RailFX® by Bezdan Railing Solutions

RailFX® formerly ULTRA-TEC®

03/22

geobezdan.com

CABLE RAILING WITH INVISIWARE® RailFX® offers a comprehensive choice of cable railing infill featuring nearly invisible components that give the illusion of seamless, continuous cable for metal, wood, and concrete frameworks.

Metal Post Applications

Combine metal posts with cable infill for contemporary railings. u Suits pipe or round and square tubing u Level and angled applications u Through-post and surface mount installations

Wood Post Applications

Combine the warmth of wood with cable infill for modern railings. u Suits 4"x4" nominal post u Level and angled applications u Through-post and surface mount installations

Concrete Applications

Connect cable infill to concrete for a simple, clean railing. u Suits frameworks with concrete surfaces u Level applications u Surface mount installation

1 800 663 6356

FIGURE 13: RailFX® 232 Series Kit for Metal Post 23220

NEW! Clickable Content

Metal Post Applications

n Cable Railing | RailFX®

Contemporary Form and Industrial Flair u u u u

Suits pipe or round and square tubing Level and angled applications For indoor and outdoor use Through-post and surface mount fittings

Standard Cable Kits and À La Carte Components Save time and money with standard cable kits or à la carte components that enable cable to be installed at the same time as the railing framework. There is no need to provide exact measurements for cable to be cut and swaged or for costly swaging equipment. Standard Cable Kits in ø 1/8" and ø 3/16" Cable Size Everything Required to Install a Single Run of Cable u Includes cable, tensioning and non-tensioning fittings, and washers u Install cable by hand with pre-attached swaging stud and a swageless end fitting u Cable end with no fitting can be easily fed through intermediate and end posts u Cable available in increments of 5 ft from 5 ft – 30 ft and 40 ft and 50 ft lengths u Installation instructions included À La Carte Components in ø 1/8" and ø 3/16" Cable Size Individual Components for Ultimate Flexibility u Save valuable installation time by measuring and cutting cable on site u Tensioning and non-tensioning fittings sold individually u Install cable by hand with completely swageless end fittings u Cable available in 25 ft, 100 ft and 500 ft lengths to accommodate multiple or larger projects u Installation instructions included

Metal Usage Guide MATERIAL

03/22

geobezdan.com

INDOOR

OUTDOOR

Stainless Steel Alloy 316

Stainless Steel Alloy 17-4

Brass

1 800 663 6356

10 YEAR

10-Year Limited Warranty bezdanrailfx.com

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | THROUGH-POST 102 Series Kits, ø 1/8" and ø 3/16" Cable

Pre-Attached Threaded Swaging Stud and Cable

Pull-Lock® shown with Delrin Washer

Locknut and Stainless Steel Washer and Cap 0.537"

0.432"

0.45"

0.437" (1/8" Cable) 0.312" (3/16" Cable)

0.313"

METAL USAGE w 316 indoor/outdoor use w Brass indoor/outdoor use

1.562" 1.825"

2.94" (1/8" Cable) 2.763 (3/16" Cable)

5/8" Stainless Steel Flat Washer

OVERVIEW w Suits 2" round or square post w Level and angled applications w Suits runs up to 50 ft w Kit includes: • Cable, 1x19 L.H. lay • Tensioner: Pre-attached threaded swaging stud • Non-tensioner: Pull-lock swageless fitting • Brass locknut • 5/8" stainless steel flat washer • Delrin washer • Stainless steel cap • Stud bushing

RELATED PRODUCTS w Cable release key w Cable clip w Stainless steel cap (optional) w Cable cutter w Cleaner and protectant

Delrin® Washer

INSTALLATION w Refer to and ILLUSTRATION 4

Part #

Cable Length

Cable Size

Material

Alloy

Finish

Weight

10205-M

ø 1/8"

Stainless Steel

316

#4 Satin

0.32 lbs. each

10205-6-M

ø 3/16"

Stainless Steel

316

#4 Satin

0.32 lbs. each

10210-M

10'

ø 1/8"

Stainless Steel

316

#4 Satin

0.49 lbs. each

10210-6-M

10'

ø 3/16"

Stainless Steel

316

#4 Satin

0.49 lbs. each

10215-M

15'

ø 1/8"

Stainless Steel

316

#4 Satin

0.67 lbs. each

10215-6-M

15'

ø 3/16"

Stainless Steel

316

#4 Satin

0.67 lbs. each

10220-M

20'

ø 1/8"

Stainless Steel

316

#4 Satin

0.84 lbs. each

10220-6-M

20'

ø 3/16"

Stainless Steel

316

#4 Satin

0.84 lbs. each

10225-M

25'

ø 1/8"

Stainless Steel

316

#4 Satin

1.02 lbs. each

10225-6-M

25'

ø 3/16"

Stainless Steel

316

#4 Satin

1.02 lbs. each

10230-M

30'

ø 1/8"

Stainless Steel

316

#4 Satin

1.19 lbs. each

10230-6-M

30'

ø 3/16"

Stainless Steel

316

#4 Satin

1.19 lbs. each

10240-M

40'

ø 1/8"

Stainless Steel

316

#4 Satin

1.54 lbs. each

10240-6-M

40'

ø 3/16"

Stainless Steel

316

#4 Satin

1.54 lbs. each

10250-M

50'

ø 1/8"

Stainless Steel

316

#4 Satin

1.89 lbs. each

10250-6-M

50'

ø 3/16"

Stainless Steel

316

#4 Satin

1.89 lbs. each

geobezdan.com

1 800 663 6356

03/22

FIGURE 14: RailFX® Through-Post Components for Metal Posts

Building 3-1/2" min.

3-1/2" min.

