A look at Properties &Installations Procedure of Aluminium Wire
Aluminium has effectively been used in electrical applications across the world for a long time now. It takes only one pound of aluminium to bring the same effects of current compared to two pounds of copper. It is because of this reason that aluminium wire has become a highly attractive material for builders, utilities and several other purposes. Well, like copper wire, you will have to follow some installation procedures and design considerations for residential, commercial, industrial and institutional applications.
Important Things To Know: Prior to using aluminium for wiring, there are some important things for you to know. Aluminium has about 61% of conductivity compared to copper in terms of volume and 200% conductivity in terms of weight capacity. The sizing of the conductor can be easily made on the basis of the load to be carried and the applications for which it is used. There are several specific insulation standards that you will have to follow in this context.
For using as wires, you must use the series of AA-8000 required by the latest industrial standards. However, there are some exceptions mainly underground services or the ones that terminate outside the building. As far as, the thermal and mechanical performances are considered, aluminium wire is almost equivalent to copper and lower in price. Moreover, the conductors of aluminium are large in size, and the endurance capacity is greater than that of copper.
Installing Building Wire: It is crucial to note that all conductors of aluminium are not created equally. Different factors and different alloys affect the installation in different ways. For electricians, engineers, owners and inspectors, the installation of these wires can often turn out to be an uncertain subject. Make sure that you have the necessary information on installation so that you can get the best results from the same.
Aluminium alloys can comprise of different characteristics based on the variation in composition. The potential to change the characteristics is the major reason for which aluminium wire is used so widely. The alloys of the conductor are developed for different strengths, characteristics and conductivities. Performance and flexibility are certainly important factors that make it suitable for wide varieties of purposes. However, they are best avoided for applications in the overhead because of the lack of the mechanical characteristics that are required for the same. In this context, AA-8000 is recommended for using because of the physical characteristics. It is light in weight, which decreases the chances of damaging the wire in the insulation wire at the time of installing them. In addition to that, it comes with greater level of ratio in terms of strength to weight compared to copper. The conductors are less expensive, and no specific requirements have to be addressed while installing these wires.
Therefore, when you make up your mind to go for aluminium, it is always wise on your part to get them from one of the leading manufacturers. They will not only supply you the best wires, but also help you in the overall process of installation to serve your purpose.
Address: Gokul Path, Vaishali Nagar, Jaipur 302021 (Rajasthan) India Phone : +91-141-2211977 (Office) TeleFax: +91-141-2219147 (Office) Mobile : +91-94140 48492 (Mr. Gupta) Email : ganpati@ganpatiengineering.com Email : manager@ganpatiengineering.com Website: http://www.ganpatiengineering.com/