Adhesives, Sealants & Abrasives 2019
734
Q
Adhesives, Sealants & Abrasives Glue Bottles & Tap
TEC 7 Adhesives
PVA Adhesives
Silicone
PVA & Melamine Adhesives
Fillers & Repair Products
Instant Adhesives
Surface Protection
Hot Melt Adhesives
Abrasive Sheets & Rolls
TensorGrip
Abrasive Discs
Contact Adhesive
Abrasive Belts
Polyurethane & Construction Adhesives
Abrasive Pads & Blocks
Page 736
Page 737
Page 739
NEW
Page 740
Page 741
NEW
Page 742
Page 746
Page 747
Page 748
Page 750
Page 752
Page 757
Page 758
Page 759
Page 760
Page 761
735
Adhesives, Sealants & Abrasives Glue Bottles & Tap
Adhesives Glossary Aliphatic Glue
Crosslink PVA
Sandability
A modified form of PVA Adhesive.
A version of PVA that chemically reacts (crosslinks) to give a superior bond to traditional PVA, with better heat and water resistance, as well as higher bond strength.
How the adhesive performs when sanded after curing. An adhesive with low sandability will tend to clog sandpaper, and not give a smooth finish.
Clamp Time
Solids
The maximum time between when the glue is applied and when it is put under pressure.
Relates to the % of material other than water solvents. The higher the solids, the better the bond.
Open Time
Viscosity
The time between applying the adhesive and putting the surfaces together.
The thickness of the adhesive. The higher the number, the thicker the product.
Resin
Wet Tack
The main part of a 2 pack adhesive. Will not normally cure without the addition of a catalyst or hardener.
The tack, or adhesion, developed as the glue starts to cure.
Appearance What the adhesive physically looks like before drying.
Catalyst A hardener for 2 pack adhesives. A reagent that accelerates a chemical reaction, with or without heat. In the the case of 2 pack adhesives, it accelerates setting or hardening.
Creep Resistance Creep is the term usually given to the movement of timber at the glueline, due to expansion and contraction, caused by heat and moisture change. Adhesives with low creep resistance may even exude from the glueline due to these pressures.
Material Safety Data Sheets are available for all adhesives.
Part No.
Description
GBP.500
500ml Bottle and top
GBP.1000
1000ml Bottle and top
BT01.WH
Top only to suit GBP.500 & GBP.1000
Glue Drum Tap •• Tap for 20L drum Part No. TAP01
736
Furnware Group • Talk to the experts on 1300 222 600
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
Glue Bottles & Top
Q
Adhesives, Sealants & Abrasives PVA Adhesives
Star Bond PVA - General Purpose •• General woodwork adhesive •• White milky liquid appearance •• 45% Solids •• Medium (5500cps) viscosity •• Water clean up •• Open time: 8 - 10 minutes •• Clamp time: 20 minutes •• Dries clear •• 12 Months shelf life •• Good sandability Part No.
Description
FBA20.20
20L
FBA20.4
4L
Star Bond PVA - Premium Adhesive •• General joining application •• Good wet tack •• Medium drying speed •• White milky liquid appearance •• 50% Solids •• Medium (7000cps) viscosity •• Water clean up •• Open time: 5 - 10 minutes •• Clamp time: 30 - 45 minutes •• Dries clear •• 12 Months shelf life •• Good sandability Part No.
Description
FBA44.20
20L
FBA44.4
4L
Star Bond PVA - Sandable •• High wet tack •• Highly sandable •• White syrupy liquid appearance •• 50% Solids •• Medium (7000cps) viscosity •• Water clean up •• Open time: 5 - 10 minutes •• Clamp time: 30 - 45 minutes •• Dries clear •• 12 Months shelf life •• Very high sandability Part No.
Description
FBA47.20
20L
FBA47.4
4L
Ordering online is now even easier! www.furnwaregroup.com.au
737
Adhesives, Sealants & Abrasives PVA Adhesives
Star Bond PVA - Aliphatic •• Aliphatic (yellow) for MDF & hardwood •• Fast drying speed •• Light yellow liquid appearance •• 52% Solids •• Medium (5000cps) viscosity •• Water Clean up •• Open time: max 3 minutes •• Clamp time: min 20 minutes •• Dries light yellow •• 12 Months shelf life •• Good sandability Part No.
