DURO PRODUCTS 2013 PRODUCT GUIDE & PRICE LIST
CUT IT
DRILL IT GRIND IT BREAK IT
INTRODUCTION
PERFORMANCE LEVELS
02
03
CUT IT / DRILL IT / GRIND IT / BREAK IT
SELECTING THE RIGHT PERFORMANCE LEVEL FOR YOU In selecting a DURO tool, you will benefit from industry leading cost to performance ratios. To be sure you get exactly the right tool for your needs, we offer four clearly defined performance levels. The Top-Line from DURO, where maximum performance is the only consideration during the product design process. The very best quality raw materials are utilised to ensure the highest possible output.
The Pro-Line from DURO, offering professional level tools at very competitive price levels. This range is renowned for offering great quality, performance and value tools with very high output.
Welcome to the 2013 DURO product guide and price list with lots of new and innovative products included with a particular focus on safety. One of the highlights of which are two new ranges of noise reduced diamond blades both in the DURO ULTRA line and offering noise reductions of over 12dB(A). With a range for the professional construction worker and a separate range for the utility contractor, we believe we have the most comprehensive line up of noise reduced diamond blades available today. With 17mm segments (DUCM-SILENT) delivering huge performance and hi-tech, multi-layered, sound deadened steel cores, these blades not only protect users, co-workers and the public from the potential hearing damage that can occur through the use of standard diamond blades but also protect employers from costly litigation further down the line. Silent blades are listed on page 18. Another product worthy of mention is our totally new DP-DST-13L dust-suppression tank with built in pressure relief valve and hose length increased to 4m to improve usability. The quality of materials used is much improved and we have created new POS packaging to help users understand the need for using these devices whilst cutting with disc cutters to protect themselves against very harmful crystalline silica dust. In fact safety has its own section in the 2013 catalogue highlighting the many advantages offered by using DURO products.
The Standard-Line from DURO, with a broad product range and many tools offering performance levels well above industry standard, the output of these tools is very good.
The Entry-Line from DURO, where price and performance are matched to offer great value output throughout the range.
THE ALL NEW MERCHANDISING SYSTEM FROM DURO DURO have developed a fully modular point of sale system that can cater for all product types. These units can be free standing, wall mounted or form part of a tool wall system offering the distributor a full list of options.
You’ll find the DP-DST-13L on page 20. Also updated for this year we have re-vamped all our merchandising, display and POS materials. Tool-bars, counter units and other bespoke solutions are all now available to enhance and drive sales of DURO products in store. Merchandising and POS solutions can be seen on pages 76 and 77.
Visit us at:
www. duro- diamonds. com Our products all comply with the relevant EN European Standards and are manufactured in accordance with ISO 9000. DURO UK Ltd is an ISO 9001 and ISO 14001 registered Firm. Our office hours are; Monday to Thursday: 8.30am – 5.00pm Friday: 8.30am – 4.00pm
CORE DRILL LECTERNS FREESTANDING / COUNTER TOP OR WALL MOUNTED UNITS
INDEX
PRODUCTS, MARKETING & TECHNICAL 04
05
02 INTRODUCTION 03 PERFORMANCE LEVELS / POINT OF SALE 06 ESSENTIAL SELECTION 08 10 11 12 13 14 15 16 18 20 22 24 26 28 30 31 32 33 34 36
DIAMOND BLADES: HEALTH AND SAFETY COVERED DIAMOND BLADES: BLADE APPLICATION GUIDE DIAMOND BLADES: HARD MATERIALS DIAMOND BLADES: UNIVERSAL CONCRETE & BUILDING MATERIALS DIAMOND BLADES: CONSTRUCTION MATERIALS DIAMOND BLADES: ASPHALT & ABRASIVE MATERIALS DIAMOND BLADES: MULTIPLE APPLICATIONS - CONSTRUCTION DIAMOND BLADES: MULTIPLE APPLICATIONS - CIVIL ENGINEERING DIAMOND BLADES: SILENT USE FOR CONSTRUCTION & CIVILS DUST SUPPRESSION: TANK / ACCESSORIES 2 STROKE OIL: 1 SHOT / 1 LITRE / 5 LITRE MORTAR RAKERS: MORTAR RAKING BLADES & CORES MULTI USE BLADES: MULTIPLE MATERIALS / RESCUE / RAIL SPECIAL APPLICATIONS: RING / LOOPING / BRICK BLADES DIAMOND CORE DRILLS: DRY DIAMOND CORE DRILLS DIAMOND CORE DRILLS: DRY DIAMOND CORE DRILL KITS DIAMOND CORE DRILLS: DRY CORE DRILL ACCESSORIES DIAMOND CORE DRILLS: WET DIAMOND CORE DRILLS DIAMOND CORE DRILLS: WET CORE DRILL ACCESSORIES CUT N GRIND: COMBINATION DIAMOND BLADE/GRINDER
37 38 40 42 44 46 47 48 50 51 52 54 56 58 60 64 65 67 69 70 72 74 76 78 80 84 85
DIAMOND GRINDERS: CUP GRINDERS DIAMOND GRINDERS: FLOOR GRINDERS CONCAVE DIAMOND BLADES: CURVED CUTTING CARBIDE RIPPA BLADES: MULTI-USE SABRE SAW BLADES: MULTI-USE CIRCULAR SAW BLADES: CARBIDE TIPPED FOR WOOD CIRCULAR SAW BLADES: FOR WOOD WITH ANTI-KICKBACK CIRCULAR SAW BLADES: FOR METALS & PLASTICS DIAMOND TILE DRILLS: VERY HARD TILES / GRANITE / GLASS DIAMOND HOLE SAWS: MULTI-PURPOSE DIAMOND TILE DRILLS & HOLE SAWS: ACCESSORIES DIAMOND TILE BLADES: PORCELAIN & CERAMIC HAMMER DRILLS: SDS PLUS HAMMER DRILLS: SDS MAX SDS PLUS CHISELS: POINTS / CHISELS & INNOVATIONS SDS MAX CHISELS: POINTS / CHISELS & INNOVATIONS SDS MAX BREAKER STEELS: MULTI-USE GENERAL BREAKER STEELS: PNEUMATIC GENERAL BREAKER STEELS: ELECTRIC GENERAL BREAKER STEELS: ACCESSORIES ABRASIVE DISCS: STEEL & INOX / STEEL ABRASIVE DISCS: STONE MERCHANDISING DURO SUPPORT TECHNICAL INFORMATION: APPLICATIONS / SPEEDS PRODUCT IDENTIFICATION: LABELLING / ETCHING TERMS & CONDITIONS OF SALE
SAVE MONEY WITH THE ESSENTIAL SELECTION FROM DURO! Throughout this catalogue you will see a number of products marked with the Essential Selection logo. These products represent some of our most popular and fastest moving items and are now available to you with new special lower prices linked to volume purchases. The range covers blades, drills and dust suppression tanks. So if you have a large requirement for certain items maybe we can help you save money and increase profitability by buying in bulk. A lot of these products are also packaged in special livery to show more product application and technical information for the end user. If you would like to know more, then please contact your DURO Area Sales Manager for details of the Essential Selection range and what we can do to support you in saving money when placing your next order. The Essential Selection from DURO.
DIAMOND BLADES
HARD MATERIALS UNIVERSAL CONCRETE & BUILDING MATERIALS CONSTRUCTION MATERIALS ASPHALT & ABRASIVE MATERIALS MULTIPLE APPLICATIONS - CONSTRUCTION MULTIPLE APPLICATIONS - CIVIL ENGINEERING
SAFETY SAFETY duro have it covered duro have it covered THE STRONGEST WELDS IN THE WORLD BY DURO PATENTED, HIGH DENSITY FORGED, DIAMOND BLADE TECHNOLOGY - THE SAFEST BLADES On the MARKET... BAR NONE! HDF Segments are simultaneously heated to a very high temperature & pressed (stamped) to form a complete diamond segment within seconds. Advantages are that each segment has incredibly high density & almost no porosity (gaps in the system filled with oxygen). Resulting weld strengths are almost 60% higher than before, with the steel core actually bending in side load tests before any weld failure. This weld strength could eliminate the potential of a segment breaking away from the steel core. High density quality also gives increased durability, speed of cut & smoothness of cut and therefore reduced Hand Arm Vibration in use. Use of titanium powders in the bond system increase diamond grit retention by up to 30%, giving huge life performance advantages. COMPETITOR WELDING High-porosity and gaps in the weld.
Near to zero porosity and a complete weld with astounding strength
THE LOWEST VIBRATION BLADES BY DURO proven at operc* to greatly reduce HAv levels of EXPOSURE - the safest BLADEs On the MARKET... BAR NONE! HDF blades have been proven in independent tests to greatly reduce the level of HAV exposure to the user. Testing at OPERC* revealed that HDF blades from DURO achieved an impressive 2.8m/s2 magnitude. The lowest level of vibration recorded at OPERC. This enables users to cut with HDF blades for longer periods of time and have confidence that they will not expose themselves to HAV levels that could lead to ‘white finger’. HDF diamond blades are highlighted throughout the catalogue with a small HDF logo in the product box.
noise reducED BLADES BY DURO major developments in noise reduction
DURO silent centre blades reduce noise by over 12 db(a) DURO have introduced two new ranges of SILENT, noise reduced diamond blades. The new DUCM-SILENT in diameters from 115300mm and the new DUA/C-SILENT are both Top Line - DURO ULTRA products aimed at the construction professional. DUCM-SILENT (17mm) and DUA/C-SILENT (13mm) laser welded conical segments are combined with a new high technology Multi-Layer steel core producing amazing results in noise and vibration reduction.
The new conical segment design reduces air flow around the blade in motion, a significant contributor to noise creation when cutting with a diamond blade. The new Multi-Layer steel core further takes tension and as a result, resonance from the blade in use: resulting in over 12dB(A) lower sound emission.
dust suppression BY DURO developing product and awareness
DURO dust suppression WATER tanks
“Cutting paving slabs, kerb stones or other concrete or stone products produces enormous amounts of dust. This dust will contain some very fine particles called respirable crystaline silica (RCS). Exposure to RCS can cause serious health problems which may eventually prove to be fatal.” This is an extract from HSE in the UK and details how dangerous cutting construction materials can be. HSE Regulations require the use of ‘the most effective and reliable control options to minimise the escape and spread of RCS’. The new DURO dust suppression tank is designed specifically for this purpose and is now available with new safeguarding features: • Automatic pressure relief valve • 13 litre capacity • Integral hose connections • Robust, long lasting external pipe • Internal, ‘debris-stop’ filter • Solid & robust pump mechanism • Water resistant external warning and advice label • 4m length external hose
OSA COMPLIANT / EN13236 STANDARDS
*HAVTEC is the OPERC vibration testing facility. It provides independent assessment of the hand-arm vibration (HAV) exposure that an operator will be exposed to from the use of mechanical hand-held power tools.
All DURO blades are manufactured to EN13236 specifications set out for the manufacture and performance of cutting blades. The vast majority of DURO diamond blades are also certified by OSA.
BLADE APPLICATION GUIDE 10
DIAMOND BLADES HARD MATERIALS
APPLICATION SELECTION BY COLOUR CODING DIAMOND BLADE:
All DURO diamond blades (except DURO BASE) have a colour coded section on the label to match the material application type. Please ensure that your blade selection matches the material you intend to cut.
11 DUH
DESCRIPTION:
SEGMENT HEIGHT:
10MM BOTH
DRY/WET:
SEGMENTED NARROW GULLET
SEGMENT TYPE:
HARD MATERIALS
NO
VENTILATION:
White colour indicates highly dense and very hard materials such as granite, slate, Class A engineering bricks, clay products, flint, concrete, heavily reinforced concrete.
CORE PROTECTION: NOISE
HARD MATERIALS A laser welded, noise reduced blade with narrow gullet design to avoid chipping. Very fast cutting with long life. APPLICATIONS:
• Indian stone • Granite • Engineering bricks • Clay products • Reinforced concrete • Bricks • Concrete products
REDUCED
UNIVERSAL/CONCRETE DIAMOND BLADE:
Grey colour indicates universal use in most hard to medium hard materials such as reinforced concrete, Class B engineering bricks, kerbs, lintels, beams, cast pipes, flags and general building materials.
DPH
SEGMENT HEIGHT:
CONSTRUCTION MATERIALS
DESCRIPTION:
10MM BOTH
DRY/WET:
Yellow indicates that this product is designed to give the longest lifetimes with high in-feed rates in the widest possible range of construction materials, from the hardest engineering bricks and reinforced concretes to paviors, soft blocks and roof tiles - and even the ability to occasionally cut asphalt - all in one blade.
SEGMENT TYPE:
CONTINUOUS TURBO RIM YES
VENTILATION: CORE PROTECTION:
ASPHALT
NO
HARD MATERIALS A cutting blade with continuous turbo rim design to avoid chipping and special cooling holes. Fast cutting with good life. APPLICATIONS:
• Indian stone • Granite • Engineering bricks • Clay products • Reinforced concrete • Bricks • Concrete products 450mm is segmented not continuous rim
Black indicates extremely abrasive materials such as, soft cement screed, lightweight concrete and cellular block, abrasive sandstone and grit stone, as well as tarmac and hot rolled asphalt on roads and pavements. METAL / STONE Red indicates that this product is designed for cutting more or less anything on the construction site including, but not exclusively, various types of metal. The special shape, with air cooling holes drilled into the steel core, coupled with the use of a very large diamond grit, allows these blades to cross the barrier in diamond technology and eliminate the need for changing blades when it is necessary to cut metal. CONCRETE
ASPHALT
The use of both grey and black indicates that this product is highly suited to both concrete and asphalt applications. Either application is possible exclusively or jointly, with similar results. ASPHALT
CONCRETE
HARD MATERIALS
METALS
The use of four colour codes makes this specification our most universal. Cut almost any material, excluding heavy metal applications (below 5mm gauge) with absolute ease and security, whilst benefiting from very high life times. The use of titanium coated diamond and high density bonds, coupled with innovative design features, including deep draft segments and cooling holes in the steel core put this product on the very highest level of performance. BUILDING MATERIALS This is the application type of our DURO BASE entry line blades and this indicates that the blades are suitable for universal use in most medium to hard building materials, including lightly reinforced concrete, medium hard bricks, blocks and stones.
All DURO blades can be either bushed to reduce the bore or bored out to increase the bore to suit your requirements. Bore sizes of 15.00 (cup grinders only), 16.00, 20.00, 22.25, 25.40 & 30.00mm can be achieved.
BRAND
BUSHING AND RE-BORING DIMENSIONS
DUH
DPH
(4½”) 115 x 22.2
£32.37
(5”) 125 x 22.2
£35.60
(9”) 230 x 22.2
£70.23
(12”) 300 x 20.0
£210.38
£124.07
(14”) 350 x 20.0
£258.93
(14”) 350 x 25.4
£167.23
(18”) 450 x 25.4
£267.56
ORDER LINE: 01909 552470
DIAMOND BLADES
DIAMOND BLADES
UNIVERSAL CONCRETE & BUILDING MATERIALS 12 DIAMOND BLADE:
DESCRIPTION:
DUU/C 17MM
SEGMENT HEIGHT:
CONSTRUCTION MATERIALS
BOTH
DRY/WET:
SEGMENT TYPE: N ARROW GULLET
DIAMOND BLADE:
UNIVERSAL CONCRETE A laser welded blade with patented high density forging technology. Narrow gullet design to aid cooling. Very fast cutting with a long product life.
YES
CORE PROTECTION:
DIAMOND BLADE:
YES
DPU/C
SEGMENT HEIGHT:
BOTH
DRY/WET:
30° GULLET - CONICAL SEGMENTED
SEGMENT TYPE:
YES
VENTILATION: CORE PROTECTION:
DIAMOND BLADE:
YES
DU/C
SEGMENT HEIGHT:
12MM
SEGMENTED KEY HOLE GULLET
SEGMENT TYPE:
NO
VENTILATION: CORE PROTECTION:
DIAMOND BLADE:
• Clay products • Heavily reinforced concrete • Bricks • Concrete kerbs / Beams / Lintels & Flags • Facing bricks • General purpose
8MM/10MM BOTH
SEGMENTED KEY HOLE GULLET
SEGMENT TYPE:
NO
VENTILATION:
230MM ONLY
CORE PROTECTION:
YES
DIAMOND BLADE:
UNIVERSAL CONCRETE A laser welded blade with patented high density forging technology and a 30-degree in-line gullet design to reduce vibration. Fast cutting with market leading product life. (500mm has 10mm segments)
15MM
30° GULLET TURBO SEGMENTED
SEGMENT TYPE:
• Indian stone • Granite • Clay products • Class A Engineering bricks • All reinforced concrete types • Bricks • Concrete Kerbs / Beams / Lintels & Flags • Occasional use in Asphalt & small metal sections
CORE PROTECTION:
DESCRIPTION:
DIAMOND BLADE:
YES
VENTILATION:
UNIVERSAL CONCRETE A cutting blade with key hole gullet design. Good speed of cut and life.
