Guhring Australian Stock Range 2016-2017 5th edition by Guhring Australia

AUSTRALIAN STOCK RANGE 5th EDITION 2016-2017

CONTENTS

SPOTTING DRILL PRECISION DRILL STEP DRILL POINT ANGLE

T-SLOT DOVE TAILFIRE

HELIX ANGLE RATIO END MILLS

HSCO

CARBIDE

SIGNUM PVD COATING

ROUGHING

SUPER FINISH

MINI SLOT DRILLS

MILLING CUTTERS CORNER RADIUS TITANIIUM

STAINLESS STEEL

CAST IRON ALUMINIUM

HARDENED STEEL

FINISHING

ENGRAVING TOOLS

ROUGHING

CORNER ROUNDING CUTTERS

END MILLS

CHAMFERING MILLING CUTTER

Drills

Taps

Milling cutters

112

Reamers

146

Stub drills

Metric taps

HSCO Milling cutters

113

HSS Reamers

147

Jobber drills

Thread milling cutters 88

T-slot end mills

116

Carbide reamers

155

Long series drills

Imperial taps

Dovetail cutters

117

Centre drills

Fluteless taps

100

Corner rounding cutters 118

Micro-precision drills

Hand taps

104

Carbide milling cutters 119

Spotting drills

Button dies

108

Ball nose milling cutters 132

Step drills

Chamfering milling cutters 136

Taper shank drills

Engraving tools

Carbide ratio drills

Deep hole drills

Gun drills

COUNTERBORING

137

90ยบ

FRONT / BACK DEBURRER

COUNTERSINKS & COUNTERBORES TOLERANCES

COUNTERBORING COUNTERSINKING

IMPERIAL TAPER SHANK

COUNTERBORING

PARALLEL SHANK BRIGHT FINISH 60ยบ

METRIC CARBIDE HSS-E TiAlN COATING

HIGH-PERFORMANCE

3-FLUTE

TAPER SHANK

QUOTATION

FIRE ICE TiN

RECOATING IN-HOUSE

HIGH QU ALITY CAR B IDE

TAPERED END MILLS

PVD COATING

FIRE ICE TiN QUOTATION IN-HOUSE

TAPERED END MILLS RECOATING

SERVICING

RECYCLING

END MILLS REAMERS

SERVICING RECYCLING

SPECIAL TOOLS STEP DRILLS DELIVERING

REGRINDING

PRODUCTION & SERVICE

PVD COATING

TECHNICAL INFORMATION SPECIAL TOOLING END MILLS

H IGH QUALITY CARBIDE

DELIVERING REGRINDING

160

Countersinks

160

Production

173

Technical info.

181

Countersinks

161

Special tools

174

Dimension & angles

182

Deburrer

165

PVD Coating

175

Tolerances

183

Counterbores

166

Questionnaire

176

Conversion table

183

Guhring tool set

170

Recycling carbide

180

Chamfer forms

184

Tapping size holes

185

Types on milling cutters 186

IMPERIAL TAPER SHANK

PITCH

TAPER SANK

ALUMINIUM

CUTTING EDGE

OIL FEED

40XD

REAMING

BSPT THREAD

EXTRA LENGTH

HARDENED STEEL

CAST IRON

HELIX ANGLE BRIGHT FINISH

TAPPING UNF THREAD

NPT THREAD

STAINLESS STEEL

CENTER DRILL

FLUTE

THREAD FORMERS

CARBIDE

SPIRAL FLUTED

FINE THREAD

GUN DRILLS

TiAlN COATING

NC MACHINE REAMERS

FLUTELESS

DEEP HOLE DRILLS

STUB DRILL HSS-E-PM

RATIO DRILL

TWIST DRILLS

METRIC CARBIDE HSS-E

MACHINE REAMERS

HAND-REAMERS HIGH-PERFORMANCE

METRIC BSP THREAD

SIGNUM FINISHING

DRILLS TITANIIUM

MICRO THREAD MILLING CUTTER

GUN NOSE SPIRAL FLUTE

JOBBER DRILLS

BLIND HOLE UNC THREAD

DIES

THROUGH HOLE BSW THREAD

TAPS

TiN

FIRE PVD COATING

INTERNAL COOLANT

CONTENTS

HR500

TAPER SHANK THROUGH HOLE

REAMERS

Milling application

187

Tool materials

189

DISCLAIMER Guhring Australia Pty Ltd cannot be held responsible for errors printed within this book.

DRILLS

TiN

FIRE PVD COATING

JOBBER DRILLS

SIGNUM FINISHING

DRILLS DEEP HOLE DRILLS

STUB DRILL HSS-E-PM

RATIO DRILL

TWIST DRILLS TITANIIUM

GUN DRILLS

STAINLESS STEEL

CARBIDE

SPIRAL FLUTED

EXTRA LENGTH OIL FEED

TAPER SANK

HARDENED STEEL

40XD

CAST IRON

CENTER DRILL

ALUMINIUM

SPOTTING DRILL PRECISION DRILL STEP DRILL POINT ANGLE

HSCO

STUB DRILLS DRILLS

Guhring no.

223

5520

Standard Tool material

HSS

730

2463

DIN 6539 Solid carbide

GU500DZ

GT80

118°

130°

GV120

130°

118°

right-hand

Point angle

5516

HSCO

Cutting direction Tolerance

659

>Ø 2,36

Surface Type

1228

DIN 1897

l2 l1

d1 mm 1.000 1.100 1.200 1.300 1.400 1.500 1.600 1.700 1.800 1.900 2.000 2.100 2.200 2.300 2.380 2.400 2.500 2.600 2.700 2.780 2.800 2.900 2.950 3.000 3.100 3.170 3.200 3.250 3.300 3.400 3.500 3.570 3.600 3.700 3.800 3.900 3.970 4.000 4.100

Inch

3/32

7/64

1/8

9/64

5/32

26.00 28.00 30.00 30.00 32.00 32.00 34.00 34.00 36.00 36.00 38.00 38.00 40.00 40.00 43.00 43.00 43.00 43.00 46.00 46.00 46.00 46.00 46.00 46.00 49.00 49.00 49.00 49.00 49.00 52.00 52.00 52.00 52.00 52.00 55.00 55.00 55.00 55.00 55.00

6.00 7.00 8.00 8.00 9.00 9.00 10.00 10.00 11.00 11.00 12.00 12.00 13.00 13.00 14.00 14.00 14.00 14.00 16.00 16.00 16.00 16.00 16.00 16.00 18.00 18.00 18.00 18.00 18.00 20.00 20.00 20.00 20.00 20.00 22.00 22.00 22.00 22.00 22.00

AVAILABILITY •

•

• •

•

• •

• • •

• •

• • • • • • • • • • • • • • • • • • • • • •

bright

steam tempered

nitrided lands

TiN

• • • • •

• • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • •

• Australian stock item

•

TiAlN

•

• • • m

•

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • •

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

223

5520

Standard Tool material

HSS

730

2463

DIN 6539 Solid carbide

GU500DZ

GT80

118°

130°

GV120

130°

118°

right-hand

Point angle

5516

HSCO

Cutting direction Tolerance

659

>Ø 2,36

Surface Type

1228

DIN 1897

DRILLS

STUB DRILLS

l2 l1

d1 mm 4.200 4.300 4.370 4.400 4.500 4.570 4.600 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.560 5.600 5.700 5.800 5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.800 6.900 7.000 7.100 7.140 7.200

Inch

11/64

3/16

13/64

7/32

15/64

1/4

9/32

55.00 58.00 58.00 58.00 58.00 58.00 58.00 58.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 74.00 74.00 74.00 74.00 74.00 74.00

22.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 34.00 34.00 34.00 34.00 34.00 34.00

AVAILABILITY • • •

• • • • •

steam tempered

nitrided lands

•

• • • • • •

•

• •

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

• • •

TiN

TiAlN

•

• • • •

• • • • • • • • • •

• •

•

• • • • •

• •

•

• • •

• •

•

• • •

•

• • m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

STUB DRILLS DRILLS

Guhring no.

