TM
TM
TM
During extreme turns and high speed,
During extreme turns and high speed,
the water becomes detached from the fin surface,
the dimpled surface ‘sucks’ the water back over the fin,
causing the fin to stall or spin out.
increasing speed and hold.
The same effect is seen with a golf ball, where the dimples ‘suck’ the air back over the ball, increasing speed and drive.
MOONRAKERR / XCS SERIES Features Dimple technology and is ideal for the surfer looking for more control and extra speed. These fins have a more forgiving feel through top and bottom turns but at the same time generate extra speed when attempting more critical manouvres. ~ Advanced fibre reinforced thermo polymer construction ~ ~ Dimpled technology for more speed, more drive, more hold ~
The XCS LITE ™ XS is the grommet dream. It’s super fast,
XS
super responsive and super fun. Perfect to add a bit more
xcs lite xs full base
The XCS LITE ™ 7.0 creates extra drive and speed for
7.0
both heavier surfers and those that simply want more “fin” in
speed, power and control to your turns.
the water when it counts. The extra speed generated by the
Surfer Size 45 - 64 kg ( 99-143lb) Fin Size Height 4.22" Base 4.26" Rake 32 degrees
dimples is really noticeable straight after take off and through turns especially when surfing softer, slower waves.
xcs lite 7.0 full base
xcs lite xs twin tab
xcs lite 7.0 twin tab
The 5.0 has a lively feel and is the most popular of our
Adding dimple technology to a quad set up adds even
XCS LITE ™ range. The dimples give an immediate burst of
more drive, increases speed down the line and improves
speed straight after take off, as well as into and out of turns. The
manoeuvrability. These Quads could be the difference in
unique flex patterns make for smooth transitions and good control.
5.0
Surfer Size 60-85kg (132-187lb) Fin Size Height 4.55" Base 4.37" Rake 32.5 degrees xcs lite 5.0 full base
xcs lite 5.0 twin tab
Surfer Size 75kg up ( 165lb) Fin Size Height 4.64" Base 4.72” Rake 35 degrees
making it out of a super deep tube. Our set up is XS at . the back and 5.0 at the front.
Surfer Size 65kg up ( 132lb) Front height 4.55" Base 4.37" Back height 4.22" Base 4.26"
QD
xcs lite quad full base
xcs lite quad twin tab
XS
The XCS PREMIUM ™ XS is the grommet dream. It’s super fast, super responsive and super fun. Perfect to add a bit more
5.0
XCS PREMIUM ™ range. The dimples give an immediate burst of
speed, power and control to your turns.
speed straight after take off, as well as into and out of turns. The
Surfer Size 45 - 64 kg ( 99-143lb) Fin Size Height 4.22" Base 4.26" Rake 32 degrees
unique flex patterns make for smooth transitions and good control.
Surfer Size 60-85kg (132-187lb) Fin Size Height 4.55" Base 4.37" Rake 32.5 degrees
The XCS PREMIUM ™ XS is the grommet dream. It’s super
The 5.0 has a lively feel and is the most popular of our
fast, super responsive and super fun. Perfect to add a bit more
XCS PREMIUM ™ range. The dimples give an immediate burst of
speed, power and control to your turns.
speed straight after take off, as well as into and out of turns. The
Surfer Size 45 - 64 kg ( 99-143lb) Fin Size Height 4.22" Base 4.26" Rake 32 degrees
The 5.0 has a lively feel and is the most popular of our
XS
unique flex patterns make for smooth transitions and good control.
Surfer Size 60-85kg (132-187lb) Fin Size Height 4.55" Base 4.37" Rake 32.5 degrees
5.0
7.0
The XCS PREMIUM ™ 7.0 creates extra drive and speed for
Adding dimple technology to a quad set up adds even
both heavier surfers and those that simply want more “fin” in
more drive, increases speed down the line and improves
the water when it counts. The extra speed generated by the
manoeuvrability. These Quads could be the
dimples is really noticeable straight after take off and through
difference in making it out of a super
turns especially when surfing softer, slower waves.
deep tube. Our set up is XS at the
Surfer Size 75kg up ( 165lb) Fin Size Height 4.64" Base 4.72” Rake 35 degrees
back and 5.0 at the front.
Surfer Size 65kg up ( 132lb) Front height 4.55" Base 4.37" Back height 4.22" Base 4.26"
The XCS PREMIUM ™ 7.0 creates extra drive and speed for
Adding dimple technology to a quad set up adds even
both heavier surfers and those that simply want more “fin” in
more drive, increases speed down the line and improves
the water when it counts. The extra speed generated by the
manoeuvrability. These Quads could be the difference in
dimples is really noticeable straight after take off and through turns especially when surfing softer, slower waves.
Surfer Size 75kg up ( 165lb) Fin Size Height 4.64" Base 4.72” Rake 35 degrees
QD
making it out of a super deep tube. Our set up is
7.0
XS at the back and 5.0 at the front.
