Dunlop Garage Equipment Product Guide by GEMCO

PRODUCT GUIDE

PRODUCT GUIDE TYRE EQUIPMENT

DTM810 DTM190 DTM185HD DTM285HD DTM285HDTIS DTM588/590 DWB920 DWB953 DWB960C DWB968C DWB953CV TYRE EQUIPMENT ACCESSORIES

VEHICLE LIFTS DL240 DL240B DL435/WA DL445/WA DL455/WA DSL3 DTSL3 DSL45WA DML1 DMCP75 JACKING BEAMS

JACKS DBJP DTRJP DASP DTJ

WHEEL ALIGNMENT AGO40/40L AGO75/80 DCAP200

GAS&AIR DACP200 DAC DNGEN01

WORKSHOP FURNITURE PROWORKSTATION1 PROWORKSTATION2

TYRE EQUIPMENT VEHICLE LIFTS JACKS WHEEL ALIGNMENT GAS & AIR WORKSHOP FURNITURE

DTM810 //Semi Automatic Tyre Machine DTM810 The Dunlop DTM810 Tyre Machine is a semi automatic tyre machine which features a compact swing arm design.

Demount shaft release/lock 36mm demount shaft Swing arm Clamping capacity outside/rim diameter 11” - 22”

Tyre inflator

Clamping capacity inside diameter 13” - 24” Demount head

Maximum wheel diameter 960mm (including tyre) Turntable

Tool tray

Soap bucket

Tyre lever

Bead breaker blade Foot pedals

TECHNICAL SPECIFICATION Clamping capacity (outside/rim diameter)

11” - 22”

Clamping capacity (inside diameter)

13” - 24”

Assist arm

Not available

Rim width

3” - 12”

Accessories included

Tyre lever, soap bucket, plastic jaw protectors and plastic inserts (demount head)

Maximum wheel diameter (including tyre)

960mm

RPM Operating pressure

7RPM

Nett weight of machine (excluding packaging)

190kg

8 - 10 BAR

Gross weight of machine (including packaging)

230kg

Air required

Yes

Machine dimensions (Width x Depth x Height)

1200mm x 1150mm x 2000mm

Bead breaker force

2,500kg

Packaged dimensions (Length x Width x Height)

1200mm x 910mm x 1050mm

Maximum Noise level

70DB

Electrical supply

220/240 Volt (1 Phase)

We recommend that machines are hard wired to an electrical supply with a 20A Type C circuit breaker

Size of demount shaft

36mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DTM190 //Semi Semi Automatic AutomaticTyre TyreMachine Machine DTM190 The Dunlop DTM190 Tyre Machine is a semi automatic tyre machine which features a compact swing arm design.

Demount shaft release/lock 41mm demount shaft Swing arm

Clamping capacity outside/rim diameter 11” - 22”

Tyre inflator Clamping capacity inside diameter 13” - 24”

Demount head

Maximum wheel diameter 1250mm (including tyre) Turntable

Tool tray

Soap bucket

Tyre lever

Bead breaker blade Foot pedals

TECHNICAL SPECIFICATION Clamping capacity (outside/rim diameter)

11” - 22”

Clamping capacity (inside diameter)

13” - 24”

Assist arm

Not available

Rim width

3” - 15”

Accessories included

Tyre lever, soap bucket, plastic jaw protectors and plastic inserts (demount head)

Maximum wheel diameter (including tyre)

1250mm

RPM Operating pressure

7RPM

Nett weight of machine (excluding packaging)

230kg

8 - 10 BAR

Gross weight of machine (including packaging)

270kg

Air required

Yes

Machine dimensions (Width x Depth x Height)

1200mm x 1150mm x 2000mm

Bead breaker force

2,500kg

Packaged dimensions (Length x Width x Height)

1200mm x 910mm x 1050mm

Maximum Noise level

70DB

Electrical supply

220/240 Volt (1 Phase)

We recommend that machines are hard wired to an electrical supply with a 20A Type C circuit breaker

Size of demount shaft

41mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DTM185HD / 185HDTI Fully Automatic TyreTyre Machine DTM185HD/185HDTI /Fully Automatic Machines The Dunlop DTM185HD Tyre Machine is a fully automatic tyre machine which as standard features an alloy protection cover for the turntable. A tubeless inflation model (DTM185HDTI) is also available. These machines can be fitted with an assist arm to aid the user when changing low profile and run flat tyres ((ART320 optional extra).

41mm demount shaft Clamping capacity outside/rim diameter 11” - 22”

55mm slider arm

ART320 Assist arm (optional extra)

Demount shaft release/lock button

Clamping capacity inside diameter 13” - 24”

Demount head with plastic inserts

Tyre inflator Maximum wheel diameter 1040mm (including tyre)

Turntable with plastic protection

Soap bucket

Bead breaker blade Foot pedals

TECHNICAL SPECIFICATION Clamping capacity (outside/rim diameter)

11” - 22”

Clamping capacity (inside diameter)

13” - 24”

Rim width

3” - 13”

Maximum wheel diameter (including tyre)

1040mm

Assist arm

Yes - Optional extra ART320

Accessories included

Tyre lever, soap bucket, plastic jaw protectors, plastic inserts (demount head) and alloy protection kit (turntable)

RPM

7RPM

Nett weight of machine (excluding packaging)

218kg (DTM185HD) / 240kg (DTM185HDTI)

Operating pressure

8 - 10 BAR

Gross weight of machine (including packaging)

265kg (DTM185HD) / 290kg (DTM185HDTI)

Machine dimensions (Width x Depth x Height)

1500mm x 1700mm x 2000mm (includes tilt/arm)

Packaged dimensions (Length x Width x Height)

1130mm x 950mm x 1010mm (DTM185HD) 1100mm x 920mm x 1050mm (DTM185HDTI)

Air required

Yes

Bead breaker force

2,500kg

Maximum Noise level

70DB

Electrical supply

220/240 Volt (1 Phase)

Size of demount shaft

41mm

We recommend that machines are hard wired to an electrical supply with a 20A Type C circuit breaker

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DTM285HD FullyAutomatic AutomaticTyre TyreMachine Machine DTM285HD//Heavy Heavy Duty Fully The Dunlop DTM285HD Fully Automatic Tyre Machine is designed for high usage and features a dual speed turntable and an alloy protection cover for the turntable. This machine can be fitted with an assist arm to aid the user when changing low profile and run flat tyres (ART390 optional extra).

