2 minute read

ENVIROCYL QUICK PLUMB UNITS

Renewable heating technologies require a dedicated hot water storage cylinder with a larger coil to allow maximum heat transfer of renewable energy into the stored water.

The Firebird Envirocyl range of cylinders allow for the combination of different heat sources in an efficient, space saving and cost-effective manner. These cylinders have been specifically designed for use with the Firebird Enviroair Air Source Heat Pumps.

Priority hot water is enabled on all units, meaning that hot water is available on demand and the fast reheat and high insulation values make them highly efficient.

With a large proportion of the plumbing work already done at the manufacturing site, a pre-plumbed cylinder from Firebird in the UK can substantially cut onsite installation time by around 70%, reducing the amount of disruption to the customer. On installations using multiple cylinders, pre-plumbed cylinders help ensure consistency from one installation to the next.

In addition to significant reductions in installation times, pre-plumbed cylinders bring a consistency to each installation for a neater, more aesthetically appealing finish. They can also represent a substantial reduction in hassle and disruption to the homeowner or a house built as part of a planned build project.

With the most time-consuming aspects of the installation taken care of, all the plumber has to do is connect the Quick Plumb Unit, do a quick check of all the connections and it is ready for commissioning. solution that is cost-effective, but one that will stand the test of time.

For more information visit www.firebird.ie or email sales@firebird.ie

This article is from: