_technical details

FURNITAL

814 35 P2 02 05 www.camar.it/warning TECHNICAL HARDWARES | HANGING BRACKETS

2 mm

8 mm

ABS

EMBEDDED HANGING BRACKET Ø35 FOR BOISERIE 500

6000

100

70 Kg

814 35 P2 02 05

With two adjustments

100

70 Kg

3D 0 mm 8 mm

ABS

2 mm

8 mm

3 mm

Fe 500

6000

9 1.8

0 mm

CH021.004.002

8 mm

0 mm

5 mm

_technical details

3 mm 01-05-2016

NO GAP

0 mm

0 mm 0 mm

3 mm

0 mm

Locking Device Verificare

5 mm

814 AC Z1 16 35 814 AC Z1 16 35

485-487

3.1

809

5 mm

After assembly, verify system has been activ

0 mm

809

+20mm 0mm 500

3 mm

6000

100

553

5 mm

dopo il mon attivazione del sistema

553

5 mm

536-537

After assembly, 320 that the anti-drop 3.1.1 verify system has been activated. Verificare dopo il montaggio l’avvenuta attivazione del sistema antisgancio.

FURNITAL 814 AC Z1 16 35

553

622-623

6000

100

21 6.2

Material of the panel. How far is the load protrusion from the panel. Type, diameter and length of the screws used. Dynamic stress. mm mm ABS mm mm

622-623

100

PREVIEW NEXT CATALOGUE 3.1

CH021.004.001

8 mm

814 AC Z1 16 35

BOX

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY:

4 2 mm

SPECIFICATIONS

70 Kg

814 35 P2 02 05 4

ITEM

4814 4AC AC Z1 Z1Z1 16 1616 35 3535 AC

622-623 622-623

622-623

TECHNICAL HARDWARES | HANGING BRACKETS

www.camar.it/warning

ABS

100 100

6000 6000

100

MEASURE (mm)

BOX

CH021.004.002

21 x 32

100

1616

9 9

6.2

9 1.8 1.8

1.8

4 4

18 18

6.2 6.2

500

ITEM

2121

6000

500 500

6000

STEEL HANGING WALL BAR

32 32

FeFe

3 mm

0 mm

5 mm

553 553

5 mm FURNITAL

01-05-2016 01-05-2016 01-05-2016

553 43

TECHNICAL HARDWARES | HANGING BRACKETS

SMALL HANGING BRACKET FOR BOISERIE

885 AL 00 80 LS

ITEM

SPECIFICATIONS

BOX

CH021.001.016

For screw

100

500

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY:

2032 14

50 .8 25 .4

25 .4

25.4 50.8

890 AC Z1 01 00

1450.8 2032

6 14

50.86

70 Kg

Material of the panel. How far is the load protrusion from the panel. Type, diameter and length of the screws used. Dynamic stress.

624-625

www.camar.it/warning

Fe 12000

100

1000

CH021.001.003 102.5

6.3

1.8

6.6

25.5

1.8

17.3 17.3 24

CH023.001.008 01-05-2016

568

see steel hanging wall bars on pag. 45 8 mm

_technical details

6 mm

FURNITAL

www.camar.it/warning

890 AC Z1 01 00

70 Kg

TECHNICAL HARDWARES | HANGING BRACKETS

624-625

www.camar.it/warning

ACCESSORIES FOR HANGING BRACKETS FOR BOISERIE Fe

100

STEEL HANGING WALL BAR

12000

100

ITEM

CH021.001.003

102.5 8

100

25.5

17.3 17.3 51

6 1.8

6.6

25.5

102

6.6

6.3

BOX

1.8

102.5 1.8

6.6

LENGTH (mm) 6

6.3

1.8

1000

17.3 17.3 24

51 01-05-2016

568

ITEM

LENGTH (mm)

BOX

CH023.001.008

800

70 Kg

891 AS Z1 80 30

01-05-2016

891 AS 891 Z1 80 AS30 Z1568 80 30

70 Kg

200

7200

400

ITEM 200

7200 200

7200 400

CH021.001.010

1.8

13 13

29.5

11 1.8

6.2

13 15

6.2

54 15 54

11 8

15 13

100

29.5

6.2

80 8

6.2

80 6.2

BOX

1.8

29.5

6.2

LENGTH (mm) 400 11

20-06-2017 20-06-2017

892 AC Z1 Z1 AC Z1 892 AC 892

70 Kg

Lmm

FURNITAL

Lmm

70 Kg

20-06-2017

626-627 626-627

626-627

www.camar.it/warning

www.camar.it/warning www.camar.it/warning

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED HANGING BRACKETS EMBEDDED IN LATERAL PANEL CONCEALED HANGING BRACKET 12MM EMBEDDED IN LATERAL PANEL

ITEM

SPECIFICATIONS

BOX

CH022.001.006

Left

CH022.001.005

Right

ATTENTION - THE LOADING CAPACITY IS DETERMINED BY: Dimensions and material of the cabinet. Material and thickness of the side panel. Position in relation to the top panel. Type, diameter and length of the screws used. Dynamic stress.

Locking Device

15 mm

CH022.001.009 12 mm

_technical details

FURNITAL

96009600

200 200 ITEM

HEIGHT (mm)

895 AP 895P2 AP10 P2 1210 12579 94 579 895 AP 89502 AP 02

CH022.001.009

5000

60000

5000

8.5

BOX

579 200 579

8.5

9 22

5000 54

60000

5000

9 22

PE PE

200 200

STEEL HANGING WALL BAR

10 10

Fe Fe

TECHNICAL HARDWARES | HANGING BRACKETS

6.2

29-01-2019 29-01-2019

575 575 3.1.1 3.1.1 COVER CAP 8

0.5 0.5

3.2 3.2

ø6

ITEM

SPECIFICATIONS

FINISHING

BOX

CH022.001.010

Universal

White

5000

CH022.001.011

Universal

Nickel

5000

CH022.001.012

Universal

Brown

5000

CH022.001.013

Universal

Silver Grey

5000

Other colors available on request.

ø6

01-05-2016

3.1

544

3.1

544

01-05-2016

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED HANGING BRACKET 15MM EMBEDDED IN LATERAL PANEL

ITEM

SPECIFICATIONS

BOX

CH022.001.004

Left

CH022.001.003

Right

Locking Device

18 mm

CH022.001.008 12 mm

_technical details

FURNITAL

10 10

www.camar.it/warning www.camar.it/warning

TECHNICAL HARDWARES | HANGING BRACKETS

Fe Fe

9600 9600

HEIGHT (mm) 895895 AP AP P2 10 P2 12 10 12 579 579BOX 579 579200 895895 AP AP 02 0294

ITEM

CH022.001.008 9 9

8.5

6.2

5000

8.5

9 22

60000

5000

5000 54

60000

5000

9 22

6.2

PE PE

200 200

STEEL HANGING WALL BAR

29-01-2019 29-01-2019

3.1.13.1.1576576 COVER CAP 8

0.5 0.5

3.2 3.2

ø6

ITEM

SPECIFICATIONS

FINISHING

BOX

CH022.001.010

Universal

White

5000

CH022.001.011

Universal

Nickel

5000

CH022.001.012

Universal

Brown

5000

CH022.001.013

Universal

Silver Grey

5000

Other colors available on request.

ø6

01-05-2016

3.1

544

3.1

544

01-05-2016

FURNITAL

TECHNICAL HARDWARES | HANGING BRACKETS

CONCEALED HANGING BRACKET 20MM EMBEDDED IN LATERAL PANEL

ITEM

SPECIFICATIONS

BOX

CH022.001.002

Left

CH022.001.001

Right

Locking Device

18 mm

CH022.001.007 12 mm

_technical details 20

1146

34.5

8.5

34.5

8.5

12 mm 12 mm

169

18 mm 18 mm

76.5

6 6

76.5

6 6

169 32

76.5 32

76.5

169

Ø4

34.5

68 60

68 60 20

FURNITAL 01-05-2016 01-05-2016

249

1 10 10

TECHNICAL HARDWARES | HANGING BRACKETS

STEEL HANGING WALL BAR

ITEM

HEIGHT (mm)

BOX

CH022.001.007

120

200

PE PE 5000

60000

5000

60000

5000

COVER CAP 8

0.5 0.5

3.2 3.2

ø6

ITEM

SPECIFICATIONS

FINISHING

BOX

CH022.001.010

Universal

White

5000

CH022.001.011

Universal

Nickel

5000

CH022.001.012

Universal

Brown

5000

CH022.001.013

Universal

Silver Grey

5000

Other colors available on request.

ø6

01-05-2016

3.1

544

3.1

544

01-05-2016

FURNITAL

70 Kg TECHNICAL HARDWARES | HANGING BRACKETS

821 26 Z1 IN

608-609

DX SX

www.camar.it/warning

12 mm

18 mm

ZAMAK

CONCEALED HANGING BRACKET 26MM EMBEDDED IN LATERAL PANEL

1800

100

ITEM

SPECIFICATIONS

BOX

CH022.001.016

Left

CH022.001.014

Right

18 mm

A = 9-12 mm

3 70 Kg

895 AS Z1 20 12

A = 0-9 mm

608-609

www.camar.it/warning

12 mm

Fe 9600

200

52 16

120

6.2

39-41

810 15

After assembly, verify that the anti-drop system has been activated.

_technical details 578 895 AS Z1 20 12

809

06 08

544

Verificare dopo il montaggio l’avvenuta attivazione del sistema antisgancio.

536-537

01-05-2016

578

252

3.1

26 18

9.5

12 mm

Verificare dopo il montaggio l’avvenuta attivazione del sistema antisgancio.

18 mm

After assembly, verify that the anti-drop system has been activated.

9 20 62

306 1

9.5

CH022.001.015

Locking Device

229

MIN. 80

68 60

26 18

229

102

Ø4.5

102

FURNITAL

608-609 608-609

1 10 10

AS S Z1 Z120 2012 12

TECHNICAL HARDWARES | HANGING BRACKETS

70 Kg

895 AS STEEL Z1 20HANGING 12 WALL BAR

608-609

www.camar.it/warning www.camar.it/warning

FeFe

www.camar.it/warning

ITEM

9600

200

PE PE

9600 9600

200 200

CH022.001.015 200

20 20

9.5

BOX

120

200

9.59.5

52 52 16 16 120 120

5000 62 62

6.2

11 11

3 3

6.2 6.2

9 9

20 20

5000

52 52

60000

5000

60000 20

5000

120

20 20

9 9

200 200

HEIGHT (mm)

3 3

COVER CAP 8

3.2 3.2

0.5 0.5

ø6 578

ø6

ITEM

SPECIFICATIONS

FINISHING

BOX

CH022.001.010

Universal

White

5000

CH022.001.011

Universal

Nickel

5000

CH022.001.012

Universal

Brown

5000

CH022.001.013

Universal

Silver Grey

5000

Other colors available on request. 01-05-2016

01-05-2016

3.1

544

3.1

544

01-05-2016

FURNITAL

_01.2

LEVELERS

_01.1 Hanging brackets _01.2 Levelers _01.3 Straighteners _01.4 Invisible shelf brackets _01.5 Push latches

FURNITAL

TECHNICAL HARDWARES | LEVELERS

Ø28mm

PTIONAL

ZAMAK

ABS

KITCHEN LEVELERS WITH FRONT ADJUSTMENT FOR PLINTH ERCOLINO H. 60 - 100MM LEVELERS FOR PLINTH H. 60MM ERCOLINO SYSTEM

437

07 08 10

P4 00 56 F0

ITEM

Ø28mm

KL024.014.001

OPTIONAL

HBcm

H (mm)

D1 (mm)

D2 (mm)

ADJUSTMENT (mm)

+ 20 ZAMAK

ABS48

BOX 50

ERCOLINO

A ERCOLINO SYSTEM

1 REAR ART. 437 Ø28mm

FRONT ART. 456ABS

ZAMAK

ERCOLINO

ERCOLINO SYSTEM

_technical instruction

FRON T

840

840 00 P2 H2 16 840 002 P2 H2 20 840 00 P2 H2 A6

840

840 840 840 840 840

00 00 00 00 00

P2 P2 P2 P2 P2

H2 16 H2 20 H2 FURNITAL A6 M4 RF M6 RF

22 8

7.5

ø48

ERCOLINO _front leveler

ERCOLINO SYSTEM

+20mm 18 mm 0mm

MANUAL

21 7.5

RONT ART. 455

24 ø48

ø48

P4 00 55 F0

ø48

05 06 07

EAR ART. 437

ERCOLINO SYSTEM

ø48

Hcm 6= AUTOMATIC

+25mm 18 mm 0mm

Hcm 7 Hcm 8 = Hcm 10 300 Kg

ø48

+20mm 18 mm -5mm 150 Kg

H 7.5

ø48

ERCOLINO

MANUAL

ERCOLINO SYSTEM

+20mm 18 mm 0mm

24 ø48

21 7.5

see accessories for levelers with front adjustment on pag. 60 - 61

24 ø48

RONT ART. 455

3.1.1

ERCOLINO _rear leveler

7.5

Hcm

22 H

TECHNICAL HARDWARES | LEVELERS

24 RECTANGULAR BASE ø48

FURNITAL

TRIANGULAR BASE

CLIP

SCREWDRIVER L. 680MM

Ø28mm

PTIONAL

ZAMAK

ABS

TECHNICAL HARDWARES | LEVELERS

ERCOLINO

LEVELERS FOR PLINTH H. 80 - 100MM ERCOLINO SYSTEM

437

07 08 10

P4 00 56 F0

ITEM

H (mm)

D1 (mm)

KL024.014.002

+ 20 / - 5 ZAMAK

KL024.014.003

ABS48

100

+ 20 / - 5

Ø28mm

OPTIONAL

HBcm

D2 (mm)

ADJUSTMENT (mm)

BOX

ERCOLINO

A ERCOLINO SYSTEM

1 REAR ART. 437 Ø28mm

FRONT ART. 456ABS

ZAMAK

ERCOLINO

ERCOLINO SYSTEM

_technical instruction

FRON T

3 58

840 2

4 809 536-537

840 840 840 840 840 840

00 P2 002 P2 00 P2 00 P2 00 P2 00 P2

H2 16 H2 20 H2 A6 M4 RF M6 RF X3 RF

840

840 840 840 840 840 840 840

00 00 00 00 00 00 00

P2 P2 P2 P2 P2 P2 P2

H2 16 H2 20 H2 A6 M4 RF M6 RF X3 FURNITAL RF X7 RF

ø48

TECHNICAL HARDWARES | LEVELERS

_front leveler ERCOLINO

MANUAL

ERCOLINO SYSTEM

+20mm 18 mm -5mm

7.5 21

ONT ART. 456

ø48

Hcm

P4 00 55 F0

ERCOLINO _rear leveler

EAR ART. 437

ERCOLINO SYSTEM

ø48

Hcm 6= AUTOMATIC

+25mm 18 mm 0mm

Hcm 7 Hcm 8 = Hcm 10 300 Kg

7.5

24 ø48

+20mm 18 mm -5mm 150 Kg

H 7.5

ø48

ERCOLINO

+20mm 18 mm 0mm

MANUAL

ERCOLINO SYSTEM

24 ø48

see accessories for levelers with front adjustment on pag. 60 - 61

ø48

RONT ART. 455

3.1.1

21 7.5

05 06 07

7.5

24 ø48

RECTANGULAR BASE

FURNITAL

3.1.1

TRIANGULAR BASE

CLIP

SCREWDRIVER L. 680MM

TECHNICAL HARDWARES | LEVELERS 400

4800 4800

400

800

ACCESSORIES FOR LEVELERS WITH FRONT ADJUSTMENT FOR PLINTH H. 60 - 100MM RECTANGULAR BASE

ITEM

BOX

KL024.009.004

400

ERCOLINO SYSTEM

ERCOLINO

ø8 11

ø8

ø16

ABS

ø16

ABS

840 00840 P2 00 X3P2 RFX3 RF

200

200 1200

1200800

800

TRIANGULAR BASE

ITEM

BOX

KL024.009.003

3.1.1

200

3.1.1

110 64

24 24

3 29

FURNITAL 3.1.1

3.1.1

110

ø10

ø10 ø16

26 ø16

TECHNICAL HARDWARES | LEVELERS

CLIP

226 226 00 24 00AL 24P2 AL P2

ABS

Ø28mm Ø28mm

ABS

28800

KL024.003.016 800 800

BOX

37 26

ITEM

44 ERCOLINO

8.5 4.5

809 68 C1 04 00

ERCOLINO SYSTEM

1600

UNICO

MATIC

4 MATIC 24

1.5

1600

800

24 ø28

ø28

SCREWDRIVER L. 680MM 1000

100

ITEM

LENGTH (mm)

BOX

KL024.014.101

680

CH.4

L 680 mm 680

L 680mm

809 70 C1 04 00

ERCOLINO

ERCOLINO SYSTEM

TOP

SOFT GRIP

LINE

3.1

510 3.1

UNICO

MATIC

4 MATIC

BLACK POINT

01-05-2016 01-05-2016

510

FURNITAL

UNICO

1200

TECHNICAL HARDWARES | LEVELERS

KITCHEN LEVELERS FOR PLINTH H. 100 - 150MM KITCHEN LEGS WITH 20MM ADJUSTMENT

ITEM

H (mm)

D1 (mm)

D2 (mm)

ADJUSTMENT (mm)

BOX

KL024.001.013

100

+ 20 / - 5

400

KL024.001.014

120

+ 20 / - 5

400

KL024.001.015

150

+ 20 / - 5

200

ITEM

H (mm)

D1 (mm)

D2 (mm)

ADJUSTMENT (mm)

BOX

KL024.001.016

100

+ 60 / - 5

400

KL024.001.017

120

+ 60 / - 5

400

KL024.001.018

150

+ 60 / - 5

200

KITCHEN LEGS WITH 60MM ADJUSTMENT

FURNITAL

TECHNICAL HARDWARES | LEVELERS

ACCESSORIES FOR KITCHEN LEVELERS FOR PLINTH H. 100 - 150MM FIXING PLATES FOR KITCHEN LEVELER

ITEM

BOX

KL024.002.006

400

840 84022 22P2 P2T3 T300 00 ABS ABS

3600 3600

400400

800800

ITEM

BOX

KL024.002.007

400

85 85

ø10ø10

26 26

85 64

64 64

29 29

24 24

FURNITAL

3.1 3.1165165

TECHNICAL HARDWARES | LEVELERS

CLIPS FOR PLINTH

ITEM

BOX

KL024.003.002

800

ITEM

BOX

KL024.003.004

800

24mm

ITEM

BOX

KL024.003.005

800

24mm

ITEM

BOX

KL024.003.001

800

FURNITAL

TECHNICAL HARDWARES | LEVELERS 800

19200

1600

METAL CLIP FOR WOODEN PLINTH

THICKNESS OF PLINTH (mm)

BOX

KL024.003.006

15 - 22

800

KL024.003.007

12 - 19

800

MAX. 20

ITEM

01-05-2016

3.1

FURNITAL

515

316 16 18 12 R3

TECHNICAL HARDWARES | LEVELERS

Ø16mm

+8mm 0mm

ZAMAK

HIDDEN LEVELERS

316 16 23 12 R3

CONCEALED LEVELER FOR SIDE OR BOTTOM PANEL 1 100

4800

+13mm 0mm

ZAMAK

400

ITEM

809 20 C1 04 00

Ø16mm

FL057.009.001

ADJUSTMENT (mm) 537

809

100

XXX

BOX

Z1 M8 00

4800

100

400

ZAMAK

809

Z1 M8 00

4800

809 20 C1 04 00

FL057.009.002

ADJUSTMENT (mm) Fe 537

+ 13

809

ZAMAK

Z1 M8 00

BOX 9

XXX

100

537

Ø16mm

809

23 31-03-2020

+18mm 0mm

ZAMAK

Z1 M8 00

ø16

7200

XXX

31-03-2020

3.1.1

ITEM 100

400

3 12

809 20 C1 04 00

3.1.1

7200

316 16 35 12 R1

100

ø16

ADJUSTMENT (mm) 400

FL057.009.003

+ 18 809 20 C1 04 00

BOX 537

809

100 Z1 M8 00

16.4

3.5 12

ø16

6 6

Ø16mm

400

+18mm 0mm

31-03-2020

3.1.1

ITEM

6 6

316 16 35 12 R1

ø16

XXX 537

1 100

+13mm 0mm

6 6

809 20 C1 04 00

Ø16mm

6 6

316 16 23 12 R3

ø16

31-03-2020

3.1.1

3.1.1 9

809 20 C1 04 00

537

809

Z1 M8 00

FURNITAL

31-03-2020

ART. ART.316 316

TECHNICAL HARDWARES | LEVELERS

ART. 316

SIDE SIDEPANEL PANEL

_installation of leveler in the side panel

SIDE PANEL

front

rear

front

rear

90°

ART. 316

BOTTOMPANEL PANEL BOTTOM BOTTOM PANEL SIDE PANEL

_installation of leveler in the bottom panel

front

rear

front

rear

90°

BOTTOM PANEL FURNITAL

02 = 25 03 = 32 04 = 44 05 = 52 07 = 70 10 = 100 12 = 120

Amm

0mm

* *

0mm

mm TECHNICAL HARDWARES | LEVELERS

Fe CONCEALED LEVELER FOR SIDE PANEL

Z0 12 02 25 32 * 44 *

Amm 25=

Ø12mm

52 70 00 20

100

ZAMAK 4800

200

4800 H (mm)

800 LOAD CAP. (Kg) ADJUSTMENT (mm)

BOX

+ 10

300

200

FL054.001.002

+ 18

300

200

FL058.001.001

+ 25

300

100

LGAFL054.001.003

+ 25

300

100

FL054.001.004

+ 25

300

100

800 FL054.001.005

100

+ 25

300

100

FL054.001.006

120

+ 25

300

100

FL054.001.018 200300 Kg 150 Kg

200 200

LGA

ZAMAK

+10mm +18100 mm AmmITEM +25mm 0mm Amm 32= 0mm 44-120= 0mm

150 Kg

300 Kg

Ø12

0mm

D = 12mm

D = 6mm

809

809 536-537

536-537

306 02 AL MA 00 9 5.5

306 02 AL MA 00

517

517 ADJUSTMENT

ASSEMBLING MACHINE 39 39 ITEM

BOX

FL054.001.008

01-05-2016

FURNITAL

0mm

ABS

TECHNICAL HARDWARES | LEVELERS

304 28 Z2 50 A2

200 Kg

PLASTIC HIDDEN LEVELER FOR BOTTOM PANEL 7200

200

1200

ITEM

ADJUSTMENT (mm)

BOX

FL057.004.003

+ 10

200

7200

200

304 28 Z2 50 A2

200 Kg

ø14

14.5

ø20

809

ø16

536-537

7200

200

1000

ZAMAK HIDDEN LEVELER WITH PLASTIC INTERNAL ADJUSTMENT FOR BOTTOM PANEL 3.1

14.5

ø14

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL057.004.001

+ 10

200

ø16

ITEM

ø20

01-05-2016

ø2 8

2 .5

4 .5

3.1

ø2 8

2 .5

4 .5

ø5 0 ø2 8

ø5 0

FURNITAL

3.1

35 01-05-2016

TECHNICAL HARDWARES | LEVELERS

KNOCK-IN LEVELERS KNOCK-IN LEVELER WITH PLASTIC INTERNAL ADJUSTMENT

ITEM

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL056.002.001

+ 20

100

200

KNOCK-IN LEVELER WITH METAL INTERNAL ADJUSTMENT

ITEM

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL056.002.003

+ 20

150

200

FURNITAL

TECHNICAL HARDWARES | LEVELERS

KNOCK-IN LEVELER WITH PLASTIC INTERNAL ADJUSTMENT

ITEM

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL056.001.001

+ 10

100

200

KNOCK-IN LEVELER WITH METAL INTERNAL ADJUSTMENT

FURNITAL

ITEM

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL056.001.003

+ 10

150

200

308

Z2 90 02 *

TECHNICAL HARDWARES | LEVELERS

308

Z2 90 02 * LEVELERS 04 05 06 07 08 09 10

400 Kg

+20mm 0mm

WITH METRIC THREAD 1

ABS

ZAMAK

CTBA

04 05 06 07 08 09 10

400 Kg

+20mm 0mm

ABS

ZAMAK

Hcm 1200

100

LEVELER FOR SCREW M10

Hcm

1200

100

CTBA

200

ITEM

H (mm)

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL057.001.005

+ 20

400

200

FL057.001.001

+ 20

400

100

FL057.001.006

+ 20

400

100

FL057.001.003

+ 20

400

100

FL057.001.007

100

+ 20

400

100

809 536-537

809

308 518

M10x1

202 M10x1 3.6

506 H 7-10

225

226

228 512 H 5-10

ø16

01-05-2016

308

04 05 06 07 08 09 10

Z2 P0 02 *

+20mm 0mm

400 Kg

ABS

06 07 08 09 10

3.6

+20+20 mm mm 0mm0mm

6 6

ø38

3.1

M10x1

202

203

504

505

506

H 7-10

H 5-10

H 7-10

226 225400 400 Kg Kg

228

509-510

512

H 5-10

508

ABSABS

06 07 08 09 10

ø28

60 8

M10x1

308 308 Z2Z2P0P00202 04 04 05 * 05 *

518

509-510 H 5-10

16 30

308

204

505 H 5-10

508

ø28

203

504 H 7-10

Fe Fe

30 60

HcmH8cm

48004800

100 100

ø38

ZAMAK

*3 * 45

200 200

Hcm

01-05-2016

4800

100

200

ITEM

H (mm)

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL057.001.011

+ 20

400

200

FL057.001.002

+ 20

400

100

FL057.001.012

+ 20

400

100

FL057.001.013

+ 20

400

100

FL057.001.014

100

+ 20

400

100

809809

809 536-537

505

506

H 5-10

H 7-10

504 504

228 512 H 5-10

ø10 ø10

30 60

01-05-2016

3.1

24 ø38 ø38

24 ø38

H 5-10 H 5-10H 5-10 H 5-10

506 506

508 508 509-510509-510 512 512 3.6 3.6

505 505

H 7-10 H 7-10H 5-10 H 5-10H 7-10 H 7-10

225225226226228228

509-510 H 5-10

536-537536-537

202202203203204204

ø28 ø28 30

46 32

ø16

508 3.6 ø28

226

9 20

504 H 7-10

225

204

9 ø10

203

ø16

202

ø16

ZAMAK ZAMAK

LEVELER WITH PIN Ø10

204

ø16

536-537

3.1 343 .1 43

FURNITAL

01-05-2016 01-05-2016

308 308 Z2Z2P3P30202 04 04 TECHNICAL HARDWARES LEVELERS 05 *05| * 1

308

04 05 06 07 08 09 10

Z2 P3 02 *

+20mm 0mm

06 07 08 09 10

400 Kg

06 07 08 09 10

PA6

400400 Kg Kg

6 6 ABSABS

ZAMAK PA6PA6 ZAMAK

Fe Fe

HcmHcm 48004800

100 100

ABS

ZAMAK

200 200

H LEVELER WITH PIN AND DOWELS Ø10 cm

4800

100

200

ITEM

H (mm)

ADJUSTMENT (mm)

LOAD CAP. (Kg)

BOX

FL057.001.015

+ 20

400

200

FL057.001.016

+ 20

400

100

FL057.001.017

+ 20

400

100

FL057.001.018

+ 20

400

100

FL057.001.019

100

+ 20

400

100

809809

809 536-537

505

506

H 5-10

H 7-10

226

228

508

509-510

512

H 5-10

504

ø10 ø10 ø10 ø10 ø16

505

506

508 509-510509-510 512

512

H 5-10 H 5-10H 5-10 H 5-10

16 30

32 24 ø38 ø38

46 32

508

01-05-2016

504

H 7-10 H 7-10H 5-10 H 5-10H 7-10 H 7-10

225225226226228228

3.1

536-537536-537

202202203203204204

225

16 30

ø38

504 H 7-10

5 24

204

20 11

ø16

ø10

9 ø10

203

202

ø16

+20+20 mm mm 0mm 0mm

16 30

01-05-2016 01-05-2016

3.1 344 .1 44

FURNITAL

_01.3

STRAIGHTENERS

_01.1 Hanging brackets _01.2 Levelers _01.3 Straighteners _01.4 Invisible shelf brackets _01.5 Push latches

FURNITAL

Indicazioni per il posizionamento dei tenditori Wardrobe adjusters location TECHNICAL HARDWARES | STRAIGHTENERS

ANTE IN AGGLOMERATO DI LEGNO I TENDITORI DEVONO ESSERE POSSIBILMENTE POSIZIONATI CON LE QUOTE "A" E "B" UGUALI. NEL CASO DI ANTE CON LARGHEZZA SUPERIORE A 1200 E' CONSIGLIATO METTERE UN TERZO TENDITORE AL CENTRO DELL'ANTA.

