INSTRUCTIONS FOR USE FOOD GRADE DIAPHRAGM PUMP
DPP-30
Congratulations on your purchase of this world class premium construction Food grade diaphragm pump
Hose Clamps
Lever Handle Pump Body
Delivery Nozzle
Suction / Discharge Hose
Pump Body
Piece Count: 1. Pump Body 2. Suction & Discharge Hose (1” I.D. x 4 metre) 3. Delivery Nozzle 4. Stainless Steel Hose Clamps (3) Features: 1. Food Grade pump , manufactured from approved materials for use with liquid food stuffs making the pump useful for applications in agriculture , preserving , wine making & food oil production 2. Hand Operated Diaphragm Pump designed to work in any position- Vertical, Horizontal, Upside Down etc. 3. 2 Way Operation: Pumping direction can be reversed by simply reversing the suction & delivery pipes 4. Repositionable pump handle makes installation very easy 5. Dispenses 4.40 gallons per minute (16.6 litres per minute) 6. Temperature range : -10° C to +40° C ( 14°F to 104°F) WETTED COMPONENTS: Food Grade Polyacetal, Food Grade Thermoplastic Polyurethane & Food Grade PVC
ASSEMBLY & OPERATION: 1. Remove the Pump Body from the pack. Pump Body has 4 mounting holes. Mount the body using these holes & screws. The body can be mounted in any direction, upside down, vertically, horizontally etc. 2. Top of the Pump Body has the Lever mechanism. Position of the lever handle can be changed, depending where the pump is mounted. The lever mechanism is fitted onto the body by means of a bayonet connection. Turning it anti-clockwise will open the connection. Adjust handle position , fit it back & lock by turning in the clockwise direction 3. The Pump body has 2 ports, clearly marked as IN & OUT. Cut the hose supplied in 2 parts, one for the suction end & the other for discharge. Slide the Suction & Discharge hoses onto these ports & tighten using hose clamps 4. Connect the other end of the Discharge Hose with the Delivery Nozzle using hose clamps 5. The pump is now ready for use 6. By simply moving the lever handle up & down, pumping will start in a few strokes. Effort required to pump varies & is based on the media being pump. Pump is ideally designed for use with low viscosity media. If used with thick media , effort required will increase 7. After pumping is completed, it is a good practice to open the pump & clean using water. Pump can be opened by simply turning the lever handle in anti clockwise direction RECOMMENDED FOR USE WITH: Aqueous Foods Acidic Foods with a pH <5 Water Cider Fruit or Vegetable Juices Lemonades , Sodas , Syrups , Bitters Coffee , Tea Liquid Chocolate Beer , Wine , Brandy , Liqueurs Vegetable Oils Milk : whole , semi skimmed or skimmed Vinegar COMPLIANCE STATEMENT The pump is manufactured in accordance with the best industry practices & is suitable for contact with food products, according to the migration test results, on the basis of the requirements established by the Standards and Directives indicated below: Ministerial Decree of 21/03/73 and successive updates, acknowledgements of the European Directives, 82/711/EEC, 85/572/ EEC, 89/109/ EEC, 93/8/ EEC, 97/48/EC, 2001/61/EC e 2002/72/EC, regarding plastic materials and objects destined for contact with food products, in the following terms: Pump is suitable for contact with foods for which the use of the food simulants “A” (aqueous foods), “B” (acidic foods having a pH < 4.5/5), “C” (foods with a maximum ethanol content of 15%) and “D” (fatty foods) is prescribed. The hose supplied with the pump with accessories is suitable for contact with foods for which the use of the food simulants “A”, “B” and “C” is prescribed. The hose supplied with accessories IS NOT SUITABLE for contact with foods for which the use of the food simulant “D” (fatty foods) is prescribed. Consequently ,in the case of use of such products (fats) it is necessary to obtain and fit a hose that complies with the relative legislative prescriptions. S1370, Rev A