EvoLift
- Opening systems
EvoLift
- Opening systems
Flap door Assembly instructions
pg 4 pg 6
Part number composition and packing
pg 12
Flap door with push opening
pg 13
Assembly instructions
pg 14
Charts to select the strength of the system
pg 16
Folding door
pg 16
Assembly instructions
pg 18
Part number composition and packing Charts to select the strength of the system
pg 26
Parallel opening door
pg 28
for doors from 360 mm to 440 mm height and for doors from 440 mm to 600 mm height Assembly instructions
pg 30
Part number composition and packing Chart to select the strength of the system
pg 38
EvoLift
Opening Systems - Flap door
Opening systems - Flap door
4
Opening Systems - Flap door
EvoLift
5
EvoLift
Opening Systems - Flap door
Drilling pattern for wooden door Hinges for doors with soft-close and handles: SAL.C2P6A99 Hinges for doors with Push opening: C2R4A99 (unsprung hinges) for a softer opening D=Cabinet door overlay
D
K=4 ø35 11
Internal cabinet side 176.5
13
D
32
40.5
175
230
6
Opening Systems - Flap door
EvoLift
Fixing the system to the cabinet side. Drilling depth 12 mm - Hole diameter ø 5 mm
44
30
60 130
20
140
Fitting the door to the cabinet.
7
EvoLift
Opening Systems - Flap door
Withdraw the safety clip. Lower the door slightly until the safety clip can be easily withdrawn.
Adjustment of the system strength. Use a Torx bit T20.
+
8
Opening Systems - Flap door
EvoLift
Adjustment of the decelerating effect.
Adjustment of the opening angle of the door, by cam, from 80° to 92°.
9
EvoLift
Opening Systems - Flap door
Installing cover. Installing thethe cover.
View of the mounted system.
View of the mounted system.
10
13
Opening Systems - Flap door
EvoLift
Removal of the door.
Dimensions of the system.
11
EvoLift
Opening Systems - Flap door
Door-Set Packing - Soft Close
Soft Close
Cover
SAL.FRMFXXX_SN_ System strength: D = weak F = strong
SAL.SR_M78AQSNXXF Cabinet side: D = right S = left
Refer to page 17 for strength tables Carton 1 System (either left or right hand) 1 Mounting plate Assembly instructions and template for cabinet side drilling Left and right hand must be ordered separately
12
Cabinet side: D = right S = left Left and right hand must be ordered separately
Opening Systems - Flap door with push opening
EvoLift
Door-Set Packing - Push-to-open
Push Opening
Cover
SAL.FRMFXXP_SN9_ System strength: D = weak
SAL.SR_M78AQSNXXF Cabinet side: D = right S = left
Refer to page 17 for strength tables Carton
Cabinet side: D = right S = left Left and right hand must be ordered separately
1 System (either right hand or left hand) 1 Mounting plate Assembly instructions and template for cabinet side drilling Fixing screws included Left and right hand must be ordered separately
Push catches required for correct operation (see over page for details)
13
EvoLift
Opening Systems - Flap door with push opening
Magnetic push - recessed magnetic release device and retaining catches
SAL.DP39XXG
SAL.DPMSNG
The push self-opening system is recommended for doors up to a max 400mm in height SAL.DP39XXG
SAL.DP39XXG
SAL.DPMSNG
DPM SAL.DPMSNG
DPA SAL.DPASNG
Application of the standard magnetic catch.
ø10
Drill a hole ø 10 mm and min. 40 mm depth in the top, the side or the base panel of the cabinet. Insert the release device into the hole.
S
40 min 2.5
T
Inserted adjustable magnetic catch. The retaining catch is itself magnetic and together with the magnetism of the release device DPM considerably increase (30%) the holding strength of the door against the cabinet side, thus avoiding accidental openings.
ø 10 S
For the installation it is necessary to drill a hole ø15 mm and 11 mm depth in the door. Depth adjustment from -0.5 mm to +2.5 mm.