ANTE A TELAIO NELLE ANTE A TEALIO I TENDITORI VENGONO POSIZIONATI NELLE PARTI STRUTTURALI "A" DEL TELAIO. PER LE ANTE CON LARGHEZZA MAGGIORE DI 1200 - 1300 E' CONSIGLIATO PREVEDERE UN MONTANTE CENTRALE.

WOOD DOORS WARDROBE ADJUSTERS MUST BE LOCATED WITH SAME "A" AND "B" VALUES. IN CASE OF DOORS MORE THAN 1200-1300 WIDE, A THIRD WARDROBE = RECCOMENDED. = = DOOR IS = ADJUSTER IN THE CENTER OF THE

FRAME DOORS WARDROBE ADJUSTERS ARE LOCATED IN THE FRAME STRUCTURAL POSITION "A". FOR DOORS MORE THAN 1200-1300 WIDE, A CENTRAL SUPPORT IS RACCOMENDED.

WARDROBE STRAIGHTENERS WITH CENTRAL ADJUSTMENT

GENERAL FEATURES: TORSION FORCE: 6N HORIZONTAL FORCE: 60N (test report on panel dimension 2500 x 400 x 20) ADJUSTMENT RANGE: +/- 10MM MINIMUM DOOR THICKNESS 16MM

250

500

250

Taglio a misura tenditori acciaio Cutting procedures for the cuttable versions W = 1000

INSTALLATION SUGGESTIONS

_installation procedure

2° PROCEDURE POSSIBILITY IN CASE OF SLIDING DOOR MECHANISM, THE DOOR HAS MORE BENDING IN THE UPPER PART ( fig. 1 ). ONLY THE LOWER PART OF THE DOOR CAN BE CUT, IN CASE OF USAGE OF A WARDROBE ADJUSTER WITH SMALLER PATTERN ( pic.2 ), OF NECESSARY.

Max.

T+T

tag doo lio a r cu misu ttin ra g ant a

Peso weight

A = Interasse

Reazione Reaction

~ 1/3 Anta

A = interasse A = distance

nuovo interasse new distance

5,5

9,5

1° MODO 2° MODO OnTENDITORE doors of width 600mm-1200mm is suggested to use 2 straighteners A) TAGLIO A MISURA ACCIAIO NEL CASO L'ANTA SIA PER ARMADIO SCORREVOLE SI OSSERVA CHE LA B) TAGLIO A MISURA ANTA. OnDELL' doors of width larger than 1200 is suggested to use DEFORMAZIONE 3 straightenersDELL'ANTA E' PREVALENTEMENTE NELLA PARTE SUPERIORE (fig. 1). 1° PROCEDURE POSSIBILITY SE SI SCEGLIE UN TENDITORE DI INTERASSE INFERIORE E SI POSIZIONA A) WARDROBE ADJUSTER CUTTING NORMALMENTE NELLA PARTE SUPERIORE COME INDICATO IN FIG. 2, EXAMPLE OF INSTALLATION ON 1000MM WIDE DOOR B) DOOR CUTTING QUESTO DA' LA POSSIBILITA DI TAGLIARE SOLO L'ANTA NELLA PARTE W = 1000mm : Straighteners = 2pcs INFERIORE QUANTO SERVE.

fig. 1

FURNITAL

TECHNICAL HARDWARES | STRAIGHTENERS

STRAIGHTENERS WITH CENTRAL ADJUSTMENT

+-./0123-!/&!0.4&552!1062!+,#$#!7!+,#$)! +-./0123-!/&!0.4&552!1062!+,#$#!7!+,#$)! +-./0123-!/&!0.4&552!1062!+,#$#!7!+,#$)! 8-4-55-/!9&3/32:-!&/;<51-3!+,#$#!7!+,#$)!1=68-4-55-/!9&3/32:-!&/;<51-3!+,#$#!7!+,#$)!1=68-4-55-/!9&3/32:-!&/;<51-3!+,#$#!7!+,#$)!1=6-

WS066.001.004

+,#$# +,#$)! 43 32

8.5

Ø7

2.5Ø35

8.5

E*!,

Space on bottom part of the door, 1-51!&AA>2%-3&12!"*$$'?$$'"D 1-51!&AA>2%-3&12!"*$$'?$$'"D 1-51!&AA>2%-3&12!"*$$'?$$'"D up to 300mm 6&.->!1-51!"*$$'?$$'"D 6&.->!1-51!"*$$'?$$'"D 6&.->!1-51!"*$$'?$$'"D

11.5

E*!,

Ø7 Ø7

@!,%

2.5

8.5

1-51!&AA>2%-3&12!"*$$'?$$'"$ 1-51!&AA>2%-3&12!"*$$'?$$'"$ Ø7 Ø7 Ø7 6&.->!1-51!"*$$'?$$'"$ 6&.->!1-51!"*$$'?$$'"$

+,#$)!

@$!,

Ø35 11.5

". $ )O,( ,N)$ $- & # ) . ' ' )V ,NU ,NU ' . ( ' . ( &')T 25 T! "#$%

2.5

11.5

@!,% max 190

@!,% @$!,

@!,%

.$ ,(" )$)O 2329 )#$- &,N . V' U U' ) (,N (,N T' . T' . #$%&') " !2598

min 60

43 32

@$!, 1-51!&AA>2%-3&12!"*$$'?$$'"$ 6&.->!1-51!"*$$'?$$'"$

2248

+,#$# +,#$)!

43 32

@!,%

Nickel / Grey

max 190 min 60

+,#$#

.$ ,(" )$)O Nickel /,NGrey $- & # ) . V' U U' ) (,N (,N T' . T' . #$%&') ! " Nickel / Grey

<=>45??@)5AAB4C?BD)=<) <=>45??@)5AAB4C?BD)=<) E==DB<)05<B?A)=>) E==DB<)05<B?A)=>) 5FF?=4B>5GBA)5<D)H=??=E) 5FF?=4B>5GBA)5<D)H=??=E) WS066.001.005 E==D)05<B?A3 E==D)05<B?A3 I767<F)E7GH)A2>BEA3 I767<F)E7GH)A2>BEA3 47<7484)GH72J<BAA)KL3 47<7484)GH72J<BAA)KL3 2B<G>B)D7AG5<2BM)47<7484)K9;;) 2B<G>B)D7AG5<2BM)47<7484)K9;;) WS066.001.006 4567484)9:;; 4567484)9:;;

A = center distance

<=>45??@)5AAB4C?BD)=<) E==DB<)05<B?A)=>) 5FF?=4B>5GBA)5<D)H=??=E) E==D)05<B?A3 I767<F)E7GH)A2>BEA3 47<7484)GH72J<BAA)KL3 2B<G>B)D7AG5<2BM)47<7484)K9;;) 4567484)9:;;

1988

min 60

BOX

max 190

A (mm)

$!!,$,N)*)S$O$)*)012)-.,-,N (#''&))*))+,'*!$(#)*)-.'/)012 Nickel / Grey

FINISHING

<=>45?4B<GB)5AAB4C?5G7)A8)<=>45?4B<GB)5AAB4C?5G7)A8) $!!,$,N)*)S$O$)*)012)-.,-,N 05<<B??7)D7)?BF<=)=) $!!,$,N)*)S$O$)*)012)-.,-,N 05<<B??7)D7)?BF<=)=) (#''&))*))+,'*!$(#)*)-.'/)012 5FF?=4B>5G7)B)G54C8>5G73 (#''&))*))+,'*!$(#)*)-.'/)012 5FF?=4B>5G7)B)G54C8>5G73 WS066.001.003 I7AA5FF7=)2=<)17G73 I7AA5FF7=)2=<)17G73 A0BAA=>B)47<74=)KL3 A0BAA=>B)47<74=)KL3 7<GB>5AAB)47<)K9;;)456)9:;; 7<GB>5AAB)47<)K9;;)456)9:;;

#E"D( KQ9:

F0.05G0.A 1=6- %-&5<3-

K[W9 #E"D( KQ9:

F0.01<3&!!!!!!!!!!!!!!!!! :2' HA!O!:2' F0.05G0.A

#E"D( KQ9: K[W9

L$B*$

F0.05G0.A1=6- %-&5<3-

!!N!! $ !!

1=6- %-&5<3-

!!#"!! $ !!

%05<3&!WITH %05<3&! %05<3&! 1062!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! 1062!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! 1062!!!!!!!!! CUTTABLE STRAIGHTENERS CENTRAL 5 :2' HA!O!:2'ADJUSTMENT 5 :2' HA!O!:2' 5

L$B*$

+,#$)! L$B*$

+,#$)! +,#$#!

L$B*$

+,#$#!

Ø4

!!N!! $ !!

+,#$)!

11.5 - 0.2 max 190

Ø4

L$B*$ !!#"!! $ !!

+,#$#!

123451675+8+ !"#$#%&'("$)*+,'#+

Ø4

max 190

11.5 - 0.2

K[W9

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

GB<D7G=>B)BY)740=>G5<GB) FINISHING GBB)7?)>7IB>74B<G=)DB??5) "*ND( 9][: 9QWK

ITEM 9QWK "*ND( 9][:

"*ND( 9][:

X85<D=)A7)5AAB4C?5)078Y)D7)8<) X85<D=)A7)5AAB4C?5 GB<D7G=>B)BY)740=> GBB)7?)>7IB>74B< >=G5Z7=<B)DB??5)2H7 AGBAA=)?5G=3

GB<D7G=>B)BY)740=>G5<GB) A (mm) BOX GBB)7?)>7IB>74B<G=)DB??5) 9QWK

>=G5Z7=<B)DB??5)2H751B)D5??=) >=G5Z7=<B)DB??5)2H751B)D5??=) <=>45?4B<GB)5AAB4C?5G7)A8) <=>45?4B<GB)5AAB4C?5G7)A8) <=>45?4B<GB)5AAB4C?5G7)A8) AGBAA=)?5G=3 AGBAA=)?5G=3 $!!,$,N)*)S$O$)*)012)-.,-,N $!!,$,N)*)S$O$)*)012)-.,-,N $!!,$,N)*)S$O$)*)012)-.,-,N 05<<B??7)D7)?BF<=)=) 05<<B??7)D7)?BF<=)=) 05<<B??7)D7)?BF<=)=) (#''&))*))+,'*!$(#)*)-.'/)012 (#''&))*))+,'*!$(#)*)-.'/)012 5FF?=4B>5G7)B)G54C8>5G73 5FF?=4B>5G7)B)G54C8>5G73 5FF?=4B>5G7)B)G54C8>5G73 Nickel / Grey 1988 EHB<)5AAB4C?7<F)4=>B)GH5<) 25 WS066.001.007 EHB<)5AAB4C?7<F)4=>B)GH5<) %05<3&! (#''&))*))+,'*!$(#)*)-.'/)012 %05<3&! %05<3&! 1062!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! 1062!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! 1062!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! I7AA5FF7=)2=<)17G73 I7AA5FF7=)2=<)17G73 I7AA5FF7=)2=<)17G73 =<B)GB<A7=W)7G)7A) =<B)GB<A7=W)7G)7A) 5 :2' HA!O!:2' 5 :2' HA!O!:2' 5 :2' HA!O!:2' cuttable 190mm 740=>G5<G)G=)JBB0)GHB)JB@) 740=>G5<G)G=)JBB0)GHB)JB@) A0BAA=>B)47<74=)KL3 A0BAA=>B)47<74=)KL3 A0BAA=>B)47<74=)KL3 1=6- %-&5<3F0.05G0.A 1=6- %-&5<3F0.05G0.A 1=6- %-&5<3F0.05G0.A >=G5G7=<)>BIB>B<2B)=<)GHB) >=G5G7=<)>BIB>B<2B)=<)GHB) 7<GB>5AAB)47<)K9;;)456)9:;; 7<GB>5AAB)47<)K9;;)456)9:;; 7<GB>5AAB)47<)K9;;)456)9:;;

9P ""?D( 99P: ""?D( 99P: 9P A54B)A7DB3 Nickel / Grey 2248 9PA54B)A7DB3 WS066.001.008 +,#$)( $E)U,!^'&$#N)))) U,!_'& +,#$)( 9] $E)U,!^'&$#N)))) +,#$)( U,!_'& 9] $E)U,!^'&$#N)))) U,!_'& 9] <=>45??@)5AAB4C?BD)=<) <=>45??@)5AAB4C?BD)=<) <=>45??@)5AAB4C?BD)=<) .$ "*ND( 9][: 9QWK "*ND( 9][: "*ND( ,(9][: 9QWK "9QWK ". $ ,( E==DB<)05<B?A)=>) E==DB<)05<B?A)=>) E==DB<)05<B?A)=>) O O ) )$) !!!"#$$"%&$' !!!"#$$"%&$' !!!"#$$"%&$' 5FF?=4B>5GBA)5<D)H=??=E) 5FF?=4B>5GBA)5<D)H=??=E) 5FF?=4B>5GBA)5<D)H=??=E) ,N)$Grey -& - &,N Nickel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rey 2598 WS066.001.010 ! "#Nickel !"

E*!,

min 60

8.5

Ø7

+,#$)! F0.01<3&!!!!!!!!!!!!!!!!! :2' HA!O!:2' F0.05G0.A

")"N(

9PW:

9\9[

9PW:

+,#$#(

""?D(

L$B*$ !!N!! $ !!

#NDD( K[::

L$B*$

#E"D( KQ9:

9KWL

9\9[ ")"N(

K[W9

!!N!! $ !!

K[W9

#NDD( K[:: #NDD( K[:: 9KWL )U,!^'&$#N)) U,!_'& $E)U,!^'&$#N)) 9] U,!_'& 9] ""?D(+,#$#( 99P: $E""?D( 99P: 9P

L$B*$

+,#$#! !!#"!! $ !!

+,#$)!

%05<3&! %05<3&! %05<3&! 1062!!!!!!!!! 1062!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! F0.01<3&!!!!!!!!!!!!!!!!! 1062!!!!!!!!! 5 5 :2' HA!O!:2':2' HA!O!:2' 5 1=6- %-&5<31=6- %-&5<3F0.05G0.A F0.05G0.A 1=6- %-&5<3#E"D( KQ9: #E"D( KQ9:

max 190

+,#$)!

Ø4

L$B*$ !!#"!! $ !!

+,#$#!

11.5 - 0.2

U,!_'& 99P: $E)U,!^'&$#N))

K[W9 9KWL 9]

L$B*$

= +,#$#!

Ø4 123451675+8+ !"#$#%&'("$)*+,'#+

2.5

Ø7

11.5 - 0.2

+,#$#(

11.5

1-51!&AA>2%-3&12!"*$$'?$$'"D 6&.->!1-51!"*$$'?$$'"D

1-51!&AA>2%-3&12!"*$$'?$$'"D 1-51!&AA>2%-3&12!"*$$'?$$'"D 6&.->!1-51!"*$$'?$$'"D 6&.->!1-51!"*$$'?$$'"D

E*!,

Ø35

8.5

@!,% A

@!,%

FURNITAL

" )O,( ,N)$ $- & ' .)# U V ) U' (,N (,N T' . T' . &') 25 ! "#$%

Ø7 Ø7 1-51!&AA>2%-3&12!"*$$'?$$'"$ Ø7 6&.->!1-51!"*$$'?$$'"$

Ø35

max 190

8.5

Ø7

@$!,

43 2.5 32

min 60

11.5

EHB<)5AAB4C?7<F)4= =<B)GB<A7=W)7G) 740=>G5<G)G=)JBB0)G >=G5G7=<)>BIB>B<2B) A54B)A7DB3

+,#$)!

@$!,

E*!,

2.5

11.5

@!,%

1-51!&AA>2%-3&12!"*$$'?$$'"$ 1-51!&AA>2%-3&12!"*$$'?$$'"$ cuttable 190mm 6&.->!1-51!"*$$'?$$'"$ 6&.->!1-51!"*$$'?$$'"$

@!,%

43 32

+,#$#

+,#$)!

@$!,

+,#$)!

@!,%

43 32

+,#$#

max 190

@!,%

4567484)9:;;

+,#$#

max 190

4567484)9:;;

99P:

4567484)9:;;

A = center distance

""?D(

min 60

!!#"!! $ !!

123451675+8+ !"#$#%&'("$)*+,'#+

!!#"!! $ !!

ITEM

<=>45?4B<GB)5AAB4C?5G7)A8) 05<<B??7)D7)?BF<=)=) 5FF?=4B>5G7)B)G54C8>5G73 I7AA5FF7=)2=<)17G73 A0BAA=>B)47<74=)KL3 7<GB>5AAB)47<)K9;;)456)9:;;

X85<D=)A7)5AAB4C?5)078Y)D7)8<) X85<D=)A7)5AAB4C?5)078Y)D7)8<) ")"N( 9\9[ 9PW: GB<D7G=>B)BY)740=>G5<GB) GB<D7G=>B)BY)740=>G5<GB) GBB)7?)>7IB>74B<G=)DB??5) GBB)7?)>7IB>74B<G=)DB??5)

X85<D=)A7)5AAB4C?5 GB<D7G=>B)BY)740=> GBB)7?)>7IB>74B<

Recessed wardrobe adjus

Indicazioni per il posizionamento dei tenditori Wardrobe adjusters location

Serie TN210 TN210 Series

I TENDITORI DELLA SERIE TN210 SONO NORMALMENTE ASSEMBLATI

SU PANNELLI DI LEGNO O TECHNICAL HARDWARES | STRAIGHTENERS AGGLOMERATI.

UTILIZZATI ANCHE SU PANNELLI DI TAMBURATO. SPESSORE MIN. 16.

ANTE A TELAIO NELLE ANTE A TEALIO I TENDITORI VENGONOFONDAMENTALI: POSIZIONATI NELLE PARTI CARATTERISTICHE STRUTTURALI "A" DEL TELAIO. POSSIBILITA' DI REGOLAZIONE INTERNA CON CHIAVE FISSA SIA PER LE ANTE CON LARGHEZZA MAGGIORE DI 1200CHE - 1300 E' CONSIGLIATO NELLA PARTE SUPERIORE NELLA PARTE INFERIORE. PREVEDERE UN MONTANTE CENTRALE.

WOOD DOORS WARDROBE ADJUSTERS MUST BE LOCATED WITH SAME "A" AND "B" VALUES. IN CASE OF DOORS MORE THAN 1200-1300 WIDE, A THIRD WARDROBE = RECCOMENDED. = = DOOR IS = ADJUSTER IN THE CENTER OF THE

FRAME DOORS L'ASTA UNICA OFFRE IL VANTAGGIO DI RIDURRE DA STRUCTURAL WARDROBE ADJUSTERS ARE LOCATED INI COMPONENTI THE FRAME ASSEMBLARE E LE LAVORAZIONI. POSITION "A". PER IL SU MISURA E' SUFFICIENTE TAGLIARE DA UN FOR DOORS MORE THAN 1200-1300 WIDE, ALATO. CENTRAL SUPPORT IS Key RACCOMENDED. SPESSORE MINIMO 16

WARDROBE STRAIGHTENERS WITH TOP ADJUSTMENT POSSIBILITA' DI REGOLAZIONE SUPERIORE CON CHIAVE ES. 4.

REGOLAZIONE ±10 INTERASSE MIN 1200 INTERASSE MAX 2800

GENERAL FEATURES: TORSION FORCE: 6N HORIZONTAL FORCE: 60N (test report on panel dimension

TN210 SERIES TENSIONERS ARE NORMALLY ASSEMBLED ON WOODEN PANELS OR AGGLOMERATES. ALSO USED ON HOLLOW WOOD 2500PANELS. x 400 x 20) MINIMUM THICKNESS 16.

ADJUSTMENT RANGE: +/- 10MM

KEY FEATURES: ADJUSTMENT WITH WRENCH ON TOP OR DOWN. IT'S POSSIBLE AJUST ON TOP WITH EX. 4 KEY. THE SINGLE ROD HAS THE ADVANTAGE OF REDUCING THE PARTS TO ASSEMBLE AND MACHINING OPERATIONS. TO CUSTOMISE JUST CUT ON ONE SIDE.

MINIMUM DOOR THICKNESS 16MM

250

500

MINIMUM THICKNESS 16 ADJUSTMENT ± 10 MINIMUM CENTRE DISTANCE 1200 MAXIMUM CENTRE DISTANCE 2800

250

INSTALLATION SUGGESTIONS On doors of width 600mm-1200mm is suggested to use 2 straighteners On doors of width larger than 1200 is suggested to use 3 straighteners EXAMPLE OF INSTALLATION ON 1000MM WIDE DOOR POSSIBILITA' A RICHIESTA SUL TN215 DI AVERE DOPPIA REGOLAZIONE O TAGLIABILE A RICHIESTA ON TN215 POSSIBILITY ON REQUEST TO HAVE DOUBLE ADJUSTMENT OR CUTTABLE.

W = 1000mm : Straighteners = 2pcs

Taglio a misura tenditori acciaio Tenditore da incasso tipo TN211 TN213 TN214 TN215 Cutting procedures for the adjusters cuttableTN211 versions Recessed wardrobe TN213 TN214 TN215 type W = 1000

1° MODO ASSEMBLATI SU ACCIAIO A)NORMALMENTE TAGLIO A MISURA TENDITORE LEGNO O STRAIGHTENERS B)PANNELLI TAGLIO ADIMISURA DELL' ANTA. AGGLOMERATI E TAMBURATI.

TN213

Tenditore da incasso tipo TN211 TN213 TN2 WITH TOP po TN211 TN213 TN214 TN215 Recessed wardrobe adjusters TN211 TN213 TN2 2° MODO NEL CASO L'ANTA SIA PER ARMADIO SCORREVOLE SI OSSERVA CHE LA ADJUSTMENT DEFORMAZIONE DELL'ANTA E' PREVALENTEMENTE NELLA PARTE SUPERIORE (fig. 1). SE SI SCEGLIE UN TENDITORE DI INTERASSE INFERIORE E SI POSIZIONA NORMALMENTE ASSEMBLATI SU PARTE SUPERIORE COME INDICATO IN FIG. 2, NORMALMENTE NELLA PANNELLI DI LEGNO O QUESTOEDA' LA POSSIBILITA DI TAGLIARE SOLO L'ANTA NELLA PARTE AGGLOMERATI TAMBURATI. FISSAGGIO CON VITI. www.omm.name INFERIORE QUANTO SERVE. SPESSORE MINIMO 16.

FISSAGGIO CON VITI.

una regolazione tagliabile one adjustment cuttable

ters TN211 TN213 TN214 TN215 type ITEM

± 10

* 135

2.5

± 10

140

* 140 mm per TN215

A max 420

8.8

* 60

* 60 ±10

±10

8.3

10.8

11,5

1 740

TN211.

2040. 2040

TN214.

2195.

box kg / box 1 8, 1

20, 9 nickel 25 21 95 07nichelato 22, 3 tipo misura finitura

11,5

1740.

finitura finishing

box kg / box

1 740

1 8, 1

TN211.

2040. 2040 TN214. 8.3 nickel 25 2195. 21 95 07nichelato TN215. 10.8 2330. 2330

1740.

10.8 tipo misura A type measure

* 60

A ± 10 9

finitura finishing

A ±10

± 10

8.3

tipo misura A type measure

140

A = Interasse

± 10

* 135

2.5

±10

~ 1/3 Anta

* 135

7 1 fig.

7 A

A+43

8.8

A+43

75 N

* 135

11.5 - 0.2

2330

11.5 - 0.2

± 10

weight

± 10

±10

Peso 6 Nm

2.5

Max.

