instrotek速, inc. Product Catalog
InstroTek速 Inc. innovators in instrumentation technology
InstroTek®, Inc., was founded in 1997 with the vision to
our corporate offices are in raleigh, nc and currently we
provide the construction industry with innovative product
have three fully equipped sales and service centers in
solutions and unmatched customer service. since that
grand rapids, mi; las vegas, nv; and concord, ca. With
time, we have delivered several new products to the
four strategic offices throughout the u.s. and a large
construction, aluminum, pulp and paper, and homeland
network of international distributors, our customers are
security markets. in addition, we have received numerous
never far from our experienced and knowledgeable
u.s. and international patents on these instruments.
representatives.
these innovative solutions have established instrotek as the leading instrumentation company in the worldwide
in august 2008, instrotek, inc. acquired cPn international
construction and transportation industries.
to create our newest office located in the san Francisco Bay area. the cPn acquisition brings over 40 years of history
We were the first to develop a portable nuclear gauge
and experience in the construction testing instrumentation
calibration device, automatic asphalt sealing equipment for
business to our customers. cPn is one of the oldest, most
density measurements, and rapid asphalt drying system.
established, and largest nuclear gauge manufacturers in the industry with established products and an extensive
around the world, instrotek equipment is used for
distribution network throughout the world.
accuracy and reliability in materials testing. the in-depth knowledge of nuclear and non-nuclear instrumentation
We appreciate your support and friendship over the years
enables us to address some of the most complicated
and look forward to serving you for many more years and
measurement problems.
from many more locations within the u.s. and internationally.
ouR MIssIon
“Our mission is to lead our industry through innovative instrumentation, exemplary customer service and an infrastucture of proud dedicated employees.”
— Ali Regimand President, InstroTek®, Inc.
tAble of Contents about us
Page 1
mist
Page 2
corelok
Page 3
coreDry & Pumpsaver
Page 4
autoscan cte
Page 5
elite nuclear gauge
Page 6
instrotek/cPn nuclear gauges, & valiDator
Pages 7 - 8
iPc global Products - amPt & utm systems, utm testing Pages 9 -10 iPc global Products - testing instruments & accesories
Pages 11
services
Page 12
instrotek’s global reach
Page 13
hma moisture sensitivity testing Proper testing and screening of hma mixes for moisture susceptibility is a crucial requirement for designing high-performance and long lasting pavements. instrotek’s new moisture induced stress tester (m.i.s.t.™) is designed to simulate hma pavement stripping mechanisms—due to the presence of water and repeated traffic loading. current moisture sensitivity tests suffer from poor repeatability with test times lasting as long as five days. instrotek’s m.i.s.t.™ can condition one or two samples in 4 hours. the system consists of a pressurized chamber that pushes and pulls water through a compacted asphalt sample, simulating the action of an automobile tire on a wet surface— creating pore pressure and scouring within the asphalt layer.
• Temperature Accuracy:
±1°c / 1.8 °F
• Maximum Apparent Pressure:
517 kPa / 75 psi
• Electrical:
115 VAC 20A (optional 230 vac 10a)
• Weight:
159 kg / 350 lbs.
• Height:
1.35 m/53"
• Foot Print:
0.53m x 0.53m / 21" x 21" square
2
CORELOK
®
O n e M a c h i n e f o r ALL Y o u r G r a v i t y M e a s u r e m e n t s An innovative, non-nuclear method of determining bulk specific gravity of materials. The CoreLok® is a system for sealing asphalt samples so that sample densities may be measured by water displacement method. Samples are automatically sealed in specially designed puncture resistant polymer bags. Densities measured with the CoreLok system are highly reproducible and accurate. The results are not dependent on material type, sample shape, or technician judgment. The GravitySuite PC software package calculates and manages your data for ease of operation. Bulk Specific Gravity:
Aggrega te Apparent G ra vity
• The sample is sealed with specially designed polymer
and Absorption:
bags; eliminating all air from around the sample.
• The CoreLok performs this test in under 30
• The sample is then submerged into water to get an
minutes; an ideal test for quality control at
accurate volume or under water submersion weight.
asphalt and concrete plants.
• The CoreLok has proven to match the results of the
• Traditional test methods can take up to 2 days.
traditional test methods for asphalt cores under 7% air voids.
• The CoreLok process is simple and repeatable
• The Corelok is the most accurate test method for high air
with only a few steps.
void samples such as open graded mixtures OGFC, SMA and
• Process does not depend on operator
rubberized asphalt.
judgement that can vary results.
