Acoustical Solutions Center
www.grabberman.com
A 100% Employee Owned Company “The Professional’s Choice”TM
Index Acoustical Eye-Lag Screws
3
Acoustical Lag Drivers
4
Self tapping eye-lags for attaching to wood Self piercing steel deck eye-lags Self drilling steel deck eye-lags Scorpion brand lag driver Lag driver Lag pole J-master installation tool Two hole angle bracket Angle clip & pin assembly
Acoustical Hangers
Pre-tied angle clip & pin assembly Pre-tied wire and clips NITROSET fasteners NITROSET clip & pin assemblies NITROSET pre-tied wire and clips Straight cut wire Ladd joist hanger Z-purlin hanger Vertical flange hanger Angle flange hanger
3 3 3 4 4 4 4 4 4
5
5 5 6 6 6 6 7 7 7 7
Spring Steel Hangers
7
Self-Seating Acoustical Toggle
9
Beam clip hangers Rod to beam clip assembly Offset bracket fastener Angle bracket fastener Sign hangers Rod hangers
SpringShotTM acoustical toggle bolt
Acoustical Tools and Products
11
Wire Attachment Tools
12
Caulks and Sealants
14
Specifications and Data
15
Ramset Viper NitroSet
Drywall adhesive Sub-floor adhesive Acoustical sealant Endothermic fire caulk Intumescent fire caulk Endothermic fire spray Coatings and finishes Specifications
GRABBER Construction Products
Grabber is an international distributor of premium fasteners and fastening systems for wood, metal, and drywall applications in the commercial and residential construction markets. Grabber is home to the Deckmaster® Hidden Fastening System, the patented LOX® Drive System, and the SuperDrive® Auto-Feed Fastening System. Grabber also distributes a wide range of proprietary tools and accessories, various equipment, and building materials to the construction industry. Grabber is well established in the walls and ceilings industry with more than 25 year partnership with the Association of the Wall and Ceiling Industry (AWCI) organization. This relationship has helped establish a strong base, which has fostered phenomenal growth and success in the construction products industry. In 2009 Grabber became an employee owned company and is dedicated, as it has always been, to providing the best, most technologically advanced construction products available on the market today.
9
10
Bright tension pins Fence staples Grid MatchTM rivets Rivet drill bit Klick-Fast riveter Sure-Punch® 45° grid punch pliers 1/8” grid punch pliers Ceiling grid alignment line (jet line) Leaver action ceiling clamps Heavy duty spring clamps
Grabber Construction Products began in 1967 when John “Brad” Wagner was working as a sales representative for a major construction products company and decided that he could build a better screw than what was currently available. Armed with an engineering degree from Rensselaer Polytechnic Institute, Brad set out to create what is now known as the Grabber screw. One innovative product at a time, Brad grew the modern day Grabber Construction Products company.
7 8 8 8 8 8
Wedge Anchors
Tie wire wedge anchor Tie wire spike
2
About Grabber
10 10 11 11 11 11 11 11 11 11 11 11 12 13 14 14 14 14 14 14 15 15
Brad Wagner entrepreneur - visionary - innovator - engineer . . .and the original Grabberman.
A 100% Employee Owned Company “The Professional’s Choice”TM
Acoustical Eye-Lag Screws Self Tapping Eye-Lags
WOOD CONNECTION Secure fastening into wood for hanger wire attachment. Type 17 self drilling point. Coating: Yellow Zinc
Steel Deck Eye-Lags
SIZE
PART NO.
PKG QTY
DESCRIPTION
1/4 X 3 1/4 X 4 1/4 X 5 1/4 X 6 5/16 X 3 1/2
AL300 AL400 AL500 AL600 AL312
1m 1m 1m .5m 1m
ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17 POINT (Accepts 1/4” pencil rod)
1/4 X 3 1/4 X 4 1/4 X 5 5/16 X 3 1/2
AL300CP AL400CP AL500CP AL312CP
100/BX 100/BX 100/BX 100/BX
ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, YELLOW ZINC, TYPE 17, 10 PACKS EACH CASE (Accepts 1/4” pencil rod)
WOOD CONNECTION
SIZE
Secure fastening into wood for hanger wire attachment. Type 17 self drilling point.
1/4 X 3 1/4 X 4 1/4 X 5
3EL 4EL 5EL
1m 1m 1m
ACOUSTICAL EYE LAG, BLACK PHOSPHATE ACOUSTICAL EYE LAG, BLACK PHOSPHATE ACOUSTICAL EYE LAG, BLACK PHOSPHATE
Coating: Phosphate or Yellow Zinc
1/4 X 3 1/4 X 4 1/4 X 5 1/4 X 3 1/4 X 4 1/4 X 5 1/4 X 3 1/4 X 4 1/4 X 5
3ELC 4ELC 5ELC 3ELYZ 4ELYZ 5ELYZ 3ELCYZ 4ELCYZ 5ELCYZ
100/BX 100/BX 100/BX 1m 1m 1m 100/BX 100/BX 100/BX
ACOUSTICAL EYE LAG, BLACK PHOSPHATE, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, BLACK PHOSPHATE, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, BLACK PHOSPHATE, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, YELLOW ZINC ACOUSTICAL EYE LAG, YELLOW ZINC ACOUSTICAL EYE LAG, YELLOW ZINC ACOUSTICAL EYE LAG, YELLOW ZINC, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, YELLOW ZINC, 10 PACKS EACH CASE ACOUSTICAL EYE LAG, YELLOW ZINC, 10 PACKS EACH CASE
LIGHT GAUGE METAL CONNECTION Secure fastening into light gauge steel for hanger wire attachment. Self piercing sharp point. Installed with 1/4” Scorpion lag driver or pole tool.