± 10

60 N

max 420 ±10

max 420

21.5

6 Nm

2.5

140

21.5

* 140 mm per TN215

Reaction

T+T

A+43

tag A doo lio a r cu misu ttin ra g ant a

60 N

8.8

Reazione 6 Nm

± 10

6 Nm

Nickel / Grey

8.8

21.5

nuovo interasse new distance

WS066.008.020

11.5

75 N

* 140 mm per TN215

WS066.008.019

NORMALLY ASSEMBLED ON WOODEN PANELS OR AGGLOMERATES AND HOLLOW WOOD PANELS. FIXING WITH SCREWS. 0 MINIMUM THICKNESS43 16. CENTRE DISTANCE: MINIMUM 1200 - 0.2 32 MAXIMUM 2800

6 Nm

BOX

25 Recessed wardrobe adjusters TN211 TN213 TN214 TN215 type

A = interasse A = distance

60 N

A (mm)

0 - 0.2 NORMALLY ASSEMBLED ON Nickel / Grey WS066.008.017 IN CASE OF SLIDING DOOR MECHANISM, THE DOOR HAS MORE1740 BENDING IN WOODEN PANELS OR AGGLOMERATES HOLLOW THE UPPERAND PART ( fig. 1 ). WOOD PANELS. Nickel /CAN GreyBE CUT, IN CASE OF2040 FIXING WITH THE SCREWS. WS066.008.018 ONLY LOWER PART OF THE DOOR USAGE OF A MINIMUM THICKNESS 16. WARDROBE ADJUSTER CENTRE DISTANCE: MINIMUM 1200WITH SMALLER PATTERN ( pic.2 ), OF NECESSARY. MAXIMUM 2800 Nickel / Grey 2195

INTERASSE MIN 1200 MAX 2800

4 6 Nm

FINISHING omm@omm.name

tel. 0362.622377TN214 TN215 Tenditore da incasso tipo TN21111.5TN213 2° PROCEDURE POSSIBILITY

NORMALMENTE ASSEMBLATI SU PANNELLI DI LEGNO O AGGLOMERATI E TAMBURATI. FISSAGGIO CON VITI. SPESSORE MINIMO 16. INTERASSE MIN 1200 MAX 2800

5,5

9,5

WOODEN PANELS OR AGGLOMERATES AND HOLLOW WOOD PANELS. FIXING WITH SCREWS. MINIMUM THICKNESS 16. CENTRE DISTANCE: MINIMUM 1200 MAXIMUM 2800

tipo misura

finitura

20, 9

FURNITAL 22, 3 23, 5

box kg / box

MINIMO 16. 1°SPESSORE PROCEDURE POSSIBILITY INTERASSE MIN 1200 MAX 2800 A) WARDROBE ADJUSTER CUTTING ASSEMBLED ON B)NORMALLY DOOR CUTTING

Tenditore da incasso tipo TN211 TN213 TN

TECHNICAL HARDWARES | STRAIGHTENERS

Recessed wardrobe adjusters TN211 TN213 TN Tenditore da incasso tipo TN211 TN213 TN214

STRAIGHTENERS WITH ADJUSTMENT Recessed Tenditore daTOPincasso tipo wardrobe TN211adjusters TN213 TN211TN214 TN213 TN214T NORMALMENTE ASSEMBLATI SU PANNELLI DI LEGNO O AGGLOMERATI E TAMBURATI. FISSAGGIO CON VITI. SPESSORE MINIMO 16. INTERASSENORMALMENTE MIN 1200 MAXASSEMBLATI 2800 SU

Recessed wardrobe adjusters TN211 TN213 TN214 T PANNELLI DI LEGNO O

FINISHING

A (mm)

BOX

Tenditore da incasso tipo TN211 TN213 TN2141740TN215 Nickel / Grey

Recessed wardrobe adjusters TN211 TN213 TN214 TN215 type

WS066.008.009

Nickel / Grey

2195

WS066.008.010

Nickel / Grey

2330

8.8

21.5

2.5

* 135

0 11.5 - 0.2 * 135

60 N

2.5

8.8

11.5 - 0.2

60 N

21.5

* 135

140

± 10

±±10 10

± 10

11.5 - 0.2

2.5

* 140 mm per TN215

± 10

±10

8.80

±10 ±10

± 10

7 7

8.8

* 60

8.3

Recessed2.5wardrobe adjusters TN211 TN213 TN 10.8 8.3 35

PANNELLI DI LEGNO O AGGLOMERATI E TAMBURATI. FISSAGGIO CON VITI. SPESSORE MINIMO 16. 43 INTERASSE MIN 1200 MAX 60 N 322800

* 135

±10

21.5

6 NmNORMALMENTE ASSEMBLATI SU

* 60

Recessed wardrobe adjusters TN211 TN213 TN214 TN21 Tenditore da incasso tipo TN211 TN213 TN

max 420

2.5

Tenditore da incasso tipo TN211 TN213 TN214 TN2

43 75 N

A+43

A A+43

21.5

A+43

75 N 75 N

NORMALLY ASSEMBLED ON WOODEN PANELS OR AGGLOMERATES AND HOLLOW WOOD PANELS. 6 Nm FIXING WITH SCREWS. MINIMUM THICKNESS 16. CENTRE DISTANCE: MINIMUM 1200 MAXIMUM 2800

8.8

43 32

max 420

NORMALMENTE ASSEMBLATI SU PANNELLI DI LEGNO O AGGLOMERATI E TAMBURATI. NVITI. FISSAGGIO60 CON SPESSORE MINIMO 16. INTERASSE MIN 1200 MAX 2800

± 10

Recessed wardrobe adjusters TN211 TN213 TN214 TN215 type 6 Nm 6 Nm

6 Nm

* 60

Tenditore da incasso tipo TN211 TN213 TN214 TN215

6 Nm

NORMALLY ASSEMBLED ON WOODEN PANELS OR AGGLOMERATES AND HOLLOW WOOD PANELS. FIXING WITH SCREWS. MINIMUM THICKNESS 16. CENTRE DISTANCE: MINIMUM 1200 MAXIMUM 2800

11.5 - 0.2

140

2040

±10

WS. SS 16. : MINIMUM 1200

Nickel / Grey

max 420

BLED ON OR ND HOLLOW

FIXING WITH SCREWS. WS066.008.008 MINIMUM THICKNESS 16. CENTRE DISTANCE: MINIMUM 1200 MAXIMUM 2800

* 140 mm per TN215

NORMALMENTE ASSEMBLATI SU PANNELLI DI LEGNO O AGGLOMERATI E TAMBURATI. FISSAGGIO CON VITI. SPESSORE MINIMO 16. INTERASSE MIN 1200 MAX 2800

11.5 - 0.2

* 140 mm per TN215

SSEMBLATI SU OO AMBURATI. TI. 16. 00 MAX 2800

* 140 mm per TN215

TAMBURATI. NORMALLYAGGLOMERATI ASSEMBLEDEON FISSAGGIO CON VITI. WOODEN PANELS OR SPESSORE MINIMO 16. AGGLOMERATES AND HOLLOW ITEM INTERASSE MIN 1200 MAX 2800 WOOD PANELS. FIXING WITH SCREWS. NORMALLY ASSEMBLED ON MINIMUM THICKNESS 16. WOODEN PANELS OR WS066.008.007 CENTRE DISTANCE: MINIMUM AGGLOMERATES AND1200 HOLLOW WOOD PANELS. MAXIMUM 2800

1 8, 1 finitura box kg 20, 9/ box finishing 07nichelato nickel 25

± 10

10.8

box kg / box * 60

misura SPESSORE MINIMOtipo 16. TN211. INTERASSE MIN 1200 MAX 2800 2040. 2040

± 10

21.5

AGGLOMERATES AND HOLLOW WOOD PANELS. FIXING WITH SCREWS. NmMINIMUM THICKNESS 16. CENTRE DISTANCE: MINIMUM 1200 MAXIMUM 2800

finitura finishing

* 135

max 420

ditore da incasso tipo TN211 TN213 TN214 TN215 tipoSU misura NORMALMENTE ASSEMBLATI PANNELLI DI LEGNO O

type measure ASSEMBLED ON AGGLOMERATI E TAMBURATI. CUTTABLE NORMALLY STRAIGHTENERS WITH TOP ADJUSTMENT WOODEN PANELS OR 1740. 1 740 FISSAGGIO CON VITI.

TN215.

2330. 2330

type measure 23, 5

1740. 11,5 1 740

TN211.

2040

* 135

140

* 140 mm per TN215

A ± 10

max 420

* 60

21.5

± 10

* 135

8.3 10.8

8.3

tipo misura A type measure

finitura finishing

1740. 1 740 finitura box kg / box finishingTN211. 2040. 2040 TN214. TN215.

TN213.

finitura finishing

10.8

box kg / box 1 8, 1

nickel 25 2195. 1 8, 121 95 07nichelato 2330. 2330

20, 9

± 10

tipo misura 20, 9 A 07 nichelato nickel type25 measure

nickel 25 22, 3 finitura TN214. 2195. 21 95 07nichelato tipo misura A box TN215. 2330.kg 2330 / box type measure 23, 5 finishing 2040. 2040

± 10

11,5

2040. 2040

± 10

8.8

23,5

1 8, 1

20, 9 nickel 25 21 95 07nichelato 22, 3 tipo misura

tipo misura A FURNITAL type measure

20,9

10.8

2195.

finituraes./e.g.: TN211.2040.07 box kg / box2.5 finishing * 135

2040. 2040

TN214.

max 420

07 nichelato nickel 25

8.3

box kg / box

2330.

2330

finitura finishing

es./ e.g.: TN211.2040.07

22, 3 23, 5

box kg / box

07 nichelato nickel 25

box kg / box

20, 9

2330

23, 5

±10

2040

2330.

1 740

TN211.

max 420

21.5 ± 10

2040.

finitura finishing

22, 3

* 60

2330. 2330

20, 9

nickel 21 95 07nichelato 7 25

8.8

tipo misura www.omm.name A omm@omm.name type measure tel. 0362.622377

8, 1 75 1N

20,9 23,5

TN215.

TN213.

box kg / box

11.5 - 0.2

2.5

±10 mm per TN215 ± 10 * 140

2195.

10.8

2.5

23,5

±10

TN214.

8.8 20,9 35

11.5 - 0.2

±10

2040. 2040

8.3

TN211.

kg / box2330

23,5

A+43

finitura finishing

tipo misura A type measure

2040.

60 N

1 740

A+43

11,5

1740.

23,5

20,9

6 Nm

75 N

2040

20,9

es./ e.g.: TN211.2040.07

tipo misura A type measure

TN213.

±10

box kg / box 21.5

BOX

23, 5

07 nichelato nickel 25

2330

A (mm)

22, 3

box kg / box

±10

2195.

± 10

www.omm.name omm@omm.name 6 tel. 0362.622377

1740.

2330.

20, 9

2040. 2040

finishing32 2040. 2040www.omm.name TN213. 07 nichelato nickel 25 omm@omm.name 2330. 2330 tel. 0362.622377

23, 5

finitura 20, 9 tipo misura A Nickel / Grey box WS066.008.012 es./ e.g.:finishing TN211.2040.07 nickel 25 21 95 07nichelato 22, 3type measure www.omm.name 2040. 2040 TN215. 2330. 2330 23, 5 omm@omm.name nichelato nickel 25 6 Nm TN213. 2330. 2330 07 tel. 0362.622377 tipo misura finitura43 TN211.

6 Nm TN214.

60measure N type

WS066.008.011 TN213.

1 8, 1

max 420

1 8, 1

11.5 - 0.2

22, 3

* 60

1740.7 1 7470

±10

21 95

140A

A+43

tipo misura A type measure

A+43

11,5

2195.

11,5 8.3 NORMALLY ASSEMBLED ON 1740. 1 7 40 WOODEN PANELS OR TN215. 2330. 2330 AGGLOMERATES TN211. AND HOLLOW 10.8 2040. 20 40 WOOD PANELS. FIXING WITH SCREWS. TN214. nichelato nickel ITEM tipo 2195. 21 95 07FINISHING misura finitura 11,5 MINIMUM THICKNESS 16. A finitura type measure finishing CENTRE DISTANCE: MINIMUM 1200 TN215. 2330. 23307 box kg / box 7 MAXIMUM 2800 7 finishing 2040. 2040 Nickel / Grey

±910

75 N

± 10

essed wardrobe adjusters TN211 TN213 TN214 TN215 type typeTN214. measure

00 iesSeries

TECHNICAL HARDWARES | STRAIGHTENERS

HIDDEN WARDROBE STRAIGHTENERS

GENERAL FEATURES: TORSION FORCE: 2N HORIZONTAL FORCE: 100N (test report on panel dimension 2500 x 460 x 20) MINIMUM DOOR THICKNESS 12MM

Tenditore a scomparsa tipo TN421 - TN423 TN403 Hidden wardrobe adjuster TN421 - TN423 type

Tenditore a Tenditore scomparsaa tipo TN421 - tipo TN423 scomparsa TN421 wardrobe TN421 - TN423 type- T aHidden scomparsa tipo TN421 - TN423 Hiddenadjuster wardrobe adjuster TN421 ura mis

Nickel / Grey

2010

WS066.009.005 TN421 Nickel / Grey

261 0

±6

2610.

2760. 2760 misura

00grezzoraw 25

1 9,3

20,5 tipo misura 21 ,6 type measure A 1700.

1 700

2010.

201 0

735

4,1

TN421 1 8,2

tagliabile cuttable -

regolazione

1 6,2

TN421.

finitura

±6

4,1 kg / box 20 1 4,2

TN423

7 35

4,1

TN423

TN421

TN423 7

finitura

finishing kg / box tipo box misura 1 4,2 type measure A 1 6,2 TN421. 1700. 1 700

finitura

FURNITAL

finishing

box

kg / box 1 4,2

7 min 12

2450. 2450

agliabile cuttable -

2300. 2300

box

TN423 7

0 M5 x 42010

201 0

finishing

finitura

misura

2010.

tipo

es.4 150 N

TN423

500x460x20type measure A 460x20 TN421. 1700. 1 700

es.4

4,1 test agglomerato 2500x460x28 panel test 2500x460x28 20 test agglomerato 2500x460x28 35 panel test 7 2500x460x28

TN421 tipo

min 12

150 N 4,1

ura mis

es.4

regolazione adjustment

4 Nm

±6

4 Nm

es.47

tagliabile cuttable -

100 N

7 41

test agglomerato 2500x460x20 panel test 2500x460x20 test agglomerato 2500x460x20 7 panel test 2500x460x20

00x460x28 60x28

es.4

M5 x 42010 10 adjustment

TN421

es.4

100 N

2 Nm

10 M5 x 42010

±6

2 Nm

tagliabile 41 cuttable

7 7

ra isu m a

2300lio g taTN423 r e p 2610 o in e ion vers s r ve table cu

Nickel / Grey

a lio tag r e p n ne sio sio ver ver table cu

BOX

10 M5 x 42010

60 min

TN421

Nickel / Grey

ura mis

60 min

FINISHING

WOODEN NES OR LS. SSEMBLY 00x460x20 N60x20 WOOD

a lio tag Aer(mm) p n ne sio sio ver ver table 1700 cu

60 min 41

TN421

NORMALMENTE UTILIZZATI SU PANNELLI DI LEGNO AGGLOMERATI DI LEGNO AGGLOMERATI ASSEMBLATI ESTERNAMENTE PANNELLI O IN ASSEMBLATI ESTERNAMENTE O IN TAMBURATI DI PICCOLO SPESSORE. TAMBURATI DI PICCOLO SPESSORE. INTERASSE MIN.1200 MAX.2800. INTERASSE MIN.1200 MAX.2800. TN423 NORMALLY USED ON WOODEN ITEM PANELS AGGLOMERATES OR NORMALLY USED ON WOODEN PANELS AGGLOMERATES OR HOLLOW WOOD PANELS. WS066.009.003 HOLLOW WOOD PANELS. RECOMMENDED FOR ASSEMBLY UNDER THE COVERS IN WOODRECOMMENDED FOR ASSEMBLY 7 UNDER THE COVERS IN WOOD VENEER. WS066.009.004 VENEER. es.4 SINGLE ADJUSTMENT. SINGLE ADJUSTMENT. es.4 MAXIMUM 2800 WS066.009.001 7 2800 7 MAXIMUM

60 min

STRAIGHTENERS WITH TOP NORMALMENTE UTILIZZATI SU

a lio tag per ion e s n sio ver ver table ADJUSTMENT cu

Amin 12

TN423

ZATI SU GGLOMERATI MENTE O IN O SPESSORE. AX.2800.

TN423

Tenditore Hidden wardrobe adjuster TN421 - TN423 35 35

TN421

OODEN S OR S. SEMBLY WOOD

TN421

regolazione adjustment

35 TN404

regolazione adjustment

ATI SU GLOMERATI ENTE O IN SPESSORE. X.2800.

TECHNICAL HARDWARES | STRAIGHTENERS

!?2>!?2B40860/!/<<6=:>:2!8:B2!'()*$,!!'()*$*!!'()*+, /1567840!9:8;!/<6=:>:6=!?2@40!'()*$,!!'()*$*!!'()*+,!8AB4

'4>1:8204!?2>!?2B40860/!/<<6=:>:2!8:B2!'()*$,!!'()*$*!!'()*+, ALUMINIUM COVER FOR HIDDEN STRAIGHTENERS

./010234!/1567840!9:8;!/<6=:>:6=!?2@40!'()*$,!!'()*$*!!'()*+,!8AB4

/0C'(!-(+%)"%+,,-.)")0% "0(.+,.'"!'%-!),)DD+!+%)"% +33)"+.'"+.'"!0%+)%!'"4)!0()% &'()'%!"#$$* +,-.)")-.%/01'(%"0(.+,,2% /0.3)"'4%5)!6%400(%+47-&!'(&% !"#$$%&'()'&*

NL!O!=

32M

AF*G A*?* H%!"+#$I*+*3I*3J*$$

Grey

1972

2662

2572

D+

Grey

L = A - 38

!K:>:7;:>L

K:>:860/

D, )

'()*+,J

'()*$*J!!

60 min 38

6.8

2.3

+,-.)")-.%/01'(%"0(.+,,2% /0.3)"'4%5)!6%400(%+47-&!'(&% !"#$$%&'()'&*

'()*$,J!!!!

"0(.+,.'"!'%-!),)DD+!+%)"% +33)"+.'"+.'"!0%+)%!'"4)!0()% &'()'%!"#$$*

6.2

8:B2!!!!!!!!! =:760/! = :760/! =:760/!

2610 /0C'(!-(+%)"%+,,-.)")0%

#$%& !!,*! ! $ !!!

60 min

!!"!!

2572

1662

'4>1:8204!?2>!?2B40860/!/<<6=:>:2!8:B2!'()*$,!!'()*$*!!'()*+, ./010234!/1567840!9:8;!/<6=:>:6=!?2@40!'()*$,!!'()*$*!!'()*+,!8AB4 6.8 !!+!!!!C!!

#$%&

!!"!! $ !!! '()*+,

2300

BOX

Grey

WS108.005.004

14 35

2010

2662

8AB4 = 4/7604 =4/7604 =4/7604

WS108.005.001

60 min

1972

L = A - 38

1700

A (mm)

1662

6.2

0.5 1.8 2.3

WS108.005.003

2.3 8.5 L (mm)

FINISHING

!!+!! WS108.005.002

!!+!!

ITEM 8.5

L (mm)

!!,*! ! $ !!! '()*$,!!'(*$*

2.3

A&'D)0"'%6>6

#$%&

6.8

!!,*! ! $ !!! '()*$,!!'(*$*

C!!

6.2

#$%&

6.2

#$%&

!!,*! ! $ !!! '()*$,!!'(*$* !!

#$%&

!!"!! $ !!! '()*+,

60 min

L = A - 38

60 min

#$%&

!!"!! $ !!! '()*+,

'()*+, 35

B2B

6.2

2.3

8.5

34.5

#$%&

PLASTIC GASKET !!"!! $ !!!

@8Q %%%%%%%%%%%%%%%%%%%%%%%%% !$$%?@APPE%% JR S ,+%8=EO<P*%=* %%=*%8=EO<PAO

123451675+8+ !"#$#%&'("$)*+,'#+

0/!/<<6=:>:2!8:B2!'()*$,!!'()*$*!!'()*+, 37.8 <6=:>:6=!?2@40!'()*$,!!'()*$*!!'()*+,!8AB4 H H

JR S ,+%8=EO<P*%=* %%=*%8=EO<PAO!!+!!

60 min

L = A - 38

38 B1 NL!O!=

D, )

60 min

14 35

123451675+8+ !"#$#%&'("$)*+,'#+

A 32M

&'D)0"'%6>6

!!"!!

D+

K:>:860/ !K:>:7;:>L

0.5 1.8 2.3

@8Q %%%%%%%%%%%%%%%%%%%%%%%%% !$$%?@APPE%% JR S ,+%8=EO<P*%=* %%=*%8=EO<PAO

*J!!

!!,*! ! $ '()*$,!!'( !!+!!

!!+!!!!C!!

!K:>:7;:>L

,J!!!!

K:>:860/

!!"!! $ !! '()*+,

C!!

123451675+8+ !"#$#%&'("$)*+,'#+

32M

NL!O!=

60 min

!!"!!

!!+!!!!C!!

K:>:860/

2!!!!!!!!! =:760/! = :760/! =:760/!

&'D)0"'%6>6

B4 = 4/7604 =4/7604 =4/7604

14 35

D+

AF*G A*?* H%!"+#$I*+*3I*3J*$$

6.2

0.5 1.8 2.3

A 60123451675+8+ min !"#$#%&'("$)*+,'#+

L = A - 38

60 min

38 38

!!"!!

2.3

'()*+,

!!+!!

#$%&

34.5 !!"!! $ !!!

#$%&

!!,*! ! $ !!! '()*$,!!'(*$*

6.2

0.5 1.8 2.3

37.8

6.8

60 min

8:B2!!!!!!!!! =:760/! = :760/! =:760/!

6.2

0.5 AF*G A*?* H%!"+#$I*+*3I*3J*$$1.8 6.2 2.3

!!"!!

8.5

!!+!!!!C!!

NL!O!= B2

32M

&'D)0"'%6>6 A

'("$)*+,'#+

)

K:>:860/ L = A - 38

'()*$*J!!

6.8

37.8

'()*$,J!!!!

8.5

34.5

8:B2!!!!!!!!! =:760/! = :760/! =:760/! &'D)0"'%6>6

'()*+,J

60 min B

!!!"#$$"%&$' #$$(#$$"%&$' )'*"+,-./".//-00

6.8

2.3

&'D)0"'%6>6

8AB4 = 4/7604 =4/7604 =4/7604

60 min

FURNITAL

14 35

!K:>:7;:>L A

=4/7604 8AB4 = 4/7604 =4/7604 B1 8:B2!!!!!!!!! =:760/! = :760/! =:760/!

6.2

38 @8Q %%%%%%%%%%%%%%%%%%%%%%%%% !$$%?@APPE%% JR S ,+%8=EO<P*%=* %%=*%8=EO<PAO

NL!O!=

32M

6.8

60 min

38 D+

14 @8Q %%%%%%%%%%%%%%%%%%%%%%%%% !$$%?@APPE%% JR S 35 ,+%8=EO<P*%=* %%=*%8=EO<PAO

A*?* *G H%!"+#$I*+*3I*3J*$$ &'D)0"'%6>6

1.8 2.3

6.2

#$%&

37.8

60 0.5

34.5

2610

D+

!K:>:7;:>L

!!"!!

4 =4/7604

2300

!!+!!!!C!!

K:>:860/

37.8

123451675+8+ !"#$#%&'("$)*+,'#+

=:760/!

34.5

WS108.003.001

)

'()*$,J!!!!

2010

34.5

'()*$*J!!

1700

'()*+,J

60 min

AF*G A*?* H%!"+#$I*+*3I*3J*$$ B2 (mm)

6.2

B1 (mm)

L = A - 38 @8Q %%%%%%%%%%%%%%%%%%%%%%%%% !$$%?@APPE%% B1 B2 A JR S ,+%8=EO<P*%=* %%=*%8=EO<PAO 38 38

!!"!! $ !!! AF*G A*?* H%!"+#$I*+*3I*3J*$$

A (mm)

WS108.003.002

WS108.003.004

D+

!! D,C!!

!!!"#$$"%&$' #$$(#$$"%&$' )'*"+,-./".//-00

)

#$%&

!!+!! WS108.003.003

123451675+8+ !"#$#%&'("$)*+,'#+

L = A - 38

60 min

!!+!!!!C!! B1

C!!

!!"!!

60 min

!!"!!

'()*+,J

AF*G A*?* H%!"+#$I*+*3I*3J*$$8.5

&'D)0"'%6>6

BOX

2130

!!!"#$$"%&$' #$$(#$$"%&$' )'*"+,-./".//-00

!!,*! ! $ !!!

ITEM '()*$,!!'(*$*

#$%&

0.5L (mm) 1.8 1820 2.3

!!"!! $ !!! Aluminium '()*+,

'()*+, 8:B2!!!!!!!!! K:>:860/ =:760/! = :760/! =:760/! !!!"#$$"%&$' NL!O!= 35 32M =4/7604 =4/7604 !K:>:7;:>L 8AB4 = 4/7604 #$$(#$$"%&$' #$%& #$%& !!,*! ! $ !!! )'*"+,-./".//-00 !!"!! $ !!! 37.8 '()*$,J!!!! '()*$,!!'(*$* @8Q %%%%%%%%%%%%%%%%%%%%%%%%% !$$%?@APPE%% '()*+, D+ JR S ) D, '()*$*J!! ,+%8=EO<P*%=* %%=*%8=EO<PAO '()*+,J !!+!! #$%& 6.2 !! C!! 2.3

+,-.)")-.%/01'(%"0(.+,,2% Aluminium /0.3)"'4%5)!6%400(%+47-&!'(&% 6.2 !"#$$%&'()'&*

0.5 #$%& 8:B2!!!!!!!!! K:>:860/ Aluminium =:760/! = :760/! =:760/! 6.2 2.3 2420 WS108.003.001 !!,*! ! $ !!! 32M NL!O!= 1.8 !K:>:7;:>L 8AB4 = 4/7604 =4/7604 =4/7604 '()*$,!!'(*$* 8.5 '()*$,J!!!! Aluminium 2730 6.2 WS108.003.004 2.3 !$$%?@APPE%% @8Q %%%%%%%%%%%%%%%%%%%%%%%%%

6.8

/0C'(!-(+%)"%+,,-.)")0% "0(.+,.'"!'%-!),)DD+!+%)"% FINISHING +33)"+.'"+.'"!0%+)%!'"4)!0()% &'()'%!"#$$*

WS108.003.003

'()*$*J!!

37.8

14 35

H WS108.003.002

34.5

!!+!!!!C!!

&'D)0"'%6>6

+,-.)")-.%/01'(%"0(.+,,2% /0.3)"'4%5)!6%400(%+47-&!'(&% !"#$$%&'()'&*

ITEM

123451675+8+ !"#$#%&'("$)*+,'#+

14 35

37.8

/0C'(!-(+%)"%+,,-.)")0% "0(.+,.'"!'%-!),)DD+!+%)"% +33)"+.'"+.'"!0%+)%!'"4)!0()% &'()'%!"#$$*

34.5

!!+!!

B40860/!/<<6=:>:2!8:B2!'()*$,!!'()*$*!!'()*+, '()*$,!!'(*$* ALUMINIUM COVER FOR '4>1:8204!?2>!?2B40860/!/<<6=:>:2!8:B2!'()*$,!!'()*$*!!'()*+, 8.5STRAIGHTENERS H '4>1:8204!?2>!?2B40860/!/<<6=:>:2 &'D)0"'%6>6 ./010234!/1567840!9:8;!/<6=:>:6=!?2@40!'()*$,!!'()*$*!!'()*+,!8AB4 0!9:8;!/<6=:>:6=!?2@40!'()*$,!!'()*$*!!'()*+,!8AB4 ./010234!/1567840!9:8;!/<6=:>:6=!?2

TECHNICAL HARDWARES | STRAIGHTENERS

STRAIGHTENERS WITH TOP OR BOTTOM ADJUSTMENT

GENERAL FEATURES: TORSION FORCE: 6N HORIZONTAL FORCE: 60N (test report on panel dimension 2500 x 400 x 20) ADJUSTMENT RANGE: +/- 10MM MINIMUM DOOR THICKNESS 16MM

=.4.003--3!1!23/15-<5.!/15!-1>8?-35?!.8!?>2.773 =.4.003--3!1!23/15-<5.!/15!-1>8?-35?!.8!?>2.773 ,-./01!23415!635!51217718!9.5853:1!.8;<7-15 ,-./01!23415!635!51217718!9.5853:1!.8;<7-15

CUTTABLE STRAIGHTENER WITH TOP ADJUSTMENT

ITEM

FINISHING

A (mm)

WS066.003.003

Nickel / Grey

2300

(34 (34 BOX (34 (34

01-20 01-20 01-20 01-20

Ø4 Ø4

2.6 2.6

28 28 43 43

DC!E! DC!E! /27E /27E /27E /27E -?/3!!!!!!!!!!! -?/3!!!!!!!!!!! 6?>?-<5.!!!!!!!!!!!! 6?>?-<5.!!!!!!!!!!!! BOX -A/1 -A/16?>?7B?>C 6?>?7B?>C "###/F "###/F /.2D /.2D :3G:3G

ITEM

HIJ#"%I HIJ#"%I )) '#56#67' )) '#56#67' '#5!8 '#5!8*9. *9. *,, *,,:,,, :,,, 100

WS108.002.001

!$"% !$"% &'("),*/".. !"#"&'("),*/".. !"#"

!!%&'#!!

!!"#!!

!!%&'#!! !!"#!!

!!")!!!!")!!

!!@!!!!@!!

FURNITAL

PLASTIC PLATE FOR GASKET

()*+,$-./-0 TECHNICAL HARDWARES | STRAIGHTENERS

ALUMINIUM STRAIGHTENERS FOR REDUCED THICKNESS

allen key - 4

ITEM

FINISHING

L (mm)

CUTTABLE (mm)

BOX

WS066.007.001

Anodized Aluminium

2300

300

100

WS066.007.002

Anodized Aluminium

2600

300

100

=8150;648!3--./0106!;0?6!<=%'" ,-./010./!23454678!359.:;84!<=%'"!;>?8

10 22.8 24.8

7.5

0.5

2 0.7

2.7

1.2

6.8

Ø7.5

967;/&65&69&<49/.&17&5=/&82106:/& 524;5617&47.&;1382/99617& ;17;/85-&5=/&4;5>4:& ./012345617&./8/7.9&17&659& 847/:)

0.7

0.5

/99/7.1&<49451&9>:&;17;/551& .6&524G617/&/&;1382/99617/&./:& 82106:1&:4&2/4:/&./01234G617/& .68/7./&.4:&2/:456H1&8477/::1)

10 23

FURNITAL

!!@,A!('#!!

Minimum door thickness 10mm

TECHNICAL HARDWARES | STRAIGHTENERS

ALUMINIUM STRAIGHTENERS FOR MULTI-SECTION DOORS

allen key - 4

straighteners

cuttable part up to 400mm

screw M8x15

3.&+%1,*.')""#$%&%,'1%8,'23456 !"#$%&%#$'()*+*,-.')+/#01.*'23456'178. 21

6.9

9.8

3.2 13.5

Ø4

8.5

5.2

1.2

8.5

3.2

1.2

4.6

16.8

23.1

39.8

16.9

6>## ##

!!$6!!

!! !! $

C%!F! "!+/A)1*B%C*

9.C9!F! 6!+/A)1*B%C*

!!7!!

JN3K OKPNO

FURNITAL

TECHNICAL HARDWARES | STRAIGHTENERS

'/46174!8/90:/.05!1/2.!%&'&(")$!! '/46174!8/90:/.05!1/2.!%&'&(")$!! -./01!23415!%&'&(")$ -./01!23415!%&'&(")$ !1;25!!!! !1;25!!!! ITEM

FINISHING

L (mm)

CUTTABLE (mm)

BOX

WS068.001.043

Raw Aluminium

2200

400

WS068.001.039

Raw Aluminium

2600

400

METAL CONNECTING PLATE FOR DOOR SECTIONS )*+*&'( )*+*&'( !"#$%&'( !"#$%&'(

;

!!"!!

ITEM !!!"#$$"%&$' !!!"#$$"%&$' #$$(#$$"%&$' #$$(#$$"%&$' )'*"+,-./".//-00 )'*"+,-./".//-00

%&'&(")$&(% %&'&(")$&(%

;

!!$#!! !!"#!!

!!+,#!!

!!"#!!

!!+,#!!

!!$#!!

;

!!$#!!

"!!

!!"!!

!!$#!!

"!!

!!"*!! !!#=!!

122344567+8+ !""#$$%&'#$

!!"*!! !!#=!!

!!"!!

32 142

32 50

!!+)!!

!!<=!!

142 52

=-,>(?-@? =-,>(?-@? !!<=!!

122344567+8+ !""#$$%&'#$

;

$!-3 !!+)!!

$!-3

16789:6&;<; 16789:6&;<;

1/2.!!!!!!!!! 1/2.!!!!!!!!! >/0/1974!!!!!!!!!!!! >/0/1974!!!!!!!!!!!! 1;25 1;25 >/0/6? >/0/6? @.A @.A B8!C!@.A B8!C!@.A %&'&(")$& %&'&(")$& !""!.#*.*A !""!.#*.*A &&.#$B+** &&.#$B+** #$D# #$D# %&'&(")$&(% %&'&(")$&(%

WS068.002.002

BOX 100

$!-/$-.- 0&1-2-,345-33 $!-/$-.- 0&1-2-,345-33

FLAT HEAD SCREW

FURNITAL

ITEM

THREAD

LENGTH (mm)

BOX

WS068.002.001

500

_01.4

INVISIBLE SHELF BRACKETS

_01.1 Hanging brackets _01.2 Levelers _01.3 Straighteners _01.4 Invisible shelf brackets _01.5 Push latches

FURNITAL

TECHNICAL HARDWARES | INVISIBLE SHELF BRACKETS

CONCEALED SHELF SUPPORT FOR CONCRETE WALL

C A

Ø1

ITEM

Ø1 (mm)

A (mm)

B (mm)

C (mm)

K (mm)

Ø (mm)

LOAD CAP. (Kg)

BOX

SB033.002.006

120

1.5

100

SB033.002.009

140

1.5

100

SB033.002.010

165

1.5

100

SB033.002.004

120

1.0

200

SB033.002.011

1.0

200

SB033.002.003

100

1.0

200

SB033.002.002

1.0

200

SB033.002.001

200

1.5

100

SB033.002.008

145

1.0

200

SB033.002.007

140

1.0

200

FURNITAL

TECHNICAL HARDWARES | INVISIBLE SHELF BRACKETS

CONCEALED SHELF SUPPORT FOR CONCRETE WALL WITH NYLON ADJUSTMENT

ITEM

MEASURE (mm)

BOX

SB033.006.001

Ø14 x 140

100

+/- 2mm

Ø14

+/- 2mm 70

140

CONCEALED SHELF SUPPORT FOR CONCRETE WALL WITH STEEL ADJUSTMENT

+/- 2.mm

ITEM

A (mm)

B (mm)

DIAMETER (mm)

BOX

SB033.002.023

120

100

SB033.002.015

145

100

SB033.002.016

170

125

100

+/- 2.5mm B A

FURNITAL

TECHNICAL HARDWARES | INVISIBLE SHELF BRACKETS

CONCEALED SHELF SUPPORT FOR CONCRETE WALL WITH STEEL ADJUSTMENT

ITEM

A (mm)

B (mm)

DIAMETER (mm)

BOX

SB033.002.025

120

100

SB033.002.019

145

100

SB033.002.020

170

125

100

+/- 2.mm

B A

+/- 2.5mm

CONCEALED SHELF SUPPORT FOR SHELF DEPTH UP TO 450MM WITH STEEL ADJUSTMENT

+/- 6mm

ITEM

A (mm)

B (mm)

DIAMETER (mm)

BOX

SB033.003.005

220

145

SB033.003.006

350

275

+/- 4mm

+/- 2.5mm 9

200 300N

B A

FURNITAL

TECHNICAL HARDWARES | INVISIBLE SHELF BRACKETS

CONCEALED SHELF SUPPORT WITH BACK PLATE H. 19MM AND STEEL ADJUSTMENT

+/- 5mm

ITEM

A (mm)

B (mm)

DIAMETER (mm)

BOX

SB033.003.007

120

100

SB033.003.001

150

105

100

SB033.003.002

175

130

100

+/- 2.5mm

150 100N B A

CONCEALED SHELF SUPPORT WITH BACK PLATE H. 24MM AND STEEL ADJUSTMENT

+/- 5mm

ITEM

A (mm)

B (mm)

DIAMETER (mm)

BOX

SB033.003.008

120

100

SB033.003.003

150

105

100

SB033.003.004

175

130

100

+/- 2.5mm

150 150N

B A

FURNITAL

_01.5

PUSH LATCHES

_01.1 Hanging brackets _01.2 Levelers _01.3 Straighteners _01.4 Invisible shelf brackets _01.5 Push latches

FURNITAL

TECHNICAL HARDWARES | PUSH LATCHES

ADJUSTABLE PUSH LATCH OPENING 14MM WITH COVER

With Bumper

Light Grey

100

JB039.008.005

Magnetic

Light Grey

100

JB039.007.006

With Bumper

Lead Grey

100

JB039.008.006

Magnetic

Lead Grey

100

JB039.007.007

With Bumper

White

100

JB039.008.007

Magnetic

White

100

JB039.007.008

With Bumper

Black

100

JB039.008.008

Magnetic

Black

100

16 mm

JB039.007.005

16 mm 16 mm

BOX

+/-3 mm+/-3 mm 15,5 mm15,5 mm 14 mm 14 mm60 mm 60 mm +/-3 mm 15,5 mm 14 mm 60 mm

REG

ABLE ST

ABLE TABLE ST S

FINISHING

ADJU

REG

SPECIFICATIONS

LABILE O

LABILE LABILE O O

REG

ITEM

Ø4,5 mm Ø4,5 Ø8mm mm Ø8 mm

ADJU ADJU

Ø4,5 mm Ø8 mm 22 mm 22 mm 14,5 mm14,5 mm 22 mm 14,5 mm

ADJUSTABLE PUSH LATCH OPENING 37MM WITH COVER

FINISHING

BOX

JB039.007.001

With Bumper

Light Grey

JB039.008.001

Magnetic

Light Grey

JB039.007.002

With Bumper

Lead Grey

JB039.008.002

Magnetic

Lead Grey

JB039.007.003

With Bumper

White

JB039.008.003

Magnetic

White

JB039.007.004

With Bumper

Black

JB039.008.004

Magnetic

Black

16 mm16 mm

SPECIFICATIONS

16 mm 16 16mm mm 16 mm

ABLE ST

ABLE TABLE ST S

ADJU

ADJU ADJU

ABLE TABLE ST S

ADJU

REG REG

REG

LABILE O

REG

LABILE O

ADJU ADJU

LABILE LABILE O O

REG

LABILE LABILE O O

REG

ITEM

+/-3 mm+/-3 mm 15,5 mm15,5 mm 14 mm 14 mm60 mm 60 mm +/-3 mm+/-3 mm +/-3 mm 15,5 15,5 mm mm15,5 mm 14 mm 89 mm6089 mm 37 mm 37 mm mm +/-3 mm Ø4,5 mm Ø4,5 Ø8mm mm Ø8 mm 15,5 mm 37 mm 89 mm Ø4,5 mmØ8 Ø8mm mm Ø4,5 mmmm Ø4,5 mm Ø8 22 mm 22 mm Ø4,5 mm Ø8 mm 14,5 mm14,5 mm 22 mm 22 mm 22 mm mmmm 32 mm 14,5 mm14,5 3214,5 22 mm 14,5 mm 32 mm

FURNITAL

TECHNICAL HARDWARES | PUSH LATCHES

ADJUSTABLE PUSH LATCH OPENING 16MM WITH BASE

with bumper

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.001.033

With Bumper

Light Grey

100

JB039.002.010

Magnetic

Light Grey

100

JB039.001.036

With Bumper

Lead Grey

100

JB039.002.015

Magnetic

Lead Grey

100

JB039.001.037

With Bumper

White

100

JB039.002.016

Magnetic

White

100

JB039.001.038

With Bumper

Black

100

JB039.002.017

Magnetic

Black

100

magnetic

ADJUSTABLE PUSH LATCH OPENING 39MM WITH BASE

with bumper

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.001.030

With Bumper

Light Grey

100

JB039.002.005

Magnetic

Light Grey

100

JB039.001.039

With Bumper

Lead Grey

100

JB039.002.018

Magnetic

Lead Grey

100

JB039.001.040

With Bumper

White

100

JB039.002.013

Magnetic

White

100

JB039.001.041

With Bumper

Black

100

JB039.002.014

Magnetic

Black

100

magnetic

FURNITAL

TECHNICAL HARDWARES | PUSH LATCHES

ADJUSTABLE PUSH LATCH OPENING 16MM

with bumper

magnetic

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.003.004

With Bumper

Light Grey

100

JB039.004.005

Magnetic

Light Grey

100

JB039.003.009

With Bumper

Lead Grey

100

JB039.004.010

Magnetic

Lead Grey

100

JB039.003.010

With Bumper

White

100

JB039.004.011

Magnetic

White

100

JB039.003.011

With Bumper

Black

100

JB039.004.012

Magnetic

Black

100

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.003.005

With Bumper

Light Grey

100

JB039.004.006

Magnetic

Light Grey

100

JB039.003.012

With Bumper

Lead Grey

100

JB039.004.013

Magnetic

Lead Grey

100

JB039.003.013

With Bumper

White

100

JB039.004.014

Magnetic

White

100

JB039.003.014

With Bumper

Black

100

JB039.004.015

Magnetic

Black

100

ADJUSTABLE PUSH LATCH OPENING 39MM

with bumper

magnetic

FURNITAL

TECHNICAL HARDWARES | PUSH LATCHES

PUSH LATCH OPENING 18MM WITH BASE

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.001.031

With Bumper

Light Grey

100

JB039.002.008

Magnetic

Light Grey

100

with bumper

magnetic

PUSH LATCH OPENING 39MM WITH BASE

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.001.032

With Bumper

Light Grey

100

JB039.002.009

Magnetic

Light Grey

100

with bumper

magnetic

FURNITAL

TECHNICAL HARDWARES | PUSH LATCHES

PUSH LATCH OPENING 18MM

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.003.001

With Bumper

Light Grey

100

JB039.004.001

Magnetic

Light Grey

100

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.003.002

With Bumper

Light Grey

100

JB039.004.002

Magnetic

Light Grey

100

with bumper

magnetic

PUSH LATCH OPENING 39MM

with bumper

magnetic

FURNITAL

TECHNICAL HARDWARES | PUSH LATCHES

ADJUSTABLE EMBEDDED STOPPER 25MM

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.003.008

With Bumper

Light Grey

200

JB039.004.009

Magnetic

Light Grey

200

ITEM

SPECIFICATIONS

FINISHING

BOX

JB039.003.003

With Bumper

Light Grey

500

JB039.004.003

Magnetic

Light Grey

500

ITEM

FINISHING

BOX

JB039.002.001

Zinc

500

ITEM

FINISHING

BOX

JB039.002.007

Nickel

250

with bumper

magnetic

EMBEDDED STOPPER 10MM

with bumper

magnetic

METAL PLATE FOR MAGNET WITH HOLE FOR SCREW

METAL PLATE FOR MAGNET WITH SELF ADHESIVE TAPE

FURNITAL

100

FURNITAL

_02 DECORATIVE HARDWARES

101

_02.1

SOFA AND CABINET LEGS

_02.1 Sofa and cabinet legs _02.2 Shelf brackets

102

FURNITAL

103

art.

205 Magic Aluminium

DECORATIVE HARDWARES | SOFA AND CABINET LEGS

Sistema | Patented Altezza brevettato 100 - 120 - 140 - 200 mm regolabile , altre misure asystem richiesta

Materiale zama Finitura grigio alluminio - cromato - altre a richiesta Altezzah 100 mm 100- -scatola 120 - 140 - 200 mm regolabile , altre misure a richiesta Confezione da 50 pezzi Materiale zama h 120 mm - scatola da 50 pezzi Altezza 100 120 - 140 - -200 mm regolabile misure a richiesta Finitu rah 140 mm grigio alluminio cromato - altre,aaltre richiesta - -scatola da 50 pezzi Materiale zama Confezione h 100 mm - scatola da 50 pezzi h 200 mm - scatola da 40 pezzi Finitura grigio alluminio - cromato - altre a richiesta h 120 mm - scatola da 50 pezzi Confezione h 100 140 mm - scatola da 50 pezzi h 120 200 mm - scatola da 50 40 pezzi HEIGHT (mm) FINISHING BOX h - scatola da 50 pezzi Height 100 - 120 140 - 140mm - 200 mm adjustable , other sizes on demand Material zamak h 200 mm - scatola da 40 pezzi

MULTIPOSITION LEGS Materiale: Zama Altezza: 100 - 120 - 140 - 200 mm, regolabile Materiale: Zama Finiture: Grigio Alluminio, Cromo Altezza: 100 - 120 - 140 - 200 mm, regolabile Materiale: Zama Confezione: h 100 - Scatola da 50 pz Finiture: Grigio Alluminio, Altezza: 100 - 120 - 140 - Cromo 200 mm, regolabile h 120 - Scatola da 50 pz Confezione: Grigio h 100 -Alluminio, Scatola da 50 pz Finiture: Cromo h 140 - Scatola da 50 pz 120 - Scatola da 50 pz Confezione: h 100 h 200 - Scatola da 10 pz 140 - Scatola da 50 pz h 120 200 - Scatola da 50 10 pz h 140 h 200 - Scatola da 10 pz

Material: Zamak Height: 100 - 120 - 140 - 200 mm, adjustable Material: Zamak Finishes: Aluminium Grey, Chrome Height: 100 - 120 - 140 - 200 mm, adjustable Material: Zamak Packaging: h 100 - 50 pcs box ITEM Finishes: Aluminium Height: 100 - 120 - Grey, 140 -Chrome 200 mm, adjustable h 120 - 50 pcs box Packaging:Finishes h 100 - 50grey pcs box Finishes: Grey, Chrome 100 Aluminium Aluminium 50 TL049.001.002 aluminium - chrome - other on demand 8| Height 100- -50 120 , other sizes on demand h 140 - h50 pcs box 100 mm pcs- 140 box- 200 mm adjustable 120 Packaging:Packaging h 100 50 Material zamak h 120-mm - 50pcs pcs boxbox Chrome TL049.001.001 h100 200 - h10 pcs box Height 100 120 mm adjustable other sizes on50 demand Finishes aluminium grey- -200 chrome - other ,on demand 140 mm - -50 pcs- 140 box 140 hMaterial 120 - zamak 50 pcs Packaging h 100 50box pcs box h 200 mm - 40mm pcs-box - chrome h 120 mm -grey 50 pcs box - other on demand 50 100 hFinishes Black TL049.001.009 200 - aluminium 10 140 50 pcs Packaging h 100 - 50box pcs box 140 mm h 120 200 mm - 50 40 pcs box 10 pcs box 120 h 200 - h Aluminium 50 TL049.001.004 140 mm - 50 pcs box

art. 205 Magic

Sistema brevettato | Patented system

h 200 mm - 40 pcs box

TL049.001.003

120

Chrome

TL049.001.010

120

Black

Aluminium

TL049.001.006

Art. 205 Magic

Sistema 140 brevettato Patented system

TL049.001.005

140

Chrome

TL049.001.011

140

Black

TL049.001.008

200

Aluminium

15 15

20 20

h 200 mm - 40 pcs box

300

250

20 20

350

100

99 32

Ø6

32 16è10un piedino che permette di essere montato in diverse posizioni e rispondere quindi a molteplici Il piedino 20532Magic, 6 esigenze in un’unica soluzione. 100

The 205 Magic foot is a foot that allows it to be mounted in different positions and therefore meet multiple needs in a single solution. Piedini | Feet

200

140

FURNITAL

25 50

h 100

h 120

Ø6

104

h 140

32 15

32 100

h 200

200 200

140 140

140

140 140

Material: Height: 20 100 - 120 - 140 - 200 mm, adjustable 20 Finishes: Aluminium Grey, Chrome 20pcs box Packaging: h 100 - 50 Height 100 - 120 - 140 - 200 mm adjustable, other sizes on demand 20pcs box hMaterial 120 - zamak 50 Finishes aluminium grey - chrome - other on demand hPackaging 140 - h50 pcs box 100 mm - 50 pcs box 120 mm - 50 pcs box h 200 - hh10 pcs box 140 mm - 50 pcs box 20 Zamak

200 20

140

100 - 120 - 140 -20 200 mm regolabile, altre misure a richiesta zama 20 grigio alluminio - cromato - altre a richiesta 20 h 100 mm - scatola da 50 pezzi h 120 mm - scatola da 50 pezzi 20 h 140 mm - scatola da 50 pezzi h 200 mm - scatola da 40 pezzi

200

15 15 Altezza Materiale Finitura Confezione

200 200

120 120

120

h 200 h 200

100 100

100

120

15 15

25 25 25

32 99 32 99

15 15

Zama 20 100 - 120 - 140 - 200 mm, regolabile 20 20 Finiture:32 32Grigio Alluminio, Cromo 20 16 10 Confezione: h 100 - Scatola da 50 pz 20 32 32 16 10 h 12020- Scatola da 50 pz Piedini | Feet 20 h 14020- Scatola da 50 pz Piedini | Feet h 200 - Scatola da 10 pz Piedini | Feet 16 10

h 140 h 140

15 15

100

25 50

Ø6

h 100 Materiale: hAltezza: 10032 32

h 120 h 120

Ø6

h 100

h 120

Ø6

h 140

15 15

h 200

100 100

32 100

120 120

32 100

Bronze, White, other on demand

50 50

16 15

9 32 32 9

32 100

25 25

Bronzo, Bianco, altre a richiesta

single solution. The 205 Magic single solution.

50 25 25

Il piedino 205 Magic, è un piedino che permette di essere montato in diverse posizioni e rispondere quindi a molteplici 200 Chrome 10 TL049.001.007 6 esigenze in un’unica soluzione. 100 200 TL049.001.012 Il piedino 205 Magic, è un piedino che permette di essere montato in diverse posizioni eBlack rispondere quindi a10molteplici Materiale: Alluminio Material: Aluminium 6 The Ilesigenze 205 Magic Altezza: A richiesta, fino ad che un massimo di di 350 mm montato Height: in diverse On demand, upetorispondere 350 mm max. in un’unica soluzione. piedino 205 Magic, è un piedino permette essere posizioni quindi a molteplici 100 6 Finiture: Grigio Alluminio, Nero, Marrone Scuro, Finishes: Aluminium Grey, Black, Dark Brown, single solution. esigenze in un’unica soluzione. 100 The 205 Magic

Materiale: Altezza: Materiale: Finiture: Altezza: Confezione: Finiture: Confezione:

Altezza Materiale Altezza Finitu ra Materiale Confezione Finitura Confezione

100 - 120 - 140 - 200 mm regolabile , altre misure a richiesta zama 100 120 140 200 mm regolabile misure a richiesta grigio alluminio - cromato - altre,aaltre richiesta zama h 100 mm - scatola da 50 pezzi grigio alluminio - cromato - altre a richiesta h 120 mm - scatola da 50 pezzi h 100 140 mm - scatola da 50 pezzi h 120 200 mm - scatola da 50 40 pezzi h 140 mm - scatola da 50 pezzi h 200 mm - scatola da 40 pezzi

Zama Material: Zamak 100 - 120 - 140 - 200 mm, regolabile Height: 100 - 120 - 140 - 200 mm, adjustable Zama Material: Zamak DECORATIVE HARDWARES | SOFA AND CABINET LEGS Grigio Alluminio, Cromo Finishes: Aluminium 100 - 120 - 140 - 200 mm, regolabile Height: 100 - 120 - Grey, 140 -Chrome 200 mm, adjustable h 100 Scatola da 50 pz Packaging: h 100 50 pcs box Grigio Alluminio, Cromo Finishes: Aluminium Grey, Chrome SistemaHeight brevettato | -Patented 100 - 120 - 140 200 mm adjustable , othersystem sizes on demand 120 - Scatola da 50 pz 120 - zamak h 100 Packaging: hMaterial 100 50 pcs box Height 100 - 120 - 140 mm adjustable other sizes on demand Finishes aluminium grey- -200 chrome - other ,on demand 140 - Scatola 140 - zamak h 120 daLEGS 50 pz hMaterial 120 50 pcs Packaging h 100 mm - 50box pcs box MULTIPOSITION HIGH Finishes - chrome h 120 mm -grey 50 pcs box - other on demand Materiale: Alluminio Material: Aluminium 200 - Scatola da 50 10 pz 200 - aluminium 10 h 140 hPackaging 140 50 pcs h 100 - 50box pcs box 140 mm h 120 mm - to 50 box mm max. 200up 40 pcs Altezza: A richiesta, fino ad un massimo di 350 mm Height: On demand, 350 h 200 - Scatola da 10 pz h 200 - h10 pcs box 140 mm - 50 pcs box 200 mm - 40 pcs box Dark Brown, Finiture: Grigio Alluminio, Nero, Marrone Scuro, Finishes: Aluminiumh Grey, Black, ITEM HEIGHT (mm) Bronzo, Bianco, altre a richiesta Bronze, White,FINISHING other on demand BOX

art.

205 Magic Aluminium

TL049.001.013

250

Aluminium

TL049.001.014

250

Black

TL049.001.015

300

Aluminium

TL049.001.016

300

Black

TL049.001.017

350

Aluminium

TL049.001.018

350

Black

Ø6

15 15

200 200

350

200 200

140 140

15 15

300

16 10

20 300

250

20 20

350

Piedini | Feet

100

Ø6

99 32

Piedini | Feet Piedini | Feet

140 140

20 120 120

16 10

250 100 100

20 20

Aluminium On demand, up to 350 mm max. Aluminium Grey, Black, Dark Brown, Bronze, White, other on demand

120 120

15 15

16 10

25 25 32

99 32

h 140

100 100

100

15 15

Ø6

h 100 h 100

h 120 h 120

Ø6

h 200 h 200

Material: Height: Finishes: h 140

32 100 32 16 10 Materiale: Alluminio 10 ad un massimo di 350 mm 32 32 16 fino Altezza: 100 A richiesta, Finiture: Grigio Alluminio, Nero, Marrone Scuro, Bronzo, Bianco, altre a richiesta

15 15

25 25

9 32 32 9

single solution. The 205 Magic single solution.