• ASTM D6752, AASHTO T331
• ASTM D7370
ma x Specific Gravity:
Effective Air Voids, Porosity:
• The CoreLok can perform the Max Specific Gravity in less than
• Great indicator of mix permeability
10 minutes, traditional test can take up to 30 minutes.
• Simple and effective test
• The CoreLok produces the same test results as traditional
• ASTM D7063
test methods. • ASTM D6857
3
C REDRY CO ®
raPiD asPhalt Drying system astm D7227 the coreDry® system from instrotek® has proven to be the fastest, most efficient method for drying compacted asphalt samples. the coreDry® keeps the sample at close to room temperature through the entire drying process. instrotek pioneered this critical technology specifically for the asphalt industry. • Complete self-contained system • Field samples dry in 10-15 minutes • Large LCD backlight display • Easy to operate • Service alerts and diagnostics features
™
eco-FrienDly vaccuum PumP moisture traP the Pumpsaver® from instrotek® replaces current ineffective and outdated desiccants and moisture filters. it uses eco-friendly electronic technology to capture and retain water vapor created when a vacuum is applied to a saturated sample. the Pumpsaver® is designed to improve your pump’s efficiency, extend the pump’s life, and save you money on required pump oil. • Reduce costs by reducing the number of vacuum oil changes per year. • Allows vacuum pump to run much more efficiently. • Eliminates the need for flow restricting desiccant cartridges. • Increases the life of your vacuum pump. • Can be used for ASTM D2041, AASHTO t-209 tests
4
AutoScan CTE
™
Improving the Quality of Concrete Design InstroTek’s innovative system, the AutoScan CTE, now provides engineers and technicians the capability to measure the coefficient of thermal expansion (CTE) of concrete cylinders and cores. This fully automatic device, with its small foot print, is designed for bench top operations. The temperature at hot and cold settings is accurately controlled with a high capacity integrated environmental system. The displacement and sample height measurements are performed with an LVDT that is placed outside the water tank, with positive contact over the surface of the sample. This innovative method of displacement measurement ensures that the LVDT measurement device is kept at room temperature and not exposed to extreme temperature changes during the testing routine, which could negatively affect its operation. AutoScan CTE is capable of testing 4 and 6 inch (100 and 150 mm) diameter samples. The results collected during each test, along with system control information, are displayed numerically and graphically on the computer screen. The same data is also stored in a file for further analysis into a MS Excel spreadsheet format. AutoScan CTE™ — the most practical and cost effective way of measuring concrete CTE.
5
• Overall Unit Dimensions
610 X 485 X635 mm (24 X 19 X 25 in) Length X Width X Height
• Sample dimensions
Diameter 90 to 160 mm (3.5 to 6.3 in), Length 170 to 210 mm (6.6 to 8.3 in)
• Number of samples per test
one
• Temperature
5° to 60° C, adjustable in 1° C increments
• Temperature sensitivity
±0.1° C
• Height Sensitivity
0.00125 mm (0.00005 in) over a range of 5 mm (0.2 in)
• Power
110 Volt (220 optional)
• Standards
AASHTO TP-60
Elite™ aDvanceD With innovative Features instrotek’s mc3 elite is an advanced moisture density gauge designed for operators with basic to most advanced measurement and functionality experience. this gauge is a result of over 40 years of experience in the field of measurements in rugged environments. the display is designed to provide the maximum visibility with a 4 line X 20 Character, 0.36 inch (9 mm) high character lcD. elite is loaded with simple and easy to use functions. Density, moisture and other required field parameters are automatically calculated and displayed on the display and can be stored under specific user defined projects. the data can be downloaded to a computer, printer or it can be written on a usB flash drive. the gauge is equipped with a non-contact magnetic depth indicator, an leD backlight lcD display, a backlit keypad and state of the art moisture resistant electronics. the battery pack is designed to provide weeks of operation with 6 D size nicd batteries and fully integrated aa alkaline batteries for backup. the mechanical design includes a machined aluminum base and other rugged parts to withstand the demanding construction industry environment. Elite — the cutting edge of simplicity! • Standards
ASTM D6938, D2950 and AASHTO T310
• Cs-137 source
Max 10 mCi, 370 MBq
• Am241/Be
Max 50 mCi, 1.85 GBq
• Precision: Backscatter
0.5 lb/ft3 (8 kg/m3) at 120 lb/ft3 (2000 kg/m3)
transmission
0.25 lb/ft3 (4 kg/m3) at 120 lb/ft3 (2000 kg/m3)
moisture
0.25 lb/ft3 (4 kg/m3) at 10 lb/ft3 (160 kg/m3)
• Power Source
6 NiCd rechargeable, 8 AA Alkaline backup batteries
• Weight
27.0 Ibs (60 kg)
• Top Shell
Rugged Plastic
• Shipping Case
Rugged Plastic
6
PLORER model 3500
TM
s i m p l i fY ASTM D6938, D2950 and AASHTO T310 The InstroTek® Xplorer™ 3500 strikes the perfect balance between performance, features and cost. By listening to our customers, InstroTek engineers developed a nuclear gauge that incorporates a high level of performance and reliability. It has all the right features you want in a gauge and none of the extra bells and whistles that drive costs up and reliability down. Surface mount electronics, a redesigned X-Charge™ system to prolong battery life, and intuitive gauge software makes the Xplorer 3500 the easiest and most cost-effective gauge on the market.
