Agronomy Update Spring 2022

Page 1

AGRONOMY

UPDATE 2022

SPRING


CONTENTS

4

PRECISE APPLICATION OF FERTILISER

6

AGROCHEMICAL OPTIONS

20 SUGGESTED SOWING RATE

2

22

RECOMMENDED LISTS

28

PRODUCTS FOR DISEASE CONTROL

32

HERBICIDES

36

PLANT GROWTH REGULATORS

38

OIL SEED RAPE CANOPY MANAGEMENT

40

GRAIN MARKETS

GLANBIA IRELAND AGRONOMY UPDATE


Introduction Spring 2022 has arrived and unfortunately the threat of war in Eastern Europe has become a reality. Tillage farmers are well aware of the situation in Ukraine but the full repercussions of the associated political decisions are not fully known. Gas and fertiliser availability have been centre stage before the war commenced, but the supply situation has only been exasperated in recent weeks. Food security has now become a real issue and the recent setting up of the national fodder and food security committee will no doubt have an impact on the tillage sector in the near future. What exactly the impact of this is will be unknown for some time. The growing and producing of native cereals may become of greater importance in the near future to play their part in feeding the national herd and provide quality grains to the drinks and milling sectors. With this in mind growers must continue to strive to produce crops in a sustainable manner. The autumn of 2021 allowed for a decent drilling campaign, resulting in good area of winter cereals for harvest 2022. The majority of crops went into the ground in ideal conditions and have endured the winter in good order creating the potential for good yields come harvest time. Break crops continue to be a vital component of crop rotations, and the area of winter oilseed rape has increased once again. Break crops are a vital component of Integrated Crop Management and provide an ideal entry point for winter cereals. We now turn our attention to spring cropping, crop protection and agrochemical options available for the season ahead. With promising grain prices for the harvest ahead against a back drop of increased growing costs it has never been more important to maximise crops performance and yield. As always, the Glanbia Agronomy team are on hand to help growers make informed and conscious decisions this spring and for the year ahead. This technically astute team would be more than happy to discuss all aspects of successful crop production Wishing you all the best for the season ahead.

David Cooney, Agronomy Manager Glanbia Ireland

GLANBIA IRELAND AGRONOMY UPDATE

3


Precise Application of Fertiliser Written by Jayne Smyth

Steps to precise application of fertilisers Blends and granule sizes 1. Select a fertiliser spreader capable of even spreading at the desired bout width with the fertiliser types to be used. 2. Select fertiliser that has good spreading characteristics with at least 80% of the granules in the 2 - 4 mm size range and preferably smooth round shapes. 3. To ensure an even spread across the bout width, use the spreader manufacturer’s resources such as instruction manuals, internet material or phone apps, to set the spreader accurately for the fertiliser being used. To apply the correct rate of fertiliser, the spreader should be calibrated, using the manufacturer’s resources as a starting point.

Setting the fertiliser spreader

4. Clean after every working day and protect from corrosion. Check - all the spreading components for wear frequently.

There are two elements to getting fertiliser spread evenly at the correct rate in the field:

Fertiliser Characteristics

• Setting the spreader to spread evenly with a

The physical characteristics of the fertiliser will affect how evenly it spreads and the settings required. The key factors are:

• Calibrating the spreader to spread

• Density of the fertiliser: Low density fertiliser such as urea (80% normal density), is more difficult to throw.

• Size of the granules: Generally larger particles will

throw further. Particle size distributions with the majority of particles (80%) in the 2-4mm range will usually allow a good spread to be achieved, but larger diameters (3 – 4.5mm) will probably make it easier achieve wider spread widths. The component parts of blends should ideally have similar size distributions.

• Shape of the granule: Rounded particles

will roll off the disc more predictably than irregular granules or angular particles.

• Strength / hardness of granule: Strong

particles will resist break-up on the disc.

Some fertilisers are produced as rounded prills. As long as the density of the product is high and the size distribution is correct, prills will spread at least as well as similar sized granular products. The importance of physical quality depends on the bout width being used and the spreader. Generally wider bout widths require better physical quality.

Urea Urea has lower density which presents a greater spreading challenge and it usually will not spread as wide as denser material. Urea has a particle density of 0.7 to 0.8kg/L while other fertilisers such as CAN have a density of 1.0kg/L. Always look for a urea product with larger particle sizes. Even with a good size distribution it is vital that the correct spreader setting is used and that the limitations of the spreader with urea are observed (maximum bout width etc.). Wind will affect urea more than ordinary fertiliser, so spread in calm conditions if possible.

4

Urea has lower density which presents a greater spreading challenge and it usually will not spread as wide as denser material. Urea has a particle density of 0.7 to 0.8kg/L while other fertilisers such as CAN have a density of 1.0kg/L. Always look for a urea product with larger particle sizes. Even with a good size distribution it is vital that the correct spreader setting is used and that the limitations of the spreader with urea are observed (maximum bout width etc.). Wind will affect urea more than ordinary fertiliser, so spread in calm conditions if possible.

GLANBIA IRELAND AGRONOMY UPDATE

particular fertiliser at a specific bout width. the correct rate of fertiliser.

Setting for even spreading Most modern spreaders need some level of setting or adjustment to enable them to spread different fertilisers at different bout widths. The elements that may be set depending on the machine design include:

• • • •

Disc type and speed. Vane type and position u Fertiliser drop point on the disc. Height above crop. Spreader angle e.g. tilting discs upwards at back to throw further.

The setting needed is machine specific and is based on the type of fertiliser being spread and the bout width chosen. Basic information is given in the instruction manual, but increasingly either spreader manufacturer websites or phone apps are used to allow the operator easily access up-to-date setting information. Typically the operator is asked to identify the fertiliser being used by brand name or, by determining its size distribution (simple sieve box test), granule strength (simple pen-type tester), density (urea or not) and granule shape. The desired bout width is also entered in the app or web page. From this information an appropriate spread chart is selected and the spread element settings (discs, vanes, drop point etc.) are given. Usually a rate setting guide is also given once the desired rate in kg/ha is entered.


Calibration of fertiliser spreader Calibration of fertiliser spreaders is essential for accurate application rate of fertiliser. Fertiliser application rate is affected by: BOUT WIDTH Bout width is the distance from the centre of one tractor pass to the centre of the previous tractor pass. Spreaders can be set for different bout widths; the bout width is a key element for application rate setting. The accurate application of fertiliser over the working width depends on how accurate the bouts are. With cereals, tramlines ensure constant bout widths. On bare soil or on grassland, either the bouts must be marked temporarily or a GPS guidance system should be used. Trying to estimate bout widths of more than 10m by sight is risking accuracy.

FORWARD SPEED It is essential to have an accurate forward speed measurement, whether your tractor gives a direct speed reading or its read from a chart in conjunction with a tachometer (rev counter). The tractor’s speed measurement should be calibrated as tyre sizes and other factors will impact on accuracy. This is carried out by measuring a precise distance (e.g. 100m) and timing the tractor as it passes the start and finish of that distance. For example if it took 50 seconds, then its speed is 2m/s or 7.2 km/h (m/s x 3.6 = km/h). Various GPS based devices can give a forward speed measurement. Similarly an accurate indication of pto speed is essential to allow the spreader to be operated effectively.

Preparing the tractor and fertiliser spreader for work Before spreading the tractor and spreader should be checked and set-up according to the manufacturer’s instructions. While this will vary from machine to machine the following should be checked:

• Tractor forward speed and pto speed indicators working

or tachometer working with speed chart. Adequate front ballast for stability.

• Spreader attached securely to tractor; level from side to

side and centred (link arm stabilisers); top link in correct position to minimise spreader angle changes and correct length for required spreader angle.

• Lift controls set to allow correct disc height (as

determined by the manufacturer) from crop or ground.

• PTO guard intact and secure and all other guards in place, check vanes, discs, agitators and shutters/outlets for wear.

• Lubricate as per instruction manual.

REGULATOR SETTING Regulator setting of the shutter controls the amount of fertiliser leaving the hopper to the discs or spout. The wider the shutter opening, the higher the application rate will be.

CALIBRATION PROCEDURES Fertiliser flows at different rates depending on humidity, granule shape and size. The machine handbook, mobile phone applications, and fertiliser databases on the internet from manufactures give approximate guides to operators for regulator settings. Calibration of different spreader makes and models will vary. The spreader manufacturer’s instructions should be followed in all cases.

GLANBIA IRELAND AGRONOMY UPDATE

5


AGROCHEMICAL Options - Winter WHEAT 2022

Wheat WINTER WHEAT - T0 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

COMMENTS

Arizona/ Mirror

1.5 L/ha

Folpet 500g / litre. Needs to be used @ 1.5l/ha. Max 3.0l Ha allowed per crop. Use of folpet @ T0 timing will restrict use later on in the fungicide programme.

Tebucur

0.75 – 1.0 l/ha

Triazole plus Strobilurin mix. Should only be used in a high risk rust situation

+

+

Amistar

0.5/ha

Tebucur @ 0.75l/ha will deliver 175g of Tebuconazole. This is the minimum rate needed to knock down rust. Amistar @ 0.5 = 50% strobilurin loading.

Tebucur

0.75l/ha-1.0l/ha

Triazole plus Strobilurin mix. Should only be used in a high risk rust situation.

+

+

Comet

0.5/ha

Tebucur @ 0.75l/ha will deliver 175g of Tebuconazole. This is the minimum rate needed to knock down rust. Comet @ 0.5 = 50% strobilurin loading.

GENERAL COMMENTS 1. T0 on wheat should be applied at GS 30. 2. Triazole should only be considered @ T0 in severe Septoria or Rust cases. 3. For Mildew control add Tern @ 0.3 – 0.5 L/ha. Tern is a strong option on Wheat. 4. For Mildew prevention add 0.15 - 0.25 L/ha Talius or 0.5 L/ha Flexity (will not control established mildew). This could be beneficial with Mildew prone varieties. 5. Max overall total dose of any individual 500g/l Folpet product, i.e. Mirror / Arizona is 3.0 L/ha.

WINTER WHEAT - PGR OPTIONS (GS 30 - 32) PRODUCT/TIMING

RATE (L/HA)

GS 30 - 32 Scitec/ Modus

0.2 L/ha

+/-

1 - 2.0 L/ha

CeCeCe 75% / Holdup

+/-

COMMENTS Use 0.2L/ha rate Moddus/Scitec + CeCeCe @ GS30 - 31. Use only 0.3L/ha rate Moddus/ Scitec@ GS32. The use of Moddus/Scitec will also help plant rooting. Moddus/ Scitec = 250g/l Trinexapac.

1.5 - 2.0 L/ha

Trinexapac can be hard on crops. Straight CCC is much kinder and is still very effective, particularly on good standing varieties like Costello.

GS 30 - 32

0.2 – 0.32

Medax Max

Kg/ha

Medax Max @ 0.32 kg/ha = 25g Moddus + 15g Prohexadione. Works well in cool conditions. Will help plant rooting.

+/-

+/-

CeCeCe 75% / Holdup

1.0 L/ha

GS 30 - 32 CeCeCe 75% / Holdup

GENERAL COMMENTS 1. Growth Regulation can be combined with the T0 Fungicide. 2. Do not mix CeCeCe with Alister Flex, Monolith or Pacifica Plus. 3. Follow up PGR, in the form of Terpal and Cerone should not be applied to wheat destined for the mushroom trade. 4. Medax Max is approved for use on crops where the straw is destined for the mushroom trade.

6

GLANBIA IRELAND AGRONOMY UPDATE


Wheat WINTER WHEAT - SPRING HERBICIDE OPTIONS PRODUCT

RATE (L/HA)

COMMENTS

Zypar

0.65 - 1.0 L/ha

(Zypar = Boxer + Arylex mix) An excellent spring clean-up option. Very good on Vol Beans, Cleavers, Fumitory, Groundsel and Chickweed. Application rate depends on weed pressure at time of application. Will not control Wild Oats, Bromes and AMG. Up to GS 45 only. Can be mixed with Axial Pro.