50 50

25 25

Il piedino 205 Magic, è un piedino che permette di essere montato in diverse posizioni e rispondere quindi a molteplici un’unica Ilesigenze piedino in 205 Magic,soluzione. è un6 piedino che permette di essere montato in diverse posizioni e rispondere quindi a molteplici 100 6 esigenze in un’unica soluzione. 100 The 205 Magic

16 10

Piedini | Feet

FURNITAL

105

Finiture: Finiture: Grigio GrigioAlluminio, Alluminio,Cromo, Cromo,Nero, Finishes: Finishes: Aluminium AluminiumGrey, Grey,Chrome, Chrome,Black Blac 10 | Nero, Zamak altre altrea arichiesta richiesta other otheronondemand demand 100 - 140 - 200 mm, adjustable Confezione: Confezione:h h100 100- Scatola - Scatoladada4040pzpz Packaging: Packaging: h h100 100- 40 - 40pcs pcsbox box Aluminium Grey, Chrome, Black Matt, hDECORATIVE HARDWARES | SOFA AND CABINET LEGS h140 140- Scatola - Scatola dada3030pzpz h h140 140- 30 - 30pcs pcsbox box other on demand h h200 200- Scatola - Scatoladada2020pzpz h h200 200- 20 - 20pcs pcsbox box g: h 100 - 40 pcs box h 140 - 30 pcs box h 200 - 20RECTANGULAR pcs box LEGS

204 204

art. art.

HEIGHT (mm)

FINISHING

BOX

TL049.002.035

100

Aluminium

TL049.002.038

100

Chrome

TL049.002.036

140

Aluminium

TL049.002.039

140

Chrome

TL049.002.037

200

Aluminium

TL049.002.040

200

Chrome

50 50

200 200

70 70 7 7

70 70

ITEM

140 140

100 100

32 32

200

Material: Zamak 7 7 Height: - 120 - 140 - 200 mm, adjustable Material: 90 Zamak Finishes: Aluminium Dark Brown, Height: 90 - 120Grey, - 140Chrome, - 200 mm, adjustable other on demand Finishes: Aluminium Grey, Chrome, Dark Brown, Packaging: h 90 - 100 box other onpcs demand h 120 -70 pcs box Packaging: h 90 - 100 pcs box h 140 - 70 pcs box h 120 -70 pcs box h 200 - 50 pcspcs boxbox h 140 - 70 h 200 - 50 pcs box

ITEM

HEIGHT (mm)

FINISHING

BOX

TL049.002.016

Aluminium

100

TL049.002.015

Chrome

100

TL049.002.018

120

Aluminium

TL049.002.017

120

Chrome

TL049.002.020

140

Aluminium

TL049.002.019

140

Chrome

TL049.002.022

200

Aluminium

TL049.002.021

200

Chrome

22 9

90 32

140 22

140

22 120

120

140

Piedini | Feet Piedini | Feet

106

FURNITAL

200

32 3290

9 9

22 9

120

Zamak Materiale: Zama 90 - 120 - 140 - 200 adjustable Altezza: 90mm, - 120 - 140 - 200 mm, regolabile Materiale: Zama 32 32 Aluminium Grey, Chrome, Dark Finiture: Grigio Alluminio, Marrone Scuro, Altezza: 90 - 120 -Brown, 140Cromo, - 200 mm, regolabile other onFiniture: demand altre a richiesta Grigio Alluminio, Cromo, Marrone Scuro, h 90 Confezione: - 100 pcs box h 90 - Scatola da 100 pz altre a richiesta h 120 -70 pcs box h 120 Scatola pz pz Confezione: h 90 - Scatoladada70100 h 140 - 70 pcs box h 140 Scatola da 70 pz pz Piedini Piedini | Feet | Feet 120 - Scatola da 70 SQUAREhLEGS h 200 - 50 pcs box h 200 - Scatola da da 50 70 pz pz h 140 - Scatola h 200 - Scatola da 50 pz

Altezza:

Height:

100 - 120 - 140 - 200 mm, regolabile

100 - 120 - 140 - 200 mm, adju

Materiale: Zama Material: Zamak Finiture: 100 -Grigio Alluminio, Cromo, altre a richiesta Finishes: Grey, Chrome, other Altezza: 120 - 140 - 200 mm, regolabile Height: 100 - 120 - 140 Aluminium - 200 mm, adjustable Materiale: Zama Material: Zamak Confezione: h 100 Scatola da 100 pz Packaging: h 100 100 box Finiture: Grigio Alluminio, Cromo, altre a richiesta Finishes: Aluminium Grey, Chrome, otherpcs on demand DECORATIVE HARDWARES | SOFA AND CABINET LEGS Altezza: 100 120 140 200 mm, regolabile Height: 100 120 140 200 mm, adjustable Confezione: h 100 Scatola da 100 da pz 70 pz Packaging: h 100 - 100 pcshbox h -120 - Scatola 120 - 70 pcs box Finiture: Alluminio, Cromo, altre a richiesta Finishes: h Aluminium Grey, Chrome, other on demand h Grigio 120 Scatola da 70 pz 120 70 pcs box h 140 - Scatola da 70 pz h 140 - 70 pcs box Confezione:h h140 100- Scatola - Scatoladada70100 pz Packaging: h 100 100 pcs box pz h 140 - 70 pcs box h 200 Scatola da 50 pz h 200 120- Scatola - Scatoladada5070pzpz 120- 50 - 70pcs pcsbox box - 50 pcs box h h200 h h200 OVAL LEGS h 140 - Scatola da 70 pz h 140 - 70 pcs box h 200 - Scatola da 50 pz h 200 - 50 pcs box

art.

211 Illius

ITEM

HEIGHT (mm)

FINISHING

BOX

TL049.002.026

100

Aluminium

100

TL049.002.025

100

Chrome

100

TL049.002.028

120

Aluminium

TL049.002.027

120

Chrome

TL049.002.030

140

Aluminium

TL049.002.029

140

Chrome

TL049.002.032

200

Aluminium

TL049.002.031

200

Chrome

140 140

120

100

140

120

100 100

Zamak 9 100 mm, adjustable Aluminium Grey, Chrome, Dark Brown, Black Matt, other on demand9 ging: 24 pcs box

200

10 32

al: : es:

200

Materiale: Materiale: Materiale: Zama Zama Zama Material: Material: Material: Zamak Zamak Zamak 95 Altezza: Altezza: Altezza: mm, 100 mm, regolabile mm, regolabile regolabile Height: Height: Height:100100 mm, 100 mm, adjustable mm, adjustable adjustable 10 100 32100 22 Finiture: Finiture: Finiture:Grigio Grigio Grigio Alluminio, Alluminio, Alluminio, Cromo, Cromo, Cromo, Marrone Marrone Marrone Scuro, Scuro, Scuro, Finishes: Finishes: Finishes: Aluminium Aluminium Aluminium Grey, Grey, Chrome, Grey, Chrome, Chrome, Dark Dark Brown, Dark Brown, Brown, 95 10 32 altre Nero, Nero, Nero, altre a altre richiesta a richiesta a richiesta Black Black Matt, Black Matt, other Matt, other on other demand on demand on demand 2295 Confezione: Confezione: Confezione: Scatola Scatola Scatola da 24 da pz 24 da pz 24 pz Packaging: Packaging: Packaging: 24 pcs 24 pcs 24 box pcs boxbox 10 32

Piedini | Feet Piedini | Feet

INCLINED LEGS

P ITEM

HEIGHT (mm)

FINISHING

BOX

TL049.002.046

100

Aluminium

TL049.002.045

100

Chrome

TL049.002.060

100

Black

TL049.002.047

100

Brown Metal Grey

89 89 89 32 32

FURNITAL

100

100 89

100

Piedini Piedini Piedini | Feet | Feet | Feet

107

Nero, altre a richiesta

art.

206

Black Matt, other on deman

Materiale: Zama Zamak Confezione: Scatola da 40 Material: pz Packaging: 40 pcs box Altezza: 100 mm, regolabile Height: 100 mm, adjustable Finiture: Alluminio, Cromo, Bronzo, Finishes: Aluminium Grey, Chrome, Bronze,Adjuster Foot Piedino Livellatore | Level Materiale: Grigio Zama Material: Zamak DECORATIVE HARDWARES | SOFA Black AND CABINET LEGS demand Nero, richiesta Matt, Altezza: 200altre mm,a regolabile Height: 200other mm,onadjustable Confezione: Scatola 40 pz Packaging: 40 pcs box Finiture: Grigioda Alluminio, Cromo, Bronzo, Finishes: Aluminium Grey, Chrome, Bronze, Material: Nero, Zamak altre a richiesta Black Matt, other on demand Height: 200 mm, adjustable Confezione: Scatola da 20 pz Packaging: 20 pcs box Finishes: Aluminium Grey, LEGS Chrome, Bronze, ROUNDED INCLINED Black Matt, other on demand Packaging: 20 pcs box FINISHING

BOX

TL049.002.062

100

Aluminium

TL049.002.063

100

Chrome

TL049.002.064

100

Black

TL049.002.065

100

Bronze

TL049.002.066

200

Aluminium

TL049.002.067

200

Chrome

TL049.002.068

200

Black

TL049.002.069

200

Bronze

100

Zama Grigio Alluminio, Cromo, Marrone Scuro, Nero, altre a richiesta Confezione: Scatola da 75 pz

Materiale: Finiture:

Piedini | Feet

200

100

HEIGHT (mm)

ITEM

Piedini | Feet

LEVELER H. 16MM

ITEM

HEIGHT (mm)

FINISHING

BOX

TL049.002.006

Aluminium

TL049.002.005

Chrome

TL049.002.061

Black

TL049.002.048

Bronze

TL049.002.043

Brown Metal Grey

Ø 12

Piedini | Feet

108

FURNITAL

Mater Finish

Packa

Chiave a brugola da 4 mm HARDWARES | SOFA AND CABINET LEGS 4 mmDECORATIVE allen key slot

LEVELER H. 60MM

Adjustment feet h 20 (swinging stem)

ITEM

HEIGHT (mm)

FINISHING

BOX

TL049.002.033

Aluminium

TL049.002.034

Chrome

TL049.002.044

Brown Metal Grey

Materiale: Zama Finiture: Grigio Alluminio, Cromo, altre a richiesta Confezione: Scatola da 20 pz

32 80 32 8

Material: Zamak Finishes: Aluminium Grey, Chrome, other on demand Packaging: 20 pcs box

Piedino di regolazione h 20 (gambo oscillante)

art.

209

Chiave a brugola da 4 mm 4 mm allen key slot Piedino di regolazione h 20 (gambo oscillante) Adjustment feet h 20 (swinging stem)

Material: Zamak Finishes: Aluminium Grey, Chrome, other on demand Packaging: 20 pcs box

80 R3

Materiale: Zama Finiture: Grigio Alluminio, Cromo, altre a richiesta Confezione: Scatola da 20 pz

Piedini | Feet

FURNITAL

109

_02.2

SHELF BRACKETS

_02.1 Sofa and cabinet legs _02.2 Shelf brackets

110

FURNITAL

111

597 597Libra Libra

art.art. DECORATIVE HARDWARES | SHELF BRACKETS

Thickness up to 30 mm Materiale: Finiture:

Zama Grigio Alluminio, Cromo, Bronzo, SHELF SUPPORT L. 97MM Nero, altre a richiesta Confezione: Imballo a coppie - Scatola da 48 pz

Material:

Zamak

Finishes: Aluminium AND Grey, Chrome, Bronze,SHELVES FOR WOODEN GLASS Black Matt, other on demand Packaging: Packaging in couple - 48 pcs box ITEM

FINISHING

Aluminium SB034.001.091 Nuova reggimensola per legno e/o vetro. Design moderno con grande funzionalità di applicazione. Black SB034.001.095

LENGTH (mm)

BOX

metallo esalta l’eleganza del prodotto.

597 Libra

Spessori Spessori da 6 da a 30 6 amm 30 mm

;OPJRULZZ MYVT [V TT ;OPJRULZZ MYVT [V TT

Materiale: Materiale: Zama Zama 20 Finiture: Finiture: Grigio Grigio Alluminio, Alluminio, Cromo, Cromo, Nichel, Nichel, altre altre a richiesta a richiesta Reggimensole | Shelf-supports

4H[LYPHS! 4H[LYPHS!Zamak Zamak Reggimensole Reggimensole | Shelf-supports | Shelf-supports -PUPZOLZ! -PUPZOLZ!Aluminium Aluminium Grey,Grey, Chrome, Chrome, Nickel, Nickel, otherother on demand on demand

Thickness from 6 to 30 mm

mo, Nichel Satinato,

atola da 10 pz

Material: Finishes:

Zamak Aluminium Grey, Chrome, Satin Nickel, other on demand Packaging: Packaging in couple - 10 pcs box

SHELF SUPPORT L. 180MM FOR WOODEN AND GLASS SHELVES

180

ITEM

FINISHING

LENGTH (mm)

BOX

SB034.001.097

Aluminium

180

SB034.001.096

Chrome

180

SB034.001.098

Black

180

SB034.001.099

Nickel

180

from 6 to 30mm

Reggimensole | Shelf-supports

Reggimensole Reggimensole | :OLSM Z\WWVY[Z | :OLSM Z\WWVY[Z

112

FURNITAL

52 mm

0 - 30 mm

52 mm

19 98

from 0 to 30mm

art.

97 19

New shelf-support for wooden or glass. Its design pure and trendy gives to this article a great functionality. In the case of glass shelves, the metal surface of the support enhances the elegance of the product.

580 580

Materiale: Material Finiture: Finiture:

art.art.

Confezione: Confezio Modello Modello depositato depositato | Patented | Patented

DECORATIVE HARDWARES | SHELF BRACKETS

Thickness Thickne fro

Material: Material Finishes: Finishes

SHELF SUPPORT L. 130MM FOR WOODEN AND GLASS SHELVES

Packaging: Packagi

ITEM FINISHING Zama Grigio Alluminio, Cromo, Bronzo, Nero, Aluminium SB034.001.016 Nichel Satinato, altre a richiesta Confezione: Imballo a coppie - ScatolaChrome da 10 pz SB034.001.015

Materiale: Finiture:

LENGTH (mm)

BOX

130

Thickness from 6 up to 30 mm Material: Finishes:

detnetaP | otatisoped olledoM

130

55 41

085 .tra

52 |

Zamak Aluminium Grey, Chrome, Bronze, Black Matt, Nickel Satin, other fromon 6 demand to 30mm Packaging: Packaging in couple - 10 pcs box

130

Reggimensole Reggimensole | Shelf-supports | Shelf-supports

130

Reggimensole | Shelf-supports

Materiale: Materiale: ZamaZama Finiture: Finiture:GrigioGrigio Alluminio, Alluminio, Cromo, Cromo, altre aaltre richiesta a richiesta Confezione: Confezione: Imballo Imballo a coppie a coppie - Scatola - Scatola da 10da pz10 pz For thickness For thickness from from 20 up20 toup 40to mm 40 mm Material: Material:Zamak Zamak Finishes: Finishes:Aluminium Aluminium Grey, Grey, Chrome, Chrome, other other on demand on demand Packaging: Packaging: Packaging Packaging in couple in couple - 10 pcs - 10box pcs box

SHELF SUPPORT L. 130MM FOR WOODEN SHELVES

ITEM

FINISHING amaZ :elairetaM atseihcir a ertlaSB034.001.014 ,omorC ,oinimullA oigiAluminium rG :erutiniF zp 01 ad alotacS - eippoc a ollabmI :enoizefnoC Chrome SB034.001.013 mm 04 ot pu 02 morf ssenkciht roF

LENGTH (mm)

BOX

130

kamaZ :lairetaM dnamed no rehto ,emorhC ,yerG muinimulA :sehsiniF xob scp 01 - elpuoc ni gnigakcaP :gnigakcaP

130

Reggimensole Reggimensole | Shelf-supports | Shelf-supports

55 14

130

from 20 to 40mm

031

stroppus-flehS | elosnemiggeR

FURNITAL

113

Reggimensola Reggimensola per per legno legno

26 | 26 |

513 513

art.art.

Materiale: Materiale: Zama Zama Finiture: Finiture: Grigio Grigio Alluminio, Alluminio, Cromo, Cromo, Bronzo, Bronzo,HARDWARES | SHELF BRACKETS DECORATIVE Nero, Nero, altre altre a richiesta a richiesta Modello Modello depositato depositato | Patented | Patented Confezione: Confezione:Imballo Imballo singolo singolo - Scatola - Scatola dada 2424 pzpz For For wooden wooden shelves shelves

SHELF SUPPORT L. 240MM FOR WOODEN SHELVES Material: Material: Zamak Zamak Finishes: Finishes: Aluminium Aluminium Grey, Grey, Chrome, Chrome, Bronze, Bronze, Black Black Matt, Matt, other other onon demand demand Packaging: Packaging:Single Single packaging packaging - 24 - 24 pcs pcs box box

ITEM

FINISHING

LENGTH (mm)

BOX

SB034.001.018

Aluminium

240

SB034.001.017

Chrome

240

SB034.001.093

Black

240

30 30

100

240 240

Possibilità Possibilità di regolare di regolare l’inclinazione l’inclinazione delladella mensola mensola Possibility Possibility to adjust to adjust shelfshelf inclination inclination

Reggimensole Reggimensole | Shelf-supports | Shelf-supports

Materiale: Materiale: Zam Finiture: Finiture:Gri altr Confezione: Confezione Imb

Thickness Thickness up to

SHELF SUPPORT L. 180MM FOR WOODEN AND GLASS SHELVES

ITEM

FINISHING

LENGTH (mm)

BOX

SB034.002.010

Aluminium

180

SB034.002.009

Chrome

180

Reggimensole Reggimensole | Shelf-supports | Shelf-supports

114

FURNITAL

from 0 to 40mm

Material: Material:Zam Finishes: Finishes:Alu oth Packaging: Packaging: Pac

Finiture: Finiture:GrigioGrigio Alluminio, Alluminio, Cromo, Cromo, Bianco, Bianco, altre aaltre richiesta a richiesta Confezione: Confezione: Imballo Imballo a coppie a coppie - Scatola - Scatola da 70da pz70 pz Thickness Thickness up toup 30to mm 30 mm

DECORATIVE HARDWARES | SHELF BRACKETS

Material: Material:Zamak Zamak Finishes: Finishes:Aluminium Aluminium Grey, Grey, Chrome, Chrome, White,White, 23 | 23 other other on L. demand on demandFOR WOODEN AND| GLASS SHELF SUPPORT 100MM SHELVES Packaging: Packaging: Packaging Packaging in couple in couple - 70 pcs - 70box pcs box

520 520Pinocchietto Pinocchietto

art.art.

LENGTH (mm) | Patented BOX Modello Modello depositato depositato | Patented

ITEM

FINISHING

SB034.002.002

Aluminium

100

SB034.002.001

Chrome

100

from 4 to 30mm

Ma Fin

Co Reggimensole Reggimensole | Shelf-supports | Shelf-supports

SHELF SUPPORT L. 130MM FOR WOODEN AND GLASS SHELVES

Ma Fin

Pa ITEM

FINISHING

LENGTH (mm)

BOX

SB034.002.006

Aluminium

130

SB034.002.005

Chrome

130

from 4 to 28mm

Tickness Tickness up toup 16to mm 16 mm Material: Material:Zamak Zamak Finishes: Finishes:Aluminium Aluminium Grey, Grey, Chrome, Chrome, other other on demand on demand Packaging: Packaging: Packaging Packaging in couple in couple - 120-pcs 120box pcs box

Reggimensole Reggimensole | Shelf-supports | Shelf-supports

SHELF SUPPORT L. 60MM FOR WOODEN AND GLASS SHELVES

ITEM

FINISHING

LENGTH (mm)

BOX

SB034.002.008

Aluminium

120

SB034.002.007

Chrome

120

FURNITAL

from 4 to 16mm

Reggimensole Reggimensole | Shelf-supports | Shelf-supports

115

DECORATIVE HARDWARES | SHELF BRACKETS

art.

REVERSIBLE SHELF SUPPORT FOR WOODEN SHELVES

595 Giano

Materiale: ITEM - Art. 595A - Alluminio - Art. 595B - Alluminio SB034.001.100 - Art. 595C - Zama Finiture:

Art. 595A

Materiale: - Art. 595A - Alluminio - Art. 595B - Alluminio - Art. 595C - Zama

4H[LYPHS! 595B - (Y[ ( - Aluminium - Art. 595B - Aluminium595C - Art. 595C - Zamak

Finiture:

-PUPZOLZ!

Grigio Alluminio, Nero, Nichel Verniciato, altre a richiesta

FINISHING

LENGTH (mm)

Aluminium

330

-PUPZOLZ! 235

SB034.001.102

Nickel

330

235

SB034.001.103

Aluminium

190

175

SB034.001.104

Black

190

175

SB034.001.105

Nickel

190

175

132

120

132

120

132

120

altre a richiesta

Aluminium SB034.001.106 L. H. S. SB034.001.107 330 235 Black 20

190 175 16 Nickel SB034.001.108 132 120 12

595C

L = LENGTH H = HEIGHT S = THICKNESS

330

235

190

175

132

120

Aluminium 12 Grey, Black, Painted Nic other on demand

Aluminium Grey, Black, Painted Nickel, other on demand

595A 595B

- Art. 595B - Aluminium -235 Art. 595C20- Zamak 12

Grigio Alluminio, Nero, Nichel Verniciato, Black 330 SB034.001.101

Art.

4H[LYPHS!

HEIGHT THICK. BOX - (Y[ ( - Aluminium (mm) (mm)

Reggimensole | :OLSM Z\WWVY[Z

116

FURNITAL

DECORATIVE HARDWARES | SHELF BRACKETS

542 542

SHELF SUPPORT L. 30MM FOR GLASS SHELVES

FINISHING

LENGTH (mm)

BOX

SB034.001.001

Aluminium

SB034.001.002

Chrome

ITEM

art.art.

36 | 36 |

Per spessori Per spessori da 6/8/10 da 6/8/10 mm mm

10.50

25.40

30 30 Materiale: Materiale: ZamaZama Finiture: Finiture: Grigio Grigio Alluminio, Alluminio, Cromo, Cromo, altre altre a richiesta a richiesta Confezione: Confezione: Imballo Imballo a coppie a coppie from 4 to 10mm Scatola Scatola da 150 da pz 150 pz 20

2020

For thicknes For thicknes fromfrom 6/8/10 6/8/10 mm mm Material: Material:Zamak Zamak Finishes: Finishes:Aluminium Aluminium Grey,Grey, Chrome, Chrome, Thickness Thickness up toup 10tomm 10 mm otherother on demand on demand Materiale: Materiale: ZamaZama Material: Material:Zamak Zamak Packaging: Packaging: Packaging Packaging in couple in couple Finiture: Finiture: Grigio Grigio Alluminio, Alluminio, Cromo, Cromo, altre altre a richiesta a richiesta Finishes: Finishes:Aluminium Aluminium Grey,Grey, Chrome, Chrome, otherother on demand on demand 150 pcs 150 box pcs box Confezione: Confezione: Imballo Imballo singolo singolo - Scatola Scatola da 50 dapz50 pz Packaging: Packaging: Single Single packaging packaging - 50 pcs - 50 box pcs box SHELF SUPPORT L.-25MM FOR GLASS SHELVES

533 533

art.art.

Modello Modello depositato depositato | Patented | Patented

ITEM

FINISHING

THICKNESS (mm)

DIAMETER (mm)

BOX

SB034.002.017

Aluminium

Up to 6.5

150

SB034.002.016

Chrome

Up to 6.5

150

SB034.002.019

Aluminium

Up to 8.5

150

SB034.002.018

Chrome

Up to 8.5

150

SB034.002.021

Aluminium

Up to 10.5

150

SB034.002.020

Chrome

Up to 10.5

150

art.art. 518/6 518/6

Art. Art.518/6 Art. 518/6 Art.518/6 518/6 25 25 25

21 21 21

diameter 21 21 21

25 25 25

art.art. 51

sp sp sp6 66mm mm mm sp sp sp6 66mm mm mm thickness 50

50 30

da 4 a 30 damm 4 a 30 mm

Thickness Thickness up toup 30tomm 30 mm 117 FURNITAL Materiale: Materiale: ZamaZama Material: Material:Zamak Zamak Finiture: Finiture: Grigio Grigio Alluminio, Alluminio, Cromo, Cromo, altre altre a richiesta a richiesta Finishes: Finishes:Aluminium Aluminium Grey,Grey, Chrome,other Chrome,other on demand on demand

Art. Art.