NO
15MM
30° GULLET TURBO SEGMENTED
SEGMENT TYPE:
CONSTRUCTION MATERIALS A laser welded blade with a 30-degree gullet design. Fast cutting with long life.
YES
VENTILATION: CORE PROTECTION:
APPLICATIONS:
• Hard bricks • Clay products • All reinforced concrete types • House bricks • Abrasive materials • Concrete Kerbs / Beams / Lintels & Flags. • Occasional use in asphalt.
CONSTRUCTION MATERIALS A cutting blade with a 30-degree gullet design. Good speed of cut and life.
BOTH
DRY/WET:
• Hard bricks • Lightly reinforced concrete • Concrete Kerbs / Beams / Lintels & Flags • Facing bricks • General purpose
DUSCM has the lowest vibration levels ever recorded at OPERC
DESCRIPTION:
DCM
SEGMENT HEIGHT:
APPLICATIONS:
• Indian stone • Granite • Clay products • Class A Engineering bricks • All reinforced concrete types • Bricks • Concrete Kerbs / Beams / Lintels & Flags.
BOTH
DRY/WET:
APPLICATIONS:
APPLICATIONS:
DESCRIPTION:
DPCM
SEGMENT HEIGHT:
CONSTRUCTION MATERIALS A laser welded blade with patented high density forging technology and a 30-degree in-line gullet design to reduce vibration. A worlds first. Incredibly fast cutting with market leading product life.
NO
APPLICATIONS:
• Facing bricks • All reinforced concrete types • House bricks • Abrasive materials • Concrete Kerbs / Beams / Lintels & Flags. • Occasional use in asphalt.
BUILDING MATERIALS A cutting blade with key hole gullet design. Good speed of cut and life. 300DSBM-10 features a 10mm segment height. APPLICATIONS:
• Hard bricks • Lightly reinforced concrete • Concrete Kerbs / Beams / Lintels & Flags • Facing bricks • General purpose
NO
DPU/C
DU/C
DSBM
(4½”) 115 x 22.2
DIMENSIONS
£32.37
£10.79
£7.02
(5”) 125 x 22.2
£35.60
£11.87
£8.10
(9”) 230 x 22.2
£70.13
£24.81
£17.81
£124.07
£53.94
£34.52
(12”) 300 x 20.0
DUU/C
£185.57
(12”) 300 x 20.0 (DSBM-10)
BRAND
BRAND
CORE PROTECTION:
VENTILATION: YES,
DESCRIPTION:
DESCRIPTION:
DRY/WET:
BOTH
SEGMENT TYPE:
NO
DSBM
SEGMENT HEIGHT:
17MM
30° GULLET SHOXX CONICAL SEGMENTED
APPLICATIONS:
BOTH
DRY/WET:
DRY/WET:
DESCRIPTION:
13MM
DUSCM SHOXX
SEGMENT HEIGHT:
- CONICAL SEGMENTED • Class A Engineering bricks
VENTILATION:
13
£43.16
(14”) 350 x 20.0
£237.35
£167.23
DIMENSIONS
(14”) 350 x 25.4
£237.35
£167.23
(4½”) 115 x 22.2
(16”) 400 x 25.4 / 20.0
£329.06
£224.41
(9”) 230 x 22.2
£118.16
£70.13
£43.16
(18”) 450 x 25.4
£447.73
£267.56
(12”) 300 x 20.0
£210.38
£131.62
£75.52
£323.66
(14”) 350 x 20.0
£258.93
£174.78
(14”) 350 x 25.4
£258.93
(20”) 500 x 25.4 (24”) 600 x 25.4
£1041.11
ORDER LINE: 01909 552470
£70.13
DUSCM
DPCM
ORDER LINE: 01909 552470
DCM £19.42
DIAMOND BLADES
DIAMOND BLADES
ASPHALT & ABRASIVE MATERIALS 14 DIAMOND BLADE:
DUA
SEGMENT HEIGHT:
MULTIPLE APPLICATIONS - CONSTRUCTION
DESCRIPTION:
13MM BOTH
DRY/WET:
DIAMOND BLADE:
ASPHALT A laser welded blade with patented high density forging technology. Conical segment design with 3x deep draft segments to prevent under-cutting. Very long life.
SEGMENT HEIGHT:
WIDE GULLET APPLICATIONS: 3 DEEP DRAFT SEGMENTS • Soft concrete paviors • Abrasive blocks YES
CORE PROTECTION:
DIAMOND BLADE:
SEGMENT HEIGHT:
BOTH
DRY/WET:
WIDE GULLET 3 DEEP DRAFT SEGMENTS
SEGMENT TYPE:
YES
VENTILATION: CORE PROTECTION:
DIAMOND BLADE:
• Cement screed • Grit stone • Asphalt
SEGMENT HEIGHT:
BOTH
DRY/WET:
DIAMOND BLADE:
ASPHALT A laser welded blade with patented high density forging technology. Conical segment design with 3x deep draft segments to prevent under-cutting. Long life.
APPLICATIONS:
10MM
CONTINUOUS TURBO RIM
YES
VENTILATION: CORE PROTECTION:
DIAMOND BLADE:
ASPHALT A laser welded blade with inclined wedge segment design to prevent under-cutting. Good life.
NO
DCM-T
SEGMENT HEIGHT:
10MM BOTH
• Cement screed • Grit stone • Asphalt
CONTINUOUS TURBO RIM YES
VENTILATION:
YES
CORE PROTECTION:
• Indian stone • Granite • Class A Engineering bricks • Clay products • All reinforced concrete types • Ferrous metal sections up to 10mm gauge • Steel & Iron
CONSTRUCTION MATERIALS & METAL A turbo rim blade with special cooling holes and a reinforced flange centre for increased stability. Fast cutting with long life. APPLICATIONS:
• Indian stone • Granite • House Bricks • Class A Engineering bricks • Clay products • All reinforced concrete types • Ferrous metal sections up to 5mm gauge • Concrete, kerbs / beams / lintels & flags • Occasional use in asphalt & abrasive materials
DESCRIPTION:
DRY/WET: SEGMENT TYPE:
APPLICATIONS:
DESCRIPTION:
BOTH
SEGMENT TYPE:
• Soft concrete paviors • Abrasive blocks • Cement screed • Grit stone • Asphalt
BRAND
DIMENSIONS DIMENSIONS
DPCM-T
METAL & STONE A specially designed laser welded blade for metal and very hard stone applications. Incredibly fast cutting with good life.
NO
CONSTRUCTION MATERIALS & METAL A turbo rim blade with special cooling holes and a reinforced flange centre for increased stability. Good cutting speed and life. APPLICATIONS:
• Indian stone • Granite • House Bricks • Class A Engineering bricks • Clay products • All reinforced concrete types • Ferrous metal sections up to 5mm gauge • Concrete, kerbs / beams / lintels & flags
BRAND
CORE PROTECTION:
NO
DRY/WET:
WIDE GULLET APPLICATIONS: INCLINED WEDGE SEGMENT • Soft concrete paviors • Abrasive blocks NO
SEGMENT HEIGHT:
SEGMENT TYPE:
VENTILATION:
YES
CORE PROTECTION:
DESCRIPTION:
10MM
BOTH
VENTILATION:
YES - DOUBLE
DA
7MM
SEGMENTED NARROW KEYHOLE GULLET
DESCRIPTION:
13MM
SEGMENT TYPE:
YES - DOUBLE
DPA
DESCRIPTION:
DRY/WET:
SEGMENT TYPE:
VENTILATION:
DUM+S
DUA
DPA
DUM+S
DA
(4½”) 115 x 22.2
DPCM-T
DCM-T
£32.37
£19.42
(12”) 300 x 20.0
£185.57
£124.07
£75.52
(5”) 125 x 22.2
£35.60
(14”) 350 x 25.4
£237.35
£167.23
£91.70
(9”) 230 x 22.2
£105.73
£70.13
£43.16
(18”) 450 x 25.4
£447.73
£267.56
(12”) 300 x 20.0
£185.57
£131.62
£75.52
(24”) 600 x 25.4
£1041.11
(14”) 350 x 20.0
£237.35
£174.78
ORDER LINE: 01909 552470
15
ORDER LINE: 01909 552470
DIAMOND BLADES
MULTIPLE APPLICATIONS - CIVIL ENGINEERING 16 DIAMOND BLADE:
DESCRIPTION:
DUA/C
SEGMENT HEIGHT:
13MM BOTH
DRY/WET:
SEGMENT TYPE: KEYHOLE GULLET
4 DEEP DRAFT SEGMENTS YES
VENTILATION:
YES - DOUBLE
CORE PROTECTION:
DIAMOND BLADE:
DPA/C
SEGMENT HEIGHT:
13MM BOTH
WIDE GULLET 3 DEEP DRAFT SEGMENTS
SEGMENT TYPE:
YES
VENTILATION:
DIAMOND BLADE:
YES - DOUBLE
DA/C
SEGMENT HEIGHT:
• Indian stone • Class A Engineering bricks • Clay products • All reinforced concrete types • Ferrous metal sections up to 5mm gauge • Steel & Iron • Hard bricks • House bricks • Abrasive materials • Asphalt • Concrete kerbs / beams / lintels and flags.
CONCRETE & ASPHALT A laser welded blade with patented high density forging technology. Wide gullet design with conical segments. Fast cutting with a long life. APPLICATIONS:
• Indian stone • Class A Engineering bricks • Clay products • All reinforced concrete types • Granite • Hard bricks • House bricks • Abrasive materials • Asphalt • Concrete kerbs / beams / lintels and flags.
DESCRIPTION:
10MM BOTH
DRY/WET: SEGMENT TYPE:
APPLICATIONS:
DESCRIPTION:
DRY/WET:
CORE PROTECTION:
CONCRETE/ASPHALT/METAL/ HARD MATERIALS A laser welded blade with patented high density forging technology. Narrow gullet design with conical segments. Very fast cutting with very long life.
SEGMENTED WIDE GULLET NO
VENTILATION: CORE PROTECTION:
YES
CONCRETE & ASPHALT A laser welded blade with a wide gullet design and 3 special inclined segments for undercutting protection. Good speed of cut and life. APPLICATIONS:
• Class B Engineering bricks • Clay products • All reinforced concrete types • House bricks • Abrasive materials • Asphalt • Hard bricks • Concrete kerbs / beams / lintels and flags.
reduced noise blades BRAND
SMOOTHER / STRONGER / QUIETER THE SILENT RANGE
DIMENSIONS (12”) 300 x 20.0
DUA/C
DPA/C
DA/C
£210.38
£131.62
£86.31
(13”) 350 x 20.0
£174.78
(14”) 350 x 25.4
£258.93
£174.78
(16”) 400 x 20.0
£356.03
£256.87
(18”) 450 x 25.4
£463.92
£280.51
ORDER LINE: 01909 552470
£113.28
SILENT DIAMOND BLADES
CONSTRUCTION MATERIALS & CIVIL ENGINEERING 18 DIAMOND BLADE:
DESCRIPTION:
DUA/C-SILENT
SEGMENT HEIGHT:
13MM BOTH
DRY/WET:
SEGMENT TYPE: KEYHOLE GULLET
4 DEEP DRAFT SEGMENTS NO
VENTILATION:
CORE PROTECTION:
DIAMOND BLADE:
YES - SILENT
DUCM-SILENT
SEGMENT HEIGHT:
BOTH
30° GULLET CONICAL SEGMENTED
SEGMENT TYPE:
NO
VENTILATION: CORE PROTECTION:
APPLICATIONS:
• Indian stone • Class A Engineering bricks • Clay products • All reinforced concrete types • Ferrous metal sections up to 5mm gauge • Hard bricks • House bricks • Abrasive materials • Asphalt • Concrete kerbs / beams / lintels and flags.
DESCRIPTION:
17MM
DRY/WET:
CONCRETE/ASPHALT/METAL/ HARD MATERIALS A laser welded blade with narrow gullet design and conical segments. Very fast cutting with very long life. Multi-layer steel core for noise and vibration reduction.
YES - SILENT
CONSTRUCTION MATERIALS A laser welded blade with 30-degree gullet design and conical segments. Very fast cutting with very long life. Multilayer steel core for noise and vibration reduction. APPLICATIONS:
• Indian stone • Clay products • Hard bricks • All reinforced concrete types • House bricks • Abrasive materials • Concrete kerbs / beams / lintels and flags. • Occasional use in asphalt
DURO NOISE REDUCED DIAMONDS BLADES SAFETY: DURO HAS IT COVERED
SILENT RUNNING
Both the DUA/C-SILENT & DUCM-SILENT blades have laser welded conical segments and a new high technology multi-layer steel core - which when combined offer amazing results in both vibration and noise reduction. The new conical segment reduces airflow around the blade in motion, a significant contributor to noise creation when cutting with a diamond blade. The new multi-layer steel core further takes tension and as a result, resonance from the blade in use: resulting in over 12dB(A) lower sound emission.
DUST SUPPRESSION BRAND
DUST SUPPRESSION WATER TANK BRASS HOSE CONNECTOR PUMP KIT INTERNAL/EXTERNAL HOSE KIT
DIMENSIONS
DUA/C-SILENT
(4½”) 115 x 22.20 (5”) 125 x 22.20
DUCM-SILENT £72.00 £77.00
(9”) 230 x 22.20
£115.00
(12”) 300 x 20.00
£225.00
£225.00
(14”) 350 x 25.40
£275.00
ORDER LINE: 01909 552470
DUST SUPPRESSION
TANK AND ACCESSORIES 20
DUST SUPPRESSION WATER TANK:
DP-DST-13L
DESCRIPTION:
Made from high density polyethylene, this 13 litre water tank is available complete with standard “hose lock” fittings. It features a 4m ‘kink free’ hose and a safety valve for depressurising automatically. It also has a wide funnel opening for easy filling. Solid brass connectors are available seperately to extend the life of the tank.
DUST SUPPRESSION TANK ACCESSORY:
APPLICATIONS:
Replacement pump for DP-DST-13L
Used to suppress the creation of dust from hand held saws in all working environments. Essential safety at work accessory for all users of diamond blades driven by petrol saws.
INTERNAL HOSE KIT
DESCRIPTION:
APPLICATIONS:
Replacement internal water feed and filter for DP-DST-13L
DUST SUPPRESSION TANK ACCESSORY:
Used to suppress the creation of dust from hand held saws in all working environments. Essential safety at work accessory for all users of diamond blades driven by petrol saws.
PUMP KIT
DESCRIPTION:
DUST SUPPRESSION TANK ACCESSORY:
APPLICATIONS:
Used to suppress the creation of dust from hand held saws in all working environments. Essential safety at work accessory for all users of diamond blades driven by petrol saws.
EXTERNAL KIT
DESCRIPTION:
APPLICATIONS:
Used to suppress the creation of dust from hand held saws in all working environments. Essential safety at work accessory for all users of diamond blades driven by petrol saws.
2 Stroke oils
BRAND
Replacement external hose for DP-DST-13L. (please note the hose has the nylon connector to connect to the tank included but not the hose lock fitting for the machine).
DESCRIPTION
ACCESSORIES
DP-DST-13L
DP-DST-13L - 13 LITRE CAPACITY WATER TANK
£101.41
DP-DST-13L-NS - 13 LITRE CAPACITY WATER TANK (NEUTRAL)
£101.41
DP-DST-13L - BRASS CONNECTOR
£12.95
DP-DST-13L - PUMP KIT
£41.00
DP-DST-13L - INTERNAL HOSE KIT
£21.58
DP-DST-13L - EXTERNAL HOSE KIT
£45.31
DP-DST-13L - SEAL KIT
£9.25
DP-DST-13L - REPLACEMENT PRESSURE VALVE KIT
£21.58
ORDER LINE: 01909 552470
TWO STROKE ENGINE OIL 1 SHOT / 1 LITRE / 5 LITRE
2 STROKE OILS
SEMI SYNTHETIC OIL 22
DIAMOND BLADE ACCESSORY:
2 STROKE - SEMI SYNTHETIC OIL - 1 SHOT
DESCRIPTION:
APPLICATIONS:
DURO PLUS oil is a high performance 2-stroke oil exceeding both APITC and JASO specifications. 100ml bottles come boxed in lots of 25 with full POS packaging.
DIAMOND BLADE ACCESSORY:
2-stroke engines: 100ml treats 5L of petrol. Suitable for use with Stihl, Husqvarna, Makita, Partner, Honda, Robin, McCulloch, Echo, Mitsubishi, Kawasaki, Talon and more.
2 STROKE - SEMI SYNTHETIC OIL - 1 LITRE
DESCRIPTION:
APPLICATIONS:
DURO PLUS oil is a high performance 2-stroke oil exceeding both APITC and JASO specifications.
DIAMOND BLADE ACCESSORY:
2-stroke engines: 100ml treats 5L of petrol. Suitable for use with Stihl, Husqvarna, Makita, Partner, Honda, Robin, McCulloch, Echo, Mitsubishi, Kawasaki, Talon and more.