CPN® MC-1 DRP Portaprobe advancement & stability ASTM D6938, D2950 and AASHTO T310 The CPN MC-1DR-P offers remarkable accuracy and ease of use for the operator. An improved LCD screen makes reading test results a breeze. Simple four-button key pad allows for quick technician training and operation. Accurate and repeatable results—along with a rugged design—is why the MC-1DR-P retains a great reputation among users.
CPN® MC-S-24 Strata Gauge D UAL i t y InstroTek MC-S-24 dual probe Strata gauge is designed for density and moisture profile determinations of construction materials. The only dual probe moisture/density gauge of its kind in the industry for measurement of soils, soil/cement, roller compacted concrete and agricultural/forestry soils.
In Civil and Geotechnical fields, this device is routinely used for determination of soil and aggregate compaction for dams and embankments, as well as quality control of roller compacted concrete (RCC).
Included with every gauge are an ISO 17025 Accredited Factory Calibration.
7
CPN® 503DR Hydroprobe™ lightWeight astm D5220 the cPn 503Dr hydroprobe focuses on fast and accurate soil moisture measurements. With lightweight gauge construction in mind, the 503Dr may be easily carried by technicians. results can be directly read from the unit, stored automatically in the gauge, or transferred from the gauge to a Pc for analysis. soil moisture management experts agree that the 503Dr is the perfect tool for irrigation scheduling, agronomic and environmental research, and vadose zone monitoring.
versatility the cPn mcm-2 is a non-destructive testing system for rapid detection of entrapped moisture under insulation. ideal for petrochemical applications, the mcm-2 can quickly detect moisture content under thermal insulation of pipes and vessels. technicians can quickly evaluate potential corrosion problems and identify areas for corrosion inspection. the mcm-2 is lightweight, easy to operate, and saves data in the unit for transferring to a Pc for analysis.
TM
PortaBle veriFication the instrotek valiDator system is a portable verification and calibration system for nuclear moisture/Density gauges. the valiDator can verify and calibrate instrotek, cPn, humboldt, and troxler nuclear gauges. it’s calibration is nist traceable and accredited to iso 17025.
8
IPC Global Products the science of testing made easy Asphalt mixtu re PERFORMANCE TESTER (AMPT) Since SuperPave’s inception more than two decades ago, asphalt mix designers in North America have searched for a simple mechanical “proof” test, analogous to Marshall stability and flow tests and Hveem stabilometer method, so as not to rely solely on performance-graded (PG) binder specifications and volumetric design methods. Asphalt Mixture Performance Tester (AMPT) is the culmination of that search, based on the success of two National Cooperative Highway Research Program (NCHRP) projects. IPC has been involved in these projects from the beginning and the IPC AMPT has been approved by the NCHRP. IPC’s AMPT is an innovative, integrated hydraulic testing machine incorporating a high-performance hydraulic actuator, air-cooled hydraulic power pack, Control & Data Acquisition System (CDAS), a combined triaxial cell and environmental chamber, with its own temperature control unit, in one compact machine. The AMPT was specifically designed to perform the three tests developed under the NCHRP projects 9-19 and 9-29 and adheres to AASHTO TP-79. Numerous sensors and safety interlocks are incorporated in the design for operator safety and the triaxial cell is self-opening and closing for ease and speed of operation.