ART390 Assist arm (optional extra)

41mm Demount shaft Clamping capacity outside/rim diameter 12” - 27”

55mm slider arm

Clamping capacity inside diameter 13” - 28”

Tyre inflator Demount head

Maximum wheel diameter 1040mm (including tyre)

Adjustable clamping jaws

Turntable (two speed) with plastic protection cover Soap bucket

Bead breaker blade

Foot pedals

TECHNICAL SPECIFICATION Clamping capacity (outside/rim diameter)

12” - 27”

Clamping capacity (inside diameter)

13” - 28”

Assist arm

Yes - Optional extra ART390

Rim width

3” - 13”

Accessories included

Tyre lever, soap bucket, alloy protection kit (turntable) and dual speed turntable

Maximum wheel diameter (including tyre)

1040mm

RPM Operating pressure

7RPM/13RPM

Nett weight of machine (excluding packaging)

260kg

8 - 10 BAR

Gross weight of machine (including packaging)

Air required

Yes

300kg

Bead breaker force

2,800kg

Machine dimensions (Width x Depth x Height)

1500mm x 1700mm x 2100mm (includes tilt/arm)

Maximum Noise level

70DB

Electrical supply

380/415 Volt (3 Phase)

Packaged dimensions (Length x Width x Height)

1100mm x 860mm x 980mm

Size of demount shaft

41mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DTM285HDTIS /Leverless Heavy Duty Fully Automatic Tyre Machine The Dunlop DTM285HDTIS Leverless Fully Automatic Tyre Machine is designed for high usage and features a unique pneumatically operated demount claw, tubeless inflation, dual speed turntable and an alloy protection cover for the turntable. This machine can be fitted with an assist arm to aid the user when changing low profile and run flat tyres (ART390 optional extra). 41mm Demount shaft Clamping capacity outside/rim diameter 12” - 27”

55mm slider arm

ART390 Assist arm (optional extra)

Clamping capacity inside diameter 13” - 28”

Maximum wheel diameter 1040mm (including tyre)

Demount head with leverless operation

Adjustable clamping jaws

Turntable (two speed) with plastic protection cover Soap bucket

Tubeless inflation

Bead breaker blade

Foot pedal for inflation

Foot pedals

TECHNICAL SPECIFICATION Clamping capacity (outside/rim diameter)

12” - 27”

Clamping capacity (inside diameter)

13” - 28”

Assist arm

Yes - Optional extra ART390

Rim width

3” - 13”

Accessories included

Tyre lever, soap bucket, alloy protection kit (turntable), dual speed turntable, leverless demounting claw and tubeless inflator

Maximum wheel diameter (including tyre)

1040mm

RPM Operating pressure

7RPM/13RPM

Nett weight of machine (excluding packaging)

260kg

8 - 10 BAR

Gross weight of machine (including packaging)

Air required

Yes

300kg

Bead breaker force

2,800kg

Machine dimensions (Width x Depth x Height)

1500mm x 1700mm x 2100mm (includes tilt/arm)

Maximum Noise level

70DB

Electrical supply

380/415 Volt (3 Phase)

Packaged dimensions (Length x Width x Height)

1400mm x 1020mm x 1160mm

Size of demount shaft

41mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DTM588/590 /Heavy Duty Fully Automatic Tyre Machine The Dunlop range of DTM commercial vehicle tyre machines consists of two models - the DTM588 and the DTM590.

Hydraulic pump Outside rim clamping capacity 10” - 20”

Inside rim clamping capacity DTM588: 14” - 26” / DTM590: 14” - 42”

Clamping jaws

Bead breaker

Operating joystick

Maximum wheel diameter (including tyre) DTM588: 1500mm / DTM590: 2300mm

Demount head Tyre positioning device 3 phase motor

Foot pedals

TECHNICAL SPECIFICATION Clamping capacity (inside)

DTM588

DTM590

14” - 26”

14” - 56”

Maximum wheel width (including tyre)

760mm

1100mm

Maximum wheel diameter (including tyre)

1500mm

2300mm

Operating pressure (hydraulic)

130 - 150 BAR

Maximum Noise level

75DB

Air required

Yes

Electrical supply

380/415 Volt (3 Phase)

Accessories included

Industrial tyre lever and tubeless rim clamping tool

Nett weight of machine (excluding packaging)

597kg

987kg 1252kg

Gross weight of machine (including packaging)

775kg

Machine dimensions (Width x Depth x Height)

2180mm x 2100mm x 1200mm

2250mm x 2050mm x 1600mm

Packaged dimensions (Length x Width x Height)

2100mm x 1650mm x 930mm

2280mm x 2070mm x 1070mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DWB920 /Electronic Wheel Balancer The Dunlop DWB920 wheel balancer is an easy to use electronic machine which is fully motorised and features an integral display unit with key pad.

Protective hood Rim diameter 10” - 24”

Maximum wheel weight 65kg Display panel

Input panel and balancing programme selection panel

Measuring arm

Maximum wheel diameter 1100mm (including tyre)

Tool tray

36mm balancing shaft

Measuring caliper

On/off power

TECHNICAL SPECIFICATION Rim diameter

10” - 24”

Maximum wheel weight

65kg

Maximum wheel diameter (including tyre)

1100mm

Balancing accuracy

+/- 1 gram

RPM

200 RPM

Electrical supply

220/240 Volt (1 Phase)

Maximum Noise level

70DB

Balancing shaft

36mm

Accessories included

Rim width measuring caliper, wheel weight pliers with hammer, quick release wheel clamping nut and four balancing cones

Nett weight of machine (excluding packaging)

103kg

Gross weight of machine (including packaging)

136kg

Machine dimensions (Width x Depth x Height)

1300mm x 1100mm x 1750mm (includes hood)

Packaged dimensions (Length x Width x Height)

1010mm x 710mm x 1150mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DWB953 /Electronic Wheel Balancer The Dunlop DWB953 wheel balancer is an easy to use electronic machine which is fully motorised and features a pedestal mounted display with integral key pad.