Run #2

102 Series

Run #1

Pull-Lock

Pre-attached Threaded Swaging Stud with Stainless Steel Cap

03/22

geobezdan.com

1 800 663 6356

ILLUSTRATION 3 Level Runs and Runs with One corner w Requires a dedicated end post for each run w A double post corner configuration is required to create a 90˚ corner with two 45˚ bends w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings w Corner bend does not exceed 45˚ at any one time ILLUSTRATION 4 Angled Runs w Refer to illustration w Stainless steel cap (sold separately)

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | THROUGH-POST 212 Series Kits, ø 1/8" Cable

Invisiware® Receiver

Pull-Lock® shown with Delrin Washer 5/16-24

3/16"

0.437"

0.537"

0.437" 1.562"

1.562"

0.537"

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Cable release key w Cable clip w Bezdan Stainless ø 1-1/2" posts w Cable cutter w Cleaner and protectant

1.825"

Receiver Head

OVERVIEW w Suits 1-1/2” round or square post w Level applications w Suits runs up to 25 ft w Kit includes: • ø 1/8" cable, 1x19 L.H. lay • Tensioner: Invisiware receiver + pre-attached threaded swaging stud • Non-tensioner: Pull-lock swageless fitting • Delrin washers (2)

Pre-Attached Threaded Swaging Stud and Cable 0.25" 1.203"

INSTALLATION w Refer to ILLUSTRATION 5 Delrin® Washers

Part #

Cable Length

Cable Size

Material

Alloy

Finish

Weight

21205

ø 1/8"

Stainless Steel

316

#4 Satin

0.30 lbs. each

21210

10'

ø 1/8"

Stainless Steel

316

#4 Satin

0.48 lbs. each

21215

15'

ø 1/8"

Stainless Steel

316

#4 Satin

0.65 lbs. each

21220

20'

ø 1/8"

Stainless Steel

316

#4 Satin

0.83 lbs. each

21225

25'

ø 1/8"

Stainless Steel

316

#4 Satin

1.00 lbs. each

Round Posts Combine stainless steel ø 1-1/2" posts with cable railing to create elegant railings with industrial flare. u

Round Post | Bezdan Stainless

Cable Clip Use the cable clip for tempered glass or resin panel infill. u

Part #CC-1.8-SN | RailFX® page 40

geobezdan.com

1 800 663 6356

03/22

FIGURE 15:

House 3-1/2" min.

Run #3

Run #2

3-1/2" min.

212 Series

RailFX® 212 Series Kit and 232 Series Kit for Metal Post 21220 and 23205

ILLUSTRATION 5 Level Runs w Requires a dedicated end post for each run w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings

Run #1

Pull-Lock Invisiware receiver with 1/2" stainless steel spacer

03/22

geobezdan.com

1 800 663 6356

Angled Runs w For 1-1/2" posts on angled runs, use the 232 Series with a 1/2" stainless steel spacer w 232 Series | RailFX® page 8 w Stainless Steel Spacer | RailFX® page 36

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | THROUGH-POST 232 Series Kits, ø 1/8" Cable

Invisiware® Receiver

Pull-Lock® shown with Delrin Washer

5/16-24

3/16"

0.437"

0.537"

0.437"

0.537"

2.266"

Receiver Head

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Cable release key w Stainless steel spacer w Cable clip w Cable cutter w Cleaner and protectant

2.030"

OVERVIEW w Suits 2" round or square post w Level and angled applications w Suits runs up to 25 ft w Kit includes: • ø 1/8" cable, 1x19 L.H. lay • Tensioner: Invisiware receiver + pre-attached threaded swaging stud • Non-tensioner: Pull-lock swageless fitting • Delrin washers (2)

Pre-Attached Threaded Swaging Stud and Cable 0.25"

INSTALLATION w Refer to ILLUSTRATION 6

1.203"

Delrin® Washers

Part #

Cable Length

Cable Size

Material

Alloy

Finish

Weight

23205

ø 1/8"

Stainless Steel

316

#4 Satin

0.33 lbs. each

23210

10'

ø 1/8"

Stainless Steel

316

#4 Satin

0.50 lbs. each

23215

15'

ø 1/8"

Stainless Steel

316

#4 Satin

0.68 lbs. each

23220

20'

ø 1/8"

Stainless Steel

316

#4 Satin

0.84 lbs. each

23225

25'

ø 1/8"

Stainless Steel

316

#4 Satin

1.01 lbs. each

Stainless Steel Spacer For 1-1/2" posts on angled runs, use the 232 series with a 1/2" stainless steel spacer to properly achieve necessary tension and fit. u

Stainless Steel Spacer | RailFX® page 36

Cable Clip Use the cable clip for tempered glass or resin panel infill. u

Part #CC-1.8-SN | RailFX® page 40

geobezdan.com

1 800 663 6356

03/22

FIGURE 16: RailFX® 232 Series Kit for Metal Post 23220

House 3-1/2" min.

232 Series

Run #1

03/22

geobezdan.com

1 800 663 6356

Run #3

Run #2

3-1/2" min.

ILLUSTRATION 6 Level Runs w Requires a dedicated end post for each run w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings Long Runs with One Corner w For long cable runs that extend 25' or need to accommodate a corner, use the 262 Series. w 262 Series | RailFX® page 10

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | THROUGH-POST 262 Series Kits, ø 1/8" Cable

Invisiware® Receiver

Pull-Lock® shown with Delrin Washer 5/16-24

3/16"

0.437"

0.537"

0.437"

0.537" 1-9/16" 1.526"

3.5625"

METAL USAGE w 316 indoor/outdoor use

1.825"

Receiver Head

OVERVIEW w Suits 2" round or square post w Level and angled applications w Suits runs up to 50 ft w Can accommodate a level run with one corner w Kit includes: • ø 1/8" cable, 1x19 L.H. lay • Tensioner: Invisiware receiver + pre-attached threaded swaging stud • Non-tensioner: Pull-lock swageless fitting • Delrin washers (2)

RELATED PRODUCTS w Cable release key w Cable cutter w Cleaner and protectant

Pre-Attached Threaded Swaging Stud and Cable 0.25" 1.203"

