Fluid Handling W
NE
equipment
NPLC-02 May 2011
1 Mechanical Oil Meters OM-10
Specifications
Product Features
• • • • •
High pressure positive displacement meter suitable for in-line and end of line applications Oval gear mechanism for optimum accuracy High reliability Mechanical Display Robust Aluminum Die Cast construction with protective shroud on meter Available in Litres / Quarts version
RECOMMENDED USE Oils with viscosity upto 2000 cSt, Diesel, Biodiesel
Flow rate
1 to 30 LPM (0.3 to 8 GPM)
Accuracy
+ / - 1%
Repeatability
+ / - 0.20%
Max. Working Pressure
1000 PSI (70 BAR)
Burst Pressure
3000 PSI (210 BAR)
Pressure Loss
10 PSI (0.7 BAR)
Working Temperature range
-10°C to 60°C (14°F to 140°F)
Max. Resettable Batch Total
999.9 Litres or Quarts
Max. Non Resettable Totalizer
9,99,999 Litres or Quarts
Least Count /Resolution
0.10 Litres or Quarts
Water Resistance
IP55
DO NOT USE WITH Water based media, Gasoline etc. WETTED COMPONENTS Aluminum, Stainless Steel, Nitrile Rubber & POM
Oval Gear Mechanism
1 to 30 LPM (0.3 to 8 GPM)
Working Temperature Range -10°C to 60°C (14°F to 140°F)
CAT NR.
ORDERING #
MEASUREMENT
THREADS
OM-10/1-2/BSP
45790
Litres
1/2" BSP (F)
OM-10Q/1-2/N
45791
Quarts
1/2" NPT (F)
Note: Not to be used to measure media for resale 2
FLOW RATE
Maximum Working Pressure 1,000 PSI (70 BAR)
2 Electronic Oil Meters OM-20
Specifications
Product Features
• • • • • •
High pressure positive displacement meter suitable for in-line and end of line applications Oval gear mechanism for optimum accuracy Electronic Display using two 1.5V batteries Robust Aluminum Die Cast construction Measures in Litres, Quarts, Pints & Gallons Easy user re-calibration
RECOMMENDED USE Oils with viscosity upto 5000 cSt, Diesel, Biodiesel
Flow rate
1 to 30 LPM (0.3 to 8 GPM)
Accuracy
+ / - 0.50%
Repeatability
+ / - 0.30%
Max. Working Pressure
1000 PSI (70 BAR)
Burst Pressure
2000 PSI (140 BAR)
Pressure Loss
10 PSI (0.7 BAR)
Working Temperature range
-10°C to 60°C (14°F to 140°F)
Max. Resettable Batch Total
99,999 units
Max. Non Resettable Totalizer
9,99,999 units
Least Count /Resolution
0.001 units
Water Resistance
IP55
DO NOT USE WITH Water based media, Gasoline etc. WETTED COMPONENTS Aluminum, Stainless Steel, Nitrile Rubber & POM
FLOW RATE 1 to 30 LPM (0.3 to 8 GPM)
Oval Gear Mechanism
Working Temperature Range -10°C to 60°C (14°F to 140°F)
CAT NR.
ORDERING #
THREADS
OM-20/1-2/BSP
45795
1/2" BSP (F)
OM-20/1-2/N
45796
1/2" NPT (F)
Maximum Working Pressure 1,000 PSI (70 BAR)
Note: Not to be used to measure media for resale 3
3
Oil Control Guns OGY
Oil Gun with Steel Extension
Product Features
Oil Gun with Steel Extension & Manual Non Drip Nozzle Oil Gun with Hose & Manual Non Drip Nozzle
• • •
• • • •
Specifications
For use with Air Operated Oil Pumps upto 6:1 Pressure ratio Gun dispenses by simple press of the trigger Built-in safety cum continuous Flow lever can be slid over the trigger for continuous un-attended dispensing; or alternatively under the trigger to lock & prevent accidental dispensing Slim construction of the steel outlet spout allows the gun to be used to fill small openings Built-in swivel threaded at inlet for easy maneuverability Standard configuration includes steel outlet extension & available as Gun Only or Gun with manual non drip nozzle Also available gun fitted with hose and manual non drip nozzle
In-Line Swivel
½” (F)
Outlet Diameter of Steel Spout
½” (12.7 mm)
Inside Diameter of Hose Extension
½” (12.7 mm)
Max. Inlet Pressure
870 PSI (60 BAR)
Max. Flow rate
70 LPM (18.5 GPM)
Working Temperature Range
-10°C to 60°C (14°F to 140°F)
FLOW RATE
RECOMMENDED USE Oil, Gear Lube, ATF
Upto 70 LPM (18.5 GPM)
DO NOT USE WITH Water based media, Gasoline etc.
