ECLIPSE E3
Wood - Max 80 kg per panel
ECLIPSE SYSTEMS System for folding doors and windows
ECLIPSE
The window as a new piece of furniture: no longer only a tool of protection and closing environments, but a new way of conceiving space.
With ECLIPSE the window changes shape, change its appearance, it changes lives.
ECLIPSE allows to create folding door and window in wood, clad (wood-aluminum) or wood-bronze and aluminum, making it an added value for each house.
The window can be flat, rounded or angular; in the latter case without need for a column in the middle.
Versatile, easy to install and assemble, the ECLIPSE window gives the house an higher gear.
ECLIPSE becomes the new philosophy of life: the various types satisfy all requirements.
The six lines of the ECLIPSE system allow to realize windows of high value for every situation, both internal and external, alwasy following the same philosophy:
the view becomes panoramic.
ECLIPSE SYSTEMS System for folding doors and windows
ECLIPSE allows to create folding doors and windows that can reach 16 meters in width and 3 or 4 meters in height, depending on the type of system selected. ECLIPSE System provides the window opening is to both outward or inward, to resolve all need of space. In wood, wood-aluminum, or wood-bronze. Any combination is possible: ECLIPSE system is the most versatile system.
FEATURES Completeness of the system Provides all the necessary elements for the construction of the window: the upper track, the lower track or the sill, hinges, carrier, dropbolt, seals and lock with cylinder. ECLIPSE, never been easier.
Easy construction of the frame and the panels Panels all the same, smooth, without rebate. Frame and the bottom frame of easy construction. The accessories are all applied in support. The only milled from build on the panels are for the housing upper and lower dropbolts and seals. ECLIPSE, never been easier.
Adjusting to window installed ECLIPSE allows to adjust the window when the window is installed, without remove the panels. The vertical adjustment occurs when the window is mounted, acting on the lower carriers; while the lateral adjustmente occurs on the hinge side of the frame.
Vertical adjustment
Lateral adjustment
ECLIPSE SYSTEMS System for folding doors and windows
LINEAR WINDOWS Can make window wide up to 16 meters, with a 16 total panels, for up to 8 panels for side, opening outward or inward. Any combination is possible, such as: 4 left panels, or 5 right panels, 8 left panels, or 3 left panel + 8 right panels, or 1 left panel + 5 right panels, etc. ECLIPSE, never been easier.
CURVED WINDOWS Can make curved windows,opening outward or inward. The only important element to be considerer is the measurement of the radius, that should not be less than 4 meters. The upper and the lower tracks are curved to measure. Although it is curved, the window does not change: the panels are all square, smooth, withouth rebated, and all the same, just as linear window. ECLIPSE, never been easier.
WINDOWS AT AN ANGLE Can create two windows to close two side of a room, without the need of a column in the corner. The windows are all the same, with the only except that the last leaf of each side will present the rebate to facilitate the closing of the window. ECLIPSE, never been easier.
SHUTTER OR INTERNAL PARTITIONS The ECLIPSE System allows to create even shutters, or internal partitions. These shutters can be installed even in the presence of a window existing sliding doors, thus providing the darkening function. ECLIPSE, never been easier.
ECLIPSE SYSTEMS Features - The lower tracks
All ECLIPSE System are composed of identical elements, which differ only depending on the flow rates of the different systems. At the bottom ECLIPSE Systems can provide for the application of a track as exemplified in the figures below.
Bottom track into the floor The bottom track can be completely embedded in the floor, resulting in a window with a flat base and absolutely not cumbersome. Ideal for close porches, conservatories or other environments that do not require specific performance of resistance to weathering.
Bottom track encased in a wooden bottom frame In case of a window opening to the outside, the bottom track can be encased into a wooden bottom frame, resulting in a window with a bottom internal rebate that allows excellent performance of resistance to agents atmospheric.
Bottom track encased in a wooden bottom frame In case of window opening to the inside, the bottom track can be encased in a woodden bottom frame, resulting in a window with a external bottom rebate that allows excellent performance of resistance to agents atmospheric.
Bottom track encased in a concrete ramp In a particular situation such as a garae, where there is not require performance of resistance to weathering, the bottom track can be encased directly in the floor with a ramp.
ECLIPSE SYSTEMS Features - The sill
All ECLIPSE System are composed of identical elements, which differ only depending on the flow rates of the different systems. At the bottom ECLIPSE Systems can provide for the application of a sill as exemplified in the figures below.
