SALTWATER

SALTWATER REELS

Saltwater fishing can be extremely severe and saltwater intrusion into the inside of a reel can cause serious performance problems. Therefore it is imperative to enhance water resistance without impairing the properties of spinning reels designed for saltwater fishing. SHIMANO achieves this by using X-Shield for body protection and X-Protect for rotor protection. Also, the pressure put on the gearing during extreme use can create problems with wear and even failure. The use of SHIMANO’s HAGANE gearing ensures that maximum performance is maintained at all times. These technologies can be found on many of SHIMANO’s latest models.

84 SALTWATER REEL TECHNOLOGY 85 STELLA SW 88 TWINPOWER SW 89 SARAGOSA SW 90 SPHEROS SW-A 91 SPHEROS SW SOCORRO SW

NEW

SALTWATER REEL TECHNOLOGY SALTWATER REEL

TECHNOLOGY

INFINITYDRIVE

InfinityDrive has been introduced to complement the existing X-SHIP system to deliver light and powerful winding. In spinning reels this development reduces the friction of spool oscillation with a special design and combination of parts. As a result, handle rotation resistance is reduced considerably, when compared to a conventional system, resulting in easier winding, even under extreme pressure.

BENEFIT

InfinityDrive enables light, but extremely powerful winding, which helps to fight powerful fish in an extreme salt water environment.

SPECIAL SLIDING COAT MAIN SHAFT HIGH SLIDING BUSHING

HEAT SINK DRAG

Heat Sink technology enables dissipation of excessive heat build-up when the spool is rotating quickly and keeps the heat away from the spool surface and drag washer where it can cause a reduction in drag performance.

BENEFIT

When playing fish under extreme pressure, it is quite common for the drag pressure to reduce in resistance as heat builds up in the spool and drag system due to friction. The Heat Sink technology dissipates heat away from important areas and enables maximum drag performance to be maintained for longer. An additional advantage is it also keeps heat away from your line reducing potential damage.

INSULATION SHEET

DRAG SECTION

HEATSINK PANEL

X-SHIELD

By placing sealing gaskets in critical locations throughout the reel body, SHIMANO is able to create a water resistant structure that can hold up against the toughest conditions, giving excellent protection from water and foreign object ingress.

BENEFIT

Because of the X-Shield water resistant sealing, the reel is protected against water, dirt, salt and dust. That’s really important, because water and foreign objects can affect the functioning of the gearing and other mechanical parts of the reel. X-Shield also increases the life-time and durability of the reel and ensures excellent longevity of performance.

X-PROTECT

X-Protect is a water-resistant technology that comes in several forms and is dependent on the reel category and intended usage of each reel. The roller clutch (body area) in large spinning reels works with a “contact style” water resistance. Contact style makes use of a combination of labyrinth construction, rubber gaskets and grease to strongly prevent water from coming into a certain area of the reel. This design makes it possible to achieve up to IPX8 level water resistance for the roller clutch of some larger spinning reels. The roller clutch in smaller reels works with a “noncontact style” water resistance. Non-contact style makes use of a labyrinth structure along with a water repellent material that ensures both light rotation and water resistance performance. Compared to larger reels, smaller reels require sensitivity and a sufficient level of water resistance. The non-contact style protects the reel but does not sacrifice rotation lightness.

BENEFIT

X-Protect seals the roller clutch, line roller and drag area, to prevent water intrusion. This advanced protection technology increases the durability of the reel and gives a high level protection in even the toughest conditions. This ensures good performance for a long time, without affecting the smoothness of the reel when rotating.

Waterproof coating

With applied water pressure, water can not reach the inner part

X-TOUGH DRAG

X-Tough Drag is SHIMANO’s toughest drag configuration and incorporates large diameter drag washers at the base of the spool, which provide greater drag stability. The result is smooth and consistent drag performance throughout the fight.

BENEFIT

X-Tough Drag creates a more durable, smoother drag with increased stability. This results in more assured fishplaying, even in the most extreme circumstances.

RIGID SUPPORT DRAG

Supporting the spool with the main shaft and two bearing links in the spool reduces spool flutter to provide stable and smooth drag performance, especially in the initial stage of the fight.

BENEFIT

Rigid Support Drag eliminates spool movement and wobble, even at light drag settings. The result is an incredibly smooth drag even at extremely light settings.

