ECLIPSE E2
Wood - Max 40 kg per panel
ECLIPSE SYSTEMS System for folding doors and windows
ECLIPSE
The window as a new piece of furniture: no longer only a tool of protection and closing environments, but a new way of conceiving space.
With ECLIPSE the window changes shape, change its appearance, it changes lives.
ECLIPSE allows to create folding door and window in wood, clad (wood-aluminum) or wood-bronze and aluminum, making it an added value for each house.
The window can be flat, rounded or angular; in the latter case without need for a column in the middle.
Versatile, easy to install and assemble, the ECLIPSE window gives the house an higher gear.
ECLIPSE becomes the new philosophy of life: the various types satisfy all requirements.
The six lines of the ECLIPSE system allow to realize windows of high value for every situation, both internal and external, alwasy following the same philosophy:
the view becomes panoramic.
ECLIPSE SYSTEMS System for folding doors and windows
ECLIPSE allows to create folding doors and windows that can reach 16 meters in width and 3 or 4 meters in height, depending on the type of system selected. ECLIPSE System provides the window opening is to both outward or inward, to resolve all need of space. In wood, wood-aluminum, or wood-bronze. Any combination is possible: ECLIPSE system is the most versatile system.
FEATURES Completeness of the system Provides all the necessary elements for the construction of the window: the upper track, the lower track or the sill, hinges, carrier, dropbolt, seals and lock with cylinder. ECLIPSE, never been easier.
Easy construction of the frame and the panels Panels all the same, smooth, without rebate. Frame and the bottom frame of easy construction. The accessories are all applied in support. The only milled from build on the panels are for the housing upper and lower dropbolts and seals. ECLIPSE, never been easier.
Adjusting to window installed ECLIPSE allows to adjust the window when the window is installed, without remove the panels. The vertical adjustment occurs when the window is mounted, acting on the lower carriers; while the lateral adjustmente occurs on the hinge side of the frame.
Vertical adjustment
Lateral adjustment
ECLIPSE SYSTEMS System for folding doors and windows
LINEAR WINDOWS Can make window wide up to 16 meters, with a 16 total panels, for up to 8 panels for side, opening outward or inward. Any combination is possible, such as: 4 left panels, or 5 right panels, 8 left panels, or 3 left panel + 8 right panels, or 1 left panel + 5 right panels, etc. ECLIPSE, never been easier.
CURVED WINDOWS Can make curved windows,opening outward or inward. The only important element to be considerer is the measurement of the radius, that should not be less than 4 meters. The upper and the lower tracks are curved to measure. Although it is curved, the window does not change: the panels are all square, smooth, withouth rebated, and all the same, just as linear window. ECLIPSE, never been easier.
WINDOWS AT AN ANGLE Can create two windows to close two side of a room, without the need of a column in the corner. The windows are all the same, with the only except that the last leaf of each side will present the rebate to facilitate the closing of the window. ECLIPSE, never been easier.
SHUTTER OR INTERNAL PARTITIONS The ECLIPSE System allows to create even shutters, or internal partitions. These shutters can be installed even in the presence of a window existing sliding doors, thus providing the darkening function. ECLIPSE, never been easier.
ECLIPSE SYSTEMS Features - The lower tracks
All ECLIPSE System are composed of identical elements, which differ only depending on the flow rates of the different systems. At the bottom ECLIPSE Systems can provide for the application of a track as exemplified in the figures below.
Bottom track into the floor The bottom track can be completely embedded in the floor, resulting in a window with a flat base and absolutely not cumbersome. Ideal for close porches, conservatories or other environments that do not require specific performance of resistance to weathering.
Bottom track encased in a wooden bottom frame In case of a window opening to the outside, the bottom track can be encased into a wooden bottom frame, resulting in a window with a bottom internal rebate that allows excellent performance of resistance to agents atmospheric.
Bottom track encased in a wooden bottom frame In case of window opening to the inside, the bottom track can be encased in a woodden bottom frame, resulting in a window with a external bottom rebate that allows excellent performance of resistance to agents atmospheric.
Bottom track encased in a concrete ramp In a particular situation such as a garae, where there is not require performance of resistance to weathering, the bottom track can be encased directly in the floor with a ramp.
ECLIPSE SYSTEMS Features - The sill
All ECLIPSE System are composed of identical elements, which differ only depending on the flow rates of the different systems. At the bottom ECLIPSE Systems can provide for the application of a sill as exemplified in the figures below.
Aluminum sill for outward opening In this case there is a window with outward opening. The sill is applied to a wooden bottom frame with internal rebate. The minimum height recommended for optimal performance of resistance to agents atmospheric is 25 mm.
Aluminum sill for outward opening with small size In case of window opening outward, the sill can be applied in wooden bottom frame, always with a internal rebate. If, howewer, has required a shift in a compact size, the internal bottom rebate may be reduced a minimun height of 15 mm.
Aluminum sill for outward opening - Winter Garden Applications In this case there is a presence of a window with outward opening, which does not require special performance of resistance to weathering. Therefore, it is possible to apply the sill in a wooden bottom frame, withouth rebate.
