6 minute read
Bezdan
CONTEMPORARY
LOOK. EXCEPTIONAL VALUE.
Cable Posts & Brackets
Top Mount Brackets
Cable Fittings
49-1/2” 49-1/2” 45-1/2” 45-1/2”
OVERVIEW w Post wall thickness is 0.12" to accommodate top mount brackets w End posts are pre-drilled for through-post cable fittings w Intermediate posts are predrilled for 1/8" diameter cable w Level and stair applications w Hole placement designed to meet code requirements for cable spacing w The extremely tight tolerance on the post tubing ensures a precision fit and quick-bonding with top mount brackets w Use Bezdan approved Loctite 680 quick-bonding adhesive with fittings to expedite installation time w Engineering Report w Meets ASTM A554 standard
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Top mount brackets for cable post, level and adjustable w Tensioner, through-post w Non-tensioner,through-post
INSTALLATION w Holes in post are drilled for ø 3/8" anchors (supplied by others) w Corner applications require the use of two end posts w Engineered for installation on wood, steel, and concrete substrates w Refer to the Downloads section on the product page for installation instructions
CABLE
2 Support Cylinders (supplied by others) NEW! Clickable Content
OVERVIEW w The block is used with fascia mount cable posts for balconies and decks with flooring or nosing overhangs w Use with Bezdan 2" x 2" x 0.12" square stainless steel fascia mount pre-drilled posts w Requires a 0.94" x 0.125" x 1.75" Alloy 316 stainless steel support cylinder to be installed in the bottom hole line of block and post (see diagram) w Engineering Report w Meets ASTM A554 standard
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS
New Part # Application Block Size Material Alloy Finish Height Weight CR1699 Level or Stair o 2" x 0.12" Stainless Steel 316L #4 Satin w Fascia mount cable posts w Support cylinder in alloy 316 (supplied by others)
INSTALLATION w Install support cylinders in the bottom hole line of the block and post. Refer to ILLUSTRATION 1 w Holes in block are drilled for ø 3/8" anchors (supplied by others) w Engineered for installation on wood, steel, and concrete substrates w Refer to the Downloads section on the product page for installation instructions w Cylinders to be stainless steel alloy 316 with cross sectional dimensions of 0.94" x 0.125" x 1.75" (supplied by others) w Install support cylinders in the bottom hole line of the block and post
0.12" n Cable Railing | Bezdan Cable geobezdan.com 1 800 663 6356
OVERVIEW w Suits Bezdan 2" x 2" x 0.12" square stainless steel fascia mount pre-drilled posts for level applications w Top mount bracket with ultra-low profile to create a streamlined railing w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use Bezdan approved Loctite 680 quick-bonding adhesive with fittings to expedite installation time w A reservoir in the bracket sleeve accommodates any excess adhesive w Available to suit square or rectangular handrail w Meets AISI steel grade designation
METAL USAGE w 316 indoor/outdoor use
RELATED PRODUCTS w Fascia mount cable posts w Loctite 680 w Suggested fastener: • Saddle to handrail, flat type, indoor/limited outdoor: Part #9934 for metal, #9930 for wood
OVERVIEW w Suits Bezdan 2" x 2" x 0.12" square stainless steel fascia mount pre-drilled posts for stair applications w Top mount bracket with ultra-low profile to create a streamlined railing w Connection sleeve depth provides increased strength and ample surface area for adhesive application w Use Bezdan approved Loctite 680 quick-bonding adhesive with fittings to expedite installation time w A reservoir in the bracket sleeve accommodates any excess adhesive w Available to suit square or rectangular handrail w Meets AISI steel grade designation
METAL USAGE w 316 indoor/outdoor use
RELATED PRODUCTS w Fascia mount cable posts w Loctite 680 w Suggested fastener: • Saddle to handrail, flat type, indoor/limited outdoor: Part #9934 for metal, #9930 for wood
OVERVIEW w Suits 2" x 2" x 0.12" stainless steel post for level and stair applications w Suits 4" x 4" nominal wood post for level applications w Swageless tensioning component w For stair applications use with beveled washer w Use with stainless steel cable, 1x19 L.H. lay, ø 1/8" w Suits runs up to 45 ft when paired with another tensioner w Supplied with acorn nut for a finished look w Test report w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Non-tensioner stud w Fascia mount cable posts