Description
FBA49.20
20L
FBA49.4
4L
•• High bond strength •• Fast set •• Water resistant •• White milky liquid appearance •• 50% Solids •• Medium (4500cps) viscosity •• Water clean up •• Open time: max 5 minutes •• Clamp time: minimum 20 mins •• Dries clear •• 12 Months shelf life •• Very high sandability
738
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Description
FBA3050.20
20L
FBA3050.4
4L
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
Star Bond PVA - Cross Linking Medium Viscosity
Q
Adhesives, Sealants & Abrasives PVA & Melamine Adhesives
Star Bond PVA - Cross Linking - High Viscosity •• High bond strength •• Fast set •• Water resistant •• Off white milky liquid appearance •• 52% Solids •• Very High (15000cps)Viscosity •• Water Clean Up •• Open Time: Approximately 10 Mins •• Clamp Time: Minimum 3 Hours •• Dries Clear •• 12 Months Shelf Life •• Very High Sandability •• 500ml is available in carton of 6 bottles only Part No.
Description
FBA1050.20
20L
FBA1050.4
4L
FBA1050.05
6 x 500ml
Star Bond Melamine Adhesive •• Acrylic adhesive for bonding melamine & laminated boards to timber & end grain particleboard •• White milky liquid appearance •• 56% Solids •• Medium (5000cps) viscosity •• Water clean up •• Open time: 3 mins •• Clamp time: minimum 45 minutes •• Dries clear •• 12 Months shelf life •• 500ml is available in carton of 6 bottles only Part No.
Description
FBA58.20
20L
FBA58.4
4L
FBA58.05
6 x 500ml
Hassle free ordering! Email us on info@furnwaregroup.com.au
739
Adhesives, Sealants & Abrasives Instant Adhesives
Mitre Fast Bonding Kit •• Mitre Fast Bonding Kit is a two part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where it’s instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc. •• 1 x 50gm Adhesive + 1 x 200ml Activator per kit Part No. MFK.250
NEW
Techniglue CA
Mix Ratio - By Volume - Resin 2:1 Hardener Resin
Hardener
Appearance
White 1 Thixotropic Gel
Amber Gel
Specific Gravity @ 25°C
1.09
0.96
Viscosity @ 25°C
480,000cps
335,OOOcps
Clean Up
Warm Water
Warm Water
Pot Life
30 Minutes
-
Full Strength
24 Hours
-
Dries
Hazy
-
Shelf Life
2 Years
-
Sandability
Excellent
-
NEW 740
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Description
ER60S.600
6L Slow Hardener Kit
ER60R.075
750ml Fast Hardener Kit
ER60R.150
1.5L Fast Hardener Kit
ER60R.600
6L Fast Hardener Kit
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
•• 2 Part epoxy glue 2:1 ratio •• Bonds a wide range of substances, including difficult hardwoods, metals & ceramics
Q
Adhesives, Sealants & Abrasives Hot Melt Adhesives
Rakoll Hot Melt Glue - Granules •• Synthetic hot melt adhesive for edge banding on automatic machines •• Excellent heat resistance up to 65°c •• 15kg Box •• Colour: Natural (NAT), White (WH) Part No.
Colour
RAK4.570
NAT
RAK4.570
WH
Rakoll Hot Melt Glue - Slugs •• Synthetic hot melt adhesive for edge banding on automatic machines •• Excellent heat resistance up to 65°c •• 15kg Box •• Colour: Natural (NAT) Part No.
Colour
RAK650.P2
NAT
Jowat Hot Melt Glue - Granules •• Semi-filled hotmelt with high softening range for melamine, rigid edging and multi layered veneer •• Manufactured in Germany •• Jowat Product Code: 288.60 •• 25kg bag •• Colour: Natural (NAT) Part No.
Colour
JOW688
NAT
Jowat Hot Melt Glue - Slugs •• Semi-filled hotmelt with high softening range for melamine, rigid edging and multi layered veneer •• Manufactured in Germany •• Jowat Product Code: 286.60 •• 48 cartridges - 15.5kg •• Colour: Natural (NAT) Part No.
Colour
JOW286
NAT
Join us on social media! @FurnwareGroup
741
Adhesives, Sealants & Abrasives TensorGrip
TensorGrip L10 - Contact Adhesive •• TensorGrip L10 is a high performance laminate grade contact adhesive •• Fine spray •• Low odour •• High coverage (up to 210m2) •• Fast drying •• High heat resistance •• Portable system •• Fast & easy application •• Colour: Clear (CL) Part No.