Maximum Pressure 870 PSI (60 BAR) Working Temperature Range -10°C to 60°C (14°F to 140°F)
WETTED COMPONENTS Steel, Nylon, Stainless Steel, Viton, Nitrile Rubber* * on models with hose/non drip nozzle
CAT NR.
ORDERING #
With Steel Extension
CAT NR.
ORDERING #
INLET THREADS
With Hose Extension
Gun Only OGY/S/1-2R/B
45715
1/2" BSPT (F)
OGY/S/1-2R/N
45716
1/2" NPT (F)
Gun with Manual Non Drip Nozzle
4
OGY/SM/1-2R/B
45717
OGY/SM/1-2F/B
45730
1/2" BSPT (F)
OGY/SM/1-2R/N
45718
OGY/SM/1-2F/N
45731
1/2" NPT (F)
4
Automatic Non Drip Nozzle
Oil Control Gun Accessories
Manual Non Drip Nozzle
Oil Gun Hose Extension
Non Drip Nozzles
Oil Gun Hose Extension
•
•
• • •
Commonly used with oil control valves / hose end guns Used either with steel extensions or hoses at discharge end to cut off media supply, once the filling is complete Steel construction with nitrile rubber gears Available in 2 models
• • • •
Flexible Oil Hose Extension for use with Oil Control Guns Max. Working Pressure 2,320 PSI (160 BAR) Overall Length 8” (200 mm) Hose Inner Dia. 1/2” (12. 7 mm) Fittings:1/2” (M) x 1/4” (M)
Automatic Non Drip Nozzle: Designed with multiple check valves to achieve absolute non drip. The nozzle opens automatically under fluid pressure; and closes automatically with the release of pressure. The discharge end has a narrow section allowing the nozzle to dispense into small openings Manual Non Drip Nozzle: Can be operated by manually rotating the body. Both opening & closing of the nozzle are manual. These provide minimal pressure drop and are ideal for high flow applications
CAT NR.
ORDERING #
Oil Control Gun fitted with automatic non drip nozzle
TIP DIAMETER
Oil Control Gun fitted with hose extension
Maximum Pressure 2,320 PSI (160 BAR)
INLET THREADS
Automatic Non Drip Nozzle NDN/02/1-4F/B
45010
NDN/02/1/4F/N
45012
5/8” (16 mm)
1/4” BSPT (F) 1/4” NPT (F)
CAT NR.
ORDERING #
1/4” BSPT (F)
SA/HOS/OGY/BSP
1/4” NPT (F)
SA/HOS/OGY/N
Manual Non Drip Nozzle NDN/26/1-4F/B NDN/26/1-4F/N
45035 45034
0.59” (15 mm)
THREAD 1
THREAD 2
43895
½” BSP (M)
¼” BSPT (M)
43896
½” NPT (M)
¼” NPT (M) 5
5
Mechanical Oil Control Guns OM10-OGY
Product Features With Steel Extension
With Hose Extension
Specifications • • • • • •
• • •
High accuracy light weight gun for controlling fluid deliveries in most demanding applications Oval gear mechanism for optimum accuracy High Reliability Mechanical display Aluminum Die cast meter body Gun with Impact & Weather resistant nylon construction Built-in safety cum continuous Flow lever can be slid over the trigger for continuous un-attended dispensing; or alternatively under the trigger to lock & prevent accidental dispensing Built In swivel at inlet for easy maneuverability Available in Litres / Quarts version Supplied complete with rigid steel or hose extension, fitted with manual non drip nozzle
Flow rate
1 to 30 LPM (0.3 to 8 GPM)
Accuracy
+ / - 1%
Repeatability
+ / - 0.20%
Max. Working Pressure
870 PSI (60 BAR)
Working Temperature range
-10°C to 60°C (14°F to 140°F)
Max. Resettable Batch Total
999.9 Litres or Quarts
Max. Non Resettable Totalizer
9,99,999 Litres or Quarts
Least Count /Resolution
0.10 Litres or Quarts
Water Resistance
IP55
RECOMMENDED USE Oils with viscosity upto 2000 cSt, Diesel, Biodiesel Working Temperature Range -10°C to 60°C (14°F to 140°F)
DO NOT USE WITH Water based media, Gasoline etc. WETTED COMPONENTS Aluminum, Stainless Steel, Steel, Nylon, Viton, Nitrile Rubber & POM
Oval Gear Mechanism
FLOW RATE
Maximum Working Pressure 870 PSI (60 BAR)
1 to 30 LPM (0.3 to 8 GPM)
CAT NR.
ORDERING #
With Steel Extension
6
CAT NR.
