WASHING EQUIPMENT
WASHING EQUIPMENT
WASHER EXTRACTORS COMPARISON AMONG DIFFERENT TYPES OF WASHER EXTRACTORS
MOISTURE RETENTION TYPE OF WASHER EXTRACTOR
High Spin
FAGOR LA Series OTHER BRANDS
Fast Spin
FAGOR LR Series
Medium spin
OTHER BRANDS
Low Spin
FAGOR LB Series OTHER BRANDS
14
Washing Equipment
“G “ FACTOR
TYPE OF INSTALLATION
350
Soft mounted
55 %
45 %
30 ‘
200
Hard mounted
70 %
60 %
40 ‘
110 ÷ 140
Hard mounted
85 %
75 %
50 ‘
75 ÷ 87
Hard mounted
100 %
90 %
60 ‘
50% Cotton 100% Cotton 50% Polyester
TIME OF DRYING
WASHER EXTRACTORS COMPARISON OF THE COSTS FOR DIFFERENT TYPES OF WASHER EXTRACTORS
TYPE OF WASHER EXTRACTOR
High Spin
FAGOR LA Series OTHER BRANDS
Fast Spin
FAGOR LR Series
Medium spin
OTHER BRANDS
Low Spin
FAGOR LB Series OTHER BRANDS
TOTAL COSTS
“G “ FACTOR
DURING THE FIRST TWO YEARS
350
34
2,1
200
21
6,5
110 ÷ 140
21
6,5
75 ÷ 87
17
6,5
Cost of the machine
38,4
74,5
78,5
51
64
91,5
76,5
Cost of the installation
100
Cost for operation and energy
Washing Equipment
15
HIGH SPIN WASHER EXTRACTORS Washer Extractors - 10 - 13 - 18 - 25 Kg. Load factor: 1/10. Made of stainless steel. Microprocessor with display to control the washing process. (See characteristics of the microprocessor). Digital sequence display. Detergent dispenser with 4 compartments (pre-wash, wash, bleachers and softeners). Prepared for the connection of liquid dosing. Safety switch for door opening. Motor with frequency variator incorporated. These machines have electronic control of imbalance that detects the load uncentered before spinning. No need to be fixed to the floor. Standard : 50 - 60 Hz. WRAS approved product. ETL certified product.
Model
Code
Drum
Kg (1:10) Ø x Depth
(#)
16
Capacity
LA-18 MP E
Door
Spin speed
Power (*)
Dimensions
Ø
r.p.m.
G
KW
Volt
mm
LA-10 M E
1312031100
10
532x425
290
1.000
300
6,75
MT
692x805x1.155
LA-10 M AC
1312031101
10
532x425
290
1.000
300
2,75
MT
692x805x1.155
LA-10 M V
1312031102
10
532x425
290
1.000
300
0,75
MT
692x805x1.155
LA-10 MP E
1312031200
10
532x425
290
1.000
300
6,75
MT
692x805x1.155
LA-10 MP AC
1312031201
10
532x425
290
1.000
300
2,75
MT
692x805x1.155
LA-10 MP V
1312031202
10
532x425
290
1.000
300
0,75
MT
692x805x1.155
LA-13 M E
1312032100
13
620x430
373
1.000
350
10,00
MT
788x870x1300
LA-13 M AC
1312032101
13
620x430
373
1.000
350
4,00
MT
788x870x1300
LA-13 M V
1312032102
13
620x430
373
1.000
350
1,00
MT
788x870x1300
LA-13 MP E
1312032200
13
620x430
373
1.000
350
10,00
MT
788x870x1300
LA-13 MP AC
1312032201
13
620x430
373
1.000
350
4,00
MT
788x870x1300
LA-13 MP V
1312032202
13
620x430
373
1.000
350
1,00
MT
788x870x1300
LA-18 M E
1312033100
18
700x470
373
950
350
14,20
MT
884x914x1.404
LA-18 M AC
1312033101
18
700x470
373
950
350
6,20
MT
884x914x1.404
LA-18 M V
1312033102
18
700x470
373
950
350
2,20
MT
884x914x1.404
LA-18 MP E
1312033200
18
700x470
373
950
350
14,20
MT
884x914x1.404
LA-18 MP AC
1312033201
18
700x470
373
950
350
6,20
MT
884x914x1.404
LA-18 MP V
1312033202
18
700x470
373
950
350
2,20
MT
884x914x1.404
LA-25 M E
1312034100
25
770x530
373
900
350
21,00
V
980x1.040X1.565
LA-25 M AC
1312034101
25
770x530
373
900
350
9,00
V
980x1.040X1.565
LA-25 M V
1312034102
25
770x530
373
900
350
3,00
V
980x1.040X1.565
LA-25 MP E
1312034200
25
770x530
373
900
350
21,00
V
980x1.040X1.565
LA-25 MP AC
1312034201
25
770x530
373
900
350
9,00
V
980x1.040X1.565
LA-25 MP V
1312034202
25
770x530
373
900
350
3,00
V
980x1.040X1.565
Washing Equipment
HIGH SPIN WASHER EXTRACTORS Washer Extractors - 10 - 13 - 18 - 25 Kg. ( # ) Types of Microprocessor for models 10 - 13 - 18 & 25 Kg M : Integrated standard microprocessor 16 standard washing programs. Any of them can be selected as the standard one. Configurable water levels +/- 10%. It is possible to configure the times and temperatures of each phase, as well as to cancel them. Phase monitoring thanks to 8 LED indicators. 7-segment display with 4 digits. Up to 4 dosage signals. MP : Programmable microprocessor 99 washing programs, 16 fixed ones and 83 programmable ones, where one can choose all the variables (temperature, speed, etc...). Completely adjustable water levels. 3 water inlets (Hot water, Cold water, Soft water). Graphic display for the monitoring and programming tasks. A keyboard that is very easy to program and to use (4 keys). It has a PC connection. It is possible to program from the PC or to transfer programs. Up to 7 dosage signals whose time and delay can be modified. It is possible to create access codes. Program statistics for the user. Technical maintenance menu: self-diagnosis, alarm storage, etc. Heating systems for washer extractors 10 - 13 - 18 - 25 Kg E :
Electrical heating Heated by heating elements
AC :
Hot water Washing process with hot water. Machines with heating elements, according to the models, to elevate the temperature of water for washing programs with temperatures > 60 ºC.
V :
Heating by steam Machine works with steam produced in an external generator. Inlet pressure: 2 - 10 bar.
Accessories
for
Model
«WET CLEANING» system incorporated: - Water levels completely modifiable - Possible manual dosing for every 7 signals - Minimum washing speed: 15 r.p.m. - Minimum rhythm ON-OF: 1 second
(*) : Standard Voltages for models 10 - 13 - 18 - 25 Kg : MT : Code for 230 V III & 400 V III +N+E & 230 V 1+N+E (Single-phase) V :
Code for 400 V III +N+E ONLY (Optional, 230 V III+E)
Washer Extractors 10 - 13 - 18 - 25 Kg. Code
Description
KDD-13-18
1300000166
Kit double drainage for 13 and 18 Kg
KDD-25
1300000168
Kit double drainage for 25 Kg
KP-10
1300000163
Kit legs for LA-10, LA-13, LA-18 and LA-25
KBD-10-13
1300000180
Kit drain pump for LA-10 and LA-13
KZ-10
1300000195
Kicking strip for 10 Kg
KZ-13
1300000196
Kicking strip for 13 Kg
KZ-18
1300000197
Kicking strip for 18 Kg
KZ-25
1300000198
Kicking strip for 25 Kg
KV-10-13-18
1300000181
Kit to transform an E or AC machine (10, 13 or 18 Kg) to Steam version
KV-25
1300000182
Kit to transform an E or AC machine 25 Kg to Steam version
Washing Equipment
17
HIGH SPIN WASHER EXTRACTORS Washer Extractors - 40 - 60 - 120 Kg. Control by programmable microprocessor MP : Programmable microprocessor 99 washing programs, 16 fixed ones and 83 programmable ones, where one can choose all the variables (temperature, speed, etc...). Completely adjustable water levels. 3 water inlets (Hot water, Cold water, Soft water). Graphic display for the monitoring and programming tasks. A keyboard that is very easy to program and to use (4 keys). It has a PC connection. It is possible to program from the PC or to transfer programs. Up to 7 dosage signals whose time and delay can be modified. It is possible to create access codes. Program statistics for the user. Technical maintenance menu: self-diagnosis, alarm storage, etc. Safety door lock device. Motor with frequency variator incorporated. These machines have electronic control of imbalance that detects the load unbalanced before spinning. LA-120 MP AC
Possibility to install one automatic detergent doser on the rear of the machine. Models 40 - 60: Detergent dispenser with 5 compartments. No need to be fixed to the floor. WRAS approved product. LA-60 MP E
«WET CLEANING» system incorporated: - Water levels completely modifiable - Possible manual dosing for every 7 signals - Minimum washing speed: 15 r.p.m. - Minimum rhythm ON-OF: 1 second
Model
Code
Capacity
Drum
Kg (1:10) Ø x Depth
18
Door
Spin speed
Power (*)
Dimensions
Ø
r.p.m.
G
KW
Volt
mm
LA-40 MP E
1312035200
40
918x594
560
820
350
31,50
V
1.310x1.325x1.650
LA-40 MP AC
1312035201
40
918x594
560
820
350
15,50
V
1.310x1.325x1.650
LA-40 MP V
1312035202
40
918x594
560
820
350
7,50
V
1.310x1.325x1.650
LA-60 MP E
1312036200
60
1.048x684
560
770
350
47,00
V
1.430x1.425x1.800
LA-60 MP AC
1312036201
60
1.048x684
560
770
350
23,00
V
1.430x1.425x1.800
LA-60 MP V
1312036202
60
1.048x684
560
770
350
11,00
V
1.430x1.425x1.800
LA-120 MP AC 1312038201
120
1.350X840
700
700
350
15,00
V
1.780x1.715x2.250
LA-120 MP V
120
1.350X840
700
700
350
15,00
V
1.780x1.715x2.250
Washing Equipment
1312038202
HIGH SPIN WASHER EXTRACTORS Washer Extractors - 40 - 60 - 120 Kg. Heating systems for washer extractors 40 - 60 - 120 Kg E :
Electrical heating Heated by heating elements
AC :
Hot water Washing process with hot water. LA-40 and LA-60: Machines with heating elements, according to the models, to elevate the temperature of water for washing programs with temperatures > 60 ยบC.
V :
Heating by steam Machine works with steam produced in an external generator. Inlet pressure: 2 - 10 bar.
Accessories
for
(*) : Standard Voltages for models 40 - 60 - 120 Kg : V : Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E)
Washer Extractors 40 - 60 - 120 Kg
Model
Code
Description
KDD-40-60
1300000169
Kit double drainage for LA-40 MP, LA-60 MP
KME-40-60
1300000175
Kit water inlet hose for LA-40, LA-60
KV-40-60
1300000193
Kit to transform an E or AC machine (40, or 60 Kg) to Steam version
KEV-40-60
1300000194
Kit DOUBLE HEATING SYSTEM (Electric + Steam) for electric washer extractors 40 or 60 Kg. Reduces 1/3 of the electric power
KB-60
1300000173
Kit tilting system for LA-60
KBF-60
1300000192
Kit FRONTAL tilting system for LA-60
KZ-40
1300000183
Kit kicking strip 40 Kg
KZ-60
1300000184
Kit kicking strip 60 Kg
KDD-120
1300000170
Kit double drainage for LA-12 MP
KB-120
1300000174
Kit tilting system for LA-120
KBF-120
1300000191
Kit FRONTAL tilting system for LA-120
Tilting System Washer Extractor LA-120 MP - Tilting sequence
Back: loading the clothes
Vertical: working
Forward: discharge of the clothes
Washing Equipment
19
HIGH SPIN WASHER EXTRACTORS Memory Kit Programming system of Fagor Industrial, “Wash Control”, available in 10 languages. Can be incorporated in all MP models. The Memory Kit includes: - one card of external memory - one wire to connect to the computer - one CD - one manual with instructions for installation The software for PC “Wash Control” allows the creation of new washing programs in a computer and the transfer of these to the washing machine directly, or to another Memory Kit, or to a file to send by e-mail. It also allows to discharge the statistics and control data for the technicians. The union of the software “Wash Control” with the Memory Kit provides a great flexibility to the users that use specific programs, facilitating their creation, use and transfer.
Model KM
20
Washing Equipment
Code
Description
1300000172
Memory Kit
Price
HIGH SPIN WASHER EXTRACTORS Codes
for the
Electrical Connections
and
Voltages
Mod.
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
LA-10 M E
1312031100
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 M AC
1312031101
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 M V
1312031102
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 MP E
1312031200
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 MP AC
1312031201
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 MP V
1312031202
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 M E
1312032100
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 M AC
1312032101
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 M V
1312032102
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 MP E
1312032200
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 MP AC
1312032201
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 MP V
1312032202
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 M E
1312033100
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 M AC
1312033101
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 M V
1312033102
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 MP E
1312033200
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 MP AC
1312033201
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 MP V
1312033202
ST
ST
ST
ST
ST
ST
NO
NO
LA-25 M E
1312034100
ST
1312034110
NO
ST
1312034110
NO
NO
NO
LA-25 M AC
1312034101
ST
1312034111
NO
ST
1312034111
NO
NO
NO
LA-25 M V
1312034102
ST
1312034112
NO
ST
1312034112
NO
NO
NO
LA-25 MP E
1312034200
ST
1312034210
NO
ST
1312034210
NO
NO
NO
LA-25 MP AC
1312034201
ST
1312034211
NO
ST
1312034211
NO
NO
NO
LA-25 MP V
1312034202
ST
1312034212
NO
ST
1312034212
NO
NO
NO
LA-40 MP E
1312035200
ST
1312035210
NO
ST
1312035210
NO
NO
NO
LA-40 MP AC
1312035201
ST
1312035211
NO
ST
1312035211
NO
NO
NO
LA-40 MP V
1312035202
ST
1312035212
NO
ST
1312035212
NO
NO
NO
LA-60 MP E
1312036200
ST
1312036210
NO
ST
1312036210
NO
NO
NO
LA-60 MP AC
1312036201
ST
1312036211
NO
ST
1312036211
NO
NO
NO
LA-60 MP V
1312036202
ST
1312036212
NO
ST
1312036212
NO
NO
NO
LA-120 MP AC
1312038201
ST
1312038211
NO
ST
1312038211
NO
NO
NO
LA-120 MP V
1312038202
ST
1312038212
NO
ST
1312038212
NO
NO
NO
LA-10 MA E
1312031103
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 MA AC
1312031104
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 MA E
1312032103
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 MA AC
1312032104
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 MA E
1312033103
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 MA AC
1312033104
ST
ST
ST
ST
ST
ST
NO
NO
Self - Service
Washing Equipment
21
FAST SPIN WASHER EXTRACTORS Washer Extractors 10 - 13 - 18 - 25 Kg.
