INSTRUCTION MANUAL
S1620
Drum Cradle DRC-133
Handle
Resting Pad-1 (with slot)
Resting Pad-2
Stopper Frame-1 Cross Leaf
Frame-2
Plate
Supporting Rod
JUST TIP
Axle
Swivel Wheel Rigid Wheel
CONSTITUENTS
QUANTITY
Frame
2
Resting Pad
2
Plate
1
Swivel Wheel
2
Axle
1
Rigid Wheel
2
Supporting Rod
1
Cross Leaf
2
Handle
1
Nut & Bolt small
9
Nut & Bolt medium
12
Bolt large
2
Washer small & large
44
TILT
... AND DRAIN
ASSEMBLY & INSTALLATION Step 5 Secure Resting Pad 1 & 2 between the 2 Frames using nuts & bolts (medium). Make sure that Resting Pad 1 with slot goes at the top of the Cradle
Step 1 Attach the 2 Swivel Wheels onto the Plate using 4 nut bolts (small) on each side of the Plate
Step 2 Attach the Plate between the 2 Frames (Frame 1 & 2) using 2 nut bolts (medium) on each side. Make sure that the 2 Frame Stoppers point towards each other
Step 3 Insert the 2 Rigid Wheels into Axle, one on each side. Now place the Axle between the 2 Frames by pulling the Frames outwards, and placing the Axle into the slot provided
Stopper
Resting Pad-1 (with slot)
Step 6 Attach Cross Leaf onto the Frame top using 5 nuts & bolts (1 small for the center and 4 medium for the sides).
Nut Bolt
Step 7 Insert Handle into slot to pick up drum
Axle
Step 4 Attach the Supporting Rod between the Frames using 2 large Bolts provided Supporting Rod
Handle
Slot