2 STROKE - SEMI SYNTHETIC OIL - 5 LITRE
DESCRIPTION:
APPLICATIONS:
DURO PLUS oil is a high performance 2-stroke oil exceeding both APITC and JASO specifications.
2-stroke engines: 100ml treats 5L of petrol. Suitable for use with Stihl, Husqvarna, Makita, Partner, Honda, Robin, McCulloch, Echo, Mitsubishi, Kawasaki, Talon and more.
MORTAR RAKERS BRAND
DIAMOND MORTAR RAKING BLADES CARBIDE MORTAR RAKING CORES ADAPTORS
DESCRIPTION
PART NO.
LIST
BOX OF 25 100ML BOTTLES OF 2 STROKE SEMI SYNTHETIC OIL
DP-TSO-25X100ML
£47.27
1L BOTTLE OF 2 STROKE SEMI SYNTHETIC OIL
DP-TSO-1L
£12.33
5L BOTTLE OF 2 STROKE SEMI SYNTHETIC OIL
DP-TSO-5L
£45.72
ORDER LINE: 01909 552470
MORTAR RAKERS
MORTAR RAKING BLADES AND CORES 24 DIAMOND MORTAR RAKER: SEGMENT HEIGHT:
DPM
DESCRIPTION:
8MM BOTH
DRY/WET:
SEGMENTED
SEGMENT TYPE:
CORE PROTECTION:
All types of hard and abrasive mortar.
YES
DIAMOND MORTAR RAKER: SEGMENT HEIGHT:
DESCRIPTION:
DM
8MM
MORTAR A 6mm thick blade. Fast cutting with a long life.
BOTH
DRY/WET:
SEGMENTED
SEGMENT TYPE:
APPLICATIONS:
All types of hard and abrasive mortar.
NO
VENTILATION: CORE PROTECTION:
NO
DIAMOND MORTAR RAKER: SEGMENT HEIGHT:
DSM
DESCRIPTION:
8MM
MORTAR A 6mm thick blade. Good speed of cut and life.
BOTH
DRY/WET: SEGMENT TYPE:
SEGMENTED
APPLICATIONS:
All types of hard and abrasive mortar.
NO
VENTILATION: CORE PROTECTION:
SHANK STYLE:
APPLICATIONS:
NO
VENTILATION:
DIAMOND CORE:
MORTAR A 6mm thick laser welded blade with special inserts for undercutting protection. Very fast cutting with a very long tool life.
NO
DP-SDS-MRCORE SDS PLUS (adaptor)
DESCRIPTION:
MORTAR RAKING CORES Virtually dust free mortar removal. Controllable due to being used on SDS plus power tool (lower RPM to angle grinders). Irregular braze pattern carbide grit for rapid mortar removal.
ACTION:
ROTARY ONLY
HEAD TYPE:
BRAZED APPLICATIONS: CARBIDE GRIT All types of mortar and all depths of
YES
DUST EXTRACTION: BODY STYLE:
CORE
mortar. Available in 6.5mm, 8.0mm and 10.0mm diameter with drive adaptor that incorporates a vacuum nozzle.
RAILWAY MAINTENANCE BUILDING MATERIALS METALS, WOODS PLASTICS AND COMPOSITES
BRAND DIMENSIONS
MULTI USE BLADES
DPM
DM
DSM
(4½”) 115 x 6.0 x 22.2
DP-SDS-MRCORE
£110.05
£32.37
£23.74
(5”) 125 x 6.0 x 22.2
£120.83
£37.76
£25.89
6.5mm Core
£12.99
8.0mm Core
£13.72
10.0mm Core
£14.44
Core Drive Adaptor
£56.48
ORDER LINE: 01909 552470
MULTI USE BLADES
MULTIPLE MATERIALS / RESCUE / RAIL 26 MULTI USE DIAMOND BLADE: SEGMENT HEIGHT:
DPVB
DESCRIPTION:
N/A BOTH
DRY/WET: SEGMENT TYPE:
DOUBLE APPLICATIONS: SEGMENTED • Concrete • Reinforced concrete YES
VENTILATION: CORE PROTECTION:
CONSTRUCTION MATERIALS & RESCUE Double segmented, vacuum brazed diamond blade. Special vacuum process directly coats the blade with diamonds giving universal cutting properties.
NO
• Concrete with exposed aggregate • Paving • Indian stone • Quarry slabs • Granite slabs & bricks • Cast iron • Sheet metals • Non-ferrous metals • Ducting • Plastics • Glass • Fibreglass • Rubber • Wood • Carbon fibre
THESE ARE SPECIFICALLY DESIGNED MULTI USE BLADES RAILWAY MAINTENANCE - NETWORK RAIL APPROVED:
The 400DPVB DURO PLUS Multi Use blade has been specifically developed for use by railway contractors for the cutting of both sleepers and supporting ballast in a single cut. This blade has been specified by the UK’s leading railway maintenance contractors, including Network Rail.
SPECIFIED BY USAR
(URBAN SEARCH & RESCUE DEPT OF FIRE BRIGADE)
SPECIFIED BY NETWORK RAIL
BRAND
SPECIAL APPLICATIONS DIMENSIONS
DPVB
(4½”) 115 x 1.6 x 22.2
£37.76
(5”) 125 x 1.6 x 22.2
£41.00
(7”) 180 x 1.6 x 22.2
£70.13
(9”) 230 x 1.6 x 22.2
£86.31
(12”) 300 x 2.2 x 20.0
£131.62
(14”) 350 x 2.2 x 20.0
£174.78
(16”) 400 X 2.2 x 20.0
£274.86
ORDER LINE: 01909 552470
DIAMOND RING SAW BLADES DIAMOND BRICK CUTTING BLADES DIAMOND LOOPING BLADES
SPECIAL APPLICATIONS
RING / LOOPING / BRICK BLADES 28 RING SAW BLADE:
DESCRIPTION:
DU-RING
SEGMENT HEIGHT:
8MM BOTH
DRY/WET:
SEGMENTED WIDE GULLET
SEGMENT TYPE:
N/A
VENTILATION: CORE PROTECTION:
LOOPING BLADE:
APPLICATIONS:
Universal applications in concrete and building materials.
N/A
DESCRIPTION:
DUU/C-LOOP
SEGMENT HEIGHT:
UNIVERSAL CONCRETE & BUILDING MATERIALS 350mm laser welded ring for use on Partner / Husqvarna K3600. Drive wheel included.
8MM WET
DRY/WET:
ASPHALT & CONCRETE A laser welded blade with a high performance bond system and available in 3 widths (8.0, 10.0 and 12.0mm). Top performance.
SEGMENTED APPLICATIONS: NARROW GULLET All types of concrete, asphalt and asphalt
SEGMENT TYPE:
N/A
VENTILATION: CORE PROTECTION:
N/A
BRICK CUTTING BLADE: SEGMENT HEIGHT:
over concrete.
DESCRIPTION:
DUHB
10MM WET
DRY/WET:
HARD BRICK Blade is laser welded with a narrow gullet design to prevent surface damage to the brick. Top performance with a long life time.
SEGMENTED APPLICATIONS: NARROW GULLET Hard cast and fired bricks of all types
SEGMENT TYPE:
N/A
VENTILATION: CORE PROTECTION:
N/A
BRICK CUTTING BLADE: SEGMENT HEIGHT:
including clay and class A engineering bricks.
DPHB
DESCRIPTION:
10MM WET
DRY/WET:
HARD BRICK Blade is laser welded with a narrow gullet design to prevent surface damage to the brick.
SEGMENTED APPLICATIONS: NARROW GULLET Hard cast and fired bricks of all types
SEGMENT TYPE:
N/A
VENTILATION: CORE PROTECTION:
including clay and class A engineering bricks.
N/A
BRAND
DIAMOND CORE DRILLS
DIMENSIONS
DU-RING
(14”) 350
£275.11
DUU/C-LOOP
DUHB
DPHB
(14”) 350 x 25.4
£269.72
£174.78
(18”) 450 x 25.4
£377.61
£280.51
(14”) 350 x 8.0 x 25.4
£512.47
(14”) 350 x 10.0 x 25.4
£550.23
(14”) 350 x 12.0 x 25.4
£631.14
ORDER LINE: 01909 552470
DRY DIAMOND CORES WET DIAMOND CORES ACCESSORIES
DIAMOND CORE DRILLS
DIAMOND CORE DRILLS
DRY DIAMOND CORE DRILLS 30 DIAMOND CORE:
DPDC
SEGMENT HEIGHT:
DESCRIPTION:
13MM DRY
DRY/WET:
SEGMENTED TURBO/ROOF TOP
SEGMENT TYPE:
VENTILATION:
YES
YES, SPIRAL
CORE PROTECTION:
DIAMOND CORE:
DDC
SEGMENT HEIGHT:
10MM DRY
SEGMENTED TURBO/ROOF TOP
SEGMENT TYPE:
VENTILATION:
YES
YES, SPIRAL
CORE PROTECTION:
DIAMOND CORE:
DSDC
SEGMENT HEIGHT:
8MM DRY SEGMENTED
VENTILATION:
YES
NO
CORE PROTECTION:
13MM DRY
DRY/WET:
APPLICATIONS:
SEGMENTED TURBO/ROOF TOP
SEGMENT TYPE:
Hard bricks, blocks and concrete even with light reinforcement (5mm bar). Medium hard brick and block.
VENTILATION:
YES
YES, SPIRAL
CORE PROTECTION:
DIAMOND CORE:
BRICK & BLOCK A range of Standard-Line dry core drills for use on 800watt and above machines without impact. Slots in the side of the barrel clear debris in use.
10MM DRY
DRY/WET:
APPLICATIONS:
KITS Available as a 5 piece in PLUS specification for professional users seeking optimum performance. APPLICATIONS:
Hard bricks, blocks and concrete even with light reinforcement (5mm bar). Medium hard brick and block. In addition - the kit includes: Chuck adaptor, SDS Adaptor, Universal Extension, Guide Rod, Drift Key and a 350mm long Masonry Bit.
DESCRIPTION:
DDC-KIT
SEGMENT HEIGHT:
31 DESCRIPTION:
DPDC-KIT
SEGMENT HEIGHT:
KITS Available as a 5 piece in STANDARD specification. APPLICATIONS:
Medium hard brick and block.
SEGMENTED TURBO/ROOF TOP
SEGMENT TYPE:
Medium hard brick and block.
VENTILATION:
YES
YES, SPIRAL
CORE PROTECTION:
DESCRIPTION:
DRY/WET: SEGMENT TYPE:
DIAMOND CORE:
BRICK/BLOCK/CONCRETE A range of Pro-Line, laser welded dry core drills for use on 800watt and above machines without impact. Slots in the side of the barrel clear debris in use.
DESCRIPTION:
DRY/WET:
DRY DIAMOND CORE DRILL KITS
DIAMOND CORE:
BRICK & BLOCK An Entry-Level range of dry core drills for use on 800watt and above machines without impact. Slots in the side of the barrel clear debris in use.
DSDC-KIT
SEGMENT HEIGHT:
DESCRIPTION:
8MM DRY
DRY/WET:
APPLICATIONS:
SEGMENT TYPE:
Medium hard brick and block.
SEGMENTED
VENTILATION:
YES
NO
CORE PROTECTION:
In addition - the kit includes: Chuck adaptor, SDS Adaptor, Universal Extension, Guide Rod, Drift Key and a 350mm long Masonry Bit.
KITS Available as a 3 piece or 5 piece variant in BASE specification - the kits are perfect for the tradesmen who use dry drills regularly. APPLICATIONS:
Medium hard brick and block. In addition - the kit includes: Chuck adaptor, SDS Adaptor, Universal Extension, Guide Rod, Drift Key and a 350mm long Masonry Bit.
DIMENSIONS
DPDC
22 x 300 x SW12 (HEX)
£73.36
DDC
DSDC
28 x 300 x SW12 (HEX)
£73.36
£39.92
£26.97
32 x 150 x R½”
£74.44
38 x 150 x R½”
£75.52
£42.08
£26.97
42 x 150 x R½”
£76.60
£43.16
£30.21
48 x 150 x R½”
£84.15
52 x 150 x R½”
£86.31
£46.39
£37.76
65 x 150 x R½”
£94.94
£51.79
£41.00
78 x 150 x R½”
£101.41
£57.18
£45.31
92 x 150 x R½”
£110.05
102 x 150 x R½”
£116.52
107 x 150 x R½”
£127.31
£71.21
£58.26
117 x 150 x R½”
£133.78
£74.44
£60.42
127 x 150 x R½”
£135.94
£83.07
£64.73
152 x 150 x R½”
£142.41
£90.63
£71.21
158 x 150 x R½”
£160.75
162 x 150 x R½”
£178.01
£106.81
£92.78
175 x 150 x R½”
£185.57
ORDER LINE: 01909 552470
BRAND
BRAND
BARREL LENGTHS Solid, shorter and longer length barrel cores are available upon request.
DIMENSIONS
DPDC
DDC
DSDC
3 Pc Kit (42, 52 & 117)
£137.02
5 Pc Kit (42, 52, 65, 117 & 127)
£219.01
£334.45
ORDER LINE: 01909 552470
£256.88
DIAMOND CORE DRILLS
DIAMOND CORE DRILLS
DRY CORE DRILL ACCESSORIES 32 DIAMOND CORE ACCESSORIES:
WET DIAMOND CORES
DRY
DIAMOND CORE:
DESCRIPTION: DURO PLUS
A range of quality accessories made from premium grade tool steels for maximum strength and durability. Made in the U.K. DESCRIPTION: DURO STANDARD
A range of good quality dry core accessories made from tool grade steels.
APPLICATIONS:
33
DPWC
SEGMENT HEIGHT:
Dry core drill adaptors that allow the use of core drills on a variety of different machine types and allow you to extend the reach of the core drills.
DESCRIPTION:
9MM WET
DRY/WET:
CROWN UP TO 32MM THEN SEGMENTED
SEGMENT TYPE:
APPLICATIONS:
Adaptors that allow the use of core drills on a variety of different machine types and allow you to extend the reach of the core drills.
VENTILATION:
WATER COOLED
N/A
CORE PROTECTION:
CONCRETE A range of professional, wet diamond cores for high speed drilling and long useful life times. APPLICATIONS:
Reinforced and non-reinforced concrete, plus hard brick and block. Shorter and longer length wet cores are available in addition to the list below.