223

5520

Standard Tool material

HSS

730

2463

HSCO

Solid carbide

GU500DZ

GT80

118°

130°

GV120

130°

118°

right-hand

Point angle

5516

DIN 6539

Cutting direction Tolerance

659

>Ø 2,36

Surface Type

1228

DIN 1897

l2 l1

d1 mm 7.300 7.400 7.500 7.600 7.700 7.800 7.900 7.940 8.000 8.100 8.200 8.300 8.400 8.500 8.600 8.700 8.730 8.800 8.900 9.000 9.100 9.200 9.300 9.400 9.500 9.600 9.700 9.800 9.900 10.000 10.200 10.300 10.500 10.720 10.800 11.000 11.110 11.500 11.800

Inch

5/16

11/32

27/64

7/16

74.00 74.00 74.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 95.00 95.00 95.00 95.00 95.00 95.00

34.00 34.00 34.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 43.00 43.00 43.00 43.00 43.00 43.00 43.00 43.00 47.00 47.00 47.00 47.00 47.00 47.00

AVAILABILITY

•

• •

•

• • • • • • • • • • • • • • • • • •

bright

steam tempered

nitrided lands

• • • • •

•

• • •

• •

•

• • • •

•

• •

•

• • • •

•

• • • •

• •

• • • • • • •

• • • • •

•

• •

•

• •

• • •

• • Australian stock item

• •

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

223

5520

Standard Tool material

HSS

730

2463

HSCO

Solid carbide

GU500DZ

GT80

118°

130°

GV120

130°

118°

right-hand

Point angle

5516

DIN 6539

Cutting direction Tolerance

659

>Ø 2,36

Surface Type

1228

DIN 1897

DRILLS

STUB DRILLS

l2 l1

Inch

11.910 12.000 12.300 12.500 12.700 12.800 13.000 13.100 13.500 14.000 14.500 15.000 15.500 15.870 16.000 16.500 17.000 17.500 18.000 18.500 19.000 19.500 20.000

15/32

102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 107.00 107.00 111.00 111.00 115.00 115.00 115.00 119.00 119.00 123.00 123.00 127.00 127.00 131.00 131.00

51.00 51.00 51.00 51.00 51.00 51.00 51.00 51.00 54.00 54.00 56.00 56.00 58.00 58.00 58.00 60.00 60.00 62.00 62.00 64.00 64.00 66.00 66.00

31/64

33/64

5/8

AVAILABILITY •

• • •

•

steam tempered

nitrided lands

•

• • •

• •

• • •

• • • •

•

TiN

• • • • •

• • • • • • • • •

• Australian stock item

bright

•

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

JOBBER DRILLS DRILLS

Guhring no.

205

9651

Standard Tool material

HSS

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

GU500DZ GU500DZ GT 100

118°

130°

Solid carbide N

130°

118°

right-hand

Point angle

658

HSS

Cutting direction Tolerance

5522

>Ø 2,36

Surface Type

5523 DIN 338

l2 l1

Inch

0.400 0.500 0.600 0.700 0.800 0.900 1.000 1.100 1.200 1.300 1.400 1.500 1.590 1.600 1.700 1.800 1.900 1.980 2.000 2.100 2.200 2.300 2.380 2.400 2.500 2.600 2.700 2.780 2.800 2.900 3.000 3.100 3.170 3.200 3.300 3.400 3.500 3.570 3.600

1/64

20.00 22.00 24.00 28.00 30.00 32.00 34.00 36.00 38.00 38.00 40.00 40.00 43.00 43.00 43.00 46.00 46.00 49.00 49.00 49.00 53.00 53.00 57.00 57.00 57.00 57.00 61.00 61.00 61.00 61.00 61.00 65.00 65.00 65.00 65.00 70.00 70.00 70.00 70.00

5.00 6.00 7.00 9.00 10.00 11.00 12.00 14.00 16.00 16.00 18.00 18.00 20.00 20.00 20.00 22.00 22.00 24.00 24.00 24.00 27.00 27.00 30.00 30.00 30.00 30.00 33.00 33.00 33.00 33.00 33.00 36.00 36.00 36.00 36.00 39.00 39.00 39.00 39.00

1/16

5/64

3/32

7/64

1/8

9/64

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

• • • • • •

• • • •

• • • • • •

• • •

• • • •

• • • • • • • • •

• • • •

• • • • • • • • • • •

• • • •

• • • • • • • • • • •

• • • • • • m

•

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • •

• • • • • • • • • •

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

205

9651

Standard Tool material

HSS

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

GU500DZ GU500DZ GT 100

118°

130°

Solid carbide N

130°

118°

right-hand

Point angle

658

HSS

Cutting direction Tolerance

5522

>Ø 2,36

Surface Type

5523 DIN 338

DRILLS

JOBBER DRILLS

l2 l1

d1 mm 3.700 3.800 3.900 3,970 4.000 4.100 4.200 4.300 4.370 4.400 4.500 4.600 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.560 5.600 5.700 5.800 5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.750

Inch

5/32

11/64

3/16

13/64

7/32

15/64

1/4

17/64

70.00 75.00 75.00 75.00 75.00 75.00 75.00 80.00 80.00 80.00 80.00 80.00 80.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 109.00

39.00 43.00 43.00 43.00 43.00 43.00 43.00 47.00 47.00 47.00 47.00 47.00 47.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 57.00 57.00 57.00 57.00 57.00 57.00 57.00 57.00 57.00 63.00 63.00 63.00 63.00 63.00 63.00 63.00 63.00 69.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

• •

• • •

• • • • •

• • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • • • • • •

• •

• • • • • •

• • • • • • •

• • •

• •

• • • • • • • •

• • • • • • • • •

•

• • •

• • • • • • • • • • • • •

• • • •

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

JOBBER DRILLS DRILLS

Guhring no.