SIZE 1/4 X 2-3/4 1/4 X 2-3/4
PART NO.
PART NO. ALSP234 ALSP234CP
PKG QTY
PKG QTY 1m 100/BX
DESCRIPTION
DESCRIPTION ACOUSTICAL EYE LAG, YELLOW ZINC, SELF PIERCING ACOUSTICAL EYE LAG, YELLOW ZINC, SELF PIERCING, 10 PACKS EACH CASE
Coating: Yellow Zinc
LIGHT GAUGE METAL CONNECTION Secure fastening into light gauge steel for hanger wire attachment. Self piercing sharp point. Installed with driver or pole tool.
SIZE 1/4 X 2-3/4 1/4 X 2-3/4 1/4 X 3-1/4 1/4 X 3-1/4
PART NO. H-3 VH-3 H-1 VH-1
PKG QTY 1m 5lb 1m 5lb
DESCRIPTION 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF PIERCING 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF PIERCING 2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF PIERCING 2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF PIERCING
Coating: Yellow Zinc
LIGHT GAUGE METAL CONNECTION Secure fastening into light gauge steel for hanger wire attachment. Self drilling sharp point. Installed with driver or pole tool.
SIZE 1/4 X 2-3/4 1/4 X 2-3/4
PART NO. H-4 VH-4
PKG QTY 1m 5lb
DESCRIPTION 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING 1-1/2” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING
Coating: Yellow Zinc
Steel Deck Eye-Lags
HEAVY GAUGE METAL CONNECTION Secure fastening into heavy gauge steel for hanger wire attachment. Self drilling point. Installed with 1/4” lag driver or pole tool.
SIZE
PART NO.
PKG QTY
DESCRIPTION
1/4 X 2 1/4 X 3-1/4
ALDP200 (JS1) ALDP314
1m 1m
7/8” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING 1-7/8” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING
1/4 X 2 1/4 X 3-1/4
ALDP200CP ALDP314CP
100/BX 100/BX
7/8” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING 1-7/8” EFF, ACOUSTICAL EYE LAG, YELLOW ZINC, SELF DRILLING
Coating: Yellow Zinc
HEAVY GAUGE METAL CONNECTION Secure fastening into heavy gauge steel for hanger wire attachment. Self drilling point. Installed with 1/4” lag driver or pole tool.
SIZE 1/4 X 2-1/8 1/4 X 2-1/8
PART NO. H-2 VH-2
PKG QTY 1m 5lb
DESCRIPTION 7/8” EFF, ACOUSTICAL EYE LAG, CLEAR ZINC, SELF DRILLING 7/8” EFF, ACOUSTICAL EYE LAG, CLEAR ZINC, SELF DRILLING
Coating: Clear Zinc
www.grabberman.com
3
A 100% Employee Owned Company “The Professional’s Choice”TM
Acoustical Lag Drivers Scorpion Brand Lag Driver Professional quality hex shanked lag driver for positive chucking. Collared and chamfered for precise lag alignment.
PART NO.
DESCRIPTION
ALD14 ALD516
1/4” SCORPION HEX SHANK EYE LAG DRIVER 5/16” SCORPION HEX SHANK EYE LAG DRIVER
U.S. Patent # 4,724,731
Lag Driver Professional quality hex shanked lag driver for positive chucking.
Lag Pole Installs I-Lag screws from ground level without the need for ladders, scaffolding, or scissor lifts. Black anodized aircraft quality aluminum. Designed for standard 12 gauge wire, but will work with up to 8 gauge. Telescoping extension allows for fast, easy installation from floor.
J-Master Installation Tool Fast, easy installation from floor level, no ladders or scaffolding necessary. Works with L1701 and L1801. Ideal for strong, reliable attachment of hanger wire from open web bar joists or purlins.
PART NO.
DESCRIPTION
ELAT
EYE-LAG DRIVER
PART NO.
DESCRIPTION
LM12 LM 18 LM24
EYE LAG POLE, 4’ - 12’ EYE LAG POLE, 6’ - 18’ EYE LAG POLE, 12’ - 24’
PART NO.
DESCRIPTION
L-1700
L1700 LADD J-MASTER INSTALLATION TOOL
Threads easily into any 1/2” threaded pipe— no hammering, punching holes or wrapping wire.
Acoustical Hangers Two Hole Angle Bracket
PART NO.
Zinc plated steel.
5/16” 3/16”
1000pcs 100pcs
DESCRIPTION 2 HOLE ANGLE CLIPS - 3/16” X 5/16” HOLE SIZES 2 HOLE ANGLE CLIPS - 3/16” X 5/16” HOLE SIZES
Ten - 100 count boxes per master carton.
Angle Clip & Pin Assbembly
PART NO.
Angle clip & pin assembly for use with powder actuated tools. Available in bulk or count packs.
4
A2H A2HCP (count pack)
PKG QTY
GRABBER Construction Products
SPC78 SPC114
PKG QTY 100 100
DESCRIPTION 7/8” POWER POINT CLIP & PIN ASSEMBLY 1-1/4” POWER POINT CLIP & PIN ASSEMBLY
A 100% Employee Owned Company “The Professional’s Choice”TM
Acoustical Hangers Angle Clip & Pin Assbembly
PART NO.
Angle clip & pin assembly for use with powder actuated tools. Available in bulk or count packs.
Pre-Tied Angle Clip & Pin Assembly Pre-tied 12ga. soft galvanized wire with 1” clip and pin assembly. 100 per bundle. Available in 4’, 6’ 8’ and 12’ lengths. Special ties and longer lengths available. Check with your Grabber location to confirm size availability.