25 25 2

118

FURNITAL

_03 CABINET MECHANISMS

119

_03.1

THIN FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

_03.1 Thin flap opening mechanism with soft opening and closing _03.2 Flap opening mechanism with soft opening and closing _03.3 Flap opening mechanism with soft opening _03.4 Flap opening mechanism for short, deep cabinet _03.5 Hinges

120

FURNITAL

121

CABINET MECHANISMS | THIN FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

Unico THIN FLAP OPENING MECHANISM WITH SOFT OPENING AND SOFT CLOSING by ambigence

Meccanismo di apertura con cerniera integrata Opening mechanism with integrated hinge

Finiture meccanismo Mechanism's finishing

Colori standard cover Cover’s standard colors

Nichelata Nickel plated

Bianco White

Nichelata nera Black nickel plated

Grigio chiaro TECHNICAL Light grey SPECIFICATIONS: DOOR’S THICKNESS FROM 18 TO 20MM DOOR’S THICKNESS FROM 22 TO 30MM

Nero NARROW MECHANISM’S THICKNESS Black DOOR’S POSITION 3D ADJUSTMENT SOFT OPENING AND SOFT CLOSING SPRING’S FORCE ADJUSTMENT Smoke Smoke

Imballaggio Packaging Montaggio esterno con cover External mounting Contiene 1 setwith di cover meccanismi (destro + sinistro) Contiene 20 cover (per meccanismi e attacchi anta) SET OFof MECHANISMS 18 - 20MM Contains 1 set mechanisms (rightFOR + left)DOOR THICKNESSContain 20 covers (for mechanisms and door connections) Catalogo e manuale tecnico Catalogue and technical manual

122

ITEM

FORCE

FINISHING

DOOR THICK. (mm)

BOX

MK622.001.001

Type 1

Nickel Silver

18 - 20

MK622.001.002

Type 2

Nickel Silver

18 - 20

MK622.001.003

Type 3

Nickel Silver

18 - 20

MK622.001.004

Type 4

Nickel Silver

18 - 20

MK622.001.005

Type 5

Nickel Silver

18 - 20

MK622.001.006

Type 6

Nickel Silver

18 - 20

ITEM

FORCE

FINISHING

DOOR THICK. (mm)

BOX

MK622.001.007

Type 1

Nickel Black

18 - 20

MK622.001.008

Type 2

Nickel Black

18 - 20

MK622.001.009

Type 3

Nickel Black

18 - 20

MK622.001.010

Type 4

Nickel Black

18 - 20

MK622.001.011

Type 5

Nickel Black

18 - 20

MK622.001.012

Type 6

Nickel Black

18 - 20

FURNITAL

Imballaggio Packaging

CABINET MECHANISMS | THIN FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

Contiene 1 set di meccanismi (destro + sinistro) Contiene 20 cover (per meccanismi e attacchi anta) SET OF 22 - 30MM Contains 1 set of MECHANISMS mechanisms (rightFOR + left)DOOR THICKNESSContain 20 covers (for mechanisms and door connections)

Colori standard cover Cover’s standard colors

Bianco White Grigio chiaro Light grey Nero Black Smoke Smoke

ITEM

FORCE

FINISHING

DOOR THICK. (mm)

BOX

MK622.001.013

Type 1

Nickel Silver

22 - 30

MK622.001.014

Type 2

Nickel Silver

22 - 30

MK622.001.015

Type 3

Nickel Silver

22 - 30

MK622.001.016

Type 4

Nickel Silver

22 - 30

MK622.001.017

Type 5

Nickel Silver

22 - 30

MK622.001.018

Type 6

Nickel Silver

22 - 30

ITEM

FORCE

FINISHING

DOOR THICK. (mm)

BOX

MK622.001.019

Type 1

Nickel Black

22 - 30

MK622.001.020

Type 2

Nickel Black

22 - 30

MK622.001.021

Type 3

Nickel Black

22 - 30

MK622.001.022

Type 4

Nickel Black

22 - 30

MK622.001.023

Type 5

Nickel Black

22 - 30

MK622.001.024

Type 6

Nickel Black

22 - 30

SET OF COVER CARTERS

Contiene 20 cover (per meccanismi e attacchi anta) Contain 20 covers (for mechanisms and door connections)

FURNITAL

ITEM

FINISHING

BOX

MK622.010.001

White

MK622.010.002

Black

MK622.010.003

Grey

MK622.010.004

Smoke

Effegibrevetti | Unico

123

CABINET MECHANISMS | THIN FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

8&9"%%"27".(2&)/& :$$;2<"(#=/2/&9%".

DOOR WEIGHT TABLES

3DF2>25@F

@4F2>2C4B

C4D2>2A4@

B4F2>2D4?

5@F2>25BF

54?2>2@4B

@4D2>2?4?

?4?2>2B4?

B4A2>23F4F

5BF2>2@@F

54F2>2@4C

@4C2>2C4?

?452>2A4C

A4?2>2E4C

E4?2>23F4?

@@F2>2@DF

54F2>254D

54E2>2C45

C4@2>2?4?

?4A2>2B4A

B4B2>23F4F

3F43>2354?

54?2>2@4A

@4B2>2C4B

B4F2>2D4@

D4C2>2334?

@DF2>2C@F

C4D2>2A4E

FORCE TYPE 1

FORCE TYPE 2

FORCE TYPE 3

FORCE TYPE 4

FORCE TYPE 5

FORCE TYPE 6

DOOR HEIGHT

SET 2PCS

180 - 230

3.0 - 4.7

4.8 - 6.3

7 - 8.5

230 - 270

2.5 - 3.7

3.8 - 5.5

5.5 - 7.5

7.6 - 10

2 - 3.4

3.4 - 4.5

5.2 - 6.4

6.5 - 9.4

9.5 - 10.5

330 - 380

2 - 2.8

2.9 - 4.2

4.3 - 5.5

5.6 - 7.6

7.7 - 10

10.1 - 12.5

380 - 430

2.5 - 3.6

3.7 - 4.7

4.8 - 6.9

7 - 8.3

8.4 - 11.5

430 - 480

2 - 2.9

3-4

4.1 - 6

6.1 - 7.9

8 - 10.5

C@F2>2CDF

270 - 330 !""#$%&'#(#))%*+* ,-%./

%&#$'()$**$ $/.*'-#,**,/0

54F2>254E

@4F2>2C4F

C432>2A4F

A432>B4E

_side panel’s drilling

112

A = 30 max

150 min

Ø5

170 min

124

FURNITAL

D4F2>23F4?

CABINET MECHANISMS | THIN FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

_door’s drilling !"#$%&#$'$(%$ )""#*+',#-..-(/ D=S+1 !"#$%&#$'$(%$ )""#*+',#-..-(/ W

128

110

118

R5 Y

R5 10

a. A

_door thickness 18 - 20mm

_door thickness 22 - 30mm

1.5

10.5

1.5

15.5

2.5

9.5

2.5

14.5

A-A

5 3E;

36E;

5 3J

5 3E;

3;E;

338

3J 8

3E;

36E; 8E;

9E;

3E;

3;E;8E;

3GE;

36 F

3; F

8E;

9E; G

8E;

3GE;G

9 ;

3G;

;

FURNITAL

!""#$%&'#(#))%*+* ,-%./

125

_03.2

FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

126

FURNITAL

127

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

FLAP OPENING MECHANISM WITH SOFT OPENING AND SOFT CLOSING

TECHNICAL SPECIFICATIONS: HORIZONTAL & VERTICAL MOUNTING SYMMETRIC LEFT AND RIGHT OPENING & CLOSING DAMPING FUNCTION DOOR’S OPENING ANGLE ADJUSTMENT MAXIMUM DOOR’S WEIGHT 14KG DOOR’S HEIGHT FROM 20 TO 48CM

MiniWinch MECHANISM

Meccanismo di apertura per ante a ribalta cieche e a telaio. MiniWinch è simmetrico, lo stesso meccanismo può essere applicato sia sul lato sinistro sia sul lato destro del mobile e può essere montato sia in posizione orizzontale che in verticale adattandosi ad una più ampia varietà di mobili. Ammortizzato in apertura e chiusura. Lunghezza del cavo e forza della molla regolabili. Un meccanismo brevettato annulla il peso dell’anta in fase di chiusura, garantendo all’utente il minimo sforzo. I colori delle cover si abbinano a quelli di Ankor GT e In-Side. Materiali: Acciaio, Zama, Tecnopolimero. Colori Cover: Nero, Bianco, Grigio Chiaro, Marrone Scuro, Argento Lucido Verniciato, Argento Opaco Verniciato, Nichelato Opaco Verniciato.

Effegibrevetti | MiniWinch

Opening mechanism for both solid and framed flap doors. MiniWinch is symmetrical, the same mechanism can be applied both on left and right side of the furniture and can be mounted either horizontally and vertically adapting to a wider variety of furniture. Amortized opening and closing. Adjustable cable length and spring strenght. A patented mechanism clears the door’s weight, providing ITEM the minimum user strain during the closing phase. Cover’s colours match those of Ankor GT and In-Side. Materials: Steel, Zama, Technopolymer. Cover Colours: Black, MK118.001.002 White, Light Grey, Dark Brown, Painted Polished Silver, Painted Matte Silver, Painted Matte Nickel.

FORCE

BOX

Spring 6

MK118.001.003

Spring 10

MK118.001.004

Spring 14

MK118.001.005

Spring 16

One piece of mechanism in single carton box with screws and attach for doors. Ten pieces in one masterbox.

COVER

128

ITEM

FINISHING

BOX

MK118.002.001

White

MK118.002.002

Black

MK118.002.003

Grey

MK118.002.004

Brown

MK118.002.005

Matt Chrome

MK118.002.007

Matt Nickel

MK118.002.006

Matt Silver

MK118.002.010

Anthracite

MK118.002.011

Smoke

FURNITAL

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

DOOR WEIGHT TABLES MK118.001.002

Mechanism mounted horizontally, with traditional hinges

2PCS

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

200 - 230

3.5 - 4.8

4.3 - 5.8

4.9 - 6.9

5.9 - 7.8

230 - 270

3.2 - 4

6.8 - 8.5

3.7 - 5.6

6.8 - 9.2

4.4 - 6.2

6 - 7.6

270 - 330

3.1 - 3.9

5.4 - 7.4

3.8 - 5

7.4 - 9

4 - 5.2

8.6 - 11

4.7 - 7.3

10.6 - 12.6

330 - 380

2.6 - 3.6

5 - 7.2

3.3 - 4.9

7.2 - 8.8

3.7 - 5.1

8 - 11.2

4.4 - 5.5

9.6 - 12.4

380 - 430

2.8 - 3.7

4.5 - 7

2.9 - 3.9

6.1 - 8.7

3.3 - 4.5

7.5 - 11

3.9 - 5.2

8.4 - 12.2

430 - 460

2.2 - 3

4.3 - 6.3

2.9 - 3.7

5.9 - 8.3

3.3 - 4.5

7.5 - 10.5

3.7 - 4.9

8.5 - 11

460 - 480

2.8 - 3

4.1 - 6.1

2.9 - 3.7

5.5 - 7.5

3.4 - 4.1

7 - 9.5

3.7 - 4.5

9 - 10

DOOR HEIGHT

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

200 - 230

4 - 4.8

4.2 - 6.2

4.8 - 6.8

5.8 - 8

230 - 270

3 - 4.4

6 - 8.4

3.6 - 5.2

6.8 - 9.6

4.4 - 6

5.2 - 7

270 - 330

2.9 - 3.8

5.6 - 7.8

3 - 4.6

6.4 - 8.8

3.6 - 5.2

7 - 10.2

4.6 - 6

8.6 - 11.8

330 - 380

2.7 - 3.7

5-7

3.2 - 4.3

6.5 - 8.5

3.7 - 4.9

6.9 - 10.1

4.3 - 5.7

8.7 - 11.1

380 - 430

2.9 - 3.6

4.5 - 6.1

3.1 - 3.9

5.7 - 7.3

3.7 - 4.5

6.9 - 8

4.5 - 6.1

8.5 - 10.1

430 - 460

2.7 - 3.1

4.3 - 6.1

2.7 - 3.9

5.9 - 8.3

3.7 - 4.7

7.1 - 9.5

4.1 - 4.9

8.3 - 9.5

460 - 480

2.5 - 2.9

4.1 - 5.7

2.8 - 3.8

5.3 - 7.7

3.6 - 4.4

6.8 - 8.9

3.8 - 4.8

7.2 - 9.6

FURNITAL

MK118.001.003

MK118.001.004

MK118.001.005

MK118.001.004

MK118.001.005

DOOR HEIGHT

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

200 - 230

4.4 - 5.5

6.3 - 8.5

7.5 - 9.3

230 - 270

3.4 - 4.5

6.8 - 9.2

4.5 - 5.6

9.2 - 12

6.8 - 8.6

270 - 330

3 - 4.9

6.1 - 7.7

3.7 - 5.1

7.7 - 10.1

5.4 - 7.1

10.5 - 13.7

6.1 - 7.3

12.1 - 14.5

330 - 380

2.5 - 3.6

5.1 - 6.9

3.2 - 4.3

6.6 - 9.3

4.6 - 6.1

9.1 - 11.3

4.9 - 6.4

10.5 - 12.9

380 - 430

2.3 - 3.2

4.4 - 6.6

3-4

6.6 - 8.2

4.4 - 5.4

8.4 - 10.2

4.6 - 5.6

9.4 - 11.4

430 - 460

2.3 - 3

4.2 - 6.2

2.8 - 3.6

5.4 - 7.6

4.2 - 5.2

7.4 - 9.4

4.4 - 5.4

8.4 - 10.6

460 - 480

2.3 - 3

4.2 - 6.2

2.8 - 3.6

5.4 - 7.6

4 - 5.2

7.4 - 9.4

4.4 - 5.4

8.4 - 10.6

MK118.001.002

Mechanism mounted vertically, with flat hinges

MK118.001.005

1PCS

MK118.001.002

Mechanism mounted vertically, with traditional hinges

MK118.001.004

DOOR HEIGHT

MK118.001.002

Mechanism mounted horizontally, with flat hinges

MK118.001.003

MK118.001.004

MK118.001.005

DOOR HEIGHT

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

200 - 230

4.1 - 5.9

5.3 - 7.3

8 - 11

230 - 270

3.3 - 4.8

6.8 - 9.6

4.2 - 6

9.6 - 12.8

6.6 - 8.6

270 - 330

3.2 - 4.5

6.3 - 8.1

3.8 - 5.1

7.9 - 11.1

5.7 - 7.3

11.3 - 14.5

6.1 - 8

12.9 - 15.5

330 - 380

2.6 - 3.4

5 - 6.5

3.3 - 4.5

7.3 - 8.5

4.9 - 6.3

9.7 - 11.7

5.3 - 6.5

10.7 - 12.9

380 - 430

2.5 - 3.4

5 - 6.2

3.2 - 4.2

6.2 - 8.2

4.4 - 5.4

8.6 - 10.6

4.8 - 5.6

9.8 - 11.4

430 - 460

2.3 - 3

4.6 - 6.2

3 - 3.8

6.2 - 7.8

4 - 5.2

7.8 - 10.2

4.6 - 5.4

9 - 10.4

460 - 480

2.4 - 3.2

4.6 - 6

2.8 - 4

5.6 - 7.8

3.8 - 5

7.6 - 10

4.5 - 5.4

8.8 - 10.4

129

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

_side panel’s drilling

185

38 38

HD = DOOR HEIGHT

Ø5 x12

HD = DOOR HEIGHT

Ø5 x12

196

110

HD (mm)

Y (mm)

Z (mm)

X (mm)

HD (mm)

Z (mm)

200 - 330

102

137 + B

194

200 - 330

161 + B

330 - 430

126

161 + B

218

430 - 480

136

171 + B

228

Foratura anta alluminio Aluminium door drilling _metal plate for door

_door drilling for external fixing

A-8

Ø5x13 Ø10x11

5°

14 14

Ø8

Z-8

_door overlay

10 + A

130

90°

Ø8

FURNITAL

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING AND CLOSING

_features

Montaggio Montaggio orizzontale Montaggio orizzontale eorizzontale verticale e verticale e verticale Horizontal & vertical mounting Montaggio Montaggio orizzontale orizzontale eorizzontale verticale e verticale e verticale Horizontal Horizontal &Montaggio Horizontal vertical & vertical mounting & vertical mounting mounting Horizontal Horizontal &Horizontal vertical & vertical mounting & vertical mounting mounting

Simmetrico Simmetrico Simmetrico Symmetric Simmetrico Simmetrico Simmetrico Symmetric Symmetric Symmetric Symmetric Symmetric Symmetric

Apertura Apertura e closing chiusura Apertura e chiusura ammortizzate e chiusura ammortizzate ammortizzate Opening & damping function Apertura Apertura chiusura Apertura chiusura ammortizzate eclosing chiusura ammortizzate ammortizzate Opening Opening &eclosing Opening &eclosing damping & damping function damping function function Opening Opening & closing Opening & closing damping & closing damping function damping functionfunction

HD Hp

Ante da Ante 20da fino Ante 20a fino 48 da 20 cm a 48 fino cm a 48 cm massimo massimo Peso anta massimo 14 anta kg 14anta kg 14 kg Regolazione Regolazione angolo Regolazione angolo d’apertura angolo d’apertura d’apertura Peso Peso Ante da Ante 20 da fino Ante 20 a fino 48 da 20 cm a48 48 fino cm a 48 Peso Peso massimo massimo Peso anta massimo 14 anta kgkg 14 anta kgkg1414 kgkgDoor’s Regolazione Regolazione angolo Regolazione angolo d’apertura angolo d’apertura Door’s opening angle d’apertura adjustment Maximum door’s weight 14Kg Door’s height from 20 toto 48cm Door’s height Door’s height from 20 from height 20 from to cm 48 20 cm tocm 48 cm Maximum door’s Maximum door’s weight weight door’s 14 weight 14 Door’s Door’s opening Door’s opening angle opening angle adjustment adjustment angle adjustmentMaximum Door’s heightDoor’s height from 20 from height to20 48 from to cm 48 20cm to 48 cm Maximum door’s Maximum door’s weight weight door’s 14 kgweight 14 kg 14 kgDoor’s Door’s Door’s opening Door’s opening angle opening angle adjustment adjustment angle adjustmentMaximum

_packaging cover content

PACKAGING CONTENT: 10 covers

FURNITAL

131

_03.3

FLAP OPENING MECHANISM WITH SOFT OPENING

132

FURNITAL

133

inch

rtura per Ante a Ribalta m for Flap Doors

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING

FLAP OPENING MECHANISM WITH SOFT OPENING

TECHNICAL SPECIFICATIONS: HORIZONTAL & VERTICAL MOUNTING SYMMETRIC LEFT AND RIGHT OPENING DAMPING FUNCTION DOOR’S OPENING ANGLE ADJUSTMENT MAXIMUM DOOR’S WEIGHT 9KG DOOR’S HEIGHT FROM 20 TO 48CM

MECHANISM

134

Catalogo e manuale tecnico Catalogue and technical manual

ITEM

FORCE

FINISHING

BOX

MK132.001.001

Spring 4

White

MK132.001.002

Spring 4

Black

MK132.001.003

Spring 4

Brown

MK132.001.004

Spring 4

Grey

ITEM

FORCE

FINISHING

BOX

MK132.001.005

Spring 6

White

MK132.001.006

Spring 6

Black

MK132.001.007

Spring 6

Brown

MK132.001.008

Spring 6

Grey

ITEM

FORCE

FINISHING

BOX

MK132.001.009

Spring 10

White

MK132.001.010

Spring 10

Black

MK132.001.011

Spring 10

Brown

MK132.001.012

Spring 10

Grey

FURNITAL

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING

ITEM

FORCE

FINISHING

BOX

MK132.001.013

Spring 14

White

MK132.001.014

Spring 14

Black

MK132.001.015

Spring 14

Brown

MK132.001.016

Spring 14

Grey

!"#$%%$&'$()&"*+" ,--.&/$)01+&+"#%$(

DOOR WEIGHT TABLES SPRING 4

SPRING 10

SPRING 14

DOOR HEIGHT

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

1PCS

2PCS

210 - 270

1.7 - 3

3.9 - 4.5

3.1 - 4

7.5 - 8

4.6 - 5.3

8 - 8.5

5.1 - 6

270 - 330

1.7 - 3

3.3 - 4.5

3.1 - 4

6.1 - 7.4

4 - 5.1

7.5 - 8.2

4.4 - 6

7.5 - 8.5

330 - 380

1.7 - 1.9

3.2 - 3.5

2.9 - 3.5

5.1 - 6.8

3.6 - 4.3

6.8 - 7.5

4.4 - 5

7.5 - 8

380 - 430

1.5 - 1.8

2.7 - 3.3

2.5 - 3.3

4.8 - 6.6

3.3 - 3.8

6.8 - 7.2

3.6 - 4.7

7.3 - 8

1.2 - 1.7

2.5 - 3.1 3-%%" 4'.)*0 -

2.5 - 3.3

4.6 - 6

6.1 - 7

3.5 - 4.5

7.1 - 8 3-%%" 4'.)*0 6.6 - 7.5

430 - 460 3-%%" 4 4'.)*0460 - 480 4 3;<=>?;@<2 A&5

SPRING 6

3;<=>?;@<2 A&7

3;<=>?;@<2 A&5

6 2.26- 2.8

4.4 - 5.3

3;<=>?;@<2 A&7

3.2 - 3.5 3-%%" 4'.)*0 2.8 - 3.2

3;<=>?;@<2 A&5

5B9&8&:

3,9 - 4,5

796&8&::6

5B9&8&:

3,3 - 4,5

330 - 380

5B9&8&5BD :B7&8&:BC 1PCS 7BD&8&:BC DOOR HEIGHT 2PCS

1PCS

2PCS

3,6 - 1PCS 4,3

2PCS

380 - 430

1,5 - 1,8 210 - 270 7B9&8&:B:

7BC&8&:B: 4.3 - 5.6

4,8 - 6,6 3.9 - 4.9

3,3 - 3,8 5.7 - 6.5

430 - 460

5B7&8&5B9

7B:&8&:B: 4.2 - 5

3.2 - 4.1

7 - 7.5

:B7&8&:BC 4.2 - 5.5

7.6 - 9

2,2 - 2,8

4,4 - 5,3

7BC&8&:B5

460 - 480

330 - 380

380 - 430 430 - 460 #$%%& 4 '"()*+460 - 480 4

7,5 - 8

4,6 - 5,3

3,1 - 4

6,1 - 7,4

4 - 5,1

SPRING 4

2.5 - 3.8 2.3 - 3.1

1.8 - 2.6

3.4 - 3.9

1.7 - 2.3 1.5 - 2 -

SPRING 6

5,1 - 6,8

4,6 - 6

7,5 - 8,2

SPRING 10

2,8 - 3,2

6,8 - 7,5 6,8 - 7,2 6,1 - 7

5,5 - 6,5

4,4 - 6

7,5 - 8,5

4,4 -2PCS 5

7,3 - 8

3,5 - 4,5 -

7,1 - 8

3,3 - 4,3

6,6 - 7,5

5.5 - 5.9

4.4 - 5.5

8.3 - 9

2.9 - 4.2

2.8 - 3.5

4.7 - 6.2

3.5 - 4.3

7.2 - 7.7

4.3 - 4.6

7.3 - 8.5

3.1 - 4 #$%%& '"()*+ 2.8 - 3.8

2.5 - 3.2

4.4 - 6.1

6.2 - 7.5

3.6 - 4.3

.,-/0/.1-

2,5 - 3,8

4,3 - 5,6

3,9 - 4,9

.1-/0/22-

.:2/0/2:,

4,2 - 5

3,2 - 4,1

330 - 380

1,8 - 2,6

3,4 - 3,9

3,0 - 3,8

5,6 - 6,5

380 - 430

,:1/0/.:2

2,9 - 4,2

2,8 - 3,5

430 - 460

,:;/0/.

3,1 - 4 2,8 - 3,8

4.1 - 5.8

#34567384! 9/.

3.3 - 4 #$%%& '"()*+ 3.2 - 3.6

#34567384! 9/,

5,7 - 6,5

1/0/1:; 4,2 - 5,5 E!!F@G;>@F&8&?E=@;@H

,6 - ,7.2

#34567384! 9/.

3.3 - 4

7,5 - 8

3,6 - 4,7 -

7.5 - 8.3

6 2.36- 2.6

3;<=>?;@<2 A&7

SPRING 14 1PCS

14 14

5,1 - 6

3.8 - 4.7

#34567384! 9/,

8 - 8,5

5.6 - 6.5

#34567384! 9/.

460 - 480

3;<=>?;@<2 A&5

3 - 3.8

#34567384! 9/,

3.3 - 4.3

3;<=>?;@<2 A&7

756&8&796

270 - 330

3,1 - 4

56 5.556 - 6.5

6.8 - 8.3 #$%%& '"()*+ 6.3 - 7.5

#34567384! 9/,

14 14 #34567384! 9/.

7,6 - 9

;:;/0/;:<

3,8 - 4,7

7,5 - 8,3

4,4 - 5,5

8,3 - 9

4,7 - 6,2

3,5 - 4,3

1:./0/1:1

4,3 - 4,6

7,3 - 8,5

.:;/0/2:.

