Leica PowerAntenna Superior performance where you need it
The key to productivity Whether your machine needs a GNSS position or heading, your site base station needs the simplest “turn on & go” function, or your supervisor needs to check grade with his 4-wheel drive then stake out a manhole the next minute – Leica PowerAntenna can do the job. Leica PowerAntenna is the world’s first system that uses the same components for on- and off-machine applications. Combine Leica PowerAntenna with the Leica PowerBox to boost productivity of your excavator with dual GNSS positions, move it to a pole for staking out or checking as-builts while the excavator continues to work in single GNSS operation, or use it as a base station that site personnel can easily set-up. The scalable design allows you to tailor the system precisely to your needs.
www.grupoacre.com 902 490 839
Leica’s cutting edge technology is your gateway to greater efficiency. Benefits nnScalable GNSS - upgradeable as you grow (pay for what you need) nnVersatile System - suits many applications (pole, base, machine, supervisor, …) - extendable to dual GNSS - Stake-out / Grade Check - choose from a wide range of communication devices - use one controller for many sensors nnBluetooth® for cable-free communication nnSuperior GNSS Leica Technology nnGLONASS enabled for improved Satellite coverage
Leica PowerAntenna Machine, Base, Supervisor... I can do it all! Machine
Base Station
Supervisor
Increase your machine accuracy and efficiency with the unique Leica Redline, Dual GNSS solution.
Leica PowerAntenna is the perfect mobile base station for your construction site.
Why wait for a surveyor? Check cut/fill or carry out stake-outs and as-builts yourself by simply moving the PowerAntenna from the machine to the pole.
Work in single or dual GNSS modes with Leica PowerBox and Leica PowerAntenna depending on your job-site needs.
Increase the versatility of your equipment by using the same components on your machine, for grade staking/checking or as a base station.
When the job is done, put the PowerAntenna back on the excavator or on the roof of your vehicle.
Specifications GNSS technology
SmartTrack+ dual frequency 14 L1 + 14 L2 GPS 12 L1 + 12 L2 GLONASS
RTK Technology
SmartCheck+, for advanced, long range RTK with 99.99% Reliability
Kinematic RTK
Horizontal: 10 mm + 1 ppm
Accuracy (phase),
Vertical: 20 mm + 1 ppm
after initialisation Power Supply
Li-Ion 2.2 Ah / 7.4 V for Pole Solution (last for 5 h). Ni-MH 9.0 Ah / 12V for reference setup. On-machine via PowerBox.
Position output rate
Off-machine: 1 Hz standard, 5 Hz option On-machine: max. 20 Hz (with PowerBox)
RTK data Formats
Leica (Lite), CMR, CMR+, RTCM v2.x / 3.0; Network correction (option)
Ref. Station Communication
Leica Lite RS232, RS422,
PowerAntenna
Bluetooth® Wireless Technology
Shock
ISO 9022
Vibration Environmental
MIL 810.F Cat 24 IP67
Upgrade Options
specifications The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Leica Geosystems AG is under license.
Leica PowerTracker Tracking sensor
Windows and Windows CE are a registered trademark of Microsoft Corporation. All other trademarks are the property of their respective owners.
Leica MPR122 360° Prism High accuracy target
Leica PowerBox GNSS Receiver
GLONASS
Work with less visible view to sky
Positioning PLUS
Work with a higher positioning update rate (5 Hz)
Positioning Xtra
Work with increased positioning update rate (2Hz)
Baseline Xtra
Work up to 5 km (3 miles) from base station
Baseline PLUS
Work with unlimited base line length
Networking PLUS
Work, even if you do not have a base station
PowerBox
Where you need Position and Orientation
Leica MNA1202 GNSS Antenna
Illustrations, descriptions and technical data are not binding. All rights reserved. Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2007. 762607en – III.09 – RDV Total Quality Management – Our commitment to total customer satisfaction. Find out more about our TQM program from your local Leica Geosystems representative.
Leica Geosystems AG Heerbrugg, Switzerland www.leica-geosystems.com
Leica PowerAntenna GNSS Receiver
Leica MCP950C WinCE TM controller
www.grupoacre.com 902 490 839