INSTALLATION w Refer to ILLUSTRATION 7 Delrin® Washers

Part #

Cable Length

Cable Size

Material

Alloy

Finish

Weight

26205-M

ø 1/8"

Stainless Steel

316

#4 Satin

0.37 lbs. each

26210-M

10'

ø 1/8"

Stainless Steel

316

#4 Satin

0.55 lbs. each

26215-M

15'

ø 1/8"

Stainless Steel

316

#4 Satin

0.72 lbs. each

26220-M

20'

ø 1/8"

Stainless Steel

316

#4 Satin

0.89 lbs. each

26225-M

25'

ø 1/8"

Stainless Steel

316

#4 Satin

1.07 lbs. each

26230-M

30'

ø 1/8"

Stainless Steel

316

#4 Satin

1.24 lbs. each

26240-M

40'

ø 1/8"

Stainless Steel

316

#4 Satin

1.59 lbs. each

26250-M

50'

ø 1/8"

Stainless Steel

316

#4 Satin

1.94 lbs. each

Consult Local Building Authorities This product information is not intended for use as a recommendation for using or installing cable rail. It is the customer’s responsibility to ensure compliance with local, provincial or national building codes. Always consult with your local building department before starting your project. See the 2015 National Building Code under the “Resources” tab or visit geobezdan.com/nbc National Building Code cover image reproduced with the permission of the National Research Council of Canada, copyright holder.

geobezdan.com

1 800 663 6356

03/22

FIGURE 17: RailFX® 262 Series Kit for Metal Post 26230

House

Run #2

3-1/2" min.

262 Series

Run #1

ILLUSTRATION 7 Level Run with One Corner w Requires a dedicated end post for each run w A double post corner configuration is required to create a 90˚ corner with two 45˚ bends w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings w When used with a 2" post there will be a minimum of 1-1/2" of the receiver exposed Level Runs with Two Corners w For cable runs that need to accommodate two corners, use the 272 Series, available by special order. Please contact your Sales Representative for information

03/22

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | THROUGH-POST Swageless Stud, ø 1/8" Cable Stud

Collet

OVERVIEW w Three-part fitting includes stud, collet and set screw w Level and angled applications w Pair with Invisiware receiver to form tensioning end of cable run

Set Screw

1.050"

METAL USAGE w Stud and screw: 316 indoor/ outdoor use w Collet: 17-4 indoor/outdoor use RELATED PRODUCTS w Invisiware receiver w ø 1/8" cable, 1x19 L.H. lay w Cable cutter w Torx socket + 1/4" flare wrench w Cleaner and protectant

Swageless Stud

INSTALLATION w Insert cable into stud and hand tighten with supplied set screw w A collet inside the stud attaches to the cable, similar to a Push‑lock component w The collet exerts a strong clamping force on the cable during tightening

Invisiware® Receiver

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

SSA-4

Level and Angled, Tensioner Component

ø 1/8"

Stainless Steel

316 , 17-4

#4 Satin

0.019 lbs. each

Swageless Stud Save installation time and labor costs. The new swageless stud works with the Invisiware receiver and is an innovative through-post tensioning solution. u u u

A swageless, through-post solution Installs by hand on site No special equipment required

geobezdan.com

1 800 663 6356

03/22

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | THROUGH-POST Invisiware® Receiver, ø 1/8" Cable OVERVIEW w Available to suit 1-1/2" and 2" post w Level and angled applications w Compatible only with swageless stud part # SSA-4 w Pair with swageless stud to form tensioning end of cable run

5/16-24

3/16"

METAL USAGE w 316 indoor/outdoor use

0.437"

0.537"

Part #

Application

Post Type Cable Size

Length (L)

Material

Alloy

Finish

Weight

R-4-12

Level, Tensioner Component

1-1/2"

ø 1/8"

1.560"

Stainless Steel

316

#4 Satin

0.028 lbs. each

R-4-32

Level and Angled, Tensioner Component

ø 1/8"

2.030"

Stainless Steel

316

#4 Satin

0.034 lbs. each

RELATED PRODUCTS w Swageless stud w Pull-lock w Cleaner and protectant w Delrin washer w Stainless steel spacer

Pull-Lock®, ø 1/8" Cable OVERVIEW w Available to suit 1-1/2" and 2" post w Swageless non-tensioning component w Level and angled applications w Use with ø 1/8" cable, 1x19 L.H. lay w Supplied with cap for a clean finished look

0.537"

0.437"

METAL USAGE w 316 indoor/outdoor use

RELATED PRODUCTS w Swageless stud w Stainless steel spacer w Delrin washer w Cable release key w ø 1/8" cable, 1x19 L.H. lay Part #

Application

Post Type

Cable Size

Length (L)

Material

Alloy

Finish

Weight

PUL-4-12

Level, Non-Tensioner

1-1/2"

ø 1/8"

1.562"

Stainless Steel

316

#4 Satin

0.054 lbs. each

PUL-4-2.030

Level and Angled, Non-Tensioner

ø 1/8"

2.030"

Stainless Steel

316

#4 Satin

0.060 lbs. each

Easy as 1-2-3 Pull-Lock® components can be used with any tensioning device on the opposing end. u Simply pull the cable through the component u Tension cable and cut excess on the back end u Press on cap to cover bare cable end

03/22

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | SURFACE MOUNT Push-Lock® Tensioner with Threaded Bolt, ø 1/8" and ø 3/16" Cable

.375" Wrench Flat

OVERVIEW w Suits post and flat bar w Swageless tensioning component w Level applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion w Two-part tensioner: adjustable ± 1.00" to allow for sufficient take‑up

Broached for 1/8" Hex

1.25" 5/16-24 Adjustable ±1.00" 5.195" Open

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Push-lock threaded bolt w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

4.195" Closed

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-SFC-MS-4

Level, Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.175 lbs. each

PL-SFC-MS-6

Level, Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.100 lbs. each

Push-Lock® Threaded Bolt, ø 1/8" and ø 3/16" Cable

1.56"