205

9651

Standard Tool material

HSS

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

GU500DZ GU500DZ GT 100

118°

130°

Solid carbide N

130°

118°

right-hand

Point angle

658

HSS

Cutting direction Tolerance

5522

>Ø 2,36

Surface Type

5523 DIN 338

l2 l1

d1 mm 6.800 6.900 7.000 7.100 7.140 7.200 7.300 7.400 7.500 7.540 7.600 7.700 7.800 7.900 7.940 8.000 8.100 8.200 8.300 8.330 8.400 8.500 8.600 8.700 8.730 8.800 8.900 9.000 9.100 9.130 9.200 9.300 9.400 9.500 9.520 9.600 9.700 9.800 9.900

Inch

9/32

19/64

5/16

21/64

11/32

23/64

3/8

109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 133.00 133.00 133.00 133.00 133.00

69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 87.00 87.00 87.00 87.00 87.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

•

• • • • • • • • •

• • • • •

• • •

• • • • • • • • • •

• •

• • • • • • • • •

• • • •

• • •

•

• •

• • • • • • • •

• •

• • •

• • • •

• • • • •

•

• • •

• • • • •

•

• •

•

• •

• • • • • • • • • • • •

• • •

•

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

205

9651

Standard Tool material

HSS

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

GU500DZ GU500DZ GT 100

118°

130°

Solid carbide N

130°

118°

right-hand

Point angle

658

HSS

Cutting direction Tolerance

5522

>Ø 2,36

Surface Type

5523 DIN 338

DRILLS

JOBBER DRILLS

l2 l1

Inch

9.920 10.000 10.100 10.200 10.300 10.320 10.400 10.500 10.600 10.700 10.720 10.800 10.900 11.000 11.100 11.110 11.200 11.300 11.400 11.500 11.510 11.600 11.700 11.800 11.900 11.910 12.000 12.100 12.200 12.300 12.400 12.500 12.600 12.700 12.800 12.900 13.000 13.500 14.000

25/64

133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 160.00 160.00

87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 108.00 108.00

13/32

27/64

7/16

29/64

15/32

31/64

1/2

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

steam tempered

nitrided lands

TiN

•

• • • • • •

• •

•

• • • •

• •

•

• •

•

• •

•

• •

• • •

•

• • •

•

• • •

• •

•

• • • • •

• Australian stock item

bright

• •

TiAlN

• •

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

JOBBER DRILLS DRILLS

Guhring no.

205

9651

Standard Tool material

HSS

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

GU500DZ GU500DZ GT 100

118°

130°

Solid carbide N

130°

118°

right-hand

Point angle

658

HSS

Cutting direction Tolerance

5522

>Ø 2,36

Surface Type

5523 DIN 338

l2 l1

Inch

14.290 14.500 15.000 15.200 15.500 16.000

9/16

169.00 169.00 169.00 178.00 178.00 178.00

114.00 114.00 114.00 120.00 120.00 120.00

AVAILABILITY • • • • • •

• • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

•

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

217

5536

Standard

5537

DIN 340

Tool material

HSS

HSCO

GU 500 DZ

right-hand

118º

DRILLS

LONG SERIES TWIST DRILLS

>Ø 2,36

Surface Type Cutting direction

Point angle

l2 l1

d1 mm 1.000 1.500 2.000 2.500 2.700 2.800 3.000 3.170 3.300 3.400 3.500 3.570 3.800 3.900 3.970 4.000 4.200 4.300 4.370 4.500 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.560 5.700 5.800 5.950 6.000 6.300 6.350 6.500

Inch

1/8

9/64

5/32

11/64

3/16

13/64

7/32

15/64

1/4

56.00 70.00 85.00 95.00 100.00 100.00 100.00 106.00 106.00 112.00 112.00 112.00 119.00 119.00 119.00 119.00 119.00 126.00 126.00 126.00 126.00 132.00 132.00 132.00 132.00 132.00 132.00 132.00 132.00 139.00 139.00 139.00 139.00 139.00 139.00 139.00 148.00 148.00 148.00

33.00 45.00 56.00 62.00 66.00 66.00 66.00 69.00 69.00 73.00 73.00 73.00 78.00 78.00 78.00 78.00 78.00 82.00 82.00 82.00 82.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 97.00 97.00 97.00

AVAILABILITY • • • • • • • • • • • •

steam tempered

nitrided lands

• • • • • • • • • •

m m

• • •

• •

m m m m m

m m m

m m

m m m

m m

• • • •

m m

• m

m m m m

• • • •

m m m

• •

• • • m

• •

•

• Australian stock item

bright

TiN

TiAlN

m m m m

m m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

LONG SERIES TWIST DRILLS DRILLS

Guhring no.

217

5536

Standard

5537

DIN 340

Tool material

HSS

HSCO

GU 500 DZ

right-hand

118º

>Ø 2,36

Surface Type Cutting direction

Point angle

l2 l1

d1 mm 6.700 6.750 6.800 6.900 7.000 7.200 7.500 7.540 7.940 8.000 8.100 8.500 8.700 8.730 9.000 9.500 9.520 9.700 9.800 9.900 10.000 10.200 10.300 10.500 11.000 11.500 12.000 12.500 12.700 13.000 13.500 14.000

Inch 17/64

19/64 5/16

11/32

3/8

1/2

148.00 156.00 156.00 156.00 156.00 156.00 156.00 165.00 165.00 165.00 165.00 165.00 175.00 175.00 175.00 175.00 184.00 184.00 184.00 184.00 184.00 184.00 184.00 184.00 195.00 195.00 205.00 205.00 205.00 205.00 214.00 214.00

97.00 102.00 102.00 102.00 102.00 102.00 102.00 109.00 109.00 109.00 109.00 109.00 115.00 115.00 115.00 115.00 121.00 121.00 121.00 121.00 121.00 121.00 121.00 121.00 128.00 128.00 134.00 134.00 134.00 134.00 140.00 140.00

AVAILABILITY • •

bright

steam tempered

nitrided lands

• • • • •

• m

•

m m m m m

• •

• • • •

• m

m m m m

• •

m m

• • • • •

• • • • • • •

• • • • •

m m m

•

• Australian stock item

•

TiN

TiAlN

• • •

m m m m m m m m m m m

m m m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

502

618

Standard

DIN 1869

Tool material

HSS

HSCO

Surface

>Ø 2,36

Type

GT 100

right-hand

130º

Cutting direction

Point angle

DRILLS

EXTRA LENGTH TWIST DRILLS, SERIES 1

l2 l1

d1 mm 3.000 3.170 3.500 3.570 3.970 4.000 4.200 4.370 4.500 4.760 5.000 5.160 5.500 5.560 5.950 6.000 6.350 6.500 6.750 6.800 7.000 7.500 7.540 7.940 8.000 8.500 8.730 9.000 9.500 9.520 10.000 10.500 11.000 11.500 12.000 12.500 12.700 13.000

Inch 1/8 9/64 5/32

11/64 3/16 13/64 7/32 15/64 1/4 17/64

19/64 5/16

11/32

3/8

1/2

150.00 155.00 165.00 165.00 175.00 175.00 175.00 185.00 185.00 195.00 195.00 195.00 205.00 205.00 205.00 205.00 215.00 215.00 225.00 225.00 225.00 225.00 240.00 240.00 240.00 240.00 250.00 250.00 250.00 265.00 265.00 265.00 280.00 280.00 295.00 295.00 295.00 295.00

100.00 105.00 115.00 115.00 120.00 120.00 120.00 125.00 125.00 135.00 135.00 135.00 140.00 140.00 140.00 140.00 150.00 150.00 155.00 155.00 155.00 155.00 165.00 165.00 165.00 165.00 175.00 175.00 175.00 185.00 185.00 185.00 195.00 195.00 205.00 205.00 205.00 205.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

m m m m m m m m m m m m m m

m m m m m m m m m m m m m m m m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

EXTRA LENGTH TWIST DRILLS, SERIES 2 DRILLS

Guhring no.