NEW PRODUCT
Load factor: 1/10. Made of stainless steel. M: Microprocessor with display to control the washing process. 16 standard washing programs. Any of them can be selected as the standard one. Configurable water levels +/- 10%. It is possible to configure the times and temperatures of each phase, as well as to cancel them. Phase monitoring thanks to 8 LED indicators. 7-segment display with 4 digits. Up to 4 dosage signals. Possibility to install one automatic detergent doser on the rear of the machine. Detergent deposit with 4 compartments (pre-wash, wash, bleachers and softeners). Safety switch for door opening. Motor with frequency variator incorporated.
G Factor = 200 Hard mounted machine. Elements included. Machine must be fixed to the floor. WRAS approved product. ETL certified product. LR-18 M
Model
Code
Capacity
Drum
Kg (1:10) Ă˜ x Depth
22
Door
Spin speed
Power (*)
Dimensions
Ă˜
r.p.m.
G
KW
Volt
mm
LR-10 M E
1311031100
10
532x425
290
820
200
6,75
MT
692x805x1.155
LR-10 M AC
1311031101
10
532x425
290
820
200
0,75
MT
692x805x1.155
LR-10 M V
1311031102
10
532x425
290
820
200
0,75
MT
692x805x1.155
LR-13 M E
1311032100
13
620x430
373
760
200
10,00
MT
788x870x1.300
LR-13 M AC
1311032101
13
620x430
373
760
200
1,00
MT
788x870x1.300
LR-13 M V
1311032102
13
620x430
373
760
200
1,00
MT
788x870x1.300
LR-18 M E
1311033100
18
620x600
373
760
200
14,20
MT
788x1.080x1.300
LR-18 M AC
1311033101
18
620x600
373
760
200
2,20
MT
884x914x1.404
LR-18 M V
1311033102
18
620x600
373
760
200
2,20
MT
884x914x1.404
LR-25 M E
1311034100
25
700x680
373
715
200
21,00
V
884x1.150x1.404
LR-25 M AC
1311034101
25
700x680
373
715
200
3,00
V
884x1.150x1.404
LR-25 M V
1311034102
25
700x680
373
715
200
3,00
V
884x1.150x1.404
Washing Equipment
FAST SPIN WASHER EXTRACTORS Washer Extractors 10 - 13 - 18 - 25 Kg.
NEW PRODUCT
Heating systems for washer extractors 10 - 13 - 18 - 25 Kg E :
Electrical heating Heated by heating elements
AC :
Hot water Washing process with hot water from an external boiler.
V :
Heating by steam Machine works with steam produced in an external generator. Inlet pressure: 2 - 10 bar.
(*) :
Standard Voltages :
MT :
Code for 230 V III & 400 V III +N+E and 230 V 1+N+E (Single-phase)
V:
Code for 400 V III +N+E ONLY (Optional, 230 V III+E)
Under special order : Ship voltage 440 V III : Tri-phase without neutral 60 Hz. Only for electrical heating.
Bases
to
Be Fixed
The machines must be fixed to the floor. All the machines need one base to be fixed. The price of the base is included in the price of the machine. The codes to order the bases are in the right table
Base to be fixed
Code
Washer extractor LR-10
1300000201
Washer extractor LR-13
1300000202
Washer extractor LR-18
1300000200
Washer extractor LR-25
1300000199
Accessories
for
Model KBD-10-13
Washer Extractors 10 - 13 - 18 - 25 Kg. Code
Description
1300000180
Kit drain pump for LR-10 and LR-13
Washing Equipment
23
LOW SPIN WASHER EXTRACTORS Automatic Washer Extractors 10 - 13 - 18 - 25 Kg Load factor: 1/10. Made of stainless steel. M : Integrated standard microprocessor 16 standard washing programs. Any of them can be selected as the standard one. Configurable water levels +/- 10%. It is possible to configure the times and temperatures of each phase, as well as to cancel them. Phase monitoring thanks to 8 LED indicators. 7-segment display with 4 digits. Up to 4 dosage signals. Possibility to install one automatic detergent doser on the rear of the machine. Detergent deposit with 4 compartments (pre-wash, wash, bleachers and softeners). Safety switch for door opening. Motor with frequency variator incorporated. Hard mounted machines. Elements included. Machine must be fixed to the floor.
Model
Code
Capacity
LB-10 M E
Drum
Kg (1:10) Ă˜ x Depth
Door
Spin speed
Power (*)
Ă˜
r.p.m.
G
KW
Volt
Dimensions mm
LB-10 M E
1310021100
10
532x425
290
500
75
6,75
MT
692x805x1.155
LB-10 M AC
1310021101
10
532x425
290
500
75
2,75
MT
692x805x1.155
LB-10 M V
1310021102
10
532x425
290
500
75
0,75
MT
692x805x1.155
LB-13 M E
1310012100
13
620x430
373
500
87
10,00
MT
788x870x1300
LB-13 M AC
1310012101
13
620x430
373
500
87
4,00
MT
788x870x1300
LB-13 M V
1310012102
13
620x430
373
500
87
1,00
MT
788x870x1300
LB-18 M E
1310013100
18
700x470
373
475
87
14,20
MT
884x914x1.404
LB-18 M AC
1310013101
18
700x470
373
475
87
6,20
MT
884x914x1.404
LB-18 M V
1310013102
18
700x470
373
475
87
2,20
MT
884x914x1.404
LB-25 M E
1310024100
25
770x530
373
450
87
21,00
V
980x1.040X1.565
LB-25 M AC
1310024101
25
770x530
373
450
87
9,00
V
980x1.040X1.565
LB-25 M V
1310024102
25
770x530
373
450
87
3,00
V
980x1.040X1.565
WARNING Hydro-extractor is recommended to complete the wash process with a low speed washing machine. The extracted clothes can be introduced with a low grade of humidity in an ironer or in a flatwork ironer to be ironed and dried.
24
Washing Equipment
LOW SPIN WASHER EXTRACTORS Automatic Washer Extractors 10 - 13 - 18 - 25 Kg Heating systems for washer extractors 10 - 13 - 18 - 25 Kg E :
Electrical heating Heated by heating elements
AC :
Hot water Washing process with hot water. Machines with heating elements, according to the models, to elevate the temperature of water for washing programs with temperatures > 60 ยบC.
V :
Heating by steam Machine works with steam produced in an external generator. Inlet pressure: 2 - 10 bar.
(*) :
Standard Voltages :
MT : V:
Code for 230 V III & 400 V III +N+E (Tri-phase) and 230 V 1+N+E (Single-phase) Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E)
Under special order : Ship voltage 440 V III : Tri-phase without neutral 60 Hz. Only for electrical heating.
Bases
to
Be Fixed
The machines must be fixed to the floor. All the machines need one base to be fixed. The price of the base is included in the price of the machine. The codes to order the bases are in the right table
Base to be fixed
Code
Washer extractor 10 Kg
1300000161
Washer extractor 13 Kg
1300000084
Washer extractor 18 Kg
1300000085
Washer extractor 25 Kg
1300000165
Accessories
for
Model KBD-10-13
Washer Extractors 10 - 13 - 18 - 25 Kg. Code
Description
1300000180
Kit drain pump for LM-10 and LM-13
Washing Equipment
25
HYDRO - EXTRACTORS Hydro - Extractors The hydro-extractor is the indispensable complement to complete the wash process with a low speed washing machine. The centrifuged clothes can be introduced with a low grade of humidity in an ironer or in a flatwork ironer to be ironed and dried. Lid and drum built of stainless steel. Outer casing made of white-varnished steel. Automatic drum brake. Adjustable timer for spin cycles (15’) Safety device for lid opening. Floating-suspension drum and motor. Voltage: 230 V III & 400 V III +N+E (Tri-phase) Machines must be fixed to floor. Elements included.
Model
Code
Capacity Kg
26
Drum
Spin speed
Vol.(lit) Ø x Hight (mm) r.p.m.
Power (*)
Dimensions
G
KW
Volt
mm
CE-9
1320100100
9
41
Ø 425 x 335
1.500
530
0,60
MT
Ø 586 x H 831
CE-15
1320100200
15
67
Ø 480 x 405
1.500
600
1,10
MT
Ø 665x H 949
Washing Equipment
CODES FOR THE ELECTRICAL CONNECTIONS AND VOLTAGES Fast Spin Washer Extractors Mod.
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
LR-10 M E
1311031100
ST
ST
ST
ST
ST
60 Hz
60 Hz
60 Hz
ST
1311031106
LR-10 M AC
1311031101
ST
ST
ST
ST
NO
ST
ST
NO
NO
LR-10 M V
1311031102
ST
ST
ST
LR-13 M E
1311032100
ST
ST
ST
ST
ST
ST
NO
NO
ST
ST
ST
1311032106
LR-13 M AC
1311032101
ST
ST
NO
ST
ST
ST
ST
NO
LR-13 M V
1311032102
ST
NO
ST
ST
ST
ST
ST
NO
NO
LR-18 M E
1311033100
LR-18 M AC
1311033101
ST
ST
ST
ST
ST
ST
1311033106
NO
ST
ST
ST
ST
ST
ST
NO
LR-18 M V
NO
1311033102
ST
ST
ST
ST
ST
ST
NO
NO
LR-25 M E
1311034100
ST
1311034110
NO
ST
1310034110
NO
1311034106
NO
LR-25 M AC
1311034101
ST
1311034111
NO
ST
1310034111
NO
NO
NO
LR-25 M V
1311034102
ST
1311034112
NO
ST
1310034112
NO
NO
NO
LR-10 MA E
1311031103
ST
ST
ST
ST
ST
ST
NO
NO
LR-10 MA AC
1311031104
ST
ST
ST
ST
ST
ST
NO
NO
LR-13 MA E
1311032103
ST
ST
ST
ST
ST
ST
NO
NO
LR-13 MA AC
1311032104
ST
ST
ST
ST
ST
ST
NO
NO
LR-18 MA E
1311033103
ST
ST
ST
ST
ST
ST
NO
NO
LR-18 MA AC
1311033104
ST
ST
ST
ST
ST
ST
NO
NO
LR-25 MA E
1311034103
ST
1311034113
NO
ST
1311034113
NO
NO
NO
LR-25 MA AC
1311034104
ST
1311034114
NO
ST
1311034114
NO
NO
NO
440 III
110 I+T
Self - Service
Low Spin Washer Extractors Mod.
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
LB-10 M E
1310021100
ST
ST
ST
ST
ST
ST
1310021106
NO
LB-10 M AC
1310021101
ST
ST
ST
ST
ST
ST
NO
NO
LB-10 M V
1310021102
ST
ST
ST
ST
ST
ST
NO
NO
LB-13 M E
1310012100
ST
ST
ST
ST
ST
ST
1310012106
NO
LB-13 M AC
1310012101
ST
ST
ST
ST
ST
ST
NO
NO
LB-13 M V
1310012102
ST
ST
ST
ST
ST
ST
NO
NO
LB-18 M E
1310013100
ST
ST
ST
ST
ST
ST
1310013106
NO
LB-18 M AC
1310013101
ST
ST
ST
ST
ST
ST
NO
NO
LB-18 M V
1310013102
ST
ST
ST
ST
ST
ST
NO
NO
LB-25 M E
1310024100
ST
1310024110
NO
ST
1310024110
NO
1310024106
NO
LB-25 M AC
1310024101
ST
1310024111
NO
ST
1310024111
NO
NO
NO
LB-25 M V
1310024102
ST
1310024112
NO
ST
1310024112
NO
NO
NO
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
CE-9
1320100100
ST
ST
NO
1320100111 1320100112
NO
NO
CE-15
1320100200
ST
ST
NO
1320100211 1320100212
NO
NO
Hydro - Extractors Mod.
Washing Equipment
27
HIGH SPEED SANITARY BARRIER WASHER EXTRACTORS Sanitary Barrier Washer Extractors - 16 -22 Kg. «ASEPTIC» WASHER EXTRACTORS They have a door to load the dirty washing on one side, with another door to discharge the clean washing on the other side (hygienic system that avoids contact between dirty and clean washing). Electronic programme by programmable microprocessor. 5 standard programs and possibility to make 25 new programs, selecting all the characteristics: temperature, time, wash cycles. Display to control the cycles and phases. Electronic thermostat. Load and discharge doors: 400 x 310 mm. Detergent deposit with 4 compartments (pre-wash, wash, bleachers and softeners). Safety switch for door opening. Motor with frequency variator incorporated. Electrical connection: 400 V - 3+N. Machines need to be fixed to the floor.
Model
Code
(#)
Capacity
Drum
Spin speed
Kg (1:10) Ø x Depth r.p.m.
Power
Dimensions
G
KW-el
Heating
mm
14,20
12,00 KW - Elec
980x910x1.365
2,20 13 Kg/h - Steam
980x910x1.365
LBS/E-16 MPP
2351324910
16
633x500
1000
361
LBS/V-16 MPP
2351324912
16
633x500
1000
361
LBS/E-22 MPP
2351324950
22
633x700
1000
361
LBS/V-22 MPP
2351324952
22
633x700
1000
361
20,20
18,00 KW - Elec 1.180x910x1.385
2,20 13 Kg/h - Steam 1.180x910x1.385
(#)
Heating systems for Sanitary Barrier washer extractors
E :
Electrical heating: Heated by heating elements
V :
Heating by steam: Machine works with steam produced in an external generator. Inlet pressure: 2 - 10 bar.
Accessories
for
Model
LBS Washer Extactors, 16
22 Kg
Code
Description
KC-16
2351324990
Kit curtains for LBS-16
KC-22
2351324992
Kit curtains for LBS-22
Side view of the LBS/E-16 MPP washer extractor. The open doors show the load and discharge areas. Inserting the washing machine in a wall, the areas are totally isolated, with a door to each side of the wall, avoiding the contact between the dirty clothes and the clean clothes.
28
and
Washing Equipment
HIGH SPEED SANITARY BARRIER WASHER EXTRACTORS Sanitary Barrier Washer Extractors
up to
100 Kg.
«ASEPTIC» WASHER EXTACTORS They have a door to load the dirty washing on one side, with another door to discharge the clean washing on the other side (hygienic system that avoids contact between dirty and clean washing). Electronic programme by programmable microprocessor. 5 standard programs and possibility to make 25 new programs, selecting all the characteristics: temperature, time, wash cycles. Display to control the cycles and phases. Electronic thermostat. Drum of horizontal rotation, with 1 compartment (models 27 - 33 - 49 Kg) or 2 compartments (models 67 - 100 Kg). Load and discharge doors: 515x465 mm. (900x500 mm for 100 Kg). Detergent deposit with 4 compartments (pre-wash, wash, bleachers and softeners). Safety switch for door opening. Motor with frequency variator incorporated. Electrical connection: 400 V - 3+N.