OVERVIEW w Suits post and flat bar w Swageless non-tensioning component w Level applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion w Delrin washer included

0.645"

0.432" .375" Wrench Flat

5/16-24

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Push-lock tensioner with threaded bolt w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

Delrin® Washer

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-FM-MS-4

Level, Non-tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.059 lbs. each

PL-FM-MS-6

Level, Non-Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.058 lbs. each

geobezdan.com

1 800 663 6356

03/22

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | SURFACE MOUNT Push-Lock® Tensioner with Threaded Clevis, ø 1/8" and ø 3/16" Cable

.375" Wrench Flat

OVERVIEW w Suits post and flat bar w Swageless tensioning component w Angled applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion w Two-part tensioner: adjustable ± 1.00" to allow for sufficient take‑up

.375" Wrench Flat

Adjustable ±1.00"

5/16-24

METAL USAGE w 316 indoor/outdoor use

5.579" Open

RELATED PRODUCTS w Push-lock threaded clevis w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

4.573" Closed

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-SFC-MP-4

Angled, Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.132 lbs. each

PL-SFC-MP-6

Angled, Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.100 lbs. each

Push-Lock® Threaded Clevis, ø 1/8" and ø 3/16" Cable OVERVIEW w Suits post and flat bar w Swageless non-tensioning component w Angled applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion

1.56" 0.432"

METAL USAGE w 316 indoor/outdoor use

5/16-24

RELATED PRODUCTS w Push-lock tensioner with threaded clevis w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

03/22

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-CL-RP-4

Angled, Non-Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.092 lbs. each

PL-CL-RP-6

Angled, Non-Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.090 lbs. each

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

METAL POST APPLICATIONS | ALL CONFIGURATIONS Installation Guide The railing framework must be stable and robust enough to support cable tensioned to prevent cable deflection from allowing a 4” sphere to pass.

Max. 48"

Support posts no more than every 48".

3" clear opening between cables.

End Posts Since hundreds of pounds of tension are being applied to end posts using cable railing, posts must be strong l enough to support the tension. Please carefully review the requirements outlined on this page to ensure your installation provides appropriate support. For more detailed technical information regarding framework for cable rail installations go to bezdanrailfx.com. u u u u u u

Stainless steel alloy 316 posts are strongly recommended for exterior applications The railing framework must be stable and robust enough to support cable tensioned to prevent cable deflection from allowing a 4” sphere to pass Must be securely mounted to the deck to prevent the post from coming loose when cables are tensioned The 212 Series and the 232 Series (for angled applications) have been tested for use with Bezdan's stainless steel ø 1-1/2" posts. Test results available upon request. The 102, 232 and 262 Series metal post kits are designed for use with 2" square tube Wall thickness of end posts to be a minimum 1/4" to handle the load when the cables are tensioned while intermediate posts can be 1/8"

Intermediate Posts The cable should be supported in some manner no less than every 48" along its run to keep the cable rungs from spreading. Intermediate posts, other than those that are structurally necessary, can be a thin metal cable brace with holes for the cables to pass through (see Illustration above). A typical cable brace is 1/4" thick by 1" wide made of steel (to be painted) or stainless steel. Intermediate posts are available on special order (see page 38). Post for Intersecting Runs A desirable look, unique to RailFX®, is the ability to combine a through-post and surface mount fitting in a single corner post on the same plane. This feature achieves a 90˚ corner and the look of continuous cable. If a through-post installation is used the runs need to be offset and may appear unbalanced. Top and Bottom Rail Must be sufficient in strength for structural integrity. A bottom rail is not required but does help distribute the force away from the lower portion of the post. If using aluminum, the end posts should be reinforced. A bottom rail to prevent bowing is recommended. Completing the Cable Railing Cable railing requires 11 - 13 rows of cable depending on post height and railing framework. A 3" spacing between rows is recommended to comply with code requirements. All runs of cable and end fittings are installed before tensioning. Follow the recommended tensioning sequence to ensure proper installation and achieve optimal results.

geobezdan.com

Recommended Tensioning Sequence

1 800 663 6356

03/22

FIGURE 18: RailFX® 232 Series Kit for Metal Post 23220

03/22

geobezdan.com

1 800 663 6356

FIGURE 19: RailFX® 262 Series Kit for Wood Post 26240

NEW! Clickable Content

Wood Post Applications

n Cable Railing | RailFX®

Combine Warmth with Modern Appeal u u u u

Suits 4"x4" nominal wood post Level and angled applications For indoor and outdoor use Through-post and surface mount fittings

Metal Usage Guide MATERIAL

03/22

geobezdan.com

INDOOR

OUTDOOR

Stainless Steel Alloy 316

Aluminum Alloy 6063-T5

Brass

1 800 663 6356

10 YEAR

10-Year Limited Warranty bezdanrailfx.com

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | THROUGH-POST 102 Series Kits, ø 1/8" and ø 3/16" Cable

Pre-Attached Threaded Swaging Stud and Cable

Pull-Lock® shown with Stainless Steel Washer

Locknut and Stainless Steel Washer and Cap 0.437"

0.45"

0.437" (1/8" Cable) 0.312" (3/16" Cable)

0.313"

0.537" 1.562"

METAL USAGE w 316 indoor/outdoor use w Brass indoor/outdoor use

1.825"

2.94" (1/8" Cable) 2.763" (3/16" Cable)

1" Stainless Steel Flat Washer

OVERVIEW w Suits 4"x4" nominal post w Level and angled applications w Suits runs up to 50 ft w Kit includes: • Cable, 1x19 L.H. lay • Tensioner: Pre-attached threaded swaging stud • Non-tensioner: Pull-lock swageless fitting • Brass locknut • 1" stainless steel flat washer • 7/16" SAE stainless steel flat washer • Stainless steel cap

RELATED PRODUCTS w Cable release key w Cable clip w Post protector tubes w Stainless steel cap (optional) w Cable cutter