503

619

Standard

DIN 1869

Tool material

HSS

HSCO

Surface

>Ø 2,36

Type

GT 100

right-hand

130º

Cutting direction

Point angle

l2 l1

d1 mm 2.000 3.000 3.170 3.500 3.570 3.970 4.000 4.370 4.760 5.000 5.160 5.500 6.000 6.350 6.500 7.000 7.140 7.500 7.940 8.000 8.330 8.730 9.000 9.520 10.000 10.720 11.000 11.110 12.000 12.700 13.000

Inch

1/8 9/64 5/32 11/64 3/16 13/64

1/4

9/32 5/16 21/64 11/32 3/8 27/64 7/16 1/2

160.00 190.00 200.00 210.00 210.00 220.00 220.00 235.00 245.00 245.00 245.00 260.00 260.00 275.00 275.00 290.00 290.00 290.00 305.00 305.00 305.00 320.00 320.00 340.00 340.00 365.00 365.00 365.00 375.00 375.00 375.00

110.00 130.00 135.00 145.00 145.00 150.00 150.00 160.00 170.00 170.00 170.00 180.00 180.00 190.00 190.00 200.00 200.00 200.00 210.00 210.00 210.00 220.00 220.00 235.00 235.00 250.00 250.00 250.00 260.00 260.00 260.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

m m m m m m m m m

m m m m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

EXTRA LENGTH TWIST DRILLS, SERIES 3 Guhring no.

DRILLS

504

Standard

DIN 1869

Tool material

HSS

Surface Type

GT 100

Cutting direction

right-hand

Point angle

130º

l2 l1

d1 mm 3.000 3.170 3.500 3.970 4.000 4.370 4.760 5.000 5.500 6.000 6.350 6.500 6.750 7.000 7.140 7.500 7.940 8.000 8.330 8.730 9.000 9.520 10.000 10.320 10.500 11.000 11.110 12.000 13.000

Inch 1/8 5/32 11/64 3/16

1/4 17/64 9/32 5/16 21/64 11/32 3/8 13/32

7/16

240.00 250.00 265.00 280.00 280.00 295.00 315.00 315.00 330.00 330.00 350.00 350.00 370.00 370.00 370.00 370.00 390.00 390.00 390.00 410.00 410.00 430.00 430.00 430.00 430.00 455.00 455.00 480.00 480.00

160.00 170.00 180.00 190.00 190.00 200.00 210.00 210.00 225.00 225.00 235.00 235.00 250.00 250.00 250.00 250.00 265.00 265.00 265.00 280.00 280.00 295.00 295.00 295.00 295.00 310.00 310.00 330.00 330.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

EXTRA LENGTH TWIST DRILLS DRILLS

Guhring no.

242

243

Standard

244

Guhring std.

Tool material

HSS

Surface Type Cutting direction

GT 100

right-hand

130º

Point angle

GT 100

l2 l1

6.000 8.000 10.000 11.000 12.000

500.00 500.00 600.00 600.00 600.00

400.00 400.00 500.00 500.00 500.00

8.000 10.000 11.000 12.000

750.00 750.00 750.00 750.00

650.00 650.00 650.00 650.00

10.000 11.000 12.000

1000.00 1000.00 1000.00

850.00 850.00 850.00

AVAILABILITY • • • • • • • • •

• • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard Tool material

581

736

DIN 333

Guhring std.

HSS

Solid Carbide

right-hand

118º

DRILLS

CENTRE DRILLS

Surface Form Cutting direction

60 o

Point angle

size

1 2 3 4 5 6

0.500 0.800 1.000 1.250 1.600 2.000 2.500 3.150 4.000 5.000 6.300

3.150 3.150 3.150 3.150 4.000 5.000 6.300 8.000 10.000 12.500 16.000

25.00 25.00 31.50 31.50 35.50 40.00 45.00 50.00 56.00 63.00 71.00

AVAILABILITY • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

• • •

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MICRO-PRECISION DRILLS WITHOUT OIL FEED DRILLS

Guhring no. Standard Tool material

301

701

DIN 1899

Guhring std.

HSS-E-PM

Solid Carbide

right-hand

0/-0,004

118º

130º

Surface Type Cutting direction Tolerance

Point angle

l2 l1

0.100 0.180 0.200 0.300 0.400 0.500 0.600 0.700 0.800 0.900 1.000 1.100 1.200 1.300 1.400 1.500 1.600 1.700 1.800 1.900

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00

25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 30.00 30.00 30.00 30.00 30.00

0.50 1.10 1.50 1.90 3.00 3.40 3.90 4.20 5.30 6.00 6.80 7.60 8.50 8.50 9.50 9.50 10.60 10.60 11.80 11.80

AVAILABILITY • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

• • • • • • • • m m m m m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MICRO-PRECISION DRILLS WITH OIL FEED Guhring no.

Guhring std.

Tool material

Solid Carbide

DRILLS

6408

Standard Surface Type

Drilling depth

8xD

Cutting direction

right-hand

Tolerance

Point anlge

135º

l2 l1

1.400 1.500 1.600 1.700 1.800 1.900 2.000 2.100 2.200 2.300 2.400 2.500 2.600 2.700 2.800 2.900 3.000

4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00

52.00 52.00 52.00 56.00 56.00 56.00 56.00 62.00 62.00 62.00 62.00 62.00 66.00 66.00 66.00 66.00 66.00

15.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 28.00 29.00 30.00 31.00 32.00 33.00

AVAILABILITY • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

90º NC-SPOTTING DRILLS DRILLS

Guhring no.

557

568

557F

Standard

1133

723

HSCO

Solid Carbide

Guhring std.

Tool material

HSS

Surface Type Cutting direction

right-hand

Point angle

90º

•

• • •

•

• • •

• •

•

right-hand

Tolerance

l2 l1

d1 mm 3.000 4.000 5.000 6.000 6.350 8.000 9.520 10.000 12.000 12.700 15.870 16.000 19.050 20.000 25.000 25.400

Inch

1/4 3/8

1/2 5/8 3/4 63/64 1

46.00 55.00 62.00 66.00 70.00 79.00 89.00 89.00 102.00 102.00 115.00 115.00 131.00 131.00 151.00 156.00

12.00 12.00 14.00 16.00 17.00 21.00 25.00 25.00 30.00 30.00 37.50 37.50 45.00 45.00 53.00 53.00

AVAILABILITY • • • • • • • • • • • • • • • •

• m

bright

steam tempered

nitrided lands

TiN

• m

•

• • • • • • • • •

• Australian stock item

•

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

380

5003

Standard

Guhring std.

Tool material

HSS

Solid Carbide

Type

Form

for tapping size holes

right-hand

118º

DRILLS

STRAIGHT SHANK SHORT STEP DRILLS

Surface

Cutting direction

90 o

Point angle

118o d2 d1

l3 l2 l1

for

Code (mm)

thread

3.400 2.500 3.400 52.00 4.500 3.300 4.500 58.00 5.500 4.200 5.500 66.00 6.600 5.000 6.600 70.00 9.000 6.800 9.000 84.00 11.000 8.500 11.000 95.00 13.500 10.200 13.500 107.00

20.00 24.00 28.00 31.00 40.00 47.00 54.00

8.80 11.40 13.60 16.50 21.00 25.50 30.00

M3 M4 M5 M6 M8 M10 M12

3.400 4.500 5.500 6.600 9.000 11.000 13.500 14.000 16.000

20.00 27.00 27.00 31.00 40.00 47.00 53.00 60.00 65.00

8.80 11.40 13.60 16.50 21.00 25.50 30.00 34.50 38.50

M3 M4 M5 M6 M8 M10 M12 M14 M16

2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00

4.00 4.50 6.00 8.00 10.00 12.00 14.00 14.00 16.10

52.00 63.00 63.00 80.00 80.00 100.00 100.00 108.00 108.00

AVAILABILITY • • • • • • •

• • • • • • • • • Other sizes available on request

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK TWIST DRILLS DRILLS

Guhring no.