Pixxaro

0.25 – 0.5 L/ha

(Pixxaro = Hurler + Arylex mix) Rate depends on target weed and size of weed. Keep rate at 0.5 L/ha to control Poppy and Chickweed. Good on Cleavers, Fumitory and Shepard Purse also. An alternative option to Zypar. Can be mixed with Axial Pro.

Alister Flex

0.7 - 1.0 L/ha

(Alister Flex = DFF + Meso + Iodo). Very good option if no autumn herbicide applied. Will control AMG, Bromes and Wild Oats. Narrow spectrum on broad leaf weeds. Mix with Zypar or SU to broaden control of broad leaf weeds. Aim to use early. Up to GS 29 only.

Pacifica Plus

0.3 - 0.5 Kg/ha

(Pacifica Plus = Meso + Iodo + Amido). Very good option if no autumn herbicide applied. Excellent on AMG, Bromes and Wild Oats. Better on strong Grass weeds then Alsiter Flex. Mix with Zypar, Galaxy or SU to broaden control of broad leaf weeds. Apply during good growth weather. Hot product. Mix with Bio Power @ 1.0 L/ha. Up to GS 39 only.

Monolith

0.2 - 0.33 Kg/ha

(Monolith = Meso + Propoxy). Excellent on Blackgrass, AMG, Bromes and Wild Oats. Narrow broad leaf label. Should be mixed with Zypar to broaden control of broad leaf weeds. Hot Product. Mix with Bio Power @ 1.0 L/ha. Up to GS 33 only.

Broadway Star

265 g/ha or (1.06Kg/4ha)

(Broadway Star = Boxer + Pyroxsulam). Excellent product on Bromes and Wild Oats. Will not control AMG. Very good spectrum on BLW such as Poppy, Cleavers and Speedwell. Apply during good growth weather. Mix with Torpedo @ 0.25 L/ha. Up to GS 32 only.

GENERAL COMMENTS 1. Do not mix Alister Flex, Pacifica Plus and Monolith with CeCeCe or PGR. 2. For best results, herbicides should be applied early and during periods of good growth. 3. Pacifica Plus and Monolith are hard on crops. Delfan Plus or Phylgreen @ 1.5 - 2.0 L/ha can be mixed with these products during applications to help reduce stress on crop and aid recovery. 4. SU products like Taxi, Cameo Max or Presite Max can be used where BLW tidy up is required. 5. Axial Pro can be used @ 0.5 L/ha – 0.6 L/ha as a selective Wild Oat herbicide.

GLANBIA IRELAND AGRONOMY UPDATE

7


AGROCHEMICAL Options - Winter WHEAT 2022

Wheat WINTER WHEAT - T1 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

COMMENTS

Elatus Era

0.8 - 1.0

+

+

Mirror/Arizona etc.

1.5

Peacoq

2.0

+

+

Pontoon

1.0

+

+

Mirror/Arizona etc.

1.5

Lentyma

1.2-1.5

Lentyma @ 1.5 = 67% Revysol (Mefentrifluconazole) and 80% Xenium.

+

+

Curative option, new curative triazole along with curative SDHI.

Mirror/Arizona etc.

1.5

Ascra Xpro

1.2 - 1.5

+

+

Mirror/Arizona etc.

1.5

Elatus Plus

0.60 – 0.75

Elatus Plus @ 0.75 L/ha (full rate) = 100% Solatenol.

+

+

Plexeo

1.2 – 1.5

Plexeo @ 1.5 L/ha (full rate) = 100% Metconazole. Full rate of pack will cover 17 acres. 80% rate of pack will cover 21 acres. Strong T1 option for Rust control.

+

+

Mirror/Arizona etc.

1.5

Revystar XL

1.5

Revystar @ 1.5 = 100% Mefentrifluconazole and 60% Xenium. An excellent SDHI option for

+

+

a high Septoria situation. Most curative SDHI available.

Mirror/Arizona etc.

1.5

Elatus Era @ 1.0 L/ha = 75% Proline + 100% Solatenol. Excellent product for Eyespot control and Rust control. Proline will help with Mildew control.

Peacoq @ 2.0 L/ha = 100% Inatreq (100g of Fenpicoxamid) Pontoon contains 63% Proline + 50% Tebuconazole. Inatreq is a new mode of action for a high Septoria and high Rust situations.

Ascra @ 1.2 L/ha = 80% Proline + 80% SDHI loading. Combination of 2 SDHI’s - Bixafen + Flupyram. Ascra has now taken the place of Aviator.

GENERAL COMMENTS 1. T1 fungicide application on winter wheat should be made at GS 31-32 when the 3rd last leaf is fully emerged. It is critically important to wait until the 3rd last leaf is fully emerged. 2. Folpet (Arizona / Mirror ) at 1.5 L/ha should be added to all treatments above as stated. 3. For Mildew control add Tern @ 0.3 – 0.5 L/ha. 15 metre buffer zone for Tern. 4. For Mildew prevention add 0.15 - 0.25 L/ha Talius or 0.3 - 0.5 L/ha Flexity. Very little effect on established Mildew. 5. Solatenol based products (Elatus Era or Elatus Plexo) can only be used once in program. 6. Max overall total dose of any individual 500g/l Folpet product, i.e. Mirror / Arizona is 3.0 L/ha.

8

GLANBIA IRELAND AGRONOMY UPDATE


Wheat WINTER WHEAT – T2 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

Revystar XL

1.5

+

+

Mirror/Arizona etc.

1.5

Elatus Plus

0.60 – 0.75

Elatus Plus @ 0.75 L/ha (full rate) = 100% Solatenol.

+

+

Plexeo

1.2 – 1.5

Plexeo @ 1.5 L/ha (full rate) = 100% Metconazole. Full rate of pack will cover 17 acres. 80% rate of pack will cover 21 acres.

+

+

Mirror/Arizona etc.

1.5

Ascra Xpro

1.2 - 1.5

+

+

Mirror/Arizona etc.

1.5

Elatus Era

0.8 - 1.0

+

+

Mirror/Arizona etc.

1.5

Peacoq

2.0

+

+

Pontoon

1.0

+

+

Mirror/Arizona etc.

1.5

COMMENTS Revystar @ 1.5 = 100% Mefentrifluconazole and 60% Xenium. An excellent SDHI option for a high Septoria situation. Most curative SDHI available. This will be the T2 of choice for 2022.

Do not use Elatus Plus Plexeo @ T2 if Elatus Era used at T1.

Ascra @ 1.5 L/ha = 100% Proline + 100% SDHI loading. Combination of 2 SDHI’s - Bixafen + Flupyram. Ascra has now taken the place of Aviator.

Elatus Era @ 1.0 L/ha = 75% Proline + 100% Solatenol. Excellent preventative Septoria control and Rust control. Be mindful to alternate triazole family throughout program. Do not use Elatus Era @ T2 if Elatus Plus Plexeo used at T1. Peacoq @ 2.0 L/ha = 100% Inatreq (100g of Fenpicoxamid) Pontoon contains 63% Proline + 50% Tebuconazole. Inatreq is a new mode of action for a high Septoria and high Rust situations. Only one application per crop is permitted.

GENERAL COMMENTS 1. T2 application in winter wheat should be made at GS 39 when the flag last leaf is fully emerged. Timing is crucial. 2. Folpet (Arizona / Mirror ) at 1.5 L/ha should be added to all treatments above as stated. 3. Max overall total dose of any individual 500g/l Folpet product, i.e. Mirror / Arizona is 3.0 L/ha. 4. For Mildew control @ 0.3 - 0.5 L/ha of Tern (if available) @ 0.3 – 0.5 L/ha. 15 metre buffer zone for Tern. 5. For Mildew prevention add 0.15 - 0.25 L/ha Talius or 0.3 - 0.5 L/ha Flexity. Very little effect on established Mildew.

GLANBIA IRELAND AGRONOMY UPDATE

9


AGROCHEMICAL Options - Winter WHEAT 2022

Wheat WINTER WHEAT - T3 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

COMMENTS

Prosaro

1.0

Prosaro @ 1.0 L/ha = 63% Proline + 50% Tebuconazole.

+/-

+

+/- 50% Strob loading.

Comet / Amistar

0.5/0.5

Decoy

0.5

+

+

Comet

0.5

Firefly

1.2

Decoy @ 0.5 L/ha = 63% Proline + 50% F500. Alternative option to Tebuconazole and may suit crops where late rust infection is an issue.

Firefly @ 1.2 L/ha = 63% Proline + 50% Strob loading.

GENERAL COMMENTS 1. T3 application on Winter Wheat should be applied between at GS59 - GS69 when the ear is flowering. 2. For Mildew control Tern @ 0.3 – 0.5 L/ha. 15 metre buffer zone for Tern.

10

GLANBIA IRELAND AGRONOMY UPDATE


e d i c i g n u f st u b o s Ar y a w l a e m m a r prog s off. pay

REVYSTAR XL ®

When it comes to disease control, a robust fungicide programme containing new innovation is key. Revystar ® XL provides ‘best-in-class’ control of Septoria, even against current resistant strains, and broad-spectrum disease control. The unique combination of Revysol® plus Xemium® also provides improved straw quality, allowing you to achieve superior and consistent yields, year after year. So, for higher performance and even greater yields, choose Revystar® XL.

Find out more at www.agricentre.basf.ie/revysol Revystar ® XL contains mefentrifluconazole (Revysol®) and fluxapyroxad (Xemium®). Revystar ® XL and Revysol® are registered Trademarks of BASF. © BASF 2022. All rights reserved. Use plant protection products safely. Always read the label and product information before use. Pay attention to the risk indications and follow the safety precautions on the label. Triple rinse containers and invert to dry at time of use. For further product information including warning phrases and symbols refer to www.agricentre.basf.ie


AGROCHEMICAL Options - Winter Barley 2022

BARLEY WINTER BARLEY - T1 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

Boogie

1.0 – 1.5

COMMENTS Boogie @ 1.0 L/ha = 66% Ptz + 66% Bixafen + 33% Spiroxamine. Excellent option for Mildew prone varieties. High loading of triazole and SDHI.

Decoy + Comet

0.5 + 0.5

Decoy @ 0.5 L/ha = 63% Proline + 50% F500. A good option for 2-row varieties with a high loading of triazole and strob.

Elatus Era

0.5 - 1.0

Elatus Era @ 1.0 L/ha = 75% Proline + 100% Solatenol. Excellent on Rust, and Ryncho. Good option on hybrid and 2-row varieties.

Zephyr

0.75

Zephyr @ 0.75 L/ha = 66% Proline + 26% Twist. An option for 2 row barley. Note; 0.75 L/ha is the max label rate for Zephyr.

GENERAL COMMENTS 1. Rates should be adjusted depending on disease pressures and conditions. 2. T1 on barley should be applied at GS 25-31 (1st node). 3. For Mildew control add 0.3 - 0.5 L/ha if Tern. 4. For Mildew prevention add 0.15 - 0.25 L/ha Talius or 0.5 L/ha Flexity (will not control established mildew). 5. Watch SDHI and Strob usage throughout program.

WINTER BARLEY - PGR OPTIONS (GS 30 - 32) PRODUCT/TIMING

RATE (L/HA)

COMMENTS

GS 30 - 32

0.2 L/ha

Use 0.1 - 0.2 L/ha rate Moddus/Scitec + CeCeCe @ GS30 - 31.

Moddus/Tempo/Freeze

Or

Use only 0.3 L/ha rate Moddus/Scitec@ GS32.

Or

0.2 L/ha

Optimus

+/-

+/-

1 - 2.0 L/ha

Optimus = 175g/l Trinexapac but rate does not need to be adjusted due to formulation of product. Correct PGR is critical for hybrid barley. For tiller manipulation, CCC needs to be applied mid-tillering (GS 23 – 25).