Protective hood

Rim diameter 10” - 24”

Display panel

Maximum wheel weight 65kg Input panel Balancing programme selection panel Maximum wheel diameter 1100mm (including tyre)

Tool tray

36mm balancing shaft

Measuring arm Standard balancing cones

Measuring caliper

TECHNICAL SPECIFICATION Rim diameter

10” - 24”

Maximum wheel weight

65kg

Maximum wheel diameter (including tyre)

1100mm

Balancing accuracy

+/- 1 gram

RPM

200 RPM

Electrical supply

220/240 Volt (1 Phase)

Maximum Noise level

70DB

Balancing shaft

36mm

Accessories included

Rim width measuring caliper, wheel weight pliers with hammer, quick release wheel clamping nut and four balancing cones

Nett weight of machine (excluding packaging)

124kg

Gross weight of machine (including packaging)

157kg

Machine dimensions (Width x Depth x Height)

1300mm x 1050mm x 1830mm (includes hood)

Packaged dimensions (Length x Width x Height)

1050mm x 710mm x 1150mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DWB960C /Electronic Wheel Balancer The Dunlop DWB960C wheel balancer is an electronic, computerised machine which is fully motorised and features advanced programme options for the user including hidden/split weight function and wheel optimisation. Programme selection Protective hood 15” TFT Color

Rim diameter 10” - 24”

Keypad for operation

Maximum wheel weight 65kg

Maximum wheel diameter 1100mm (including tyre)

36mm balancing shaft Automatic measuring arm Standard cones

Foot brake

TECHNICAL SPECIFICATION Rim diameter

10” - 24”

Maximum wheel weight

65kg

Maximum wheel diameter (including tyre)

1100mm

Balancing accuracy

+/- 1 gram

RPM

200 RPM

Electrical supply

220/240 Volt (1 Phase)

Maximum Noise level

70DB

Balancing shaft

36mm

Accessories included

Rim width measuring caliper, wheel weight pliers with hammer, quick release wheel clamping nut, four balancing cones

Nett weight of machine (excluding packaging)

124kg

Gross weight of machine (including packaging)

157kg

Machine dimensions (Width x Depth x Height)

1250mm x 800mm x 1600mm

Packaged dimensions (Length x Width x Height)

980mm x 760mm x 1250mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DWB968C /Computerised Wheel Balancer The DunlopDWB968C computerised wheel balancer is fully motorised and features advanced programme options for the user including hidden/split weight function and wheel optimisation. A third arm is supplied as standard with the machine and automatically measures the rim width.

Programme selection with 5 ALU, OPT function, DYN and STA

Rim diameter 10” - 25”

LCD monitor Protective hood

Maximum wheel weight 75kg 40mm balancing shaft

Automatic measuring arm with laser

Maximum wheel diameter 1200mm (including tyre)

Foot brake

TECHNICAL SPECIFICATION Rim diameter

10” - 25”

Rim width

1.5” - 20”

Maximum wheel weight

75kg

Maximum wheel diameter (including tyre)

1100mm

Balancing accuracy

1 gramme

RPM

200 RPM

Electrical supply

220/240 Volt (1 Phase)

Maximum Noise level

70DB

Balancing shaft

40mm

Accessories included

Rim width measuring caliper, wheel weight pliers with hammer, quick release wheel clamping nut, three balancing cones

Nett weight of machine (excluding packaging)

163kg

Gross weight of machine (including packaging)

200kg

Machine dimensions (Width x Depth x Height)

1450mm x 940mm x 1750mm

Packaged dimensions (Width x Depth x Height)

1060mm x 960mm x 1180mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. 01604 828 557

DWB953CV /Electronic Wheel Balancer for cars, vans and trucks The Dunlop DWB953CV wheel balancer is an electronic car and commercial vehicle wheel balancer which is fully motorised and features a pedestal mounted display with key pad. Suitable for both car and commercials with an air operated tyre lifter.

Rim diameter 10” - 24”

Protective hood Balancing programme selection panel

Display panel

Maximum wheel weight 150kg Tool tray

Measuring arm

Maximum wheel diameter 1100mm (including tyre)

42mm balancing shaft

Tyre lifter Foot brake Balancing cones

TECHNICAL SPECIFICATION Rim diameter

10” - 24”

Maximum wheel weight

150kg

Maximum wheel diameter (including tyre)

1100mm

Wheel width

20”

Balancing accuracy

+/- 1 gram (car) / +/- 10 gram (commercial)

RPM

200RPM (car) / 100RPM (commercial)

Electrical supply

380/415 Volt (3 Phase)

Maximum Noise level

70DB

Balancing shaft

42mm

Accessories included

Rim width measuring caliper, wheel weight pliers with hammer, quick release wheel clamping nut, four balancing cones, wheel lifter (air operated)

Nett weight of machine (excluding packaging)

270kg

Gross weight of machine (including packaging)

332kg

Machine dimensions (Width x Depth x Height)

1800mm x 1200mm x 1850mm (includes hood)

Packaged dimensions (Length x Width x Height)

1300mm x 990mm x 1130mm

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

Tyre Equipment Accessories DTMKIT

KH / ST-4

Plastic demount head / quick release

Tyre machine starter kit

MJ-B

Motorcycle adaptor kit

KT-4

Plastic jaw protectors

QT20

Plastic protector for tyre lever

CT-A

Plastic bead breaker spade protector

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. 01604 www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. 01604 828 557

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. * To validate warranty, proof of a valid maintenance contract will be required.