Pre-Tied Wire to Clips Choose from our selection of stocked fasteners or ask us about custom made to meet any application. Special ties and longer lengths available. Check with your Grabber location to confirm size availability.
HOSPCLP2
HOSPCLP
PKG QTY
DESCRIPTION
100 100
1” PREASSEMBLED 14 GAUGE ANGLE CLIP & PIN 1-1/4” PREASSEMBLED 14 GAUGE ANGLE CLIP & PIN
PART NO.
PKG QTY
DHW1204P100 DHW1206P100 DHW1208P100 DHW1212P100 DHW1204P78 DHW1206P78 DHW1208P78 DHW1212P78 DHW1206P114 DHW1204P DHW1206P DHW1208P DHW1212P
100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle)
PART NO.
PKG QTY
HOSPCLP HOSPCLP2 1202CF L652 SDC125 NO ITEM NUMBER SPC114 3EL H-3 H-4 JS1 RBAR
DESCRIPTION
H-3
1” PIN & CLIP ASSEMBLY WITH 4’ GALVANIZED WIRE 1” PIN & CLIP ASSEMBLY WITH 6’ GALVANIZED WIRE 1” PIN & CLIP ASSEMBLY WITH 8’ GALVANIZED WIRE 1” PIN & CLIP ASSEMBLY WITH 12’ GALVANIZED WIRE 7/8” PIN & CLIP ASSEMBLY WITH 4’ GAL WIRE POWER POINT PIN & CLIP 7/8” PIN & CLIP ASSEMBLY WITH 6’ GAL WIRE POWER POINT PIN & CLIP 7/8” PIN & CLIP ASSEMBLY WITH 8’ GAL WIRE POWER POINT PIN & CLIP 7/8” PIN & CLIP ASSEMBLY WITH 12’ GAL WIRE POWER POINT PIN & CLIP 6’ X 12GA WIRE WITH SPC114 POWER POINT PIN & CLIP 1-1/4” PIN & CLIP ASSEMBLY WITH 4’ GALVANIZED WIRE 1-1/4” PIN & CLIP ASSEMBLY WITH 6’ GALVANIZED WIRE 1-1/4” PIN & CLIP ASSEMBLY WITH 8’ GALVANIZED WIRE 1-1/4” PIN & CLIP ASSEMBLY WITH 12’ GALVANIZED WIRE DESCRIPTION
100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle)
HOSPITAL TIE TO 1” X 2” HOSPITAL TIE TO 12 GAUGE CLIP HOSPITAL TIE TO 3” X 4” HOSPITAL TIE TO 12 GAUGE CLIP HOSPITAL TIE TO 1202CF 90° HOSPITAL TIE TO 14 GAUGE CLIP MACHINE TIE TO 13 GAUGE LADD PIN AND CLIP
100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle)
MACHINE TIE TO 14 GAUGE SDC125 CLIP PIGTAIL TIE, 2” LOOP WITH 4” TAIL MACHINE OR HOSPITAL TIE TO 14 GAUGE SPC114 CLIP SPECIAL TIE TO 1/4” X 3” EYE LAG FOR WOOD SPECIAL TIE TO POINTER 1/4” X 1-1/2” EYE LAG FOR WOOD/LT GA STEEL SPECIAL TIE TO 1/4” X 1-3/4”CHISEL POINT EYE LAG SPECIAL TIE TO 1/4” X 7/8” SELF DRILL EYE LAG REBAR TIE, #3 X 12” REBAR TYPICAL
L652
1202CF
3EL PIGTAIL TIE (no item number)
SDC100C SDC125C
H-4
SDC125
JJS1 S1
RBAR
SPC114
www.grabberman.com
5
A 100% Employee Owned Company “The Professional’s Choice”TM
Acoustical Hangers NITROSET Fasteners
PART NO.
Short hardened steel fastener for attaching metal track to concrete.
PIN222W PIN219Y
Not regulated as a class1explosive.
PIN222W PIN219Y PIN319M
PKG QTY 500 1m 500
DESCRIPTION 7/8” X .125 PIN W/ SOLID PROPELLANT NC PILL (Yellow) & WASHER 3/4” X .125 TRACK PIN 3/4” X .145 THICK SHANK TRACK PIN
PIN319M Nitroset pins use a Solid Propellant Fastening System rather than traditional primer or gunpowder, allowing pins to cleanly drive into hard aggregate concrete surfaces with very little noise. Plus, Nitroset is 100% lead free, and complies with OSHA no-lead worksite requirements!
NITROSET Pin & Clip Assembly
PART NO.
PKG QTY
DESCRIPTION
4000psi
For wire suspension hanging acoustical ceiling systems or other overhead fixtures and applications such as hanging lights.
CLAS322L CLAS325L
100 100
7/8” X .145 STRAIGHT SHANK PIN & CLIP WITHOUT SILENCER 1” X .145 STRAIGHT SHANK PIN & CLIP WITHOUT SILENCER
CLAS332L
100
1-1/4” X .145 STRAIGHT SHANK PIN & CLIP WITHOUT SILENCER
Not regulated as a class1explosive.
6000psi 100 100
1” X .152 - .130 STEP SHANK PIN & CLIP WITH SILENCER 1-1/4” X .152 - .130 STEP SHANK PIN & CLIP WITH SILENCER
CLAS525LS CLAS532LS PART NO.
For wire suspension hanging acoustical ceiling systems or other overhead fixtures and applications such as hanging lights.