ORDERING #
MEASUREMENT
INLET THREADS
OM-10/OGY/FM/B
45751
Litres
1/2" BSPT (F)
With Hose Extension
OM-10/OGY/RM/B
45741
OM-10/OGY/RM/N
45746
OM-10/OGY/FM/N
45756
Litres
1/2" NPT (F)
OM-10Q/OGY/RM/N
45761
OM-10Q/OGY/FM/N
45766
Quarts
1/2" NPT (F)
6
Electronic Oil Control Guns OM20-OGY
Product Features With Steel Extension
• • • • • •
• • • •
High accuracy light weight gun for controlling fluid deliveries in most demanding applications Oval gear mechanism for optimum accuracy Electronic Display using two 1.5V batteries Aluminum Die cast meter body Gun with Impact & Weather resistant nylon construction Built-in safety cum continuous Flow lever can be slid over the trigger for continuous unattended dispensing; or alternatively under the trigger to lock & prevent accidental dispensing Built In swivel at inlet for easy maneuverability Measures in Litres, Quarts, Pints & Gallons Easy user re calibration Supplied complete with rigid steel extension or hose extension, fitted with manual non drip nozzle
With Hose Extension
Specifications Flow rate
1 to 30 LPM (0.3 to 8 GPM)
Accuracy
+ / - 0.50%
Repeatability
+ / - 0.30%
Max. Working Pressure
870 PSI (60 BAR)
Working Temperature range
-10°C to 60°C (14°F to 140°F)
Max. Resettable Batch Total
99,999 units
Max. Non Resettable Totalizer
9,99,999 units
Least Count /Resolution
0.001 units
Water Resistance
IP55
RECOMMENDED USE Oils with viscosity upto 5000 cSt, Diesel, Biodiesel DO NOT USE WITH Water based media, Gasoline etc.
Working Temperature Range -10°C to 60°C (14°F to 140°F)
WETTED COMPONENTS Aluminum, Stainless Steel, Steel, Nylon, Viton, Nitrile Rubber & POM
FLOW RATE 1 to 30 LPM (0.3 to 8 GPM)
CAT NR.
ORDERING #
With Steel Extension
CAT NR.
Oval Gear Mechanism
Maximum Pressure 870 PSI (60 BAR)
ORDERING #
INLET THREADS
With Hose Extension
OM-20/OGY/RM/B
45771
OM-20/OGY/FM/B
45781
1/2" BSPT (F)
OM-20/OGY/RM/N
45776
OM-20/OGY/FM/N
45786
1/2" NPT (F) 7
7
Lever Oil Guns G19
Product Features Rugged and robust zinc plated lever handle
• • •
• • • •
Heavy Duty Oil Gun handles flowable greases & light oils without leakage High Quality CDW Steel Barrel with fully machined seam for leak proof operation Grease Gun Follower designed for use with both Oils & Grease & works with 14 oz. (400 gm) Grease cartridge or 500 cc Bulk without the need to flip the follower Develops upto 10,000 PSI / 690 BAR Variable stroke feature built in for use in confined areas High Tolerance Aluminum Die Cast Gun Head Complete with a choice of 6” (150 mm) steel extension or 12” (300 mm) flexible hose & professional 4 jaw coupler with ball check
Ergonomically designed rubber grip
Unique Lock Lever mechanism allows user to easily lock plunger rod in any position
Non slip textured powder coated finish
CARTRIDGE LOADING
10,000 PSI (690 BAR)
FILLER PUMP LOADING
1 gm / stroke (1 oz. / 28 strokes) VARIABLE STROKE
CAT. NR.
ORDERING NR.
With Steel Extension & Coupler
8
CAT. NR.
SUCTION FILL
ORDERING NR.
THREADS
With Flexible Hose & Coupler
G19R/B
42740
G19F/B
42745
1/8” BSPT
G19R/M
42741
G19F/M
42746
M10 X 1
G19R/N
42742
G19F/N
42747
1/8” NPT
HAND FILL
8
Waste Oil Drain
WOD-68
Product Features •
• • • • • • •
Oil Drain with wheel mounted tank for gravity draining of motor, engine, gearbox & differential oils, transmission & power steering fluids etc. from all types of motor vehicles placed on auto lift or a pit Centrally Mounted 10 Litres (10.50 QT.) capacity bowl is height adjustable & can be optimally positioned allowing oil draining as well as other maintenance operations Durable all-steel design and re-inforced castors; the unit provides a safe & affordable option for draining , transferring & evacuating used oil Designed for excellent mobility , easy bowl positioning & simple to use pressurized evacuation Comes complete with a 14” (355mm) telescopic bowl that can be adjusted from 45” (1143 mm) to 72” (1828 mm) 68 Litre (18 gallon) tank includes a preset air regulator that allows the use of standard compressed air upto 150 PSI (10 BAR) Tank includes a safety valve and a reinforced dispensing hose that doubles as a sight gauge to prevent overfilling Not for use with fuels and corrosive media
Dispensing hose doubles as a sight gauge to prevent over filling
Specifications Used Oil being drained from vehicle in an automotive workshop
CAT. NR.