9
iPc gloBal utm systems & testing Kits unIveRsAl testI nG MACh Ines (utM) utM 5/14P the utm-5P (5 kn Pneumatic - universal testing machine) is the smallest and most popular of the iPc global universal testing machines. By coupling recent developments in pneumatic control valves with digital control technology, iPc has produced a testing machine that equals and even exceeds the performance of many electro-hydraulic testing machines; but at a fraction of their price. the utm-14P is also available for performing tests up to 14kn. the system uses iPc’s world class imacs digital controller and uts software with test modules for international and local standards ensuring it is easy to set up and conduct your tests. a range of transducers, fixtures and application software is available for various standard, general purpose and user programmable tests. utM-25 this versatile machine is based on a 25 kn capacity hydraulically-driven loadframe and was designed to meet the needs of laboratories wishing to carry out a range of tests on either bound or unbound pavement construction materials. the utm-25 is the perfect mix of a high capacity hydraulic utm system with the flexibility and accuracy of a pneumatic system. the iPc utm-25 is culmination of a development program where iPc has combined its expertise in data acquisition, control electronics, servo-hydraulics and broad knowledge of materials testing applications for the civil engineering industry. utM-100 this versatile machine is based on a 100 kn capacity hydraulically-driven loadframe and it is the highest capacity utm system produced for asphalt testing. the utm-100 extremely rigid frame is the perfect tool for testing asphalt he hydraulic crosshead makes materials at a range of different temperatures. the it easy to load iPc global’s testing jigs and platens. instrotek also provides a -100 are number of environmental chambers designed specifically for the utm-100 available for analyzing the performance of materials at non-ambient temperatures. IPC GlobAl kIts And JIGs foR utM systeM s: • Universal Triaxial Cell • Beam Fatigue Jig • Dynamic Modulus (E*) • Indirect Tensile Kit • Compression Test Kit • DC(T) Kit • TRST Kit
10
BFA 4 Point Bending beam Fa tigue Apparatus (Pneuma tic ) The 4 Point Bend Apparatus is a stand-alone system for four-point fatigue life testing of asphalt beams subjected to repeated flexural bending. The cradle mechanism allows for backlash-free rotation and horizontal translation of all load and reaction points. Pneumatic actuators at either end of the cradle center the beam laterally and clamp it. Servomotor driven clamps secure the beam at four points with a pre-determined clamping force. Haversine loading is applied to the beam via the built-in digital servo-controlled pneumatic actuator. The innovative “floating” on-specimen transducer measures and controls the true beam deflection irrespective of loading frame compliance.
PRESBOX One of the most critical parts of any test is the quality and representability of the specimen. The PReSBOX compactor, provides the latest in asphalt specimen preparation and mix evaluation technology. It produces asphalt beams and cylinders with excellent homogeneity and particle orientation. The unique shearing action of the PReSBOX closely replicates the conditions under which asphalt is placed in the field and gives a good measure of workability. Good workability does not necessarily mean poor deformation resistance, however good workability is required for optimum compaction. From the 450 x 150mm x 145 to 185mm high asphalt slab, four standard fatigue beams or four cores can be cut.
AUSTRACK A combination of a Large Wheel Tracker and Slab Compactor, AUSTRACK allows you to perform close to full scale wheel tracking performance tests on asphalt and unbound granular material on 700mm x 500mm specimens up to 300mm thick. The 300mm specimen depth is designed for performing tests of full depth constructions of unsealed unbound pavements, chip sealed pavements and asphalt pavements. For asphalt testing the insulted heated enclosure allows wheel tracking to be performed at temperatures up to 60°C. The programmable, automated, noncontact laser rut depth measurement ensures the ultimate accuracy. The rut depth measurement system can be programmed to take laser readings after a given number of cycles. Axial loads of up to 30kN are accurately applied using quiet clean low power consumption pneumatic actuator. AUSTRACK is perfect for leading Research Universities, State Highway Departments and Road Research Organizations.