245

Standard

DIN 345

Tool material

HSS >Ø 2,36

Surface Type

Cutting direction

right-hand

Tolerance

Point angle

118º

MT l1

d1 mm 13.000 13.500 14.000 14.250 14.290 14.500 15.000 15.080 15.500 15.750 15.800 15.870 16.000 16.270 16.500 16.750 17.000 17.460 17.500 17.860 18.000 18.250 18.500 18.650 19.000 19.050 19.500 19.840 20.000 20.500 20.640 21.000 21.430 21.500 22.000 22.220 22.250 22.500 23.000

MT inch

9/16

19/32

5/8 41/64

45/64

47/64 3/4 25/32

13/16 27/32

7/8

1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

182.00 189.00 189.00 212.00 212.00 212.00 212.00 218.00 218.00 218.00 218.00 218.00 218.00 223.00 223.00 223.00 223.00 228.00 228.00 228.00 228.00 233.00 233.00 233.00 233.00 238.00 238.00 238.00 238.00 243.00 243.00 243.00 248.00 248.00 248.00 248.00 248.00 253.00 253.00

101.00 108.00 108.00 114.00 114.00 114.00 114.00 120.00 120.00 120.00 120.00 120.00 120.00 125.00 125.00 125.00 125.00 130.00 130.00 130.00 130.00 135.00 135.00 135.00 135.00 140.00 140.00 140.00 140.00 145.00 145.00 145.00 150.00 150.00 150.00 150.00 150.00 155.00 155.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • m

• • • • • • • m

• • m

• m

• • • • • • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK TWIST DRILLS Guhring no.

DRILLS

245

Standard

DIN 345

Tool material

HSS >Ø 2,36

Surface Type

Cutting direction

right-hand

Tolerance

Point angle

118º

MT l1

d1 mm 23.500 23.810 24.000 24.500 25.000 25.400 25.500 26.000 26.190 26.500 27.000 27.500 28.000 28.500 28.570 29.000 29.500 30.000 30.160 30.500 31.000 31.500 31.750 32.000 33.000 34.000 35.000 36.000 37.310 38.000 38.100 40.000 41.000 42.000 43.000 44.000 45.000 48.000 50.000

MT inch 15/16

63/64 1

1 1/32

1 1/8

1 3/16

1 1/4

1 15/32 1 1/2

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

276.00 281.00 281.00 281.00 281.00 286.00 286.00 286.00 286.00 286.00 291.00 291.00 291.00 296.00 296.00 296.00 296.00 296.00 301.00 301.00 301.00 301.00 306.00 334.00 334.00 339.00 339.00 344.00 344.00 349.00 349.00 349.00 354.00 354.00 359.00 359.00 359.00 369.00 369.00

155.00 160.00 160.00 160.00 160.00 165.00 165.00 165.00 165.00 165.00 170.00 170.00 170.00 175.00 175.00 175.00 175.00 175.00 180.00 180.00 180.00 180.00 185.00 185.00 185.00 190.00 190.00 195.00 195.00 200.00 200.00 200.00 205.00 205.00 210.00 210.00 210.00 220.00 220.00

AVAILABILITY • m

• • • • • • m

• • • • • m

• • • m

• • • • • • • • • m

• m

• • • • • • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK ARMOUR PIERCING DRILLS DRILLS

Guhring no.

363

Standard

Guhring std.

Tool material

HSCO

Surface Type

GV120

Cutting direction

right-hand

Tolerance

Point angle

130º

MT l1

mm 13.000 13.500 14.000 14.500 15.000 15.500 16.000 16.500 17.000 17.500 18.000 18.500 19.000 20.000 20.500 21.000 21.500 22.000 23.000 24.000 25.000 26.000 27.000 28.000 29.000 30.000 32.000

1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4

147.00 168.00 168.00 172.00 172.00 176.00 176.00 179.00 179.00 183.00 183.00 186.00 186.00 212.00 216.00 216.00 219.00 219.00 222.00 225.00 225.00 256.00 259.00 259.00 263.00 263.00 269.00

66.00 70.00 70.00 74.00 74.00 78.00 78.00 81.00 81.00 85.00 85.00 88.00 88.00 91.00 95.00 95.00 98.00 98.00 101.00 104.00 104.00 107.00 110.00 110.00 114.00 114.00 120.00

AVAILABILITY m m

• m

• • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK LONG SERIES TWIST DRILLS Guhring no.

DRILLS

257

Standard

DIN 341

Tool material

HSS

Surface Type

Cutting direction

right-hand

Tolerance

Point angle

118º

MT l1

mm 13.00 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00

1 1 1 2 2 2 2 2 2 2 2 2 2 2 2

215.00 223.00 223.00 245.00 245.00 251.00 251.00 257.00 257.00 263.00 263.00 269.00 269.00 275.00 275.00

134.00 142.00 142.00 147.00 147.00 153.00 153.00 159.00 159.00 165.00 165.00 171.00 171.00 177.00 177.00

AVAILABILITY • m

• m

•

Other sizes are available on request

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK EXTRA LENGTH TWIST DRILLS DRILLS

Guhring no.

526

527

Standard

565

DIN 1870

Tool material

HSS

Surface

>Ø 16,0

Type

GT 100

right-hand

130º

Cutting direction Tolerance

Point angle

MT l1

12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

1 1 1 2 2 2 2 2 2

310.00 310.00 325.00 340.00 355.00 355.00 370.00 370.00 385.00

205.00 205.00 220.00 220.00 230.00 230.00 245.00 245.00 260.00

12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

1 1 1 2 2 2 2 2 2

395.00 395.00 410.00 425.00 445.00 445.00 465.00 465.00 490.00

260.00 260.00 275.00 275.00 295.00 295.00 310.00 310.00 325.00

10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000

1 1 1 1 1 2 2 2

425.00 425.00 425.00 425.00 425.00 425.00 425.00 425.00

345.00 345.00 345.00 345.00 345.00 325.00 325.00 325.00

AVAILABILITY • • • • • • • • •

• • • • • • • • •

• • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

293

298

Standard

299

Guhring std.

Tool material

HSS

Surface

>Ø 16,0

Type

GT 100

right-hand

130º

Cutting direction Tolerance

Point angle

DRILLS

TAPER SHANK EXTRA LENGTH TWIST DRILLS

MT l1

14.000 15.000 16.000 17.000 18.000 19.000 20.000 21.000 22.000 23.000 24.000 25.000

1 2 2 2 2 2 2 2 2 2 3 3

600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00

500.00 500.00 500.00 500.00 500.00 500.00 500.00 500.00 500.00 500.00 475.00 475.00

14.000 15.000 16.000 18.000

1 2 2 2

750.00 750.00 750.00 750.00

650.00 650.00 650.00 650.00

14.000 15.000 16.000 18.000

1 2 2 2

1000.00 1000.00 1000.00 1000.00

850.00 850.00 850.00 850.00

AVAILABILITY • • • • • • • • • • • •

• • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK OIL FEED DRILLS DRILLS

Guhring no.

270

Standard

Guhring std.

Tool material

HSS

Surface Type

Cutting direction

right-hand

Tolerance

Point angle

118º

end coolant supply l2

MT l1

mm 10.000 12.000 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000

2 2 2 2 2 3 3 3 3 4

233.00 251.00 259.00 270.00 282.00 313.00 327.00 342.00 350.00 385.00

116.00 134.00 142.00 153.00 165.00 177.00 191.00 206.00 214.00 222.00

AVAILABILITY • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TAPER SHANK OIL FEED DRILLS Guhring no.