DRY ACCESSORIES DP-CA
SA
DP-SA
GR
A-TAPER EXT3 PILOT
DP-EXT3
DD100AM
DD130AM
BRAND
BRAND
CA
DESCRIPTION - DRY ACCESSORIES
REFERENCE
DRY
DRY
3 JAW ADAPTOR PACK CAP £20.50 (ADAPTOR, GUIDE ROD, DRIFT KEY) DURO PLUS 3 JAW ADAPTOR PACK DP-CAP £25.89 (ADAPTOR, GUIDE ROD, DRIFT KEY) 3 JAW ADAPTOR CA £18.34 DURO PLUS 3 JAW ADAPTOR DP-CA £21.58 SDS ADAPTOR PACK SAP £24.81 (ADAPTOR, GUIDE ROD, DRIFT KEY) DURO PLUS SDS ADAPTOR PACK DP-SAP £30.21 (ADAPTOR, GUIDE ROD, DRIFT KEY) SDS ADAPTOR SA £22.66 DURO PLUS SDS ADAPTOR DP-SA £26.97 UNIVERSAL GUIDE ROD GR £6.47 DURO PLUS UNIVERSAL GUIDE ROD DP-GR £9.71 DRIFT KEY DK £4.32 DURO PLUS DRIFT KEY DP-DK £9.71 200MM EXTENSION ½” BSP (F) - ½” BSP (M) EXT3 £30.21 WITH ‘A’ TAPER INTERNAL DURO PLUS 200MM EXTENSION ½” BSP (F) - ½” BSP (M) DP-EXT3 £36.68 WITH ‘A’ TAPER INTERNAL DURO PLUS 250MM EXTENSION EXT3-M £41.10 ½” BSP (F) - ½” BSP (M) WITH ‘A’ TAPER INTERNAL 3 JAW 13 X 400MM MASONRY DRILL MD £14.03 SDS 13 X 450MM MASONRY DRILL SMD £12.95 ½” BSP (M) DRY CORE ADAPTOR FOR HILTI DD100 DD100AM £75.52 HILTI DD130 (6 SPLINE) TO ½” BSP (M) DD130AM £75.52 WITH ‘A’ TAPER INTERNAL A-TAPER PILOT DRILL - 10 X 225MM 10X225-ATAPER-P £12.06 A-TAPER PILOT DRILL - 13 X 250MM 13X250-ATAPER-P £9.76
ORDER LINE: 01909 552470
DIMENSIONS
DPWC - CROWN
10 x 200 x ½” BSP (M)
£62.57
12 x 200 x ½” BSP (M)
£64.73
14 x 320 x ½” BSP (M)
£65.81
16 x 320 x ½” BSP (M)
£67.97
18 x 320 x ½” BSP (M)
£69.05
20 x 320 x ½” BSP (M)
£71.21
22 x 320 x ½” BSP (M)
£75.52
24 x 320 x ½” BSP (M)
£77.68
25 x 320 x ½” BSP (M)
£78.76
28 x 320 x ½” BSP (M)
£79.84
30 x 320 x ½” BSP (M)
£81.99
32 x 320 x ½” BSP (M)
£85.23
DPWC - SEGMENTED
35 x 320 x ½” BSP (M)
£88.47
38 x 320 x ½” BSP (M)
£91.70
40 x 320 x ½” BSP (M)
£103.57
42 x 320 x ½” BSP (M)
£104.65
47 x 320 x ½” BSP (M)
£115.44
52 x 450 x ½” BSP (M)
£117.60
52 x 450 x 11/4” UNC (F)
£119.76
62 x 450 x 11/4” UNC (F)
£132.70
67 x 450 x 11/4” UNC (F)
£141.33
77 x 450 x 11/4” UNC (F)
£159.67
82 x 450 x 11/4” UNC (F)
£169.38
92 x 450 x 11/4” UNC (F)
£189.88
102 x 450 x 11/4” UNC (F)
£199.59
107 x 450 x 11/4” UNC (F)
£211.46
112 x 450 x 11/4” UNC (F)
£222.25
122 x 450 x 11/4” UNC (F)
£240.59
127 x 450 x 11/4” UNC (F)
£255.69
132 x 450 x 11/4” UNC (F)
£265.40
142 x 450 x 11/4” UNC (F)
£303.16
152 x 450 x 11/4” UNC (F)
£318.27
162 x 450 x 11/4” UNC (F)
£337.69
172 x 450 x 11/4” UNC (F)
£375.45
182 x 450 x 11/4” UNC (F)
£397.03
202 x 500 x 11/4” UNC (F)
£412.13
212 x 500 x 11/4” UNC (F)
£505.99
225 x 500 x 11/4” UNC (F)
£515.70
250 x 500 x 11/4” UNC (F)
£557.78
300 x 500 x 11/4” UNC (F)
£710.98
350 x 500 x 11/4” UNC (F)
£809.16
400 x 500 x 11/4” UNC (F)
£966.67
450 x 500 x 11/4” UNC (F)
£1013.06
500 x 500 x 11/4” UNC (F)
£1198.63
ORDER LINE: 01909 552470
DIAMOND CORE DRILLS WET CORE DRILL ACCESSORIES 34 DIAMOND CORE ACCESSORIES:
WET
DESCRIPTION: ACCESSORIES
A range of quality accessories made from premium grade tool steels for maximum strength and durability. Made in the U.K.
APPLICATIONS:
Wet core drill adaptors that allow the use of core drills on a variety of different machine types and allow you to extend the reach of the core drills.
WET ACCESSORIES AD1
AD2
AD3
AD4
EXT1
EXT2
DD130
DD160
DD200
CUT N GRIND diamond grinders
BRAND
CUTTING / FLUSH CUTTING / GRINDING EDGE GRINDING / SHAPING
DESCRIPTION - WET ACCESSORIES
REFERENCE
WET
½” BSP (M) - 1¼” UNC (M) ADAPTOR
AD1
£28.05
½” BSP (F) - 1¼” UNC (F) ADAPTOR
AD2
£28.05
½” BSP (M) - ½” BSP (M) ADAPTOR
AD3
£28.05
½” BSP (F) - ½” BSP (F) ADAPTOR
AD4
£28.05
300MM - 1¼” UNC (F) - 1¼” UNC (M) EXTENSION
EXT1
£56.10
300MM - ½” BSP (F) - ½” BSP (M) EXTENSION HILTI DD100/120/130 - ½” BSP (F) & 1¼” UNC (M)
EXT2
£56.10
DD130
£75.52
HILTI DD160 - 1¼” UNC / ½” BSP FEMALE
DD160
£178.01
HILTI DD200 - ½ BSP (F) & 1¼” UNC (M)
DD200
£178.01
ORDER LINE: 01909 552470
DOUBLE ROW CUP GRINDERS / TURBO CUP GRINDERS FLOOR GRINDING PLATES
CUT N GRIND
COMBINATION DIAMOND BLADE/GRINDER 36 DIAMOND BLADE:
DPCNG
BLADE SEGMENT HEIGHT: GRINDER SEGMENT HEIGHT:
DIAMOND GRINDERS
CUP GRINDERS 37
DESCRIPTION:
10MM 25MM
BLADE SEGMENT TYPE: CONTINUOUS RIM
CUP GRINDER:
MULTI PURPOSE CUTTING AND GRINDING A dry cutting combination blade and grinder specifically designed for use on angle grinders. For cutting, flush cutting, grinding, edge grinding and shaping.
DPTCG
SEGMENT HEIGHT:
DESCRIPTION:
5MM BOTH
DRY/WET:
APPLICATIONS:
TURBO SEGMENTED
SEGMENT TYPE:
Concrete, brick, stone, tiles and general building materials.
GRINDER SEGMENT TYPE: TURBO CONTINUOUS RIM
VENTILATION:
YES
NO
CORE PROTECTION:
CUP GRINDER:
DPCG
SEGMENT HEIGHT:
5MM
DOUBLE ROW SEGMENTED
VENTILATION:
YES
NO
DCG
SEGMENT HEIGHT:
5MM
DOUBLE ROW SEGMENTED
VENTILATION:
YES
NO
DSCG
SEGMENT HEIGHT:
5MM
CONCRETE & STONE A Standard-Line double row cup grinder.
APPLICATIONS:
Good life and stock removal in concrete and medium hard stone.
CONCRETE & STONE An entry level double row cup grinder.
BOTH DOUBLE ROW SEGMENTED
VENTILATION:
YES
NO
APPLICATIONS:
Good life and stock removal in concrete and medium hard stone.
BRAND
BRAND
CORE PROTECTION:
Long life and good stock removal in concrete and medium hard stone.
DESCRIPTION:
DRY/WET: SEGMENT TYPE:
APPLICATIONS:
BOTH
SEGMENT TYPE:
CUP GRINDER:
CONCRETE & STONE A Pro-Line double row cup grinder.
DESCRIPTION:
DRY/WET:
CORE PROTECTION:
High stock removal and good life in concrete and medium hard stones.
BOTH
SEGMENT TYPE:
CUP GRINDER:
APPLICATIONS:
DESCRIPTION:
DRY/WET:
CORE PROTECTION:
CONCRETE & STONE A Pro-Line turbo style cup grinder.
DIMENSIONS
DPTCG
DPCG
DCG
(4”) 100 x 15/22.2
£91.70
£91.70
£86.31
DIMENSIONS
DPCNG
(4½”) 115 x 15/22.2
£112.20
£112.20
(4½”) 115 x 22.2
£43.16
(5”) 125 x 22.2
£128.39
£128.39
(5”) 125 x 22.2
£47.27
(6”) 150 x 22.2
£161.83
£161.83
(9”) 230 x 22.2
£82.20
(7”) 180 x 22.2
£200.67
£200.67
ORDER LINE: 01909 552470
ORDER LINE: 01909 552470
£102.49
£134.86
DSCG
£64.00
DIAMOND GRINDERS
FLOOR GRINDERS 38
FLOOR GRINDER:
FGP10/16/20
SEGMENT HEIGHT: DRY/WET: SEGMENT TYPE:
DESCRIPTION:
10MM BOTH SEGMENTED
VENTILATION:
NO
NO
CORE PROTECTION:
CONCRETE FLOORS A selection of 10, 16 and 20 segmented floor grinding plates for use on PRM type floor grinding machines, with multi holes in plate for most machine types. APPLICATIONS:
Concrete.
CONCAVE DIAMOND BLADES BRAND
CURVED CUTTING OF TILES & STONE
DIMENSIONS
FGP10/16/20
(10”) 250 - 10 Segments
£307.48
(10”) 250 - 16 Segments
£345.24
(10”) 250 - 20 Segments
£372.21
ORDER LINE: 01909 552470
CONCAVE DIAMOND BLADES
CURVED CUTTING 40
CONCAVE DIAMOND BLADE: SEGMENT HEIGHT:
10MM DRY
DRY/WET: SEGMENT TYPE:
DESCRIPTION:
HARD CONCRETE, TILE & STONE Blade is directly sintered with a high performance bond system and available in 3 diameters (115, 125 & 230mm).
CONTINUOUS APPLICATIONS: TURBO RIM All types of concrete, tile and hard stones. NO
VENTILATION: CORE PROTECTION:
DU-CURVEX
For cutting curves. The smaller the diameter of blade selected, the smaller the radius of curve possible.
NO
CARBIDE RIPPA BLADES BRAND
WOOD, TREE ROOTS, RUBBER, PLASTICS & MORE
DIMENSIONS
DU-CURVEX
(4½”) 115 x 2.2 x 22.2
£41.00
(5”) 125 x 2.2 x 22.2
£43.16
(9”) 230 x 2.2 x 22.2
£97.10
ORDER LINE: 01909 552470
CARBIDE RIPPA BLADES MULTI-USE 42
CARBIDE RIPPA BLADE: SEGMENT HEIGHT:
DU-RB
DESCRIPTION:
N/A BOTH
DRY/WET: SEGMENT TYPE:
CARBIDE CLUSTERS N/A
VENTILATION: CORE PROTECTION:
REDUCED NOISE
MULTI-USE A unique welded tip carbide saw blade for use on petrol driven saws and angle grinders with a reduced noise and vibration centre. Blade is bi-directional. APPLICATIONS:
• Tree roots, wood boards and planks • Nails • Fence panels • Thin sheet metal • Screws • Flashing • Decking • Groundwork • Rubber • Plastic • Abrasive blocks • Flat roofs and tar • Anything a diamond blade can’t cut!
THESE ARE THE ORIGINAL RIPPA BLADES - NOT TO BE CONFUSED WITH INFERIOR COPIES SAFETY STANDARDS:
DURO ULTRA RIPPA blades have been tested in-house and approved for sale in the U.K by B.S.I and in line with the GPSD (General Product Safety Directive). They are manufactured to the same stringent standards as all our diamond tools - in line with EN13236 but cannot be marked as such as they are not classified as a super-abrasive (diamond tool). A copy of our internal documentation is available upon request.
anything a diamond blade can’t do!
wood / metal / plastics rubber / TREE ROOTS / rescue & MUCH MORE...
SABRE SAW BLADE
BRAND
MULTI PURPOSE SAW BLADE FOR ANGLE GRINDERS
DIMENSIONS
DU-RB
(5”) 125 x 22.2
£107.89
(9”) 230 x 22.2
£194.20
(12”) 300 x 20.0
£258.93
(14”) 350 x 20.0
£307.48
(14”) 350 x 25.4
£307.48
ORDER LINE: 01909 552470
SABRE SAW BLADES MULTI-USE 44
SABRE SAW BLADE:
ANGLE GRINDERS
TOOL:
4 OFF-SET
CUTTING TEETH: CUTTING TEETH TYPE:
DRY/WET: RESHARPEN:
the dedicated angle grinder saw blade
DESCRIPTION: MULTI-USE
DPWB
PRECISION GROUND
DRY CUTTING
YES
A unique, precision profiled saw blade designed exclusively for use on angle grinders. Extremely fast and free cutting, the SABRE Saw blade enables smooth, clean cuts with its unique off set precision tooth formation. It has excellent tool life. APPLICATIONS:
• Wood boards and planks • Fence panels • Decking • Plastics • Tubing • Corrugated plastic roofing • Plaster board • MDF • Plywood • Fibreglass • Polyethelene • PVC and much more...
wood / plastics / pvc fibreglass & more
CIRCULAR SAW BLADES BRAND
WOODWORKING NON FERROUS METAL & OTHER MATERIALS
DIMENSIONS
DPWB
(4½”) 115 x 22.2
£19.96
(5”) 125 x 22.2
£21.04
(9”) 230 x 22.2
£38.84
ORDER LINE: 01909 552470
CIRCULAR SAW BLADES
CIRCULAR SAW BLADES
CARBIDE TIPPED FOR WOOD 46 CIRCULAR SAW: BORE:
WOODWORKING
REAMED FOR PRECISE FIT
CARBIDE TIPS: BRAZING:
TC3 CARBIDE
DESCRIPTION:
CIRCULAR SAW:
WOODWORKING A range of tungsten carbide tipped circular saw blades designed for a professional finish. Body hardened and tempered to retain trueness. High grade alloy steel is precision ground to maintain flatness.
BORE:
REAMED FOR PRECISE FIT
BRAZING:
stone fibre board and particle board and
TC3 CARBIDE
SILVER FOR SECURE BOND OF TIP
CONFIGURE: ALTERNATE TOP
Do not use on metal. Each saw blade comes with free bushes.
STEEL PLATE:
a b c
DESCRIPTION:
WOODWORKING WITH ANTI-KICKBACK A range of tungsten carbide tipped circular saw blades designed for a professional finish. Body hardened and tempered to retain trueness. High grade alloy steel is precision ground to maintain flatness. Anti-kickback configuration helps protect the user on hand held saws.
BEVEL Soft wood, hard wood, plasterboard,
HIGH GRADE ALLOY
stone fibre board and particle board and much more. Do not use on metal. Each saw blade comes with free bushes.
ANTI-KICKBACK TECHNOLOGY Anti-kickback technology stops the blade from being grabbed by the workpiece - causing the workpiece to be thrown back toward the user. Especially dangerous on hand held machinery where the user is more open to kick-back debris. Highlighted here as (a), (b) & (c).
TEETH QTY
BODY / TIP
PART NO.
FREE BUSHES
LIST PRICE
130 x 20.00
20
1.4mm / 2.2mm
130x20-DCS-W20
12.75-16
£13.21
140 x 20.00
24
1.4mm / 2.2mm
140x20-DCS-W24
12.75-16
£14.03
175 x 20.00
40
1.4mm / 2.2mm
175x20-DCS-W40
12.75-16
£21.04
180 x 30.00
24
1.4mm / 2.2mm
180x30-DCS-W24
16-20-25
£17.26
180 x 30.00
40
1.4mm / 2.2mm
180x30-DCS-W40
16-20-25
£22.12
184 x 16.00
20
1.6mm / 2.6mm
184x16-DCS-W20
n/a
£22.66
190 x 20.00
24
1.6mm / 2.6mm
190x20-DCS-W24
12.75-16
£21.58
190 x 20.00
40
1.6mm / 2.6mm
190x20-DCS-W40
12.75-16
£24.00
190 x 30.00
24
1.6mm / 2.6mm
190x30-DCS-W24
16-20-25
£21.58
190 x 30.00
40
1.6mm / 2.6mm
190x30-DCS-W40
16-20-25
£24.00
200 x 30.00
24
1.6mm / 2.6mm
200x30-DCS-W24
16-20-25
£21.84
200 x 30.00
40
1.6mm / 2.6mm
200x30-DCS-W40
16-20-25
£26.44
210 x 30.00
24
1.6mm / 2.6mm
210x30-DCS-W24
16-20-25
£25.63
210 x 30.00
40
1.6mm / 2.6mm
210x30-DCS-W40
16-20-25
£28.86
216 x 30.00
24
1.6mm / 2.6mm
216x30-DCS-W24
16-20-25
£26.44
BRAND
BRAND DIMENSIONS
216 x 30.00
40
1.6mm / 2.6mm
216x30-DCS-W40
16-20-25
£29.94
216 x 30.00
80
1.6mm / 2.6mm
216x30-DCS-W80
16-20-25
£37.23
230 x 30.00
24
1.8mm / 2.6mm
230x30-DCS-W24
16-20-25
£29.40
DIMENSIONS
TEETH QTY
BODY / TIP
PART NO.
FREE BUSHES
230 x 30.00
40
1.8mm / 2.6mm
230x30-DCS-W40
16-20-25
£31.29
150 x 20.00
24
1.4mm / 2.2mm
150x20-DCS-W24-A
12.75-16
£16.18
£31.55
150 x 20.00
40
1.4mm / 2.2mm
150x20-DCS-W40-A
12.75-16
£18.89
LIST PRICE
250 x 30.00
40
2.2mm / 3.2mm
250x30-DCS-W40
20-25
250 x 30.00
60
2.2mm / 3.2mm
250x30-DCS-W60
20-25
£36.15
160 x 20.00
24
1.4mm / 2.2mm
160x20-DCS-W24-A
12.75-16
£17.16
254 x 30.00
40
2.2mm / 3.2mm
254x30-DCS-W40
20-25
£33.45
160 x 20.00
40
1.4mm / 2.2mm
160x20-DCS-W40-A
12.75-16
£19.69
300 x 30.00
48
2mm / 3mm
300x30-DCS-W48
20-25
£57.72
165 x 20.00
24
1.4mm / 2.2mm
165x20-DCS-W24-A
12.75-16
£17.53
300 x 30.00
60
2mm / 3mm
300x30-DCS-W60
20-25
£59.34
165 x 20.00
40
1.4mm / 2.2mm
165x20-DCS-W40-A
12.75-16
£18.89
305 x 30.00
32
2mm / 3mm
305x30-DCS-W32
20-25
£56.65
184 x 30.00
24
1.4mm / 2.2mm
184x30-DCS-W24-A
16-20-25
£17.81
305 x 30.00
100
2mm / 3mm
305x30-DCS-W100
20-25
£74.99
184 x 30.00
40
1.4mm / 2.2mm
184x30-DCS-W40-A
16-20-25
£22.66
ORDER LINE: 01909 552470
47
APPLICATIONS:
BEVEL much more.