11
ouR seRvICes (ISO 17025 Accredited) InstroTek,® Inc. offers a wide range of services including
InstroTek® Inc.
calibration and service of nuclear gauges, pine gyratory compactors, universal loading frames (utm), asphalt mixture Performace tester (amPt) and ncat ignition furnaces. our engineers and technicians have over 50 years of combined experience in these fields allowing us to provide our customers with superior service. Quality service is all about the level of experience of the individual technicians. our technicians are experts at what they do and they work for you to ensure fast turnaround times and superior quality.
nuCleAR GAuGe seRvICe And CAlIbRAtIon our technicians are factory trained in all disciplines of nuclear gauges and our calibration blocks are nist traceable. We provide 3 and 5 block calibrations and we are iso 17025 accredited. each calibration includes: scraper ring, top cap bumper and sliding block spring replacement, signal adjustment, full mechanical inspection, leak test and cleaning/lubrication of the gauge. No Hassle Shipping makes it even easier for you – we will prepare all shipping documents and arrange pick-up for your gauges. We repair all gauge models, cPn, humboldt, instrotek and troxler.
nuCleAR GAuGe dIsPosAl We offer the most economical solution when disposing of nuclear gauges. if you are looking to downsize your gauge inventory we can dispose of your gauge. if you choose to purchase a new gauge we will discount your purchase. (some models may not apply, call for details.)
GAuGe oPeRAtoR RAdIAtIon sAfety tRAInInG www.nuketrain.com our classes meet us Dot title 49 cFr training requirements. us Dot training (hazmat), radiation safety officer training & hazmat refresher (required every 3 years). three convenient ways to take the class: at one of our service centers, online via Webinar or at your facility. visit www.nuketrain.com to learn more about all our training services. nCAt AsPhAlt Content fuRnACe seRvICe instrotek has factory trained technicians equipped to service and maintain your ncat ignition furnace. We keep a full inventory of factory ncat furnace parts at competitive prices. you can ship it to us or we will come to you.
Pine Gyratory Calibration & ServiCe For over a decade, instrotek has been an exclusive representative of Pine instrument company in north carolina, south carolina and georgia. you can depend on instrotek to provide you with the superior and timely service you need when your production schedule is on the line. We provide full parts, service, and calibration on these machines and for added convenience we will come to you! instrotek is also the only service center to offer Iso 17025 Accredited Calibrations. routine service and calibration comes with a one year limited warranty. leAk testInG We provide leak test kits and analysis services for nuclear gauges. With our low cost and prompt turn-around service, instrotek works for you to ensure accurate and convenient measurement of your samples. the leak test kit contains all of the materials necessary for users to perform leak tests on devices containing sealed sources. RAdIAtIon suRvey MeteR CAlIbRAtIon instrotek understands the importance of keeping your survey meter calibrated and working properly. We calibrate most brands of survey meters with multi-point calibration technique. there are no short-cuts taken and our calibrations meet all regulatory requirements.
teMPeRAtuRe PRobe And PRovInG RInG CAlIbRAtIon instrotek calibrates digital temperature probes and gyratory proving ring devices for laboratory applications.
IPC GlobAl PRoduCts seRvICe & CAlIbRAtIon
sCAle CAlIbRAtIons & sAles
instrotek is a proud exclusive us distributor for all iPc global products. We provide calibration on the entire iPc product line from coast to coast and in canada.
instrotek is proud to offer sales and calibration services for all major brands of laboratory scales. all instrotek calibrations are nist traceable.
leAdeRs In tuRn ARound tIMe.
12
InstroTek’s Global Reach Nor th America
SWEDEN
TAIWAN
C a n a da
UNITED KINGDOM
VIETNAM
M exico
Near East
Africa
Central America
INDIA
SOUTH AFRICA
COSTA RICA
PAKISTAN
MOROCCO
South America
QATAR
TUNISIA
BRAZIL
SAUDI ARABIA
ALGERIA
CHILE
TURKEY
COLOMBIA
U.A.E.
ECUADOR
Far East
PERU
AUSTRALIA
Europe
CHINA
DENMARK
INDONESIA
FRANCE
JAPAN
HUNGARY
KOREA
ITALY
MALAYSIA
NETHERLANDS
PHIILIPPINES
SPAIN
SINGAPORE
For more information please visit our website www.instrotek.com/distributors to find a location near you.
13
InstroTek速 Inc.
InstroTek® Inc. innovators in instrumentation technology
For more information about our innovative products contact: InstroTek®, Inc., Raleigh, NC phone: 919.875.8371 e-mail: sales@InstroTek.com visit us at: www.InstroTek.com Other Locations: Las Vegas, NV phone: 702.270.3885 • Concord, CA phone: 925.363.9770 Grand Rapids. MI phone: 616.726.5850 and a large network of international distributors.