MAXIMUM DRAG FORCE (KG)

25

8000HG  8000PG 10000PG 14000XG 18000HGC 20000PGC 30000C

24

23

8000PG  8000HG 10000PG  10000HG 14000XG

SW-A 18000  20000

22

21

SW-A 25000

20

19

10000  14000 18

15

SW-A 18000  20000

5000HG  5000XG 6000PG  6000HG 6000XG

14

13

5000HG  5000XG 6000HG  6000XG

SW-A 8000

8000

10000  14000

SW-A 12

11

4000HG  4000X

5000  6000

5000  6000

10

SW-A

9

8000  10000

4000

4000XG

5000  6000

3000HG  3000XG

8

SALTWATER REELS INFINITE POWER

• The ultimate saltwater spinning reel with a worldwide reputation for excellence beyond comparison • HAGANE Gear and Body for maximum strength and durability • InfinityDrive increases winding torque by up to 26% providing increased smoothness and light rotation whilst also increasing power • Improved X-Protect and X-Shield for ultimate saltwater protection • SilentDrive, re-engineered components reduce microscopic movement in the handle resulting in quieter operation • X-Tough Drag is an upgraded drag providing more power and adjustment control • Heat Sink spool technology (10000 + models only) controls heat created by the drag under extreme speed to help maintain original drag setting and also reduces line damage due to excessive heat • 8000 size has new offset handle for more power and narrow rotor for 23% reduction in rotational inertia • Aero Wrap and AR-C spool for maximum casting performance

SIZES: 4000, 5000, 6000, 8000, 10000, 14000, 18000, 20000, 30000 BEARINGS: 13 + 1 HANDLE: Screw in Aluminium with Ci4+ Round Knob (10000, 14000 with Oval-Round Knob) WATER RESISTANT DRAG: Yes

STLSW4000HGC 355 5.7:1 0.30mm-180m 93 11 RD20782 STLSW4000XGC 355 6.2:1 0.30mm-180m 101 11 RD20747 STLSW5000HGC 420 5.7:1 0.33mm-200m 97 13 RD20472 STLSW5000XGC 420 6.2:1 0.33mm-200m 105 13 RD20530 STLSW6000PGC 425 4.7:1 0.33mm-240m 83 13 RD20540 STLSW6000HGC 425 5.7:1 0.33mm-240m 103 13 RD20550 STLSW6000XGC 425 6.2:1 0.33mm-240m 112 13 RD20553 STLSW8000HGC 625 5.6:1 0.37mm-275m 107 25 RD19523 STLSW8000PGC 625 4.9:1 0.37mm-275m 94 25 RD19617 STLSW10000PGC 670 4.9:1 0.40mm-300m 102 25 RD19633 STLSW14000XGC 675 6.2:1 0.40mm-330m 134 25 RD19668 STLSW18000HGC 875 5.7:1 0.52mm-310m 129 25 RD20787 STLSW20000PGC 885 4.4:1 0.52mm-350m 104 25 RD20803 STLSW30000C 975 4.4:1 0.62mm-400m 131 25 RD20977

SALTWATER REELS CHALLENGE THE

IMPOSSIBLE

• The new TWINPOWER SW takes 30 years of SHIMANO Big

Game knowledge and experience, combines it with unrivalled engineering and delivers it in one amazing reel • HAGANE Body, HAGANE Gear, X-SHIP and SilentDrive refinement for faultless performance in extreme situations • InfinityDrive increases smoothness and light rotation whilst also increasing winding power • X-Shield and X-Protect technology to prevent water intrusion into the body and moving parts • Heat Sink Drag (10,000 & 14,000) controls heat created by the drag under extreme speed to help maintain original drag setting and also reduces line damage due to excessive heat

SIZES: 4000, 5000, 6000, 8000, 10000, 14000 BEARINGS: 9 + 1 (4000 model) 10 + 1 HANDLE: Screw in Single Aluminium Round Knob (10000, 14000 with Oval-Round Knob) WATER RESISTANT DRAG: Yes

TPSW4000XGC 350 6.2:1 0.30mm-180m 101 11 RD21590 TPSW5000HGC 415 5.7:1 0.33mm-200m 97 13 RD21591 TPSW5000XGC 415 6.2:1 0.33mm-200m 105 13 RD21592 5SF41M061 (6000PG) 420 4.6:1 0.33mm-240m 83 13 TPSW6000HGC 420 5.7:1 0.33mm-240m 103 13 RD21594 TPSW6000XGC 420 6.2:1 0.33mm-240m 112 13 RD21595 TPSW8000PGC 615 4.9:1 0.37mm-275m 94 25 RD21511 TPSW8000HGC 615 5.6:1 0.37mm-275m 107 25 RD21478 TPSW10000PGC 655 4.9:1 0.40mm-300m 102 25 RD21518 TPSW10000HGC 655 5.6:1 0.40mm-300m 116 25 RD21529 TPSW14000XGC 660 6.2:1 0.40mm-330m 134 25 RD21532