HIGH GRADE ALLOY
WOODWORKING
CARBIDE TIPS:
SILVER FOR SECURE APPLICATIONS: BOND OF TIP Soft wood, hard wood, plasterboard,
CONFIGURE: ALTERNATE TOP STEEL PLATE:
CARBIDE TIPPED FOR WOOD WITH ANTI KICK BACK
ORDER LINE: 01909 552470
CIRCULAR SAW BLADES
CARBIDE TIPPED FOR METALS AND PLASTICS 48 CIRCULAR SAW: BORE:
MULTI-PURPOSE
REAMED FOR PRECISE FIT
CARBIDE TIPS: BRAZING:
CONFIGURE:
MULTI-PURPOSE A range of tungsten carbide tipped circular saw blades designed for a professional finish. Body hardened and tempered to retain trueness. High grade alloy steel is precision ground to maintain flatness.
SILVER FOR SECURE APPLICATIONS: BOND OF TIP Triple chip teeth for high end performance TRIPLE GROUND CHIP
in plastics & alloys.
Each saw blade comes with free bushes.
HIGH GRADE ALLOY
DIMENSIONS
TEETH QTY
BODY / TIP
PART NO.
FREE BUSHES
184 x 30.00
48
1.8mm / 2.6mm
184x30-DCS-M48
16-20-25
£30.75
210 x 30.00
60
1.6mm / 2.6mm
210x30-DCS-M60
16-20-25
£39.92
LIST PRICE
215 x 30.00
60
1.6mm / 2.6mm
215x30-DCS-M60
16-20-25
£41.54
250 x 30.00
60
2.0mm / 2.8mm
250x30-DCS-M60
16-20-25
£47.47
250 x 30.00
80
2.0mm / 2.8mm
250x30-DCS-M80
16-20-25
£51.79
250 x 30.00
100
2.0mm / 2.8mm
250x30-DCS-M100
16-20-25
£57.72
300 x 30.00
72
2.2mm / 3.0mm
300x30-DCS-M72
16-20-25
£73.91
300 x 30.00
96
2.2mm / 3.0mm
300x30-DCS-M96
16-20-25
£80.38
350 x 30.00
72
2.4mm / 3.2mm
350x30-DCS-M72
16-20-25
£107.35
ORDER LINE: 01909 552470
DIAMOND TILE DRILLS DIAMOND HOLE SAWS VERY HARD TILES, GRANITE AND GLASS
BRAND
STEEL PLATE:
TC3 CARBIDE
DESCRIPTION:
MULTI-PURPOSE
DIAMOND TILE DRILLS VERY HARD TILES / GRANITE / GLASS 50 DIAMOND TILE DRILL:
DU-CTD
SEGMENT HEIGHT:
N/A WET
DRY/WET:
WELDED TIP
MULTI PURPOSE
DESCRIPTION:
SEGMENT TYPE:
DIAMOND HOLE SAWS
YES
VENTILATION:
DIAMOND HOLE SAW:
PORCELAIN & CERAMIC A Top-Line range of welded tip diamond drills with a reverse spiral design to feed water to the cutting face, plus in-built core ejection system to prevent clogging.
DU-DHS
SEGMENT HEIGHT:
DRY/WET:
APPLICATIONS:
SEGMENT TYPE:
• Porcelain (grade 5) • Ceramic • Quarry tiles • Terracotta • Glazed tiles • Terrazzo • Marble • Agglomerates • Cement • Glass
REVERSE SPIRAL FOR WATER RETENTION AND IN BUILT CORE EJECTON
DIAMOND TILE DRILL KIT:
51 DESCRIPTION:
N/A BOTH N/A
VENTILATION:
YES
N/A
CORE PROTECTION:
MULTI-PURPOSE A top line range of multi-purpose, welded tip diamond holesaws with slots in the core barrel to clear waste material. APPLICATIONS:
WET - porcelain and quarry tiles, Class 5, granite, travertine, marble, reinforced glass and cement, stone - DRY - glass, polymers, fibreglass, decking, ply wood, mdf, plastics, laminates, perspex, brick, paving LUBRICATED - cast iron, virton, aluminium.
CTD-KIT DESCRIPTION:
INSTALLER KITS 5 piece kit in a durable hard plastic case containing on each of 5 popular plug sizes.
APPLICATION MULTI PACKS 5 piece kit in a durable hard plastic case containing 5 pieces of the same size drill.
Includes 5, 6, 7, 8 & 10mm.
Available in 6 & 7mm variants.
BRAND
BRAND
DESCRIPTION:
TYPICAL APPLICATION
SIZE / REF
DU-CTD
YELLOW PLUG
5MM
£18.56
RED PLUG
6MM
£18.56
DIMENSIONS
DU-DHS
RED PLUG MULTI PACK - (5 QTY)
6MM
£88.47
19.0 x 40.0
£35.07
BROWN PLUG
7MM
£18.56
22.0 x 40.0
£37.76
BROWN PLUG MULTI PACK - (5 QTY)
7MM
£88.47
29.0 x 40.0
£44.23
FISCHER NYLON PLUG
8MM
£18.56
35.0 x 40.0
£52.86
BLUE PLUG/BORE PIPE
10MM
£20.50
38.0 x 40.0
£54.49
COACH SCREW
12MM
£20.50
44.0 x 40.0
£60.42
15MM COPPER PIPE
16MM
£24.28
57.0 x 40.0
£70.13
18MM COPPER PIPE
20MM
£26.70
64.0 x 40.0
£77.14
22MM COPPER PIPE
25MM
£32.10
82.0 x 40.0
£89.55
28MM COPPER PIPE
30MM
£37.76
85.0 x 40.0
1½” WASTE PIPE
35MM
£44.23
105.0 x 40.0
£102.49
PLUG SIZES KIT -
5, 6, 7, 8 & 10MM
£102.49
114.0 x 40.0
£125.15
ORDER LINE: 01909 552470
£96.02
ORDER LINE: 01909 552470
TILE DRILLS & HOLESAWS DIAMOND DRILLING ACCESSORIES 52 DIAMOND TILE DRILL WATER FEED & GUIDE:
WDS2
DESCRIPTION:
DESCRIPTION:
WATER FEED Water is held in the plastic container and allowed to flow through to the drilling point in a steady amount. The unit is held firmly onto the tile surface by wetting the neoprene on the reverse of the unit.
DRILL GUIDE The v-shaped internal design of the drilling guide means that all DURO tile drill sizes can be accommodated in this single unit. The v-shaped guide holds the tile drill in position when drilling is commenced.
DIAMOND HOLE SAW:
ADAPTORS
DESCRIPTION:
USAGE:
DRIVE ADAPTORS A range of adaptors for multi-purpose, welded tip diamond holesaws.
DRIVE ADAPTORS Allows holesaws to be driven by either SDS Plus or 3 jaw chuck rotary power tools. There are two sizes of adaptor to cover the full range of holesaws.
DIAMOND HOLE SAW:
ADAPTORS
DESCRIPTION:
USAGE:
ANGLE GRINDER DRIVE ADAPTOR An adaptor to enable the use of the multi-purpose holesaws on standard angle grinders.
ANGLE GRINDER DRIVE ADAPTOR Allowing these multi-purpose holesaws to be used on any brand of angle grinder.
N.B 35mm diameters and above of holesaws only.
N.B Not for use on 4” (100mm) angle grinders.
BRAND
DIAMOND TILE BLADES SUPER THIN PORCELAIN TILE BLADES CERAMIC TILE BLADES
DESCRIPTION
REF
WATER FEED AND DRILL GUIDE UNIT
WDS2
£12.20
SDS 9.5MM ADAPTOR
DU-DHS-SDS-9.5A
£7.77
SDS 13MM ADAPTOR
DU-DHS-SDS-13A
£9.71
HEX 9.5MM ADAPTOR
DU-DHS-HEX-9.5A
£7.77
HEX 13MM ADAPTOR
DU-DHS-HEX-13A
£9.71
ANGLE GRINDER ADAPTOR
DU-DHS-AG-ADAPTOR
£46.24
9.5mm adaptors for use on 19-29mm, 13mm adaptors for use on 35mm and above
ORDER LINE: 01909 552470
DIAMOND TILE BLADES PORCELAIN AND CERAMIC 54
SUPER THIN PORCELAIN DIAMOND BLADE: SEGMENT HEIGHT: DRY/WET:
DUT*
10MM
BOTH UP TO 125MM WET ABOVE 125MM CONTINUOUS TURBO RIM
SEGMENT TYPE:
VENTILATION:
YES
NO
CORE PROTECTION:
CERAMIC DIAMOND BLADE: SEGMENT HEIGHT: DRY/WET:
DPT
PORCELAIN & CERAMIC Super thin at 1.4 mm thick (115, 125mm & 150mm), this blade has a continuous rim and turbo design to cut quickly and not chip the materials. Reinforced flange for stability. APPLICATIONS:
Porcelain, ceramic, natural stone and other very hard tiles. Can be used dry up to 180mm but water is recommended above this dimension.
DESCRIPTION:
10MM
CERAMIC A range of continuous rim tile saw blades for angle grinders and fixed machines.
BOTH UP TO 180MM WET ABOVE 180MM
SEGMENT TYPE: CONTINUOUS
RIM
VENTILATION:
NO
NO
APPLICATIONS:
All types of ceramic and stone tiles. Can be used dry up to 180mm but water is recommended above this dimension.
BRAND
CORE PROTECTION:
DESCRIPTION:
DIMENSIONS (4½”) 115 x 1.4 x 22.2
DUT
(4½”) 115 x 1.6 x 22.2 (5”) 125 x 1.4 x 22.2
£73.36
£172.62
(12”) 300 x 2.4 x 25.4 (14”) 350 x 2.2 x 25.4
£62.57
£118.68
(10”) 250 x 1.8 x 25.4 (12”) 300 x 2.0 x 25.4
£55.02
£107.89
(9”) 230 x 1.8 x 25.4 (10”) 250 x 1.6 x 25.4
£44.23
£91.70
(8”) 200 x 1.6 x 25.4 (9”) 230 x 1.6 x 25.4
£33.45
£75.52
(7”) 180 x 1.6 x 25.4 (8”) 200 x 1.6 x 25.4
£24.81
£59.34
(6”) 150 x 1.6 x 25.4 (7”) 180 x 1.6 x 25.4
£21.58
£44.23
(5”) 125 x 1.6 x 22.2 (6”) 150 x 1.4 x 25.4
DPT
£42.08
£151.04
£215.78
(14”) 350 x 3.4 x 25.4
£192.04
* New reinforced flange to be introduced during 2013
ORDER LINE: 01909 552470
HAMMER DRILLS SDS PLUS DRILL BITS SDS MAX DRILL BITS
HAMMER DRILLS
HAMMER DRILLS
SDS PLUS DRILL BITS 56 DRILL BIT:
DP-SPLUS
SHANK STYLE: TIP TYPE:
DESCRIPTION:
SDS PLUS
SINTERED CARBIDE HIGH MELTING POINT
BONDING METHOD:
FLUTE SHAPE: FAST, SINGLE TIP / CROSS HEAD:
SDS PLUS DRILL BITS - EXTRA LONG
DEEP SPIRAL
DRILL BIT:
SDS PLUS DRILL BITS Premium quality with high quality jointing methods between tip and body. Precision machined SDS+ shank to limit power tool wear with special flute design for speed & strength.
SHANK STYLE: TIP TYPE:
DESCRIPTION:
SDS PLUS
SINTERED CARBIDE HIGH MELTING POINT
BONDING METHOD:
APPLICATIONS:
All masonry and concrete types. Truer, rounder holes for all fixings applications and through holes.
FLUTE SHAPE: F AST,
SINGLE TIP
SINGLE TIP / CROSS HEAD:
DEEP SPIRAL
SDS PLUS DRILL BITS - EXTRA LONG Premium quality with high quality jointing methods between tip and body. Precision machined SDS+ shank to limit power tool wear with special flute design for speed & strength. APPLICATIONS:
All masonry and concrete types. Truer, rounder holes for all fixings applications and through holes.
SINGLE TIP
* Please note during 2013 product design will change
BRAND
* Please note during 2013 product design will change
DP-SPLUS*
DP-SPLUS
4.0 x 110 5.0 x 110 5.5 x 110 6.0 x 110 6.5 x 110 7.0 x 110 8.0 x110 10.0 x 110
£3.06 £1.56 £1.56 £1.56 £1.64 £1.64 £1.64 £1.79
4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160 8.0 x 160 9.0 x 160 10.0 x 160 11.0 x 160 12.0 x 160
£3.60 £1.64 £1.72 £1.72 £1.79 £1.87 £1.87 £4.01 £1.94 £5.85 £2.24
5.0 x 210 5.5 x 210 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 9.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 18.0 x 210 20.0 x 210
£2.32 £2.32 £2.32 £2.38 £2.46 £2.46 £5.70 £2.68 £3.06 £4.29 £5.05 £5.90 £7.92
5.5 x 260 6.0 x 260 6.5 x 260 8.0 x 260 10.0 x 260 11.0 x 260 12.0 x 260 14.0 x 260 16.0 x 260 18.0 x 260 20.0 x 260
£3.11 £3.11 £3.28 £3.37 £3.71 £7.50 £4.21 £5.14 £5.73 £8.08 £10.19
10.0 x 310 12.0 x 310 14.0 x 310 16.0 x 310 18.0 x 310 20.0 x 310
£4.21 £4.89 £5.98 £6.48 £8.08 £10.19
8.0 x 450 10.0 x 450 12.0 x 450 13.0 x 450 14.0 x 450 16.0 x 450 18.0 x 450 20.0 x 450 25.0 x 450
£6.48 £6.48 £6.99 £12.95 £8.34 £9.51 £11.28 £14.07 £20.72
ORDER LINE: 01909 552470
BRAND
DIMENSIONS
DIMENSIONS
57
DP-SPLUS
8.0 x 600 10.0 x 600 12.0 x 600 14.0 x 600 16.0 x 600 18.0 x 600 20.0 x 600 22.0 x 600 25.0 x 600
£15.71 £16.64 £17.38 £20.68 £26.11 £32.56 £37.12 £39.11 £48.55
10.0 x 1000 12.0 x 1000 14.0 x 1000 16.0 x 1000 18.0 x 1000 20.0 x 1000 22.0 x 1000 25.0 x 1000
£36.62 £37.35 £42.56 £43.80 £47.86 £52.51 £68.44 £72.50
ORDER LINE: 01909 552470
HAMMER DRILLS SDS MAX DRILL BITS 58 DRILL BIT:
DP-SMAX
DESCRIPTION:
SHANK STYLE: TIP TYPE:
SDS MAX
SINTERED CARBIDE
BONDING METHOD:
FLUTE SHAPE: F AST,
COPPER BRAZED DEEP SPIRAL
DP-SMAX-CROSS
SHANK STYLE: TIP TYPE:
All masonry and concrete types. Truer, rounder holes for all fixings applications and through holes.
DESCRIPTION:
SDS MAX
SINTERED CARBIDE
BONDING METHOD:
COPPER BRAZED
FLUTE SHAPE: F AST,
DEEP SPIRAL
SINGLE TIP / CROSS HEAD:
CROSS
SDS MAX CROSS HEAD DRILL BITS Premium quality with high quality jointing methods between tip and body. Precision machined SDS Max shank to limit power tool wear - extra tips limit vibration. APPLICATIONS:
All masonry and concrete types. Truer, rounder holes for all fixings applications and through holes.
BRAND
APPLICATIONS:
SINGLE
SINGLE TIP / CROSS HEAD:
DRILL BIT:
SDS MAX SINGLE TIP DRILL BITS Premium quality with high quality jointing methods between tip and body. Precision machined shank to limit power tool wear with high concentricity between tip / body / shank.