DRILLS

1101

Standard

Guhring std.

Tool material

HSS

Surface Type

Cutting direction

right-hand

Tolerance

Point angle

118º

taper radial coolant supply l2

MT l1

mm 12.000 14.000 16.000 18.000 19.000 20.000 22.000 26.000 28.000

2 2 2 2 2 2 2 3 3

241.00 249.00 260.00 272.00 278.00 284.00 298.00 340.00 348.00

134.00 142.00 153.00 165.00 171.00 177.00 191.00 214.00 222.00

AVAILABILITY • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE RATIO DRILLS, 3 X D DRILLS

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type

RT 100 U

right-hand

Drilling depth

3xD

Point angle

140°

Cutting direction

Tolerance

l2 l1

d1 mm

inch

3.000 3.100 3.170 3.200 3.250 3.300 3.400 3.500 3.570 3.600 3.700 3.800 3.900 3.970 4.000 4.100 4.200 4.300 4.370 4.400 4.500 4.600 4.650 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.550 5.560 5.600 5.700 5.800

1/8

9/64

5/32

11/64

3/16

13/64

7/32

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000

62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00

20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

• m

• m m m m m m m

• m m m

• m m m m m m m m m m m m

• m m m m m m m m m m

• m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

DRILLS

HIGH-PERFORMANCE RATIO DRILLS, 3 X D

Surface Type

RT 100 U

right-hand

Drilling depth

3xD

Point angle

140°

Cutting direction

Tolerance

l2 l1

d1 mm

inch

5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.750 6.800 6.900 7.000 7.100 7.140 7.200 7.300 7.400 7.500 7.540 7.600 7.700 7.800 7.900 7.940 8.000 8.100 8.200 8.300 8.330 8.400 8.500 8.600 8.700 8.730 8.800 8.900

15/64

1/4

17/64

9/32

19/64

5/16

21/64

11/32

6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000

66.00 66.00 66.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00

28.00 28.00 28.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

m m

• m m m

• m m m m m m m

• m m m m

• m m m m m m m

• m

• m m m m m m m

• • m

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE RATIO DRILLS, 3 X D DRILLS

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type

RT 100 U

right-hand

Drilling depth

3xD

Point angle

140°

Cutting direction

Tolerance

l2 l1

d1 mm

inch

9.000 9.100 9.130 9.200 9.250 9.300 9.400 9.500 9.520 9.600 9.700 9.800 9.900 9.920 10.000 10.100 10.200 10.300 10.320 10.400 10.500 10.600 10.700 10.800 10.900 11.000 11.100 11.110 11.200 11.300 11.400 11.500 11.600 11.700 11.800 11.900 11.910 12.000 12.200

23/64

3/8

25/64

13/32

7/16

15/32

10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 14.000

89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 107.00

47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 60.00

40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • •

bright

steam tempered

nitrided lands

m m m m m m m m m m m m

• m m m m m m m

•

• •

• • • • • • •

TiN

TiAlN

• m m m m m m

• • •

• •

• Australian stock item

• m

•

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

DRILLS

HIGH-PERFORMANCE RATIO DRILLS, 3 X D

Surface Type

RT 100 U

right-hand

Drilling depth

3xD

Point angle

140°

Cutting direction

Tolerance

l2 l1

d1 mm

inch

12.500 12.700 12.800 13.000 13.500 13.700 14.000 14.200 14.290 14.500 14.700 15.000 15.100 15.200 15.500 15.700 16.000 16.100 16.500 16.900 17.000 17.500 18.000 18.500 19.000 19.500 20.000

1/2

9/16

14.000 14.000 14.000 14.000 14.000 14.000 14.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 18.000 18.000 18.000 18.000 18.000 18.000 20.000 20.000 20.000 20.000

107.00 107.00 107.00 107.00 107.00 107.00 107.00 115.00 115.00 115.00 115.00 115.00 115.00 115.00 115.00 115.00 115.00 123.00 123.00 123.00 123.00 123.00 123.00 131.00 131.00 131.00 131.00

60.00 60.00 60.00 60.00 60.00 60.00 60.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 73.00 73.00 73.00 73.00 73.00 73.00 79.00 79.00 79.00 79.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00 50.00

AVAILABILITY • • • • •

steam tempered

nitrided lands

m m

• m

•

• • • •

• m m m

• m

• •

•

• Australian stock item

bright

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE RATIO DRILLS, 5 X D DRILLS

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type

RT 100 U

right-hand

Drilling depth

5xD

Point angle

140º

Cutting direction

Tolerance

l2 l1

d1 mm

inch

1/8

9/64

5/32

11/64

3/16

13/64

7/32

66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00

28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00

AVAILABILITY • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • m

• • • m

• • m

• • • m

• • • • • m

• m

• m m

• • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

DRILLS

HIGH-PERFORMANCE RATIO DRILLS, 5 X D

Surface Type

RT 100 U

right-hand

Drilling depth

5xD

Point angle

140º

Cutting direction

Tolerance

l2 l1

d1 mm

inch

15/64

1/4

17/64

9/32

19/64

5/16

21/64

11/32

82.00 82.00 82.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00

44.00 44.00 44.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00

AVAILABILITY • • m

• m

• • m

• m

• • • • • • m m

• m

• • m m m

• m

• • m

• Australian stock item

bright

steam tempered

nitrided lands

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE RATIO DRILLS, 5 X D DRILLS

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type

RT 100 U

right-hand

Drilling depth

5xD

Point angle

140º

Cutting direction

Tolerance

l2 l1

d1 mm

inch

23/64

3/8

25/64

13/32

7/16

15/32

103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 124.00

61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 77.00

AVAILABILITY • m m m

• m

• • • m

• m m

• m

• m m

• m

• • m m

• m m

• • • Australian stock item

bright

steam tempered

nitrided lands

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

DRILLS

HIGH-PERFORMANCE RATIO DRILLS, 5 X D

Surface Type

RT 100 U

right-hand

Drilling depth

5xD

Point angle

140º

Cutting direction

Tolerance

l2 l1

d1 mm

inch

12.200 12.500 12.700 13.000 13.500 13.700 14.000 14.200 14.290 14.500 14.700 14.800 15.000 15.200 15.500 15.700 16.000 16.500 17.000 17.500 18.000 18.500 19.000 19.500 20.000

1/2

9/16

14.000 14.000 14.000 14.000 14.000 14.000 14.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 18.000 18.000 18.000 18.000 20.000 20.000 20.000 20.000

124.00 124.00 124.00 124.00 124.00 124.00 124.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 143.00 143.00 143.00 143.00 153.00 153.00 153.00 153.00

77.00 77.00 77.00 77.00 77.00 77.00 77.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 93.00 93.00 93.00 93.00 101.00 101.00 101.00 101.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00 50.00

AVAILABILITY • m

• • m

• m m

• m

• •

•

• •

• • •

•

m m

• Australian stock item

bright

steam tempered

nitrided lands

• • • • • • • • • • • •

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE RATIO DRILLS, 7 X D DRILLS

Guhring no.

5512

Standard

Guhring std.