CeCeCe 75% / Holdup GS 30 - 32

0.2 - 0.32 Kg/ha

Medax Max +/- CeCeCe

+/-

75% / Holdup

1.0 L/ha

Medax Max @ 0.32 kg/ha = 25g Moddus + 15g Prohexadione. Works well in cool conditions.

GENERAL COMMENTS 1. Growth Regulation can be combined with the T1 Fungicide. 2. Be careful when mixing with wild oat herbicides and/or winter clean up herbicides as these can heat up mix. 3. Follow up PGR, in the form of Terpal / Medax Max, should be applied between growth stages 32 - 37.

12

GLANBIA AGRONOMY UPDATE


BARLEY WINTER BARLEY - T2 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

Zephyr

0.75

+/-

+/-

Swift

0.25

COMMENTS Zephyr @ 0.75 = 66% Proline + 26% Trifloxystrobin, Swift @ 0.25L /ha = 50% Trifloxystrobin. A very good option, particularly 2 row barley. Non SDHI option.

+/Arizona /Mirror

1.25

Decoy

0.5

+

+

Comet

0.5

+/-

+/-

Mirror/Arizona.

1.25

Elatus Era

0.5 - 1.0

+/-

+/-

Mirror/Arizona

1.25

Revystar

1.0 - 1.5

Non SDHI option.

Elatus Era @ 1.0 L/ha = 75% Proline + 100% Solatenol. Excellent on Rust, and Ryncho. Good option if timings get stretched with 2-row varieties. Be conscious of SDHI loading throughout program. Revystar @ 1.0 - 1.5 Revystar @ 1.5/ha = 100% 1.5/ha = 100% Mefentrifluconazole and 60% Xenium.

+/Arizona/Mirror

Decoy @ 0.5 L/ha = 63% Proline + 50% F500. A good option for 2-row varieties with a high loading of triazole and strob.

1.25

Excellent option for Ramularia control. Alternative triazole option to products containing Prothioconazole.

GENERAL COMMENTS 1. T2 on barley should be applied at GS 32-37 (2nd node - flag leaf emerging). The T2 should be applied earlier if the T1 was applied towards the end of tillering or if timings are stretched. 2. For Mildew control add Tern @ 0.3 – 0.5 L/ha. 15 metre buffer zone applies to Tern. 3. For Mildew prevention add 0.15 - 0.25 L/ha Talius or Flexity @ 0.5 L/ha (will not control established mildew). 4. Folpet (Arizona/Mirror etc.) should be included at T2 on all varieties to protect against an early onset of Ramularia. 5. Folpet should be used in situations where the threat of Ramularia is high or where the crop has suffered from stress early on.

GLANBIA IRELAND AGRONOMY UPDATE

13


AGROCHEMICAL Options - Winter Barley 2022

BARLEY WINTER BARLEY - FOLLOW UP PGR OPTIONS (GS 32 - 49) PRODUCT

RATE (L/HA)

GS 32 - 39

0.8 - 1.0 L/ha

Optimum timing for Terpal = GS 32 - 37. Use 0.8 - 1.0 L/ha where an earlier PGR was applied. Use 1.5 - 2.0 L/ha where no PGR was applied previously. Do not apply where awns are emerging.

0.2 - 0.32 Kg/ha

Medax Max @ 0.32 kg/ha = 25g Moddus + 15g Prohexadione. Can be applied up to 0.75 Kg/ha between GS 41 - 49. Max total dose of Medax Max on Winter Barley = 1.5 Kg/ha.

0.6 - 1.0 L/ha

Optimum timing for Cerone is GS 37. Hot product, should only be considered in fire brigade situations. Add to spray tank last.

Terpal

GS 41 - 49 Medax Max

GS 32 - 49 Cerone

COMMENTS

GENERAL COMMENTS 1. Not all crops will require a follow up PGR. Decision based on lodging assessment. 2. Can be combined with T2 fungicide. Don not leave late and get caught out with awns emerging. 3. Max total dose of Medax Max on Winter Barley = 1.5 Kg/ha. 4. Max total dose of Terpal on Winter Barley = 2.0 L/ha up to GS 39.

14

GLANBIA AGRONOMY UPDATE


BARLEY WINTER BARLEY - T3 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

(Barley Pack Ultra)

COMMENTS Barley Pack Ultra = 5L Priaxor in Can 1 and 2.5L of Decoy in Can 2. Sold together in the same box.

Priaxor

0.75

+

+

Decoy

0.4

+/-

+/-

Mirror/Arizona

1.25

Revystar

1.5

+/-

+/-

Mirror/Arizona

1.25

Elatus Era

0.65 - 1.0

+/-

+/-

Mirror/Arizona

1.25

Boogie

0.6 - 1.0

Boogie @ 1.0 L/ha = 66% Ptz + 66% Bixafen + 33% Spiroxamine.

+/-

+/-

Excellent option for Mildew prone varieties. High loading of triazole and SDHI.

Mirror/Arizona.

1.25

Priaxor @ 0.75 L/ha = 45% Xenium + 56% F500. Decoy @ 0.5 L/ha = 63% Proline. Excellent all round fungicide with excellent straw characteristics. 15 acre - 20 acre pack, rate depending.

Revystar @ 1.5 = 100% Mefentrifluconazole and 60% Xenium. An excellent option for Ramularia control. Xenium is a proven performer on Rhynco and Net Blotch.

Elatus Era @ 1.0 L/ha = 75% Proline + 100% Solatenol. Strong and robust option on Ryncho and Rust.

GENERAL COMMENTS 1. For Mildew control add 0.3 - 0.5 L/ha Tern. 15 metre buffer zone applies to Tern. 2. Be careful not to exceed max total overall doses of specific products throughout program. 3. Only 2 SDHI’s permitted on Barley. Only 2 application timings of Strobs permitted on Barley. 4. Folpet (Arizona/Mirror etc.) should be included at T2 and T3 on all varieties to protect against Ramularia. 5. T3 on Winter Barley should be applied at GS 39 - 49 (awns emerging).

The information provided is a guide only; always check product label before applying any pesticide.

GLANBIA IRELAND AGRONOMY UPDATE

15


AGROCHEMICAL OPTIONS WINTER / SPRING OATS 2022

OATS WINTER / SPRING OATS - T0 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

COMMENTS

Boogie

1.0 - 1.5

Boogie @ 1.0 L/ha = 66% Ptz + 66% Bixafen + 33% Spiroxamine.

+/-

+/-

Flexity @ 0.5/ha = 50% Metrafenone.

Flexity

0.5 – 1.0

Excellent mix if T0 gets delayed and Crown Rust and Mildew are problematic.

Flexity

0.5 – 1.0

+/-

+/-

Mildew prevention is critical. Flexity @ 0.5L/ha = 50% rate. Add Tern if Mildew present in crop. Increase rate depending on Mildew pressure. This is crucial with the variety, Barra.

Tern

0.75 - 1.0

Talius

0.15 - 0.25

+/-

+/-

Tern

0.3 - 0.6

Mildew prevention is critical. Talius @ 0.2L/ha = 80% rate. Add Tern if Mildew present in crop. Increase rate depending on Mildew pressure. This is crucial with the variety, Barra.

GENERAL COMMENTS 1. Rates should be adjusted depending on disease pressures and conditions. 2. T0 on Oats should be applied at GS 30-31 (1st node). 3. The T0 on Oats should be combined with the 1st PGR and herbicide. 4. Max overall total dose rate of Talius = 0.25 L/ha. Flexity can be used as an alternative at a rate of 0.5 L/ha for Mildew prevention. Max overall total dose rate of Flexity = 1.0 L/ha.

WINTER / SPRING OATS - PGR OPTIONS (GS 30 - 32) PRODUCT/TIMING

RATE (L/HA)

GS 30 - 31(1st Node) Moddus/Scitec

10.2 L/ha

+

1.0 L/ha

CeCeCe 75% / Holdup

+

GS 32 (2nd Node)

0.2 L/ha

Moddus/Scitec

+

+

1.0 L/ha

COMMENTS Use 0.2 L/ha Moddus/Scitec + 1.0 L/ha CeCeCe @ GS30 - 31. This is of critical importance to the variety Barra. Optimus can be used as an alternative to Moddus or Scitec.

Use 0.2 L/ha Moddus/Scitec + 1.0 L/ha CeCeCe @ GS31 - 32. The interval between the first and second PGR could be as close to a week in some cases.

CeCeCe 75% / Holdup GS 30 - 39

1.0 – 2.3 L/ha

2.3 L/ha = max single application dose rate. 1.4 L/ha = 868 g/ha CCC (Chlormequat). Good option at GS 37 / 39. Be conscious of Chlormequat loading throughout program due to residues.

0.2 - 0.32 Kg/ha

Medax Max @ 0.32 kg/ha = 25g Moddus + 15g Prohexadione. Works well in cool conditions.

Ceraide

GS 30 - 39 Medax Max

GENERAL COMMENTS 1. Growth regulation can be combined with the T1 fungicide. 2. Manganese should be included with these timings T0/1st PGR (GS 30 - 31), T1/2nd PGR (GS 31 - 32). 3. Be conscious of late applications of CCC (Chlormequat) due to residue detections. 4. Medax Max @ 0.2 - 0.5 Kg/ha can be used as a 3rd PGR up to GS 39.

16

GLANBIA IRELAND AGRONOMY UPDATE


OATS WINTER / SPRING OATS - HERBICIDE OPTIONS (GS 30 - 31) PRODUCT

RATE (L/HA)

Cameo Max

1 pack / (3 - 5/ha) +

+

0.65 - 1.0 L/ha

Galaxy

+/(0.2 L/ha)

COMMENTS (Galaxy = Boxer + Hurler + Clopyralid mix) This mix is more suited to Wexford or where resistant Corn Marigold is an issue. Rates depend on weed pressure at time of application. Max individual dose of Galaxy = 1.0 L/ha. For resistant Corn Marigold, mix with Gartrel @ 0.2 L/ha. 0.2 L/ha Gartrel = 40g/l Clopyralid. Excellent mix and will control Cleavers, Chickweed, Speedwell and Fumitory. Cameo Max and Ally Max are the only SUs cleared on Oats.

+/(Gartrel) Ally Max + Hurler

1 pack- (2 - 2.5/ha) +

Not as good on Fumitory as Cameo Max. Fluroxypyr will offer good control of cleavers. Rates depend on weed pressure at time of application.

0.65 - 1.0 L/ha Cameo Max + Hurler

1 pack- (3 - 5/ha) +

Better weed spectrum than above. Control’s most common weeds found in Oats. Rates depend on weed pressure at time of application.

0.65 - 1.0 L/ha

GENERAL COMMENTS 1. Rates should be adjusted depending on weed pressures and conditions. 2. Cameo Max and Ally Max are the only SU herbicides cleared on Oats. 3. Herbicides can be mixed with T0 and 1st PGR. Aim to apply between GS 30 - 32. 4. PGR / Fungicide / Herbicide / Trace Element mix can be hard on Oat crops. Delfan Plus @ 1.0 L/ha - 2.0 L/ha can be mixed with combined tank mix applications to help reduce stress on crop and aid crop recovery. 5. Manganese should be included with the above mix.

GLANBIA IRELAND AGRONOMY UPDATE

17


AGROCHEMICAL OPTIONS WINTER / SPRING OATS 2022

OATS WINTER / SPRING OATS - T1 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

Boogie

1.0 - 1.5

Boogie @ 1.0 L/ha = 66% Ptz + 66% Bixafen + 33% Spiroxamine. Talius @ 0.2 L/ha = 80% rate. Max overall total dose rate of Talius = 0.25 L/ha.

+/-

+/-

Talius

0.15 - 0.25

Decoy

0.5

Decoy @ 0.5 L/ha = 63% Proline + 50% F500.

+

+

Talius @ 0.2 L/ha = 80% rate. Add Tern if Mildew present in crop.