Colour
Description
TGL10
CL
22L Canister
Standard Laminate
Web Spray
TensorGrip L17 - Contact Adhesive
Part No.
Colour
Description
TGL17
CL
22L Canister
Metal/Aluminum Sheeting
Standard Laminate
Web Spray
TensorGrip L17N - Contact Adhesive - Non-Flammable •• TensorGrip L17N is a completely non-flammable version of L17. TensorGrip L17N is the preferred and recommended option for bonding laminate on site or in occupied areas. •• Non-flammable adhesive and propellant •• High Temperature resistance (115°c) •• High coverage (up to 230m2) •• Postform grade •• Low odour •• Portable system Metal/Aluminum NonSheeting Flammable •• Colour: Clear (CL)
742
Part No.
Colour
Description
TGL17NF
CL
22L Canister
Furnware Group • Talk to the experts on 1300 222 600
Standard Laminate
Web Spray
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
•• TensorGrip L17 is a high strength laminate adhesive developed for bonding decorative surfaces to most common core substrates. •• High temperature resistance (115°c) •• High coverage (up to 230m2) •• Postform grade •• Low odour •• Portable system •• Fast & easy application •• Colour: Clear (CL)
Q
Adhesives, Sealants & Abrasives TensorGrip
TensorGrip L32 - High Strength Contact Adhesive •• THE HIGH STRENGTH WEB SPRAY CONTACT ADHESIVE •• TensorGrip L32 is a very high strength contact adhesive, perfect for bonding melamine to melamine without the need for scuffing •• Ideal for bonding PVC and ABS edging •• Recommended for bonding metal and aluminium sheeting as well as many plastics •• High temperature resistance (126°c) •• High Solids •• Portable system •• Fast & easy application Metal/Aluminum Sheeting •• Colour: Clear (CL) Part No.
Colour
Description
TGL32
CL
22L Canister
Web Spray
Edging
Melamine Build-ups
TensorGrip L12 - High Tack Contact Adhesive •• THE ULTIMATE HIGH TACK WEB SPRAY CONTACT ADHESIVE •• TensorGrip L12 is a very high tack contact adhesive, perfect for bonding Flexi-ply into curved shapes & structures •• Ideal for bonding flexi-ply due to its high tack & incredible grab properties which reduces the need for mechanical fixings when building curved structures •• Also great for doing wood build-ups to create thicker worktops etc. •• Fast Drying •• High Solids •• Portable system •• Fast & easy application Flexi-ply •• Colour: Clear (CL) Part No.
Colour
Description
TGL12
CL
22L Canister
Wood Build-ups
Web Spray
TensorGrip L31 - Fine Pebble Spray Contact Adhesive •• THE HIGH GLOSS LAMINATE AND POST FORMING MASTER •• TensorGrip L31 is Fine Pebble mist spray contact adhesive for use with high gloss laminates •• Ideal for use with high gloss laminates due to its fine pebble mist spray pattern which results in the perfect finish. •• Also a great post forming adhesive because of its very high temperature resistance (160°c) •• Fast Drying •• High Solids •• Portable System •• Fast & easy application High Gloss Laminate •• Colour: Clear (CL) Part No.
Colour
Description
TGL31
CL
22L Canister
Post-Forming
Pebble Spray
Ordering online is now even easier! www.furnwaregroup.com.au
743
Adhesives, Sealants & Abrasives TensorGrip
TensorGrip Professional Spray Gun •• The Professional Spray Gun is the ultimate spray gun with a 30 year proven track record. The Gun is a full aluminium body, with full finger trigger movement giving far less potential of RSI. The spray gun will fit all types of canister hoses and gives a perfect spray pattern when used with the Tensor range of products Part No. TGPSG
TensorGrip 3.5m Spray Gun Hose •• Made from high quality rayon reinforced Goodyear hose with a Nylon 7 core, giving ultimate flexibility and user convenience •• Fully swaged couplings and a rubber bend restrictor on each end to prevent damage •• Hose length: 3.5 meters Part No.