INSTALLATION w Refer to the Downloads section on the product page for installation instructions
OVERVIEW w Suits 4" x 4" nominal wood post for stair applications w Swageless tensioning component w For stair applications use with beveled washer w Use with stainless steel cable, 1x19 L.H. lay, ø 1/8" w Suits runs up to 45 ft when paired with another tensioner w Supplied with acorn nut for a finished look w Test Report w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Non-tensioner lag
INSTALLATION w Refer to the Downloads section on the product page for installation instructions
Quality, Safety and Performance
Non-Tensioner Stud, ø 1/8"
New Resource Library
OVERVIEW w Suits 2" x 2" x 0.12" stainless steel post for level applications w Swageless non-tensioning component w Use with stainless steel cable, 1x19 L.H. lay, ø 1/8" w Suits runs up to 25 ft (must be paired with a tensioning fitting) w Supplied with acorn nut for a finished look w Test Report w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Tensioner w Fascia mount cable posts, level INSTALLATION w Refer to the Downloads section on the product page for installation instructions
OVERVIEW w Suits 4" x 4" nominal wood post for level applications w Swageless non-tensioning component w Use with stainless steel cable, 1x19 L.H. lay, ø 1/8" w Suits runs up to 25 ft (must be paired with a tensioning fitting) w Test Report w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Tensioner
INSTALLATION w Refer to the Downloads section on the product page for installation instructions
Overview
w Suits metal or 4" x 4" nominal wood post for level and stair applications w Swageless tensioning component w Fittings can achieve angles up to 180° w Use with stainless steel cable, 1x19 L.H. lay, ø 1/8" w Suits runs up to 45 ft when paired with another tensioner w Supplied with two #8, alloy 316 stainless steel wood screws w Screws for metal post not included w Test Report w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Non-tensioner
INSTALLATION w Refer to the Downloads section on the product page for installation instructions
Overview
w For metal or wood posts w Swageless non-tensioning component w Level and stair applications w Fittings can achieve angles up to 150° w Use with stainless steel cable, 1x19 L.H. lay, ø 1/8" w Suits runs up to 25 ft (must be paired with a tensioning fitting) w Supplied with two #8, alloy 316 stainless steel wood screws w Screws for metal post not included w Test Report w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Tensioner
INSTALLATION w Refer to the Downloads section on the product page for installation instructions
ACCESSORIES | CABLE & REPLACEMENT PARTS
Stainless Steel Cable, 1x19 L.H. Lay, ø 1/8" and ø 3/16"
OVERVIEW w ø 1/8" cable with 1x19 left hand lay
METAL USAGE w 316 indoor/outdoor use
RELATED PRODUCTS w Tensioning and non-tensioning fittings
Part # Cable Length Material Alloy Finish Weight
CR1600-25 1/8" 25' Stainless Steel 316 Polished 1.00 lbs. each CR3600-25 3/16" 25' Stainless Steel 316 Polished 1.75 lbs. each
CR1600-100 1/8" 100' Stainless Steel 316 Polished 3.50 lbs. each CR3600-100 3/16" 100' Stainless Steel 316 Polished 7.00 lbs. each
Post Protector Sleeve, ø 1/8" and ø 3/16"
1.50 X A B
Wedge
Part
OVERVIEW w For corner and stair applications up to 45˚ to keep cable from biting into the wood w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
Part # Cable Size A B X Material Alloy Finish Weight
CR1905 ø 1/8" ø 0.14 ø 0.26 ø 0.39 Stainless Steel 316L Satin 0.01 lbs. each CR3905 ø 3/16" ø 0.22 ø 0.34 ø 0.55 Stainless Steel 316L Satin 0.01 lbs. each
CR1910 37.33˚ 0.57"
H NEW! Clickable Content ø 0.33 0.05
1/8" ø 0.71
OVERVIEW w Available to suit multiple angles w Use to ensure proper installation of through-post tensioner at an angle w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
Stainless Steel 316L Satin 0.03 lbs. each CR1911 40.27˚ 0.64" Stainless Steel 316L Satin 0.03 lbs. each CR1912 41.42˚ 0.67" Stainless Steel 316L Satin 0.03 lbs. each
OVERVIEW w Replacement receiver cone w Meets AISI steel grade designation
METAL USAGE w 316L indoor/outdoor use
RELATED PRODUCTS w Tensioning and non-tensioning fittings