Comet

0.5

+/-

+/-

Talius

0.15 - 0.25

Elatus Era

0.5 - 0.8

+/-

+

Talius

0.15 - 0.25

Elatus Era @ 0.5 L/ha = 38% Proline + 50% Solatenol. Excellent Oat product. Excellent on Rust. Proline will also help on Mildew. Prothioconazole will also help on Mildew. Add Tern if Mildew present in crop.

GENERAL COMMENTS 1. Rates should be adjusted depending on disease pressure and conditions. 2. The T1 on Oats should be applied at GS 31-32 (2nd node). 3. The T1 on Oats can be combined with the 2nd PGR. 4. A holding spray between the T1 and T2 may be required. This will depend on weather conditions and if Rust or Mildew takes hold within crops. 5. Max overall dose rate of Boogie = 3.0 L/ha. 6. Max overall total dose rate of Talius = 0.25 L/ha. Flexity can be used as an alternative at a rate of 0.5 L/ha for Mildew prevention. Max overall total dose rate of Flexity = 1.0 L/ha. 7.

18

Manganese should be included at this timing if not already completed.

GLANBIA IRELAND AGRONOMY UPDATE


OATS WINTER / SPRING OATS - T2 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

Elatus Era

0.5 - 0.8

+/-

+

Talius

0.15 - 0.25

Decoy

0.4

COMMENTS Elatus Era @ 0.5 L/ha = 38% Proline + 50% Solatenol. Excellent Oat product and excellent on Rust. Proline will also help on Mildew. Elatus Era performed very well on Oat crops in 2018. Ideally suited to the T2 slot. Decoy @ 0.5 L/ha = 63% Proline. Priaxor @ 0.75 L/ha = 45% Xenium + 56% F500.

+

Excellent Oat product and excellent on Rust. Proline will also help on Mildew.

Priaxor

0.75

+/-Talius

0.15 - 0.25

Decoy

0.5

Decoy @ 0.5 L/ha = 63% Proline + 50% F500.

+

+

Excellent Oat product and excellent on Rust. Proline will also help on Mildew.

Comet

0.5

Will suit if SDHI used in T0/ T1 Timing.

+/-

+/-

Talius

0.15 – 0.25

GENERAL COMMENTS 1. Rates should be adjusted depending on disease pressure and conditions. 2. Sometimes it is advantageous to “split” the T2 head spray in order to manage head emergence. 3. T2 Oats should be applied at GS 52 - 59 (head emerging). 4. Max overall total dose rate of Talius = 0.25 L/ha. Flexity can be used as an alternative at a rate of 0.5 L/ha for Mildew prevention. Max overall total dose rate of Flexity = 1.0 L/ha. 5. Only 2 SDHI’s permitted on Oats. Only 2 application timings of Strobs permitted on Oats. 6. Only 1 application of Elatus Era per crop permitted. 7.

Mastercrop Final K @ 2.5 - 4.0 L/ha should be combined with T2 fungicide to help increase Kph levels.

The information provided is a guide only; always check product label before applying any pesticide.

GLANBIA IRELAND AGRONOMY UPDATE

19


Suggested Sowing Rates for SPRING Cereals

SPRING BARLEY

SPRING OATS

SPRING WHEAT

Aim to establish between 300 - 330 plants/m²

Aim to establish between 325 - 350 plants/m²

Aim to establish between 300 - 350 plants/m²

Suggested Spring Barley seed rates for 2022 SOWING DATE (WEEK)

4TH WEEK FEBRUARY

1ST WEEK MARCH

2ND WEEK MARCH

3RD WEEK MARCH

4TH WEEK MARCH

2ND WEEK APRIL

4TH WEEK APRIL

TARGET PLANTS M²

300

305

310

320

330

330

330

SOWING SEEDS M²

400

380

390

380

390

370

370

% ESTABLISHMENT

75%

80%

80%

85%

85%

90%

90%

Suggested Spring Oat seed rates for 2022 SOWING DATE (WEEK)

4TH WEEK FEBRUARY

1ST WEEK MARCH

2ND WEEK MARCH

3RD WEEK MARCH

4TH WEEK MARCH

2ND WEEK APRIL

4TH WEEK APRIL

TARGET PLANTS M²

325

325

335

335

340

345

350

SOWING SEEDS M²

430

410

420

395

400

385

390

% ESTABLISHMENT

75%

80%

80%

85%

85%

90%

90%

Suggested Spring Wheat seed rates for 2022 SOWING DATE (WEEK)

4TH WEEK FEBRUARY

1ST WEEK MARCH

2ND WEEK MARCH

3RD WEEK MARCH

4TH WEEK MARCH

1ST WEEK APRIL

2ND WEEK APRIL

TARGET PLANTS M²

300

310

320

330

340

350

350

SOWING SEEDS M²

400

388

400

390

400

390

390

% ESTABLISHMENT

75%

80%

80%

85%

85%

90%

90%

20

GLANBIA IRELAND AGRONOMY UPDATE


CEREAL SEEDING RATE CALCULATOR (Kg/ha)

Seeds / m2

THOUSAND GRAIN WEIGHT - GRAMS 32

34

36

38

40

42

44

46

48

50

52

54

56

58

60

62

50

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

75

24

26

27

29

30

32

33

35

36

38

39

41

42

44

45

47

100

32

34

36

38

40

42

44

46

48

50

52

54

56

58

60

62

125

40

43

45

48

50

53

55

58

60

63

65

68

70

73

75

78

150

48

51

54

57

60

63

66

69

72

75

78

81

84

87

90

93

175

56

59

63

67

70

74

77

81

84

88

91

95

98

101

105

109

200

64

68

72

76

80

84

88

92

96

100

104

108

112

116

120

124

225

72

77

81

86

90

95

99

104

108

113

117

122

126

131

135

139

250

80

85

90

95

100

105

110

115

120

125

130

135

140

145

150

155

275

88

94

99

105

110

116

121

127

132

138

143

149

154

160

165

171

300

96

102

108

114

120

126

132

138

144

150

156

162

168

174

180

186

325

104

111

117

124

130

137

143

150

156

163

169

176

182

189

195

202

350

112

119

126

133

140

147

154

161

168

175

182

189

196

203

210

217

375

120

128

135

143

150

158

165

173

180

188

195

203

210

218

225

233

400

128

136

144

152

160

168

176

184

192

200

208

216

224

232

240

248

425

136

145

153

162

170

179

187

196

204

213

221

230

238

247

255

264

450

144

153

162

171

180

189

198

207

216

225

234

243

252

261

270

279

475

152

162

171

181

190

200

209

219

228

238

247

257

266

275

285

294

500

160

170

180

190

200

210

220

230

240

250

260

270

280

290

300

310

GLANBIA IRELAND AGRONOMY UPDATE

21


Spring Cereal Recommended Lists 2022 SPRING WHEAT 2022 RECOMMENDED

AGRONOMIC & QUALITY CHARACTERISTICS*

PROVISIONALLY RECOMMENDED

HEXHAM

KWS TALISKER

KWS HELIUM

WPB DUNCAN

RELATIVE YIELD†

101

100

100

101

STRAW HEIGHT (cm)

69.3

73.1

73.4

67.2

RESISTANCE TO LODGING

7

5

(6)

(5)

EARLINESS OF RIPENING

5

5

(5)

(5)

MILDEW

5

6

(7)

(7)

SEPTORIA SPP.

5

6

(6)

(6)

YELLOW RUST

8

8

(5)

(8)

SPROUTING

7

7

(7)

(7)

11.5

11.5

12.0

11.2

RESISTANCE TO:

QUALITY: GRAIN PROTEIN CONTENT (%) HAGBERG FALLING NUMBER

280

253

236

315

1000 GRAIN WEIGHT (g)

48.2

48.0

49.3

44.3

HECTOLITRE WEIGHT (kg/hl)

77.3

77.8

79.9

78.2

HARDNESS INDEX

Hard

Hard

Hard

Hard

YEAR FIRST LISTED

2021

2020

2022

2022

* Based on trial results from 2019, 2020 and 2021. † Yields are expressed as a percentage of the yield of KWS Talisker. (100 = 8.25t/ha @ 15% moisture content). ‡ Based on results from 2018, 2019 and 2020.

SPRING OATS 2022 AGRONOMIC & QUALITY CHARACTERISTICS*

RECOMMENDED BARRA

HUSKY

WPB ISABEL

94

106

106

100.9

99.0

104.3

RESISTANCE TO LODGING

3

6

7

STRAW BREAKDOWN

4

5

8

EARLINESS OF RIPENING

6

8

6

MILDEW

3

5

5

CROWN RUST

4

4

5

1000 GRAIN WEIGHT (g)

37.8

39.5

42.0

KERNEL CONTENT (%)

73.4

73.1

73.0

RELATIVE YIELD† STRAW HEIGHT (cm)

RESISTANCE TO:

QUALITY:

HECTOLITRE WEIGHT (kg/hl)

57.3

56.8

58.6

YEAR FIRST LISTED

1985

2009

2019

* Based on trial results from 2019, 2020 and 2021. † Yields are expressed as a percentage of the mean of Barra and Husky. (100 = 7.40t/ha @ 15% moisture).

22

GLANBIA IRELAND AGRONOMY UPDATE


SPRING BARLEY 2022 AGRONOMIC & QUALITY CHARACTERISTICS*

RECOMMENDED

PROVISIONALLY RECOMMENDED

GANGWAY

RGT PLANET

SY ERRIGAL

GERALDINE

SKYWAY

SY AMITY

RELATIVE YIELD†

99

101

102

105

104

104

STRAW HEIGHT (cm)

77.1

74.3

73.8

72.1

76.1

75.8

RESISTANCE TO LODGING

6

5

7

(7)

(5)

(7)

STRAW BREAKDOWN

7

4

6

(6)

(5)

(6)

EARLINESS OF RIPENING

5

5

5

(6)

(5)

(5)

MILDEW

8

8

8

(8)

(8)

(8)

RHYNCHOSPORIUM

5

5

5

(7)

(7)

(6)

BROWN RUST

6

5

7

(7)

(7)

(7)

NET BLOTCH

8

5

8

(8)

(6)

(8)

RESISTANCE TO:

QUALITY: 1000 GRAIN WEIGHT (g)

47.5

49.1

48.7

49.2

49.1

52.5

HECTOLITRE WEIGHT (kg/hl)

68.1

65.6

65.4

66.1

66.6

66.5

SCREENINGS % (<2.2 mm)

1.4

1.7

1.4

1.4

1.2

1.0

GRAIN PROTEIN %

10.7

10.5

10.6

10.6

10.4

10.4

YEAR FIRST LISTED

2018

2017

2019

2022

2022

2022

* Based on trial results from 2019, 2020 and 2021. † Yields are expressed as a percentage of the mean of RGT Planet and Gangway. (100= 8.16 t/ha @ 15% moisture content).

GLANBIA IRELAND AGRONOMY UPDATE

23


AGROCHEMICAL OPTIONS - SPRING BARLEY 2022

BARLEY SPRING BARLEY - T1 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

(Decoy / Comet mix)

0.4 - 0.5

Decoy

0.4 - 0.5

+

+

Comet

0.4 - 0.5

+/Mirror/Arizona

1.25

Boogie

1.0 - 1.5

Decoy / Comet mix = 2.5L Decoy in Can 1 and 2.5L Comet in Can 2. Sold as one unit within the same box. Decoy @ 0.4 L/ha = 50% Prothio. Comet @ 0.4 L/ha = 40% F500. A very robust option where Net Blotch and Ryncho are an issue. Decoy is made from the very same formulation as Zephyr and Proline.

Boogie @ 1.0 L/ha = 66% Ptz + 66% Bixafen + 33% Spiroxamine Excellent option for Mildew prone varieties. High loading of triazole and SDHI.