TensorGrip 190mm Laminating Roller •• The Tensor heavy duty Laminating rollers have a unique cranked J-handle design which has been proven to increase the pressure applied Part No. TGLR.190
744
Furnware Group • Talk to the experts on 1300 222 600
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
TGH3.5
Q
Adhesives, Sealants & Abrasives TensorGrip
L17 TensorGrip - Contact Adhesive - Aerosol •• TensorGrip L17 is a high strength laminate adhesive developed for bonding decorative surfaces to most common core substrates. L17 is also suitable for low energy surfaces e.g . Stainless steel, Melamine and many plastics •• Industrial strength/Postform grade •• High coverage (up to 7m² per aerosol) •• Low odour •• High temperature resistance (115°c) •• Fast Application •• Box Qty: 12 Part No.
Colour
Description
TGL17AS
CL
500ml Aerosol Can
L32 TensorGrip - Contact Adhesive - Aerosol •• TensorGrip L32 is a very high strength contact adhesive, perfect for bonding melamine to melamine without the need for scuffing •• Handy aerosol can, great for onsite •• Ideal for bonding PVC and ABS edging •• Low odour •• High temperature resistance (126°c) •• Fast Application Part No.
Colour
Description
TGL32AS
CL
500ml Aerosol Can
TensorGrip C101 Citrus Cleaner - Aerosol •• Industrial strength to remove wet or dry adhesive •• Safe to use on many surfaces •• Non-corrosive, leaves no residue •• Effective for clean up, degreasing, overspray •• Removes grease, oil, ink, stickers and tar •• Strong citrus oils which clean and have a pleasant aroma •• 397 grams •• Box Qty: 12 Part No.
Description
ACRCC
500ml Aerosol Can
Hassle free ordering! Email us on info@furnwaregroup.com.au
745
Adhesives, Sealants & Abrasives Contact Adhesive
Star Bond Contact Adhesive •• Sprayable •• Freight surcharges may apply •• MSDS available on request •• 17-19% Solids •• 280-420 cps at point of application viscosity •• Greater than 100°C heat resistance •• 30 Seconds to 10 minutes drying time •• 6-8 Square metres per litre coverage •• 2 Year shelf life •• Colour: Clear (CL), Red (RD) Part No.
Size
Colour
C2000.4
4L
CL
CA.2000C
20L
CL
CA.2000R
20L
RD
Star Bond Adhesive Thinners
Part No
Description
THCA.4
4 Litre
THCA.20
20 Litres
Star Bond ABS Cleaner •• Freight surcharges may apply
746
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Description
ABS.4
4 Litre
ABS.20
20 Litre
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
•• Special solvent blend for cleaning or thinning neoprene contact adhesives (up to 5% add rate) •• Freight surcharges may apply
Q
Adhesives, Sealants & Abrasives Polyurethane & Construction Adhesives
AVS Polyurethane Adhesive - Cartridge •• High strength moisture cured •• 100% waterproof (D4 Classification) •• Good gap filling properties •• High creep resistance •• Bonds to most surfaces •• Translucent Gel •• Clean Up: MechanicaI means after cure •• Open Time: 10 Mins •• Clamp Time: Minimum 1 Hour •• Dries: Cream/Yellow •• Shelf Life: 12 Months •• Sandability: Good •• Box Qty: 12 Part No. AV515
Fuller Construction Adhesive •• Fuller Trade construction adhesive is ideal for bonding timber and most common construction materials including particle board, MDF board, brick, concrete, gypsum board, galvanized metal and aluminium. Fuller Trade construction adhesive is a synthetic rubber based adhesive designed primarily for installation of flooring and wall panels. •• Paintable with most surface coatings •• Reduces squeaking associated with nail ride in floors •• Complies with AS 2329 – 1999 requirements •• Repositionable for up to 20 minutes after application. Reduces number of mechanical fasteners required to install floors or walls •• Water resistant - will not break down in intermittent contact with water (e.g. rain) •• Natural wood colour - blends in •• High bond strength •• Box Qty: 20 •• Colour: Beige (BE) Part No.
Colour
CAF300
BE
Fuller ToolboxTM Hybrid Adhesive Sealant •• ToolboxTM is a hybrid moisture curing adhesive and sealant with high green strength for use in a wide variety of critical adhesive and sealing applications. ToolboxTM cures to form a tough, water resistant seal and will adhere to a wide range of substrates. Its versatility means it can replace most water based and solvent based construction adhesives, polyurethane adhesive and sealants as well as silicones in construction, marine, transport and industrial assembly applications •• Primerless adhesion to wide range of surfaces •• Paintable with most water based paints •• Interior & exterior - High UV resistance •• Safe on mirrors, except PE backed mirrors •• Box Qty: 12 •• Colour: Grey (GY) Part No.
