Top 3 Ways to Get Off Plastic from Copper Wires
ď‚– The electricity plays an integral part in our life. It is hard to imagine how the world would have been without it. When you talk about the electricity the first thing that comes to mind is copper wires. These wires are used in almost everything from big and small electric appliance to electric wiring for home.
BIG QUESTION: MOST OF YOU WOULD ASK - HOW TO RIP OUT PLASTIC FROM COPPER WIRES? Well, here we are going to reveal some simple technique that will help you rip plastic off copper wires. Let us take a look at some of the easiest ways to do it. 1. 2. 3. 4.
Using Pliers Melt the Plastic Using Knife Other Methods Of Barreling and Boxing up
1. Using Pliers A pair of pliers comes up as the easiest way to take out plastic. Grip the wires between the pliers and simply pull it towards the right and the plastic will come out with ease. Strictly Avoid: Some people also use blades but it is risky as there is always a probability of accidently cutting your fingers.
2. Melt the Plastic The second popular method is to use heat to melt the plastic. Boil water and then put the copper wire in it. Let it remain there for 15 minutes. Wear a pair of gloves and hold the wire tight from one end and then using the other hand slide it towards the right, the plastic will come off.
Strictly Avoid: Some people burn the wire but it reduces the quality of copper and of course burning of plastic causes air pollution. The smell of it will make breathing difficult.
3. Using Knife You can rip off plastic from the wires using a very sharp knife. Although, it is advised only if you have less length of wire otherwise it will just leave you exhausted as it is a time consuming process. When using knife, be extra careful, a small negligence may leave you injured.
Strictly Avoid: Refrain from using blunt knife.
4. Other Methods Of Barreling and Boxing up There are other methods too like barreling and boxing up the wire but it adds to non-copper weight, so most people avoid it. We have revealed the top three ways of ripping out plastic from copper wires. You can go for the one that you find convenient but make sure to take the decision according to the length of the wire. Once you have collected the bare copper wire then you can sell it to any scrap dealer and make some good profit. Before you go ahead with the deal make sure to check the online price, visit at least three online scrap dealers.
GANPATI ENGINEERING INDUSTRIES Contact Person: Mr. Gupta Address: Gokul Path, Vaishali Nagar, Jaipur - 302021 (Rajasthan) India Phone : +91-141-2211977 (Office) TeleFax: +91-141-2219147 (Office) Mobile : +91-94140 48492 (Mr. Gupta) Email : ganpati@ganpatiengineering.com Web : www.ganpatiengineering.com
Thanks & Regards