DL240 /Two Post Electro-hydraulic Lift The Dunlop DL240Two Post Electro-hydraulic Lift is a 4 tonne two post lift with an H type baseframe. This lift is suitable for cars and vans (excluding LWB). With two stage long rear arms and three stage short front arms all fitted with screw adjustable (110 - 155mm) lifting pads, this lift is highly versatile.

TECHNICAL SPECIFICATION Lifting capacity

4 tonnes

CE Approved

Yes

Lifting time (1 Phase Motor/3 Phase Motor)

75/60 seconds

Packaged Dimensions (Length x Width x Height)

2900mm x 530mm x 700mm

Maximum lifting height

1800mm -1955mm

Gross weight of lift (including packaging)

700kg

Minimum pad height

110mm - 155mm

Nett weight of lift (excluding packaging)

650kg

Distance between posts (drive through)

2760mm

Overall width of lift

3484mm

OPTIONAL EXTRAS DL240PADKIT - 4 x 80mm & 4 x 150mm pad extensions

Front arms (3 stage)

600mm - 1100mm

Rear arms (2 stage)

845mm - 1330mm

Maximum Noise level

<70DB (1m)

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

DL240B /Two Post Baseless Electro-hydraulic Lift

+1000mm with optional extension kit

The Dunlop DL240B Two Post Electro-hydraulic Lift is a 4 tonne baseless two post lift . This lift is suitable for cars and vans (excluding LWB). With two stage long rear arms and three stage short front arms all fitted with screw adjustable (110 155mm) lifting pads, this lift is highly versatile.

TECHNICAL SPECIFICATION Lifting capacity

4 tonnes

Electrical supply (3 phase)

380/415 Volt (3 Phase)

Lifting time (1 Phase Motor/3 Phase Motor)

75/60 seconds

CE Approved

Yes

Maximum lifting height

1800mm -1955mm

Packaged Dimensions (Length x Width x Height)

2900mm x 530mm x 700mm

Minimum pad height

110mm - 155mm

Gross weight of lift (including packaging)

750kg

Clearance height

3600mm / 4600mm

Nett weight of lift (excluding packaging)

700kg

Distance between posts (drive through)

2760mm

Overall width of lift

3384mm

OPTIONAL EXTRAS DL240PADKIT - 80mm & 150mm pad extensions

Front arms (3 stage)

600mm - 1100mm

DL240BEXTENSION - 1000mm extension kit to raise gantry to 4600mm

Rear arms (2 stage)

845mm - 1330mm

Maximum Noise level

<70DB (1m)

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk â &#x201E; E. sales@dunlopge.co.uk â &#x201E; T. +44 (0) 1604 828 557

DL435/WA /Electro-hydraulic Four Post Lifts - Service / Wheel Alignment The Dunlop DL435 Lift range compromises of two models, a 3.5 tonne flat platform model and a 3.5 tonne wheel alignment platform (front recesses for turnplates which are excluded and rear slip plates). These lifts feature low voltage controls (24v) and require an air supply for operation of the pneumatic safety locks.

Solid post construction

Bearings under slip plates (WA)

Long run on ramps

TECHNICAL SPECIFICATION DL435

DL435WA (WHEEL ALIGNMENT)

Lifting capacity

3.5 tonnes

Lifting capacity

3.5 tonnes

Lifting / lowering time (1 Phase / 3 Phase Motor)

60 seconds / 40 seconds

Lifting / lowering time (1 Phase / 3 Phase Motor)

60 seconds / 40 seconds

Maximum lifting height

1790mm

Maximum lifting height

1820mm

Platform height (drive on)

140mm

Platform height (drive on)

170mm

Platform length

4380mm

Platform length

4880mm

Drive through width (between posts)

2760mm

Drive through width (between posts)

2760mm

Length of run on ramps (included)

920mm

Length of run on ramps (included)

1060mm

Adjustable platform

Yes

Adjustable platform

Yes

Width of platforms

500mm

Width of platforms

500mm

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

CE Approved

Yes

CE Approved

Yes

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

DSL45WA /4.5 Tonne Wheel Alignment Scissor Lift The Dunlop DSL45WA Scissor lift is built with a graceful outlook, at its lowest position the concealing structure hides the two levels and superior synchronization.The level of the lift can be adjusted in high precision to be suitable for various kinds of wheel alignment Easy for tyre mount,dismount and chassis maintenance The position of the front wheel turntable (optional extra) is moveable so that the side plate can fit more vehicles.The pneumatic double teeth self locking system and the anti-explosion pipe operate automatically when lowering the lift.

TECHNICAL SPECIFICATION Lifting capacity Height of platform lowered/raised Integral Scissor lift maximum height Width between platforms Overall width Platform length excluding ramps Overall length of lift Optional extras/ Accessories

4500kg 330/1850mm 450mm 820mm 2060mm 5030mm 5510mm Front wheel turntable

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. * To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk â &#x201E; E. sales@dunlopge.co.uk â &#x201E; T. 01604 828 557

DL445/WA /Electro-hydraulic Four Post Lifts - Service / Wheel Alignment The Dunlop DL445 Lift range compromises of two models, a 4.5 tonne flat platform model and a 4.5 tonne wheel alignment platform (front recesses for turnplates which are excluded and rear slip plates). These lifts feature low voltage controls (24v) and require an air supply for operation of the pneumatic safety locks.