+/Mirror/Arizona

1.25

Elatus Era

0.5 - 1.0

+/Mirror/Arizona

1.25

Zephyr

0.75

+/Swift

COMMENTS

0.25

Elatus Era @ 0.75 L/ha = 56% Proline + 75% Solatenol. Excellent option on Net Blotch and Ryncho. Performed well in 2018. Be conscious of SDHI loading throughout program. Zephyr @ 0.75 L/ha = 66% Proline + 26% Twist. Note; 0.75 L/ha is the max label rate for Zephyr - Swift = 100% Twist can be added to Zephyr to improve Net Blotch control on varieties with known weakness.

+/Mirror/Arizona

1.25

GENERAL COMMENTS 1. Rates should be adjusted depending on disease pressures and conditions. 2. T1 on Spring Barley should be applied at GS 25-31 (1st node). 3. For Mildew control add Tern @ 0.3 – 0.5 L/ha. Please be conscious of the 15 metre buffer zone associated with Tern and Winger. 4. For Mildew prevention add 0.15 - 0.25 L/ha Talius or 0.5 L/ha Flexity (will not control established mildew).

24

GLANBIA IRELAND AGRONOMY UPDATE


BARLEY SPRING BARLEY - HERBICIDE OPTIONS (GS 13 - 31) PRODUCT

RATE (L/HA)

Presite Max

1 pack / (2 - 4/ha)

+

+

Zypar

0.65 - 1.0 L/ha

Presite Max

1 pack / (2 - 4/ha)

+

+

Pixxaro

0.375 - 0.5 L/ha

Presite Max

1 pack / (2 - 4/ha)

+

+

Galaxy

0.65 - 1.0 L/ha

COMMENTS (Zypar = Boxer + Arylex mix) (Presite Max = Harmony Max) An excellent mix which will take almost all weeds. Rate depends on weed pressure at time of application. Very good on Vol beans. Can be mixed with Wild Oat herbicide, aphicide and T1 fungicide. This mix will take all weeds that Cameo Max will take. (Pixxaro = Hurler + Arylex mix) An excellent mix. Very good on Cleavers, Fumitory and Chickweed. The 2 Litre pack size and application rate may suit field sizes. Can be mixed with Wild Oat herbicide, aphicide and T1 fungicide. (Galaxy = Boxer + Hurler + Clopyralid mix) This mix is more suited to Wexford or where resistant Corn Marigold is an issue. Rates depend on weed pressure at time of application. Max individual dose of Galaxy = 1.0 L/ha. For resistant Corn Marigold, mix with Gartrel @ 0.2 L/ha. Gartrel @ 0.2 L/ha = 40g/l Clopyralid. Excellent mix and will control Cleavers, Chickweed and Speedwell. Presite Max can be swapped for Cameo Max where Fumitory is an issue.

Hiatus

1 pack- (3 - 5/ha)

+

+

Reaper / Hurler

0.65 - 1.0 L/ha

Cameo Max

1 pack- (3 - 5/ha)

+

+

Hurler / Reaper

0.65 - 1.0 L/ha

(Hiatus = Calibre) Hiatus has a very broad weed range. Excellent on Vol Potatoes, Fumitory and Speedwell. Not effective on resistant Corn Marigold. Can be mixed with Wild Oat herbicide, aphicide and T1 fungicide. Do not use Hiatus on Oats. A good option but weed spectrum narrower than the options above. Cameo Max has the advantage of controlling Fumitory but will not control resistant Corn Marigold and resistant Chickweed. Can be mixed with Wild Oat herbicide, aphicide and T1 fungicide.

GENERAL COMMENTS 1. Herbicide can be included with T1 fungicide, Wild Oat Herbicide and Aphicide. Do not mix Wild Oat herbicides with any CMPP or MCPA type products. Do not mix Wild Oat herbicide with Kinvara. 2. Presite Max can be swapped for Cameo Max and vice versa. 3. Rates should be adjusted depending on weed pressures and conditions. 4. Trace elements can be included at this timing. 5. Delfan Plus or Phylgreen @ 1.0 L/ha – 2.0 L/ha should be considered to help reduce stress and aid recovery of crops.

GLANBIA IRELAND AGRONOMY UPDATE

25


AGROCHEMICAL OPTIONS - SPRING BARLEY 2022

BARLEY SPRING BARLEY – WILD OAT OPTIONS (GS 13 – 39) PRODUCT

RATE (L/HA)

Axial Pro

0.5 – 0.82 L/ha

COMMENTS Axial Pro is the new formulation of Axial. It is a pre-formulated mix containing Axial and Adigor. 0.30 L/ha old form of Axial = 0.6 L/ha Axial Pro 0.25 L/ha old form of Axial = 0.5 L/ha Axial Pro 0.20 L/ha old form of Axial = 0.4 L/ha Axial Pro. If using Axial Pro at 0.4 L/ha, Adigor must be included at 1.0 L/ha. Do not mix Axial Pro with MCPA or CMPP based products. 0.82 L/ha rate required if targeting Canary Grass and Rye-Grass.

Foxtrot

Foxtrot is the same formulation as Cheetah Extra. Foxtrot should be used as a standalone application and should not be used as part of a multi-product tank mix.

0.68 – 1.0 L/ha

GENERAL COMMENTS 1. Herbicide can be included with T1 fungicide, Wild Oat Herbicide (Axial Pro only) and Aphicide. 2. Do not mix Axial Pro with MCPA and CMPP based products. 3. Axial Pro and Foxtrot are also cleared for use on Winter Barley, Winter Wheat and Spring Wheat. 4. Delfan Plus or Phylgreen @ 1.0 L/ha – 2.0 L/ha can be added to a combined T1 Fungicide, Herbicide, Wild Oat mix to reduce crop stress and help aid recovery.

SPRING BARLEY – APHICIDE OPTIONS ( GS 12 – 24) PRODUCT

RATE (L/HA)

Ninja / Karis / Karate / Sparviero

50 ml/ha

COMMENTS Ninja / Karis / Karate / Sparviero = 100 g/l Lambda. Aphicide should be applied to Spring Barley crops at the 2 - 3 leaf stage (GS 12 – 13) where the threat of BYDV is at its highest.

GENERAL COMMENTS 1. Same products and rates are also cleared for use on Spring Oats and Spring Wheat.

26

GLANBIA IRELAND AGRONOMY UPDATE


BARLEY SPRING BARLEY - PGR OPTIONS (GS 30 - 39) A ROBUST PGR PROGRAM WILL BE ESPECIALLY IMPORTANT WITH VARIETIES LIKE PLANET AND LAUREATE

PRODUCT/TIMING GS 30 - 32 Moddus OR Scitec +/-

RATE (L/HA)

COMMENTS Use 0.15 L/ha – 0.2 L/ha rate Moddus/Scitec @ GS 30/31.

0.1 - 0.2 L/ha

This is especially important for varieties like Planet and Laureate. Timing is critical for successful growth regulation. For tiller manipulation, CCC needs to be applied midtillering.

CeCeCe 75% / Holdup

+/1 - 1.25 L/ha

GS 29 – 41

0.2 – 0.32 Kg/ha

Medax Max @ 0.32 Kg/ha = 25g Moddus + 15g Prohexadione. Works well in cool conditions.

0.8 – 1.0 L/ha

This should be considered as a final option. Optimum timing @ GS 32 – GS 37. Care needs to be taken when applying Terpal to Spring Barley as it can be hard. Be very careful not to get caught with awns emerging.

Medax Max

GS 32 – 39 Terpal

GENERAL COMMENTS 1. Growth Regulation can be combined with the T1 Fungicide. 2. Be careful when mixing with Wild Oat Herbicides or BLW Herbicides as these can heat up mix. 3. Follow up PGR of Terpal / Medax Max, should be applied between growth stages 32 – 37 if lodging pressure high. 4. Max total dose of Medax Max on Spring Barley = 0.75 Kg/ha up to GS 39. 5. Max total dose of Terpal on Spring Barley = 1.5 L/ha up to GS 49. Be careful not to apply if awns emerging.

SPRING BARLEY – T2 FUNGICIDE OPTIONS PRODUCT

RATE (L/HA)

(Barley Pack Ultra)

COMMENTS Barley Pack Ultra = 5L Priaxor in Can 1 and to 2.5L Decoy in Can 2. Sold together in the same box.

Priaxor

0.75 + 0.75

+

+

Decoy

0.4

+/-

+/-

Mirror/Arizona

1.25

Revystar

1.5

+/-

+/-

Mirror/Arizona

1.25

Elatus Era

0.65 - 1.0

+/-

+/-

Mirror/Arizona

1.25

Boogie

1.0-1.5

Boogie @ 1.0 L/ha = 66% Ptz + 66% Bixafen + 33% Spiroxamine.

+/-

+/-

Excellent option for Mildew prone varieties. High loading of triazole and SDHI.

Mirror/Arizona

1.25

Priaxor @ 0.75 L/ha = 45% Xenium + 56% F500. Decoy @ 0.5 L/ha = 63% Proline. Excellent all round fungicide with excellent straw characteristics. 15 acre - 20 acre pack, rate depending.

Revystar @ 1.5 = 100% Mefentrifluconazole and 60% Xenium. An excellent option for Ramularia control. Xenium is a proven performer on Rhynco and Not Blotch.

Elatus Era @ 1.0 L/ha = 75% Proline + 100% Solatenol. Strong and robust option on Ryncho. Performed well over the last two seasons.

GENERAL COMMENTS 1. For Mildew control add Tern @ 0.3 – 0.5 L/ha. 15 metre buffer zone applies to Tern. 2. Max overall total dose rate of Talius = 0.25 L/ha. Flexity can be used as an alternative at a rate of 0.5 L/ha for Mildew prevention. Max overall total dose rate of Flexity = 1.0 L/ha. 3. Be careful not to exceed max total overall doses of specific products throughout program. 4. Only 2 SDHI’s permitted on Barley. Only 2 applications of Strobs permitted on Barley. 5. Arizona/Mirror should be included at T3 on all varieties to protect against Ramularia. 6. T2 on Spring Barley should be applied at GS 39 - 49 (awns emerging).

GLANBIA IRELAND AGRONOMY UPDATE

27


PRODUCTS FOR DISEASE CONTROL IN TILLAGE CROPS

PRODUCT

PCS NO.

ACTIVE INGREDIENTS

APPROVED CROPS

RATE/HA

MAX TOTAL DOSE

LATEST TIMING

AMISTAR

05072

Azoxystrobin 250 g/l

W, B, O, OSR, R, T, Peas, Carrots, Bns, Pot

0.8-1 l/ha

Depends on crop see label

W - GS 71; B,O - GS 61. For others see label

ARIZONA

04555

Folpet 500g/l

W,B, T

1.5l/ha

3.0l/ha

GS 59

ASCRA XPRO

05240

Bixafen 65 g/l + Fluopyram 65 g/l + Prothioconazole 130 g/l

W

1.5 l/ha

2 applications per crop

GS 61

BONTIMA

05033

Isopyrazam 62.5 g/l + Cyprodinil 187.5 g/l

B

1.6-2.0 l/ha

4.0 l/ha

Before GS 61

BOOGIE

05256

Bixafen 65 g/l + Fluopyram 65 g/l + Prothioconazole 130 g/l

W, B, O

1.5 l/ha

2 applications per crop

GS 61

CARYX

06704

Mepiquat Chloroide 210g/l + Metconazole 30g/l

O

0.7-1.4L/ha

1.4/ha

GS 59 (Yellow Bud)

COMET 200

03696

Pyraclostrobin 200g/l

W, B, O

1.25 l/ha

2 applications per crop

W -Before GS 71; B,0 - GS 59

ELATUS ERA

05379

Benzovindiflupyr 75 g/l Prothioconazole 150 g/l

W, B, O, T, R

1.0 l/ha

1 application per crop

W, T, R - GS 69

ELATUS PLUS PLEXEO 60

05380 + 05926

Benzovindiflupyr 100 g/l + Metconazole 60g/l

W,B,

0.75 l/ha + 1.5 l/ha

0.75l/ha( Elatus) 3 l/ha(Plexeo)

W -before GS 69, B before GS 59

FILAN

04325

Boscalid 500 g/l

OSR

0.5 kg/ha

1.0 kg/ha

GS 76; OSR 60% Pods at final size

FLEXITY

03225

Metrofenone 300 g/l

W, B, O, R, T

0.5 l/ha

1.0 l/ha

GS 61; Malting Barley - GS 49

GLOBAZTAR

05529

Azozystrobin 250 g/l

W, B, O, Pot, Peas

1.0 l/ha

2.0 l/ha

W, B, O - Before GS73

28

GLANBIA IRELAND AGRONOMY UPDATE

B, O - GS 59


PRODUCT

PCS NO.