For the lateral extremities of the sill are set plastic end caps, if you do not provide wooden claps.
ECLIPSE E2 Wood - Max 40 kg for panel
ECLIPSE E2 ECLIPSE E2 is the system designed for window of light weight or only in wood, withouth glass, such as shutters or internal partitions. The maximum weight of each panel should not exceed 40 kg, in the limit of 16 panles, with 8 panels per side. The ECLIPSE E2 system allows to make a window from the total weight of 6,40 tons. With ECLIPSE E2 System the panels can reach the maximum height of 3 meters and the maximum width of 1 meter. The panel thickness can be from 35 to 85 mm. ECLIPSE E2 is to use in the lower part the bottom track or the aluminum sill.
ECLIPSE E2 Wood - Max 40 kg for panel
Whenever we collaborate with architects, designers and engineers, we are surprised at how much entusiasm, satisfaction and creativity radiating with ECLIPSE Systems. Thank to the ECLIPSE Systems you can give free rein to the imagination: the wiew can be panoramic.
ECLIPSE E2 Wood - Max 40 kg for panel
ECLIPSE E2: Technical specifications maximum opening in widht maximum weight for panel maximum width for panel maximum height for panel panel thickness in mm maximum panels number opening
16 mts 40 kg 1 meter 3 meters 35-85 8+8 out/in
RESISTANCE TO ATMOSPHERIC AGENTS Significant results of water resistance is can obtain both the outward and inward opening. Thanks to equal and smooth shape of the panels and to seals that work under pressure, can achieve excellent results of air and wind resistance.
ADJUSTMENT The vertical adjustment occurs when the window is mounted. It acts on the top carriers, as evidenced in the figure below.
PROVEN PERFORMANCE Manufactured in the highest grade of stainless steel, brass, aluminum and plastic elements of high quality, all components of E2 System were subjected to stringet laboratory test, including testing of cyclic operation (achieved 50.000 cycles), corrosion, structural capacity and comprehensive analysis of all elements. This allows to reach unparalleled results for a system with raised to the ceiling. Extremely fluid, silent. silenzioso.
The lateral adjustament occurs acting on the pivot hinge in the frame.
EASY INSTALLATION AND ADJUSTMENT The installation and the assembley could not be more easier: all hardware is applied in support to the window. This innovative hinge system allows so to make panel with the same size, with a flat profile, and without rebate.
ECLIPSE E2 Technical details
To one side is shown the development of a window, for example, with 4 panels all on one side.
Providing all the same panels, the folding window created with ECLIPSE E2 System must be constructed in accordance with the gaps indicated in Figure 1. Among the frame tothe first panel the gap must be 7 mm Among panel to panel the gap must be 4 mm. Fig. 1
In the Figure 2 we can see that, once closed the window, observed gap in the construction of the frame allows the ermetic closing of the panel, thanks to seals that act under pressure. It should be noted that the gap between the leaves is given automatically by hinges, which have a thickness of 4 mm. Fig. 2
ECLIPSE E2 Technical Details
ECLIPSE E2 System: Application with bottom track
ECLIPSE E2 Technical Details
ECLIPSE E2 System: Application with aluminum sill
ECLIPSE E2 Finish Inox - Price List
Code
ECLIPSE E2 -Finish Inox Description TRACKS AND SEALS
14TAM24N 14TAM4N 14TAM6N E22FCR24N E22FCR4N E22FCR6N E22FC24 E22FCP4 E22FCP6 E3CDSM42N E3CDSM57N E3CDSECR E3CDSECL AQ21-W/B AQ63-W/B AQ109-W/B
Top track mm 2500 Top track mm 4000 Top track mm 6000 Bottom track mm 2400 Bottom track mm 4000 Bottom track mm 6000 Poly channel mm 2400 Poly channel mm 4000 Poly channel mm 6000 Bottom sill mm 4200 Bottom sill mm 5700 Closing right cup for sill Closing left cup for sill Seal for frame Seal for panel Seal for closing panel
E2CPSS E22WPSS E2CICSS E2CLCSS E2CRCSS E22HHSS E22HHNHSS E22HSS E22HNHSS E22HHNHS E22HNHS E22EHS
Pivot set Wall pivot set Intermediate carrier set Left hand carrier set Right hand carrier set Half offset hinge set No handle half offset hinge set Hinge set No handle hinge set (3 ps.) Single half offset hinge Single hinge set External handle
Finish All. Nat. All. Nat. All. Nat. All. Nat. All. Nat. All. Nat. Nylon Nylon Nylon All. Nat. All. Nat. All. Nat. All. Nat. Whit/Brow Whit/Brow Whit/Brow
CARRIERS AND HINGES
,
St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel St.Steel
Price
CDS CENTRO DISTRIBUZIONE SICUREZZA SRL 35010 LIMENA (PD) - ITALY - Via Pierobon 129 T. +39 049 8841502 F. +39 049 8846168 www.cdslimena.it - info@cdslimena.it