Solid post construction

Bearings under slip plates (WA)

Long run on ramps

TECHNICAL SPECIFICATION DL445

DL445WA (WHEEL ALIGNMENT)

Lifting capacity

4.5 tonnes

Lifting capacity

4.5 tonnes

Lifting / lowering time (1 Phase / 3 Phase Motor)

60 seconds / 40 seconds

Lifting / lowering time (1 Phase / 3 Phase Motor)

60 seconds / 40 seconds

Maximum lifting height

1790mm

Maximum lifting height

1820mm

Platform height (drive on)

140mm

Platform height (drive on)

170mm

Platform length

4880mm

Platform length

4880mm

Drive through width (between posts)

2760mm

Drive through width (between posts)

2760mm

Length of run on ramps (included)

920mm

Length of run on ramps (included)

1060mm

Adjustable platform

Yes

Adjustable platform

Yes

Width of platforms

500mm

Width of platforms

500mm

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

CE Approved

Yes

CE Approved

Yes

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

Solid post construction

Bearings under slip plates (WA)

Long run on ramps

TECHNICAL SPECIFICATION DL445

DL445WA (WHEEL ALIGNMENT)

Lifting capacity

4.5 tonnes

Lifting capacity

4.5 tonnes

Lifting / lowering time (1 Phase / 3 Phase Motor)

60 seconds / 40 seconds

Lifting / lowering time (1 Phase / 3 Phase Motor)

60 seconds / 40 seconds

Maximum lifting height

1790mm

Maximum lifting height

1820mm

Platform height (drive on)

140mm

Platform height (drive on)

170mm

Platform length

4880mm

Platform length

4880mm

Drive through width (between posts)

2760mm

Drive through width (between posts)

2760mm

Length of run on ramps (included)

920mm

Length of run on ramps (included)

1060mm

Adjustable platform

Yes

Adjustable platform

Yes

Width of platforms

500mm

Width of platforms

500mm

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

CE Approved

Yes

CE Approved

Yes

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk â &#x201E; E. sales@dunlopge.co.uk â &#x201E; T. +44 (0) 1604 828 557

DSL3 / DTSL3 /Electro-hydraulic Full Rise Scissor Lift The Dunlop DSL/DTSL Scissor Lift range compromises of two models, a 3 tonne full rise electro hydraulic scissor lift and a 3 tonne mid rise electro-hydraulic. These lifts are suitable for cars and vans (excluding LWB). A DSL3 fixed ramp version (run on ramps lock) which extends the platforms by 600mm is also available. These lifts are low profile with a closed height of just 110mm and are suitable for surface mounted or recessed installation.

DSL3

720

635

290

1500

2080

DSL3FR (FIXED RAMPS)

DTSL3

800

TECHNICAL SPECIFICATION DSL3 FULL RISE

DTSL3 LOW RISE

Lifting capacity

3 tonnes

Lifting capacity

3 tonnes

Lifting time (1 Phase Motor/3 Phase Motor)

50 seconds

Lifting time (1 Phase Motor/3 Phase Motor)

40 seconds

Maximum lifting height

1840mm

Maximum lifting height

1000mm

Platform height

110mm

Platform height

110mm

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (1 Phase)

220/240 Volt (1 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

Electrical supply (3 phase)

380/415 Volt (3 Phase)

CE Approved Packaged Dimensions (Length x Width x Height) (Lift / Control box) Gross weight of lift / control box (including packaging)

Yes 1650mm x 700mm x 450mm / 500mm x 350mm x 1100mm 826kg / 62kg

CE Approved Packaged Dimensions (Length x Width x Height) (Lift / Control box) Gross weight of lift (including packaging)

Yes 1650mm x 700mm x 450mm / 500mm x 350mm x 1100mm 776kg / 62kg

Nett weight of lift / control box (excluding packaging)

786kg / 48kg

Nett weight of lift (excluding packaging)

736kg / 48kg

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

DML1 /Mobile Single Post Lift The Dunlop DML1 Mobile Single Post Lift has a 2.5 tonne lifting capacity. This mobile lift is perfect for expanding your workshop capacity without expanding your workshop. Fitted with a simple lever type moving system, it can be easily wheeled out to wherever you want to work, whether that is inside or outside your workshop. Perfect for wheel and tyre work, brake service, oil change and many of the smaller jobs where you dont require a fixed permanent lift.

Fitted with mechanical, electrical and hydraulic safety devices Compact for storage but is rapidly available for any lifting job Can lift vehicles for mechanical servicing body works Multi-purpose can be adapted to any car suitable for in and outdoor use IP 65 electrical protection, useful for outside use and car wash Suitable for lifting vehicles onto measuring/ straightening benches

TECHNICAL SPECIFICATION Mode of operation Capacity Weight Lifting/lowering time Max. Lifting height Min. height Motor

Electro-hydraulic 2,500kg 700kg 55/30s 1980mm 120mm 0,75 kW -380 - 415V/50Hz-3ph (16a Isolator required)

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk www.dunlopge.co.uk ⁄ E.⁄ sales@dunlopge.co.uk E. sales@dunlopge.co.uk ⁄ T.⁄ +44 T. 01604 (0) 1604 828828 557557

DMCP75 /Mobile Column Commercial Vehicle Lifts

Made in Europe

R AG E E Q

DUNLOP

ENT

DUN

The Dunlop DMCP75 commercial mobile column lifts are a quality European product which have a lifting capacity of 7.5 tonnes per column. Operation of these lifts is electro-mechanical and any-post controls mean the user can operate from any column. Additionally, manoeuvrability is simplified thanks to the integrated towing jacks.

PRO RANGE

5 YR SCREW & NUT

WARRANTY

TRIED AND TESTED DESIGN MANUFACTURED IN DENMARK EASY TO MOVE ANY POST CONTROLS 7.5 TONNE CAPACITY PER POST TECHNICAL SPECIFICATION Lifting capacity Operation Width between forks Width between forks (with small wheel adaptors) Maximum lifting height Electrical supply IP Rating CE Approved Warranty Optional extras

30 tonnes (7.5 tonnes per column) Electro-mechanical 600mm 230mm 1720mm 380/415 Volt (3 Phase) IP55 (Control boxes / motors) Yes 2 years (5 years on screws/nuts only)* DMCP75WHEELADAPTORS Small wheel adaptors( Cars/Vans)

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. * To validate warranty, proof of a valid maintenance contract will be required.