DIMENSIONS
12.0 x 390 12.0 x 540 13.0 x 390 13.0 x 540 14.0 x 390 14.0 x 540 15.0 x 390 15.0 x 540 16.0 x 305 16.0 x 450 18.0 x 305 18.0 x 450 20.0 x 285 20.0 x 430 22.0 x 285 22.0 x 430 25.0 x 285 25.0 x 430
DIMENSIONS
16.0 x 390 16.0 x 540 16.0 x 920 18.0 x 390 18.0 x 540 19.0 x 390 19.0 x 540 20.0 x 370 20.0 x 520 20.0 x 920 22.0 x 370 22.0 x 520 22.0 x 920 24.0 x 370 24.0 x 520 25.0 x 370 25.0 x 520 25.0 x 920 26.0 x 370 26.0 x 520 28.0 x 370 28.0 x 570 30.0 x 370 30.0 x 570 32.0 x 370 32.0 x 570 32.0 x 920 35.0 x 570 38.0 x 570 40.0 x 570
DP-SMAX £30.44 £41.03 £32.67 £41.46 £33.62 £41.98 £34.22 £43.76 £28.98 £32.85 £29.94 £34.26 £30.97 £37.81 £32.67 £39.63 £37.39 £44.26 DP-SMAX-CROSS £46.11 £51.35 £104.77 £46.51 £51.35 £47.30 £51.35 £54.38 £56.36 £107.55 £54.38 £56.36 £109.46 £60.88 £62.32 £60.88 £62.32 £161.77 £68.26 £73.43 £65.15 £73.43 £68.89 £76.13 £72.07 £79.31 £166.61 £89.30 £119.47 £138.03
ORDER LINE: 01909 552470
SDS PLUS CHISELS
INNOVATIVE APPLICATION SPECIFIC CHISELS STANDARD POINTS & CHISELS
SDS PLUS CHISELS INNOVATION CHISELS 60 CHISEL:
DP-SDS-MRC
SHANK STYLE:
SDS PLUS
FORGED STEEL WITH CARBIDE TIPS
HEAD TYPE:
BRAZE:
COPPER
BODY STYLE:
CRANKED BODY
CHISEL:
DP-SDS-BRC
SHANK STYLE:
SDS PLUS
FORGED STEEL WITH CARBIDE TIPS
HEAD TYPE:
COPPER
BRAZE: BODY STYLE: FLAT
CHISEL:
SHANK STYLE: ACTION: HEAD TYPE:
SDS PLUS HAMMER ONLY
HAMMER ONLY
FORGED STEEL WITH MACHINED HEAD
HEAD TYPE:
APPLICATIONS:
All types of mortar and all depths of mortar. Use in conjunction with an SDS plus machine with roto-stop.
BRAZE:
N/A
BODY STYLE:
CRANKED
DP-SDS-RC
CHISEL:
BRICK REMOVING CHISEL Allows removal of whole bricks without damaging them and the bricks around them. Long blade allows penetration to full brick depth with carbide tips for long life.
SHANK STYLE:
SDS PLUS
FORGED STEEL WITH CARBIDE INSERT
HEAD TYPE:
APPLICATIONS:
All types of mortar and all depths of mortar. Use in conjunction with an SDS plus machine with roto-stop.
COPPER
BRAZE: BODY STYLE: FLAT
CHISEL:
TILE REMOVING CHISEL Angled blade ensures impact energy is exerted underneath the tile and not into the floor / wall. Can be used to remove adhesive and plaster.
ACTION:
SDS PLUS HAMMER ONLY
FORGED STEEL WITH SCUTCH INSERTS
N/A
BRAZE:
N/A
WIDE HEAD
BODY STYLE:
FLAT - SCUTCH HEAD
BRAZE:
CARBIDE TIPPED RAKING CHISELS For general masonry work in hard materials. e.g channel chasing in engineering bricks. Carbide tipped for long life. 30mm and 55mm versions. APPLICATIONS:
All types of brick and masonry including engineering brick. Also concrete.
SCUTCH COMB CHISEL Allows scutching operations using SDS plus machines instead of hand held. Interchangeable ends mean no sharpening is necessary. Can also be used with ‘droves’. APPLICATIONS:
All types of masonry - dressing, chasing etc. Multi purpose tool, extremely versatile.
Shank /Chuck Maintenance Advice - SDS Plus Shanks should be regularly lubricated before, during and after use.
BRAND
Shank /Chuck Maintenance Advice - SDS Plus Shanks should be regularly lubricated before, during and after use.
Medium density block and soft brick. Standard conduit (30mm) / capping runs (55mm) and channelling behind skirting with long neck version (20mm).
DESCRIPTION:
HEAD TYPE:
APPLICATIONS:
APPLICATIONS:
- NARROWED END
DP-SDS-SC
SHANK STYLE:
CHANNELLING CHISELS Quickly produce channels for cable runs etc. Dust doesn’t become airborne as tends to be in chunks. Can be used in conjunction with a wall chasing machine.
DESCRIPTION:
HAMMER ONLY
ACTION:
F ORGED STEEL All types tile, plaster and adhesives.
BODY STYLE: CRANKED -
DESCRIPTION:
SDS PLUS
ACTION:
DESCRIPTION:
SHANK STYLE:
- NARROWED END
DP-SDS-TRC
61
DP-SDS-CC
CHISEL:
MORTAR RAKING CHISEL Allows mortar removal without damaging brick and up to window and door frames and behind pipework. Debris in chunks as opposed to dust. Carbide tipped for long life.
DESCRIPTION:
HAMMER ONLY
ACTION:
INNOVATION CHISELS
DESCRIPTION:
HAMMER ONLY
ACTION:
SDS PLUS CHISELS
BRAND
DIMENSIONS
DIMENSIONS
DP-SDS-CC30 (Std Conduit)
£60.56
DP-SDS-CC55 (Capping Runs)
£66.93
DP-SDS-CC20 (Extended Reach)
£62.65
DP-SDS-RC30 (Raking Chisel)
£65.13
DP-SDS-RC55 (Raking Chisel)
£70.89
DP-SDS-MRC (Mortar Raker)
£31.46
DP-SDS-BRC (Brick Remover)
£52.47
DP-SDS-SC-HOLDER £48.27 (Scutch Comb Holder)
DP-SDS-TRC (Tile Remover)
£26.97
DP-SDS-SC (Scutch Combs)
ORDER LINE: 01909 552470
£1.73
ORDER LINE: 01909 552470
SDS PLUS CHISELS POINTS & CHISELS 62 CHISEL:
DP-SDS-POINT
SHANK STYLE:
DESCRIPTION:
SDS PLUS HAMMER ONLY
ACTION:
FORGED STEEL
HEAD TYPE:
N/A
BRAZE:
SDS PLUS POINTS General purpose masonry work, especially useful for chopping out drilled core holes. 250mm overall length. APPLICATIONS:
All types of brick and masonry including engineering brick and concrete.
BODY STYLE: STRAIGHT - CHISEL POINT
CHISEL:
DP-SDS-CHISEL
SHANK STYLE:
DESCRIPTION:
SDS PLUS HAMMER ONLY
ACTION:
F ORGED STEEL
HEAD TYPE: BRAZE:
N/A
BODY STYLE:
STRAIGHT - FLAT CHISEL
CHISEL:
DP-SDS-SCHISEL
SHANK STYLE:
SDS PLUS
F ORGED STEEL
HEAD TYPE: BRAZE:
N/A
BODY STYLE:
STRAIGHT - FLAT CHISEL
CHISEL:
DP-SDS-EWC
SHANK STYLE: ACTION: HEAD TYPE:
APPLICATIONS:
All types of brick and masonry including engineering brick and concrete.
DESCRIPTION:
HAMMER ONLY
ACTION:
SDS PLUS CHISEL General purpose masonry work. 20mm wide chisel end. 250mm overall length.
SDS PLUS SCALING CHISEL General purpose masonry work. 40mm wide chisel end. 250mm overall length. APPLICATIONS:
All types of brick and masonry including engineering brick and concrete.
DESCRIPTION:
SDS PLUS HAMMER ONLY FORGED STEEL
BRAZE:
N/A
BODY STYLE:
FLAT - WIDE HEAD
EXTRA WIDE CHISEL Extra wide 80mm blade for general purpose masonry work including chopping out electrical back boxes to size. 150mm overall length. APPLICATIONS:
Medium density block, soft brick through to engineering brick.
SDS MAX POINTS & CHISELS BREAKER STEELS
BRAND
STANDARD POINTS, CHISELS & BREAKER STEELS INNOVATIVE APPLICATION SPECIFIC CHISELS
DIMENSIONS DP-SDS-POINT
£7.24
DP-SDS-CHISEL
£6.78
DP-SDS-SCHISEL (Scaling)
£9.40
DP-SDS-EWC80 (Wide Chisel)
£15.73
ORDER LINE: 01909 552470
SDS MAX CHISELS POINTS & CHISELS 64 CHISEL:
DP-SMAX-POINT
SHANK STYLE:
SDS MAX
F ORGED STEEL
HEAD TYPE:
SDS MAX BREAKER STEELS
DESCRIPTION:
HAMMER ONLY
ACTION:
SDS MAX CHISELS
N/A
BRAZE:
CHISEL:
SDS MAX POINTS General purpose masonry work, especially useful for chopping out drilled core holes. Option 1 - 360mm overall length Option 2 - 500mm overall length
DP-SMAX-BRC
SHANK STYLE:
SDS MAX HAMMER ONLY
ACTION:
FORGED STEEL WITH CARBIDE TIPS
HEAD TYPE:
COPPER
BRAZE: BODY STYLE: FLAT
CHISEL:
SHANK STYLE:
HAMMER ONLY
ACTION:
F ORGED STEEL
HEAD TYPE: BRAZE:
N/A
BODY STYLE:
STRAIGHT - FLAT CHISEL
CHISEL:
DP-SMAX-EWC
SHANK STYLE: ACTION: HEAD TYPE:
HAMMER ONLY FORGED STEEL N/A
BODY STYLE:
FLAT - WIDE HEAD
CHISEL:
SDS MAX
F ORGED STEEL
DP-SMAX-SCHOLDER
SDS MAX
FORGED STEEL WITH SCUTCH INSERTS
HEAD TYPE:
All types of brick and masonry including engineering brick and concrete.
BRAZE:
N/A
BODY STYLE:
FLAT - SCUTCH HEAD
CHISEL:
EXTRA WIDE CHISEL - SDS MAX Extra wide 50mm & 80mm blade for general purpose masonry work including chopping out electrical back boxes to size (80mm only).
DP-SMAX-SDS-AD
SHANK STYLE:
HEAD TYPE:
Medium density block, soft brick through to engineering brick. 300mm overall length.
APPLICATIONS:
The type of pad is selected to suit the type of compaction operation required whether this be for back filling following emergency repairs to services or compaction of mould in industrial applications.
SCUTCH COMB HOLDER Allows scutching operations using SDS Max machines instead of hand held. Interchangeable ends mean no sharpening is necessary. Can also be used with ‘droves’. APPLICATIONS:
All types of masonry - dressing, chasing etc. Multi purpose tool, extremely versatile.
DESCRIPTION:
SDS MAX
ACTION: HAMMER &
APPLICATIONS:
FLOOR CLEANING PAD - STEM For use in conjunction with tamping pads and floor cleaning tool.
DESCRIPTION:
HAMMER ONLY
ACTION:
APPLICATIONS:
Favoured by tunnelling contractors and companies specialising in under pinning in clay conditions. Also excellent for general garden and landscaping
HAMMER ONLY
N/A
SHANK STYLE:
APPLICATIONS:
DESCRIPTION:
BODY STYLE: STRAIGHT WITH STEM END
SDS MAX CHISELS General purpose masonry work. 25mm wide chisel end. Option 1 - 360mm overall length Option 2 - 500mm overall length
CLAY SPADE Clayspade is a purpose designed blade for cutting / digging bolder clay.
ROTARY N/A
BRAZE:
N/A
BODY STYLE:
ADAPTOR
SDS PLUS TO SDS MAX ADAPTOR Allows SDS Plus drill bits and accessories to be used in SDS Max machines giving flexibility of user options. APPLICATIONS:
Dependent on drill or accessory to be inserted.
DIMENSIONS
BRAND
BRAND
BRAZE:
DP-SMAX-STEM
BRAZE:
DESCRIPTION:
SDS MAX
FLAT - WIDE HEAD
HEAD TYPE:
All types of mortar and all depths of mortar. Use in conjunction with an SDS max machine with roto-stop.
DESCRIPTION:
SDS MAX
BODY STYLE:
ACTION:
- NARROWED END
DP-SMAX-CHISEL
FORGED STEEL N/A
SHANK STYLE:
APPLICATIONS:
SDS MAX
BRAZE:
CHISEL:
BRICK REMOVING CHISEL Allows removal of whole bricks without damaging them and the bricks around them. Long blade allows penetration to full brick depth with carbide tips for long life.
DESCRIPTION:
HAMMER ONLY
HEAD TYPE:
All types of brick and masonry including engineering brick and concrete.
DESCRIPTION:
ACTION:
BODY STYLE: STRAIGHT - CHISEL POINT
CHISEL:
DP-SMAX-CSPADE
SHANK STYLE:
APPLICATIONS:
65
DP-SMAX-POINT360 (360mm)
£13.54
DP-SMAX-POINT500 (500mm)
£19.15
DP-SMAX-BRC (Brick Remover)
£70.13
DIMENSIONS
DP-SMAX-CHISEL360 (360mm)
£13.54
DP-SMAX-CSPADE
£91.70
DP-SMAX-CHISEL500 (500mm)
£19.15
DP-SMAX-STEM
£34.52
DP-SMAX-EWC50 (Wide Chisel)
£23.91
DP-SMAX-SCHOLDER
£58.26
DP-SMAX-EWC80 (Wide Chisel)
£26.16
DP-SMAX-SDS-AD
£61.50
ORDER LINE: 01909 552470
ORDER LINE: 01909 552470
BREAKER STEELS
BREAKER STEELS
KEY 66 CODE
DESCRIPTION
PNEUMATIC BREAKER STEELS
DIAGRAM STEEL:
1
2
3
67
MOIL POINT - 380/450mm under collar Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for demolition work and starting holes in the centre of a concrete slab. The most common of the demolition steels used for general breaking where there is not a requirement to control the line of fracture.
DESCRIPTION
NARROW CHISEL - 380/450mm under collar Narrow Chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the workpiece to be broken.
75mm WIDE CHISEL - 380mm under collar Wide Chisel used generally where softer material is to be cut or broken again used on applications where the line of fracture needs to be controlled.
32x160mm (1-¼” x 6-¼”) - Hex Shank
STEEL:
Moil Point - 380mm under collar Moil Point - 450mm under collar Narrow chisel - 380mm under collar Narrow chisel - 450mm under collar 75mm Wide chisel Tarmac Cutter - 115mm wide Clayspade - 133x302 Blade Stem for use with 180mm Pad Tamping Pad - 180mm
PART NO. 32.0x160HX-MP380 32.0x160HX-MP450 32.0x160HX-NC380 32.0x160HX-NC450 32.0x160HX-75WC380 32.0x160HX-115WTC300 32.0x160HX-135x20CSPADE 32.0x160HX-STEM 180MM DIAMETER PAD
28x160mm (1-1/8” x 6-¼”) - Hex Shank DESCRIPTION
4
5
6
115mm WIDE TARMAC CUTTER Tarmac Cutter used for cutting of Coated stone the wedge shape of the side profile is preferred by many operators as it facilitates easy removal of the blade after each cut.
CLAYSPADE Clayspade is a purpose designed blade for cutting / digging of bolder clay. The clay spade geometry facilitates the cutting action to return to an open face. If the cutting edge is damaged by stone contamination in the burden to be cut it will damage the cutting edge and destroy the natural scooping action. This tool is favoured by tunnelling contractors and companies specialising in under pinning in clay conditions. Also excellent for general garden and landscaping.
STEEL:
7
TAMPING PAD - 180mm Dia Floor cleaning tool.
8
WIDE ASPHALT CUTTER Asphalt Cutter similar in application to the Tarmac Cutter but has the benefit of a thinner parallel side profile and radius on the blade allowing faster penetration in the cutting action. Suitable for lighter weight and less powerful breakers. MOIL POINT 330mm under collar The most common of the demolition steels used for general breaking where there is not a requirement to control the line of fracture.
10
NARROW CHISEL 330mm under collar Narrow Chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the burden to be broken.
11
STEM - FLOOR CLEANING TOOLS AND PADS Stem for floor cleaning tool is available with different shank types and facilitates the use of the smaller electric tamping pads and especially the floor cleaning tool.
12
FLOOR CLEANING TOOL Floor Cleaning Tool used in conjunction with a shank to suite the type of breaker to be used. The floor cleaning tool has a flexible replacement blade held in place by retaining bolts and can be used for the removal of lino tiles or debris spilt on to concrete floors prior to finishing.
ORDER LINE: 01909 552470
28.0x160HX-MP380 28.0x160HX-MP450 28.0x160HX-NC380 28.0x160HX-NC450 28.0x160HX-75WC380 28.0x160HX-115WTC300 28.0x160HX-STEM 180MM DIAMETER PAD
DESCRIPTION
LIST £27.73 £29.67 £27.73 £29.67 £49.31 £56.43 £57.13 £123.32
Moil Point - 380mm under collar Moil Point - 450mm under collar Narrow chisel - 380mm under collar Narrow chisel - 450mm under collar Tarmac Cutter - 115mm wide
PART NO. 25.0x108HX-MP380 25.0x108HX-MP450 25.0x108HX-NC380 25.0x108HX-NC450 25.0x108HX-115WTC300
LIST £27.73 £29.67 £27.73 £29.67 £56.43
STEEL:
9
PART NO.