ORDERING NR.
WOD/68
44600
Tank Capacity
68 Litre / 18 Gallons
Max. Collection capacity
55 Litre / 14.5 Gallons
Bowl Capacity
10 Litres / 10.50 Quarts
Bowl inner Diameter
14” (355 mm)
Length of draining Hose
2 meter
Maximum Height
72” (1828 mm)
Minimum Height
45” (1143 mm)
Recommended Draining Pressure
8 PSI (0.5 BAR) 9
9
Heavy Duty Electric Fuel Pumps FPM
Product Features
Tank mounting
• • • • • • •
Heavy Duty Industrial Grade Fuel pumps designed for Every Day use in Agricultural, Construction, Automotive & Industrial applications Rain & Weather proof for tough outdoor use Lightweight, yet strong non corroding Aluminum Die cast construction Geared pump design using precision sintered metal gears Geared construction makes the pump tolerant to contaminants in fuel; in addition to offering tremendous suction & minimal noise UL & cUL listed Motor Duty Cycle: 30 Minutes On / 30 Minutes Off
WETTED COMPONENTS Aluminum, Steel, Cast Iron, Nylon, NBR, Zinc, Viton, Polypropylene, PVC RECOMMENDED USE Gasoline, Diesel, E15 Fuel, Kerosene, Bio Diesel (B20)
Pump Internals Out Drum mounting
Wire Mesh Strainer
Sintered Powder Metal Gears
In
10
15 GPM (57 LPM)
Specifications FPM-12
FPM-24
FPM-115
FPM-220
Description
Heavy Duty 12V DC
Heavy Duty 24V DC
Heavy Duty 115V AC
Heavy Duty 220V AC
Flow Rate
Upto 15 GPM (57 LPM)*
Upto 15 GPM (57 LPM)*
Upto 15 GPM (57 LPM)
Upto 15 GPM (57 LPM)
1/4 HP 12V DC
1/4 HP 24V DC
1/4 HP 115V AC , 60 Hz.
1/4 HP 230V AC , 50/60 Hz.
Amp draw from Battery
12 Amp
6 Amp
1.7 Amp
1 Amp
Internal bypass valve
Yes
Yes
Yes
Yes
Suction Pipe
Steel
Steel
Steel
Steel
Hose
3/4" x 12' Anti Static Hose
3/4" x 12' Anti Static Hose
3/4" x 12' Anti Static Hose
3/4" x 12' Anti Static Hose
Tank Adapter
2" Threaded
2" Threaded
2" Threaded
2" Threaded
Inlet
1" NPT
1" NPT
1" NPT
1" NPT
Outlet
3/4" NPT
3/4" NPT
3/4" NPT
3/4" NPT
Dispensing Nozzle
3/4" Manual with Swivel
3/4" Manual with Swivel
3/4" Manual with Swivel
3/4" Manual with Swivel
Battery Cable (2 Wire)
15'
15'
NA
NA
Explosion Proof Motor
FLOW RATE Upto 15 GPM (57 LPM)*
*Measured at pump outlet with Vehicle Engine switched on
CAT NR.
ORDERING #
MOTOR
FPM-12
44040
12 V DC
FPM-24
44041
24 V DC
FPM-115
44042
115V AC
FPM-220
44043
220V AC 11
20 GPM (75 LPM)
10
Heavy Duty High Flow Electric Fuel Pump FPM-HF
Product Features
•
• • • • • •
Specifications
Heavy Duty Industrial Grade High Flow Fuel pump designed for heavy duty usage in Agricultural, Construction, Automotive & Industrial applications Rain & Weather proof for tough outdoor use Lightweight yet strong, non corroding Aluminum Die cast construction Geared pump design using precision sintered metal gears Geared construction makes the pump tolerant to contaminants in fuel; in addition to offering tremendous suction & minimal noise UL & cUL listed Motor Duty Cycle: 30 Minutes On / 30 Minutes Off
WETTED COMPONENTS Aluminum, Steel, Cast Iron, Nylon, NBR, Zinc, Viton, Polypropylene, PVC RECOMMENDED USE Gasoline, Diesel, E15 Fuel, Kerosene, Bio Diesel (B20)
12
CAT NR.
