Comparing Aluminum and StainlessSteel Fan Filters Stainless steel is one of the most popular metals used for fan filters. The reason for this is fairly simple. It is durable, resistant to corrosion and rust, long-lasting, and it has a shiny finish that is visually appealing. However, not all stainless steel is of equally good quality, and some stainless-steel products may be of a lesser quality that could impact its corrosion resistance. The best way of testing whether or not your stainless-steel fan filter is constructed from top quality stainless steel is by doing something called the magnet test, and all you’ll need is an ordinary magnet like the ones you may find on your refrigerator. The way in which you do the magnet test is by holding the magnet close to the surface of the stainless-steel product, and seeing whether or not it sticks to it. If the stainless steel is magnetic, meaning that the magnet sticks to it, this means that the stainless steel is not of good quality and will be more susceptible to corrosion and rust. If the stainless steel is not magnetic, meaning that the magnet won’t stick to it, this is a good indication that your stainless-steel product is top quality.
Unfortunately, corrosion is a reality for all fan filters, especially in hot and humid environments or areas where grease is prevalent, such as a kitchen. If air particles including heat, humidity, and grease, enter a fan filter, this can cause corrosion after a certain period of time. If you are using a higher quality stainless steel fan, it is more likely to last longer than one constructed from poor-quality stainless steel. Aluminum is less resistant to corrosion than stainless steel, but aluminum fan filters will all have a protective layer to reduce the impact of corrosion. If your fan filters are cleaned regularly, aluminum filters should last just as long as stainless steel where corrosion is concerned.
Even though aluminum is not as strong as stainless steel, it is almost two thirds less heavy and significantly cheaper, which is why it is such a favored metal for items such as fan filters and the like. So, yes, stainless steel may work out slightly more expensive when it comes to a fan filter, but there are benefits to both. Stainless steel is favored for its aesthetics, strength, durability, and resistance to corrosion whereas aluminum is easier to work with, cheaper, and much more lightweight than stainless steel. The differences between stainless steel and aluminum may become more pronounced when one considers other types of items, such as power lines. Aluminum is much more conductive than stainless steel and that is why it is the top choice for power lines. On the other hand, stainless steel is the top choice for industries where high heat can be expected, as aluminum turns very soft at approximately 700°F, whereas stainless steel will remain unyielding. However, when it comes to fan filters, none of this is of critical importance, which means that whether one chooses a fan filter made from stainless steel or aluminum largely comes down to personal preference. Both an aluminum and stainless-steel fan filter will have anti-corrosion properties, but if yours is constructed from stainless steel, be sure to perform the magnet test to ensure its quality. An aluminum fan filter may also be cheaper and more lightweight than a stainless steel one, but occasionally stainless steel may be favored for its aesthetic appeal. It is up to you to decide what the deciding factor will be when considering the metal your fan filter is made from. However, regardless of which you choose, either an aluminum or stainless-steel filter will need to be routinely cleaned and inspected to extend its life and ensure a good quality, high-performing product for many years to come.
About Us: GardTec Online prides themselves on the aluminum and stainless-steel fan filter selection that they can offer their clients. The company was established in 1987, which means that they have a wealth of experience and knowledge in the fan accessory goods industry. They have become world leaders in the manufacturing of fan guards and other accessories. With a unique, client-focused customer service approach, GardTec Online is expanding their global client base, providing top-quality products and affordable shipping. Their dependable solutions are suitable for either commercial or home use. For more information on GardTec online and their selection of fan filters, please visit https://gardteconline.com/.