JACKING BEAMS/PIT JACKS Dunlop offer an extensive range of jacking beams & Pit Jacks for almost any vehicle lift or pit.

LARGE RANGE OF JACKING BEAMS TO CHOOSE FROM CHOICE OF LIFTING CAPACITY ALL AVAILABLE MANUAL OR AIR OPERATED

12 Tonne Pit Jack

TECHNICAL SPECIFICATION Jacking Beam Lifting capacity

2 tonnes

2.8 tonnes

4 tonnes

Pit Jack Capacity

12 tonnes

20 tonnes

Width when extended

1605mm

Lifting stroke

305mm

Width when retracted

800mm

815mm

864mm

Pressure relief valve

Yes

Minimum width over support arms

775mm

790mm

830mm

Spring loaded rollers

Yes

Maximum width over support arms

1125mm

1130mm

1300mm

Weight of unit

287kg

Closed height

212mm

242mm

254mm

205mm

Total lift

* To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk E. sales@dunlopge.co.uk ⁄ T. 01604 557 828 557 www.dunlopge.co.uk ⁄ E. ⁄sales@dunlopge.co.uk ⁄ T. 828 01604

DBJP /Bottle Jacks The Dunlop DBJP hydraulic bottle jack range is available in a choice of lifting capacities and lifting heights. All units feature and adjustable extension screw, and as standard are fitted with an over-loading saftey valve.

TECHNICAL SPECIFICATION

DBJP2

DBJP4

DBJP6

DBJP12

DBJSP12

DBJP20

DBJSP20

Lifting capacity

2 tonnes

4 tonnes

6 tonnes

12 tonnes

20 tonnes

Minumum height

183mm

204mm

219mm

240mm

153mm

242mm

165mm

Stroke

115mm

127mm

133mm

153mm

79mm

153mm

80mm

Extension screw adjustment

50mm

60mm

75mm

80mm

40mm

80mm

40mm

Total lifting height

348mm

391mm

427mm

473mm

272mm

475mm

285mm

Nett weight (excluding packaging)

2.6kg

4.2kg

4.6kg

7.9kg

6.3kg

12.5kg

9.4kg

Pieces in carton

Weight of carton

12.8kg

17.3kg

21.9kg

33.5kg

26.0kg

26.1kg

20.5kg

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. * To validate warranty, proof of a valid maintenance contract will be required.

DTRJP/ Trolley Jacks The Dunlop DTRJP trolley jack range is available in a choice of lifting capacities and most models feature which doubles the speed in which the hydraulic unit reaches the desired height.

quickliFT

quickliFt TECHNICAL SPECIFICATION

DTRJP3

DTRJQLP32

DTRJQLP2 Low & Long

DTRJQLP225 Low & Long

DTRJQLP5

DTRJQLP10

DTRJQLAP20 Air Operated

Lifting capacity

3 tonnes

3.2 tonnes

2 tonnes

2.25 tonnes

5 tonnes

10 tonnes

20 tonnes

Minimum height

133mm

145mm

80mm

63mm

165mm

175mm

190mm

Maximum lifting height

483mm

504mm

375mm

500mm

565mm

686mm

660mm

Stroke

343mm

359mm

295mm

437mm

400mm

511mm

470mm

Yes

Pad diameter

125mm

167mm

155mm

Nett weight (excluding packaging)

220kg

quickliFt

33.8kg

36.5kg

44.3kg

39.5kg

85.5kg

130kg

Pieces in carton

Weight of carton

37.6kg

38.5kg

48.5kg

41.5kg

91.5kg

140kg

259.1kg

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DTJ/ Transmission Jacks The Dunlop DTJ transmission jack range is available in a choice of lifitng capacities. All units feature quicklift which doubles the speed in which the hydraulic unit reaches the desired height.

Optional saddle for DTJP10

quicklift TECHNICAL SPECIFICATION

DTJP3

DTJP6

DTJP10

Lifting capacity

300kg

600kg

1000kg

Minimum height

1280mm

1267mm

1316mm

Maximum lifting height

2105mm

2097mm

2146mm

Stroke

825mm

830mm

Height of standard saddle

100mm

Width of standard saddle

435mm x 575mm

435mm x 720mm

Nett weight (excluding packaging)

31.0kg

36.3kg

43.9kg

Pieces in carton

Weight of carton

34.1kg

39.4kg

49.4kg

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

program

AGO40/40L / Optical Wheel Aligner (Tracking Gauges)

Made in the UK

The Dunlop AGO40 / 40L Optical Alignment Gauges are the industry standard tracking gauges. This basic, but effective design, has now been in use for over half a century! They are still the quickest method of accurately checking front and rear toe angles (tracking). The aligner measures in fractions of degrees that can be converted to millimetres or inches using the calculation dial (included). Calibration is very simple and any user can do it less than a minute! The laser model casts a line onto the target plate making it easier for the user to view the reading. Additionally, an optional right angled mirror (AGO42) is available for use with twin steering axles on commercial vehicles.

d program

Caster, Camber and KPI Gauges CG4/5 is a three way gauge that enables accurate measurements of wheel camber and caster angles as well as king pin inclination

CG600 is a set of two stearing turntables complete with run on ramps to facilitate measurement of castor angles and king pin inclination for checking toe-out on turns, wheel lock angles, and also full lock angles

CG4 is a quick and simple gauge for measuring camber angles and floor angles

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk

â &#x201E; E. sales@dunlopge.co.uk

â &#x201E; T. 01604 828 557

program

AGO75 / AGO80 Four Wheel Laser Aligner

Made in the UK

DUN

R AG E E Q

ENT

The Dunlop AGO75/80 range of wheel aligners are designed and manufactured in Britain to exacting standards. These robust, easy to use aligners offer the user a four wheel alignment solution which is very accurate. The cable free laser system, which produces clear laser lines for fast and accurate readings, is powered by rechargeable AA batteries which are included with each new machine. Available for both cars/vans (AGO75) and commercials (AGO80), the wheel aligners can be supplied with a wall mounting storage solution (AGO75/80WM) or mobile trolley (AGO75/80TR) - the choice is yours!