ORDERING #
FPM/12/HF
44045
Description
Heavy Duty 12V DC
Flow Rate*
Upto 20 GPM (75 LPM)
Explosion Proof Motor
1/4 HP 12V DC
Amp draw from Battery
15 Amp
Internal bypass valve
Yes
Suction Pipe
Steel
Hose
1" x 12' Anti Static Hose
Tank Adapter
2" Threaded
Inlet
1" NPT
Outlet
1" NPT
Dispensing Nozzle
1" Manual with Swivel
Battery Cable (2 Wire)
15'
FLOW RATE Upto 20 GPM (75 LPM)*
*measured at pump outlet with Vehicle Engine Switched On
Drum mounting
11
Electric Fuel & Oil Pump EOP
Product Features
• • • •
•
•
Specifications
Vertical mount Fuel & Oil pump designed for Indoor use in Industrial, Automotive, Heating & Marine applications For use with non flammable media Pumps have built in Bung Adapter to fit directly onto drums with a 2” threaded opening Manufactured from chemically inert materials; these pumps work with a wide variety of low viscosity media. Pump motor has double insulation which makes them safe for use with water & emulsions Built-In Anti Siphoning system ensures that media does not flow out by Siphon action incase of accidental damage to the delivery hose or dispensing nozzle Duty Cycle: Continuous Duty
WETTED COMPONENTS POM, Polypropylene, Stainless Steel, Nitrile Rubber, Viton & PTFE
Flow Rate*
Upto 10.5 GPM (40 LPM)
Motor
0.43 HP Centrifugal AC Motor
Amp draw from Battery
2.9 Amp
Max. Viscosity of Media
114 cSt
Internal bypass valve
No
Suction Hose
3/4” ID x 1 m long complete with Stainless Steel Strainer
Discharge Hose
3/4" x 3m long
Tank Adapter
2" Threaded
Inlet
3/4” Hose Barb
Outlet
3/4" Hose Barb
Dispensing Nozzle
Manual Polypropylene Nozzle with ¾” Hose Barb
Power Cord
2 m long
FLOW RATE Upto 10.5 GPM (40 LPM)*
* measured at pump outlet tested using Diesel at 20°C
Working Temperature Range -10°C to +40°C (14°F to 104°F)
Drum Mounting
RECOMMENDED USE Diesel, Kerosene, Mineral & Synthetic Oils, Heating Oils, Antifreeze, Water, Emulsions etc.
CAT NR.
ORDERING #
DESCRIPTION
EOP/AC/230
45520
230V AC
EOP/AC/110
45522
110V AC 13
12
Mechanical Fuel Meters FM-10
Product Features
• • • • • • • • •
High Accuracy Flow meter with Mechanical register Nutating Disc mechanism offers high tolerance to fuel contamination Meter is designed for both In-Line applications & gravity flow (with a minimum gravity head of 4’) Ideal for use with Electric Fuel pumps Register cap can be easily removed & rotated to every 90° orientation for display reading Robust Aluminum Die Cast construction Easy user re calibration Works with both Fuels & Oils Available in Litre / Gallon version
RECOMMENDED USE Diesel, Biodiesel, Low to Medium Viscosity Oils DO NOT USE WITH Gasoline, Water based media
Specifications Flow rate
20 to 120 LPM (5 to 32 GPM)
Accuracy
+ / - 1%
Repeatability
+ / - 0.30%
Max. Working Pressure
145 PSI (10 BAR)
Burst Pressure
435 PSI (30 BAR)
Pressure Loss
3 PSI (0.20 BAR)
Working Temperature range
-10°C to 60°C (14°F to 140°F)
Max. Resettable Batch Total
999 Litres or 99 Gallons
Max. Non Resettable Totalizer
9,99,999 Litres or 99999.9 Gallons
Least Count /Resolution
0.10 Litres or 0.10 Gallons
FLOW RATE 20 to 120 LPM (5 to 32 GPM)
Maximum Working Pressure 145 PSI (10 BAR)
Working Temperature Range -10°C to 60°C (14°F to 140°F)
WETTED COMPONENTS Aluminum, Buthil Tereftalat, Nitrile Rubber
Display can be changed by rotating the card in its housing thus ensuring greater versatility in positioning
14
FM-10 meter fitted to a 12V Electric Fuel Pump
FM-10 meter in use with manual hand rotary pump
Nutating Disc Mechanism
CAT NR.
