Salice M50 Flex Coplanar

M50 Flex is a two-door coplanar cushioned sliding system with customisable track length, ideal for wardrobes and storage cabinets in homes, offices and shops.

• Made in Italy • Very easy to assemble and adjust with customisable track length • Super-smooth cushioned opening and closing with magnetic damping technology • High reliability, tested to 100,000 cycles. • Kit contains 1 x carriage kit, and 1 x profile kit (for double door installation)

Door dimensions: • Max weight for each door 50 kg (evenly distributed). • Width: min 800 mm - max 1600 mm. • Height: max 2700 mm. • Thickness: min 18 mm - max with handle 40 mm.

Part No. SAL.CPM50F.1930 SAL.CPM50F.2330 SAL.CPM50F.2730 SAL.CPM50F.3200 Internal Cabinet Size 1531 - 1930mm 1931 - 2330mm 2331 - 2730mm 2731 - 3200mm

Coplanar two-door cushioned sliding system with customisable track length • - capacity 50 kg per door.

Door dimensions: • Maximum weight for each door 50 kg (evenly distributed). • Width: - minimum 800 mm; - maximum 1600 mm. • Height: - maximum 2700 mm. • Thickness: - minimum 18 mm; - maximum with handle 40 mm. • Height from the ground: - 33 mm.

Door adjustment: • Vertical ± 5 mm • Horizontal ± 3,5 mm • Front: - Upper ± 3 mm - Lower ± 3 mm

Space Required

Door Overlap

Slider M50 Flex is a flexible system that can be adapted to the internal width of the unit (LI) with a minimum of 1531 mm to a maximum of 3200 mm.

The handle should be placed close to the leading edge of the door, or at a maximum distance of one third of its width (TL).

The minimum permitted overlap (D) is 14 mm; maximum 25 mm.

LI

TL

D D

Depending on the internal width of the unit (LI), the mechanism is put together using a carriage kit and a profile kit which are supplied according to the part numbers in the table below.

Part Number LI (mm) 1531 ÷ 1930 1931 ÷ 2330 2331 ÷ 2730 2731 ÷ 3200

SAL.CPM50F.1930 • SAL.CPM50F.2330 •

SAL.CPM50F.2730 •

SAL.CPM50F.3200 •

LI