Aluminum sill for outward opening In this case there is a window with outward opening. The sill is applied to a wooden bottom frame with internal rebate. The minimum height recommended for optimal performance of resistance to agents atmospheric is 25 mm.
Aluminum sill for outward opening with small size In case of window opening outward, the sill can be applied in wooden bottom frame, always with a internal rebate. If, howewer, has required a shift in a compact size, the internal bottom rebate may be reduced a minimun height of 15 mm.
Aluminum sill for outward opening - Winter Garden Applications In this case there is a presence of a window with outward opening, which does not require special performance of resistance to weathering. Therefore, it is possible to apply the sill in a wooden bottom frame, withouth rebate.
For the lateral extremities of the sill are set plastic end caps, if you do not provide wooden claps.
ECLIPSE E3 Wood - Max 100 kg for panel
ECLIPSE E3 ECLIPSE E3 is the bi-folding system for excellence, designed to all types of wooden windows and doors. The maximum weight of each panel should not exceed 100 kg,in extreme case of 16 panels, 8 per side, the ECLIPSE E3 system allows to realize a window from the totale weight of 12,80 tons. With ECLIPSE E3 system the panels can reach a height maximum of 3 meters and a maximum width of 1 meter. The panel thickness can be from 35 to 85 mm. ECLIPSE E3 system is to use at the bottom both the bottom track and the sill, ensuring the optimal solution for every need.
ECLIPSE E3 Wood - Max 100 kg for panel
Whenever we collaborate with architects, designers and engineers, we are surprised at how much entusiasm, satisfaction and creativity radiating with ECLIPSE Systems. Thank to the ECLIPSE Systems you can give free rein to the imagination: the wiew can be panoramic.
ECLIPSE E3 Wood - Max 100 kg per panel
ECLIPSE E3: Specifications maximum opening width maximum panel weight maximum panel width maximum panel height panel thickness maximum panel numbers opening
ANTI-CORROSION TEST 16 mts. 80 kg 1 mt 3 mts. 35-85 8+8 in/out
Stainless steel, anodized aluminum and plastic parts of high quality are used to realize the E3 system. Each material is selected for obtain the best performance.
WEATHER RESISTANCE The Centor hardware has been tested in accordance with Australian Standard law AS2047, which provides minimum level of performance required for resistance to water and wind. In addition, the ECLIPSE E3 and E4 systems were certified in accordance with the provisions of anti-Hurricane provided by Miami-Dade County ADJUSTMENT The adjustment occurs when standards. With the same technology the E3 the window is mounted, acting systemhas reached satisfactory results in on the top carriers for the water and air resistance, both opening vertical adjustment. to the outside and inside.
AIR RESISTANCE The E3 system has achieved excelletn results air resistance, thanks to the ability hermetic seals and hinges, which prevent air infiltration, reaching high levels of performance. The lateral adjustment occurs acting on the pivot hinge set on the frame.
FUNCIONALITY CYCLES The E3 system has been subjected to the test cyclin, reaching 50.000 complete cycles of opening and closing, without having no structural failure. Each component has also been tested for 100.000 cycles.
ECLIPSE E3 Technical details
To one side is shown the development of a window, for example, with 4 panels all on one side.
Providing all the same panels, the folding window created with ECLIPSE E3 System must be constructed in accordance with the gaps indicated in Figure 1. Among the frame tothe first panel the gap must be 7 mm Among panel to panel the gap must be 4 mm.