LBS/E-100 MPP
Machines need to be bolted to the floor. LBS/E-27 MPP
Model
Code
(#)
Capacity
Drum
Spin speed
Kg (1:10) Ø x Depth r.p.m.
G
Power KW-el
Heating
Dimensions mm
LBS/E-27 MPP
2351324920
27
800x534
1000
448
22,00 18,00 KW - Elec 1.172x1.053x1.655
LBS/V-27 MPP
2351324922
27
800x534
1000
448
4,00 18 Kg/h - Steam 1.172x1.053x1.655
LBS/E-33 MPP
2351324930
33
800x694
1000
448
31,00 27,00 KW - Elec 1,292x1.053x1.665
LBS/V-33 MPP
2351324932
33
800x694
1000
448
4,00 26 Kg/h - Steam 1,292x1.053x1.665
LBS/E-49 MPP
2351324940
49
800x974
1000
448
41,50 36,00 KW - Elec 1,612x1.053x1.665
LBS/V-49 MPP
2351324942
49
800x974
1000
448
5,50 40 Kg/h - Steam 1,612x1.053x1.665
LBS/E-67 MPP
2351324960
67
800x1327
900
366
50,50 45,00 KW - Elec 1,965x1.053x1.665
LBS/V-67 MPP
2351324962
67
800x1327
900
366
5,50 75 Kg/h - Steam 1,965x1.053x1.665
LBS/V-100 MPP 2351324982
90
1050x1032
750
325
15,00 85 Kg/h - Steam 1.680x1.345x2.000
(#)
Heating systems for Sanitary Barrier washer extractors
E :
Electrical heating: Heated by heating elements
V :
Heating by steam: Machine works with steam produced in an external generator. Inlet pressure: 2 - 10 bar.
Accessories
for
Model
LBS Washer Extactors, 27, 33, 49, 67, 100 Kg Code
Description
KC-27
2351324991
Kit curtains for wall - LBS-27
KC-33
2351324993
Kit curtains for wall - BS-33
KC-49
2351324994
Kit curtains for wall - LBS-49
KC-67
2351324995
Kit curtains for wall - LBS-67
KC-100
2351324996
Kit curtains for wall - LBS-100
Washing Equipment
29
HIGH SPEED SANITARY BARRIER WASHER EXTRACTORS Codes
for the
Electrical Connections
and
Voltages
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
LBS/E-16 MPP
2351324910
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-16 MPP
2351324912
ST
NO
NO
NO
ST
NO
NO
NO
LBS/E-22 MPP
2351324950
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-22 MPP
2351324952
ST
NO
NO
NO
ST
NO
NO
NO
LBS/E-27 MPP
2351324920
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-27 MPP
2351324922
ST
NO
NO
NO
ST
NO
NO
NO
LBS/E-33 MPP
2351324930
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-33 MPP
2351324932
ST
NO
NO
NO
ST
NO
NO
NO
LBS/E-49 MPP
2351324940
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-49 MPP
2351324942
ST
NO
NO
NO
ST
NO
NO
NO
LBS/E-67 MPP
2351324960
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-67 MPP
2351324962
ST
NO
NO
NO
ST
NO
NO
NO
LBS/V-100 MPP
2351324982
ST
NO
NO
NO
ST
NO
NO
NO
Mod.
30
Washing Equipment
TUMBLE DRYERS
TUMBLE DRYERS
TUMBLE DRYERS Low Capacity Tumble Dryers ( 10 - 13 Kg ) White, «skin plate» steel body. Drum in stainless steel. Reversing system of the drum. Ø door: 574 mm. Fluff filter in lower part. Drive motor with frequency inverter. Safety switch for opening door. Standard models Dry cycle controlled by timer. Temperature selector. Final cooling cycle. Start switch. Pilots for heating and cycle. MP models with microprocessor Electronic microprocessor with 10 standard programs that can be modified by the user. Control of the temperature and dry time. Final cooling cycle. Anti-wrinkles system. Display for temperature and time. Selector of humidity: Selector of hunidity incorporated, that allows to programme a degree of dry in order that the machine stops on having reached it. Three levels: dry, semidry and humid for ironing. Model
Code
Capacity (Kg) (1:20)
Drum
(1:25) Ø x Depth
SR/E-13
Power (*) Heating
Dimensions
Total Electric.
mm
SR/E-10
1500011100
10,5
8,4
750x475
ELEC
12,0 KW
12,40 KW
T
785x857x1.665
SR/G-10
1500011101
10,5
8,4
750x475
GAS
20,5 KW
0,40 KW
MT
785x857x1.665
SR/V-10
1500011102
10,5
8,4
750x475 STEAM 50 Kg/h
0,40 KW
MT
785x857x1.665
SR/E-10 MP
1500011300
10,5
8,4
750x475
ELEC
12,0 KW
12,40 KW
T
785x857x1.665
SR/G-10 MP
1500011301
10,5
8,4
750x475
GAS
20,5 KW
0,40 KW
MT
785x857x1.665
SR/V-10 MP
1500011302
10,5
8,4
750x475 STEAM 50 Kg/h
0,40 KW
MT
785x857x1.665
SR/E-13
1500012100
16,5
13,2
750x746
ELEC
18,0 KW
18,40 KW
T
785x1.127x1.665
SR/G-13
1500012101
16,5
13,2
750x746
GAS
20,5 KW
0,40 KW
MT
785x1.127x1.665
SR/V-13
1500012102
16,5
13,2
750x746 STEAM 50 Kg/h
0,40 KW
MT
785x1.127x1.665
SR/E-13 MP
1500012300
16,5
13,2
750x746
ELEC
18,0 KW
18,40 KW
T
785x1.127x1.665
SR/G-13 MP
1500012301
16,5
13,2
750x746
GAS
20,5 KW
0,40 KW
MT
785x1.127x1.665
SR/V-13 MP
1500012302
16,5
13,2
750x746 STEAM 50 Kg/h
0,40 KW
MT
785x1.127x1.665
(#) :
Heating systems
(*) : Standard Voltages : T: Code for 230 V III & 400 V III +N+E (Tri-phase) MT : Code for 230 V III & 400 V III +N+E (Tri-phase) & 230 V 1+N+E (Single-phase)
E :
Electrical heating Heated by heating elements
G :
Gas heating Heating system by gas burner with safety device and ignition system.
V :
Steam heating Machine works with steam produced in an external generator. Inlet pressure: 5 - 8 bar.
OPTION: Ship voltage 440 V III (Tri-phase without neutral) 60 Hz.
Option
for
Tumble Dryers
Model S. H.
32
Tumble Dryers
with
MP Microprocessor
Code
Description
13
Selector of humidity: a percentage of residual humidity can be programmed in the dryer so that the drying process concludes when detecting the fixed value.
TUMBLE DRYERS Medium Capacity Tumble Dryers ( 23 - 32 Kg ) White, «skin plate» steel body. Drum in stainless steel. Reversing system of the drum. Drive motor with frequency inverter. Safety switch for opening door. Ø door: 574 mm. Fluff filter in lower part. Standard models Dry cycle controlled by timer. Temperature selector. Final cooling cycle. Start switch. Pilots for heating and cycle. MP models with microprocessor Electronic microprocessor with 10 standard programs that can be modified by the user. Control of the temperature and dry time. Final cooling cycle. Display for temperature and time. Anti-wrinkles system. Selector of humidity: Selector of hunidity incorporated, that allows to programme a degree of dry in order that the machine stops on having reached it. Three levels: dry, semidry and humid for ironing.
Model
Code
Capacity (Kg) (1:20)
(1:25)
SR/E-23 MP
Drum Ø x Depth
Power (*) Heating
Total Electric.
SR/E-23
1500013100
28,75
23
855x905
ELEC
30,0 KW 30,80 KW
SR/G-23
1500013101
28,75
23
855x905
GAS
30,0 KW
SR/V-23
1500013102
28,75
23
855x905 STEAM 42,0 KW
SR/E-23 MP
1500013300
28,75
23
855x905
ELEC
30,0 KW 30,80 KW
SR/G-23 MP
1500013301
28,75
23
855x905
GAS
30,0 KW
SR/V-23 MP
1500013302
28,75
23
855x905 STEAM 42,0 KW
SR/E-32 MP
1500024300
37,7
30,1
947x936
ELEC
SR/G-32 MP
1500024301
37,7
30,1
947x936
GAS
SR/V-32 MP
1500024302
37,7
30,1
(#) :
Heating systems
E :
Electrical heating Heated by heating elements
G :
Gas heating Heating system by gas burner with safety device and ignition system.
V :
Steam heating Machine works with steam produced in an external generator. Inlet pressure: 5 - 8 bar.
Dimensions mm
V
890x1.330x1.781
0,85 KW
MT
890x1.330x1.781
0,85 KW
MT
890x1.330x1.781
V
890x1.330x1.781
0,85 KW
MT
890x1.330x1.781
0,85 KW
MT
890x1.330x1.781
36,0 KW 37,00 KW
V
985x1.134x1.916
41,0 KW
1,00 KW
T
985x1.134x1.916
947x936 STEAM 70,0 KW
1,00 KW
T
985x1.134x1.916
(*) : Standard Voltages : T: Code for 230 V III & 400 V III +N+E (Tri-phase) MT :
Code for 230 V III & 400 V III +N+E (Tri-phase) & 230 V 1+N+E (Single-phase)
V:
Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E)
OPTION : Ship voltage 440 V III (Tri-phase without neutral) 60 Hz.
Option
for
Tumble Dryers
Model S. H.
with
MP Microprocessor
Code
Description
13
Selector of humidity: a percentage of residual humidity can be programmed in the dryer so that the drying process concludes when detecting the fixed value.
Tumble Dryers
33
TUMBLE DRYERS High Capacity Tumble Dryers ( 40 - 60 - 80 Kg ) White, «skin plate» steel body. Drum in stainless steel. Reversing system of the drum. Drive motor with frequency inverter. Safety switch for opening door. Models 40 & 60 Kg: Ø door: 931 mm. Models 80 Kg: Ø door: 720 mm. Fluff filter in lower part. All models with microprocessor Electronic microprocessor with 10 standard programs that can be modified by the user. Control of the temperature and dry time. Final cooling cycle. Display for temperature and time. Anti-wrinkles system. Selector of humidity: Selector of humidity incorporated, that allows to programme a degree of dry in order that the machine stops on having reached it. Three levels: dry, semidry and humid for ironing. IN OPTION : Tilting system for 80 Kg model.
SR/E-40 MP
Model
Code
Capacity (Kg) (1:20)
(1:25)
Drum Ø x Depth
Total Electric.
mm
1500014300
45,0
36,0
1225x760 ELEC
54,0 KW 56,20 KW
V
1.270x1.085x2.490
SR/G-40 MP
1500014301
45,0
36,0
1225x760 GAS
60,0 KW
2,25 KW
T
1.270x1.085x2.490
SR/V-40 MP
1500014302
45,0
36,0
1225x760 STEAM 100,0 KW
2,25 KW
T
1.270x1.085x2.490
SR/E-60 MP
1500015300
60,0
48,0
1225x1020 ELEC
72,0 KW 74,20 KW
V
1.270x1.345x2.490
SR/G-60 MP
1500015301
60,0
48,0
1225x1020 GAS
80,0 KW
2,25 KW
T
1.270x1.345x2.490
SR/V-60 MP
1500015302
60,0
48,0
1225x1020 STEAM 124 Kg/h
2,25 KW
T
1.270x1.345x2.490
SR/G-80 MP
1500006301
83,8
67,1
1400x1089 GAS 139,5 KW
5,50 KW
T
1.466x1.695x2.600
SR/V-80 MP
1500006302
83,8
67,1
1400x1089 STEAM 400 Kg/h
5,50 KW
T
1.466x1.695x2.600
Heating systems
E :
Electrical heating Heated by heating elements
G :
Gas heating Heating system by gas burner with safety device and ignition system.
V :
Steam heating Machine works with steam produced in an external generator. Inlet pressure: 5 - 8 bar.
for
Tumble Dryers
Model S. H.
34
Heating
Dimensions
SR/E-40 MP
(#) :
Option
Power (*)
Tumble Dryers
(*) : Standard Voltages : T: Code for 230 V III & 400 V III +N+E (Tri-phase)
with
V:
Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E)
OPTION : Ship voltage 440 V III (Tri-phase without neutral) 60 Hz.
MP Microprocessor
Code
Description
13
Selector of humidity: a percentage of residual humidity can be programmed in the dryer so that the drying process concludes when detecting the fixed value.
TUMBLE DRYERS Low Capacity Tumble Dryers ( 10 - 13 Kg ) “Economic Line” « ECONOMIC LINE» Tumble Dryers White, «skin plate» steel body. Dry cycle controlled by timer. Temperature selector. Final cooling cycle. Start switch. Pilots for heating and cycle. Safety switch for lock door. Transmission by means of belts Fluff filter in lower part. Drum in galvanized steel. Drum diameter: Ø 750 mm. Door diameter: Ø 574 mm.
Model
Code
Capacity (Kg) (1:20)
Drum
(1:25) Ø x Depth
Power (*) Heating
Dimensions
Total Electric.
mm
SC/E-10
1500011400
10,5
8,4
750x475
ELEC
12,0 KW
12,40 KW
T
785x857x1.665
SC/G-10
1500011401
10,5
8,4
750x475
GAS
20,5 KW
0,40 KW
MT
785x857x1.665
SC/E-13
1500012400
16,5
13,2
750x746
ELEC
18,0 KW
18,40 KW
T
785x1.127x1.665
SC/G-13
1500012401
16,5
13,2
750x746
GAS
20,5 KW
0,40 KW
MT
785x1.127x1.665
(#) : Heating systems E :
Electrical heating Heated by heating elements
G :
Gas heating Heating system by gas burner with safety device and ignition system.