CLU222
PKG QTY 100
DESCRIPTION 7/8” X .145 ANGLE PIN & CLIP ASSEMBLY
Not regulated as a class1explosive.
NITROSET Pre-Tied Wire to Clips
PART NO.
Pre-tied Nitroset pins and clips. Special ties and longer lengths available. Not regulated as a class1explosive. Custom pins and clip combinations are avilable upon request. Check with your Grabber location to confirm size availability.
4000PSI
DESCRIPTION
4000psi WIL12-4-332 WIL12-6-332 WIL12-8-332 WIL12-10-332 WIL12-12-332 WIL12-14-332 WIL12-16-332 WIL12-18-332 WIL12-20-332
100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle)
4’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 6’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 8’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 10’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 12’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 14’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 16’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 18’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER 20’ PRE-TIED WITH 1-1/4” x 0.145 NITRO FASTENER WITHOUT SILENCER
100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle)
4’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 6’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 8’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 10’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 12’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 14’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 16’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 18’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER 20’ PRE-TIED WITH 1-1/4” x 0.152 NITRO FASTENER WITH SILENCER
6000psi
6000PSI
WIL12-4-532LS WIL12-6-532LS WIL12-8-532LS WIL12-10-532LS WIL12-12-532LS WIL12-14-532LS WIL12-16-532LS WIL12-18-532LS WIL12-20-532LS
Straight Cut Wire
PART NO.
Straight cut 12ga. soft galvanized wire. Check with your Grabber location to confirm length availability.
6
PKG QTY
GRABBER Construction Products
DHW1204 DHW1205 DHW1206 DHW1207 DHW1208 DHW1210 DHW1212 DHW1214 DHW1216 DHW1218 DHW1220 HW1222 HW1224 HW1226 HW1228 HW1230
PKG QTY 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle) 100 (per bundle)
DESCRIPTION 4’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 5’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 6’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 7’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 8’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 10’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 12’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 14’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 16’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 18 X 12 GAUGE HANGER WIRE STRAIGHT END CUT 20’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 22’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 24’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 26’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 28’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT 30’ X 12 GAUGE HANGER WIRE STRAIGHT END CUT
A 100% Employee Owned Company “The Professional’s Choice”TM
Acoustical Hangers Ladd Joist Hanger
PART NO.
Fits 1/16” to 1/4” vertical flanges.
PKG QTY
DESCRIPTION
L1701 (J-Clip)
100
1/16” TO 1/4” FOR VERTICAL FLANGE
PART NO.
WEIGHT
PKG QTY
L1801 (Clip-Pur)
7lbs
300
Accommodates tooling for floor installations.
Z-Purlin Hanger Fits 1/16” to 1/4” thick Z-Purlin.
DESCRIPTION 1/16” TO 1/4” ANGLED Z-PURLIN
217lbs allowable working load. Fast easy attachment of pre-tied hanger wire from Z-Purlins.
Vertical Flange Hanger
PART NO.
Suspends #12, #10, #9 or #8 wire, 1/4” or 3/8” plain or threaded rod from vertical flanges (FH).
FH116 FH532
PKG QTY 100 100
DESCRIPTION 1/16” TO 5/16” VERTICAL FLANGE 5/32” TO 1/4” VERTICAL FLANGE
Suspends 1/4” or 3/8” threaded rod from vertical flanges 1/16” to1/4” thick (RF). Static load capacity: 160lbs (RF). PART NO.
Suspends #12, #10, #9 or #8 wire, 1/4” or 3/8” plain or threaded rod from vertical flanges (FH).
RF53214T RF53238T
PKG QTY 100 100
DESCRIPTION 5/32” TO 1/4” VERTICAL FLANGE FOR #8 WIRE OR 1/4” THREADED ROD 5/32” TO 1/4” VERTICAL FLANGE FOR 3/8” THREADED ROD
Suspends 1/4” or 3/8” threaded rod from vertical flanges 1/16” to1/4” thick (RF). Static load capacity: 160lbs (RF).
Angle Flange Hanger
PART NO.
Fits 1/16” to 1/4” thick Z-Purlin (ABC25) or vertical flanges (VBC25). Accommodates tooling for floor installations.
ABC25
ABC25
ABC25 VBC25
PKG QTY 100 100
DESCRIPTION 1/16” TO 1/4” FOR ANGLED FLANGE FOR S-HOOKS, PERF. STRAP & WIRE 1/16” TO 1/4” FOR VERT FLANGE FOR S-HOOKS, PERF. STRAP & WIRE
Works with Caddy® VAFT or Ramset L1700 installation tools.
VBC25
Spring Steel Hangers Beam Clip Hangers
PART NO.
Installed with hammer on bulb tees and beams with static load capacity of 200lbs.
SFC18 SFC516 SFC916
PKG QTY 100 100 100
DESCRIPTION 1/8” TO 1/4” FLANGE BEAM CLAMP 5/16” TO 1/2” FLANGE BEAM CLAMP 9/16” TO3/4” FLANGE BEAM CLAMP
Clearance for 1/4” bolt in tab.
www.grabberman.com
7
A 100% Employee Owned Company “The Professional’s Choice”TM
Spring Steel Hangers Rod to Beam Clip Assembly
PART NO.
Installed with hammer on bulb tees and beams with static load capacity of 200lbs.
R1814 R51614 R91614
PKG QTY 100 100 100
DESCRIPTION 1/8” TO 1/4” ROD TO BEAM CLIP ASSEMBLY 5/16” TO 1/2” ROD TO BEAM CLIP ASSEMBLY 9/16” TO3/4” ROD TO BEAM CLIP ASSEMBLY
Accepts #8 wire or 1/4” plain rod.