ACTIVE INGREDIENTS

APPROVED CROPS

RATE/HA

MAX TOTAL DOSE

LATEST TIMING

JADE

06283

Prothioconazole 125 g/l + Tebuconazole 125 g/l

W, B, O, R, T, OSR

1.0 l/ha

W - 3.6 l/ha; B - 2.4 l/ha; O OSR 2.O l/ha

W - GS 71; B - GS 61

JUVENTUS

05780

Metconazole 90 g/l

W, B, R, T, OSR

1.0 l/ha; OSR 0.8 l/ha

2.0 l/ha; OSR 1.6 l/ha

GS 71; OSR 10% 0f pods at final size

KAYAK

05476

Cyprodinil 300 g/l

B

1.5 l/ha

2 applications per crop

GS 49

LATITUDE

02226

Silthiofam 125 g/l

W, B, T

LENTYMA

06412

Mefentifluconazole 100 g/l + Fluxapyroxad 50 g/l

LIBRAX

04968

Metconazole 45 g/l + Fluxapyroxad 62.5 g/l

MASTERCROP BARLEYPACK ULTRA; PRIAXOR + DECOY

05264 + 06221

MIRROR

Barley - 2.0 l/t Wheat - 3.0 l/t

Seed dressing

W,B, R, T

2.0 l/ha

4.0 l/ha

GS 71

Fluxapyroxad 75 g/l + Pyraclostrobin 150 g/l Prothioconazole 250 g/l

B

1.5 l/ha

2 applications per crop

GS-71

B

1.5 l/ha

2 applications per crop

GS-59

06425

Folpet 500g/l

W,B, T

1.5l/ha

3.0l/ha

GS 59

PEACOQ + PONTOON

06752 + 06681

Fenpicoxamid 50g/l

W

2.0 l/ha

1 application per crop

PROLINE

03786

Prothioconazole 250 g/l

W, B, O, OSR

Cereals 0.6 - 0.8l/ ha OSR 0.7 l/ha

W - 2.4 l/ha; B O - 1.6 l/ha; OSR 1.4 l/ha

W - GS 71; B - GS 61

PROSARO

04641

Prothioconazole 125 g/l + Tebuconazole 125 g/l

W, B, O, R, T, OSR

1.0 l/ha

W - 3.6 l/ha; B - 2.4 l/ha; O OSR 2.O l/ha

W - GS 71; B - GS 61

GLANBIA IRELAND AGRONOMY UPDATE

29


PRODUCTS FOR DISEASE CONTROL - CONTINUED

PRODUCT

PCS NO.

ACTIVE INGREDIENTS

APPROVED CROPS

RATE/HA

MAX TOTAL DOSE

LATEST TIMING

REVYSTAR

06411

Mefentifluconazole 100 g/l + Fluxapyroxad 50 g/l

W,B,

1.5l/ha

3.0l/ha

GS 59

TEBUCUR 250 EW

04827

Tebuconazole 250 g/l

W, B, O, OSR, Bns, Veg

1.5 l/ha

SCORE 250 EC

04566

Difenoconazole 250 g/l

OSR (see label for other crops)

0.3 - 0.5 l/ha

1 l/ha

OSR - Before GS 69

SIGNUM

03799

Boscalid 26.7 g/kg + Pyraclostrobin 6.7 g/kg

Veg, Bns

1.0 - 1.8 kg/ha depending on crop

See label

See label

SILTRA XPRO

05257

Bixafen 60 g/l + Prothioconazole 200 g/l

B, O

0.6 - 1.0 l/ha

2.0 l/ha

GS 61

Metconazole 60 g/l

W, B, R, T, OSR

1.0 l/ha; OSR 0.8 l/ha

2.0 l/ha; OSR 1.6 l/ha

GS 71; OSR 10% 0f pods at final size

SIRENA

See label

TALIUS

04604

Proquinazid 200 g/l

W, B, O, R, T

0.15 - 0.25 l/ha

0.25 l/ha

W - GS 65; B, O, R, T - GS 49

TERN 750 EC

04305

Fenpropidin 750 g/l

W, B, O

0.5 l/ha

1.0 l/ha

Before GS 61

TRINITY

06569

Prothioconazole 250 g/l

W, B, O, OSR

Cereals 0.6 - 0.8l/ ha OSR 0.7 l/ha

W - 2.4 l/ha; B O - 1.6 l/ha; OSR 1.4 l/ha

W - GS 71; B - GS 61

WINGER

05807

Fenpropidin 750 g/l

W, B, O

0.5 l/ha

1.0 l/ha

Before GS 61

ZEPHYR

03792

Prothioconazole 175 g/l + trifloxystrobin 88 g/l

B

0.75 l/ha

1.5 l/ha

GS 61

ZOXIS

05348

Azoxystrobin 250 g/l

W, B, O, R, T, Pot, Carrots

0.8-1.0 l/ha

Depends on crop see label

W, B, O - GS 71; Others check label

W = winter and spring wheat; WW = winter wheat; SW = spring wheat; B = winter and spring barley; SB = spring barley; WB = winter barley; O = winter and spring oats; WO = winter oats; S0 = spring oats; Bt = beet; OSR = Winter and spring oilseed rape; WOSR = winter oilseed rape; SOSR = Spring oilseed rape; Bns = Beans; Pot = Potatoes; Mz = Maize; T = Triticale; R = Rye; Lin = Linseed. R = Rye; T = Triticale

The information provided is a guide only; always check product label before applying any pesticide.

30

GLANBIA IRELAND AGRONOMY UPDATE


ELATUS Era ™

ONE PRODUCT, EXCEPTIONAL PERFORMANCE, FOUR KEY CROPS

Tried and tested under Irish conditions, ELATUS Era, a combination of SDHI and prothioconazole, delivers powerful, consistent performance every time. Find out more at syngenta.ie/elatus-era

Ba r

le

y

Wh ea

t

Broad spectrum disease control, high yields and top quality are the hallmarks of ELATUS Era on wheat, barley, oats and now field beans.

Oa

ts

Field Beans

Syngenta Ireland Ltd. Block 6, Cleaboy Business Park, Old Kilmeaden Road, Waterford. Tel: 051 377203 Fax: 051 354748 Email: cropsales.ie@syngenta.com Web: www.syngenta.ie ELATUS™ Era is a trademark of a Syngenta Group Company. ELATUS Era (PCS 05379) contains benzovindiflupyr and prothioconazole. Use plant protection products safely. Always read the label and product information before use. PAY ATTENTION TO THE RISK INDICATIONS AND FOLLOW THE SAFETY PRECAUTIONS ON THE LABEL. ©Syngenta AG March 2022. GQ11959.


HERBICIDES FOR BROAD-LEAVED WEED CONTROL IN CEREALS PRODUCT

PCS NO

ACTIVE INGREDIENT

CROP

ALISTER FLEX

05183

120 g/l Diflufenican, 9 g/l Mesosulfuronmethyl, 7.5 g/l Iodosulfuronmethylsodium

Winter Wheat Only

BARCLAY HURLER

05077

200 g/l Fluroxypyr

TIMING

RATE/HA

COMMENTS

Up until GS 29

1.0 l/ha

New Formulation, Improved activity on broad-leaved weeds (BLW), good on grass weeds and wild oats.

Wheat, Oats, Barley

Wheat and Barley GS 12-39; Oats GS 12-31

0.75L/ha

Very good on Cleavers, Vol. Potato, a good follow up for S.U Resistant Chickweed.

BROADWAY STAR

05582

7.1% w/w Pyroxsulam, 7.1% Cloquintocetmexyl, 1.4% w/w Florasulam

Winter Wheat Only

GS 11-32

265g/ha (pack/4ha)

Very good on bromes, wild oats and grass weeds. Does not control AMG. Controls a wide range of BLW.

DEFY ROXY

04277 05739

800 g/l Prosulfocarb

W Wheat W Barley

Up until GS 21

2.0 l/ha

Apply with DFF (0.1L/ha) for best results. Use as a pre-em on Winter Barley.

DIFLANIL 500, STRIDE DFF, HURICANE

04358 05000 04357

500 g/l Diflufenican

W&S Wheat W&S Barley W&S Oats

Up until GS 30

0.25 l/ha 0.125 l/ha S Barley

BLW only. No Grassweed control.

DUPLOSAN KV

02842

600 g/l Mecoprop-P

Wheat, Barley, Winter Oats

Winter GS 12-32, Spring GS 12-30

1.5 l/ha with SU partner

Soil temperature above 8°C for best results.

FIREBIRD NAVIGATE

04221 05667

400g /l Flufenacet, 200g/l Diflufenican

W Wheat, W Barley

B GS 23, W GS 24

0.3 l/ha, 0.6l/ha max total

Very good residual activity on AMG and grass weeds.

FENCE

05873

480g/l Flufenecat

W Wheat, W Barley

Up until GS 22

0.5L/ha

Very good residual activity on AMG and grass weeds.

FLIGHT

02524

330 g/l Pendimethalin, 7.5 g/l Picolinafen

W Wheat, W Barley

Up until GS 30

4.0 l/ha

Best results when applied pre-emergence.

GALAXY

05473

100 g/l Fluroxypyr, 2.5 g/l Florasulam, 80 g/l Clopyralid

Wheat, Oats, Barley

GS 13-39

1.0 l/ha max rate, 0.75 l/ha SU mixer rate

Very good on Resistant Chickweed,Marigold and thistles.

GARTREL

05583

300 g/l Clopyralid, 25 g/l Florasulam

Wheat, Oats, Barley, Triticale, Rye

GS 13 - 39

0.2 l/ha max rate

Ideal to partner with Galaxy when targeting resistant Corn Marigold.

HIATUS

06322

150 g/kg Tribenuronmethyl, 400 g/kg Thifensulfuron-methyl

Wheat, Oats, Barley, Triticale, Rye

GS 13 - 39

100g/ha (pack/5ha)

Cailbre tyoe mix. Wide BLW spectrum

LECTOR

04818

50g/l Florasulam

Wheat, Oats, Barley, Triticale

GS 13-39

150ml/Ha Max Rate

Useful for early season clean up of BLW such as vol. beans, vol. OSR in winter cereals.

MASTERCROP MCPA 50 NU 46

05510 05501

500 g/l MCPA

Wheat, Oats, Barley

GS 15-31

2.0l/ha SU mixer rate

Good tank mix partner with S.U.

32

GLANBIA IRELAND AGRONOMY UPDATE


PRODUCT

PCS NO

ACTIVE INGREDIENT

CROP

TIMING

RATE/HA

COMMENTS

MONOLITH

05868

45g/kg Mesosulfuronmethyl 67.5g/kg Propoxycarbazonesodium

Winter Wheat, Triticale, Rye

Up Until GS 33

0.2 - 0.33kg/ Ha

Good on bromes, wild oats and grass weeds.

MOST MICRO

04837

365 g/l Pendimethalin

W Wheat, W Barley, S Barley, Triticale

Until GS 30 of crop but ideal to apply pre-em

3.6 l/ha max total dose rate

For best results, Most Micro should be applied pre-em.