(*) : Standard Voltages : T : Code for 230 V III & 400 V III +N+E (Tri-phase) MT :
Code for 230 V III & 400 V III +N+E (Tri-phase) & 230 V 1+N+E (Single-phase)
Tumble Dryers
35
TUMBLE DRYERS Codes
for the
Electrical Connections
and
Voltages
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
SR/E-10
1500011100
ST
ST
NO
ST
ST
NO
1500011160
NO
SR/G-10
1500011101
ST
ST
ST
ST
ST
ST
NO
NO
SR/V-10
1500011102
ST
ST
ST
ST
ST
ST
NO
NO
SR/E-10 MP
1500011300
ST
ST
NO
ST
ST
NO
1500011360
NO
SR/G-10 MP
1500011301
ST
ST
ST
ST
ST
ST
NO
NO
SR/V-10 MP
1500011302
ST
ST
ST
ST
ST
ST
NO
NO
SR/E-13
1500012100
ST
ST
NO
ST
ST
NO
1500012160
NO
SR/G-13
1500012101
ST
ST
ST
ST
ST
ST
NO
NO
SR/V-13
1500012102
ST
ST
ST
ST
ST
ST
NO
NO
SR/E-13 MP
1500012300
ST
ST
NO
ST
ST
NO
1500012360
NO
SR/G-13 MP
1500012301
ST
ST
ST
ST
ST
ST
NO
NO
SR/V-13 MP
1500012302
ST
ST
ST
ST
ST
ST
NO
NO
SR/E-23
1500013100
ST
1500013110
NO
ST
1500013140
NO
1500013160
NO
SR/G-23
1500013101
ST
ST
ST
ST
ST
ST
NO
NO
SR/V-23
1500013102
ST
ST
ST
ST
ST
ST
NO
NO
SR/E-23 MP
1500013300
ST
1500013310
NO
ST
1500013340
NO
1500013360
NO
SR/G-23 MP
1500013301
ST
ST
ST
ST
ST
ST
NO
NO
SR/V-23 MP
1500013302
ST
ST
ST
ST
ST
ST
NO
NO
SR/E-32
1500014100
ST
1500014110
NO
ST
1500014140
NO
1500004160
NO
SR/G-32
1500014101
ST
ST
1500014121
ST
ST
1500014151
NO
NO
SR/V-32
1500014102
ST
ST
1500014122
ST
ST
1500014152
NO
NO
SR/E-32 MP
1500024300
ST
1500024310
NO
ST
1500024340
NO
1500004360
NO
SR/G-32 MP
1500024301
ST
ST
1500024321
ST
ST
1500024351
NO
NO
SR/V-32 MP
1500024302
ST
ST
1500024322
ST
ST
1500024352
NO
NO
SR/E-40 MP
1500014300
ST
1500014310
NO
1500014330 1500014340
NO
NO
NO
SR/G-40 MP
1500014301
ST
ST
NO
1500014331 1500014341
NO
NO
NO
SR/V-40 MP
1500014302
ST
ST
NO
1500014332 1500014342
NO
NO
NO
SR/E-60 MP
1500015300
ST
1500015310
NO
1500015330 1500015340
NO
NO
NO
SR/G-60 MP
1500015301
ST
ST
NO
1500015331 1500015341
NO
NO
NO
SR/V-60 MP
1500015302
ST
ST
NO
1500015332 1500015342
NO
NO
NO
SR/G-80 MP
1500006301
ST
ST
NO
1500006331 1500006341
NO
NO
NO
SR/V-80 MP
1500006302
ST
ST
NO
1500006332 1500006342
NO
NO
NO
SR/E-10 A
1500011130
ST
ST
NO
ST
ST
NO
NO
NO
SR/G-10 A
1500011131
ST
ST
1500011132
ST
ST
1500011133
NO
NO
SR/E-13 A
1500012130
ST
ST
NO
ST
ST
NO
NO
NO
SR/G-13 A
1500012131
ST
ST
1500012132
ST
ST
1500012133
NO
NO
SR/E-23 A
1500013130
ST
ST
NO
ST
ST
NO
NO
NO
SR/G-23 A
1500013131
ST
ST
1500013132
ST
ST
1500013133
NO
NO
Mod.
Self-Service
36
Tumble Dryers
IRONING AND FOLDING
IRONING AND FOLDING
IRONERS, FLATWORK IRONERS AND FOLDERS Characteristics
and
Therms
of
Use
and Installation
Type / model of the appliance Characteristics and therms of use and installation
PS-20 MP
PS-35 MP
PS-50 MP
PS-80 “POLARIS”
Roller Ø (mm)
200
325
500
800
800
800
1.000
1.400
1.900
1.600
2.500
3.200
3.200
3.200
3.300
2.000
3.200
Electric
Electric
Electric
Electric
Gas
Gas
Gas
Gas
Gas
Steam
Steam
Steam
Steam
Steam
Roller Length (mm)
1.400
Electric Heating systems
Production (Kg/h)
Speed (m/min)
12 ÷ 14
10 ÷ 35
55 ÷ 80
100 ÷ 140
100 ÷ 140
100 ÷ 140
350 ÷ 1.100
1÷5
1 ÷ 6,5
1 ÷ 7,5
3 ÷ 15
3 ÷ 15
3 ÷ 15
5 ÷ 40
FRONT
FRONT
FRONT
FRONT
FRONT
FRONT
REAR
REAR
REAR
REAR
SIDE STACKING
SIDE STACKING
Exit of the articles
38
Complete PS-80 PL PS-80 PL+AP line SAGITTA “POSEIDON” “PHOENIX” + PS-1000 + SIRIO
Longitudinal folding
NO
NO
NO
NO
2
2
2
Cross folding
NO
NO
NO
NO
NO
3
3
People to obtain the maximum production
1÷2
2÷3
2÷4
2÷3
2÷3
2
2÷4
Minimun surface (m2)
5
6 ÷ 7,5
10,5 ÷ 14,5
22 ÷ 25
22 ÷ 25
27
73 ÷ 93
Ironers and Folders
IRONERS Ironers Outer casing of varnished steel, white colour. Roller coated in NOMEX. Works by means of a pedal. Strap feeding. Return feed design requires minimum installation space. Safety protector for hands. Controlled by microprocessor. Temperature control by thermostat. Safety thermostat. Electric heating system. Electrical connection: 400 V - 3+N / 230 V - 3 Warning: Entry with 15% ÷ 20% maximum humidity
Model
Code
Roller (mm) Ø
Speed.
Length m/min
Product
Power KW
Kg/h
Heating Motor
(F)
Dimensions mm
PE-25/100 MP
2304922200
250
1.000
3,90
25
5,00
0,18
-
1.400x420x1.005
PE-25/120 MP
2304922220
250
1.200
3,90
30
6,00
0,18
-
1.600x420x1.005
PE-25/140 MP
2304922240
250
1.400
3,90
35
7,00
0,18
-
1.800x420x1.005
PE-30/160 MP
2304922360
300
1.600
2÷4
50
13,20
0,50
YES
2.200x500x1.100
PE-30/200 MP
2304922380
300
2.000
2÷4
60
16,80
0,70
YES
2.600x500x1.100
( F ) :
Special features for Ø 30 models
- Variator of frequency Possibility to select between 7 speeds
- Extraction system Machines built-in extractor
Ironers and Folders 39
FLATWORK IRONERS Ø 35
cm
Flatwork Ironers
Heated roller ironers. Outer casing of varnished steel, white colour. NOMEX - POLYESTER feeding straps. Special NOMEX ironing straps. Return feed design requires minimum installation space. Roller diameter: 325 mm. Ergonomically designed control panel. Speed and temperature controlled by microprocessor with troubleshooting. Safety thermostat. Safety protector for hands. Automatic cool-down stop (80 ºC) 7 speeds controlled by variator of frequency: 1-6,5 m/min. Extraction system: 500 m3/h. Entry with 45% maximum humidity
Model
Code
Roller Product Length
PSE-35/140 MP
Kg/h
Syst.
extrac. Elec. KW
40
Dimensions
Gas KW
KW
Volt.
mm
10÷16
1
12,00
-
12,50
V
1.942x660x1.112
PSG-35/140 MP 2351324401 1.400
10÷16
1
-
14,00
0,50
V
1.942x660x1.112
PSE-35/160 MP
2351324402 1.600
20÷25
1
16,00
-
16,50
V
2.192x660x1.112
PSG-35/160 MP 2351324403 1.600
20÷25
1
-
20,05
0,50
V
2.192x660x1.112
PSE-35/200 MP
2351324404 2.000
30÷35
1
20,00
-
20,50
V
2.542x660x1.112
PSG-35/200 MP 2351324405 2.000
30÷35
2
-
30,00
0,50
V
2.542x660x1.112
Electrical heating Stainless steel heating elements on the roller. Electrical connection: 400 V - 3+N / 230 V - 3
PSG : Gas heating Tubular burners made of stainless steel on the roller. Ignition system and safety thermostat. E :
Pow. Electr.
2351324400 1.400
Heating systems PSE :
Power - Heating
Double extraction system Two independent systems of extraction with two motors at each side
Ironers and Folders
(*) : Standard Voltages : V: Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E) T: Code for 230 V III & 400 V III + N+E (Tri-phase)
FLATWORK IRONERS Ø 50
cm
Flatwork Ironers
Heated roller ironers. Outer casing of varnished steel, white color. NOMEX - POLYESTER feeding straps. Special NOMEX ironing straps. Return feed design requires minimum installation space. Roller diameter: 500 mm. Ergonomically designed control panel. Speed and temperature controlled by microprocessor with troubleshooting. Safety thermostat. Safety protector for hands. Automatic cool-down stop (80 ºC) 7 speeds controlled by variator of frequency: 1-7,5 m/min. Extraction system: 600 m3/h. Entry with 45% maximum humidity Model
Code
Roller Produc. Syst.
Heating power
Pow Electr.
Length Kg/h extrac. El. KW Gas KW Steam Kg
mm
1
31,50
-
-
32,50
V
2.974x1.070x1.170
PSG-50/190 MP 2351324411 1.900 55÷60
2
-
40,00
-
1,00
V
2.974x1.070x1.170
PSV-50/190 MP 2351324412 1.900 55÷60
1
-
-
50,00
1,00
T
2.974x1.070x1.170
PSE-50/250 MP 2351324413 2.500 65÷70
2
40,50
-
-
41,50
V
3.574x1.070x1.170
PSG-50/250 MP 2351324414 2.500 65÷70
2
-
55,00
-
1,00
V
3.574x1.070x1.170
PSV-50/250 MP 2351324415 2.500 65÷70
2
-
-
67,00
1,00
T
3.574x1.070x1.170
PSE-50/320 MP 2351324416 3.200 75÷80
2
54,00
-
-
55,00
V
4.274x1.070x1.170
PSG-50/320 MP 2351324417 3.200 75÷80
2
-
69,00
-
1,00
V
4.274x1.070x1.170
PSV-50/320 MP 2351324418 3.200 75÷80
2
-
-
85,00
1,00
T
4.274x1.070x1.170
Accessory to adapt into the flatwork ironers of Ø 50 cm, to make a primary folding Heating systems Electrical heating Stainless steel heating elements on the roller.
PSG : Gas heating Tubular burners made of stainless steel on the roller. Ignition system and safety thermostat. PSV :
KW Volt.
PSE-50/190 MP 2351324410 1.900 55÷60
Primary Folder
PSE :
Dimensions
Optional element PRIMARY MECHANICAL FOLDER
(*) : Standard Voltages : V: Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E) T: Code for 230 V III & 400 V III +N+E (Tri-phase)
Steam heating Heated by steam, produced in an external generator. Built-in inlet and outlet valves. Steam pressure to work with the maximum temperature: 10 bar Steam temperature not regulated.
Ironers and Folders 41
FLATWORK IRONERS - Ø 80 cm Ø 80
cm
Flatwork Ironers / “Polaris” Series / “Poseidon” Series,
with
Folder
It works on 1 or 2 independent lanes. Linen outlet in the front part of the machine, optional rear outlet. Maximum ironing capacity: 135 kg/h. (at a humidity of the 50%), 180 kg/hour (at a humidity of the 30%) Outer casing made of white-lacquered steel. Control through a microprocessor (PLC). Roll of Ø 800 mm and length of 3.200 mm. Steel-coated roll. NOMEX - POLYESTER feeding straps. Special NOMEX ironing straps. Adjustable ironing speed between: 3 ÷ 12 m/min. Safety protector for the hands. Electronic thermostat and probe to adjust the temperature. Compact machine: Maximum space required: 10 m2. Extraction system: 2 x 1000 m3/h. Compressed air (necesary): 7 bar. Voltage: 400 V 3+N + E.
“Polaris” Series (Without Folder) Compressed air: 7 bar - 20 Nl/hour. Model
Code
Roller
POLARIS
Produc.
Heating power
Ø Length Kg/h (*) El. KW
Gas KW Steam Kg
El. Power
Dimensions
KW
mm
PSE-80/320
2305639090 800 3.200
180
75,00
-
-
77,20
4385x1.885x2.035
PSG-80/320
2305639091 800 3.200
180
-
127,40
-
2,20
4385x1.885x2.035
PSV-80/320
2305639092 800 3.200
180
-
-
185,00
2,20
4385x1.885x2.035
“Poseidon” Series - With Lengthwise Folder Primary folder with a maximum two folders. Controlled by PLC, that allows folding to be selected automatically according to the pieces size. Compressed air: 7 bar - 9,000 Nl/hour.
Model
Code
Roller
POSEIDON
Produc.
Heating power
Ø Length Kg/h (*) El. KW
Gas KW Steam Kg
El. Power
Dimensions
KW
mm
PSE-80/320 PL 2305639190 800 3.200
180
75,00
-
-
77,20
4385x1.885x2.220
PSG-80/320 PL 2305639191 800 3.200
180
-
127,40
-
2,20
4385x1.885x2.200
PSV-80/320 PL
180
-
-
185,00
2,20
4385x1.885x2.200
2305639192 800 3.200
(*) Estimated production for clothes with humidity maximum 30%. With 50% humidity, production descends 30%.
Accessories
and
Options
Model
42
for
“Poseidon”
and
“Polaris” Series
Code
Description
FEEDER
2305639180
Feeder for models PS-80
2nd EXIT TABLE
2305639181
Second exit table for PS-80
2 WAYS NP COLL
2305639183
2 ways Napkins collector for PS-80
4 WAYS NP COLL
2305639184
4 ways Napkins collector for PS-80
VACUUM TABLE
2305639185
Vacuum table to facilitate and to improve the introduction
Ironers and Folders
FLATWORK IRONERS - Ø 80 cm Ø 80
cm
Flatwork Ironers “Phoenix” Series,
with
Folder
and
Stacker
Wall flatwork ironer with a roll of Ø 800 mm and a length of 3.200 mm. Compact machine: maximum space required: 27 m2. High production, with a primary and cross folder and a side stacker. You can work and fold in two different lines, with a maximum width of 1.500 mm each one. Maximum capacity for two primary and three cross folds. Clothes outlet in the front part of the machine, optional rear outlet. Stacker for 1-10 big clothes and 1-20 medium clothes. It is possible to choose the stacker’s outlet side and direction. Maximum ironing capacity: 135 kg/h (at a humidity of the 50%), 180 kg/h (at a humidity of the 30%) Outer casing made of white-lacquered steel. Control through a microprocessor (PLC) that allows folding automatically depending on the dimensions of the clothes and creating up to 20 programs. Vacuum table to improve and facilitate the incorporated feeding. Standard partial by-pass. Clothes rejection system through a push button. Steel-coated roll. NOMEX - POLYESTER feeding straps. Special NOMEX ironing straps. Adjustable ironing speed between: 3 ÷ 12 m/min. Safety protector for the hands. Electronic thermostat and probe to adjust the temperature. Incorporated extraction system: 2x1000 m3/h. Necessary compressed air pressure: 7 bar. Compressed air consumption: 20.400 Nl/hour. Voltage: 400 V 3+N + E.