DUNLOP PRO RANGE YE

AR W RRANT A

xxxROLL NO NEED FOR BACK OR RUN OUT _____

NO NEED FOR AN EXPENSIVE WHEEL ALIGNMENT LIFT _____ SIMPLE AND VERY EASY TO USE

TECHNICAL SPECIFICATION

AGO75 (CAR & VAN)

AGO80 (CAR, VAN AND COMMERCIAL)

Wheel sizes Rear wheel target plates Steering wheel stop Brake pedal depressor Rechargeable batteries Turntables

10” - 22” Included Included Included Included Optional extras

10” - 22” (car/van) / 16” - 24” (commercial) Included Included Included Included Optional extras

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

GEA

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DCAP200 /8 CCD Computerised Wheel Aligner

DUN

R AG E E Q

DUNLOP

ENT

The Dunlop DCAP200 8 CCDWheel Aligner is a PC based wheel aligner with advanced features.This easy-to-use aligner with360°measurementaroundthevehiclecomescompletewithacomprehensive,built-invehicledatabaseandtestresults canbestoredandprinted.Theextremelyaccuratealignmentheadsareallpoweredbylithiumbatteriesandhaveintegrated displayswithbuilt-inkeypads.Thewheelclampsarefittedwithnylonlocatorsensuringno‘metal-to-metal’contactismade.

PRO RANGE YE

AR W RRANT A

PC Based with alignment test results xxx stored and printed -------------------8 CCD Infrared System -------------------Easy to use, comprehensive database and operating system -------------------Multi-langauge -------------------Suitable for low vehicles with wheels from 11” - 25” -------------------Quick set-up time

TECHNICAL SPECIFICATION Wheel sizes

11”-25”

Front wheels

Sensor heads with integrated displays Steering wheel stop Brake pedal depressor Rechargeable batteries (Lithium) Turntables / 3 point spring loaded clamps Nett/Gross weight of machine

4 Included Included Included Included 169kg / 212kg

+ 1’ / +24° Toe Camber + 1’ /+10° + 2’ /+20° Caster Steering axle + 2’ /+20° + 1’ / +10° Set-back Packaging dimensions

Accuracy / Range Rear wheels

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

Toe Camber Set-back Thrust-angle

Accuracy / Range + 1’ / +24° + 1’ / +10° + 1’ / +10° + 1’ / +10°

1140mm(L)x950mm(W)x1100mm(H)

DACP200 /Fully Automatic Air Conditioning Machine

Made in Europe

DUN

R AG E E Q

LCD Graphic display

DUNLOP

ENT

The Dunlop DACP200 Fully Automatic Air Conditioning Machine which is suitable for hybrid vehicles is a quality European product which has an integrated passenger car, commercial and agricultural vehicle database. As standard the machine includes an automatic dye injection system, a heated tank, a temperature probe coupling and a polyethylene structure, resistant to oil and refrigerants.

Thermal printer High/low pressure guages

PRO RANGE YE

AR W RRANT A

Robust polythene cabinet

Removable service panel

Sealed oil bottles

Wheels for easy maneuverability

TECHNICAL SPECIFICATION Mode of operation Refrigerant gas Display Vehicle database Vacuum pump Recovery compressor Refrigerant tank capacity Hybrid vehicle function Printer Length of hoses Automatic non-condensate vent

Fully automatic (with oil scales) R134a (model available for 1234YF gas) LCD Graphic display ( 260 x 64 pixel) Car, commercial and agricultural 100l/min 1060w 15l / 18kg (at 20°C) Yes Yes (thermal type) 3m (7.5m hoses available for agricultural - optional extra) Yes

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

Control buttons

DACP200YF /Fully Automatic Air Conditioning Machine

Made in Europe

The Dunlop DACP200YF Fully Automatic Air Conditioning Machine which is suitable for hybrid and electric vehicles is a quality European product which has an integrated passenger car, commercial and agricultural vehicle database. This advanced model is designed for R1234YF gas. As standard the machine includes an automatic dye injection system, a heated tank, a temperature probe coupling and a polyethylene structure, resistant to oil and refrigerants. Thermal printer Control buttons LCD Graphic display

High/low pressure guages

DUN

R AG E E Q

Robust polythene cabinet

DUNLOP

ENT

LCD Graphic Display and Gauges

Removable service panel

PRO RANGE YE

AR W RRANT A

Sealed oil bottles

Wheels for easy maneuverability

Fully automatic (with oil scales) R1234yf LCD Graphic display ( 260 x 64 pixel) Car, commercial and agricultural 100/113l/min (50/60Hz) 1060w 7,6l / 9.1kg (at 20°C) Yes Yes (thermal type 60mm) 3m (7.5m hoses available for agricultural - optional extra) Yes Yes (+30 Data Sets)

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DACP150/Air Conditioning Machine

Made in Europe

DUN

R AG E E Q

Data update USB port

LCD Graphic display

DUNLOP

ENT

Control buttons

The Dunlop DACP150 Air Conditioning Machine which allows you to operate either in a Manual or Automatic mode is a quality European product which can be used for passenger cars and vans. This model is designed for R134a gas. This machine includes a database that is updated through a USB port and is operated by the user. Optional features are available such as prearrangement for A/C System flushing and it is also possible to add on an embedded thermal printer.

High/low pressure guages

PRO RANGE YE

AR W RRANT A

Robust polythene cabinet

Removable service panel

Sealed oil bottles

Wheels for easy maneuverability

Automatic/Manual R134a LCD Graphic display ( 128 x 64 pixel) Car/Van 75 / 85l /min (50/60Hz) 1060w 7,6l / 9.2kg (at 20°C) No Optional (thermal type) 3m Yes

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. +44 (0) 1604 828 557

DAC / AIR COMPRESSORS The Dunlop DAC range of workshop compressors compromises of three different belt drive models. All are ideal for most applications, of high quality and are engineered for efficiency and reliability.