PACIFICA PLUS

05537

30 g/kg Mesosulfuronmethyl, 10 g/kg Iodosulfuronmethylsodium, 50g/kg Amidosulfuron

1st Feb to GS 39

300 - 500 g/ha

Good on bromes, wild oats and grass weeds. New formulation has good activity on cleavers.

05525

280 g/l Fluroxypyr 12 g/l Halauxifenmethyl

W & S Wheat W & S Barley

GS 13-45

0.5 l/ha

Good control of Fat Hen, Poppy, fumitory, cleavers and chickweed. Not cleared on Oats. Can be used in cold temps.

PONTOS

05434

240g/l Flufenacat 100g/l Picolinafen

W Wheat W Barley W Rye W Triticale

Up until GS 30 (Lower Rate)

1.0l/Ha Pre Em 0.5L/Ha Post Em until GS 30

Best used Pre Emergence, Good activity on AMG and BLW.

TOWER

05425

40 g/l Diflufenican, 300 g/l Pendimethalin, 250 g/l Chlorotoluron

W&S Wheat, W&S Barley

Up until GS 30

2.0 l/ha

Good residual activity on AMG and BLW.

ZYPAR

05800

6.25g/l Halauxifenmethyl 5g/l Florasulam

Wheat, Barley, Rye, Triticale

Up Until GS 45

1.0L/Ha

Useful option for BLW clean up in winter cereals or BLW control in spring crops. Can be used in cold temps.

ALLY MAX SX

03435

143 g/kg Metsulfuronmethyl, 143 g/kg Tribenuronmethyl

Wheat, Oats, Barley

GS 12/13-39

42g/ha (pack/2ha)

100% Ally + 40% Cameo.

BIPLAY SX

03434

111 g/kg Metsulfuronmethyl, 222g/kg Tribenuron-methyl

Wheat, Oats, Barley

GS 13-39

45g/ha (pack/3ha)

83% Ally + 66% Cameo. Add CMPP for Fumitory and Fat hen.

CAMEO MAX SX

03135

250 g/kg Tribenuronmethyl, 250 g/kg Thifensulfuronmethyl

Wheat, Oats, Barley

GS 13-39

60g/ha (pack/3ha)

100% Cameo +38% Harmony. Wide spectrum, good on fumitory.

PRESITE MAX SX HARMONY MAX SX

04342 02883

429 g/kg Thifensulfuronmethyl & 29 g/kg Metsulfuronmethyl

Wheat, Barley

GS 13-39

140 g/ha

Wide BLW spectrum, good on knotgrass.

HIATUS

06322

400g/kg Thifensulfuronmetyl & 150g/kg Tribenuron-methyl

Wheat, Barley, Rye, Triticale

Up until GS39

100g/ha (pack/5ha)

Good on advanced weeds. Useful on fumitory, grounsel, vol OSR, Bindweed, cleavers. Same as Calibre.

TAXI

06450

500 g/kg Tribenuronmethyl

Wheat, Barley, Oats, Rye, Triticale

Up until GS 39

30 g/kg

100% Cameo. Useful for grounsel, charlock, Vol OSR.

PIXXARO

Winter Wheat Only

The information provided is a guide only; always check product label before applying any pesticide.

GLANBIA IRELAND AGRONOMY UPDATE

33


HERBICIDES FOR WILD OAT CONTROL IN CEREALS PRODUCT

AXIAL PRO

FOXTROT EW

PCS NO

06258

03858

ACTIVE INGREDIENT

Pinoxaden 55 g/l

69 g/l Fenoxaprop-Pethyl

CROP

TIMING

RATE/HA

COMMENTS Also controls Ryegrass and Canary grass. Check label rates for these. Do not mix hormone herbicides. A 21 day interval must be left between application of hormones and/ or SUs and the following Axial PRO.

Also controls Rough- Stalked Meadowgrass and awned canary grass. Foxtrot should be applied on its own.

W & S Wheat W & S Barley

gs12-41

0.6 l/ha for wild oats. Can be mixed with SUs when used at 0.6L/ha.

W & S Wheat W & S Barley

From emergence to flag leaf fully emerged gs39

0.68 - 1.2 l/ ha. Use higher rate as growth stage of wild oat advances.

INSECTICIDES FOR PEST CONTROL IN CEREAL CROPS PRODUCT

PCS NO.

ACTIVE INGREDIENTS

APPROVED CROPS

TIMING

RATE/HA

COMMENTS

DECIS PROTECH EC

02693

25 g/l Deltamethrin

Wheat, Oat, Barley

Up until ] GS 83

0.17 - 0.2 L/ha

Can be used right up to harvest.

SUMI-ALPHA

02334

25 g/l Esfenvalerate

Wheat, Oat, Barley

Up to 31st March or GS 73/77

0.165 - 0.2 L/ha (depends on timing)

Latest application timing depends on “winter use” or “summer use” and whether crop is winter or spring. Check label for exact details.

NINJA KARATE ZEON SPARVIERO KARIS 10 CS

05178

100 g/l Lambdacyhalothrin

Wheat, Oat, Barley

Up until GS 77 on Wheat and Barley. Up until GS 71 on Oat

50 mL/ha

Maximum of 4 applications per crop (200 mL/ha).

04084 04469 04454

IRONMAX PRO

06513

24.2 g/kg Ferric Phosphate

All Crops

When infestation visible or expected.

7 kg/ha. Maximum total dose of 28 kg/ ha.

Check label for different crops

METAREX INVO

04852

4% Metaldehyde

All crops (see label)

Cereals: before GS 29 OSR: before GS 17

5 Kg/ha. Maximum total dose of 17.5 Kg/ha

Latest time of application for potatoes is 7 days before harvest.

LIMA GOLD

04961

5% Metaldehyde

All crops (see label)

Cereals before GS 29 OSR: before GS 29

4 Kg/ha. Maximum total dose of 12.0 Kg/ha

SLUXX HP

05557

29.7 g/kg Ferric Phosphate

All crops

When infestation visible or expected

7 Kg/ha. Maximum total dose of 28 Kg/ha

34

GLANBIA IRELAND AGRONOMY UPDATE


Boost your barley yields with the power of SiltraXpro

Siltra Xpro contains the special power of bixafen - so you can rely on it to deliver all the superior disease control and quality yields you’re looking for. •

A powerful combination of the two best ‘actives’ to combat the main barley diseases.

All the additional application benefits of the Leafshield formulation system.

SiltraXpro contains prothioconazole and bixafen and is a registered Trade Mark of Bayer. Use plant protection products safely. Always read the label and product information before use. Pay attention to the risk indications and follow the safety precautions on the label. For further information, please visit www.bayercropscience.ie or call Bayer Assist on 1800 818 534. © Bayer CropScience Limited 2017. Triple rinse containers at time of use, puncture and invert to dry.

@Bayer4CropsIE

www.bayercropscience.ie


CEREAL PLANT GROWTH REGULATORS PRODUCT

CECECE 750, HOLDUP

CERAIDE

K2

PCS NO

ACTIVE INGREDIENT

CROP

TIMING

RATE/HA

COMMENTS

04736 04743

750 g/l Chlormequat Chloride

W Wheat S Wheat W & S Oats W Barley S Barley

gs 23-31 gs 23-31 gs 32 gs 22-30 gs 25-30

2.0 l/ha 1.25 l/ha 2.0 l/ha 2.0 l/ha 1.5 l/ha

Apply above 8°C. Where temperatures are below 8°C, include a penetrant oil. Apply CeCeCe to increase tillering during early growth stages. Add a nonionic wetter at 0.025% spray volume for Oats.

04741

620 g/l Chlormequat Chloride + metabolic adjuvants

W Wheat S Wheat W Barley S Barley S & W Oats

up to gs 39 up to gs 39 up to gs 39 up to gs 14 up to gs 39

1.8 l/ha 0.9 l/ha 2.3 l/ha 1.25 l/ha 2.3 l/ha

Two applications of 1.15 l/ha can be made on Oats but max individual application of 1.4 l/ha.

620 g/l Chlormequat + metabolic adjuvants

W Wheat S Wheat W Barley S Barley S & W Oats

up to gs 39 up to gs 39 up to gs 39 up to gs 14 up to gs 39

1.8 l/ha 0.9 l/ha 2.3 l/ha 1.25 l/ha 2.3 l/ha

No need to include adjuvant. Do not mix with carfentrazone products.

50 g/kg Prohexadione + 75 g/kg Trinexapacethyl

W&S Wheat W&S Barley W & S Oats Rye Triticale

Winter Crops gs 29-49 (except oats) Spring Crops and Oats gs 29-39

Depends on crop, timing and if mixed with CeCeCe. See label

Best results on actively growing crop. Do not tank mix with herbicides on oats.

250 g/l Trinexapac-ethyl

W Wheat S Wheat W Barley S Barley W & S Oats

gs 30-39 gs 30-31 gs 30-39 gs 30-32 gs 30-31

0.4 l/ha 0.4 l/ha 0.4 -0.6 l/ha 0.3 l/ha 0.4 l/ha

Typical Moddus mix is 0.2 l/ha Moddus + 1.0 l/ha CCC75%.

gs 30-32 gs 30-32 gs 30- 39 gs 30-31

0.6 l/ha 0.7 l/ha 0.6 l/ha 0.6 l/ha

Can also be used on Winter Barley at 0.9l/ ha between gs37-39 provided no other application has been made.

1.0 l/ha 0.5 l/ha 0.75 l/ha

Do not apply to crop if under stress, especially spring barley which may develop secondary tillers.

04742

MEDAX MAX

MODDUS, SCITEC

05507

03849, 06071

OPTIMUS

04704

175 g/l Trinexapac ethyl

W Barley S Barley W Wheat W&S Oats

PADAWAN

04814

480 g/l 2-Chloroethylphosphonic acid

W Barley S Barley W Wheat

gs 32-39 gs 32-49 gs 37- 45

03933

480 g/l 2-Chloroethylphosphonic acid

W Barley W Wheat

gs 32-49 gs 37-47 (Optimum timing is gs 37 for Wheat and gs 37 for Barley)

1.0 l/ha 0.75 l/ha

Add Cerone to tank last in spray mixes. Do not spray crops where the leaf sheaths have split and ears are visible. Do not apply to crop if under severe stress. Do not apply Cerone to straw destined for the mushroom trade.

04419

155 g/l 2-Chloroethylphosphonic acid, 305 g/l Mepiquat Chloride.

W Wheat S Wheat W Barley S Barley

gs 32-39 gs 32-39 gs 32-39 gs 32-39 (Optimum timing is gs32-37)

2.0 l/ha 1.5 l/ha 2.0 l/ha 1.5 l/ha

In Wheat, after previous application of CeCeCe, apply Terpal at a rate of 0.75-1.5 l/ha. Applications of Terpal at the later stage up to first awn emergence, should be made in W Barley with only 1.5 l/ha of Terpal. Add Terpal to tank first in spray mixes. Do not apply Terpal to straw destined for the mushroom trade.

CERONE

TERPAL

The information provided is a guide only; always check product label before applying any pesticide.

36

GLANBIA IRELAND AGRONOMY UPDATE


INSECTICIDES FOR PEST CONTROL IN CEREAL CROPS PRODUCT

PCS NO.

ACTIVE INGREDIENTS

CROPS

TIMING

RATE/HA

COMMENTS

DECIS PROTECH EC

05269

15 g/l Deltamethrin

Wheat, Oats, Barley

Up until gs83

0.42 l/ha

Max 2 applications per crop

SUMI-ALPHA

02334

25 g/l Esfenvalerate

Wheat, Oats, Barley

Up to 31st March or gs 73/77

0.165 - 0.2 l/ ha (depends on timing)

Latest application timing depends on "winter use" or "summer use" and whether crop is winter or spring. Check label for exact details.

NINJA KARATE ZEON SPARVIERO KARIS 10 CS

05178

100 g/l Lambdacyhalothrin

Wheat, Oat, Barley

Up until gs77 on Wheat and Barley. Up until gs71 on Oats.

