Gazebo Replacement Canopy
Product Code: D71 M83028 02628062-8 805670024222
11 ft x 11 ft CURVED PERGOLA
Gazebo Replacement Canopy
Gazebo Replacement Canopy
IMPORTANT SEARS INSISTS ON THE HIGHEST STANDARDS OF FURNITURE. EACH PIECE HAS BEEN CAREFULLY INSPECTED BEFORE SHIPMENT.
IN CASE OF PROBLEM, DO NOT RETURN TO THE STORE, CALL YOTRIO CORPORATION AT PHONE# 1-866-905-4107 BETWEEN THE HOURS OF 8:30 AM TO 5:00 PM PST, MONDAY THROUGH FRIDAY, FOR ANY QUESTIONS OR PROBLEM YOU MAY HAVE.
NOTE: THIS GAZEBO IS MADE FOR THE PURPOSE OF PROVIDING LIMITED OITDOOR SUN SHADE AND NOTHING ELSE. IT IS NOT AS A TOY, A SHELTER OR A TENT. CHILDREN UNDER AGE OF 12 NEAR TEH FACILITY SHOULD BE SUPERVISED BY A COMPETENT AUDIT.
Gazebo Replacement Canopy
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
PARTS LIST PARTS NO.
QTY
A
1 PC
Tow Rope Crossbeam 1
B
1 PC
Tow Rope Crossbeam 2
C
1 PC
Top Tube
D
2 PCS
Bending Tube 1
E
2 PCS
Bending Tube 2
F
2 PCS
Side Bending Tube 1
G
2 PCS
Side Bending Tube 2
H
2 PCS
Tow Rope Leg Tube
I
2 PCS
Leg Tube
J
1 PC
Sunshade
K
2 PCS
Replacement Canopy
L
12 PCS
M6*15 Nuts & Bolts
M
4 PCS
M5*15 Nuts & Bolts
NAME
DESCRIPTION
Gazebo Replacement Canopy
1
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
PARTS LIST PARTS NO.
QTY
NAME
DESCRIPTION
N 72 PCS
M6*16 Nuts & Bolts
O 10 PCS
M6*35 Nuts & Bolts
P
8 PCS
M6*72 Nuts & Bolts
Q
2 PCS
Rope Holder
R
1 PC
Top Tube Connector
S
4 PCS
Base
T
2 PCS
Decorative Base 1
U
2 PCS
Decorative Base 2
V
6 PCS
Decorative Extrusion 1
W
4 PCS
Decorative Extrusion 2
X
2 PCS
Sliding Tube
Y 16 PCS
Ground Spike
Z
Allen Wrench
2 PCS Gazebo Replacement Canopy
2
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 1: Insert Side Bending Tube 1 (F) into Side Bending Tube 2 (G), then align all bolt holes and fasten by using M6*16 Nuts & Bolts (N).
F
G
N
F
1
G
Step 2: Insert Bending Tube 1 (D) into Bending Tube 2 (E), then align all bolt holes and fasten by using M6*16 Nuts & Bolts (N).
D
E
N
D
E
Gazebo Replacement Canopy
2
3
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 3: Put the tube joint of Tow Rope Crossbeam 1 (A) and Tow Rope Crossbeam 2 (B) close to Top Tube (C), then embed Top Tube Connector (R) into joint and fasten by using M6*16 Nuts & Bolts (N). Step 4: Put the final assembled Bending Tube D and E close to Top Tube (C), then align all bolt holes and fastened by using M6*35 Nuts & Bolts (O). Step 5: Put the final assembled Side bending Tube F and G close to Top Tube (C), then align all bolt holes and fasten by using M6*35 Nuts & Bolts (O). Step 6: Line up the bolt holes on the assembled tube with corresponding bolt holes on Tow Rope Crossbeam A and B, then screw in the M6*16 Nuts & Bolts (N). A
R
C
F
O
5
O
B D
B
F
D
A
B
E
G
F
3
N
G
N
N
E
G
4
G
N
B
G
6 Gazebo Replacement Canopy
4
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 7: Unfold the Replacement Canopy (K), insert the tube joint on Canopy (K) one with another. Then put it close to Top Tube (C) and tighten by using M6*35 Nuts & Bolts (O). k
O
O
7
O
O
c x
k
x
L
8
Step 8: Insert the Sliding Tube (X) into the Replacement Canopy (K) and pass through pulley until it reaches to the other end. Then insert the tube joint on Canopy (K) one with another through pulley. Finally, align the holes on the pulley as well as Canopy (K) by using M6*15 Nuts & Bolts (L) and tighten it. Gazebo Replacement Canopy
5
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 9: Lay the Sunshade (J) onto the top of the pergola. Line up the bolt holes on the Sunshade with corresponding holes on the top, then screw in the M6*16 Nuts & Bolts (N).
N J
N
N N
J
J N N
F
9
G J
K
Gazebo Replacement Canopy
6
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 10: 1). Embed Decorative Base 1 (T) and Decorative Base 2 (U) into Tow Rope Leg Tube (H) and Leg Tube (I) respectively, then screw in the M6*16 Nuts & Bolts (N). 2). Align all bolt holes on Base (S) with corresponding bolt holes on Leg Tube H and I and screw together by using M6*16 Nuts & Bolts (N) with Allen Wrench (Z). H
T
U
N N
H
S
H
N
10 I
S
T
U N I
N
Gazebo Replacement Canopy
I
N
7
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 11: 1). Lift the whole top and make sure all leg tubes are in place. Align all bolt holes on the top tube with corresponding bolt holes on Leg Tube H and I and screw together by using M6*16 Nuts & Bolts (N) and M6*72 Nuts & Bolts (P). 2). Align all bolt holes on Decorative Extrusion 2 (W) and Decorative Extrusion 1 (V) with corresponding bolt holes and screw together by using M6*16 Nuts & Bolts (N). N P 1
11
N V 2
P
I H I
N
N W
H
Step 12: Screw the Rope Holder (Q) onto the Tow Rope Leg Tube (H) by using M5*15 Nuts & Bolts (M).
Q M
I
H
12
H
Gazebo Replacement Canopy
I
8
11 x 11 ft Curved Pergola Assembly Instructions GFM00110B Gazebo Replacement Canopy
Step 13: Insert the Ground Spike (Y) into the corresponding holes on the Base (S) to fix leg tubes.
S
13 Y
See our extensive assortment of outdoor living products on-line at Replacement Canopy www.sears.com and www. Gazebo kmart.com.
9
Gazebo Replacement Canopy
CARING FOR YOUR OUTDOOR GAZEBO Please keep this page for your records.
CARING FOR STEEL FRAMES Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches, lightly sand the affected area and apply touch-up paint. Periodically treat frames with a liquid wax for added protection against UV rays. Wash with a mild solution of soap and water; rinse thoroughly. Dry frames completely. Do not use bleach or solvents. Cover furniture with outdoor-furniture covers when not in use. Disassemble and store gazebo indoors during winter months.
CARING FOR A GAZEBO CANOPY Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents. Store canopy indoors during winter months to prevent collapse.
ASSEMBLY Always assemble your gazebo on a soft, non-abrasive surface. The gazebo is heavy; use care when handling. Assembly by two adults is recommended. Follow manufacturer’s instructions carefully.
WARNING This gazebo is not intended to be a permanent structure. Disassemble it during high winds or inclement weather to avoid damage. KEEP AWAY FROM OPEN FLAME AND OTHER SOURCES OF HEAT. Even canopies made with flame-resistant fabric are not fireproof and should never be allowed to come into contact with any source of heat.
Gazebo Replacement Canopy