14
2.5
ø 16.6
9.5 ø 15
40 min
ø 16.6
ø 15
T
Opening Systems - Flap door with push opening
EvoLift
Charts to select the exact system suitable for the dimensions and weight of the door. It is suggested that some assembly trials are made. NOTE: Push to open available in weak version only
Doors using a single stay (either right hand or left hand) Door w eight ( Kg) 0.50 0. 5 0.50 0. 5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 5
RD - W eak RF - S trong Door height 300 m m
0. 5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0.50 0.50
RD - W eak RF - S trong Door height 400 m m
0.50 0. 5 0.50 0. 5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 5
RD - W eak RF - S trong Door height 500 m m
0. 5 0.50 0.50 0.50 0. 5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 5
RD - W eak RF - S trong Door height 600 m m
Doors using 2 stays Door w eight ( Kg) 0. 5 0.50 0. 5 0.50 0. 50 0.50 .5 0. 50 0.50 .5 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 5 0.50 0.50 0.50 0.50
RD - W eak RF - S trong Door height 500 m m
0.50 0.50 0.50 0. 5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0. 50 0.50 .5 0.50 0. 50 0.50 .5 0. 50 0.50 .5
RD - W eak RF - S trong Door height 600 m m
15
EvoLift
Opening Systems - Folding door
EvoLift - Opening systems - Folding door EvoLift - Opening systems
Folding door
16
Opening Systems - Folding door
EvoLift
17
29 29
EvoLift
Opening Systems - Folding door
Drilling pattern for the upper wooden door.
K=4 ø35 11
11 ø35 K=3-5
18
Opening Systems - Folding door
EvoLift
Drilling pattern for the lower wooden door.
K=3-5
11
B
13 D
32
D = sideways overlay To determine the B value, use the table at page 22
Upper door
1 2
Lower door
1 - sideways adjustment ± 1.5mm 2 - height adjustment ± 1.5mm
19
EvoLift
Opening Systems - Folding door
140 44 20
D
131 161 231
HT
A
LHT
Arm Length
LHT Cabinet Height
Formula to determine the B value
600
570 - 630
475 + D - HT - A
660
631 - 690
505 + D - HT - A
720
691 - 750
535 + D - HT - A
780
751 - 810
565 + D - HT - A
910
881 - 940
634 + D - HT - A
20
Opening Systems - Folding door
EvoLift
Fixing the system to the cabinet side.
140
131
44
100
30
20
Fitting the door to the cabinet.
21
EvoLift
Opening Systems - Folding door
Withdraw the safety clip. Lower the door slightly until the safety clip can be easily withdrawn.
Adjustment of the system strength. Use a Torx bit T20.
+
22
Opening Systems - Folding door
EvoLift
Adjustment of the decelerating effect.
Installing the cover.
23
EvoLift - Opening systems - Folding door EvoLift Opening Systems - Folding door Assembly instructions
View of the mounted system.
View of the mounted system.
Removal of the door.
Removal of the door.
36
24
Opening Systems - Folding door
EvoLift
Dimension of the arm In the closed position.
12 mm
Dimensions of the system.
175
204 mm (600 mm) 217 mm (720 mm) 251 mm (910 mm)
102
241
157 mm (600 mm) 182 mm (720 mm) 207 mm (910 mm)
40,5
25
EvoLift
Opening Systems - Folding door
Door-Set Packing
Push Opening
Cover SAL.FLMF__X_SN_P
Arm length: 60 cm 66 cm 72 cm 78 cm 91 cm
Cabinet side: D = right S = left System strength: D = weak F = strong
Cabinet side: D = right S = left
Refer to page 29 for strength tables 1 Set Contains 1 System (either left or right hand) 1 Mounting plate 2 Central hinges Assembly instructions and template for cabinet side drilling Left and right hand must be ordered separately
26
SAL.SB_M78AQSNXXF
Left and right hand must be ordered separately
Opening Systems - Folding door
EvoLift
Charts to select the exact system suitable for the dimensions and weight of the door. The indicated weight capacities refer to a pair of arms. For doors of small weight and dimensions, it is possible to use one system only, right or left version. It is suggested that some assembly trials are made.