7/16” SAE Stainless Steel Flat Washer

INSTALLATION w Refer to ILLUSTRATION 8

Part #

Cable Length

Cable Size

Material

Alloy

Finish

Weight

10205-W

ø 1/8"

Stainless Steel

316

#4 Satin

0.32 lbs. each

10205-6-W

ø 3/16"

Stainless Steel

316

#4 Satin

0.320 lbs. each

10210-W

10'

ø 1/8"

Stainless Steel

316

#4 Satin

0.49 lbs. each

10210-6-W

10'

ø 3/16"

Stainless Steel

316

#4 Satin

0.490 lbs. each

10215-W

15'

ø 1/8"

Stainless Steel

316

#4 Satin

0.67 lbs. each

10215-6-W

15'

ø 3/16"

Stainless Steel

316

#4 Satin

0.670 lbs. each

10220-W

20'

ø 1/8"

Stainless Steel

316

#4 Satin

0.84 lbs. each

10220-6-W

20'

ø 3/16"'

Stainless Steel

316

#4 Satin

0.840 lbs. each

10225-W

25'

ø 1/8"

Stainless Steel

316

#4 Satin

1.02 lbs. each

10225-6-W

25'

ø 3/16"

Stainless Steel

316

#4 Satin

1.020 lbs. each

10230-W

30'

ø 1/8"

Stainless Steel

316

#4 Satin

1.19 lbs. each

10230-6-W

30'

ø 3/16"

Stainless Steel

316

#4 Satin

1.190 lbs. each

10240-W

40'

ø 1/8"

Stainless Steel

316

#4 Satin

1.54 lbs. each

10240-6-W

40'

ø 3/16"

Stainless Steel

316

#4 Satin

1.540 lbs. each

10250-W

50'

ø 1/8"

Stainless Steel

316

#4 Satin

1.89 lbs. each

10250-6-W

50'

ø 3/16"

Stainless Steel

316

#4 Satin

1.890 lbs. each

geobezdan.com

1 800 663 6356

03/22

FIGURE 20: RailFX® Surface Mount Components for Wood Posts

Building 3-1/2" min.

3-1/2" min.

Run #1

03/22

geobezdan.com

1 800 663 6356

Run #2

102 Series

ILLUSTRATION 8 Level Runs and Runs with One Corner w Requires a dedicated end post for each run w A double post corner configuration is required to create a 90˚ corner with two 45˚ bends w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings w Post protector tubes required for corner bend (sold separately)

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | THROUGH-POST 262 Series Kits, ø 1/8" Cable

Invisiware® Receiver

Pull-Lock® shown with Stainless Steel Washer

5/16-24

3/16"

0.437"

0.537"

0.437"

METAL USAGE w 316 indoor/outdoor use

1.562"

3.5625"

1.825"

Invisiware Receiver Head

OVERVIEW w Suits 4"x4" nominal post w Level and angled applications w Can accommodate a level run with one corner w Suits runs up to 50 ft w Kit includes: • ø 1/8" cable, 1x19 L.H. lay • Tensioner: Invisiware receiver + pre-attached threaded swaging stud • Non-tensioner: Pull-lock swageless fitting • 7/16" SAE stainless steel flat washers (2)

RELATED PRODUCTS w Cable release key w Cable Clip w Post protector tubes w Cable cutter w Cleaner and protectant

Pre-Attached Threaded Swaging Stud and Cable 0.25" 1.203"

INSTALLATION w Refer to ILLUSTRATION 9 and ILLUSTRATION 10

7/16" SAE Stainless Steel Flat Washers

Part #

Cable Length

Cable Size

Material

Alloy

Finish

Weight

26205-W

ø 1/8"

Stainless Steel

316

#4 Satin

0.37 lbs. each

26210-W

10'

ø 1/8"

Stainless Steel

316

#4 Satin

0.55 lbs. each

26215-W

15'

ø 1/8"

Stainless Steel

316

#4 Satin

0.72 lbs. each

26220-W

20'

ø 1/8"

Stainless Steel

316

#4 Satin

0.89 lbs. each

26225-W

25'

ø 1/8"

Stainless Steel

316

#4 Satin

1.07 lbs. each

26230-W

30'

ø 1/8"

Stainless Steel

316

#4 Satin

1.24 lbs. each

26240-W

40'

ø 1/8"

Stainless Steel

316

#4 Satin

1.59 lbs. each

26250-W

50'

ø 1/8"

Stainless Steel

316

#4 Satin

1.94 lbs. each

Post Protector Tubes Post protector tubes are required for corner and angled applications to keep the cable from biting into the wood. u

Part #CS-TUBE-6 | RailFX® page 36

geobezdan.com

1 800 663 6356

03/22

FIGURE 21: RailFX® 262 Series Kit for Wood Post 26240

House 3-1/2" min.

262 Series

Run #3

Run #2

3-1/2" min.

ILLUSTRATION 9 Level Runs w Requires a dedicated end post for each run w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings

Run #1

House

Run #2

3-1/2" min.

262 Series

Run #1

ILLUSTRATION 10 Level Runs with One Corner w Requires a dedicated end post for each run w A double post corner configuration is required to create a 90˚ corner with two 45˚ bends w There must be at least 3-1/2" of space behind the terminating post to allow access to install the fittings w Post protector tubes required for corner bend (sold separately) Level Runs with Two Corners w For cable runs that need to accommodate two corners, use the 272 Series, available by special order. Please contact your Sales Representative for information

03/22

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | THROUGH-POST Swageless Stud, ø 1/8" Cable Stud

Collet

OVERVIEW w Three-part fitting includes stud, collet and set screw w Level and angled applications w Pair with Invisiware receiver to form tensioning end of cable run

Set Screw

1.050"

Swageless Stud

Invisiware® Receiver

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

SSA-4

Level and Angled, Tensioner Component

ø 1/8"

Stainless Steel

316 , 17-4

#4 Satin

0.019 lbs. each

Swageless Stud Save installation time and labor costs. The new swageless stud works with the Invisiware receiver and is an innovative through-post tensioning solution. u u u

