Replacement Parts

98 BRIGHT IDEAS

INSULATED | NON-INSULATED

ELECTRODE PINS

APPLICATION Overview over various pin lengths: Use in conjunction with M 20 [left-hand side] and M 18 [righthand side] electrodes

ELECTRODE PINS WITH TEFLON INSULATION

n For layer or core humidity measurements n The insulation prevents the measurement from being affected by surface moisture n Since only the foremost part of the pins has no insulation, layer measurements may be performed as well. n 2.5 mm [Ø] n For M 18 n Quantity per pack: 10 pcs.

n 45 mm [L], max. penetration depth: 25 mm

31004550

n 60 mm [L], max. penetration depth: 40 mm

31004500 ELECTRODE PINS WITHOUT INSULATION

n Non-isolated electrode pins show the most humid location in the material cross-section. n 2.5 mm [Ø] n For M 6, M 18, and M 20 n Quantity per pack: 100 pcs. n 16 mm [L], max. penetration depth: 10 mm

31004610

n 23 mm [L], max. penetration depth: 17 mm

31004620

n 40 mm [L], max. penetration depth: 34 mm

31004640

n 60 mm [L], max. penetration depth: 54 mm

31004660

n 20 mm [L], max. penetration depth: 8 mm

31004600

n 1.6 mm [Ø] n For (BL) Compact, (BL) Compact S, and

M 20-DS 16 conversion kit n Quantity per pack: 100 pcs.

31004500

31004550 31004660

31004640

31004610 31004620 31004600

OTHER

CONSUMABLES

CONTACT PASTE 31005400

n For measuring hard and set building materials (e.g. screed, concrete) which have to be drilled n In conjunction with M 6 and M 21 electrodes

THERMALLY CONDUCTIVE PASTE 31005500

n For improving heat transfer on rough surfaces or in case of contact problems n Recommended to be used for all contactbased temperature measurements, particularly for OT 100 (BL) and OTW 90/480