Offset Bracket Fastener
PART NO.
Accepts #8 wire or 1/4” plain rod.
R014
PKG QTY 100
DESCRIPTION OFFSET BRACKET FASTENER
Accepted by the City of New York.
Angle Bracket Fastener
PART NO.
Accepts #8 wire or 1/4” plain rod.
RA14
PKG QTY 100
DESCRIPTION ANGLE BRACKET FASTENER
Accepted by the City of New York.
Sign Hangers
PART NO.
Secures hanging signs from standard T-bar.
BA416H1
PKG QTY
DESCRIPTION
100
T-BAR SIGN HANGERS
PKG QTY
DESCRIPTION
No tools required.
Rod Hangers
PART NO.
Fits 1/2” through 5/8” channel flange widths. Accepted by city of New York, Dept. of Building, MEA 383-91-M.
8
GRABBER Construction Products
BL244
100
1/4” ROD HANGER TO 1-1/2” LATHERS CHANNEL
A 100% Employee Owned Company “The Professional’s Choice”TM
Self-Seating Acoustical Toggle
SpringShotTM Self-Seating
ACOUSTICAL TOGGLE BOLT The new standard in acoustical toggles. Installation is as simple as: 1. Prepare an opening as usual 2. Insert the toggle 3. Adjust if needed
US Patent # 5,702,218 US Patent # 5,898,987 Canadian Patent # 2,184,422
ZINC & YELLOW DICHROMATE PLATED Item No. SFAST ANCHOR - 1/4 X 5 SPRING TOGGLE Packaged 100 per box @ 11lbs.
The SpringShot Acoustical Toggle easily installs into various material thicknesses with little or no adjustment.
Special spring design Self tightening & self-seating One size fits all applications Helps eliminate migrating sounds Will not loosen under vibration Project designer preferred
The patented SpringShot™ Acoustical Toggle is widely popular with the trades because of its ease of installation. Designers have recognized the SpringShot Acoustical toggle’s features as a significant advancement to traditional overhead fastening toggle bolts rendering the old fashion toggles obsolete. The SpringShot’s self-centering washer is a vast improvement over old style acoustical toggles, making correct installation effortless. The patented spring action provides continuous pressure keeping the toggle fixed and secure, and won’t loosen over time even with vibration. www.grabberman.com
9
A 100% Employee Owned Company “The Professional’s Choice”TM
Wedge Anchors
TIE WIRE WEDGE ANCHOR PART NO. TW1400
PLATING:
5/16”
PKG QTY 100
WEIGHT 5lbs
DESCRIPTION 1/4” X 2-1/8” TIE WIRE WEDGE ANCHOR
• Zinc plate to ASTM B633-85,SCI, Type III
PERFORMANCE: • Ultimate tension load 1908 lbx/SPALL 5500 PSI concrete
302 Stainless Steel 360° Expansion Clip 1015 - 1022 Carbon steel roll formed body
2-1/8”
5/16” Diameter hole for use with the wire and prefabricated suspension system installations
1-3/8”
A very versatile anchor For various overhead suspension applications. Meets or exceeds design criteria and varied installation requirements for overhead expansion applications. 1/4”
TIE WIRE SPIKE
®
PART NO.
PLATING:
R3756 R3759
PKG QTY 100 100
WEIGHT 2lbs 2.5lbs
DESCRIPTION 3/16” X 1-1/4” TIE WIRE SPIKE ANCHOR 1/4” X 1-1/4” TIE WIRE SPIKE ANCHOR
• Zinc plate to ASTM B633-85,SCI, Type III
PERFORMANCE: • Ultimate tension load based on testing in 2000, 3000, 4000 and 5000 PSI concrete.
The SPIKE® is a patented, one-piece, vibration resistant anchor. The pre-expanded mechanism of the SPIKE® anchor is activated as the anchor is driven into the drilled hole creating a spring type compression force against the walls of the hole. Ultimate load capacities are based on testing in 2000, 3000, 4000 and 5000 PSI concrete. Specifications and data for pullout, shear, and tensile strength etc. is available on request.
10
GRABBER Construction Products
A 100% 110000% % EEmployee mpllooyyeee Owned mp OOwwne ned Company CCoom mppaanny “The Professional’s Choice”TM
Acoustical Tools and Products Bright Tension Pins
PART NO.
Tempered steel tension pins.
ATP ATPFP
BULK WEIGHT 50lbs N/A
DESCRIPTION 1-1/8” BRIGHT MOLDING NAILS 1-1/8” BRIGHT MOLDING NAILS
Eight - Five pound pails per master carton.
Fence Staples
PART NO.
Galvanized steel. Eight - Five pound pails per master carton.
Grid MatchTM Rivets
AFS112 AFS112FP AFS134 AFS134FP
PART NO.
White rivets. Ten - 1000 count boxes per master carton.
ARW42CP
PART NO. ARW4210M (MAB42AEW)
Rivet Drill Bit
PART NO.
Double ended split points.
ARBIT
BULK WEIGHT 50lbs N/A 50lbs N/A
9 X 1-1/2” GALVANIZED FENCE STAPLES 9 X 1-1/2” GALVANIZED FENCE STAPLES 9 X 1-3/4” GALVANIZED FENCE STAPLES 9 X 1-3/4” GALVANIZED FENCE STAPLES
BULK WEIGHT 11lbs
PKG QTY 10m
PKG QTY 12
DESCRIPTION
DESCRIPTION #42 POP RIVIETS - WHITE
DESCRIPTION BULK POP RIVITS - WHITE
DESCRIPTION #30 DOUBLE ENDED SPLIT POINT DRILL BIT
12 per pack.