A swageless, through-post solution Installs by hand on site No special equipment required

geobezdan.com

1 800 663 6356

03/22

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | THROUGH-POST Invisiware® Receiver, ø 1/8" Cable OVERVIEW w Suits 4" x 4" nominal post w Level and angled applications w Compatible only with swageless stud part # SSA-4 w Pair with swageless stud to form tensioning end of cable run

5/16-24

3/16"

METAL USAGE w 316 indoor/outdoor use

0.437"

0.537"

3.5625"

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

R-4-62

Level and Angled, Tensioner Component

ø 1/8"

Stainless Steel

316

#4 Satin

0.071 lbs. each

RELATED PRODUCTS w Swageless stud w Pull-lock w Cleaner and protectant w Stainless washer 7/16 SAE (supplied by others)

Pull-Lock®, ø 1/8" Cable OVERVIEW w Suits 4" x 4" nominal post w Swageless non-tensioning component w Level and angled applications w Supplied with cap for a clean finished look 0.437"

METAL USAGE w 316 indoor/outdoor use

0.537" 2.030"

RELATED PRODUCTS w Swageless stud w Invisiware receiver w Cable release key w Post protector tubes w ø 1/8" cable, 1x19 L.H. lay w Stainless washer 7/16 SAE (supplied by others)

2.266"

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PUL-4-2.030

Level and Angled, Non-Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.060 lbs. each

03/22

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | SURFACE MOUNT Push-Lock® Tensioner with Hanger Bolt, ø 1/8" and ø 3/16" Cable

.375" Wrench Flat

OVERVIEW w Suits 4"x 4" nominal post w Swageless tensioning component w Level applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion w Two-part tensioner: adjustable ± 0.78" to allow for sufficient take-up

Broached for 1/8" Hex

1.154" Adjustable ±0.78"

1.45"

METAL USAGE w 316 indoor/outdoor use

4.976" Open

RELATED PRODUCTS w Push-Lock® Lag w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

4.201" Closed

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-SFC-WS-4

Level, Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.192 lbs. each

PL-SFC-WS-6

Level, Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.110 lbs. each

Push-Lock® Lag, ø 1/8" and ø 3xX/16" Cable

1.63"

OVERVIEW w Suits 4"x 4" nominal post w Swageless non-tensioning component w Level applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion

1.55"

0.432" .375" Wrench Flat

5/16-9

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Push-lock tensioner with hanger bolt w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-LAG-4

Level, Non-Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.065 lbs. each

PL-LAG-6

Level, Non-Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.064 lbs. each

geobezdan.com

1 800 663 6356

03/22

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | SURFACE MOUNT Push-Lock® Tensioner with Lag Clevis, ø 1/8" and ø 3/16" Cable

.375" Wrench Flat

OVERVIEW w Suits 4"x 4" nominal post w Swageless tensioning component w Angled applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion w Two-part tensioner: adjustable ± 1.00" to allow for sufficient take-up

.375" Wrench Flat

Adjustable ±1.00"

1.61"

METAL USAGE w 316 indoor/outdoor use

5.579" Open

RELATED PRODUCTS w Push-lock with lag clevis w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

4.573" Closed

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-SFC-WP-4-1

Angled, Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.145 lbs. each

PL-SFC-WP-6-1

Angled, Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.110 lbs. each

Push-Lock® Lag with Clevis, ø 1/8" and ø 3/16" Cable OVERVIEW w Suits 4"x 4" nominal post w Swageless non-tensioning component w Angled applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion

2.30" 1.55"

1.56"

METAL USAGE w 316 indoor/outdoor use

0.432" 5/16-9

03/22

RELATED PRODUCTS w Push-lock tensioner with hanger bolt w Cable, 1x19 L.H. lay w Cable cutter w Cleaner and protectant

Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-LAG-CL-TE4-1

Angled, Non-Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.108 lbs. each

PL-LAG-CL-TE6-1

Angled, Non-Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.107 lbs. each

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

WOOD POST APPLICATIONS | ALL CONFIGURATIONS Installation Guide The railing framework must be stable and robust enough to support cable tensioned to prevent cable deflection from allowing a 4” sphere to pass.

Max. 48"

Support posts no more than every 48".

Max. 48"

3" clear opening between cables.

End Posts Since hundreds of pounds of tension are being applied to end posts using cable railing, posts must be strong enough to support the tension. Please carefully review the requirements outlined on this page to ensure your installation provides appropriate support. For more detailed technical information regarding framework for cable rail installations go to bezdanrailfx.com. u u u

A minimum 4"x4" nominal post (3-1/2"x3-1/2" actual size) end post is required to keep from bending when cables are tensioned The railing framework must be stable and robust enough to support cable tensioned to prevent cable deflection from allowing a 4” sphere to pass Must be securely mounted to the deck to prevent the post from coming loose when cables are tensioned

Intermediate Posts The cable should be supported in some manner no less than every 48" along its run to keep the cable rungs from spreading. Intermediate posts, other than those that are structurally necessary, can be a thin metal cable brace with holes for the cables to pass through (see Illustration above). A typical cable brace is 1/4" thick by 1" wide made of steel (to be painted) or stainless steel. Intermediate posts are available on special order (see page 38). Post for Intersecting Runs A desirable look, unique to RailFX®, is the ability to combine a through-post and surface mount fitting in a single corner post on the same plane. This feature achieves a 90˚ corner and the look of continuous cable. If a through-post installation is used the runs need to be offset and may appear unbalanced. Top and Bottom Rail Must be sufficient in strength for structural integrity. It is recommended to reinforce the flat edge under the top rail with a support such as a 2"x4". A bottom rail is not required but does help distribute the force away from the lower portion of the post. Completing the Cable Railing Cable railing requires 11 - 13 rows of cable depending on post height and railing framework. A 3" spacing between rows is recommended to comply with code requirements. All runs of cable and end fittings are installed before tensioning. Follow the recommended tensioning sequence to ensure proper installation and achieve optimal results.