High Output -------------------Superior Valve & Cylinder Head Design -------------------Precision Engineered -------------------Efficient & Reliable -------------------High Quality Electric Motor -------------------Cast Iron Cylinder Providing Long Life -------------------Easy to Use

TECHNICAL SPECIFICATION Capacity - CFM Capacity - 1/min Capacity FAD - CFM Capacity FAD - 1/min Pressure - BAR Pressure - PSI Motor - kW Motor - Hp Power - Volts Receiver - Litres Weight - kg Dimensions - mm

DAC150/3/1

DAC200/3/1

DAC200/3/3

DAC270/75/3

15 430 10.1 280 10 145 2.2 3

15 430 10.3 280 10 145 2.2 3

230/50

230/50 or 400/50

150 105

200 118

30 840 23 650 11 160 5.5 7.5 400/50 270 190

1260 x 400 x 940

1400 x 450 x 940

1500 x 520 x 1060

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. * To validate warranty, proof of a valid maintenance contract will be required.

DNGEN01 / Nitrogen Generator The DNGEN01 plug and go PSA unit is suitable for cars and vans. All that is required for the unit to function is a 13amp standard socket and an air supply delivering between 130-145psi. This machine extracts air from the tyre using its powerful vacuum function and reinflates with high purity nitrogen.

Increased Tyre Life -------------------Increased MPG -------------------No Oxidation -------------------Safer Motoring -------------------Consistant Tyre Pressure -------------------98% Minimum Purity -------------------No Installation Required

TECHNICAL SPECIFICATION Minimum Purity

98%

Tyre Inflator and Pressure Gauge

Included

Electrical Supply

220/240 Volt (1 Phase)

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. * To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk â &#x201E; E. sales@dunlopge.co.uk â &#x201E; T. 01604 828 557

PROWORKSTATION1 /Workbench

Made in the UK

DUN

LOUVRE PANELS H 460mm W 1000mm D 20mm (2 x panels left and right) Mounts to free standing back strap (supplied) or straight to the wall Accommodates a range of storage bins Easily repositioned

DUNLOP

ENT

A R AG E E Q

The Dunlop range of workshop furniture is a quality product range which is both designed and manufactured in the UK. This new range of steel modular workshop furniture is logical and simple to configure and will give your working environment an extremely modern appearance. With a 40mm lino counter and a vice mounting plate included as standard, you can mount the vice in your preferred position.

FLAT BACK PANEL H 460mm W 750mm D 20mm Mounts to free standing back strap (supplied) or straight to the wall Attach magnets to use as a notice board Trunking unit can be fitted flush to panel (optional extra)

PRO RANGE YE

AR W RRANT A

Optional extras DWPTP100 POWER TRUNKING UNIT W 750mm with blank pop out plates -----------DWTP100 MOBILE TROLLEY H 840mm W 560mm D 570mm 5 x medium drawers (85mm): Internal H 70mm W 380mm D 455mm 1 x deep drawers (180mm): Internal H 160mm W 380mm D 455mm Drawers lined with foam and fully lockable. Lockable castors. Hard-wearing composite work surface.

FLOOR STANDING CUPBOARD UNIT H 900mm W 1000mm D 550mm 2-point locking door Adjustable inner shelf

FLOOR STANDING DRAWER UNIT H 900mm W 1000mm D 550mm 6 full-extension foam lined drawers 4 medium drawers 2 deep drawers Anti-tilt mechanism Fully lockable

TECHNICAL SPECIFICATION Overall width of unit Overall height of unit Overall depth of unit Vice plate included Anti tilt on drawers Load capacity per drawer at full extension

2750mm 1460mm 550mm Yes Yes 70kg

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk â &#x201E; E. sales@dunlopge.co.uk â &#x201E; T. 01604 828 557

PROWORKSTATION2 /Workbench

Made in the UK

DUN

LOUVRE PANELS H 460mm W 1000mm D 20mm (2 x panels left and right) Mounts to free standing back strap (supplied) or straight to the wall Accommodates a range of storage bins Easily repositioned

DUNLOP

ENT

A R AG E E Q

PRO RANGE YE

AR W RRANT A

Optional extras DWCP100 PAIR OF CUPBOARD UNITS H 2000mm W 500mm D 550mm Each cupboard with four adjustable shelves ------------

LED LIGHTING

DWPTP100 POWER TRUNKING UNIT W 750mm with blank pop out plates -----------DWTP100 MOBILE TROLLEY H 840mm W 560mm D 570mm 5 x medium drawers (85mm): Internal H 70mm W 380mm D 455mm 1 x deep drawers (180mm): Internal H 160mm W 380mm D 455mm Drawers lined with foam and fully lockable. Lockable castors. Hard-wearing composite work surface.

FLOOR STANDING CUPBOARD UNIT H 900mm W 1000mm D 550mm 2-point locking door Adjustable inner shelf

FLOOR STANDING DRAWER UNIT H 900mm W 1000mm D 550mm 6 full-extension foam lined drawers 4 medium drawers 2 deep drawers Anti-tilt mechanism Fully lockable

TECHNICAL SPECIFICATION Overall width of unit excluding optional cupboards Overall width of unit including optional cupboards Overall height of unit Overall depth of unit Vice plate included Anti tilt on drawers LED Lighting Load capacity per drawer at full extension

2750mm 3750mm 2000mm 550mm Yes Yes Yes (2750mm under top cupboards with low voltage transformer included) 70kg

Specifications/Images subject to change without prior notice. E&OE Images are for illustration purposes only. To validate warranty, proof of a valid maintenance contract will be required.

www.dunlopge.co.uk ⁄ E. sales@dunlopge.co.uk ⁄ T. 01604 828 557