Klick-Fast Riveter Heavy duty model. HP-2
PART NO.
DESCRIPTION
AHP2
HP-2 RIVET TOOL
Includes 4 nosepieces to set rivet diameters from 3/32” to 3/16”.
Sur-Punch® 45° Grid Punch Pliers Punches a perfect 1/8” hole upt to three layers of ceiling grid.
PART NO.
DESCRIPTION
PUS01
45° ACOUSTIC CEILING GRID PUNCH PLIERS
45° angled head.
1/8” Grid Punch Pliers Ideal for 9/16” ceiling grid.
PART NO.
DESCRIPTION
MT MTK
1/8” ACOUSTIC CEILING GRID PUNCH PLIERS 1/8” ACOUSTIC CEILING GRID PUNCH PLIERS REPAIR KIT
PART NO.
DESCRIPTION
LIJ450 LIJ1400
450 FT ACOUSTIC CEILING GRID ALIGNMENT LINE 1,400 FT ACOUSTIC CEILING GRID ALIGNMENT LINE
Rubber handle ensures a comforable and secure grip. Total length - 9-1/2”.
Ceiling Grid Alignment Line (Jet Line) Ceiling grid alignment line is available in 450 and 1,400 foot lengths.
Leaver Action Ceiling Clamps
PART NO.
All metal construction with rubber inserts.
CLR01
PKG QTY 48
DESCRIPTION RUBBER TIPPED LEVER ACTION CEILING GRID CLAMP
Won’t scratch painted surfaces.
Heavy Duty Spring Clamps
PART NO.
Heavy duty metal spring clamps.
CLS4H CLS6H
PKG QTY 12 12
DESCRIPTION 4” HEAVY DUTY METAL SPRING CLAMP, RUBBER TIPPED 6” HEAVY DUTY METAL SPRING CLAMP, RUBBER TIPPED
Available in 4” and 6” sizes.
www.grabberman.com
11
A 100% Employee Owned Company “The Professional’s Choice”TM
VIPER .27 caliber strip TOOLS
DESCRIPTION .27 Caliber Strip Tool Semi-Automatic Designed Specifically for Overhead Applications 3 Year Warranty
.27 caliber 10-shot strip loads, 3 (Green), 4 (Yellow), 5 (Red) Weight: 4.5 lbs. Length: 17” Maximum Pin Length: 1-1/2”
ADVANTAGES AUTOMATIC LOAD ADVANCE:
Load is advanced consistently each time the Viper is fired.
SIMPLIFIED BARREL RETENTION COLLAR: No tools are required for assembly or disassembly.
STABLE STEEL COLLAR:
No time spent manually resetting or cycling the tool. Allows you to work faster.
The Viper screws securely into the end of the extension pole with the steel collar ensuring a more durable and rigid connection.
OVERDRIVE PROTECTION:
USES EXISTING VIPER POLE SYSTEM:
AUTOMATIC PISTON RETURN:
Heavy duty buffer system prevents front end damage caused by piston overdrive —especially through sprayed-on insulation.
Works with the existing family of durable Ramset poles.
OPEN FRONT-END DESIGN:
Completely redesigned open-ended muzzle keeps your tool cleaner longer.
FASTENERS ELECTRICAL PIN/CLIP ASSEMBLIES
Preassembled Pin & Clips for some of the most common electrical applications increase jobsite speed for the electrician.
STANDARD PIN/CLIP ASSEMBLIES
SDC Fasteners are designed with special dimples on the angle clips which act as a shim and assure a snug fit between the structural member and the clip.
POWERPOINT® PIN/CLIP ASSEMBLIES
SPC Fasteners are assembled with the patented technology of PowerPoint pins for penetration in hard concrete and steel. The uniform shape and finish of the engineered tip results in more consistent performance in your toughest situations.
EXTENSION POLES FIXED LENGTH LENGTH 6’ 8’
PART # VPOL6 VPOL8
COMMON REPLACEMENT PARTS MVP500AP MVP140
12
Advance Lever Assembly Piston
GRABBER Construction Products
MOST COMMON FASTENERS ERS
PIN#
14TRHSS10 SDC125 SPC114
SHANK LENGTH IN. (MM) 1 25.4 1-1/4 31.8 1-1/4 31.8
MOST COMMON APPLICATION Threaded Rod Hanger Ceiling Clip Ceiling Clip
A 100% Employee Owned Company “The Professional’s Choice”TM
POLE TOOL TM
SOLID PROPELLANT FASTENING SYSTEM
TRIPLE PLAY
TM
Ceiling Track Wall
Three applications. . .only one tool
TOOL HANDLE
Nitroset takes key safety and environmental concerns into consideration when manufacturing its Solid Propellant Fastening System. Powered by nitrocell charges rather than traditional primer or gunpowder, Nitroset is able to cleanly drive nails into hard aggregate concrete surfaces, and incorporates Triple Play versatility. Its lightweight and low-profile design makes it easy to handle and be put to use in tight spaces. Operation is considerably quieter than explosive charges, making the Nitroset system ideal for occupied buildings. Plus, Nitroset is 100% lead free, keeping it in compliance with OSHA and no-lead worksite requirements!
ADVANTAGES LIGHTWEIGHT & EASY TO USE Low profile design for tight spaces
PINS NITRO PIN NS
Fits with NITROSETTM handle or extension pole
UNIQUE ENTRY SYSTEM PROVIDES ADDED SAFETY Not regulated as “Class 1 Explosive Material” by the DOT (REF. EX2009040168) Non-toxic & non-hazardous material supported by MSDS report Completely LEAD FREE in compliance with OSHA CFR 1926.62
REDUCED USAGE COSTS No license requied for operation, only training* No storage or shipping restrictions determined by the DOT No special job site clean up costs No special cleaning solution required to maintain the tool *According to ANSI A10.3 NITROSETTM tools are not classified as a powder acuated tool, thus no licensing is required prior to use.