4,4 - 6,1

3,3 - 4

6,2 - 7,5

3,6 - 4,3

6,8 - 8,3

2,3 - 2,6

4,1 - 5,8

3,2 - 3,6

6 - 7,2

3,3 - 4

6,3 - 7,5

! =>>?8@368?/0/7=5838A

FURNITAL

135

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING

110

210 min

Ø5 x 12

HD = DOOR HEIGHT

_side panel’s drilling

110

180 min

82 min

HD (mm)

Y (mm)

Z (mm)

X (mm)

HD (mm)

Z (mm)

210 - 270

135

123 + B

173 min

210 - 480

123 + B

270 - 480

148

144 + B

186 min

Foratura anta alluminio Aluminium door drilling _metal plate for door

_door drilling for external fixing

A-8

Ø5x13 Ø10x11

5°

14 14

Ø8

Z-8

_door overlay

13 + A

136

90°

Ø8

FURNITAL

CABINET MECHANISMS | FLAP OPENING MECHANISM WITH SOFT OPENING

_features

Montaggio Montaggio orizzontale orizzontale e verticale e verticale Regolazione angolo d’apertura Horizontal & vertical mounting Montaggio Montaggio orizzontale Montaggio orizzontale eorizzontale verticale e verticale e verticale Horizontal Horizontal & vertical & vertical mounting mounting Door’s opening angle adjustment Horizontal Horizontal &Horizontal vertical & vertical mounting & vertical mounting mounting

Simmetrico Simmetrico Simmetrico Symmetric Simmetrico Simmetrico Simmetrico Symmetric Symmetric Symmetric Symmetric Symmetric Symmetric

kg kg

Apertura eammortizzata chiusura e chiusura ammortizzate ammortizzate OpeningApertura damping function Apertura Apertura e chiusura Apertura chiusura ammortizzate eclosing chiusura ammortizzate ammortizzate Opening damping function Opening Opening &eclosing & damping damping function function Opening Opening & closing Opening & closing damping & closing damping function damping functionfunction

Hp HD Hp

Ante daAnte 20 fino da 20 a 48 fino cm a 48 cm Peso massimo anta kg 14 kg Regolazione Regolazione angolo angolo d’apertura d’apertura Ante 14 daanta 12 fino a 20 cm Peso massimo anta 7 kg Peso massimo Ante da Ante 20 da fino Ante 20 a fino 48 da 20 cm a from 48 fino cm a 48 Peso Peso massimo massimo Peso anta massimo 14 anta kg 149Kg anta kgkg 1414 kg Regolazione Regolazione angolo Regolazione angolo d’apertura angolo d’apertura d’apertura Door’s opening angledoor’s adjustment Maximum door’s weight Door’s from 20 to 48cm Door’s Door’s height from height 20 to 48 20 cm tocm 48 cm Maximum door’s weight door’s weight 14 Door’s Door’s opening opening angle adjustment angle adjustment Door’s height from 12kgto 20 cm height Maximum weight 7 kgMaximum Door’s heightDoor’s height from 20 from height to20 48 from to cm 48 20cm to 48 cm Maximum door’s Maximum door’s weight weight door’s 14 kgweight 14 kg 14 kgDoor’s Door’s Door’s opening Door’s opening angle opening angle adjustment adjustment angle adjustmentMaximum

_packaging mechanism content

PACKAGING CONTENT: 10 mechanisms per box with screws and attach for doors

FURNITAL

137

_03.4

FLAP OPENING MECHANISM FOR SHORT, DEEP CABINET

138

FURNITAL

139

CABINET MECHANISMS | FLAP OPENING MECHANISM FOR SHORT, DEEP CABINET

Winch

apertura per Ante a Ribalta FLAP OPENING anism for Flap Doors

MECHANISM WITH SOFT OPENING FOR SHORT, DEEP CABINET

TECHNICAL SPECIFICATIONS: SYMMETRIC LEFT AND RIGHT OPENING DAMPING FUNCTION DOOR’S OPENING ANGLE ADJUSTMENT MAXIMUM DOOR’S WEIGHT 7KG DOOR’S HEIGHT FROM 12 TO 20CM

MECHANISM

140

Catalogo e manuale tecnico Catalogue and technical manual

ITEM

FORCE

FINISHING

BOX

MK164.001.001

Spring 2

White

MK164.001.002

Spring 2

Black

MK164.001.003

Spring 2

Grey

MK164.001.004

Spring 2

Smoke

ITEM

FORCE

FINISHING

BOX

MK164.001.005

Spring 5

White

MK164.001.006

Spring 5

Black

MK164.001.007

Spring 5

Grey

MK164.001.008

Spring 5

Smoke

ITEM

FORCE

FINISHING

BOX

MK164.001.009

Spring 7

White

MK164.001.010

Spring 7

Black

MK164.001.011

Spring 7

Grey

MK164.001.012

Spring 7

Smoke

FURNITAL

CABINET MECHANISMS | FLAP OPENING MECHANISM FOR SHORT, DEEP CABINET

!"#$%%$&'$()&"*+" ,--.&/$)01+&+"#%$(

DOOR WEIGHT TABLES

Per informazioni riguardanti quantità minime ordinabili e colori Per informazioni riguardanti quantità minime ordinabili e colori Per informazioni Per informazioni Pera:informazioni riguardanti riguardanti quantità riguardanti quantità minime quantità minime ordinabili minime ordinabili e colori ordinabili e colorie colori personalizzati rivolgersi info@effegibrevetti.com. personalizzati rivolgersi a: info@effegibrevetti.com. personalizzati personalizzati personalizzati rivolgersi rivolgersi a:SPRING info@effegibrevetti.com. rivolgersi a: 2info@effegibrevetti.com. a: info@effegibrevetti.com. SPRING 5 DOOR HEIGHT

1PCS

2PCS

1PCS

2PCS

SPRING 7

1PCS

For information minimum quantities and custom For information aboutabout minimum orderorder quantities and custom 1.5 - 1.9 2.8order -quantities 4.7 2.5and - 3.2 4.7 and - 6.5 custom 3.6 - 4.1 120 For information For information Forinfo@effegibrevetti.com. about information about minimum minimum about order minimum quantities order quantities custom and custom contact: colorscolors pleaseplease contact: info@effegibrevetti.com. colors colors please please colors contact: contact: please info@effegibrevetti.com. contact: info@effegibrevetti.com. info@effegibrevetti.com. 1.3 - 1.8 2.6 - 3.9 1.9 - 2.5 4 - 5.5 2.9 - 3.3 150 175 200

_features

1.3 - 1.7

2-3

1.1 - 1.5

3-%%" 4'.)*0

1.6 - 2

3.2 - 4.4

H"*-K)*L1&M&8

1.8 - 2.7

5 5

1.5 - 2

3-%%" 4'.)*0

2.7 - 3.6

6 6

2.3 - 2.7 2.1 - 2.7

3-%%" 4'.)*0

2PCS 6.6 - 7 5.4 - 6.3 4.2 - 4.9 3.7 - 4.7

7 7

;<=>?@;

120

8A8&B&8A6

8A6&B&8AC

8AC&B&5A5

5A6&B&FA5

5A7&B&FA8

FAG&B&EA8

150

8&B&8AF

8AF&B&8AD

8AE&B&8A7

8AC&B&5A6

5A6&B&5AD

5AC&B&FAF

49:!

;<=>?@;

49:!

;<=>?@;

49:!

876

0,9 - 1,2

8AF&B&8A7

8AF&B&8AG

8AG&B&5

5&B&5AF

5AF&B&5A7

200

0,8 - 1,1

8A8&B&8A6

8A6&B&5

8AC&B&5AF

5A8&B&5A7

Simmetrico angolo d’apertura gio orizzontale e verticale Simmetrico Symmetric Montaggio Montaggio orizzontale Montaggio orizzontale eorizzontale verticale e verticale e verticale Symmetric g angle adjustment ntal & vertical mounting Symmetric Horizontal Horizontal &Horizontal vertical & vertical mounting & vertical mounting mounting 3-%%" kg 4'.)*0

Apertura eammortizzata chiusura ammortizzate Opening damping function Simmetrico Simmetrico Simmetrico Apertura Apertura e chiusura Apertura e chiusura ammortizzate e chiusura ammortizzate ammortizzate Opening function Openingdamping & closing damping function Symmetric Symmetric Symmetric Opening Opening & closing Opening & closing damping & closing damping function damping functionfunction H"*-K)*L1&M&5 5 5

Hp kg

3-%%" 4'.)*0 kg

6 6

3-%%" 4'.)*0 HD Hp

7 7 Hp

;<=>?@; 49:! ;<=>?@; 49:! ;<=>?@; 49:! 2' Ante da 20 fino a 48 cm zione angolo d’apertura Ante 14 da kg 12 fino a 20 cm Peso massimo anta 7 kg Peso massimo anta Ante Ante 20cm da fino Ante 2012 a fino 48 da20cm 20 cm a 48 fino cm a 48 cm Peso Peso massimo massimo Peso anta anta kgDoor’s 147Kg anta kg height 14 kg Regolazione Regolazione angolo Regolazione angolo d’apertura angolo d’apertura 120d’apertura 5A8&B&5A7 FAG&B&EA5 EA7&B&GA6 6AE&B&6AC GAG&B&7 Door’s opening angle adjustment Maximum door’s weight height from to fromDoor’s 20 toda 48 Maximum door’s weight 145AD&B&EA7 kg opening angle adjustment Door’s height from 12massimo to14 20 cm Maximum door’s weight 7 kg Door’s Door’s height Door’s height from 20 from height to 20 48 from to cm 48 20 cm to 48 cm Maximum Maximum door’s Maximum door’s weight weight door’s 14 kg weight 14 kg 14 kg Door’s Door’s opening Door’s opening angle opening angle adjustment adjustment angle adjustment 150 8AD&B&5A5 5AG&B&FAC F&B&FA6 E&B&6A6 EA5&B&EA7 6AE&B&GAF

876

8AG&B&8AC

200

8AE&B&8A7

5&B&F 8AD&B&5A7

5A6&B&5AC

FA5&B&EAE

FA7&B&EA8

EA5&B&EAC

5A5&B&5AG

5A7&B&FAG

FAF&B&FA7

FA7&B&EA7

! @!!<HIJ9H<&B&K@;HJH=

FURNITAL

141

CABINET MECHANISMS | FLAP OPENING MECHANISM FOR SHORT, DEEP CABINET

Foratura anta alluminio Aluminium door drilling _door drilling for external fixing

Ø5x13

_metal plate for door

A-8

Ø10x11

14 14

x Ø8

Z (mm)

120 - 200

60 + B

Z-8

10 + A

HD (mm)

_side panel’s drilling

6 5

Ø8

R O O D = H

90 min

90°

Ø5 x 12

14 min 73

130

_door overlay

Hp 86

Ø5

x 12

185 min

142

FURNITAL

38 38

CABINET MECHANISMS | FLAP OPENING MECHANISM FOR SHORT, DEEP CABINET

_packaging mechanism content

PACKAGING CONTENT: 10 mechanisms per box with screws and attach for doors

FURNITAL

143

_03.5

HINGES

144

FURNITAL

145

PANNELLO FISSO FIXED PANELFISSO PANNELLO FIXED PANEL

PANNELLO RIBALTA FLAP PANELRIBALTA PANNELLO FLAP PANEL

panel. The woodThe milling is hidden from the edge of coverage on both sides. precision of assembly can be adjusted on both sides.vertical The precision of The assembly bepanels adjusted in horizontal, and cross. fixing can of the is in horizontal, and Ø cross. achieved by 3vertical +3 screws 3.5 xThe 15 fixing mm. of the panels is achieved by 3 +3 screws Ø 3.5 x 15 mm.

CABINET MECHANISMS | HINGES

F360 CERNIERA PER APERTURA ANTE A RIBALTA Ø 35 F360 HINGE FOR FOLDING DOORS Ø 35 HINGES FOR FLAP OPENING Ø35

F 360

BOX

HH072.002.002 Cerniera per piani ribaltabili. Stesso schema di foratura per pannello e pannello ribalta. La fresatura nel legno viene nascosta dal bordo di copertura su entrambe le parti. La precisione di assemblaggio può essere regolata in ai pannelli è orizzontale, verticale e trasversale. Il realizzato mediante 3+3 viti 3,5 x 15 mm. Hinge flaps. Same hole pattern for fixed panel and folding panel. The wood milling is hidden from the edge of coverage on both sides. The precision of assembly can be adjusted in horizontal, vertical and cross. The fixing of the panels is achieved by 3 +3 screws Ø 3.5 x 15 mm.

200

S S

ITEM

90° 90°

2.002.00

F 360

FP FP 006 006

Placca in zama nichelata. PANNELLO RIBALTA Placca zamanickelated. nichelata. PlateFLAP inin zamak PANEL Plate in zamak nickelated. 2.00

PANNELLO FISSO FIXED PANEL

90°

FP FP 004 004

Cerniera per piani ribaltabili. Stesso schema di foratura per pannello e pannello ribalta. La fresatura nel legno viene nascosta dal bordo di copertura su entrambe le parti. La precisione di assemblaggio può essere regolata in ai pannelli è orizzontale, verticale e trasversale. Il realizzato mediante 3+3 viti 3,5 x 15 mm. Hinge flaps. Same hole pattern for fixed panel and folding panel. The wood milling is hidden from the edge of coverage on both sides. The precision of assembly can be adjusted in horizontal, vertical and cross. The fixing of the panels is achieved by 3 +3 screws Ø 3.5 x 15 mm.

Ø35

LUCE T LUCE T LIGHT T LIGHT T 0 0 1.5 1.5 3.5 3.5

SPESSORE (S) SPESSORE (S) THICKNESS (S) THICKNESS (S) 16 mm 16 mm 18 mm 18 mm 20 mm 20 mm

30 12.5

Distanziale in zama nichelata. Distanziale in zama nichelata. Spacer in zamak nickelated. Spacer in zamak nickelated. 12.00

PANNELLO RIBALTA flap door FLAP PANEL 1:4 1:4

T LUCE T LUCE

1.001.00

PANNELLO fixed FISSO panel FIXED PANEL

(S) SPESSORE (S) SPESSORE

F360 HINGE FOR FOLDING DOORS Ø 35 T T

12 12.00 12.00

F360 CERNIERA PER APERTURA ANTE A RIBALTA Ø 35

T LUCE

LIGHT T

16 mm

18 mm

1.5

20 mm

3.5

FP 004

Placca in zama nichelata. Plate in zamak nickelated.

FP 004

146

1:4

(S) SPESSORE

Placca in zama nichelata. Plate in zamak nickelated.

2.00

LUCE T

T LUCE a.

FP 006

SPESSORE (S)

LUCE T

THICKNESS (S)

LIGHT T

16 mm

18 mm

1.5

20 mm

3.5

1.00

90°

SPESSORE (S) THICKNESS (S)

12.00

1:4

1.00

(S) SPESSORE

Distanziale in zama nichelata. Spacer in zamak nickelated.

min 1.5mm

FP 006

Distanziale in zama nichelata. Spacer in zamak nickelated.

FURNITAL

PANNELLO FISSO FIXED PANELFISSO PANNELLO FIXED PANEL

PANNELLO RIBALTA FLAP PANELRIBALTA CABINET MECHANISMS | HINGES PANNELLO FLAP PANEL

HINGES FOR FLAP OPENING Ø26 Ø 26

Anta / Door

ITEM

BOX

HH072.002.003

250

S S

10,5 +0,2 0

ano / Top

2.002.00 1.001.00

10.5

LUCE T LUCE T LIGHT T LIGHT T 0 0 1.5 1.5 3.5 3.5

SPESSORE (S) SPESSORE (S) THICKNESS (S) THICKNESS (S) 16 mm 16 mm 18 mm 18 mm 20 mm 20 mm

Anta Door

23.5

Ø26

Ø4.2

T LUCE T LUCE

14 (S) SPESSORE (S) SPESSORE

T T

1:4 1:4

14 12.00 12.00

90° 90° 23,5

Placca in zama nichelata. F361 CERNIERA PER APERTURA ANTE A RIBALTAFP Ø 006 26 FP 004 Placca zamanickelated. nichelata. Plate ininzamak 16.5

FP 004

16.5

FP 006

Plate 2.2 in zamak nickelated.

F361 HINGE FOR FOLDING DOORS Ø 26

vite di regolazione adjustingadjustment screw

/ DOOR

24mm

25mm

26mm

5.7

6.7

7.7

3.7

4.7

5.7

1.7

2.7

3.7

Spazio necessario per apertura ante a ribalta ( T)

3.7

4.7

5.7

1.7

2.7

3.7

Necessary space for opening the door without touching an adiacent door or carcase side ( T)

0.7

1.7

TYPE

Distanziale in zama nichelata. Distanziale in zama nichelata. Spacer in zamak nickelated. Spacer in zamak nickelated.

vite di bloccaggio

locking locking screw

F361ASP44

F358/0-4

TYPE

62 998752 r.a. - Fax 0362 998730 - www.danco.it - e-mail: danco@danco.it

Anta a. / Door

Piano / Top

F358/2-4

Piano / Top

Anta / Door

1,5

18 ÷ 20

min 1.5mm

18 ÷ 20

1,5

Anta / Door

Piano Sp. 20 mm Top Thick 20 mm

FURNITAL

18 ÷ 20

Piano Sp. 18 mm Top Thick 18 mm

147

148

FURNITAL

_04 WARDROBE EQUIPMENT

149

_04.1

WARDROBE LIFT

_04.1 Wardrobe lift _04.2 Pull-out and fixed accessories

150

FURNITAL

151

WARDROBE EQUIPMENT | WARDROBE LIFT

SINGLE WARDROBE LIFT WITH LOAD CAPACITY 12KG

ITEM

SPECIFICATIONS

FINISHING

LOAD CAP. (Kg)

BOX

WA062.007.002

Left

Grey

WA062.007.003

Right

Grey

SERIES/PRODUCT SERIES/PRODUCT

CODE CODE

SerieSerie Lift Lift 101/A (R) 101/A (R)

Lift Lift SERIES/PRODUCT

PIECES PER BOX

CODE

Serie Lift

102/A (L) 102/A (L)

PIECES PER CARTON

PIECES 103/A (spacer) 103/A (space PER PALLET

450 - 550 450 - 550

102/A (L)

96 900

680

680 810

103/A (spacer)

900

810

Lift

101/A (R)

900

680

810

450 - 550

225

SPACER

225

WA062.007.001

WIDTH (mm)

BOX

102/A 102/A101/A 101/A 100-120 CM

50-60 CM

84 CM

102/A

152

101/A

FURNITAL

84 CM

ITEM

84 CM

100-120 100-120 CM CM 50-60 CM 50-60 CM

WARDROBE EQUIPMENT | WARDROBE LIFT

WARDROBE LIFT WITH LOAD CAPACITY 10KG

ITEM

FINISHING

WIDTH (mm)

LOAD CAP. (Kg)

BOX

WA062.005.001

Grey

750 - 1150

WA062.005.002

Grey

500 - 750

The horizontal tube is telescopic.

SERIES/PRODUCT SERIES/PRODUCT

PIECES PIECES PER PER PIECES PIECES PIECES PIECES BOX BOX PER CARTON PER CARTON PER PALLET PER PALLET

CODECODE

Serie Serie Lift Lift 300/A300/A

Lift Lift 300300 PIECES PER CARTON

301/A301/A (spacer) (spacer)

PIECES PER PALLET

144 144

36 36 SERIES/PRODUCT

CODE

Serie Lift

500 - 750 500 - 750 750 - 1150 750 - 1150

300/A

Lift 300

301/A (spac

910

270

600

500 - 750 750 - 1150

270 35

910

540

36 600

PIECES PER BOX

SPACER 55

cm 202 cm 202

FURNITAL

ITEM

WIDTH (mm)

BOX

WA062.005.003

cm 202

153

WARDROBE EQUIPMENT | WARDROBE LIFT

WARDROBE LIFT WITH LOAD CAPACITY 10KG

ITEM

FINISHING

WIDTH (mm)

LOAD CAP. (Kg)

BOX

WA062.006.001

Grey

750 - 1150

WA062.006.003

Grey

500 - 750

SERIES/PRODUCT

CODE

PIECES PER BOX

PIECES PER CARTON

PIECES PER PALLET

500/A

144

Serie Lift Lift 500

501/A (spacer)

36 SERIES/PRODUCT

CODE

Serie Lift

500 - 750 750 - 1150

500/A

Lift 500

910

600

540

500 - 750 750 - 1150

180

280

910

501/A (spa

SPACER 55

cm 202 ITEM

WIDTH (mm)

BOX

WA062.006.002

501/A

cm 202

501/A

154

FURNITAL

WARDROBE EQUIPMENT | WARDROBE LIFT

WARDROBE LIFT WITH LOAD CAPACITY 15KG

ITEM

FINISHING

WIDTH (mm)

LOAD CAP. (Kg)

BOX

WA062.004.001

Grey

750 - 1150

WA062.004.002

Grey

500 - 750

SERIES/PRODUCT

CODE

PIECES PER BOX

PIECES PER CARTON

700/A

PIECE PER PAL

Serie Lift Lift 700 PIECES PER BOX

PIECES PER CARTON

701/A (spacer)

PIECES PER PALLET

Serie Lift 40

144

Lift 700

700

910

380

pacer)

SERIES/PRODUCT 500 - 750 750 - 1150

120

75-115 CM 280

4 CM

54 CM

60 CM

15 Kg

91 CM

700/A

SPACER 28 CM

18 CM 6 CM ITEM

WIDTH (mm)

WA062.004.003

BOX

700/A

FURNITAL

155

WARDROBE EQUIPMENT | WARDROBE LIFT

WARDROBE LIFT WITH LOAD CAPACITY 20KG

ITEM

FINISHING

WIDTH (mm)

LOAD CAP. (Kg)

BOX

WA062.003.001

Grey

750 - 1150

WA062.003.004

Grey

500 - 750

SERIES/PRODUCT SERIES/PRODUCT

CODE

151/A

PIECES PER PIECES PIECES PER PIE BOX BOX PER CARTON PER CA P

Serie Lift Serie Lift STRENGHT REGULATING DEVICE

Superlift Superlift

CES PER BOX

PIECES PER CARTON

152/A (spacer) 152/A (spacer)

PIECES PER PALLET

UPRIGHT 1 REGULATING DEVICE

153/ASERIES/PRODUCT (wall153/A clamp) (wall clamp)

6CODE

Serie Lift

500 - 750 500 - 750 750 - 1150 750 - 1150

300/A

Lift 300

301/A (spacer)

760

510

PIECES PER CARTON 290

PIECES PER BOX

PIECES PER PALLET 35

910

CODE

500 - 750 750 - 1150

290

SERIES/PRODUCT

910

510

151/A SPACER

Superlift

152/A (spacer) 6 CM

ITEM 6 CM 153/A (wall 10clamp) CM 10 CM 67-109 CM 67-109 CM

WA062.003.002

WIDTH (mm)

6 32.5 CM

BOX

32.5 CM 51 CM

500 - 750 750 - 1150

cm 202

910

151/A 40

153/A 151/A

760

510

29 CM

151/A

42.5 CM

153/A

153/A 92 CM

51 CM

29 CM

Serie Lift

92 CM

156

290

ApplicazioneApplicazione in serie su staffa in serie / Application su staffa / in Ap

FURNITAL

WARDROBE EQUIPMENT | WARDROBE LIFT

WALL LIFT WITH LOAD CAPACITY 10KG

SERIES/PRODUCT SERIES/PRODUCT

ITEM

FINISHING

WIDTH (mm)

LOAD CAP. (Kg)

BOX

WA062.002.001

Grey

750 - 1150

WA062.002.002

Grey

500 - 750

CODE CODE

PIECES PIECES PERPER PIECES PIECES PIECES PIECES BOXBOX PERPER CARTON CARTON PERPER PALLET PALLET

Serie Serie Lift Lift Wall Wall Lift Lift

800/A 800/A

500 -500 750- 750 - 1150 750 -750 1150

6 6

72 72

350 300

750

350 300

910

350 350

195 195 55 55

FURNITAL

720 720

157

_04.2

PULL-OUT AND FIXED ACCESSORIES

_04.1 Wardrobe lift _04.2 Pull-out and fixed accessories

158

FURNITAL

159

20 C 20 CM

121/A

9 CM

WARDROBE EQUIPMENT | PULL-OUT AND FIXED ACCESSORIES SERIES/PRODUCT 112 CM

21 CM

CODE

PIECES PER PACKAGE

PIECES PER BOX

PIECES PER PALL

Appendi Accessori Appendi Cravatte

PULL-OUT TIE RACK 117/A

ITEM

FINISHING 41 CM

648

162

WA060.001.002

141/A

Grey

LENGTH (mm)

BOX

510

9 CM

20 CM

3 CM

141/A 142/A

Frontale. *applicato sul guida / Front application on runner

5.5 CM

3 CM

Fisso Estraibile

112 CM

20 CM

13 CM

510

160

SERIES/PRODUCT

CODE

Appendi Cinture

117/A

142/A

Laterale. *applicato sul guida / Side application on runner

PULL-OUT BELTS HANGER

PIECES PER CARTON

410

Appendi 510 Accessori 1.5 CM

PIECES PER BOX

Fisso

161/A

Estraibile

162/A

estr

5.5 CM

45 CM

Ambos | Te ch n ic a l I nf o r ma t i

FINISHING 161/A

LENGTH (mm)

BOX

WA105.002.001

Grey

510

ITEM

510

CODE

PIECES PER BOX

PIECES PER CARTON

PIECES PER PALLET

161/A

648

162/A

162

CODE

PIECES PER BOX

PIECES PER CARTON

Fisso

181/A

Estraibile

182/A

SERIES/PRODUCT

Appendi 510 Accessori Svuota Tasche

410

162/A

5.5 CM

PULL-OUT CATCH-ALL TRAY

ITEM

45 CM FINISHING

181/A

WA106.002.001

Grey

BOX

510

fisso

LENGTH (mm)

510 160 85

118

410

510

410

182/A

160

estraibile

FURNITAL

WARDROBE EQUIPMENT | PULL-OUT AND FIXED ACCESSORIES

PULL-OUT SINGLE TROUSER HOLDER

ITEM

FINISHING

SERIES/PRODUCT SERIES/PRODUCT Grey WA096.002.002

LENGTH (mm)

CODE

510

BOX

PIECES PER CODE BOX

407/A Portapantaloni Portapantaloni Centrale Centrale

PIECES PIECES PER PIECES PIECES 6 CARTON PER CARTON BOX PER PER PALLET

407/A 1

6 1

820 355

355

CODE CODE

Portapantaloni Portapantaloni Centrale Centrale

407/A 407/A

66 6

820 510

510

SERIES/PRODUCT SERIES/PRODUCT

PIECES PER PALLET

PIECES PIECES PER PER PIECES PIECES PIECES PIECES BOXBOX PER PER CARTON CARTON PER PER PALLET PALLET

66 66

PULL-OUT DOUBLE TROUSER HOLDER 82 CM 82 CM 35.5 CM 35.5 CM

51 CM51 CM

ITEM

FINISHING

LENGTH (mm)

BOX

10 10 WA096.002.003

Grey

510

10 10

SERIES/PRODUCT SERIES/PRODUCT

CODE CODE

Portapantaloni Portapantaloni Centrale Centrale Doppio Doppio

409/A 409/A

PIECES PIECES PER PER PIECES PIECES PIECES PIECES BOXBOX PER PER CARTON CARTON PER PER PALLET PALLET

30 30

820 820 680 680

510 510

24 24

FURNITAL

161

WARDROBE EQUIPMENT | PULL-OUT AND FIXED ACCESSORIES

220/A

PULL-OUT FRONTAL HANGER RACK SERIES/PRODUCT

CODE

Porta Abiti LENGTH FINISHING

ITEM

PIECES PE PACKAG

BOX

(mm)

Portagrucce Grey 510

405/A 6

WA107.001.001

820 510

405/A

114

BOOTS HOLDER

ECESPIECES PER PERPIECESPIECES PIECESPIECES BOX BOXPER CARTON PER CARTON PER PALLET PER PALLET

720

480 480

1080 1080

720

SERIES/PRODUCT SERIES/PRODUCT ITEM

FINISHING

WA059.002.001

Grey

WIDTH (mm)

CODECOD

DEPTH (mm)

BOX

Appendi Appendi Accessori Accessori 100 130 60 Appendi Appendi Stivali Stivali 100

720

100

121/A 121

20 CM

20 CM 20 CM

130

20 CM

130

18 pair/coppia 18 pair/coppia a)pair/coppia 1 pair/coppia

SERIES/PRODUCT SERIES/PRODUCT

CODECOD

Appendi Appendi Accessori Accessori Appendi Appendi Cravatte Cravatte

117/A 117/A

141/A 141

Estraibile Estraibile

142/A 142

5.5 CM

tale.Frontale. *applicato *applicato sul guidasul / Front guidaapplication / Front application on runner on runner

FissoFisso

41 CM 41 CM

20 CM

162

3 CM

141/A 141/A

FURNITAL

WARDROBE EQUIPMENT | PULL-OUT AND FIXED ACCESSORIES

CLOTHES HANGERS

ITEM

SPECIFICATIONS

FINISHING

LENGTH (mm)

BOX

WA076.001.002

Telescopic tube

Chrome

880 - 1590

WA076.002.003

Fixed tube

Chrome

890

PULL-OUT CLOTHES HANGER SERIES/PRODUCT ITEM

WA096.004.002

FINISHING

CODE LENGTH (mm)

BOX

Altri Prodotti245 Chrome

PIECES PER BOX

P PER

PIECES PER BOX

P PER

Mini Tubo

171/A

245 18

120

SERIES/PRODUCT

CODE

Altri Prodotti Tele Tubo

FURNITAL

170/A

163

WARDROBE EQUIPMENT | PULL-OUT AND FIXED ACCESSORIES

SHOE RACK WITH FRONT FIXING

ITEM

FINISHING

LENGTH (mm)

DEPTH (mm)

BOX

WA059.001.001

Chrome

480 - 830

210

WA059.001.002

Chrome

830 - 1130

210

SERIES/PRODUCT SERIES/PRODUCT

CODE

PIECES PER PIECES PIECES PER PIECES PIECES PIECES BOX BOX PER CARTON PER CARTON PER PALLET PER PALLET

Appendi Appendi Accessori Accessori FrontaleFrontale Appendi Appendi ScarpeScarpe LateraleLaterale

111/A (small) 111/A (small)

60 720

720

112/A (large) 112/A (large)

60 480

480

115/A (small) 115/A (small)

60 1080

1080

116/A (large) 116/A (large)

60 720

720

200

18 pair/coppia 18 pair/coppia 117/A (runner/guida) 117/A (runner/guida) 1 pair/coppia1 pair/coppia

200

1120

210 1120

210

480 - 830 90

480 - 830

200

830 - 1130 830 - 1130

Applicazione laterale / Side application on runner / seitlicher Anbau / Aplicación lateral / Montage latéral

Applicazione frontale / Front application on runner / frontaler Anbau / Aplicación frontal / Montage frontal

RUNNER 830 - 1130 830 - 1130 30

200

1120

Applicazione su guida in alluminio / Aluminum runner / Anbau auf Aluminium Führungsschiene / Aplicación en guía de aluminio / Montage en aluminium

Ambos | A ppe ndi A cce ssori

164

1120

130

1120

Particolare attacco / Detailed view / Befestigung / Detalle enganche / Lien spécial

BOX

200

130

HEIGHT (mm)

200

WA059.001.003

200

ITEM 90

480 - 830

FURNITAL

Laterale. *applicato Laterale. sul*applicato guida / Side sul application guida / Sideon application runner on runne

Appendi Accessori 6 CODE6

112/A (large)

(small) WARDROBE EQUIPMENT | PULL-OUT AND FIXED115/A ACCESSORIES

LateraleAccessori116/A (large) Appendi

6 (small) 117/A (runner/guida) 111/A 1 pair/coppia

Frontale

112/A (large)

60 6 18 pair/coppia 6

116/A (large)

117/A (runner/guida)

1 pair/coppia

ITEM

FINISHING

LENGTH (mm)

DEPTH (mm)

BOX

WA059.003.001

Chrome

480 - 830

130

830 210 - 1130 WA059.003.002

Chrome

830 - 1130

130

18 pair/coppia

1120

720 60

115/A (small)

Laterale

480 - 830

720 PIECES 480 PER CARTON 1080

200

Appendi SHOE RACK WITH LATERAL FIXINGScarpe 830 - 1130

60 PIECES PER 60 BOX 60

200

Appendi Scarpe

111/A (small)

Frontale SERIES/PRODUCT

480 - 830

1120

210

830 - 1130

200

480 - 830

830 - 1130 130

200

1120

200

1120

130

200

480 - 830

RUNNER

Laterale. *applicato sul guida / Side application on runner

116

ITEM

HEIGHT (mm) BOX Laterale. *applicato sul guida / Side app

WA059.001.003

1120

116

FURNITAL

165

166

FURNITAL

_05 KITCHEN EQUIPMENT

167

_05.1

STAINLESS STEEL DISH RACK

_05.1 Stainless steel dish rack _05.2 Waste bin _05.3 Rubber mat

168

FURNITAL

169

KITCHEN EQUIPMENT | STAINLESS STEEL DISH RACK

STAINLESS STEEL DISH RACK

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.001.009

With springs

360

KA013.001.010

With springs

410

KA013.001.011

With springs

460

KA013.001.012

With springs

560

KA013.001.013

With springs

660

KA013.001.014

With springs

760

KA013.001.015

With springs

860

KA013.001.016

With springs

960

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.002.009

With screws

360

KA013.002.010

With screws

410

KA013.002.011

With screws

460

KA013.002.012

With screws

560

KA013.002.013

With screws

660

KA013.002.014

With screws

760

KA013.002.015

With screws

860

KA013.002.016

With screws

960

Stainless steel draining board made by steel AISI 304 inox 18/10, composed by dish rack, glass rack and drip tray.