Colour
STBF400
GY
Join us on social media! @FurnwareGroup
747
Adhesives, Sealants & Abrasives TEC 7 Adhesives
X-Tack Instant Grab Adhesive •• The fastest assembly adhesive among the MS polymers. Perfect for the adhesion of splashbacks, mirrors & under bench sinks. It takes away the need for fixings, double sided tape or props •• Super strong structural bonding. Sheer strength of 600kg/m2 while wet & 260tonne/m2 after cure •• Adheres to both wet and dry substrates •• Permanently elastic - vibration and impact resistant •• Must be used with a professional TEC7 gun •• Odourless and solvent-free, can be used in enclosed spaces •• Paintable with most common lacquers •• 290ml cartridge •• Box Qty: 12 •• Finish: White (WH) Part No.
Finish
XTACK7
WH
Tec7 Solvent Free MS Polymer Adhesive
Part No.
Finish
TEC7
BL, GY, WH
Trans Clear/Inox Solvent Free MS Polymer •• Transparent sealing adhesive offering excellent adhesion and sealing applications. Ideal for adhesion to tiles, ceramic, porcelain, aluminium, wood, concrete, glazed surfaces, without use of a primer •• Ideal on natural stone – does not bleed through •• Adheres to both wet and dry substrates •• Fungus and bacteria resistant •• Odourless and solvent-free, can be used in enclosed spaces •• Paintable with most common lacquers •• Inox appearance matches stainless steel •• 310ml cartridge •• Box Qty: 12 •• Finish: Clear (CL), Inox (IN)
748
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Finish
TRANS7
CL, IN
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
•• Sealing, adhesive bonding, assembling, with one product. Ideal for flat applications such as the adhesion of benchtops & wall panels •• Sheer strength of 320 tonnes/m2 once cured •• Adheres to both wet and dry substrates •• Permanently elastic - vibration and impact resistant •• High UV and fungus resistance •• Odourless and solvent-free, can be used in enclosed spaces •• Fast shrink-free curing •• 310ml cartridge •• Box Qty: 12 •• Finish: Black (BL), Grey (GY), White (WH)
Q
Adhesives, Sealants & Abrasives TEC 7 Adhesives
Tec7 Cleaner •• Ideal surface preparation for TEC7 products •• Great adhesive remover, perfect for removing adhesive from panels after edge banding •• Ideal for finishing TEC7 joints, and is also a good degreaser •• Removes uncured X-TACK7, TEC7 AND TRANS7 •• Does not attack most surfaces •• Does not leave a greasy film •• 500ml aerosol •• Box Qty: 12 Part No. TEC7CLN
HP Clean Professional Solvent Free Biodegradable Cleaner •• HP Clean is a powerful and deep acting all round general purpose cleaner •• Ideal for finishing off caulking joints •• Safely removes unpleasant odours and natural soiling •• Non-flammable •• 100% biodegradable •• Pleasant odour •• Acid free and safe for use on all materials •• Non-corrosive •• 1 Litre Spray bottle Part No. HP7CLN
Professional Tec7 Caulking Gun •• Professional sealant gun recommended for all Tec7 adhesives especially used for the X-TACK •• 1:18 compression ratio •• Suits all standard cartridges Part No. TEC7GUN
Ordering online is now even easier! www.furnwaregroup.com.au
749
Adhesives, Sealants & Abrasives Silicone
Bostik Kitchen & Bathroom Neutral Cure Silicone •• Bostik Kitchen & Bathroom Silicone is a neutral (Oxime) curing sealant. It is specially formulated to resist mildew when exposed to prolonged hot and humid environments. •• Neutral cure – Will not corrode concrete or zinc coated/galvanised steel •• Permanently flexible; ± 25% joint movement •• Resistance to weathering and UV radiation •• Box Qty: 20 •• Colour: White (WH), Translucent (TR) Part No.