Moil Point - 380mm under collar Moil Point - 450mm under collar Narrow chisel - 380mm under collar Narrow chisel - 450mm under collar 75mm Wide chisel Tarmac Cutter - 115mm wide Stem for use with - 180mm Pad Tamping Pad - 180mm
25x108mm (1” x 4-¼”) - Hex Shank
STEM - use with 180mm Dia Tamping Pad These tools need to be used together the stem can have a number of shank configurations to suit both Pneumatic and Electric powered breakers. The pad is selected to suit the type of compaction operation required whether this be for back filling following emergency repairs to services or compaction of mould in industrial applications.
LIST £27.73 £29.67 £27.73 £29.67 £49.31 £56.43 £95.59 £57.13 £123.32
22x82mm (7/8” x 3-¼”) - Hex Shank DESCRIPTION
PART NO.
LIST
Moil Point - 380mm under collar 22.0x82HX-MP380 £27.73 Moil Point - 450mm under collar 22.0x82HX-MP450 £29.67 Narrow chisel - 380mm under collar 22.0x82HX-NC380 £27.73 Narrow chisel - 450mm under collar 22.0x82HX-NC450 £29.67 125mm Wide Asphalt Cutter - 300mm under collar 22.0x82HX-125WTC300 £56.43
STEEL:
19x50mm (¾” x 2”) - Hex Shank DESCRIPTION Moil Point - 250mm under collar Narrow chisel - 250mm under collar Clayspade - 100x165mm
PART NO. 19.0x50HX-MP250 19.0x50HX-NC250 19.0x50HX-100X165CS
ORDER LINE: 01909 552470
LIST £18.89 £18.89 £110.05
BREAKER STEELS
BREAKER STEELS
PNEUMATIC BREAKER STEELS 68 STEEL:
ELECTRIC BREAKER STEELS
25x75mm Round Shank DESCRIPTION Moil Point - 330mm under collar Narrow chisel - 330mm under collar
STEEL:
PART NO. 25.0X75RS-MP330 25.0X75RS-NC330
DESCRIPTION
STEEL:
C P 9 S Shank (for ball retainer chuck) DESCRIPTION Point - 250mm o/a length Narrow chisel - 250mm o/a length 75mm Wide chisel - 250mm o/a length
PART NO. CP9S-P250 CP9S-NC250 CP9S-WC250
Kango 900/950 Shank Breaker Steels
LIST £27.73 £27.73
STEEL:
69
Moil Point - 380mm o/a length Moil Point - 450mm o/a length Narrow chisel - 380mm o/a length Narrow chisel - 450mm o/a length 50mm Wide chisel - 300mm o/a length 75mm Wide chisel - 300mm OAL Stem-floor cleaning tool & pad 275mm o/a Clayspade - 100x165 Blade Comb Holder
PART NO. K900/950-MP380 K900/950-MP450 K900/950-NC380 K900/950-NC450 K900/950-50WC300 K900/950-75WC300 K900/950-STEM
K900/950-CSPADE K900/950-SCHOLDER
LIST £11.87 £13.49 £11.87 £13.49 £20.50 £21.58 £24.81 £70.13 £48.55
HILTI 905 & 1000 DESCRIPTION
LIST
PART NO.
LIST
Moil Point - 500mm o/a length H905/1000-MP500 £29.67 Narrow chisel - 500mm o/a length H905/1000-NC500 £29.67 75mm Wide chisel - 500mm o/a length H905/1000-75WC500 £52.33 Clayspade - 100x165 Blade H905/1000-CSPADE £80.17 Stem for Floor Cleaning Tool & Pads 275mm o/a H905/1000-STEM £40.46
£13.86 £13.86 £32.37
STEEL:
BOSCH 11205 DESCRIPTION Moil Point - 380mm o/a length Narrow chisel - 380mm o/a length
STEEL:
PART NO. B11205-MP380 B11205-NC380
BOSCH 11304 USH 27 DESCRIPTION
Moil Point - 450mm overall length Narrow chisel - 450mm overall length Tarmac Cutter 115mm wide Clayspade - 100x165 Blade
PART NO. B11304-MP450 B11304-NC450 B11304-115WTC B11304-CSPADE
(CLAYSPADE ONLY AVAILABLE WITH COLLAR)
ORDER LINE: 01909 552470
LIST £15.10 £15.10
ORDER LINE: 01909 552470
LIST £25.57 £25.57 £77.68 £99.26
breaker accessories 70 STEEL:
ACCESSORIES DESCRIPTION
PART NO.
LIST
100mm dia Tamping Pads for electric hammer stems 100MM DIAMETER PAD £89.55 125x150mm dia Tamping Pads for electric hammer stems 125-150MM DIAM PAD £161.83 Floor Cleaning Tool for use with electric hammer stems FLOOR CLEANING TOOL £140.25 Spare 2mm blade for floor cleaning tool CLEAN TOOL BLADE £30.75
ABRASIVE DISCS STEEL & INOX STEEL STONE
ORDER LINE: 01909 552470
ABRASIVE DISCS
ABRASIVE DISCS
STEEL & INOX 72
ABRASIVE DISC: SHAPE:
STEEL / STEEL & INOX
41 FLAT CUTTING
DESCRIPTION:
FLAT
STEEL & INOX A range of high performance thin cutting discs for angle grinders.
2
LAYERS OF REINFORCING:
80m/s
CUT OFF/GRIND:
ABRASIVE DISC:
42 D.C CUTTING
SHAPE:
CUT OFF
DEPRESSED CENTRE
80m/s
CUT OFF/GRIND:
ABRASIVE DISC:
27 D.C GRINDING
SHAPE:
CUT OFF
2
GRIT TYPE:
APPLICATIONS:
80m/s
CUT OFF/GRIND:
DESCRIPTION:
ABRASIVE DISC:
41 FLAT CUTTING
SHAPE:
CUT OFF
STEEL & INOX A range of high performance cutting discs for fixed cut-off machines.
2
GRIT TYPE: COATED ALUM OXIDE APPLICATIONS: - FREE OF FE, S & CL <0.1% All mild carbon steel and stainless MAX SPEED:
BOX QUANTITY = 25pcs
BOX QUANTITY = 10pcs
DESCRIPTION:
FLAT
LAYERS OF REINFORCING:
steel types.
STEEL A range of high performance cutting discs for 12” petrol and electric cut-off machines.
COATED ALUM OXIDE All mild carbon steel types.
BOX QUANTITY = 25pcs
STEEL & INOX A range of high performance cutting discs for angle grinders.
DESCRIPTION:
FLAT
MAX SPEED:
GRIT TYPE: COATED ALUM OXIDE APPLICATIONS: - FREE OF FE, S & CL <0.1% All mild carbon steel and stainless MAX SPEED:
steel types.
2
LAYERS OF REINFORCING:
SHAPE:
41H FLAT CUTTING
LAYERS OF REINFORCING:
GRIT TYPE: COATED ALUM OXIDE APPLICATIONS: - FREE OF FE, S & CL <0.1% All mild carbon steel and stainless MAX SPEED:
ABRASIVE DISC:
73
CUT OFF/GRIND:
80m/s CUT OFF
steel types.
BOX QUANTITY = 10pcs
DESCRIPTION:
DEPRESSED CENTRE
STEEL & INOX A range of high performance grinding discs for angle grinders.
3
LAYERS OF REINFORCING:
GRIT TYPE: COATED ALUM OXIDE APPLICATIONS: - FREE OF FE, S & CL <0.1% All mild carbon steel and stainless MAX SPEED:
GRIND
steel types.
BOX QUANTITY = 10pcs
STEEL & INOX 41 FLAT CUTTING
SPECIFICATION
PART NO.
LIST PRICE
A60BF Inox Duo A46BF Inox Duo A30BF Inox Duo A60BF Inox Duo A46BF Inox Duo A30BF Inox Duo A60BF Inox Duo A46BF Inox Duo A30BF Inox Duo A30BF Inox Duo A46BF Inox Duo A30BF Inox Duo
F100-16-ADMI-1.0 F100-16-ADMI-1.6 F100-16-ADMI-2.5 F115-22.2-ADMI-1.0 F115-22.2-ADMI-1.6 F115-22.2-ADMI-2.5 F125-22.2-ADMI-1.0 F125-22.2-ADMI-1.6 F125-22.2-ADMI-2.5 F180-22.2-ADMI-3.0 F230-22.2-ADMI-1.9 F230-22.2-ADMI-3.0
£1.02 £1.02 £0.79 £1.04 £1.04 £0.85 £1.06 £1.06 £0.94 £1.29 £2.35 £1.59
41 Flat Cutting - (4”) 100 x 1.0 x 16.0 41 Flat Cutting - (4”) 100 x 1.6 x 16.0 41 Flat Cutting - (4”) 100 x 2.5 x 16.0 41 Flat Cutting - (4½”) 115 x 1.0 x 22.2 41 Flat Cutting - (4½”) 115 x 1.6 x 22.2 41 Flat Cutting - (4½”) 115 x 2.5 x 22.2 41 Flat Cutting - (5”) 125 x 1.0 x 22.2 41 Flat Cutting - (5”) 125 x 1.6 x 22.2 41 Flat Cutting - (5”) 125 x 2.5 x 22.2 41 Flat Cutting - (7”) 180 x 3.0 x 22.2 41 Flat Cutting - (9”) 230 x 1.9 x 22.2 41 Flat Cutting - (9”) 230 x 3.0 x 22.2
STEEL & INOX 42 DEPRESSED CENTRE CUTTING
SPECIFICATION
PART NO.
LIST PRICE
A30BF Inox Duo A30BF Inox Duo A30BF Inox Duo A30BF Inox Duo
D100-16-ADMI-2.5 D115-22.2-ADMI-2.5 D125-22.2-ADMI-2.5 D180-22.2-ADMI-3.0
£0.79 £0.85 £0.94 £1.29
42 Depressed Centre Cutting - (9”) 230 x 3.0 x 22.2
A30BF Inox Duo
D230-22.2-ADMI-3.0
£1.67
STEEL & INOX 27 DEPRESSED CENTRE GRINDING
SPECIFICATION
PART NO.
LIST PRICE
42 Depressed Centre Cutting - (4”) 100 x 2.5 x 16.0 42 Depressed Centre Cutting - (4½”) 115 x 2.5 x 22.2 42 Depressed Centre Cutting - (5”) 125 x 2.5 x 22.2 42 Depressed Centre Cutting - (7”) 180 x 3.0 x 22.2
27 Depressed Centre Grinding - (4”) 100 x 6.0 x 16.0 27 Depressed Centre Grinding - (4½”) 115 x 6.0 x 22.2 27 Depressed Centre Grinding - (5”) 125 x 6.0 x 22.2 27 Depressed Centre Grinding - (7”) 180 x 6.0 x 22.2 27 Depressed Centre Grinding - (9”) 230 x 6.0 x 22.2
A30BF Inox Duo A30BF Inox Duo A30BF Inox Duo A30BF Inox Duo A30BF Inox Duo
D100-16-ADMI-6.0 D115-22.2-ADMI-6.0 D125-22.2-ADMI-6.0 D180-22.2-ADMI-6.0 D230-22.2-ADMI-6.0
ORDER LINE: 01909 552470
£1.02 £1.10 £1.19 £2.14 £2.81
BRAND
BRAND
CUT OFF/GRIND:
80m/s
STELL 41H FLAT CUTTING
SPECIFICATION
PART NO.
LIST PRICE
41H Flat Cutting - (12”) 300 x 3.5 x 20.0 41H Flat Cutting - (12”) 300 x 3.5 x 22.2
A30BF A30BF
F300-20.0-ADM-3.5 F300-22.2-ADM-3.5
£2.86 £2.86
STEEL & INOX 41 FLAT CUTTING
SPECIFICATION
PART NO.
LIST PRICE
41 Flat Cutting - (12”) 300 x 2.5 x 25.4 41 Flat Cutting - (14”) 350 x 2.8 x 25.4
A46BF Inox Duo A46BF Inox Duo
F300-25.4-ADMI-2.5 F350-25.4-ADMI-2.8
£3.24 £3.88
ORDER LINE: 01909 552470
ABRASIVE DISCS STONE 74
ABRASIVE DISC: SHAPE:
41 & 41H FLAT CUTTING
FLAT 2
LAYERS OF REINFORCING: GRIT TYPE:
SILICON CARBIDE
MAX SPEED:
80m/s
CUT OFF/GRIND:
ABRASIVE WHEEL: SHAPE:
CUT OFF
27 D.C GRINDING
APPLICATIONS:
All types of masonry and concrete.
BOX QUANTITY = 25pcs (300mm = 10)
STONE A range of high performance grinding discs for angle grinders.
3
LAYERS OF REINFORCING: GRIT TYPE:
SILICON CARBIDE
MAX SPEED:
80m/s GRIND
APPLICATIONS:
All types of masonry and concrete.
BOX QUANTITY = 10pcs
BRAND
STONE A range of high performance cutting discs for angle grinders and 12” petrol and electric cut-off machines.
DESCRIPTION:
DEPRESSED CENTRE
CUT OFF/GRIND:
DESCRIPTION:
STONE 41 & 41H FLAT CUTTING
41 Flat Cutting - (4”) 100 x 2.5 x 16.0 41 Flat Cutting - (4½”) 115 x 2.5 x 22.2 41 Flat Cutting - (5”) 125 x 2.5 x 22.2 41 Flat Cutting - (7”) 180 x 3.0 x 22.2 41 Flat Cutting - (9”) 230 x 3.0 x 22.2 41H Flat Cutting - (12”) 300 x 3.5 x 20.0 41H Flat Cutting - (12”) 300 x 3.5 x 22.2
STONE 27 DEPRESSED CENTRE GRINDING 27 Depressed Centre Grinding - (4”) 100 x 6.0 x 16.0 27 Depressed Centre Grinding - (4½”) 115 x 6.0 x 22.2 27 Depressed Centre Grinding - (5”) 125 x 6.0 x 22.2
SPECIFICATION
PART NO.
LIST PRICE
C30BF C30BF C30BF C30BF C30BF C30BF C30BF
F100-16-ADS-2.5 F115-22.2-ADS-2.5 F125-22.2-ADS-2.5 F180-22.2-ADS-3.0 F230-22.2-ADS-3.0 F300-20.0-ADS-3.5 F300-22.2-ADS-3.5
£0.84 £0.90 £1.00 £1.38 £1.71 £3.02 £3.02
SPECIFICATION
PART NO.
LIST PRICE
C30BF C30BF C30BF
D100-16-ADS-6.0 D115-22.2-ADS-6.0 D125-22.2-ADS-6.0
£1.06 £1.16 £1.29
ORDER LINE: 01909 552470
MERCHANDISING DURO SUPPORT TECHNICAL INFORMATION TERMS & CONDITIONS
MERCHANDISING & P.O.S
MERCHANDISING & P.O.S
DURO can provide a complete merchandising or point of sale solution for every showroom environment, regardless of space availability or restriction.
DURO have developed a fully modular point of sale system that can cater for all product types. These units can be free standing, wall mounted or part of a tool wall system - offering the distributor a full list of options.
FLOOR STANDING / COUNTER TOP / WALL MOUNTED
RANGE & PRODUCT CARDS / LITERATURE / POSTERS
CORE DRILL LECTERNS FULL SIZE TOOL BARS
DURO can supply product range cards, posters, individual product cards, application charts, literature, product videos and much more to further enhance the appearance of our merchandising units, and more importantly provide the customer with more detailed and informative product, application and performance recommendations.
FREESTANDING / COUNTER TOP OR WALL MOUNTED UNITS
DURO also offer tool wall components that enable distributors to utilise available in store space with as much product as possible. Angled hooks for blades, modular unit hanging shelves and many other options are available. Contact your area sales manager to discuss the possibilities further.
DURO SUPPORT
VALUE ADDED SERVICES 78
DURO SUPPORT is a range of value added services to help you grow your business.
DURO SUPPORT VALUE ADDED SERVICES
DURO SUPPORT aims to increase your sales and profits by using close working relationships with the entire DURO team.
IMAGE DATABASE ACCESS
WEBSITE SUPPORT
DURO SUPPORT gives you access to a comprehensive library of 100’s of action, still and application imagery for DURO products. Use for printing, web enhancement or internal communication. All file variations are available to help you promote DURO products.
DURO SUPPORT can support the building and successful operation of your own website. Web ready images and videos are available as well as full product specifications, descriptions and optimisation techniques for e-commerce sites.
PRODUCT ACTION CLIPS
TECHNICAL SUPPORT DURO SUPPORT is built from the knowledge gained by the DURO sales teams’ wealth of experience within the diamond and carbide drilling & cutting market. Technical specification of products, cross referencing of materials and user guidelines are all available as well as a support team to communicate with.