Ø10

224

170

FURNITAL

KITCHEN EQUIPMENT | STAINLESS STEEL DISH RACK

STAINLESS STEEL DISH RACK - TMX

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.001.001

With springs

360

KA013.001.002

With springs

410

KA013.001.003

With springs

460

KA013.001.004

With springs

560

KA013.001.005

With springs

660

KA013.001.006

With springs

760

KA013.001.007

With springs

860

KA013.001.008

With springs

960

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.002.001

With screws

360

KA013.002.002

With screws

410

KA013.002.003

With screws

460

KA013.002.004

With screws

560

KA013.002.005

With screws

660

KA013.002.006

With screws

760

KA013.002.007

With screws

860

KA013.002.008

With screws

960

Stainless steel draining board composed by dish rack and glass rack made by steel AISI 430 18/C and drip tray made by steel AISI 304 inox 18/10.

Ø10

224

FURNITAL

171

KITCHEN EQUIPMENT | STAINLESS STEEL DISH RACK

STAINLESS STEEL DISH RACK - PLX 18

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.008.002

With springs

410

KA013.008.003

With springs

460

KA013.008.004

With springs

560

KA013.008.005

With springs

660

KA013.008.006

With springs

760

KA013.008.007

With springs

860

KA013.008.008

With springs

960

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.007.002

With screws

410

KA013.007.003

With screws

460

KA013.007.004

With screws

560

KA013.007.005

With screws

660

KA013.007.006

With screws

760

KA013.007.007

With screws

860

KA013.007.008

With screws

960

Stainless steel draining board made by steel AISI 304 inox 18/10 composed by dish rack, glass rack and drip tray. The dish rack is fixed directly to the glass rack to limit the height, making it ideal for low-height hanging cabinets.

Ø10

224

172

FURNITAL

KITCHEN EQUIPMENT | STAINLESS STEEL DISH RACK

STAINLESS STEEL DISH RACK - AS-LX

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.006.001

With springs

360

KA013.006.002

With springs

410

KA013.006.003

With springs

460

KA013.006.004

With springs

560

KA013.006.005

With springs

660

KA013.006.006

With springs

760

KA013.006.007

With springs

860

KA013.006.008

With springs

960

ITEM

SPECIFICATIONS

WIDTH (mm)

BOX

KA013.005.001

With screws

360

KA013.005.002

With screws

410

KA013.005.003

With screws

460

KA013.005.004

With screws

560

KA013.005.005

With screws

660

KA013.005.006

With screws

760

KA013.005.007

With screws

860

KA013.005.008

With screws

960

Stainless steel draining board made by steel AISI 304 inox 18/10 composed by dish rack, glass rack and drip tray. The design and the industrialisation of the production process guarantee resilience, easy assembly and high standards of quality. To attach it to the wall unit there are retractable and screw supports.

Ø10

224

FURNITAL

173

_05.2

WASTE BIN

_05.1 Stainless steel dish rack _05.2 Waste bin _05.3 Rubber mat

174

FURNITAL

175

KITCHEN EQUIPMENT | WASTE BIN

SQUARE SWING-OUT WASTE BINS FOR DOOR CABINET

SWING OUT WASTE BIN 12 LT.

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.089

Anthracite

340 x 260 x 240

12 Lt.

240

340 260

176

FURNITAL

KITCHEN EQUIPMENT | WASTE BIN

SWING OUT WASTE BIN 15 LT.

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.088

Anthracite

340 x 260 x 300

15 Lt.

300

340 260

SWING OUT WASTE BIN 18 LT.

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.087

Anthracite

340 x 260 x 360

18 Lt.

360

340 260

SWING OUT WASTE BIN 24 LT.

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.086

Anthracite

340 x 260 x 460

24 Lt.

460

340 260

FURNITAL

177

KITCHEN EQUIPMENT | WASTE BIN

ROUND SWING-OUT WASTE BINS FOR DOOR CABINET

ROUND PLASTIC WASTE BIN

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.001

Grey

270 x 270 x 320

10 Lt.

320

270 270

178

FURNITAL

KITCHEN EQUIPMENT | WASTE BIN

ROUND STAINLESS STEEL WASTE BIN

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.003

Stainless Steel

270 x 270 x 320

10 Lt.

320

270 270

ROUND ALUMINIUM WASTE BIN

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.004

Aluminium

270 x 270 x 320

10 Lt.

320

270 270

FURNITAL

179

KITCHEN EQUIPMENT | WASTE BIN

PULL-OUT WASTE BIN FIXED ON CABINET DOOR WITH FULL EXTENSION CONCEALED SLIDES SOFT CLOSE

*for side panel thickness from 16 to 19mm, with 3D adjustment of the door

WASTE BIN FIXED ON CABINET DOOR - MODULE 300

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.005.001

Anthracite

263 x 478 x 535

35 Lt.

535

263

180

FURNITAL

478

KITCHEN EQUIPMENT | WASTE BIN

WASTE BIN FIXED ON CABINET DOOR - MODULE 450

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.005.002

Anthracite

413 x 478 x 535

35 + 35 Lt.

535

478

413

WASTE BIN FIXED ON CABINET DOOR - MODULE 600

ITEM

KA015.005.004

FINISHING Anthracite

MEASURE (mm)

BINS

BOX

563 x 478 x 535

35 + 35 +8+8 Lt.

535

563

478

WASTE BIN FIXED ON CABINET DOOR - MODULE 600 REDUCED DEPTH

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.005.003

Anthracite

563 x 358 x 345

18 + 18 Lt.

345

563

FURNITAL

358

181

KITCHEN EQUIPMENT | WASTE BIN

UNDER DRAWER WASTE BINS

PLASTIC WASTE BIN FOR DRAWER - MODULE 600

ITEM

FINISHING

MODULE (mm)

BINS

BOX

KA015.001.023

Anthracite

600

12 + 12 Lt.

220

460/490 510/530

182

FURNITAL

KITCHEN EQUIPMENT | WASTE BIN

PLASTIC WASTE BIN FOR DRAWER - MODULE 800

ITEM

FINISHING

MODULE (mm)

BINS

BOX

KA015.001.027

Anthracite

800

12 + 12 + 12 Lt.

220

460/490

710/730

PLASTIC WASTE BIN FOR DRAWER - MODULE 900

ITEM

FINISHING

MODULE (mm)

BINS

BOX

KA015.001.024

Anthracite

900

12 + 12 + 12 + 12 Lt.

220 460/490

810/830

PLASTIC WASTE BIN FOR DRAWER - MODULE 1200

ITEM

FINISHING

MODULE (mm)

BINS

BOX

KA015.001.025

Anthracite

1200

12 + 12 + 12 + 12 Lt.

220

460/490

1110/1130

FURNITAL

183

KITCHEN EQUIPMENT | WASTE BIN

UNDER DRAWER WASTE BIN WITH METAL CARCASS

WASTE BIN FOR DRAWER - MODULE 600

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.001.028

Anthracite

510 x 472 x 220

12 + 12 Lt.

220

472 510

184

FURNITAL

KITCHEN EQUIPMENT | WASTE BIN

WASTE BIN FOR DRAWER - MODULE 900

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.001.029

Anthracite

810 x 472 x 220

12 + 12 + 12 Lt.

220

472 810

WASTE BIN FOR DRAWER - MODULE 1200

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.001.030

Anthracite

1110 x 472 x 220

12 + 12 + 12 + 12 Lt.

220

472 1110

FURNITAL

185

KITCHEN EQUIPMENT | WASTE BIN

PULL-OUT WASTE BINS WITH FULL EXTENSION SLIDES

PULL-OUT PLASTIC WASTE BIN - H. 360

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.095

Anthracite

300 x 450 x 360

18 + 18 Lt.

360

450 300

186

FURNITAL

KITCHEN EQUIPMENT | WASTE BIN

PULL-OUT PLASTIC WASTE BIN - H. 360

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.096

Anthracite

300 x 450 x 360

18 + 8 + 8 Lt.

360

450

300

PULL-OUT PLASTIC WASTE BIN - H. 460

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.097

Anthracite

300 x 450 x 460

24 + 24 Lt.

460

450

300

PULL-OUT PLASTIC WASTE BIN - H. 460

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.098

Anthracite

300 x 450 x 460

24 + 8 + 8 Lt.

460

450

FURNITAL

300

187

KITCHEN EQUIPMENT | WASTE BIN

PULL-OUT METAL WASTE BIN

SINGLE PULL-OUT STEEL WASTE BIN

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.093

Steel

250 x 410 x 395

17 Lt.

395

410

188

FURNITAL

250

KITCHEN EQUIPMENT | WASTE BIN

DOUBLE PULL-OUT STEEL WASTE BIN

ITEM

FINISHING

MEASURE (mm)

BINS

BOX

KA015.002.092

Steel

250 x 460 x 410

16 + 10 Lt.

410

460

FURNITAL

250

189

_05.3

RUBBER MAT

_05.1 Stainless steel dish rack _05.2 Waste bin _05.3 Rubber mat

190

FURNITAL

191

KITCHEN EQUIPMENT | RUBBER MAT

CORRUGATED RUBBER MAT IN ROLLS

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.003.015

Anthracite

473

1.2

KA019.003.005

Black

473

1.2

KA019.003.024

Dark Grey

473

1.2

KA019.003.003

Light Grey

473

1.2

KA019.003.004

White

473

1.2

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.003.014

Anthracite

480

1.2

KA019.003.012

Black

480

1.2

KA019.003.010

Dark Grey

480

1.2

KA019.003.009

Light Grey

480

1.2

KA019.003.013

White

480

1.2

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.005.004

Anthracite

473

1.2

KA019.005.025

Black

473

1.2

KA019.005.024

Dark Grey

473

1.2

KA019.005.006

Light Grey

473

1.2

KA019.005.005

White

473

1.2

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.005.010

Anthracite

480

1.2

KA019.005.022

Black

480

1.2

KA019.005.021

Dark Grey

480

1.2

KA019.005.012

Light Grey

480

1.2

KA019.005.011

White

480

1.2

TEXTILE RUBBER MAT IN ROLLS

192

FURNITAL

KITCHEN EQUIPMENT | RUBBER MAT

PIMPLE RUBBER MAT IN ROLLS

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.001.123

Anthracite

473

1.2

KA019.001.132

Black

473

1.2

KA019.001.133

Dark Grey

473

1.2

KA019.001.122

Light Grey

473

1.2

KA019.001.126

White

473

1.2

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.001.099

Anthracite

480

1.2

KA019.001.096

Black

480

1.2

KA019.001.094

Dark Grey

480

1.2

KA019.001.093

Light Grey

480

1.2

KA019.001.097

White

480

1.2

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.004.008

Anthracite

473

1.7

KA019.004.009

Black

473

1.7

KA019.004.010

Dark Grey

473

1.7

KA019.004.011

Light Grey

473

1.7

KA019.004.012

White

473

1.7

ITEM

FINISHING

MEASURE (mm)

THICKNESS (mm)

BOX (mtl)

KA019.004.007

Anthracite

480

1.7

KA019.004.005

Black

480

1.7

KA019.004.004

Dark Grey

480

1.7

KA019.004.003

Light Grey

480

1.7

KA019.004.001

White

480

1.7

WATER PROTECTION RUBBER MAT IN ROLLS

FURNITAL

193

194

FURNITAL

_06 ELECTRICAL PRODUCTS

195

_06.1

BUILT IN SOCKET

_06.1 Built in socket _06.2 Lamps

196

FURNITAL

197

_technical information

IROSAN IROSAN IROSAN

Installation Installation Installation instructions instructions instructions - -Please -Please Please keep keep keep safe safe safe Conserver Conserver Conserver les les les instructions instructions instructions de de de montage montage montage s’il s’il s’il vous vous vous plait plait plait

Montageanleitung Montageanleitung Montageanleitung - -Bitte -Bitte Bitte aufbewahren aufbewahren aufbewahren SiSiSi prega prega prega dididi conservare conservare conservare lelele istruzioni istruzioni istruzioni dididi montaggio montaggio montaggio Por Por Por favor favor favor conserve conserve conserve las las las instrucciones instrucciones instrucciones para para para elelel montaje montaje montaje

Enot Export BP8-2 - 09/02/2015 Enot Export BP8-2 - 09/02/2015 Enot Export BP8-2 - 09/02/2015

ELECTRICAL PRODUCTS | BUILT IN SOCKET

GENERAL FEATURES: TESTED ON 40.000 CYCLES

ToTosafely Tosafely safely make make make ananelectrical anelectrical electrical connection connection connection (article (article (article 2 2D.B.T.) 2D.B.T.) D.B.T.) : Be : Be : Be sure sure sure tototo turn turn turn off off off the the the power power power ofofof the the the housing. housing. housing. Pour Pour Pour effectuer effectuer effectuer ununraccordement unraccordement raccordement électrique électrique électrique enentoute entoute toute sécurité sécurité sécurité . .Veillez .Veillez Veillez à àcouper àcouper couper l’alimentation l’alimentation l’alimentation générale générale générale de de de l’habitation. l’habitation. l’habitation.

FITS WORKTOPS FROM 5 UP TO 38MM

Alle Alle Alle Montagearbeiten Montagearbeiten Montagearbeiten imimspannunglosen imspannunglosen spannunglosen Zustand Zustand Zustand durchführen durchführen durchführen . .Es.EsEs sind sind sind die die die jeweiligen jeweiligen jeweiligen gültigen gültigen gültigen VDE VDE VDE Richtlinien Richtlinien Richtlinien zu zu zu beachten. beachten. beachten.

PIVOTING COVER “TOUCH TO OPEN” SYSTEM

Per Per Per affettuare affettuare affettuare lalaconnessione laconnessione connessione elettrica elettrica elettrica dell’apparecchio dell’apparecchio dell’apparecchio ininmodo inmodo modo sicuro, sicuro, sicuro, assicurarsi assicurarsi assicurarsi didispegnere dispegnere spegnere l’alimentazione l’alimentazione l’alimentazione principale. principale. principale.

MOUNTING ON VERTICAL AND HORIZONTAL PANEL

Para Para Para hacer hacer hacer una una una conexion conexion conexion electrica electrica electrica segura, segura, segura, asegurese asegurese asegurese de de de apagar apagar apagar lalaalimentacion laalimentacion alimentacion principal. principal. principal.

SIMPLE MILLING IN THE PANELS 135 X 60MM

IROSAN

Installation instruct

TEMPLATE FOR MILLING INCLUDED IN PACKAGING Conserver

BP8-2 BP8-2 BP8-2

Enot Export BP8-2 - 09/02/2015

16A - 230V - 3600W MAX

allation instructions - Please keep safe

server les instructions de montage s’il vous plait

tageanleitung - Bitte aufbewahren

ega di conservare le istruzioni di montaggio 3680 3680 3680 W WMAX WMAX MAX

avor conserve las instrucciones para el montaje 1616A 16A- A 230 - 230 - 230 V,V,2V,2P+T 2P+T P+T

les instru

Montageanleitung -

Si prega di conserva

Por favor conserve l

To safely make an electrical connection (article 2 D.B.T.) : Be sure to

Pour effectuer un raccordement électrique en toute sécurité . Veillez à c

IROSAN IROSAN

instructions - Please keep safe écurité . Veillez à couper Installation l’alimentation générale de l’habitation.

Alle Montagearbeiten im spannunglosen Zustand durchführen. Es sin

Per affettuare la connessione elettrica dell’apparecchio in modo sicuro, Enot Export BP8-2 - 09/02/2015

D.B.T.) : Be sure to turn off the power of the housing.

Si prega di conservare le istruzioni di montaggio Montageanleitung - Bitte aufbewahren

Enot Export BP8-2 - 09/02/2015

Para hacer una conexion electrica segura, asegurese de apagar l Conserver les instructions de montage s’il vous plait Installation instructions - Please keep safe - Bitte aufbewahren durchführen. Es1 sind die Montageanleitung jeweiligen gültigen VDE Richtlinien zu beachten. Conserver les instructions de montage s’il vous plait 2 3

Por favor conserve las instrucciones para el montaje cchio in modo sicuro, assicurarsi di spegnere l’alimentazione Si prega di conservare le istruzioni diprincipale. montaggio Por favor conserve las instrucciones para el montaje

urese de apagar la alimentacion principal.

BP8-2

To safely make an electrical connection (article 2 D.B.T.) : Be sure to turn off the power of the housing. Pour effectuer un raccordement électrique sécurité . Veillez(article à couper l’alimentation générale l’habitation. To safely makeen antoute electrical connection 2 D.B.T.) : Be sure to turn offde the power of the housing.

Alle Montagearbeiten im spannunglosen durchführen . Esensind jeweiligen Richtliniengénérale zu beachten. Pour effectuer unZustand raccordement électrique toutedie sécurité . Veillezgültigen à couperVDE l’alimentation de l’habitation.

BP8-2

Ø130

Per affettuare la connessione elettrica dell’apparecchio in modo sicuro, assicurarsi di. spegnere l’alimentazione principale. Alle Montagearbeiten im spannunglosen Zustand durchführen Es sind die jeweiligen gültigen VDE Richtlinien zu beachten.

Para hacer una conexion Per electrica segura, asegureseelettrica de apagar la alimentacion principal. affettuare la connessione dell’apparecchio in modo sicuro, assicurarsi di spegnere l’alimentazione principale.

1.8

Para hacer una conexion electrica segura, asegurese de apagar la alimentacion principal. BP8-2

45.7

BP8-2

from 15mm to 38mm

146

3680 W MAX

3680 W MAX 16 A - 230 V, 2 P+T

16 A - 230 V, 2

3680 W MAX 16 A - 230 V, 2 P+T

135

3680 W MAX

16 A - 230 V, 2 P+T

198

FURNITAL

ELECTRICAL PRODUCTS | BUILT IN SOCKET

BUILT IN SOCKET BRUSHED CHROME

ITEM

PLUG TYPE

BOX

LH077.001.001

French

LH077.001.003

Schuko

ITEM

PLUG TYPE

BOX

LH077.001.005

French

USB

LH077.001.007

Schuko

USB

ITEM

PLUG TYPE

BOX

LH077.001.002

French

LH077.001.004

Schuko

ITEM

PLUG TYPE

BOX

LH077.001.006

French

USB

LH077.001.008

Schuko

USB

BUILT IN SOCKET MATT BLACK

FURNITAL

199

ELECTRICAL PRODUCTS | BUILT IN SOCKET

_technical information

GENERAL FEATURES: WITH SOFT CLOSING SYSTEM OF THE COVER FITS WORKTOPS FROM 5 UP TO 45MM MOUNTING ON VERTICAL AND HORIZONTAL PANEL SIMPLE MILLING IN THE PANELS Ø70MM 16A - 230V - 3600W MAX

2.6

Ø85

from 5mm to 45mm

200

FURNITAL

ELECTRICAL PRODUCTS | BUILT IN SOCKET

ROUND BUILT-IN SOCKET BRUSHED CHROME

ITEM

PLUG TYPE

BOX

LH077.002.004

French

USB

LH077.002.006

Schuko

USB

ITEM

PLUG TYPE

BOX

LH077.002.005

French

USB

LH077.002.007

Schuko

USB

ROUND BUILT-IN SOCKET MATT BLACK

FURNITAL

201

_06.2

LAMPS

_06.1 Built in socket _06.2 Lamps

202

FURNITAL

203

ELECTRICAL PRODUCTS | LAMPS

SLIM LAMP WITH BATTERY AND MOTION SENSOR

ITEM

COLOR TEMPERATURE

FINISHINGS

BOX

LH091.003.005

3000K

Brown Metal Grey

LH091.003.006

3000K

Silver Lead

LH091.003.007

3000K

Zirconio

LH091.003.008

3000K

Black

LH091.003.001

4000K

Brown Metal Grey

LH091.003.002

4000K

Silver Lead

LH091.003.003

4000K

Zirconio

LH091.003.004

4000K

Black

USB micro cable included.

battery status indicator

141.5

motion sensor

POWER SUPPLY

204

ITEM

SPECIFICATIONS

TYPE

BOX

LH091.003.900

1A 100-240V

EU version

LH091.003.901

1A 100-240V

US version

FURNITAL

ELECTRICAL PRODUCTS | LAMPS

SLIM LAMP WITH BATTERY AND TOUCH SENSOR

ITEM

COLOR TEMPERATURE

FINISHINGS

BOX

LH091.003.013

3000K

Brown Metal Grey

LH091.003.014

3000K

Silver Lead

LH091.003.015

3000K

Zirconio

LH091.003.016

3000K

Black

LH091.003.009

4000K

Brown Metal Grey

LH091.003.010

4000K

Silver Lead

LH091.003.011

4000K

Zirconio

LH091.003.012

4000K

Black

USB micro cable included.

battery status indicator

141.5

touch sensor

POWER SUPPLY

FURNITAL

ITEM

SPECIFICATIONS

TYPE

BOX

LH091.003.900

1A 100-240V

EU version

LH091.003.901

1A 100-240V

US version

205

ELECTRICAL PRODUCTS | LAMPS

BIG LAMP WITH BATTERY AND MOTION SENSOR

ITEM

COLOR TEMPERATURE

FINISHINGS

BOX

LH091.004.003

3000K

White

LH091.004.004

3000K

Brown Ral 8019

LH091.004.001

4000K

White

LH091.004.002

4000K

Brown Ral 8019

battery status indicator

motion sensor

201

BIG LAMP WITH BATTERY AND TOUCH SENSOR

ITEM

COLOR TEMPERATURE

FINISHINGS

BOX

LH091.004.007

3000K

White

LH091.004.008

3000K

Brown Ral 8019

LH091.004.005

4000K

White

LH091.004.006

4000K

Brown Ral 8019

battery status indicator

touch sensor

201

206

FURNITAL

ELECTRICAL PRODUCTS | LAMPS

BATTERY FOR BIG LAMP

ITEM

SPECIFICATIONS

BOX

LH091.004.009

3000 MAH

LH091.004.010

6000 MAH

ITEM

LENGTH (mm)

TYPE

BOX

LH091.005.001

500

USB-MICRO

ITEM

SPECIFICATIONS

TYPE

BOX

LH091.003.900

1A 100-240V

EU version

LH091.003.901

1A 100-240V

US version

USB CABLE

POWER SUPPLY

FURNITAL

207

208

FURNITAL

Furnital reserves the rights at all time to apply modifications for the functional or qualitative improvement of its products, materials, designs, sizes and functionality without prior notice. Texts and drawings presented in this catalogue are solely for communication purposes: for every technical and dimensional aspect, please refer to the company’s technical specifications and updates.

FURNITAL

209

Head office:

furnital srl

via Aldo Moro 3 22060 Carugo (Co) - Italy Tel. +39 031 605386 info@furnital.it www.furnital.it

FITTINGS SELECTION 5.1

We reserve the rights at all time to apply modifications of ranges, materials, designs, sizes and fuctionality without prior notice