Tool material

Solid carbide

Surface Type

RT 100 U

Cutting direction

right-hand

Tolerance

m7 7xD

Point angle

140º

Drilling depth

l2 l1

d1 mm

inch

4.000 4.600 5.000 5.200 5.500 5.560 5.800 5.950 6.000 6.350 6.500 6.750 6.800 7.000 7.140 7.500 7.540 7.800 7.940 8.000 8.330 8.500 8.730 9.000 9.130 9.500 9.520 9.800 10.000 10.200 10.320 10.500 11.000 11.110 11.500 11.910 12.000 12.500 12.700

1/4

3/8

1/2

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 14.000 14.000

75.00 85.00 90.00 90.00 97.00 97.00 97.00 97.00 97.00 106.00 106.00 106.00 106.00 116.00 116.00 116.00 116.00 116.00 116.00 116.00 131.00 131.00 131.00 131.00 131.00 139.00 139.00 139.00 139.00 155.00 155.00 155.00 155.00 163.00 163.00 163.00 163.00 182.00 182.00

37.50 45.00 50.00 50.00 57.00 57.00 57.00 57.00 57.00 66.00 66.00 66.00 66.00 76.00 76.00 76.00 76.00 76.00 76.00 76.00 87.00 87.00 87.00 87.00 87.00 95.00 95.00 95.00 95.00 106.00 106.00 106.00 106.00 114.00 114.00 114.00 114.00 133.00 133.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE RATIO DRILLS, 7 X D Guhring no.

Guhring std.

Tool material

Solid carbide

DRILLS

5512

Standard Surface Type

RT 100 U

Cutting direction

right-hand

Tolerance

m7 7xD

Point angle

140º

Drilling depth

l2 l1

d1 mm

inch

13.000 13.500 14.000 14.500 15.000 15.500 16.000

14.000 14.000 14.000 16.000 16.000 16.000 16.000

182.00 182.00 182.00 204.00 204.00 204.00 204.00

133.00 133.00 133.00 152.00 152.00 152.00 152.00

45.00 45.00 45.00 48.00 48.00 48.00 48.00

AVAILABILITY • m m m m m

•

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

RATIO DRILLS WITH OIL FEED, 12 X D DRILLS

Guhring no.

5525

Standard

Guhring std.

Tool material

Solid carbide

Carbide Grade

K/P

Surface Type

RT 100

Shank

Cutting direction

right-hand

Tolerance

Drilling depth

12 x D 140º

Point angle

l2 l1

3.000 3.170 3.200 3.500 4.000 4.500 5.000 5.200 5.500 6.000 6.350 6.500 6.800 7.000 7.500 8.000 8.500 9.000 9.500 10.000 10.500 11.000 11.500 12.000 12.500 12.700 13.000 13.500 14.000 14.500 15.000 15.500 16.000

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 14.000 14.000 14.000 14.000 14.000 16.000 16.000 16.000 16.000

90.00 90.00 90.00 90.00 102.00 102.00 116.00 116.00 116.00 116.00 146.00 146.00 146.00 146.00 146.00 146.00 162.00 162.00 162.00 162.00 204.00 204.00 204.00 204.00 230.00 230.00 230.00 230.00 230.00 260.00 260.00 260.00 260.00

50.00 50.00 50.00 50.00 64.00 64.00 78.00 78.00 78.00 78.00 108.00 108.00 108.00 108.00 108.00 108.00 120.00 120.00 120.00 120.00 156.00 156.00 156.00 156.00 182.00 182.00 182.00 182.00 182.00 208.00 208.00 208.00 208.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00

AVAILABILITY • • • m

• m m

• m

• m m m m m

• m m m

• m m m m m m m m

• Other sizes available on request

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

RATIO DRILLS WITH OIL FEED, 20 X D Guhring no.

Guhring std.

Tool material

Solid carbide

Carbide Grade

DRILLS

6511

Standard

K/P

Surface Type

RT 100 T

Shank

Cutting Direction

right-hand

Tolerance

Drilling depth

20 x D

Point angle

135º

l2 l1

3.000 4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 8.730 9.000 10.000 14.000

6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 14.000

110.00 136.00 158.00 158.00 180.00 180.00 202.00 202.00 223.00 223.00 249.00 249.00 249.00 271.00 367.00

70.00 96.00 118.00 118.00 140.00 140.00 162.00 162.00 183.00 183.00 205.00 205.00 205.00 227.00 318.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00 45.00

AVAILABILITY • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

RATIO DRILLS WITH OIL FEED, 30 X D DRILLS

Guhring no.

6513

Standard

Guhring std.

Tool material

Solid carbide

Carbide Grade

K/P

Surface Type

RT 100 T

Shank

Cutting Direction

right-hand

Tolerance

Drilling depth

30 x D

Point angle

135º

l2 l1

3.000 3.170 4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000 9.520 10.000

6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000

140.00 158.00 176.00 208.00 208.00 240.00 240.00 272.00 272.00 303.00 303.00 339.00 339.00 371.00 371.00

100.00 118.00 136.00 168.00 168.00 200.00 200.00 232.00 232.00 263.00 263.00 295.00 295.00 327.00 327.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00

AVAILABILITY • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

RATIO DRILLS WITH OIL FEED, 40 X D Guhring no.

Guhring std.

Tool material

Solid carbide

Carbide Grade

DRILLS

6514

Standard

K/P

Surface Type

RT 100 T

Shank

Cutting Direction

right-hand

Tolerance

Drilling depth

40 x D

Point angle

135º

l2 l1

3.000 4.000 5.000 5.500 6.000 6.500 7.000 7.500 8.000

6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000

170.00 216.00 258.00 280.00 300.00 322.00 342.00 363.00 383.00

130.00 176.00 218.00 240.00 260.00 282.00 302.00 323.00 343.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

AVAILABILITY • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 3 X D 4107

DRILLS

Guhring no.

DIN 6535-HE

h l2

l3 l1

Code no. 11,000 11,005 11,500 11,505 12,000 12,005 12,500 12,505 13,000 13,005 13,500 13,505 14,000 14,005 14,500 14,505 15,000 15,005 15,500 15,505 16,000 16,005 16,500 16,505 17,000 17,005 17,500 17,505 18,000 18,005 18,500 18,505 19,000 19,005 19,500 19,505 20,000 20,005 20,500

Holder Size 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190 190 195 195 200 200 205

incl. WP l1*

l2 max

11.00 - 11.49 11.00 - 11.49 11.50 - 11.99 11.50 - 11.99 12.00 - 12.49 12.00 - 12.49 12.50 - 12.99 12.50 - 12.99 13.00 - 13.49 13.00 - 13.49 13.50 - 13.99 13.50 - 13.99 14.00 - 14.49 14.00 - 14.49 14.50 - 14.99 14.50 - 14.99 15.00 - 15.49 15.00 - 15.49 15.50 - 15.99 15.50 - 15.99 16.00 - 16.49 16.00 - 16.49 16.50 - 16.99 16.50 - 16.99 17.00 - 17.49 17.00 - 17.49 17.50 - 17.99 17.50 - 17.99 18.00 - 18.49 18.00 - 18.49 18.50 - 18.99 18.50 - 18.99 19.00 - 19.49 19.00 - 19.49 19.50 - 19.99 19.50 - 19.99 20.00 - 20.49 20.00 - 20.49 20.50 - 20.99

12.00 12.70 12.00 12.70 12.00 12.70 14.00 15.875 14.00 15.875 14.00 15.875 14.00 15.875 16.00 15.875 16.00 15.875 16.00 15.875 16.00 15.875 18.00 19.05 18.00 19.05 18.00 19.05 18.00 19.05 20.00 19.05 20.00 19.05 20.00 19.05 20.00 19.05 25.00

10.70 10.70 11.20 11.20 11.70 11.70 12.20 12.20 12.70 12.70 13.20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70 18.70 19.20 19.20 19.70 19.70 20.20

101.00 101.00 103.00 103.00 106.00 106.00 108.00 108.00 110.00 110.00 113.00 113.00 115.00 115.00 120.00 120.00 123.00 123.00 125.00 125.00 127.00 127.00 130.00 130.00 132.00 132.00 134.00 134.00 137.00 137.00 141.00 141.00 143.00 143.00 146.00 146.00 148.00 148.00 159.00

36.60 36.60 38.10 38.10 39.70 39.70 41.30 41.30 42.90 42.90 44.60 44.60 46.20 46.20 47.80 47.80 49.30 49.30 50.90 59.90 52.90 52.90 54.10 54.10 55.80 55.80 57.40 57.40 58.90 58.90 60.50 60.50 62.10 62.10 63.70 63.70 65.30 65.30 67.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 56.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY • m

• m

German stock item

TiAlN SuperA

Guhring no.