ORDERING #
MEASUREMENT
THREADS
FM-10/0-1/BSP
45640
Litres
1" BSP (F)
FM-10G/0-1/N
45641
Gallons
1" NPT (F)
Note: Not to be used to measure media for resale 15
13
Digital Fuel Meters FM-20
Product Features
• • • • • • • •
Digital Turbine meter for low viscosity fluids, easy to install in line or for end of the line applications Polypropylene Turbine measuring mechanism Electronic Display using two AAA 1.5V batteries Polyamide body and sealed electronic card make it suitable for use in severe weather conditions Display can be rotated in 4 different positions Measures in Litres, Quarts, Pints & Gallons Easy user re calibration Includes one additional stainless steel adaptor to convert from ½” male to ½” female threads
RECOMMENDED USE Diesel, Gasoline, Bio Diesel, Windshield Fluid, Water DO NOT USE WITH Oils WETTED COMPONENTS Polyamide, Polypropylene, Viton
16
Specifications Flow rate
5 to 120 LPM (1.3 to 32 GPM)
Accuracy
+/-1%
Repeatability
+ / - 0.30%
Max. Working Pressure
300 PSI (20 BAR)
Burst Pressure
580 PSI (40 BAR)
Pressure Loss
0.50 PSI (0.04 BAR)
Working Temperature range
-10°C to 50°C (14°F to 122°F)
Max. Resettable Batch Total
99,999 units
Max. Non Resettable Totalizer
9,99,999 units
Least Count /Resolution
0.001 units
Water Resistance
IP55
FLOW RATE 5 to 120 LPM (1.3 to 32 GPM)
Maximum Working Pressure 300 PSI (20 BAR)
Working Temperature Range -10°C to 50°C (14°F to 122°F)
Display can be changed by rotating the card in its housing thus ensuring great versatility in postioning
Stainless Steel adaptor provided with each meter to convert from 1� male to 1� female threads
FM-20 meter installed at the outlet of a Fuel Control Nozzle for measuring quantum of fuel dispensed
CAT NR.
ORDERING #
THREADS
FM-20/0-1/BSP
45650
1" BSP (M)
FM-20/0-1/N
45651
1" NPT (M)
Note: Not to be used to measure media for resale 17
14 Fuel Control Nozzles - Automatic FCNA
Product Features
• •
•
For Use with Electric Fuel Pumps Dual Mode: Manual & Automatic. Sensor built into the discharge spout outlet automatically shuts off supply once fuel level in the tank reaches that of the outlet discharge spout Heavy Duty Die Cast Aluminum Body, Trigger & Guard from Thermoplastic & protective vinyl grip on the nozzle body
RECOMMENDED USE Diesel, Kerosene, Leaded & Unleaded Gasoline WETTED COMPONENTS Aluminum, Steel, Nitrile Rubber
Maximum Pressure 50 PSI (3.45 BAR)
18
CAT NR.
ORDERING #
SPOUT TYPE
INLET THREADS
SPOUT DIA (OD)
SPOUT DIA (ID)
MAX. FLOW RATE
FCNA/3-4/N
45570
Straight
3/4” NPT (F)
0.83” (21 mm)
0.63” (16 mm)
15 GPM (57 LPM)
FCNA/0-1/N
45571
Curved with Spring
1” NPT (F)
1.06” (27 mm)
0.83” (21 mm)
30 GPM (110 LPM)
15 Fuel Control Nozzles - Metered FM20-FCN
Product Features
Specifications • • • • • • •
Manual Fuel Control Nozzle fitted with Digital Fuel Meter Nozzle with Die cast Aluminum Construction with built in Swivel at inlet and switch for un-attended continuous dispensing Polypropylene Turbine measuring mechanism Electronic Display using two AAA 1.5V batteries Polyamide meter body and sealed electronic card makes it suitable for use in severe weather conditions Measures in Litres, Quarts, Pints & Gallons Easy user re calibration
RECOMMENDED USE Diesel, Gasoline
Flow rate
5 to 120 LPM (1.3 to 32 GPM)
Accuracy
+/-1%
Repeatability
+ / - 0.30%
Max. Working Pressure
150 PSI (10 BAR)
Burst Pressure
580 PSI (40 BAR)
Working Temperature range
-10°C to 50°C (14°F to 122°F)
Max. Resettable Batch Total
99999 units
Max. Non Resettable Totalizer
999999 units
Least Count /Resolution
0.001 units
Water Resistance
IP55
Inlet
¾” (F) or 1” (F)
DO NOT USE WITH Oils WETTED COMPONENTS Polyamide, Polypropylene, Aluminum, Steel, Nylon, Nitrile Rubber, Viton
FLOW RATE 5 to 120 LPM (1.3 to 32 GPM)
Maximum Working Pressure 150 PSI (10 BAR)
CAT NR.