NITRO TOOLS AND EXTENSION POLES ITEM NO. NTS5X - TP NTS5X TOP8V TOP12V TOP123V TOP183V
DESCRIPTION Nitroset Fastening Tool Kit w/ Hand Grip & Extension Nitroset Overhead Fastening Tool Kit 4’ - 8’, 2-Section, Alum. Pole for Nitroset with rubber grip 6’ - 12’, 2-Section, Alum. Pole for Nitroset with rubber grip 4’ - 8’ - 12’, 3-Section, Alum. Pole for Nitroset with rubber grip 6’ - 12’ - 18’, 3-Section, Alum. Pole for Nitroset with rubber grip
NITRO FASTENERS ITEM NO. PIN222W PIN219Y CLAS325L CLAS332L CLAS525LS CLAS532LS
QTY. .5m 1m 100pcs 100pcs 100pcs 100pcs
DESCRIPTION 7/8” x.125 Pin w/ Solid Propellant NC pill (Yellow) & washer 3/4” x .125 Track Pin 1” x 0.145 Straight Shank Pin & Clip without Silencer (4000PSI) 1-1/4” x 0.145 Straight Shank Pin & Clip without Silencer (4000PSI) 1” x 0.152 - 0.130 Step Shank Pin & Clip with Silencer (6000PSI) 1-1/4” x 0.152 - 0.130 Step Shank Pin & Clip with Silencer (6000PSI)
*Pre-tied wire with NITRO fasteners are also available. See pre-tied wire section in this catalog for a complete list. *Custom pins and clip combinations are avilable upon request.
www.grabberman.com
13
A 100% Employee Owned Company “The Professional’s Choice”TM
Glue it, Seal it & Protect it with Grabber! Grabber professional strength adhesives and acoustical sealant are products that perform...this time and every time. Grabber professional strength acoustical sealant and adhesives meet and exceed industry standards. Our application specific family of products all carry our money back guarantee.
GrabberGard fire caulks and sprays have been tested in accordance with rigorous industry standards and have been determined to be fungi resistant.
Underwriters Laboratories Inc.
®
Professional Strength Drywall Adhesive High quality, non-staining waterproof adhesive developed for adhering drywall to structurally sound surfaces. Primarily designed for bonding gypsum board to wood or metal studs, laminating gypsum board to gypsum board, and bonding gypsum board to concrete or block walls. When applied as directed, this adhesive combined with the approved mechanical fastener is the preferred method for permanent, safe installations without weak points. Product is widely used in new construction of single-family and multi-family homes, manufactured housing, commercial construction, and all remodeling and renovation projects where gypsum products are installed. Helps eliminate nail-pops and call backs Reduces mechanical fasteners up to 50-60% Provides for greater strength and safety in wall & ceiling assemblies without weak points
Bridges minor framing irregularities Waterproof and weatherproof Unaffected by cold weather
GrabberGard Endothermic Fire Caulk A single component smoke and fire stopping sealant for wall and floor penetrations and other construction gap applications. During a fire, GrabberGard EFC absorbs heat and provides a fire barrier against fire and smoke.
Available in:
10 oz. cartridge - Item No. GGEFC10 20 oz. sausage - Item No. GGEFC20 29 oz. cartridge - Item No. GGEFC29 5 gallon buckets - Item No. GGEFC5
Item No. GDWA
Professional Strength Sub-floor Adhesive Premium grade construction adhesive developed for Glued Floor Systems. Product is designed for interior or exterior use and forms a permanent waterproof and weatherproof bond to dry, wet, frozen lumber, either treated or untreated with high sheer strength. Adhesive is easy to use both on the job or on the production line. Ideal for use in most building projects that require adhesives. All weather formula Reduces nail pops and call backs Exceeds APA AFG-01 Specifications Bonds to most building materials with fast grab and high strength
Allows single layer floor construction Reduces installation costs Permits extended spans
Item No. GSFA
GrabberGard Intumescent Fire Caulk A single component smoke and fire stopping sealant for wall and floor penetrations and other construction gap applications. During a fire, GrabberGard IFC expands to maintain a tight seal against fire and smoke.
Available in:
10 oz. cartridge - Item No. GGIFC10 20 oz. sausage - Item No. GGIFC20 29 oz. cartridge - Item No. GGIFC29 5 gallon buckets - Item No. GGIFC5
Professional Strength Acoustical Sealant Non-flammable, water-based product developed specifically for the reduction of sound transmission in all types of wall partition systems. Easy application and easy cleanup. Used correctly and as directed, sealant will achieve and maintain specific STC (Sound Transmission Class) values specified for various wall system designs. This product should be used in office buildings, sound studios, hospitals, schools, hotels and motels, apartment complexes, and other areas where sound ratings are required. This sealant is also ideal for sealing out air infiltration and unwanted moisture in residential construction. Non-hardening, non-staining & non-migrating Maintains flexible seal against air-borne sound, air infiltration and moisture
Item No. GSCS
14
GRABBER Construction Products
Easy application and easy cleanup UL tested and classified Low VOC green certified product
GrabberGard Endothermic Fire Spray GrabberGard EFS is a effective fire-stop for joint assemblies, such as floor, floor to wall, wall, head of wall, and curtain wall to slab edge, in any combination of wood, concrete, concrete block, steel and gypsum materials.