DURO SUPPORT gives you access to an ever growing video database of DURO products in use. Whether required for instore promotion, demonstrations or training. New application clips can be taken when required.
IN-HOUSE DESIGN* DURO SUPPORT has an in-house design and marketing team, that works in tandem with the DURO sales team. The facilities of this department are available to DURO customers to help develop their own specific sales opportunities.
PRODUCT TRAINING DURO SUPPORT gives you access to our sales force and your local representatives. Full product training can be given on all DURO products and their abilities to enable you to best sell through the DURO range. Technical support documents are also freely available.
*CONDITIONS APPLY
LITERATURE FORMATTING
LOGISTICAL SUPPORT
DURO SUPPORT gives you access to all DURO product and corporate literature. Available in a wide range of formats - use for e-mail, mailshots to your customers or websites downloads. Each file can be referenced to your company. Pdf/jpeg/mail ready.
DURO SUPPORT is dedicated to fully supporting its customers with high levels of stocks and market leading deliveries. Investment throughout the DURO logistics departments ensure the highest levels of service to all DURO customers.
TAILORED LITERATURE* DURO SUPPORT gives you the ability to tailor DURO literature to promote your own company. Inclusion of your company details -contact, logos and website can be added. Print ready or electronic files can be supplied very quickly and easily. *CONDITIONS APPLY
Please speak to your DURO sales representative to discover how to get the most from DURO SUPPORT.
79
APPLICATION CHART DIAMOND BLADES 80
81
IMPORTANT USAGE INFORMATION On these pages and the one following you will find product application guides, a convertor for cross referring blade speeds from m/s to rpm and vice versa, and a guide to recommended speed settings when using core drills. For further assistance on any technical aspect please contact your DURO representative.
VACUUM BRAZED / TILE CUTTING / CURVEX
UNIVERSAL CONCRETE & BUILDING MATERIALS
CONSTRUCTION MATERIALS
ASPHALT & ABRASIVE MATERIALS
MULTIPLE APPLICATIONS - CONSTRUCTION
MULTIPLE APPLICATIONS - CIVIL ENG.
MORTAR RAKING
SPECIAL APP’S
18 18 13 13 13 36 14 14 14 15 15 15 16 16 16 24 24 24 28 28
Hard & Dense Soft & Abrasive
Glass / Reinforced Plastic Polyurethane Fibreglass Marble - Dry Cutting Steel Bars, Pipe & Sections SG & Grey Iron Porcelain & Hard Tiles Ceramic Tiles Indian Stone Granite Slate Class A Engineering Bricks Clay Paviors / Pipes / Tiles Flint Aggregate Product Class B Engineering Bricks Heavily Reinforced Concrete Medium Reinforced Concrete Lightly Reinforced Concrete Concrete Hard York Stone Quartzite London Brick Hard Concrete Products Kerbs / Lintels / Beams Cast Pipes Bricks / Concrete Flags Hand Made Bricks Facing Bricks Concrete Roof Tiles Soft Concrete Paviors Sand Based Paviors Green Concrete Cement Screed Lightweight Concrete Block Hot Rolled Asphalt Abrasive Sand / Gritstone Asphalt Over Concrete Asphalt Abrasive Mortar Highly suited
Suitable with reservations
DUU/C LOOP
DU-RING DSM DM DPM DA/C DPA/C DUA/C DCM-T DPCM-T
DUM-S DA DPA
DUA DPCNG DCM DPCM DUSCM
DUCM-SILENT
26 54 54 40 11 28 11 28 12 12 12 12
SILENT BLADES
DUA/C-SILENT
DSBM DU/C DPU/C DUU/C DPHB DPH DUHB
DUH
DU-CURVEX
Catalogue Page No.
DPT
Material
DUT DPVB
Specification of Blade
HARD MATERIALS
Highly suited
Suitable with reservations
TECHNICAL INFORMATION
BLADE SPEEDS / CORE DRILL APPLICATIONS & SPEEDS 82
ø
16
20
25
32
100 115 125 150 175 180 200 225 230 250 300 350 400 450 500 600
3,050 2,650 2,440 2,030 1,740 1,690 1,520 1,350
3,810 3,320 3,050 2,540 2,180 2,120 1,900
4,770 4,150 3,810 3,180 2,720 2,650 2,380 2,120 2,070 1,900 1,590 1,360 1,190 1,060 950 790
6,110 5,310 4,880 4,070 3,490 3,390 3,050 2,710 2,650 2,440 2,030 1,740 1,520 1,350 1,220 1,010
1,320 1,220 1,010 870 760 670 610 500
1,690 1,660 1,520 1,270 1,090 950 840 760 630
Metres per second (m/s) 35 40 50 6,680 5,810 5,340 4,450 3,810 3,710 3,340 2,970 2,900 2,670 2,220 1,900 1,670 1,480 1,330 1,110
7,630 6,640 6,110 5,090 4,360 4,240 3,810 3,390 3,320 3.050 2,540 2,180 1,900 1,690 1,520 1,270
9,540 8,300 7,630 6,360 5,450 5,300 4,770 4,240 4,150 3,810 3,180 2,720 2,380 2,120 1,900 1,590
63
80
100
125
12,000 10,400 9,620 8,020 6,870 6,680 6,010 5,340 5,230 4,810 4,010 3,430 3,000 2,670 2,400 2,000
15,200 13,200 12,200 10,100 8,730 8,480 7,630 6,790 6,640 6,110 5,090 4,360 3,810 3,390 3.050 2,540
19,000 16,600 15,200 12,700 10,900 10,600 9,540 8,480 8,300 7,630 6,360 5,450 4,770 4,240 3,810 3,180
23,800 20,700 19,000 15,900 13,600 13,200 11,900 10,600 10,300 9,540 7,950 6,820 5,960 5,300 4,770 3,970
WET & DRY DIAMOND CORE APPLICATIONS CORE SPECIFICATION
Hardness Material
Hard & Dense
DSDC (dry)
DDC (dry)
DPDC (dry)
DPWC (wet)
Class A engineering bricks
Flint aggregate common Class B engineering bricks Lightly reinforced concrete Concrete Hard York Stone London Brick General House Brick Handmade bricks Lightweight concrete block Abrasive sand / grit stone
Suitable with reservations
DRY CORE SPEED RECOMMENDATIONS CORE SIZE 22mm 28mm 32mm 38mm 42mm 48mm 52mm 65mm 78mm 102mm 107mm 117mm 127mm 152mm 158mm RPM
Additionally many DURO products are approved by oSa (Organisation for the Safety of Abrasives). Where a standard doesn’t exist for one of our innovative products, DURO self certify through the GPSD (General Product Safety Directive). DURO tools are produced using only the highest quality raw materials available. Debeers (Element Six) and GE synthetic diamond grits, high grade carbon steels, fine metal powders and top grade abrasive grains are all used to create the perfect tools. We mark and package our products in line with current legislation to provide the maximum amount of safety, application and user information possible. All DURO tools are 100% guaranteed against a genuine manufacturing defect. If you are unhappy with any DURO tools, please return the product to us stating the reason for the return and we will investigate fully and respond accordingly.
www. duro- diamonds. com
Breeze block
Highly suited
The EN mark on our products signifies that it has passed tough quality inspection and been tested rigorously prior to delivery.
You can download material and speed recommendation charts from our new website:
Facing bricks
Soft & Abrasive
83 DURO works hard to ensure the safety of its ultimate end users through close co-operation with its partner producers. As a result all DURO tools comply with the relevant European safety standards appropriate to the product.
BLADE SPEED RECOMMENDATIONS mm
TECHNICAL INFORMATION
• Speed may be adjusted to suit site conditions. • For very abrasive materials an increase in drill speed (rpm) will prolong life. • For harder materials, decrease the drill speed to prevent overheating. • Machine and material are the controlling factors to the life and speed of the core. • Ultimately, machine and operator determine the overall performance.
380 440 520 570 625 750 860 1030 1280 1400 1600 1760 1900 2380 3000
TECHNICAL SUPPORT PRODUCT TRAINING
ACCESS OUR INDUSTRY KNOWLEDGE BASE
HINTS AND TIPS FOR THE BEST USE OF DURO PRODUCTS
www. duro- diamonds. com PRODUCT DEMONSTRATION VIDEOS, PRODUCT ALTERNATIVES AND ASSOCIATED PRODUCTS
TERMS & CONDITIONS
PRODUCT IDENTIFICATION LABELLING & PRODUCT ETCHING
84
PRODUCT APPROVED BY ORGANISATION FOR THE SAFETY OF ABRASIVES
Conditions of Sale – DURO UK Limited 1. Definitions 1.1 “Buyer” means the person who buys or agrees to buy the goods from the seller 1.2 “Conditions” means the terms and conditions of sale set out in this document and any special terms and conditions agreed in writing by the seller 1.3 “Delivery date” means the date specified by the seller when the goods are to be delivered 1.4 “Goods” means the articles which the buyer agrees to buy from the seller 1.5 “Price” means the price for the goods excluding carriage, packing, insurance and VAT 1.6 “Seller” means DURO UK Limited of Sheffield in the county of South Yorkshire. 2. Conditions Applicable 2.1 These conditions shall apply to all contracts for the sale of goods by the seller to the buyer to the exclusion of all other terms and conditions including any terms of purchase or similar documentation supplied by the buyer at point of order. 2.2 All orders for goods shall be deemed to be an offer by the buyer to purchase goods pursuant to these terms. 2.3 Acceptance of delivery of goods shall be deemed conclusive evidence of the buyer’s acceptance of these conditions. 3. Price & Payment 3.1 The price shall be the sellers quoted price. The price is exclusive of VAT at the current rate. 3.2 Payment of the price and VAT shall be due and payable on the date shown on the invoice. Time for payment shall be of the essence. 3.3 If the buyer is a partnership, and fails to pay the price in accordance with the seller’s terms as noted by the date specified on the invoice, the partners shall be jointly and severally liable to pay to the seller any unpaid invoices addressed to the buyer. Any demand for payment by the seller to any one or more of the partners of the buyer, shall be deemed to be a demand made to all such persons as are jointly and severally liable upon the default of the buyer. The seller shall be at liberty to release or discharge from liability any one or more of the partners of the buyer, or to compound with, accept compositions from or make any other arrangements with any of the partners, without in consequence releasing or discharging any other party which is subject to the seller’s conditions, or otherwise prejudicing or affecting the seller’s rights and remedies against such party. 4. The Goods 4.1 The quantity and description of the goods shall be as set out in the seller’s quotation. 5. Warranties and liability 5.1 The seller warrants that the goods will at the time of delivery correspond to the description given by the seller.
MAX SPEED IN RPM
PLEASE CONTACT
BRAND NAME/ PERFORMANCE LEVEL MACHINE USE PICTOGRAM DIRECTION OF ROTATION
BLADE DIMENSIONS & MAXIMUM WORKING SPEED
USE & SAFETY PICTOGRAMS
BAR CODE
DURO SPECIFICATION ASPHALT
MATERIAL APPLICATION
EUROPEAN MANUFACTURING STANDARD
DURO ISO CERTIFICATION PRODUCT APPROVED BY ORGANISATION FOR THE SAFETY OF ABRASIVES
BRAND NAME/ PERFORMANCE LEVEL
DIRECTION OF ROTATION UNIQUE SERIAL NUMBER USAGE HINTS DIMENSIONS
TERMS & CONDITIONS OF SALE
MATERIAL APPLICATION DURO SPECIFICATION
5.2 It is the responsibility of the of the buyer to return any faulty goods sufficiently packaged so as to avoid damage in transit, along with the original documentation to the seller’s address shown in clause 1.6 above. No refund will be issued until the goods are received as aforesaid. 5.3 In the event that upon inspection or testing the returned goods are found to be free of any faults, the seller may refuse to issue a full refund or make a reasonable charge for time spent 6. Delivery of Goods 6.1 Delivery of goods shall be made to the buyer’s address or as instructed by the buyer on the delivery date. The buyer shall make all arrangements to accept delivery of the goods whenever they are tendered for delivery. 6.2 While the seller will endeavour to deliver the goods by any date or within any period agreed upon, such dates and periods are only estimates given in good faith and the seller will not be liable for any failure to deliver by such a date or within such a period. The seller will also not be liable for any costs arising from such failure. 7. Acceptance of Goods 7.1 The buyer shall be deemed to have accepted goods 48 hours after delivery to the buyer. 7.2 After acceptance the buyer shall not be entitled to reject goods, which are not in accordance with the contract. 8. Title and Risk 8.1 The goods shall remain the property of the seller until: 8.1.1 The buyer has paid for the goods in full including VAT at the current rate. 8.1.2 No other sums whatever shall be due from the buyer to the seller. 8.2 The goods shall be at the buyers risk as from delivery. 8.3 Until title of the goods passes to the buyer in accordance with clause 8.1, the buyer shall hold the goods and each of them on a fiduciary basis as bailee for the seller. The buyer shall store the goods (at no cost to the seller) separately from all other goods in its possession and marked in such a way that they are clearly identifiable as the seller’s property. 8.4 Not withstanding that the goods (or any of them) remain the property of the seller, the buyer may sell or use the goods in the course of the buyers ordinary business at full market value for the account of the seller. Any such sale or dealing shall be a sale or use of the seller’s property by the buyer on the buyer’s own behalf and the buyer shall act as principal whilst making such sales or dealings. Until property of the goods passes to the buyer the entire proceeds of sale or otherwise of the goods shall be held in trust for the seller and shall not be mixed with any other money or paid into any overdrawn bank account and shall be at all material times identified as the sellers money. 8.5 The seller shall be entitled to recover the price including VAT not withstanding that the property in any of the goods has passed from the seller. 8.6 Until such time as the property of the goods transfers to the buyer from the seller, the buyer shall upon request deliver such goods as have not
85
ceased to be in existence or resold to the seller. If the buyer fails to do so the seller may enter upon any premises owned occupied or controlled by the buyer where the goods are situated and repossess the goods. On the making of such a request the rights of the buyer under clause 8.4 shall cease. 8.7 The buyer shall not pledge or in any way charge by way of security for any indebtedness any of the goods, which are the property of the seller. Without prejudice to the other rights of the seller, if the buyer does so all sums whatever owing by the buyer to the seller shall forthwith become due and payable. 8.8 The buyer shall insure and keep insured the goods to the full price against “all risks” to the reasonable satisfaction of the seller until the date that the property of the goods passes to the buyer and shall whenever requested by the seller produce a copy of the policy of insurance. Without prejudice to the other rights of the seller, if the buyer fails to do so all sums whatever owing by the buyer to the seller shall forthwith become due and payable. 8.9 The buyer shall promptly deliver the prescribed particulars of this contract to the registrar in accordance of the companies act 1985 part XII as amended. Without prejudice to the other rights of the seller, if the buyer fails to do so all sums whatever owing by the buyer to the seller shall forthwith become due and payable. 9. Remedies of Buyer 9.1 Where the buyer rejects any goods then the buyer shall have no further rights whatever in respect of the supply to the buyer of such goods or the failure by the seller to supply goods which conform to the contract of sale. 9.2 Where the buyer accepts or is deemed to have accepted any goods then the seller shall have no liability whatever to the buyer in respect of those goods. 9.3 The seller shall not be liable to the buyer for late delivery or short delivery of the goods. The provisions of this clause shall apply to rights claims or liability arising directly, consequently or otherwise. 10. Proper Contract of Law 10.1 This contract is subject to the law of England and Wales. 11. Order Value and Carriage Terms • A minimum order value of £50.00 applies to all orders. • Every effort will be made to despatch orders received before 4.00pm, on the same day, although this cannot be guaranteed. • Standard transportation will be NEXT WORKING DAY (free on orders over £150.00 net, £9.00 under £150.00 net) • Alternative transportation services are available on all orders as detailed below: º NEXT WORKING DAY before 10.30a.m. - £17.00 (£8.00 for orders over £150.00 net) º NEXT WORKING DAY before 12.00p.m. - £12.00 (£6.00 for orders over £150.00 net) º NEXT DAY Saturday delivery before 12.00p.m. - £34.00 (£25.00 for orders over £150.00 net) º Minimum carriage paid order value for NorthernIrelandis£250.00net.Transportis minimum 2 days. º Certain UK postcodes will require 2 day delivery. Please discuss on placement of order.
YOUR DISCOUNT FROM LIST:
SAFETY PICTOGRAMS
EUROPEAN MANUFACTURING STANDARD NOVEMBER 2012
DURO UK LTD / LOW COMMON ROAD / BROOKLANDS PARK INDUSTRIAL ESTATE / DINNINGTON / SHEFFIELD / S25 2RJ
DURO EUROPE nv/sa / NIJVERHEIDSSTRAAT 20 / B-2160 WOMMELGEM / BELGIUM
T: 01909 552470 F: 01909 552472 E: info@duro-diamonds.co.uk
T: +32 (0)3 355 4140 F: +32 (0)3 355 4149 E: info@duro-diamonds.be
www.duro-diamonds.com