“Phoenix” Series 2 Primary Folds 3 Cross Folds Model
Code
PHOENIX
Roller
Produc. (*)
Heating power
Power
Dimensions
el. KW
mm
Ø
Length.
Kg/h
El. KW
PSE-80/320 PL+AP 2305639223
800
3.200
180
75,00
-
-
80,80
5.570x2.355x2.325
PSG-80/320 PL+AP 2305639224
800
3.200
180
-
127,40
-
5,80
5.570x2.355x2.325
PSV-80/320 PL+AP
800
3.200
180
-
-
185,00
5,80
5.570x2.355x2.325
2305639225
Gas KW Steam Kg
(*) Estimated production for clothes with humidity maximum 30%. With 50% humidity, production descends 30%.
Accessories
for
“Phoenix” Series Model
Code
Description
FEEDER PHOENIX
2305639280
Feeder for PHOENIX
2 WAYS NP COLL PHOENIX
2305639283
2 ways Napkins collector for PHOENIX
4 WAYS NP COLL PHOENIX
2305639284
4 ways Napkins collector for PHOENIX
Ironers and Folders 43
IRONERS AND FLATWORK IRONERS Codes
for the
Electrical Connections
and
Voltages
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
PE-25/100 MP
2304922200
ST
ST
NO
2304922202 2304922202
NO
NO
NO
PE-25/120 MP
2304922220
ST
ST
NO
2304922202 2304922202
NO
NO
NO
PE-25/140 MP
2304922240
ST
2304922241
NO
2304922242 2304922243
NO
NO
NO
PE-30/160 MP
2304922360
ST
2304922361
NO
2304922362 2304922363
NO
NO
NO
PE-30/200 MP
2304922380
ST
2304922381
NO
2304922382 2304922383
NO
NO
NO
PSE-35/140 MP
2351324400
ST
2351324440
NO
2351324460 2351324480
NO
NO
NO
PSG-35/140 MP
2351324401
ST
2351324441
NO
2351324461 2351324481
NO
NO
NO
PSE-35/160 MP
2351324402
ST
2351324442
NO
2351324462 2351324482
NO
NO
NO
PSG-35/160 MP
2351324403
ST
2351324443
NO
2351324463 2351324483
NO
NO
NO
PSE-35/200 MP
2351324404
ST
2351324444
NO
2351324464 2351324484
NO
NO
NO
PSG-35/200 MP
2351324405
ST
2351324445
NO
2351324465 2351324485
NO
NO
NO
PSE-50/190 MP
2351324410
ST
2351324450
NO
2351324470 2351324490
NO
NO
NO
PSG-50/190 MP
2351324411
ST
2351324471
NO
2351324471 2351324491
NO
NO
2351324251
PSV-50/190 MP
2351324412
ST
ST
NO
2351324472 2351324492
NO
NO
NO
PSE-50/250 MP
2351324413
ST
2351324453
NO
2351324473 2351324493
NO
NO
NO
PSG-50/250 MP
2351324414
ST
2351324474
NO
2351324474 2351324494
NO
NO
2351324254
PSV-50/250 MP
2351324415
ST
ST
NO
2351324475 2351324495
NO
NO
NO
PSE-50/320 MP
2351324416
ST
2351324456
NO
2351324476 2351324496
NO
NO
NO
PSG-50/320 MP
2351324417
ST
2351324477
NO
2351324477 2351324497
NO
NO
2351324257
PSV-50/320 MP
2351324418
ST
ST
NO
2351324478 2351324498
NO
NO
NO
PSE-80/320
2305639090
ST
NO
NO
NO
2305639093
NO
NO
NO
PSG-80/320
2305639091
ST
NO
NO
NO
2305639094
NO
NO
NO
PSV-80/320
2305639092
ST
NO
NO
NO
2305639095
NO
NO
NO
PSE-80/320 PL
2305639190
ST
NO
NO
NO
2305639193
NO
NO
NO
PSG-80/320 PL
2305639191
ST
NO
NO
NO
2305639194
NO
NO
NO
PSV-80/320 PL
2305639192
ST
NO
NO
NO
2305639195
NO
NO
NO
PSE-80/320 PL+AP
2305639223
ST
NO
NO
NO
2305639293
NO
NO
NO
PSG-80/320 PL+AP
2305639224
ST
NO
NO
NO
2305639294
NO
NO
NO
PSV-80/320 PL+AP
2305639225
ST
NO
NO
NO
2305639295
NO
NO
NO
Mod.
44
Ironers and Folders
FINISHING
FINISHING
IRONING TABLES Ironing Tables Vacuum finishing table with iron. Swinging arm with suction and heated sleeve shape. Works by means of a pedal. Models with incorporated generator and other models ready to be connected to an external steam boiler. Electrical heating. Temperature controlled by thermostat. Work table dimensions: 1.200x400x250 mm. Electrical connection: 400 V - 3+N / 230 V - 3
Model
Code
Charact.
Power (KW)
(*)
Boiler
Iron
Table
Arm
Dimensions
Aspir. Pump
Total
mm
MRP/AC
2303852200
C
3,90
0,83
1,00
0,14
0,45
0,38
6,70
1.550x580x1.120
MRP/A
2303852210
V
-
0,83
1,00
0,14
0,45
-
2,50
1.480x480x1.100
MRP/ASC
2303852300
C-S
3,90
0,83
1,00
0,14
0,45
0,38
6,70
1.700x450x1.100
MRP/AS
2303852310
V-S
-
0,83
1,00
0,14
0,45
-
2,50
1.700x450x1.100
MRP/ASC-BA 2303852400
C-S-G
3,90
0,83
1,00
0,14
0,45
0,38
6,70
1.700x450x2.230
MRP/AS-BA
V-S-G
-
0,83
1,00
0,14
0,45
-
2,50
1.700x450x2.230
2303852410
Specific characteristics S:
Blowing Equipped with blowing. With a built-in vacuum unit featuring a pneumatically driven valve witch controls both the vacuum and the blowing device. The machine needs an external connection of compressed air or a compressor. Air inlet : Ø 1/4 ‘’ Pressure; 5 bar.
R:
Rail guides The machine is provided with rail with guides for the slip of the iron.
46
Finishing
C:
Built-in steam generator Electrical steam generator with automatic water feeding and automatic pressure control. Pressure: 2.6 bares.
V:
Connection to an external steam generator The machine is designed for connection to a central steam supply. Inlet pressure: 3 bar.
PNEUMATIC PRESSES Pneumatic Presses Lower part with steam in all the models. Press head with polished head for laundry, without steam, in “L” models. Work table dimensions: 1.180 x 380 x 220 mm. Lowering of the press head controlled by two push buttons. Steam inlet in the press head by push button. Steam inlet in the lower part by push pedal. All the models equipped with a vacuum unit. “C” Models These models needs an air compressor unit. Air pressure: 6 bar. These models needs also a steam inlet and outlet. Steam pressure: 4,5 bar. Volume of air to extract: 400 m3. Electrical connection: 400 V - 3+N / 230 V - 3 “A” Models Built-in air compressor unit. Buil-in electric steam generator, with automatic water feeding and automatic pressure control. Air pressure: 6 bar. Steam pressure: 4,5 bar. Volume of air to extract: 400 m3. Built-in vacuum unit for the lower part. Press head and lower part with steam injection («L» models only in the lower part) Electrical connection: 400 V - 3+N / 230 V - 3
Model
L:
Code
Compressor Pump
Aspir.
Boiler Total P.
Dimensions
Compr. Air
Steam
lit/min
Kg/h
HP
HP
HP
KW
KW
mm
PU-88 C
2303852600
45,00
20,00
-
-
0,60
-
-
1.450x1.070x1.500
PU-88 LC
2303852601
45,00
20,00
-
-
0,60
-
-
1.450x1.070x1.500
PU-88 A
2303852610
-
-
2,00
0,70
0,60
18,00
22,00
1.450x1.070x1.500
PU-88 LA
2303852611
-
-
2,00
0,70
0,60
18,00
22,00
1.450x1.070x1.500
Models with polished head for laundry
Finishing
47
FORM FINISHERS Form Finishers for Coats, Jackets and Dresses Ideal unit for the finishing of coats, jackets, ladies’ dresses... The working cycle is completely automatic and the steaming and drying duration is adjustable by three timers. The shoulder width and the bag are adjustable. The support of the bag (frame) with its controls rotates to 360º. “C” Model Without steam boiler, to be connected to a central steam supply. It needs a steam inlet and outlet. Electrical connection: 400 V - 3+N / 230 V - 3 “A” Model Complete with built-in steam boiler, 24.9 litres, with automatic water feeding and automatic pressure control (4,5 bar). Electrical connection: 400 V - 3+N / 230 V - 3
Model
Code
Steam
Pump
Fan
Boiler
Total Pow
Dimensions
bar
Kg/h
HP
HP
KW
KW
mm
MA-360 C
2303852700
3÷6
10÷15
-
-
-
-
1.200X580X1.620
MA-360 A
2303852710
-
-
0,80
1,00
12,00
13,50
1.360x610x1.780
Form Finisher
for
Shirts
and
Jackets
Automatic steam body former for the ironing of shirts, overalls and similar. To be connected to a central steam supply, featuring: Two sleeve stretchers with double independent traction Front heated and reclining panel Automatic carriage with photocell for the stretching of side and back part. Powerful 3 HP fan. Button placket part of the dummy with suction. Electronic card featuring ten programs for an automatic working cycle. Steam iron connection complete with «all-steam»-iron. Air superheater ranging from 0° to 350° C. Electronic card for the setting of 9 ironing cycles in total. It needs compressed air: Pressure: 5-6 bar Consumption: 20 Nl/min.
Model
MC-101
48
Finishing
Code
2303852760
Steam
Compressed air
Total Power
Dimensions
bar
Kg/h
bar
Nl/min
KW
mm
-
-
5÷6
20,00
3,50
2.000x1.900x1.700
FORM FINISHERS Finishing Topper
for
Trousers
Finishing topper for trousers. With air-operated waistband and leg stretching device, for central steam and compressed air supplies. Side waistband stretching device. Height adjustable leg stretching carriage and leg clamps made of stainless steel. Built-in three phases fan. Air heating device. Electronic card for the setting of 9 ironing cycles in total. Ironing cycle controlling: steaming time, steam/air time, drying time. Three pressure regulators (for leg clamps, waistband stretcher and leg stretching carriage). Switch for the exclusion of the leg stretching carriage. Manual size indicator. Mechanical airflow regulator. Steam working pressure: 5 bar. Steam consumption: 20 kg/hour. It needs compressed air, 5 bar - 40 Nl/min.
Model
T-3000
Code
2303852740
Steam
Compressed air
Total Power
Dimensions
bar
Kg/h
bar
Nl/min
KW
mm
5,00
20,00
5÷6
40,00
1,00
1.115x630x1.950
Finishing Cabinets Cabinet supplied as standard with one trouser finishing device and one form finisher for jackets, coats, dresses, etc. Supplied complete with all the necessary accessories for the finishing of the trousers and of the jackets and coats (dummy, trousers waist band stretcher, curved clamp for jackets, straight trouser clamps, vertical clamps, multiple connection, wooden and silicon sleeve stretchers) Controlled by an easy to use microprocessor, capable of running up to nine fully automatic programs, amendable by the user. Automatic starting cycle after closing the door. “C” Model Without steam boiler, to be connected to a central steam supply. It needs a steam inlet and outlet Electrical connection: 400 V - 3+N / 230 V - 3 “A” Model Complete with built-in steam boiler, 24.9 litres, with automatic water feeding and automatic pressure control (4,5 bar). Electrical connection: 400 V - 3+N
Model
Code
Steam
Pump
Fan
Boiler
Total Pow
Dimensions
bar
Kg/h
HP
HP
KW
KW
mm
BOX-1 C
2303852800
4÷5
16÷20
-
1,00
-
1,00
1.080x960x1.850
BOX-1 A
2303852810
-
-
0,75
1,00
18,00
19,50
1.080x960x1.850
Finishing
49
FINISHING Codes
for the
Mod.
50
Electrical Connections
and
Voltages
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
MRP/AC
2303852200
ST
ST
2303852221
2303852222 2303852222 2303852224
NO
NO
MRP/A
2303852210
ST
ST
2303852231
2303852234
NO
NO
MRP/ASC
2303852300
ST
ST
2303852321
2303852322 2303852322 2303852324
NO
NO
MRP/AS
2303852310
ST
ST
2303852331
2303852334
NO
NO
MRP/ASC-BA
2303852400
ST
ST
2303852421
2303852422 2303852422 2303852424
NO
NO
MRP/AS-BA
2303852410
ST
ST
2303852431
2303852434
NO
NO
PU-88 C
2303852600
ST
2303852620
2303852621
2303852622 2303852623 2303852624
NO
NO
PU-88 LC
2303852601
ST
2303852630
2303852631
2303852632 2303852633 2303852634
NO
NO
PU-88 A
2303852610
ST
2303852640
2303852641
2303852642 2303852643 2303852644
NO
NO
PU-88 LA
2303852611
ST
2303852650
2303852651
2303852652 2303852653 2303852654
NO
NO
MA-360 C
2303852700
ST
2303852720
2303852721
2303852722 2303852723 2303852724
NO
NO
MA-360 A
2303852710
ST
2303852730
2303852731
2303852732 2303852733 2303852734
NO
NO
T-3000
2303852740
ST
2303852750
2303852751
2303852752 2303852753 2303852754
NO
NO
MC-101
2303852760
ST
2303852770
2303852771
2303852772 2303852773 2303852774
NO
NO
BOX-1 C
2303852800
ST
2303852820
2303852821
2303852822 2303852823 2303852824
NO
NO
BOX-1 A
2303852810
ST
2303852830
2303852831
2303852832 2303852833 2303852834
NO
NO
Finishing
ST ST ST
ST ST ST
ACCESSORIES
ACCESSORIES
TROLLEYS Room
service trolleys
Chrome-plated steel structure. Four pivoting wheels. Three shelves of stainless steel. Sail-cloth bag for dry laundry.