Surfer Size 65kg up ( 132lb) Front height 4.55" Base 4.37" Back height 4.22" Base 4.26"
QD
MOONRAKERR XDS HEXCORE / FIBREGLASS SERIES Features unique Dimple technology. It has a Hexcore/Fibreglass
4.0
The 4.0 is our step-up Grom/Manchild fin: just what a grom
construction with 3 layers of flex for tour level performance.
on the grow needs. The dimples combined with extra base give
From take off to bottom turn, and then into the pocket, these fins
area at the tip allows for the release so Manchild can do whatever he
impressive drive with the slightest push on the pedal. The reduced
wants to do. This fin is also great for bigger surfers wanting some fun
maximize speed and improve drive for experienced surfers
in smaller waves.
Surfer Size 55-75kg ( 121-165 lb) Height 4.42" Base 4.29" Rake 32.4 degrees
with high-performance requirements. ~ Dimple technology for more speed, more drive and more hold ~ ~ Hexcore/fibreglass construction for extra durability & strength ~ ~ Stiff base with graduated flex ratios for increased drive ~
INTRODUCING THE NEW 3DFINS XDS SERIES
The 4.0 is our step-up Grom/Manchild fin: just what a grom
TM
on the grow needs. The dimples combined with extra base give impressive drive with the slightest push on the pedal. The reduced area at the tip allows for the release so Manchild can do whatever he wants to do. This fin is also great for bigger surfers wanting some fun in smaller waves.
Surfer Size 55-75kg ( 121-165 lb) Height 4.42" Base 4.29" Rake 32.4 degrees
4.0
This medium sized template is the great all-rounder: Effective for all
5.0
styles of surfing in just about any set of conditions, these dimpled fins
This wide-based Dimpled template gives maximum drive, allowing
6.0
are high performance, with the flat inner face allowing for more
launches are made easy when you ride this fin.
control at extreme speeds.
Surfer Size 60-85kg (132-187lb) Fin size Height 4.56" Base 4.34" Rake 32 degrees
Surfer Size 60 - 85kg (132-187lb) Fin size Height 4.55" Base 4.37" Rake 32.8 degrees
This medium sized template is the great all-rounder: Effective for all
This wide-based Dimpled template gives maximum drive, allowing
styles of surfing in just about any set of conditions, these dimpled fins
for extreme turns at very high speeds. Sharp bottoms to vertical
are high performance, with the flat inner face allowing for more
launches are made easy when you ride this fin.
control at extreme speeds.
Surfer Size 60 - 85kg (132-187lb) Fin size Height 4.55" Base 4.37" Rake 32.8 degrees
for extreme turns at very high speeds. Sharp bottoms to vertical
5.0
Surfer Size 60-85kg (132-187lb) Fin size Height 4.56" Base 4.34" Rake 32 degrees
6.0
7.0
The 7.0 template is used by Kerrzy more than any other.
The Quad has refined foils and added dimples turn this model
Our dialed in foils, extra rake, wide base and reduced
into a super quad. The rear fins have dimples on both faces,
area at the tip allow for drawn out bottom turns, swooping
reducing any extra drag and allowing for tighter radius turns.
cut backs and down-the-line speed required for long point
Best for barrels, long walls and anything you want to out-run.
breaks or big open faces.
Surfer Size 65kg up ( 132lb) Front height 4.55" Base 4.37" Back height 4.22" Base 4.26"
Surfer Size 75kg up ( 165lb) Height 4.64" Base 4.72" Rake 35 degrees
The 7.0 template is used by Kerrzy more than any other.
The Quad has refined foils and added dimples turn this model
Our dialed in foils, extra rake, wide base and reduced
into a super quad. The rear fins have dimples on both faces,
area at the tip allow for drawn out bottom turns, swooping
reducing any extra drag and allowing for tighter radius turns. Best for barrels, long walls and anything you want to out-run.
cut backs and down-the-line speed required for long point breaks or big open faces.
Surfer Size 75kg up ( 165lb) Height 4.64" Base 4.72" Rake 35 degrees
QD
7.0
Surfer Size 65kg up ( 132lb) Front height 4.55" Base 4.37" Back height 4.22" Base 4.26"
QD
Juicer 155 (6, 1/4 “) - The single fin journey begins.
Juicer 177(7�) – This single fin maintains a classic template
This template has been proven over the ages, but with
with soft, seductive curves. As a slightly larger model, it allows
dimples it becomes brand new. The dialed-in foils with
for more fin in the water, which accommodates for bigger boards,
dimples on both faces allow for reduced drag down the line,
bigger guys and bigger turns. The addition of dimples reduces
incredible drive off the bottom and no dead spots so you
the drag while increasing drive and especially maximizing
have speed to burn off the top. Combined with 4.0 sides,
performance on long boards and SUPs.
this fin is perfect for your single fin performance board, Cruiser, SUP or long board.