ORDERING #
INLET THREADS
OUTLET SPOUT (OD)
FM-20/FCN/3-4/BSP FM-20/FCN/3-4/N
45660
3/4” BSP (F)
3/4” (19 mm)
45661
3/4” NPT (F)
3/4” (19 mm)
FM-20/FCN/0-1/BSP FM-20/FCN/0-1/N
45665
1" BSP (F)
1" (25 mm)
45666
1" NPT (F)
1" (25 mm)
Working Temperature Range -10°C to 50°C (14°F to 122°F)
19
16
Grease Control Valve - Metered
Specifications
Product Features • • •
• • • •
Premium quality Grease Control valve, for use with air operated grease pumps Built-In High Accuracy Digital Grease Meter for dispensing exact amount of grease Ability to measure amount of grease dispensed prevents both over & under lubrication & is invaluable in saving bearing failures Provides continuous grease flow, with trigger fully pressed Steel construction, provides durability & longevity. Meter uses oval gear technology Ergonomically designed pistol handle Comes complete with 6” steel extension & heavy duty coupler
Control Valve Type
Continuous Flow
Meter Type
Digital Oval Gear
Grease Flow
0.1 to 2.5 kg / minute
Max. Working Pressure
8000 PSI (550 BAR)
Unit of Measurement
Kg
Accuracy
+/- 3%
Resettable Batch Total
9,999 gms
Cumulative Total
99999.9 kg
Battery Type
1.5 V (Two numbers)
Oval Gear Mechanism
Maximum Pressure 8,000 PSI (550 BAR)
DGM/1/B Grease Meter available as spare for in-line applications
Skin Injection Hazard. Keep away from nozzle
CAUTION The gun is continuous action. Be careful not to over lubricate.
CAT NR.
ORDERING #
DESCRIPTION
THREAD SPECIFICATION
APG/04/1-4F/GM/B
43415
Meter Fitted to a Grease Control Valve
Inlet: 1/4” BSPT (F)
APG/04/1-4F/GM/N
43416
Meter Fitted to a Grease Control Valve
Inlet: 1/4” NPT (F)
DGM/1/B
45620
In-Line Grease Meter
Inlet/Outlet: 1/8” BSPT
20
17 Ultimate Variable Stroke All Weather Pistol Grease Gun G80 / G85
Product Features • • • • • • • • • •
All weather gun , designed especially for use in cold weather Large Grease Inlet with venturi action helps retain prime Unique variable stroke mechanism for both High volume & high pressure applications. High volume for faster greasing & high pressure for use in cold weather Built tough: Robust barrel 0.049” (1.2 mm) thick, Heavy Duty Follower Spring, CNC machined grease gun head, large rolled threads for fast & easy re-loading etc Drop resistant Pistol Grip design Most useful for greasing in confined spaces or where access to grease fitting is restricted Machined to very close tolerances with perfect fits Compression Spring design allows greasing with minimal effort Works great with all grease types (NLGI 1 , 2 & 3) Complete with 12” (300 mm) high pressure flexible hose & professional 4 jaw coupler with ball check
Large grease inlet in the grease gun head
Double lipped follower used on 14 oz. (400 gm) grease gun. No flipping required when using with cartridge or bulk
Upto 0.90 gm / stroke (1.30 oz. / 40 strokes)
7,000 PSI (483 BAR)
CARTRIDGE LOADING
Bulk loader valve that doubles as an air bleeder
SUCTION FILL
High Volume Setting
CAT NR.
ORDERING #
CARTRIDGE CAPACITY
BULK CAPCITY
THREADS
G80F-HP/B
43045
14 oz. (400 gms)
500 cm³
1/8” BSPT
G80F-HP/M
43046
14 oz. (400 gms)
500 cm³
M10 X 1
G80F-HP/N
43047
14 oz. (400 gms)
500 cm³
1/8” NPT
G85F-HP/B
43048
450 gms
650 cm³
1/8”BSPT
FILLER PUMP LOADING
VARIABLE STROKE
High Pressure Setting
21
18
Mini Lever Grease Gun G14
Product Features • • • •
Mini Lever Grease Gun with die cast Grease Gun Head Compact Tool Box Size Capacity: 3 oz (85 gms) grease cartridge or 120 cc bulk fill Complete with 6” steel extension and 4 jaw coupler with ball check
6,000 PSI (413 BAR)
22
CARTRIDGE LOADING
SUCTION FILL
0.55 gm/stroke (0.80 oz./40 strokes)
CAT NR.