Model
Code
Description
Dimensions mm
CSH-S
2351502504
One single bag and three shelves
CSH-D
2351502503
Two bags and three shelves
1.220x500x1.100
Description
Dimensions
Trolleys
700x500x1.100
for dry laundry
Chrome-plated steel structure. Two fixed wheels and two pivoting wheels. Sail-cloth bag for dry laundry.
Model
Code
mm
Wet
CRS-1200
2351502501
One sail-cloth bag
1.200x560x885
CRS-1600
2351502502
One sail-cloth bag
1.600x560x885
laundry trolleys
Reinforced polyester bin. Four pivoting wheels. Models CRH-40 and CRH-60: Tap for water disposal in lower part.
Model
Code
Capacity
Characteristics
Dimensions mm
52
CRH-20
2351134301
20 Kg of wet laundry
-
655x560x715
CRH-40
2351134302
40 Kg of wet laundry
Tap for water disposal
875x560x715
CRH-60
2351134303
60 Kg of wet laundry
Tap for water disposal
930x560x715
Accessories
TROLLEYS Trolleys
with lifting bottom
Made of light alloy, anodized. Mobile bottom. With springs in the base of the trolley to maintain a constant level. Two fixed wheels and two pivoting wheels.
Model
Code
Internal dimensions
Wheels
mm
Cage
Dimensions mm
CFM-1
2305593100
1.000x420x545
Ø 100
1.030x450x800
CFM-2
2305593200
1.000x600x545
Ø 100
1.030x630x800
CFM-3
2305593300
1.360x645x545
Ø 125
1.390x675x800
trolleys
Rolling metallic base with two side panels and rear panel made of galvanized iron bars. Side plate to mark. Four pivoting wheels. The trolley supports 2,000 Kg
Model
Code
Description
Dimensions mm
CR-L
2305451100
Two side panels. Open front and back
680x800x1.700
CR-A
2305451110
Abatible front door at 60 %
680x810x1.700
CR-P
2305451120
Two small doors. With shelf
680x810x1.700
Clothes
rack
Trolley
Made of chromed steel. Four castors.
Model
Code
Dimensions mm
PM-15
2303702100
1.500x530x1.500
Accessories
53
54
Accessories
PROFESSIONAL LAUNDRY
PROFESSIONAL LAUNDRY
PROFESSIONAL LAUNDRY - WASH AND DRY Professional Washer Extractor Stainless steel wash basket and outer tub. Four shock absorbers. Capacity: 8 kg. Electronic programmable controls. Cycles: Normal, Permanent press or delicate. Water temperatures: 30 ºC - 40 ºC - 60 ºC - 90 ºC Permanent press / 60 ºC - Delicate / 30 ºC. Cycle time: 31 - 35 minutes. Basket volume: 80 litres. Door diameter: Ø 270 mm. Spin speed: 500 - 650 - 1,000 rpm. G factor: 300. Motor with variable speed induction, 750 W (3/4 HP) and thermal protection. Drain pump. Heating element: 4,8 KW. Maximum power: 5.5 KW. Electrical connection: 400 V - 3+N+E / 230 V - 3+E 230 V - 1+N+E Dimensions: 683 x 711 x 1,092 mm Model
Code
LA-8 M E
Spin speed
LA-8 M E INOX
Outer
Capacity
Door
casing
Kg (1:10)
Ø
r.p.m.
G
KW
Power (*) Volt
Dimensions mm
LA-8 M E
2351029200
White
8
270
1000
300
5,50
MT
683x711x1.092
LA-8 M E INOX
2351029220
St. steel
8
270
1000
300
5,50
MT
683x711x1.092
(*) Electrical connection : MT : Code for 230 V III & 400 V III +N+E and 230 V 1+N+E
Professional Tumble Dryer Capacity: 8 Kg. Electronic programmable controls. Safety door switch. Drum: Ø 660 mm, depth 580 mm. Drum volume: 198 litres. Start button. 4 programs. Program for cold drying. Timer and final cooling cycle. Fluff filter in lower part. Heating system: electric. Heating power: 4.8 KW. Dimensions: 683 x 711 x 1,080 mm
SR/E-8
Model
Code (*)
(1:25)
Door Ø x Depth
Power
Dimensions
KW
Volt.
mm 683x711x1.080 683x711x1.080
SR/E-8
2351029120 (M) 2351029130 (T)
8
6,4
660x580
5,40
M T
SR/E-8 INOX
2351029150 (T)
8
6,4
660x580
5,40
T
(*)
Electrical connection:
M: T:
230 V - 1+N+E 400 V - 3+N+E
56
Capacity (Kg) (1:20)
SR/E-8 INOX
Professional Laundry
/ 230 V - 3+E
PROFESSIONAL LAUNDRY - WASH AND DRY Stack Washer / Dryer Stacking unit «washer & dryer» CLS/E-8 M (outer casing in white varnished steel ) CLS/E-8 M INOX (outer casing made of stainless steel) Connection: 230 V - III+E // 400 V - III+N+E . Dimensions of the stacking assembly: 683 x 711 x 1,950 mm
WASHER EXTRACTOR Stainless steel wash basket and outer tub. Four shock absorbers. Capacity: 8 kg. Electronic programmable controls. Cycles: Normal, Permanent press or delicate. Water temperatures: 30 ºC - 40 ºC - 60 ºC - 90 ºC Permanent press / 60 ºC - Delicate / 30 ºC. Cycle time: 31 - 35 minutes. Basket volume: 80 litres. Spin speed: 500 - 650 - 1,000 rpm. G factor: 300. Motor with variable speed induction, 750 W (3/4 HP) and thermal protection. Drain pump. Heating element: 4.8 KW. - Maximum power: 5.5 KW. TUMBLE DRYER Capacity: 8 Kg. Electronic programmable controls. Safety door switch. Drum: Ø 660 mm, depth 580 mm. Drum volume: 198 litres. Heating system: electric. Heating power: 4.8 KW.
Model
Code
Description
Dimensions mm
CLS/E-8 M
2351029300
Stacking unit LA-8 M E + SR/E-8
683x711x1.950
CLS/E-8 M INOX
2351029320
Stacking unit LA-8 M E + SR/E-8
683x711x1.950
Professional Laundry
57
PROFESSIONAL LAUNDRY - IRONING Top Ironer (Entry
with
15%
maximum humidity)
Outer casing of varnished steel, white colour. Iron made in Aluminium. Roller length: 800 mm. Diameter: 180 mm. Roller covered in temperature resistent cotton. Return feed design requires minimun installation space. Safety protector for hands. Temperature control by thermostat. Electrical cnnection: 220 V - I+T
Model
Code
Legs
Roller (mm) Ø
Speed.
Length m/min
Product
Power
Dimensions
Kg/h
KW
mm
PME-80 S
2304922000
NO
180
800
2,10
16
2,45
1.000x360x470
PME-80 SP
2304922010
YES
180
800
2,10
16
2,45
1.000x360x1.010
Ironer (Entry
with
15%
humidity maximum)
Outer casing of varnished steel, white colour. Iron made in Aluminium. Roller length: 1.000 mm. Diameter: 180 mm. Roller covered in temperature resistent cotton. Ironing speed: 2,1 m/min. Production: 20 kg/h. Pedal operated. Return feed design requires minimun installation space. Safety protector for hands. Temperature control by thermostat. Electrical cnnection: 400V III+N+T / 220V I + T.
Model
Code
Roller (mm)
Speed
Product.
Power
Dimensions
Ø
Length
m/min
Kg/h
KW
mm
PE-18/100 S
2304922100
180
1.000
2,80
20
3,35
1.150x400x940
PE-18/120 S
2304922120
180
1.200
2,80
25
4,05
1.350x400x940
Syst.
Pow. Electr.
Dimensions
Flatwork Ironer (Entry
with
45%
maximum humidity)
Outer casing of white varnished steel. Steel roller. Return feed design requires minimum installation space. Strap feeding. NOMEX ironing straps. Safety protector for hands. Temperature control thermostat. Ironing speed regulated by frequency variator. Temperature and speed with microprocessor control. Self auto diagnostic control. Automatic STOP by thermostat when roller is below 80 ºC. High - limit safety thermostat.
Model
Code
Roller Ø
PSE-20/140 MP
58
Professional Laundry
2351324220
200
Speed. Product.
Length m/min 1.400
1÷4,5
Kg/h
extract.
KW
12÷14
Ø 50 mm 11,00
Volt.
mm
V
1.940x500x1.200
PROFESSIONAL LAUNDRY - FINISHING Ironing Table Folding ironing table with suction Electrically warmed plate. Aspiration by means of a pedal. Dimensions of the work table: 1.100 x 380 X 240 mm. Options: Small steam generator with iron Trolley support CP-R
Model
MPA
Electric
Code
Caract.
2303852110
Power (KW)
(*)
Boiler
Iron
Table
Arm
-
-
-
0,33
-
Dimensions
Suction Pump 0,10
Total
mm
0,43
1.380x380x930
-
steam boiler with iron
Small steam generator, isolated thermally. Equiped with Iron. Amount of adjustable steam. Aluminum alloy boiler. Manual water feeding. Autonomy: 2/3 hours. Automatic control of the pressure by means of fixed thermostat. In option: trolley-support CP-R
BETA-3 with support CP-R
BETA-3
Model
Code
Boiler
Autonomy
Power (KW)
Dimensions
Capacity
Pressure
hours
Boiler
Iron
Total
mm
BETA-3
2303852120
1,75 l.
2,6 bar
2รท3
1,00
0,83
1,83
230x420x300
BETA-3L4
2303852170
4,00 l.
2,6 bar
7รท8
1,40
0,83
2,23
230x420x300
Model
Code
Characteristics
Dimensions mm
CP-R
2303852140
Folding Ironing Table
with
Trolley support with 5 legs with wheels
420x300
Boiler
Folding ironing table with suction and boiler. Electrically warmed plate. Aspiration by means of pedal. Electrical heating. Temperature controlled by thermostat. Heated sleeve shape. Electrical steam generator with water feeding from an extractable deposit. Work table dimensions: 1,100 x 380 x 240 mm. Lower tray of canvas. Work pressure: 2.8 bar. Electrical connection: 230 V - 1+N+E
Model
Code
Boiler Capacity
MRP/AD
2303852160
1,2 l.
Power (KW)
Pressure Boiler 2,8 bar
2,00
Dimensions
Iron
Table Suction Total
0,80
0,70
0,13
3,70
mm 1.380x380x930
Professional Laundry
59
PROFESSIONAL LAUNDRY Comparison
among
Domestic, Semi-Industrial
and Industrial
Washer Extractors
8 kg Domestic Washer
8 kg Semi-Industrial Washer
10 kg Industrial Washer
Drum Volume /Load Relation
62 litres / 1:8
80 litres / 1:10
100 litres / 1:10
Electric Heating Power (KW)
1,8
4,8
6
Average Cycle Time (min)
90
60
50
Water Inlets
Cold
Cold+Hot
Cold+Hot+Soft Water (MP)
Average life of bearings (hours)
2.500
8.000
20.000
Bearings change option
NO
YES
YES
Automatic dossing option
NO
NO
YES
Programmable control option (MP)
NO
NO
YES
Self-Service option
NO
YES
YES
Pump
Pump
Gravity Drain / Pump (Opt)
Enamelled steel
Enamelled steel / St. steel
Stainless steel
Characteristic
Kind of drainage Body
Codes
for the
Electrical Connections
Mod.
and
Voltages
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
LA-8 M E
2351029200
ST
ST
ST
NO
NO
2351029206
NO
NO
LA-8 MA E
2351029210
ST
ST
ST
NO
NO
2351029216
NO
NO
LA-8 M E INOX
2351029220
ST
ST
ST
NO
NO
NO
NO
NO
LA-8 MA E INOX
2351029230
ST
ST
ST
NO
NO
NO
NO
NO
SR/E-8 220/50/1
2351029120
NO
NO
ST
NO
NO
2351029126
NO
NO
SR/E-8 400/50/3
2351029130
ST
ST
NO
NO
2351029135
NO
NO
NO
SR/E-8 A 230/50/1
2351029140
NO
NO
ST
NO
NO
2351029146
NO
NO
SR/E-8 A 400/50/3
2351029170
ST
ST
NO
NO
NO
NO
SR/E-8 INOX
2351029150
ST
ST
NO
NO
NO
NO
NO
NO
SR/E-8 A INOX
2351029160
ST
ST
NO
NO
NO
NO
NO
NO
CLS/E-8 M
2351029300
ST
ST
NO
NO
2351029305 2351029306
NO
NO
CLS/E-8 MA
2351029310
ST
ST
NO
NO
2351029315 2351029316
NO
NO
CLS/E-8 M INOX
2351029320
ST
ST
NO
NO
2351029325
NO
NO
NO
CLS/E-8 MA INOX
2351029330
ST
ST
NO
NO
2351029335
NO
NO
NO
PME-80 S
2304922000
ST
ST
ST
ST
ST
ST
NO
NO
PME-80 SP
2304922010
ST
ST
ST
ST
ST
ST
NO
NO
PE-18/100 S
2304922100
ST
ST
ST
ST
ST
ST
NO
NO
PE-18/120 S
2304922120
ST
ST
ST
ST
ST
ST
NO
NO
PSE-20/140 MP
2351324220
ST
ST
NO
ST
ST
NO
NO
NO
MRP/AD
2303852160
NO
NO
ST
NO
NO
ST
NO
NO
MPA
2303852110
NO
NO
ST
NO
NO
ST
NO
NO
BETA 3
2303852120
NO
NO
ST
NO
NO
ST
NO
NO
BETA 3-L4
2303852170
NO
NO
ST
NO
NO
ST
NO
NO
60
Professional Laundry
2351029175 2351029175
LAUNDRY FOR SELF-SERVICE
LAUNDRY FOR SELF-SERVICE
LAUNDRY FOR SELF-SERVICE Laundry for Self-Service from the Standard Version The basic model of self-service washer extractor ( -MA version ) is prepared to be connected to a payment central unit, with no need for any other installation or extra element. The self-service models with electronic wallet or for prepayment card are obtained by connecting one of the two kits for these two options to the basic self-service washer extractor model. This kit can easily be installed in the start up. When placing the order, the corresponding machine code and kit code shall be requested.
Various Payment Options -
PAYMENT CENTRAL UNIT: The machine, as delivered, can work with any payment central unit system
-
+ ELECTRONIC COIN / TOKEN METER KIT: It allows alternating between coins and tokens and it can be programmed for any coin.
-
+ PREPAYMENT CARD KIT: A payment system with a rechargeable card. It needs a central unit to recharge balances in the cards (manual, with cash, cards, etc...)