Recommended Tensioning Sequence

geobezdan.com

1 800 663 6356

03/22

FIGURE 22: RailFX® Surface Mount Components for Wood Posts

03/22

geobezdan.com

1 800 663 6356

FIGURE 23: RailFX® Through-Post Components for Metal Posts

NEW! Clickable Content

Concrete Applications

n Cable Railing | RailFX®

Classic, Clean and Versatile u u u u

Mounts to concrete surface Level applications For indoor and outdoor use Surface mount fittings

New Products for Concrete Applications Introducing all new products for concrete applications including à la carte components that can install into a concrete surface offering a flexible solution for one or both ends of the cable. À La Carte Components in ø 1/8" and ø 3/16" Cable Size Surface mount options for level applications. u Save valuable installation time by measuring and cutting cable on site u Tensioning and non-tensioning fittings sold individually u Install cable by hand with completely swageless end fittings u Cable available in 25 ft, 100 ft and 500 ft lengths to accommodate multiple or larger projects u Installation instructions included

Metal Usage Guide MATERIAL Stainless Steel Alloy 316

03/22

geobezdan.com

1 800 663 6356

YEAR

INDOOR

OUTDOOR

10-Year Limited Warranty bezdanrailfx.com

NEW! Clickable Content

n Cable Railing | RailFX®

CONCRETE APPLICATIONS | SURFACE MOUNT Push-Lock® Turnbuckle Concrete Anchor Bolt, ø 1/8" and ø 3/16" Cable

.375" Wrench Flat

5/16-24 RH

.375" Wrench Flat

OVERVIEW w Suits concrete surface w Swageless tensioning component w Level applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion w Five piece tensioner: adjustable ± 2.00" to allow for sufficient take-up

5/16-24 LH

Approx. 7.6875" Open

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Push-lock concrete anchor bolt w Cable release key w Cable, 1x19 L.H. lay w Cable cutter w Concrete anchor (supplied by others)

5-9/16" Closed

INSTALLATION w Refer to ILLUSTRATION 11 Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-TB-AB-4

Level, Tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.253 lbs. each

PL-TB-AB-6

Level, Tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.253 lbs. each

ILLUSTRATION 11 w The concrete anchor (supplied by others) is driven into a pre-drilled hole in the concrete surface w The short thread of the anchor bolt portion of the fitting is threaded into the concrete anchor w The lock nut is installed first, followed by the body and the Push-lock stud w Attach the cable to the push‑lock w Tension is created by using the body as a turnbuckle w Secure with lock nut to prevent loosening

geobezdan.com

1 800 663 6356

03/22

NEW! Clickable Content

n Cable Railing | RailFX®

CONCRETE APPLICATIONS | SURFACE MOUNT Push-Lock® Concrete Anchor Bolt, ø 1/8" and ø 3/16" Cable

0.437"

OVERVIEW w Suits concrete surface w Swageless non-tensioning component w Level applications w Clean design with no visible threads: prevents buildup of particles that can cause corrosion

0.490" 1.560"

0.458"

METAL USAGE w 316 indoor/outdoor use

2.268"

RELATED PRODUCTS w Push-lock turnbuckle concrete anchor bolt w Cable, 1x19 L.H. lay w Cable cutter w Cable release key w Concrete anchor (supplied by others) INSTALLATION w A concrete anchor (supplied by others) is driven into a pre-drilled hole in the concrete surface w The anchor bolt is threaded into the concrete anchor w Attach cable to the Push-lock Part #

Application

Cable Size

Material

Alloy

Finish

Weight

PL-AB4

Level, Non-tensioner

ø 1/8"

Stainless Steel

316

#4 Satin

0.064 lbs. each

PL-AB6

Level, Non-tensioner

ø 3/16"

Stainless Steel

316

#4 Satin

0.062 lbs. each

Consult Local Building Authorities This product information is not intended for use as a recommendation for using or installing cable rail. It is the customer’s responsibility to ensure compliance with local, provincial or national building codes. Always consult with your local building department before starting your project. See the 2015 National Building Code under the “Resources” tab or visit geobezdan.com/nbc. National Building Code cover image reproduced with the permission of the National Research Council of Canada, copyright holder.

03/22

geobezdan.com

1 800 663 6356

FIGURE 24: RailFX® 262 Series Kit for Metal Post 26230

NEW! Clickable Content

n Cable Railing | RailFX®

CABLE & ACCESSORIES Stainless Steel Cable, 1x19, ø 1/8" and ø 3/16" Cable OVERVIEW w Cable with 1x19 left hand lay METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Swageless fittings for level and angled applications

1/8"

Part #

Cable Size

Length

Material

Alloy

Finish

Weight

CR1600-25

ø 1/8"

25'

Stainless Steel

316

Polished

1.00 lbs. each

CR3600-25

ø 3/16"

25'

Stainless Steel

316

Polished

1.75 lbs. each

CR1600-100

ø 1/8"

100'

Stainless Steel

316

Polished

3.50 lbs. each

CR3600-100

ø 3/16"

100'

Stainless Steel

316

Polished

7.00 lbs. each

CR1600-500

ø 1/8"

500'

Stainless Steel

316

Polished

20.50 lbs. each

CR3600-500

ø 3/16"

500'

Stainless Steel

316

Polished

42.10 lbs. each

Delrin Washer OVERVIEW w Seal for components to prevent water seepage and bimetallic corrosion

0.563"

RELATED PRODUCTS w Invisiware receiver w Pull-lock Part #

Material

Color

Weight

W-R6B

Polymer

Black

0. 00015 lbs. each

Torx Socket 1/4" Drive ratchet (supplied by others) Torx socket

Swageless stud

1/4" Flare wrench (supplied by others)

03/22

OVERVIEW w Use torx socket together with drive ratchet and flare wrench to tighten the swageless stud into the Invisiware receiver RELATED PRODUCTS w Swageless stud