Weight of the two doors (Kg) 0.50 0.5
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.5
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.5
0.50
0.50
0.50
0.50
0.50
LD - Weak LF - Strong Total height of the two doors from 570 mm to 630 mm
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
LD - Weak LF - Strong Total height of the two doors from 631 mm to 690 mm
0.50 0.5
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
LD - Weak LF - Strong Total height of the two doors from 691 mm to 750 mm
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
LD - Weak LF - Strong Total height of the two doors from 751 mm to 810 mm
0.50
0.5
0.50
0.50 0.50 .5
0.50
0.50
0.50
.5
0.50 0.5
0.50
0.50
0.50
.5
0.50 0.50
0.50
.5
0.50
0.50
0.50
.5
0.50
.5
0.50
.5
0.5
RD - Weak RF - Strong Total height of the two doors from 880 mm to 940 mm
27
EvoLift
Opening Systems - Parallel opening door
EvoLift - Opening systems Parallel Opening door For doors from 360 mm to 440 mm height and for doors from 440 mm to 600 mm height
28
Opening Systems - Parallel opening door
EvoLift
29
EvoLift
Opening Systems - Parallel opening door
Drilling pattern for wooden door.
D
For doors from 360 mm to 440 mm height. D= Sideways and upper overlay
Internal cabinet side
262 to be secured after adjustment is complete
32
18.5
D
Drilling pattern for wooden door. For doors from 440 mm to 600 mm height. D= Sideways and upper overlay
D Internal cabinet side
342
32
18.5
30
D
to be secured after adjustment is complete
Opening Systems - Parallel opening door
EvoLift
Fixing the system to the cabinet side.
140 44
30
60 130
20
Fitting the door to the cabinet.
31
EvoLift
Opening Systems - Parallel opening door
Withdraw the safety clip. Lower the door slightly until the safety clip can be easily withdrawn.
Fitting the stabiliser bar.
32
Opening Systems - Parallel opening door
EvoLift
Adjustment of the system strength. Use a Torx bit T20.
+
Adjustment of the decelerating effect.
33
EvoLift
Opening Systems - Parallel opening door
Adjustments of the door.
Depth adjustment
Sideways adjustment
Height adjustment
Additional fixing to be secured after adjustment is complete. For alu-framed door, replace the indicated screw with the one in the package with the adapter DBZXBH9.
34
Opening Systems - Parallel opening door
EvoLift
After adjustments are complete, detach the stabiliser bar to install the cover. Then re-attach the stabiliser bar.
Bar dimension = Internal width of the cabinet - 126 mm
View of the mounted system.
35
EvoLift
Opening Systems - Parallel opening door
Removal of the door.
Kinematic motion of the system. T
AC
X max
SP
360-440mm SP X max 16 29 18 31 19 31 20 32 22 33
36
440-600mm SP X max 16 25 18 27 19 28 20 28 22 29
360-440mm T AC min.
440-600mm T AC min.
19 22 25
19 22 25
3 3,5 4
2 2,5 3
Opening Systems - Parallel opening door
EvoLift
Dimensions of the system for doors from 360 mm to 440 mm height. 175
151 320 min
147
45 19 41.5 360
35
Dimensions of the system for doors from 440 mm to 600 mm height. 175
151
400 min
45
41.5
120
35
200
600
37
EvoLift
Opening Systems - Parallel opening door
Soft Close
Cover SAL.SPXM78AQSNXXF
SAL.FPMF_XX_SN9 Arm length: C = short (for doors from 360 mm to 440 mm height) L = long (for doors from 440 mm to 600 mm height)
1 Set Contains
System strength: D = weak F = strong
1 Set Contains 1 Cover - right side 1 Cover - left side
1 System - right side 1 System - left side 2 Mounting plates Assembly instructions and template for cabinet side drilling Fixing screws included
Components to be ordered separately - needed to attach to door
Stabiliser bar SAL.FPMF59Q1039 - Suits cabinets up to 1200mm wide Cut to length (refer to page 37)
38
Opening Systems - Parallel opening door
EvoLift
Chart to select the exact system suitable for the dimensions and weight of the door. It is suggested that some assembly trials are made.
Door weight (Kg) 0.50 0.5
0.50 0.5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.50
0.50 .5
0.50 0.5
PD - Weak PF - Strong Door height from 360 mm to 600 mm
39