ORDERING #
THREADS
G-14R/B
43280
1/8” BSPT
G-14R/M
43281
M10 X 1
G-14R/N
43282
1/8” NPT
CLEAR TUBE equipment
PERFECT ADDITION
to any Lubrication Programme proper identification of grease eliminates cross-contamination visibility of air pockets visibility to remaining grease
Also available with colour coded end caps for colour coding of grease guns based on grease type, frequency of use or application point
eliminates risk of mixing greases
DROP RESISTANT IMPACT RESISTANT CRUSH PROOF 23
19
Clear Tube Lever Grease Guns
Product Features • • • • • • • •
Heavy Duty Lever Grease Gun for punishing day-in & day-out heavy use Tough & Impact Resistant Polycarbonate tube with die cast aluminum adaptors High Tolerance Aluminum Die Cast Grease Gun Head fitted with Bulk Loader & Air Release Valve Variable stroke feature built in for use in confined areas Develops 10,000 PSI (690BAR) Delivers upto 1 gm / stroke (1 oz. per 28 strokes) Complete with 6” (150 mm) steel extension & professional 4 jaw coupler with ball check Available in choice of 14 oz. (400 gm) capacity or 450 gm capacity popular in Australia & NewZealand
Quick lubricant identification eliminating the risk of mixing incompatible or unspecified lubricants
10,000 PSI (690 BAR)
Also available with colour coded end caps for colour coding of grease guns based on grease type, frequency of use or application point
CAT. NR.
24
CARTRIDGE LOADING
1 gm/stroke (1 oz./28 strokes)
FILLER PUMP LOADING
SUCTION FILL
ORDERING NR.
CARTRIDGE CAPACITY
BULK CAPACITY
THREADS
G1R/HD/B-CL
46900
14 oz. (400 gms.)
500 cm³
1/8" BSPT
G1R/HD/M-CL
46901
14 oz. (400 gms.)
500 cm³
M10 X 1
G1R/HD/N-CL
46902
14 oz. (400 gms.)
500 cm³
1/8" NPT
G4R/HD/B-CL
46903
450 gms
650 cm³
1/8" BSPT
VARIABLE STROKE
20
Clear Tube Pistol Grease Guns
Product Features • • • • • • • •
One Hand Operated Grease Gun designed for use in confined spaces or where access to grease nipple is limited Tough & Impact Resistant Polycarbonate tube with die cast aluminum adaptors Heavy Duty Aluminum Die Cast Grease Gun Head fitted with steel block nut Super strong pistol grip handle designed to prevent fingers from “pinching” Develops 5,000 PSI /345 BAR Delivers upto 0.50 gm / stroke (0.70 oz. per 40 strokes) Complete with 4” ( 100 mm) steel extension , 12” (300 mm) Flexible Hose Extension & professional 4 jaw coupler with ball check Available in choice of 14 oz. (400 gm) capacity or 450 gm capacity popular in Australia & NewZealand
Clear Tubes provide visibility to remaining grease in the tube and air pockets, in case of Bulk Grease usage
5,000 PSI (345 BAR)
Also available with colour coded end caps for colour coding of grease guns based on grease type, frequency of use or application point
CAT. NR.
ORDERING NR.
CARTRIDGE LOADING
CARTRIDGE CAPACITY
0.50 gm/stroke (0.70 oz./40 strokes)
SUCTION FILL
BULK CAPACITY
THREADS
G5RF/B-CL
46920
14 oz. (400 gms.)
500 cm³
1/8" BSPT
G5RF/M-CL
46921
14 oz. (400 gms.)
500 cm³
M10 X 1
G5RF/N-CL
46922
14 oz. (400 gms.)
500 cm³
1/8" NPT
G4RF/PST/B-CL
46923
450 gms
650 cm³
1/8" BSPT 25
21
Clear Tube Barrel Pump
Product Features • • • • • • •
Professional Barrel pump for pumping all types of oils Tough & Impact Resistant Polycarbonate tube with die cast aluminum adaptors Ribbed section Aluminum Die Cast pump head for maximum strength Nitrile Rubber Piston rings for smooth operation Built-in 1-1/2” & 2” bung for use on drums with either opening Delivers 300 ml (10 oz.) per stroke Comes complete with metal discharge spout & telescopic suction tube for use on 15 gallon (50 litres) to 55 gallons (205 litres) barrels
WETTED COMPONENTS Steel, Aluminum, Zinc, Nitrile Rubber, Polycarbonate RECOMMENDED USE For use with oil based fluids, heating oils, motor oils, heavy & light oils, Diesel & kerosene DO NOT USE Water based fluids, solvents, acids, antifreeze, gasoline etc.
Visibility to lubricant contamination
300 ml (10 oz.) / stroke
26
CAT. NR.
ORDERING NR.
LBP/04-CL
46950
22
Clear Tube Suction Gun
Product Features •
• • • • • • •
Rugged transfer gun designed for use with gear oils to get them both into & out of gear boxes, transfer cases & differentials Tough & Impact Resistant Polycarbonate tube with die cast aluminum adaptors Die Cast Aluminum Head Deluxe lip seal provides maximum suction Needs no priming Fully Serviceable Suitable for use with non corrosive liquids Capacity: 500 ml (16 oz.)
Visibility to lubricant contamination
CAT. NR.
ORDERING NR.
SG/10/BL-CL
46940 27