Part #

Weight

T15 TORX

0.21 lbs. each

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

CABLE & ACCESSORIES Post Protector Tube

0.25

OVERVIEW w Suits ø 1/8" cable w For corner and angled applications up to 45˚ to keep the cable from biting into the wood

0.374

1.50

METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w 262 series kits for wood posts w 102 series kits for wood posts w Pull-lock swageless fitting for wood posts INSTALLATION w Refer to ILLUSTRATION 12

Part #

Material

CS-TUBE-6

Stainless Steel

Alloy

Finish

Weight

316

#4 Satin

0.007 lbs. each

Stainless Steel Spacer OVERVIEW w Used to allow for receiver extension in an angled application with 1-1/2" posts

0.44"

0.56"

METAL USAGE w 316 indoor/outdoor use

0.50"

RELATED PRODUCTS w 232 series kits Part #

Material

SPC-R6-.500

Stainless Steel

House

Post Protector Tube

Alloy

Finish

Weight

316

#4 Satin

0.051 lbs. each

ILLUSTRATION 12 Post Protector Tube Installation w Pre-drill wood posts with a 1/4" hole on the side of the posts where the cable exits at an angle w Tap the post protector tube into the wood post for a snug fit w Post protector tubes are designed to protect wood posts from chafing and incidental damage from the cables rubbing around the outside of the mid post cable holes

geobezdan.com

1 800 663 6356

03/22

NEW! Clickable Content

n Cable Railing | RailFX®

CABLE & ACCESSORIES Cable Release Key OVERVIEW w Suits ø 1/8" cable w Releases cable from push‑lock and pull-lock fittings before cable is tensioned RELATED PRODUCTS w All series kits for 1/8" cable w Push-lock fittings w Pull-lock fittings

8" -1/

INSTALLATION w Cable release key opens the spring loaded jaws that grip the cable prior to tensioning Part #

Material

Weight

PL-KEY

Polymer/Resin Blend

0.026 lbs. each

Cable Cutter OVERVIEW w For burr-free cutting of ø 1/8" cable w Shear-cut blades give clean and sharp cuts

Part #

Weight

C-CUTTER

0.74 lbs. each

Stainless Steel Cleaner and Protectant OVERVIEW w T9 spray-on protectant, SM 4 oz., LG 8 oz. w Rust Free spray-on stain remover, SM 4 fl. oz., LG 12 fl. oz. w Dissolves minor corrosion then leaves a protective coating that lasts for months INSTALLATION w Preserve the appearance and integrity of stainless steel after installation. See the "Resources" tab to learn more.

03/22

Part #

Description

Volume

Weight

T9RFSM

Small Kit

4 oz. & 4 fl. oz

1.00 lbs. each

T9RFLG

Large Kit

8 oz. & 12 fl. oz

1.83 lbs. each

geobezdan.com

1 800 663 6356

NEW! Clickable Content

n Cable Railing | RailFX®

CABLE & ACCESSORIES Cable Brace, Stainless Steel OVERVIEW w 1/4" x 1" brace w Suits ø 1/8" cable w For consistent cable spacing between structural posts w For level and angled applications w Suits 36" and 42" rail heights w Holes are drilled 3-1/8" on center METAL USAGE w 316 indoor/outdoor use RELATED PRODUCTS w Cable brace floor plates for wood frames INSTALLATION w For metal frames, weld brace in place w For wood frames, use cable brace floor plates Part #

Application

Length

# of Holes

Material

Alloy

Finish

Weight

u CB-34.5-SS-10

Level

34.5"

Stainless Steel

316

#4 Satin

2.20 lbs. each

u CB-40.5-SS-12

Level

40.5"

Stainless Steel

316

#4 Satin

2.63 lbs. each

u CBS-34.5-SS-10

Angled

34.5"

Stainless Steel

316

#4 Satin

2.20 lbs. each

u CBS-40.5-SS-12

Angled

40.5"

Stainless Steel

316

#4 Satin

2.48 lbs. each

u Products are available on special order. Contact your Sales Representative for more information.

Cable Brace Floor Plate OVERVIEW w For wood frame installations w For level applications w Countersunk fastener holes

1-1/4"

METAL USAGE w 316 indoor/outdoor use

Depth: 1/4" 2-1/4"

RELATED PRODUCTS w Cable brace, stainless steel INSTALLATION w Mounts to top or bottom rail or deck

Part #

Material

Alloy

Finish

Weight

u FLP-CBS

Stainless Steel

316

#4 Satin

0.16 lbs. each

u Products are available on special order. Contact your Sales Representative for more information.

geobezdan.com

1 800 663 6356

03/22

FIGURE 25: RailFX® 212 and 232 Series Kit

NEW! Clickable Content

n Cable Railing | RailFX®

CABLE & ACCESSORIES Cable Clip OVERVIEW w Suits ø 1/8" cable w Suits up to 6.35mm tempered glass or resin panel w Minimum thickness of 4.76mm for infill recommended w Supplied with M6 and M8 set screws Front

Back

METAL USAGE w Solid brass indoor/outdoor use

Side

RELATED PRODUCTS w 102 series kits w 212 series kits w 232 series kits w 262 series kits ( For wood only) INSTALLATION w Refer to ILLUSTRATION 13 Part #

Material

Finish

Weight

CC-1.8-SN

Solid Brass

Electro-plated Satin Silver

0.11 lbs. each

Larger Cable Sizes For commercial or public applications, 3/16" or 1/4" diameter cable is recommended. u

Please contact your Sales Representative for design and technical support.

ILLUSTRATION 13 Cable Clip Installation w Fasten clip on cable using a stainless steel M6 set screw (supplied) w Infill panel is securely held in place with a stainless steel M8 set screw (supplied)

Performance & Safety Cable Clips are engineered and tested to meet the National Building Code requirements for infill loads. Test data and additional product information can be found at bezdancableclip.com.

geobezdan.com

1 800 663 6356

03/22