50 mL/ha

Maximum of 4 applications per crop (200 mL/ha).

IRONMAX PRO

06513

24.2 g/kg Ferric Phosphate

All Crops

When infestation visible or expected.

7 kg/ha. Maximum total dose of 28 kg/ ha.

Check label for different crops

METAREX INOV

04852

4% Metaldehyde

All crops (see label)

Cereals: before GS 29 OSR: before GS 17

5 kg/ha. Maximum total dose of 17.5 kg/ha.

Latest time of application for potatoes is 7 days before harvest.

LIMA GOLD

04961

5% Metaldehyde

All crops (see label)

Cereals: before GS 29 OSR: before GS 29

4 Kg/ha. Maximum total dose of 12.0 Kg/ha

SLUXX HP

05557

29.7 g/kg Ferric Phosphate

All crops

When infestation visible or expected

7 Kg/ha. Maximum total dose of 28 Kg/ha

04084 04469 04454

The information provided is a guide only; always check product label before applying any pesticide.

GLANBIA IRELAND AGRONOMY UPDATE

37


Oil Seed Rape Canopy Management Written by Jayne Smyth

Green Area Index is the ratio of green leaf and stem area to the area of ground on which the crop is growing. GAI will vary from crop to crop (and within crops) depending on sowing date, available nitrogen and grazing by pigeons. Assessment of the Green Area Index will guide when and how nitrogen should be applied.

The following points should be considered:

• A target canopy cover of GAI 3.5 at the start of flowering to deliver maximum yield this should equate to between 6,000 and 8,000 pods per square metre.

• Nitrogen has a large influence on the canopy size. • It requires 175 kg/ha N (from a combination of soil N

release, canopy accumulations and applied nitrogen) to achieve GAI 3.5 by flowering.

• Start nitrogen (and sulphur) application on thin/grazed crops as soon as growth commences in spring.

• Hold back 35-60 kg N/ha in all crops to be spread as

near as practically possible to mid-flowering. This is to prolong green-leaf area during pod-fill. Leaves are the most efficient part of the rape plant to convert sunlight into yield.

• For each 0.5 t/ha of yield above 3.5 t/ha up to a maximum of 5 t/ha the crops needs 30 kg/ha of Nitrogen.

• Fungicides with growth regulation properties can be used to manipulate crop growth habit (and control disease) but check GAI before application.

38

GLANBIA IRELAND AGRONOMY UPDATE

GAI = Ground Area Index and is a measure of how much green plant material is in a crop. It can be measured by weight (best suited to wide row spacing’s*) or by digital photograph (best suited to narrow row spacing’s). Download the OSR GAI app from the app store onto your smart phone and it will calculate the GAI from the photograph.

If you don’t have a smart phone you can still measure the GAI by following the steps below. *Measuring GAI with wide row spacing’s. 1. Cut all plants from a meter row. 2. Weigh the fresh weight collected in kilos. 3. Divide the weights by 0.61 (for 24 inch spaced crop) to take into account the row spacing. 4. Multiply the final figure by 0.8 to get the GAI of the OSR crop.


Importance Soil-borne diseases, such as sclerotinia stem rot, clubroot and verticillium wilt (also known as verticillium stem stripe), have increased in recent years, favoured by shorter rotations. Sclerotinia stem rot is usually the main disease to consider at flowering. The disease often causes little damage but can halve yields when severe. It also poses a threat to other broad-leaved crops in the rotation.

Sclerotinia in Oil Seed Rape Sclerotinia stem rot is usually the main disease to consider during the flowering stages of oilseed rape. Although the infection cycle of Sclerotinia sclerotiorum is complex, a good understanding of the three main risk factors – the presence of sclerotinia inoculum, warm and humid weather conditions and crops in flower – will help you target control.

Symptoms The pathogen that causes sclerotinia (Sclerotinia sclerotiorum) in oilseed rape can also infect other crops, such as potatoes, peas, carrots and many other vegetables. In oilseed rape, when lower main stems are infected, white stem lesions form with black sclerotia within the stem cavity. Infection can cut off the supply of food and water to the canopy. In extreme situations, whole plants can be lost. If infection occurs during later flowering, infection tends to be limited to the lateral branches with a much less damaging effect on yield.

Life cycle Sclerotinia in oilseed rape is caused by the fungal pathogen Sclerotinia sclerotiorum. The infection cycle is complex and requires three main factors: the presence of sclerotinia inoculum, warm and humid weather conditions and crops in flower. In spring, sclerotinia fungal resting bodies (sclerotia) in the soil germinate. This usually occurs when soils are moist and warm (>10°C). Pale brown fruiting bodies (apothecia) are then produced that release airborne ascospores. These spores land on oilseed rape petals and stick to other plant surfaces (especially if there is light rain). The spores require external nutrients, derived from petals and pollen, to enable them to germinate and infect the plant. Plant infection also requires long periods of high humidity and night-time temperatures above 7°C. Sclerotinia spreads from leaf lesions to the stem. Stem lesions increase in size, girdling the stem resulting in premature ripening and weakening stems. Eventually, stems can lodge. New sclerotia are formed within the stem cavity and roots. These are often returned to soil at harvest.

Risk factors

• Rotations (short rotations, especially those that include other susceptible crop hosts increase the risk)

• A history of previous sclerotinia infection on-farm • Favourable weather (e.g. mild day and night temperatures with light rain or dew)

• • • •

Crop growth stage (crop in flower) Presence of sclerotinia inoculum Germination activity of sclerotia ungicide choice and timing (protectant fungicides need F to be applied before infection to achieve good control)

Management It may be necessary to extend rotations at sites with severe epidemics. Fungicide timing is important for good control, as products available to control sclerotinia stem rot are protectants and have little or no curative activity. The optimum timing for a single spray is, usually, just before mid-flowering on the main raceme and prior to significant petal fall. Treatments provide good control for about three weeks. Two sprays may, therefore, be required to protect crops at high risk sites throughout the flowering period (especially when the flowering period is extended). Fungicides differ in their physiological effects on the crop and also efficacy against other diseases that may require control during flowering (e.g. light leaf spot). Whether additional disease control or growth regulation (e.g. to decrease lodging risk) is required should be considered when selecting products. Strategies are required to minimise the risks of selecting for fungicide resistant strains of sclerotinia and other pathogens. No resistance to fungicides has been reported for sclerotinia and likelihood of it occurring can be decreased by using mixtures, co-formulated products and products with a different mode of action throughout flowering and the whole fungicide programme. Strains with decreased sensitivity to SDHIs and MBCs have been reported in France demonstrating the importance of implementing strategies now. It is important that fungicide resistance management guidelines are followed (e.g. do not rely on a single mode of action for sclerotinia stem rot control).

GLANBIA IRELAND AGRONOMY UPDATE

39


GRAIN MARKETS 2022 – DEALING WITH UNCERTAINTY Written by Donal Moloney

While every harvest year or growing season carries a level of uncertainty, it is probably fair to say that 2022 looks like overshadowing most, if not all years in recent memory, in regard to the unpredictability that lies ahead, particularly with regard to grain price. At this stage, all growers will be well aware of the surge in input prices over recent months, in particular fertiliser and fuel prices. Input price increases and possible product availability issues look set to remain with us in the short to medium term at least. Thus far, grain price has also maintained a strong upward trajectory, boosted in recent weeks by the Russian invasion of Ukraine. In theory, strong output prices could outweigh high input prices; however, this equation is fraught with risk in that growers will incur the bulk of their input costs in spring while it will be several months later before crops are harvested and the value of output can be counted. While it is easy to view grain markets as only “going one way”, history has taught us that markets never remain one-directional indefinitely. Much of the current focus is on the likely reduction in Ukrainian grain production, specifically maize in 2022, as well as the curtailment of exports from that region. While Ukraine is one of the world’s major grain-producing regions, it is obviously not the only one. It is worth noting that Brazil is currently on track to increase its maize production by as much as 30m tonnes compared to 2021; Brazil’s main maize crop was decimated by drought last year but this year’s crop has been sown on time in excellent conditions and has received favourable weather to date.

Figure 1 is an extract from the 2022 Crop Costs & Returns booklet published by Teagasc and updated to take account of recent movements in both input and grain prices. The extract shows gross margins for the main cereal crops at different yield levels. Even with the huge increase in input prices in 2022, growers achieving average yields will attain reasonable margins while those hitting high (target) yields could be well on the way to having quite a profitable year. The graph in Figure 2 supports this argument showing that current prices available for green grain compare favourably with the corresponding cost of production when set against previous years. The main conundrum of course is that the grain prices shown in Figures 1 and 2 may not be available at harvest; they may well of course be higher but is that a risk worth taking? Forward selling a proportion of their crop allows a grower to take advantage of high prices well in advance of harvest and in so doing, lock in a margin on that quantity of grain. The most prudent approach to forward selling is “little and often” – nobody can know when the market has peaked until well after the event. For any grain grower, it is the average selling price achieved across a season that is most relevant, not the highest or lowest prices. Many growers will comment that forward selling is a “gamble”; however the real gamble for 2022 is waiting until harvest to see how price develops as the investment in inputs has never been higher.

Figure 1 – 2022 Cereal Crop Gross Margins based on Input Costs & Forward Grain Prices (March 2022) FEED WHEAT TOTAL VARIABLE COSTS (€/HA)

FEED BARLEY

Winter

Spring

Winter

Spring

2106

1758

1874

1557

MALTING BARLEY

1534

FEED OATS

Winter

Spring

1552

1513

BREAK-EVEN YIELD (T/HA)

7.9

6.6

7.6

6.4

5.6

6.6

6.4

COST PER TONNE @ TARGET YIELDS* (€)

191

195

187

195

205

172

202

NET PRICE (€/TONNE)

265

265

245

245

275

235

235

STRAW (€/HA)

250

250

300

250

250

250

250

-134

214

19

286

503

225

265

7.5

131

479

264

531

778

460

500

8

264

612

386

653

916

578

617

9

529

877

632

898

1191

813

852

10

794

1142

876

1143

1466

1048

11

1059

1121

12

1324

1366

GROSS MARGINS - INCL. STRAW (€/HA) YIELD - TONNES/HECTARE 6.5

*Crop margins are underlined for the various crop target yields. Fertiliser requirements are based on target yields.

Figure 2: Green Grain Production Cost vs. March Grain Price (2014 – 2022)

WHEAT COST

40

BARLEY COST

MARCH WHEAT

GLANBIA IRELAND AGRONOMY UPDATE

MARCH BARLEY

Source: Teagasc, 2022



NOTES

42

GLANBIA IRELAND AGRONOMY UPDATE


YOUR LOCAL GLANBIA IRELAND AGRONOMY TEAM

Head of Grains & JVs

Grain Manager

John Kealy

Donal Moloney – 087 2530566

South Kildare

North Wexford/Wicklow

Sean Boland – 087 2273885

Carlow

Barry Purcell – 087 6668879

North East

Jayne Smyth – 087 9487460

Tom Hession – 086 0285412

North Kildare

Peter O’Grady – 087 2527045

Tipperary/Cork

David Quinlan – 086 0213200

Agronomy Manager

David Cooney – 086 0404638

Kilkenny

James Hickey – 087 7525138

South Wexford

Ed Prendergast – 087 2568967

Laois/Offaly

Tim Scott – 087 7553410

GLANBIA IRELAND AGRONOMY UPDATE

43


Glanbia Ireland Purcellsinch Industrial Estate, Kilkenny, R95 E70V, Ireland. LoCall 0818 321 321 Email agricsc@glanbia.ie

www.glanbiaconnect.com The information contained in this document is provided by Glanbia for your information only and has not been independently verified. While Glanbia endeavours to ensure that all information contained in this document is correct, no warranty is given that the information is accurate. Glanbia disclaims any and all liability to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from the use of the information contained in this document.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.