In the Figure 2 we can see that, once closed the window, observed gap in the construction of the frame allows the ermetic closing of the panel, thanks to seals that act under pressure. It should be noted that the gap between the leaves is given automatically by hinges, which have a thickness of 4 mm. Fig. 2
ECLIPSE E3 Technical details
ECLIPSE E3: Application with bottom track
ECLIPSE E3 Technical details
ECLIPSE E3: Application with bottom sill
ECLIPSE E3 Finish Inox - Price List
Code E3TAM24N E3TAM4N E3TAM6N E22FCR24N E22FCR4N E22FRC6N E22FCP24 E22FCP4 E22FCP6 E3CDSM42N E3CDSM57N E3CDSECR E3CDSECL AQ21-B/W AQ63-B/W AQ109-B/W QEZ345-B/W
Code E3CPSS E3WPSS E3CICSS E3CLCSS E3CRCSS E3HHSS E3HHNHSS E3HSS E3HNHSS E3HHNHS E3HNHS E3EHS DF1IPHS
ECLIPSE E3- Finish Inox TRACKS AND SEALS Description Top track mm 2400 Top track mm 4000 Top track mm 6000 Bottom track mm 2400 Bottom track mm 4000 Bottom track mm 6000 Poly channel mm 2400 Poly channel mm 4000 Poly channel mm 6000 Bottom sill mm 4200 Bottom sill mm 5700 Closing right cup for sill Closing left cup for sill Seal for frame Seal for panel Seal for closing panel Top track seal
CARRIERS AND HINGES Description Pivot hinge set Wall pivot hinge Intermediate carrier set End left carrier set End right carrier set Handle half offset hinge set No handle half offset hinge set Handle hinge set No handle hinge set Single half offset hinge Singe hinge External handle Internal handle
Finish
Price
Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Al.Nat Black Black White/Brown White/Brown White/Brown White/Brown
Finish Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St. Stainl.St.
Price
ECLIPSE E3 Finish Bronze - Price List
Code E3TAM4R E3TAM6R E22FCR4R E22FRC6R E22FCP4 E22FCP6 E3CDSM42R E3CDSM57R E3CDSECR E3CDSECL AQ21-B/W AQ63-B/W AQ109-B/W QEZ345-B/W
Code E3CPSOL E3WPSOL E3CICSOL E3CLCSOL E3CRCSOL E3HHSOL E3HHNHSOL E3HSOL E3HNHSOL E3HHNHOL E3HNHOL E3EHOL DF1IPHOL
ECLIPSE E3 - Finish Bronze TRACK AND SEALS Description Top track mm 4000 Top track mm 6000 Bottom track mm 4000 Bottom track mm 6000 Poly channel mm 4000 Poly channel mm 6000 Bottom sill mm 4200 Bottom sill mm 5700 Closing right cup for sill Closing left cup for sill Seal for frame Seal for panel Seal for closing panel Top track seal
CARRIERS AND HINGES Description Pivot hinge set Wall pivot hinge Intermediate carrier set End left carrier set End right carrier set Handle half offset hinge set No handle half offset hinge set Handle hinge set No handle hinge set Single half offset hinge Singe hinge External handle Internal handle
Finish
Price
Al.Bronze Al.Bronze Al.Bronze Al.Bronze Al.Bronze Al.Bronze Al.Bronze Al.Bronze Black Black White/Brown White/Brown White/Brown White/Brown
Finish St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze St.Bronze
Price
ECLIPSE E3 Finsh Gold - Price List
Code E3TAM24G E3TAM4G E3TAM6G E22FCR24G E22FCR4G E22FRC6G E22FCP24 E22FCP4 E22FCP6 E3CDSM42G E3CDSM57G E3CDSECR E3CDSECL AQ21-B/W AQ63-B/W AQ109-B/W QEZ345-B/W
Code E3CPSTG E3WPSTG E3CICSTG E3CLCSTG E3CRCSTG E3HHSTG E3HHNHSTG E3HSTG E3HNHSTG E3HHNHG E3HNHG E3EHG DF1IPHG
ECLIPSE E3 - Finish Gold TRACKS AND SEALS Description Top track mm 2400 Top track mm 4000 Top track mm 6000 Bottom track mm 2400 Bottom track mm 4000 Bottom track mm 6000 Poly channel mm 2400 Poly channel mm 4000 Poly channel mm 6000 Bottom sill mm 4200 Bottom sill mm 5700 Closing right cup for sill Closing left cup for sill Seal for frame Seal for panel Seal for closing panel Top track seal
CARRIERS AND HINGES Description Pivot hinge set Wall pivot hinge Intermediate carrier set End left carrier set End right carrier set Handle half offset hinge set No handle half offset hinge set Handle hinge set No handle hinge set Single half offset hinge Singe hinge External handle Internal handle
Finish
Price
Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Al.Gold Black Black White/Brown White/Brown White/Brown White/Brown
Finish St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold St.Gold
Price
CDS CENTRO DISTRIBUZIONE SICUREZZA SRL 35010 LIMENA (PD) - ITALY - Via Pierobon 129 T. +39 049 8841502 F. +39 049 8846168 www.cdslimena.it - info@cdslimena.it