4000XGC

TAKES SOME BEATING

• Mid priced high performance saltwater spinning and jigging reel • HAGANE Body, HAGANE Gear and X-SHIP, combined with InfinityDrive for extreme cranking performance • X-Protect (IPX-8 rating) for water protection and long-life durability • Heavy duty cold forged spool with AR-C technology • Compact models (5000 - 6000) for shore and lighter boat casting and jigging • Mid-sized models (8000 - 14000) for shore and medium/heavy boat casting and jigging

SIZES: 5000, 6000, 8000, 10000, 14000, 18000, 20000, 25000 BEARINGS: 5 + 1 HANDLE: Screw in Single Aluminium WATER RESISTANT DRAG: Yes (X-Shield)

SRG5000SWAXG 450 6.2:1 0.33mm-200m 105 10 RD21046 SRG6000SWAHG 455 5.7:1 0.33mm-240m 103 10 RD21091 SRG8000SWAHG 675 5.6:1 0.37mm-275m 107 12 RD21287 SRG10000SWAPG 685 4.9:1 0.40mm-300m 94 15 RD21320 SRG14000SWAXG 710 6.2:1 0.40mm-330m 135 15 RD21325 SRG18000SWAHG 915 5.7:1 0.52mm-310m 129 22 RD21389 SRG20000SWAPG 945 4.4:1 0.62mm-240m 104 20 RD21330 SRG25000SWA 970 4.4:1 0.52mm-400m 103 20 RD21387

6000HG

SALTWATER REELS ALWAYS SPINNING

NEW

• Fantastic value, full specification saltwater spinning reel • HAGANE Body, HAGANE Gear and X-SHIP for maximum power and strength • Hi-speed retrieve in smaller sizes for efficient fishing of spinning techniques • Hi-power retrieve in larger sizes for playing big game species • X Protect water resistance for protection and light rotation feel • InfinityDrive increases smoothness and light rotation whilst also increasing winding power • Aero Wrap line lay and AR-C spool for improved casting

SIZES: 5000, 6000, 8000,10000, 14000, 18000, 20000 BEARINGS: 4 + 1 HANDLE: Screw in Single Aluminium WATER RESISTANT DRAG: Yes

SPSW5000XGA 445 6.2:1 0.33mm-200m 105 10 RD21717 SPSW6000HGA 450 5.7:1 0.33mm-240m 103 10 RD21720 51SF53M061A (6000PG) 450 4.6:1 0.33mm-240m 83 10 - SPSW8000HGA 665 5.6:1 0.37mm-275m 107 13 RD21723 SPSW10000PGA 675 4.9:1 0.40mm-300m 102 12 RD21737 SPSW14000XGA 680 6.2:1 0.40mm-300m 134 12 RD21739 SPSW18000HGA 920 5.7:1 0.52mm-310m 129 18 RD21744 SPSW20000PGA 930 4.4:1 0.52mm-310m 104 18 RD21760

10000PG

4000XG

• HAGANE Body, HAGANE Gear and X-SHIP for maximum power and strength • Small compact size for lighter weight rod and reel set-ups whilst retaining immense power • Hi-speed retrieve for efficient fishing of spinning techniques • Coreprotect water resistance for protection and light rotation feel • Aero Wrap line lay and AR-C spool for improved casting • Mid-sized saltwater reel offering great value for money • HAGANE Gear and X-SHIP for maximum winding power and efficiency • Water resistant Cross Carbon Drag for assured performance • Cold forged AR-C spool for long range accurate casting

SIZES: 3000, 4000 BEARINGS: 3 + 1 HANDLE: Screw in Aluminium WATERPROOF DRAG: Yes SIZES: 5000, 6000, 8000, 10000 BEARINGS: 4 + 1 HANDLE: Zinc Diecast WATERPROOF DRAG: Yes

SPC3000HGSW 245 6.0:1 0.25mm-210m 88 9 RD20362 SP3000XGSW 255 6.2:1 0.25mm-210m 91 9 RD20380 SP4000XGSW 280 6.2:1 0.30mm-180m 99 11 RD20389 SOC5000SW 440 4.6:1 0.37mm/150m 78 10 RD17411 SOC6000SW 445 4.6:1 0.37mm/190m 83 10 RD17430 SOC8000SW 640 4.9:1 0.40mm/230m 94 12 RD17433 SOC10000SW 665 4.9:1 0.40mm/300m 102 12 RD17454