Colour
SNW300
WH
SNT300
TR
•• Bostik Kitchen & Bathroom Silicone is an acetic (acetoxy) curing sealant. It is specially formulated to resist mildew when exposed to prolonged hot and humid environments. •• Permanently flexible; ± 25% joint movement •• Do not use in direct contact with silver coating of mirrors, (e.g. edge of mirror) •• Resistant to mould and mildew growth •• Box Qty: 20 •• Colour: White (WH), Translucent (TR)
750
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Colour
SAW300
WH
SAT300
TR
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
Bostik Kitchen & Bathroom Acetic Cure Silicone
Q
Adhesives, Sealants & Abrasives Silicone
Bostik V60 High Performance Glazing Weatherproofing Silicone •• Its superior adhesion to painted and anodised aluminium & glass has made this silicone the market leader in the glass market for the last 15 years •• The thixotropic nature of this product ensures that it will not slump in typical construction joints •• Meets the requirements of Australian Standard AS 4020-1994 •• Excellent UV Stability •• Ideal for use in structural glazing and weatherproofing •• Box Qty: 15 •• Colour: Translucent (TR) Part No.
Colour
BSV60
TR
Fuller Mirror & Metal Silicone Sealant •• 790 Mirror and Metal Silicone sealant is a neutral cure sealant specially formulated for a wide range of uses. It is ideal for glazing, weather sealing, metal assembly, mirror bonding and many other professional trade applications •• Permanently flexible •• Water resistant •• UV and weather resistant •• Resistant to temperature extremes: - 50°C to 150°C •• 25% dynamic movement capability •• Non-acidic, will not corrode metal •• Suitable for bonding silver backed mirrors •• Not suitable for installing vinyl or safety backed mirrors •• Box Qty: 20 •• Colour: Translucent (TR) Part No.
Colour
SMMF300
TR
Hassle free ordering! Email us on info@furnwaregroup.com.au
751
Adhesives, Sealants & Abrasives Fillers & Repair Products
Bostik Gap Filler
Part No.
Colour
GS450
WH
Spare Silicone Nozzles •• Pack of 6 only Part No. SN02
752
Furnware Group • Talk to the experts on 1300 222 600
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
•• Bostik Gap Seal is a general purpose, water based, acrylic gap filler, suitable for use on interior and exterior areas prior to painting. It offers excellent adhesion properties suitable for sealing gaps and low movement joints. •• Excellent sealing and adhesion •• Slump resistant •• Skins within 15 minutes •• Can be over painted after 2 hours •• Water clean up •• Environmentally friendly •• Low VOC •• Box Qty: 20 •• Colour: White (WH)
Q
Adhesives, Sealants & Abrasives Fillers & Repair Products
Liquid Laminate •• For the repair of small chips and imperfections in melamine board and laminate •• Water based acrylic, thin and easily cleaned with water •• Colour darkens when dry, mix one shade lighter when mixing paints Part No.
Colour
LL15
White
LL15
Alabaster
LL15
Black
LL15
Classic Beige
LL15
Marl Beige
LL15
New Antique White
LL15
Oyster Grey
LL15
Parchment
LL15
Pewter
LL15
Silver Grey
LL15
Stipple Cocoa
LL15
Stipple Seal
Plastic Wood Filler •• 4kg Tin including hardener •• Please specify hardener colour - white or red •• Colour: White (WH), Red (RD) Part No.
Description
Colour
GPW4
4kg with hardener
WH, RD
HRD
Extra hardener
WH, RD
Join us on social media! @FurnwareGroup
753
Adhesives, Sealants & Abrasives Fillers & Repair Products
Timbermate
754
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Colour
Size
TM500
Pine
500gm
TM500
Cedar (Blackwood)
500gm
TM500
Mahogany (Meranti)
500gm
TM500
Jarrah
500gm
TM500
Maple
500gm
TM500
Oak
500gm
TM500
Teak (Cypress)
500gm
TM500
Natural (Tinting base)
500gm
TM500
Walnut
500gm
TM500
Rimu (Baltic Pine, Oregon)
500gm
TM500
Brushbox
500gm
TM500
Ebony
500gm
TM500
White
500gm
TM500
Hardwood (Ash, Tas Oak)
500gm
Part No.
Colour
Size
TM2
Pine
2kg
TM2
Cedar (Blackwood)
2kg
TM2
Walnut
2kg
TM2
White
2kg
TM2
Hardwood (Ash, Tas Oak)
2kg
Part No.