Model
Code
Description
Kit COIN METER
1300000203
Kit electronic coin meter
Kit PAYMENT CARD
1300000204
Kit payment card
Kit 100
2306001100
Kit 100 tokens for self-service
The “MA� Microprocessor for Self-Service Features: - - - - - - - - -
62
It is possible to configure a different price for each program. Cancellation of the advance keys, express program and extra rinse. Cancellation of the thermal stop. 4 special fast programs for self-service washer extractors (around 30 minutes). It is possible to define the desired programs between the 16 standard ones. It is possible to modify and cancel the times and the temperatures of each phase. Prepared for automatic dosage (4 signals). Configurable water levels +10% / -10% Counter down timer for self-service programs
Laundry for Self-Service
LAUNDRY FOR SELF-SERVICE Payment Systems from the Standard Version for Central Payment Unit
STANDARD CONTROL PANEL For Payment Central Unit
REMOVING THE ELEMENT FOR PAYMENT CENTRAL UNIT
PLACING THE KIT FOR “COIN / TOKEN METER”
CONTROL PANEL FOR “COIN / TOKEN METER”
PLACING THE KIT FOR “PREPAYMENT CARD KIT”
CONTROL PANEL FOR “PREPAYMENT CARD KIT”
Laundry for Self-Service
63
LAUNDRY FOR SELF-SERVICE Central Payment Units They are made to provide solutions to your particular needs :
- Security (thick sheeting, secure closure, mounted or insert in the wall with access by the back). - Reliability (soft and payment systems control). - Compatibility (compatible with machines and payment systems of tomorrow).
Machine driving by contact relay. Connecting on terminal blocks. Secure case. Thickness from 4 to 6 mm (depending on the version). User interface : machine start with anti vandal button with indicator light (one button by selection) or by pinpad. Machine interface : 4 x 0,75mm² cable (2 for machine start and 2 for the machine feed back signal). The payment units are compatible 100% with all the washers and the dryers of the current market. CLM E6AC CLM E6
Basic version accepting coins without giving change. Manages a maximum of 10 machines.
CLM E1018
CLM E6 Compact version with change giver. Manages a maximum of 10 machines. CLM E1018 Full version with change giver. Manages a maximum of 26 machines.
Model
Code
No. of No. of Case machines machines thickness in series maximum mm
Case type
Dimensions mm
Receiver
6
10
3
Surface mounted
380 x 300 x 350
CLM E6
5 tube change giver
6
10
3
Surface mounted or insert
380 x 300 x 750
CLM E1018
5 tube change giver
10
26
3
Surface mounted or insert
550 x 300 x 750
CLM E6AC
KIT EXTRA 4 KIT BILLETS 5 AND 10 â‚Ź
64
Coin payment
CLM E6AC
Laundry for Self-Service
1 KIT maximum for CLM E6 and CLM E6AC 4 KITs maximum for CLM E1018
SELF-SERVICE - WASHER EXTRACTORS High Speed Self-Service Washer Extractors Load factor: 1/10. Made of stainless steel. Basic model prepared to be connected to a payment central unit. Optional kits for coin token-meter and prepayment card. Microprocessor with display to control the washing process. 16 standard washing programs. Any of them can be selected as the standard one. Configurable water levels +/- 10%. It is possible to configure the times and temperatures of each phase, as well as to cancel them. Phase monitoring thanks to 8 LED indicators. 7-segment display with 4 digits. Up to 4 dosage signals. Safety switch for door opening. Motor with frequency variator incorporated. These machines have electronic control of imbalance that detects the load uncentered before spinning. No need to be fixed to the floor. Standard : 50 - 60 Hz. WRAS approved product. ETL certified product. Model
Code
Capacity
Drum
Kg (1:10) Ă˜ x Depth
(#)
Door
LA-18 MA + COINER
Spin speed
Power (*)
Dimensions
Ă˜
r.p.m.
G
KW
Volt
mm
LA-10 MA E
1312031103
10
532x425
290
1.000
300
6,75
MT
692x805x1.155
LA-10 MA AC
1312031104
10
532x425
290
1.000
300
0,75
MT
692x805x1.155
LA-13 MA E
1312032103
13
620x430
373
1.000
350
10,00
MT
788x870x1300
LA-13 MA AC
1312032104
13
620x430
373
1.000
350
1,00
MT
788x870x1300
LA-18 MA E
1312033103
18
700x470
373
950
350
14,20
MT
884x914x1.404
LA-18 MA AC
1312033104
18
700x470
373
950
350
2,20
MT
884x914x1.404
LA-25 MA E
1312034103
25
770x530
373
900
350
21,00
V
980x1.040x1.565
LA-25 MA AC
1312034104
25
770x530
373
900
350
9,00
V
980x1.040x1.565
Payment System When you order the washer extractor, you must order too the payment kit system, with the supplementary price. Model
Code
Description
Kit COIN METER
1300000203
Kit electronic coin meter
Kit PAYMENT CARD
1300000204
Kit payment card
Kit 100
2306001100
Kit 100 tokens for self-service
E :
Electrical heating Heated by heating elements
(*) : Standard Voltages for models 10 - 13 - 18 Kg : MT : Code for 230 V III & 400 V III +N+E (Tri-phase) & 230 V 1+N+E (Mono-phase)
AC :
Hot water Washing process with hot water from an external boiler.
V :
Heating systems for washer extractors 10 - 13 - 18 Kg
66
Laundry for Self-Service
Code for 400 V III +N+E ONLY (Optional, 230 V III+E)
SELF-SERVICE - WASHER EXTRACTORS Fast Speed Self-Service Washer Extractors
NOVEDAD
Load factor: 1/10. Made of stainless steel. MA: Microprocessor with display to control the washing process. Basic model prepared to be connected to a payment central unit. Optional kits for coin token-meter and prepayment card. 16 standard washing programs. Any of them can be selected as the standard one. Configurable water levels +/- 10%. It is possible to configure the times and temperatures of each phase, as well as to cancel them. Phase monitoring thanks to 8 LED indicators. 7-segment display with 4 digits. Up to 4 dosage signals. Possibility to install one automatic detergent doser on the rear of the machine. Detergent deposit with 4 compartments (pre-wash, wash, bleachers and softeners). Safety switch for door opening. Motor with frequency variator incorporated. These machines have electronic control of imbalance that detects the load uncentered before spinning.
G Factor = 200 Hard mounted machine. Machine must be fixed to the floor. Elements included. WRAS approved product. ETL certified product.
Model
Code
Capacity
LR-18 MA + COINER
Drum
Kg (1:10) Ă˜ x Depth
Door
Spin speed
Power (*)
Dimensions
Ă˜
r.p.m.
G
KW
Volt
mm
LR-10 MA E
1311031103
10
532x425
290
820
200
6,75
MT
692x805x1.155
LR-10 MA AC
1311031104
10
532x425
290
820
200
0,75
MT
692x805x1.155
LR-13 MA E
1311032103
13
620x430
373
760
200
10,00
MT
788x870x1.300
LR-13 MA AC
1311032104
13
620x430
373
760
200
1,00
MT
788x870x1.300
LR-18 MA E
1311033103
18
620x600
373
760
200
14,20
MT
788x1.080x1.300
LR-18 MA AC
1311033104
18
620x600
373
760
200
2,20
MT
788x1.080x1.300
LR-25 MA E
1311034103
25
700x680
373
715
200
21,00
V
884x1.150x1.404
LR-25 MA AC
1311034104
25
700x680
373
715
200
3,00
V
884x1.150x1.404
Base
to
Payment System
Be Fixed
The machines must be fixed to the floor. All the machines need one base to be fixed. The price of the base is included in the price of the machine. The codes to order the bases are in the right table
When you order the washer extractor, you must order too the payment kit system, with the supplementary price.
Code
Model
Code
Washer Extractor LR-10
1300000201
Kit COINER
1300000203
Washer Extractor LR-13
1300000202
Kit PAYMENT CARD
1300000204
Washer Extractor LR-18
1300000200
Kit 100 TOKENS
2306001100
Washer Extractor LR-25
1300000199
Base for Washer extractor
Laundry for Self-Service
67
SELF-SERVICE - TUMBLE DRYERS Stack Double Dryer Outer casing made of white-lacquered steel. Double column model, what allows a great use of the space: in the space of one machine it is possible to fit two of 14 kg. Two payment options: MA Version: Electronic wallet for self-service washer extractors that can be programmed for different coins and tokens. MPC Version: model prepared for the prepayment card and the payment central unit. It is very easy to change and adjust the price of the operations. MP programmer and the possibility to configure consecutive short programs depending on the inserted coins or tokens. Temperature and drying cycle time control. Temperature and time digital display. Cycle indicators. Axial air flow (less space required, great efficiency) Fluff compartment and filter in the central part. Lockable filter cap. Safety mike in case the door opens. Door with a useful Ă˜ of: 546 mm. Galvanized steel drum. Volume: 286 litres. Electrical connections and independent extractions for each machine.
Model (#)
SD/E-2x14 MCP
Code
Capacity
Drum
Kg
Ă˜ x Depth
2307286110 2 x 14 Kg
Heating
SD/G-2x14 MCP 2307286111 2 x 14 Kg
692 x 762
SD/E-2x14 MA
2307286120 2 x 14 Kg
692 x 762 ELEC 2x15 KW
SD/G-2x14 MA
2307286121 2 x 14 Kg
692 x 762
Heating systems
E :
Electrical heating Heated by heating elements
G :
Gas heating Heating system by gas burner with safety device and ignition system.
(#): Self - service system version:: MA:
model for token/coin meter kit
MCP:
model for prepayment card or payment central unit
Laundry for Self-Service
Dimensions
Total Electricity
692 x 762 ELEC 2x15 KW
(#):
68
Power (*)
GAS 2x20 KW G
GAS 2x20 KW G
2x15,25 KW
T
2x0,25 KW MT 2x15,25 KW
T
2x0,25 KW MT
mm 756x1.114x1.988 756x1.114x1.988 800x1.089x1.937 756x1.114x1.988
(*) : Standard Voltages T: Code for 230 V III & 400 V III +N+E (Tri-phase) MT :
Code for 230 V III & 400 V III +N+E (Tri-phase) & 230 V 1+N+E (Mono-phase)
SELF-SERVICE - TUMBLE DRYERS Tumble Dryers White, «skin plate» steel outer casing. Drum in stainless steel. Electronic coin / token meter incorporated. Electronic microprocessor with 10 standard programs and one program to be modifed by the user. Control of the temperature and dry time. Final cooling cycle. Display for temperature and time. Anti-wrinkles system. Reversing system of the drum. Motor with integrated variator of frequency. Safety switch for opening door. Ø door: 574 mm. Fluff filter in lower part. Standard voltages : 50 - 60 Hz.
Model
Code
(#)
Capacity (Kg) (1:20)
(1:25)
Drum Ø x Depth
Power (*) Heating
Total Electric
SR/E-10 A
1500011130
10,5
8,4
750x475
ELEC
12,0 KW 12,40 KW
SR/G-10 A
1500011131
10,5
8,4
750x475
GAS
20,5 KW
SR/E-13 A
1500012130
16,5
13,2
750x746
ELEC
18,0 KW 18,40 KW
SR/G-13 A
1500012131
16,5
13,2
750x746
GAS
20,5 KW
SR/E-23 A
1500013130 28,75
23
855x905
ELEC
30,0 KW 30,80 KW
SR/G-23 A
1500013131 28,75
23
855x905
GAS
30,0 KW
(#):
Heating systems
E :
Electrical heating Heated by heating elements
G :
Gas heating Heating system by gas burner with safety device and ignition system.
Dimensions
0,40 KW
0,40 KW
0,85 KW
mm
T
785x857x1.665
MT
785x857x1.665
T
785x1.127x1.665
MT
785x1.127x1.665
V
890x1.330x1.781
MT
890x1.330x1.781
(*) : Standard Voltages for models 10 - 13 - 18 Kg : T: Code for 230 V III & 400 V III +N+E (Tri-phase) V:
Code for 400 V III +N+E (Tri-phase) ONLY (Optional, 230 V III+E)
MT :
Code for 230 V III & 400 V III +N+E (Tri-phase) & 230 V 1+N+E (Single-phase)
Model
Code
Description
Kit 100
2306001100
Kit 100 tokens for self-service
Laundry for Self-Service
69
SELF-SERVICE - PROFESSIONAL MACHINES Professional Washer Extractor Model for self-service, with electronic coin / token meter incorporated. See supplementary codes in the next page Stainless steel wash basket and outer tub. Four shock absorbers. Capacity: 8 kg. Electronic programmable controls. Cycles: Normal, Permanent press or delicate. Water temperatures: 30 ºC - 40 ºC - 60 ºC - 90 ºC Permanent press / 60 ºC - Delicate / 30 ºC. Cycle time: 31 - 35 minutes. Basket volume: 80 litres. Door diameter: Ø 270 mm. Spin speed: 500 - 650 - 1,000 rpm. G factor: 300. Motor with variable speed induction, 750 W (3/4 HP) and thermal protection. Heating element: 4,8 KW. Maximum power: 5.5 KW. Electrical connection: 400 V - 3+N+E / 230 V - 3+E 230 V - 1+N+E Model
Code
LA-8 MA E
Outer
Capacity
Door
casing
Kg (1:10)
LA-8 MA E INOX
Spin speed
Power (*)
Dimensions
Ø
r.p.m.
G
KW
Volt
mm
LA-8 MA E
2351029210
White
8
270
1000
300
5,50
MT
683x711x1.092
LA-8 MA E INOX
2351029230
St. Steel
8
270
1000
300
5,50
MT
683x711x1.092
(*) Electrical connection : MT : Code for 230 V III & 400 V III +N+E and 230 V 1+N+E
Professional Tumble Dryer Model for self-service, with electronic coin / token meter incorporated. See supplementary codes in the next page Capacity: 8 Kg. Electronic programmable controls. Safety door switch. Drum: Ø 660 mm, depth 580 mm. Drum volume: 198 litres. Start button. 4 programs. Program for cold drying. Timer and final cooling cycle. Fluff filter in lower part. Heating system: electric. Heating power: 4.8 KW. Dimensions: 683 x 711 x 1,080 mm
Model
(*) M : T:
70
Code
SR/E-8 A INOX
Outer
Capacity (Kg)
Door
Power
Dimensions
casing
(1:20)
(1:25)
Ø x Depth
KW
Volt.
mm
SR/E-8 A
2351029140
White
8
6,4
660x580
5,40
M
683x711x1.080
SR/E-8 A INOX
2351029160
St. Steel
8
6,4
660x580
5,40
T
683x711x1.080
Electrical connection: 230 V - 1+N+E 400 V - 3+N+E / 230 V - 3+E
Laundry for Self-Service
SELF-SERVICE - PROFESSIONAL MACHINES Stack Washer / Dryer Stacking unit «washer & dryer» for Self-Service CLS/E-8 M (outer casing in white varnished steel ) CLS/E-8 M INOX (outer casing made of stainless steel) With electronic coin / token meter incorporated. See supplementary codes in this page. Connection: 230 V - III+E // 400 V - III+N+E . Dimensions of the stacking assembly: 683 x 711 x 1,950 mm WASHER EXTRACTOR Stainless steel wash basket and outer tub. Four shock absorbers. Capacity: 8 kg. Electronic programmable controls. Cycles: Normal, Permanent press or delicate. Water temperatures: 30 ºC - 40 ºC - 60 ºC - 90 ºC Permanent press / 60 ºC - Delicate / 30 ºC. Cycle time: 31 - 35 minutes. Basket volume: 80 litres. Spin speed: 500 - 650 - 1,000 rpm. G factor: 300. Motor with variable speed induction, 750 W (3/4 HP) and thermal protection. Heating element: 4.8 KW. - Maximum power: 5.5 KW. TUMBLE DRYER Capacity: 8 Kg. Electronic programmable controls. Safety door switch. Drum: Ø 660 mm, depth 580 mm. Drum volume: 198 litres. Heating system: electric. Heating power: 4.8 KW.