Available in: 5 gallon buckets - Item No. GGEFS5
A 100% Employee Owned Company “The Professional’s Choice”TM
Specifications and Data
Coatings and finishes Salt spray results ASTM B117 24-48 hours, no red rust
Clear Zinc
Recommended for interior applications and exterior application that will be encapsulated the fasteners, i.e. attachment of lathing prior to application of stucco.
Salt spray results ASTM B117 48-96 hours, no red rust
Yellow Zinc
Recommended for interior applications and exterior application that will be encapsulated the fasteners, i.e. attachment of lathing prior to application of stucco.
Specifications Due to variations in wood density, softness of hanging wire and unknown condition of existing overhead, accurate pullout loads cannot be determined without actual on-site testing. With full thread engagement of lags and four twist of soft wire, approximately 400 pounds of working load can be achieved. Ultimate tensile strength on bolt portion of toggle is 870 pounds. A safety factor of 10 to 1 should be applied to determine design load of overhead fastening applications. Spring Steel Fasteners L1801 R014 RA14 R1814 RS1614 R5154 R91614 BA416H1 A2H SFC SERIES *FS SERIES
PERLIN HANGER OFFSET BRACKET ANGLE BRACKET BEAM CLIP BEAM CLIP BEAM CLIP BEAM CLIP SIGN HANGER ANGLE CLIP BEAM CLIP ASSEMBLY BEAM CLIP ASSEMBLY
Ultimate Static Load
Spring Steel Fasteners
270 lbs. working load 160 lbs. 160 lbs. 160 lbs. 200 lbs. 200 lbs. 200 lbs. 40 lbs. 200 lbs. 160 lbs. 160 lbs.
ZINC PHOSPHATE MIL-P 16232 TYPE Z
2-Hole Angle ZINC ASTM B 633
A safety factor of 3 to 1 should be applied to ultimate static load to determine design load.
*The FS series is accepted by the city of NY, Dept. of BLDG. MEA 383-91-M
Tie-Wire Wedge Ultimate Pullout Load
Ultimate pullout 1559 pounds in 4000 concrete, ASTM - 488 anchor, ASTM B-633-85 plating.
Deck Lags Drill Point - Ultimate Tension 22 ga. 135 lbs.
20 ga. 170 lbs.
18 ga. 245 lbs.
3000 psi Concrete 96 lbs.
Ultimate load capacities are based on testing in 2000, 3000, 4000 and 5000 PSI concrete. Specifications and data for pullout, shear, tensile strength etc. is available.
Deck Lags Sharp Point - Ultimate Tension
16 ga. 240 lbs.
22 ga. 180 lbs.
Three thread engagement for maximum pullout in steel. ICBO ER 5367
Angle Clip Assembly Zinc Coated ASTM B 633
Tie-Wire Spike Ultimate Pullout Load
Wood (.046 specific gravity) 245 lbs.
Full thread engagement for maximum pullout in wood.
4000 psi Concrete 98 lbs.
A safety factor of 8-1 is included
Fasteners shown in this catalog are not guaranteed as to suitability for specific purposes. Published values contained within this catalog are the results of independent testing. Holding power depends on the quality of the material being fastened. These published values are to serve as a guideline only and are not a guaranteed in any way, written or verbal by Grabber Construction Products Inc. or any of it’s distributors. All figures indicated are average values, however, reference should always be made to applicable building codes for the specific safe working loads.
www.grabberman.com
15
Grabber has you covered with more than just great fastening products. . . Drywall Screws Metal Framinig Screws Concrete Anchors Pneumatic Nails
Fasten it
SuperDrive Screw Guns Chop Saws Lasers
Drive it
Subfloor Adhesives Drywall Adhesives Acoustical Sealants Fire Stopping Caulks
Caulk it
NO-COAT® Stick Products NO-COAT® ULTRAFLEX Drywall Tape Finishing Tools
Finish it
To put it simply, Grabber can help you build a better product while simultaneously making you more money. Through constant innovation, Grabber continues to simplify the way you work by providing the best, most technologically advanced products available today.
Grabber has a full line of fasteners for just about any application. From drywall screws to heavy gauge framing screws Grabber has what you need. Grabber invented the drywall screw and changed an entire industry. For the past 40 years Grabber has been the name you can trust for professional grade fasteners.
Grabber’s SuperDrive tool is designed to make driving screws faster and more accurate. Along with SuperDrive, Grabber offers many other tools that make your work easier including chop saws, routers, lasers and more.
Grabber offers a complete line of caulks including sound control sealants, subfloor adhesives, drywall adhesives, insulation foam and more. Grabber also offers EFC and IFC fire stopping caulks and sealants.
Grabber has everything you need for finishing your drywall projects. From fiberglass mesh tape and spark perforated drywall tape to NoCoat’s innovative structural drywall system, Grabber has what you need to do the job right
Visit www.grabberman.com or call 800-477-8876 to find a dealer near you. www.grabberman.com
Grabber is an international distributor and manufacturer of premium fasteners and fastening systems for wood, metal, and drywall applications in the commercial and residential construction markets. Grabber is home to the Deckmaster® Hidden Fastening System, the patented LOX® Drive System, and the SuperDrive Auto-Feed Fastening System. Grabber also distributes a wide range of proprietary tools and accessories, various equipment, and building materials to the construction industry.
All Grabber screws meet or exceed the specifications in shear and pullout values for ICBO/ICC ER 5280. Shear, pullout and other technical information is available at www.grabberman.com. Grabber screws are produced in an ISO 9002 and ISO 14001 approved and certified environment.