Colour
Size
TM20
Pine
20kg
TM20
Hardwood (Ash, Tas Oak)
20kg
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
•• Water based •• Available colours: Pine, Cedar (Blackwood), Mahogany (Meranti), Jarrah, Maple, Oak, Teak (Cypress), Natural (Tinting base), Walnut, Rimu (Baltic Pine, Oregon), Brushbox, Ebony, White, Hardwood (Ash, Tas Oak) •• Please specify colour
Q
Adhesives, Sealants & Abrasives Fillers & Repair Products
Andy Craft Furniture Repair Crayons •• Andy Craft were developed to aid in hiding blemishes in timber and laminates and it is a simple process to rub the crayon over the blemish, nail hole or edge of the laminate, and then polish off the excess with a soft cloth •• Covers most laminates & melamine’s as well as standard wood-grains •• Manufactured using a paraffin wax base •• Crayons will not dry out or crumble over time Part No.
Colour
ACFRC
White
ACFRC
Black
ACFRC
Arctic Mist
ACFRC
Antique White
ACFRC
Baltic Pine
ACFRC
Birch
ACFRC
California Pine
ACFRC
Cherry
ACFRC
Dark Walnut
ACFRC
Folkstone
ACFRC
Graceful Oak
ACFRC
Gunmetal
ACFRC
Ironstone
ACFRC
Jarrah
ACFRC
Light Teak
ACFRC
Marl Beige
ACFRC
Parchment
ACFRC
Red Cherry
ACFRC
Select Beech
ACFRC
Teak
ACFRC
Tasmanian Oak
ACFRC
Wild Birch
ACFRC
Walnut
ACFRC
Young Beech
ACFRC.FULLSET
Box containing one of each colour
White
Black
Arctic Mist
Antique White
Baltic Pine
Birch
California Pine
Cherry
Dark Walnut
Folkstone
Graceful Oak
Gunmetal
Ironstone
Jarrah
Light Teak
Marl Beige
Parchment
Red Cherry
Select Beech
Teak
Tasmanian Oak
Wild Birch
Walnut
Young Beech
Colours shown are as close as modern printing processes allow and may vary from colour of actual product.
Ordering online is now even easier! www.furnwaregroup.com.au
755
Adhesives, Sealants & Abrasives Filler & Repair Products
Novoryt Repair Kit •• Made in Switzerland •• Thermo-plastic filler system •• Kit contains 20 of the most common coloured wax blocks •• Kit includes: Accumelter, scraper and polishing cloth. •• Now with the new Accumlter •• Colours included in the kit are marked with an * on the chart below •• Wax can be mixed together to create different colours •• Can be used on most surfaces Part No.
Description
N110.624
20 piece kit
Novoryt Accumelter •• Made in Switzerland •• New Accumlter which melts wax safely without burning or scorching Part No. N150.040
Replacement/Additional Wax Blocks •• Please specify colour number & insert into Part No. Part No.
240 * Antique White
238 *
Light Coral
244 Sea Shell
208 *
Coral
210 *
Peach Blossom
206 *Chamois Beige
172
Light Beech
218 *
Teal
239 *
171
Natural Beech
219 *
White
Marl Beige
111
Light Oak
209
Almond Beige
164
Clear
222 *
Peach
153
Yellow
213 *
Rimu
123
Mid Cherry
107
Birch
152
Red
212 *
Jade Green
Azur Blue
203 *
Silver Grey
211 *Jade Dark Green
202 * Mistral Blue
205 *
Dove Grey
247
Flax
231 * Provence Blue
207 * Charcoal Grey
217 *
Jade
151 Navy Blue
220 *
216
Colours shown are as close as modern printing processes allow and may vary from colour of actual product. 214 *
756
Furnware Group • Talk to the experts on 1300 222 600
Dark Brown
122 American Walnut
Black
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
NCOL. _ _ _
Q
Adhesives, Sealants & Abrasives Surface Protection
Mask ‘N’ Peel •• Mask ‘N’ Peel IPF127 is a premium protection film with a high level of adhesion. It is used for the protection of melamine doors and panels during painting and other processes. May also be used as a general purpose protection film •• Thickness: 0.07mm •• Colour: Orange tint Part No.
Size
IPF127.85
850mm x 100 metre
IPF127.122
1200mm x 200 metre
Rout ‘N’ Peel •• Rout ‘N’ Peel IPF220 is a premium protection film with a high level of adhesion. Used extensively for the protection of melamine and laminates during routing and machining prior to painting. This unique film provides a clean edge during most machining operations. May also serve as a general purpose protection film •• Thickness: 0.08mm •• Colour: Blue tint Part No.