Model
Code
Description
Dimensions mm
CLS/E-8 MA
2351029310
Stacking unit LA-8 MA E + SR/E-8 A
683x711x1.950
CLS/E-8 MA INOX
2351029330
Stacking unit LA-8 MA E + SR/E-8 A
683x711x1.950
Washer Extractor
and
Dryer
for
Self-Service
SUPPLEMENTARY ELEMENTS
Kit
When machines for self-service are requested, in the order should be indicated the code of the machine and the codes for the coin meter and the coin box. The quantities to order are indicated in the enclosed table.
Code
Quantity by machine LA-8 MA E
SR/E-8 A
CLS/E-8 MA
Coin meter
2351029351
1
1
2
Coin box
2351029352
1
1
2
The prices of the kits are included in the price of the self-service machine.
Model
Code
Description
Kit 100 TOKENS
2306001100
Kit 100 tokens for self-service
Laundry for Self-Service
71
LAUNDRY FOR SELF-SERVICE Codes
for the
Mod.
Electrical Connections
and
Voltages
Ref . / Cod.
400 III+N+T
230 III+T
230 I+N+T
400 III+N+T
230 III+T
230 I+N+T
440 III
110 I+T
ST
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
LA-10 MA E
1312031103
ST
ST
ST
ST
ST
ST
NO
NO
LA-10 MA AC
1312031104
ST
ST
ST
ST
ST
ST
NO
NO
LA-13 MA E
1312032103
ST
ST
NO
ST
ST
NO
NO
NO
LA-13 MA AC
1312032104
ST
ST
ST
ST
ST
ST
NO
NO
LA-18 MA E
1312033103
ST
ST
NO
ST
ST
NO
NO
NO
LA-18 MA AC
1312033104
ST
ST
ST
ST
ST
ST
NO
NO
LR-10 MA E
1311031103
ST
ST
ST
ST
ST
ST
NO
NO
LR-10 MA AC
1311031104
NO
NO
ST
NO
NO
ST
NO
NO
LR-13 MA E
1311032103
ST
ST
NO
ST
ST
NO
NO
NO
LR-13 MA AC
1311032104
NO
NO
ST
NO
NO
ST
NO
NO
LR-18 MA E
1311033103
ST
ST
NO
ST
ST
NO
NO
NO
LR-18 MA AC
1311033104
NO
NO
ST
NO
NO
ST
NO
NO
LR-25 MA E
1311034103
ST
ST
NO
ST
ST
NO
NO
NO
LR-25 MA AC
1311034104
NO
NO
ST
NO
NO
ST
NO
NO
SR/E-10 A
1500011130
ST
ST
NO
ST
ST
NO
NO
NO
SR/G-10 A
1500011131
ST
ST
1500011132
ST
ST
1500011133
NO
NO
SR/E-13 A
1500012130
ST
ST
NO
ST
ST
NO
NO
NO
SR/G-13 A
1500012131
ST
ST
1500012132
ST
ST
1500012133
NO
NO
SR/E-23 A
1500013130
ST
ST
NO
ST
ST
NO
NO
NO
SR/G-23 A
1500013131
ST
ST
1500013132
ST
ST
1500013133
NO
NO
SD/E-2x14 MCP
2307286110
ST
ST
NO
NO
NO
NO
NO
NO
SD/G-2x14 MCP
2307286111
ST
ST
NO
NO
NO
NO
NO
NO
SD/E-2x14 MA
2307286120
ST
ST
NO
NO
NO
NO
NO
NO
SD/G-2x14 MA
2307286121
ST
ST
NO
NO
NO
NO
NO
NO
LA-8 MA E
2351029210
ST
ST
ST
NO
NO
2351029216
NO
NO
LA-8 MA E INOX
2351029230
ST
ST
ST
NO
NO
NO
NO
NO
SR/E-8 A 230/50/1
2351029140
NO
NO
ST
NO
NO
2351029146
NO
NO
SR/E-8 A 400/50/3
2351029170
ST
ST
NO
NO
NO
NO
SR/E-8 A INOX
2351029160
ST
ST
NO
NO
NO
NO
NO
CLS/E-8 MA
2351029310
ST
ST
NO
NO
2351029315 2351029316
NO
NO
CLS/E-8 MA INOX
2351029330
ST
ST
NO
NO
2351029335
NO
NO
72
Laundry for Self-Service
2351029175 2351029175 NO
NO
APPENDIX
APPENDIX
CALCULATION FOR A LAUNDRY
Establishment
Total weight (g.)
Factor of change
Weight per day (g.)
Type of cloth
1/2 1/2 1 1 1 1 1
650 75 550 200 50 200 175
Drapery Drapery Plush Plush Plush Drapery Plush
1/3,5 1 1
40 50 75
Drapery Drapery Drapery
Drapery Drapery Plush Drapery Drapery Drapery Plush Drapery Plush Plush Form Drapery
Hotels
Items per person per room 2 1 1 1 1 1 1
sheets of 650 gr pillow cover bath towel medium towel little towel fine towel bathmat
1.300 150 550 200 50 200 175
Restaurants
Service per person 1/4 tablecloth of 560 gr 1/4 tablecloth cover of 200 gr 1 table napkin of 75 gr
140 50 75
Hospitals
Patients 2 1 1 1 2 1 1 1 1 1 1 1
sheets of 650 gr pillow cover bolster bedspread cradle sheets of 350 gr . cradle pillow cover cradle bolster cradle bedspread bathtowel towel pyjamas kit of nappies
1.300 150 800 1.000 700 100 400 400 550 200 700 300
1 1 1 1/7 1 1 1 1/7 1/2 1/2 1/7 1
1.300 150 800 143 700 100 400 57 275 100 100 300
400 400 400 30
1 1/7 1/7 1/7
400 57 57 57
Form Form Form Form
1/7 1/7 1/30 1/15 1/3,5 1/7 1 1 1 1/7
185 21 33 87 29 87 100 150 100 26
Drapery Drapery Drapery Form Plush Form Form Form Form Form
Sanitary staff
Surgical dress White coat Other dress Cap Military barracks
Items per person 2 1 1 1 1 2 1 1 1 1
74
sheets of 650 gr pillow cover bedspread Fatigue clothes towel shirts of 300 gr. pair of socks T-shirt underpants short
1.300 150 1.000 1.300 200 600 100 150 100 180
CALCULATION FOR A LAUNDRY
To obtain the average production in a laundry, this is the formule to apply: N x M x D x K P = xR 100 x H
P N M D K H R
Average production (Kg/h) Number of people Occupation percentage Days of service Kg of clothe per people and day Working hours by week Corrective coefficient
The estimate values for K coefficient (Kg / people - day) are obtained from this table: K value
Type of establishment -
Hotel Hotel Hotel Hotel Hotel Hotel Hotel Hotel Hotel Hotel
* ** *** **** ***** * ** *** **** *****
Town Town Town Town Town Coast Coast Coast Coast Coast
1,0 1,2 1,5 2,5 3,0 1,0 1,2 1,5 2,5 3,0
Type of establishment
kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day
-
Hostal 1,0 Restaurant low category 0,7 Restaurant medium category 1,0 Restaurant high category 1,2 Schools and colleges 1,0 Hospitals, clinic centers 6,0 Psychiatric centers 2,5 Military barracks 1,5 Residences 2,5 Residences high category 4,0 Spa 1,2
K value kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day kg/people-day
The estimate values for R corrective coefficient are obtained from this table:
Type of establishment
R value
- Hospitals, clinical centers - All the rest
R = 1,3 R = 1,15
TYPES OF CLOTHES If the distribution of clothes is unknow, we can apply the estimate values for the percentaje of type of clothes in the establishmenst from this table:
Clothes Type of establishment Drapery Plush Form -
Hotel Town 50 % Hotel Coast 45 % Hostal 60 % Restaurant low category 90 % Restaurant medium category 90 % Restaurant high category 80 % Schools and colleges 30 % Hospitals, clinic centers 65 % Psychiatric centers 40 % Military barracks 20 % Residences 35 % Residences high category 45 % Spa
40 45 40 10 10 10 20 20 20 10 40 40 90
% % % % % % % % % % % % %
10 % 10 %
10 50 15 40 70 25 15 10
% % % % % % % %
75
DIAGRAM OF A LAUNDRY
S:
Surface (m2) m2 area = Kg/h clothes
ENTRANCE OF DIRTY CLOTHES
0,15 x S
STORAGE OF DIRTY CLOTHES
CLASSIFICATION AND SOAKING
Drapery
WASHING AND CENTRIFUGED
Form clothes
0,70 x S
Plush, towelling DRYING
DRYING
DRYING IRONING IRONING
IRONING
PLEATING
PLEATING
0,15 x S
MENDING
EXIT OF CLEAN CLOTHES
76
DRYING
STORAGE OF CLEAN CLOTHES
PLEATING
CONVERSION FACTORS
Length and Surface Unit
x
cm mm inch inch m foot m yard dm2 inch3
Factor
Unit
0.3937 0.0394 2.54 25.4 3.2808 0.3048 1.0936 0.9144 15.5 0.0645
inch inch cm mm foot m yard m inch3 dm2
Volume Unit
Weight Unit
x
lb gr pound Kg
Factor 453.6 1/453.6 0.4536 2.2045
Unit gr pound Kg pound
x
gallon litre m3 foot3 inch3 cm3 litre inch3
Factor
Unit
3.785 0.2642 35.31 0.0283 16.39 0.061 61 0.0164
litre gallon foot3 m3 cm3 inch3 inch3 litre
Temperature ºC = (5/9) x (ºF - 32) ºF = (9/5) x ºC +32 ºK = 273 ºC Thermia
1000
Kcal Power and Energy Unit
Pressure Unit
x
Kg/cm2 lb/inch2 Kg/cm2 bar Pa bar
Factor
Unit
14.22 0.07 0.9807 1.020 10 -5 10 5
lb/inch2 Kg/cm2 bar Kg/cm2 bar Pa
x
Factor
Unit
Kcal/h KW Kcal/h BTU cal J Kcal
1/860 860 4 0.25 4.186 0.2389 1000
KW Kcal/h BTU Kcal/h J cal cal
Th KW H.P. KW C.V.
1000 1.3406 0.746 1.36 0.7357
Kcal H.P. KW C.V. KW
77
TERMS AND CONDITIONS OF SALE
1- PRICES All prices included in our invoices are in euro, net ex works. Prices exclude delivery, unloading, positioning or installation. 2- TRANSPORT Goods are freighted under buyer’s responsibility . Delivery is free on truck: unloading not included. Complains: goods are freighted under insurance coverage. It is clients’ task to check goods for damages upon delivery. Complains not related to transportation must be sent within 5 days from goods reception. Besides above mentioned cases, goods received with signature on shipping bulletin are accepted henceforth. 3- PACKING Standard packing is included in the present prices. Other packing will be quoted separately. 4- GUARANTEE We warranty all our products against manufacturer fault during one Year from manufacturer or expedition date. The faulty parts will be replaced with an ex-works delivery. We shall not obliged to replace any goods or make any allowance or other arrangement if the defect has arisen from accident, misuse, neglect, incorrect installation, or any other cause beyond our control. Where the defect is reasonably attributable to the fault of the manufacturer, the Manufacturer shall replace or repair the defective goods but shall not be liable for any cost of removal of the defective goods, or of the installation of replacement or any consequential loss or damage arisen there from . The manufacturer´s liability shall be limited to the repair or replacement of materials and components manufactured by us. Where goods and components supplied by us are not of our´s design and manufacture, the liability shall be limited to the guarantee provided by the manufacture of such goods and components. 5- PUBLICATIONS Right of new developments and technical modifications reserved. Prices and article numbers subject to change without notice. This price list supersedes all earlier list. 6- DELAY Time for performance by the Manufacturer is given in good faith , as accurately as possible , but is not to be the essence of the contract. The Customer shall have not right to damages or to impose penalties in the event of late delivery by the Manufacturer or his clients, or to cancel the order or the contract for delay from any causes unless agreed in writing by the Manufacturer. Delivery terms are merely indicative and subject to FAGOR production times. Delays do not entitle to any refund or liability whatsoever.
78
Conditions
TERMS AND CONDITIONS OF SALE
7- CANCELLATION AND RESTOCKING The Manufacturer at its absolute discretion may agree to the return of goods by the customer provided that the goods are returned at the customer expense, in the same condition and in the original packing. Any goods agreed by the Manufacturer as acceptable for return for any reason, excluding faulty goods, will be subject to a restocking charge of 25 % of the net invoice value. 7-1.
Orders can not be cancelled if the have been confirmed and accepted in writing , specially tailor made equipment.
We’ll consider any order confirmed if we don’t receive any negative reaction in 24 hours from our
Confirmation date.
7-2. -
Fagor Industrial will only accepted any cancellation as follow : If the dealer´s cancel is before goods have left our warehouse a 25.00 € charge , net , per item will be made to cover our administra-
tion and logistics cost. -
If the dealer´s cancel is after goods have left our warehouse , a charge of 10 % of invoice value will be charge plus an abortive delivery
charge if it is necessary . -
If the goods had been unpacked , a minimum of 15 % of invoice value will be charge only for this concept.
8- PAYMENTS The payments will be made on time, even if the transport, the setting in service or the reception of the installation are delayed or canceled by reasons that are not attributable to us.
9- ARBITRATION The Parties should try to settle any disputes and differences which can arise by negotiations . If the parties will not come to agreement, the arisen dispute will be submitted for consideration to a neutral Court as it is The International Commercial Arbitration court of Paris, the arbitrator would also know and speak English and Spanish.
Conditions
79