Size
IPF220.75
755mm x 100 metre
IPF220.122
1220mm x 100 metre
Protect ‘N’ Peel “Benchtop Saver” •• “Benchtop Saver” is a premium protective film which provides temporary surface protection for a wide variety of surfaces. “Benchtop Saver” is suitable for use on some painted finishes, laminates, stone, and fibreglass products, i.e. kitchen benchtops, spa baths etc. Applied to kitchen benchtops after installation “Benchtop Saver” provides protection from damage and the Black/White film gives visual evidence if damage does occur •• Thickness: 0.12mm •• Colour: Top - White, Adhesive side - Black Part No.
Size
IPF400
640mm x 100 metre
Hassle free ordering! Email us on info@furnwaregroup.com.au
757
Adhesives, Sealants & Abrasives Abrasives Sheets & Rolls
Abrasive Sheets •• Sheets 230 x 280mm •• Pack of 100 sheets •• Minimum 1 pack (pk/100) Part No.
Description
SSD230.280.80
80 grit
SSD230.280.120
120 grit
SSD230.280.240
240 grit
•• Paper backed •• Rolls 115mm x 25 metres •• Minimum 1 roll
758
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Description
SR115.25.80
80 grit
SR115.25.120
120 grit
SR115.25.180
180 grit
SR115.25.240
240 grit
SR115.25.320
320 grit
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
Abrasive Rolls - Paper Backed
Q
Adhesives, Sealants & Abrasives Abrasive Discs
Abrasive Film Discs - 150mm Ø 9 Holes •• Aluminium oxide grit •• Velcro type back •• 100 discs per pack •• Minimum 1 pack Part No.
Description
ABFD150.9H.120
120 grit
ABFD150.9H.180
180 grit
ABFD150.9H.240
240 grit
Abrasive Film Discs - 150mm Ø 7 Holes •• Aluminium oxide grit •• Velcro type back •• 100 discs per pack •• Minimum 1 pack Part No.
Description
ABFD150.7H.120
120 grit
ABFD150.7H.180
180 grit
ABFD150.7H.240
240 grit
Join us on social media! @FurnwareGroup
759
Adhesives, Sealants & Abrasives Abrasive Belts
Abrasive Belts 75mm x 610mm •• Aluminium oxide grit •• 75mm wide x 610mm long •• Pack of 10 only Part No.
Description
SB75.610.40
40 grit
SB75.610.60
60 grit
SB75.610.80
80 grit
SB75.610.120
120 grit
•• Aluminium oxide grit •• 100mm wide x 610mm long •• Pack of 10 only
760
Furnware Group • Talk to the experts on 1300 222 600
Part No.
Description
SB100.610.40
40 grit
SB100.610.60
60 grit
SB100.610.80
80 grit
SB100.610.100
100 grit
SB100.610.120
120 grit
SB100.610.180
180 grit
© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.
Abrasive Belts 100mm x 610mm
Q
Adhesives, Sealants & Abrasives Abrasive Pads & Blocks
Abrasive Pad •• Extra soft polyurethane foam with 2 sided aluminium oxide grit •• Perfect for intermediate sanding between paint coats •• Can also be used moist for special applications •• Size: 100mm x 125mm x 12.5mm Part No.
Description
AB2S.F
Fine
AB2S.M
Medium
Abrasive Block - Square Sides •• Standard block - general purpose •• Firm polyurethane foam •• 4-sided aluminium oxide grit •• Size: 68mm x 98mm x 25mm Part No.
Description
AB4S.MF
Medium Fine
AB4S.MC
Medium Coarse
Abrasive Block - Angled Sides •• Sanding block with angled sides •• Firm polyurethane foam •• 4-sided aluminium oxide grit •• Allows better and more professional results in places with limited access •• Size: 125mm x 75mm x 25mm, 15 Degree Part No.
Description
AB4RH.F
Fine
Ordering online is now even easier! www.furnwaregroup.com.au
761
Furnware Group Distribution Centre: 1-5 Jessica Place, Prestons NSW 2170 Postal: PO Box 250, Engadine NSW 2233
1300 222 600 www.furnwaregroup.com.au