4107

DRILLS

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 3 X D

DIN 6535-HE

h l2

l3 l1

Code no. 20,505 21,000 21,005 21,500 21,505 22,000 22,005 22,500 22,505 23,000 23,005 23,500 23,505 24,000 24,005 24,500 24,505 25,000 25,005 25,500 25,505 26,000 26,005 26,500 26,505 27,000 27,005 27,500 27,505 28,000 28,005 28,500 28,505 29,000 29,005 29,500 29,505 30,000 30,005

Holder Size 205 210 210 215 215 220 220 225 225 230 230 235 235 240 240 245 245 250 250 255 255 260 260 265 265 270 270 275 275 280 280 285 285 290 290 295 295 300 300

incl. WP l1*

l2 max

20.50 - 20.99 21.00 - 21.49 21.00 - 21.49 21.50 - 21.99 21.50 - 21.99 22.00 - 22.49 22.00 - 22.49 22.50 - 22.99 22.50 - 22.99 23.00 - 23.49 23.00 - 23.49 23.50 - 23.99 23.50 - 23.99 24.00 - 24.49 24.00 - 24.49 24.50 - 24.99 24.50 - 24.99 25.00 - 25.49 25.00 - 25.49 25.50 - 25.99 25.50 - 25.99 26.00 - 26.49 26.00 - 26.49 26.50 - 26.99 26.50 - 26.99 27.00 - 27.49 27.00 - 27.49 27.50 - 27.99 27.50 - 27.99 28.00 - 28.49 28.00 - 28.49 28.50 - 28.99 28.50 - 28.99 29.00 - 29.49 29.00 - 29.49 29.50 - 29.99 29.50 - 29.99 30.00 - 30.49 30.00 - 30.49

25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75

20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.20 22.70 22.70 23.20 23.20 23.70 23.70 24.20 24.20 24.70 24.70 25.20 25.20 25.70 25.70 26.20 26.20 26.70 26.70 27.20 27.20 27.70 27.70 28.20 28.20 28.70 28.70 29.20 29.20 29.70 29.70

159.00 161.00 161.00 163.00 163.00 165.00 165.00 168.00 168.00 170.00 170.00 173.00 173.00 175.00 175.00 177.00 177.00 180.00 180.00 187.00 187.00 191.00 191.00 193.00 193.00 196.00 196.00 198.00 198.00 200.00 200.00 202.00 202.00 205.00 205.00 207.00 207.00 210.00 210.00

67.00 68.60 68.60 70.10 70.10 71.70 71.70 73.30 73.30 74.9 74.90 76.50 76.50 78.10 78.10 79.70 79.70 81.30 81.30 82.9 82.90 84.00 84.00 86.10 86.10 87.20 87.20 88.90 88.90 90.40 90.40 92.50 92.50 94.60 94.60 95.10 95.10 96.70 96.70

56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m

• m

• m m m

• m

German stock item

TiAlN SuperA

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 3 X D 4107

DRILLS

Guhring no.

DIN 6535-HE

h l2

l3 l1

Code no. 30,500 30,505 31,000 31,005 31,500 31,505 32,000 32,005 33,000 33,005 34,000 34,005 35,000 35,005 36,000 36,005 37,000 37,005 38,000 38,005 39,000 39,005

Holder Size 305 305 310 310 315 315 320 320 330 330 340 340 350 350 360 360 370 370 380 380 390 390

incl. WP l1*

l2 max

30.50 - 30.99 30.50 - 30.99 31.00 - 31.49 31.00 - 31.49 31.50 - 31.99 31.50 - 31.99 32.00 - 32.99 32.00 - 32.99 33.00 - 33.99 33.00 - 33.99 34.00 - 34.99 34.00 - 34.99 35.00 - 35.99 35.00 - 35.99 36.00 - 36.99 36.00 - 36.99 37.00 - 37.99 37.00 - 37.99 38.00 - 38.99 38.00 - 38.99 39.00 - 40.00 39.00 - 40.00

32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75

30.20 30.20 30.70 30.70 31.20 31.20 31.70 31.70 32.70 32.70 33.70 33.70 34.70 34.70 35.70 35.70 36.70 36.70 37.70 37.70 38.70 38.70

212.00 212.00 214.00 214.00 216.00 216.00 221.00 221.00 226.00 226.00 230.00 230.00 235.00 235.00 240.00 240.00 245.00 245.00 249.00 249.00 254.00 254.00

98.30 98.30 99.80 99.80 101.40 101.40 104.60 104.60 107.80 107.80 111.00 111.00 114.20 114.20 117.30 117.30 120.50 120.50 123.70 123.70 126.90 126.90

60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m m

• m m m m m m m m m m m m m m m m m m m

German stock item

TiAlN SuperA

Guhring no.

4108

DRILLS

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 5 X D

DIN 6535-HE

h l2

l3 l1

Holder Size 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190 190 195 195 200 200 205

incl. WP l1*

l2 max

11.00 - 11.49 11.00 - 11.49 11.50 - 11.99 11.50 - 11.99 12.00 - 12.49 12.00 - 12.49 12.50 - 12.99 12.50 - 12.99 13.00 - 13.49 13.00 - 13.49 13.50 - 13.99 13.50 - 13.99 14.00 - 14.49 14.00 - 14.49 14.50 - 14.99 14.50 - 14.99 15.00 - 15.49 15.00 - 15.49 15.50 - 15.99 15.50 - 15.99 16.00 - 16.49 16.00 - 16.49 16.50 - 16.99 16.50 - 16.99 17.00 -17.49 17.00 - 17.49 17.50 - 17.99 17.50 - 17.99 18.00 - 18.49 18.00 - 18.49 18.50 - 18.99 18.50 - 18.99 19.00 - 19.49 19.00 - 19.49 19.50 - 19.99 19.50 - 19.99 20.00 - 20.49 20.00 - 20.49 20.50 - 20.99

10.70 10.70 11.20 110.20 11.70 11.70 12.20 12.20 12.70 12.70 13.20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70 18.70 19.20 19.20 19.70 19.70 20.20

124.00 124.00 127.00 127.00 131.00 131.00 134.00 134.00 137.00 137.00 141.00 141.00 144.00 144.00 150.00 150.00 154.00 154.00 157.00 157.00 160.00 160.00 164.00 164.00 167.00 167.00 170.00 170.00 174.00 174.00 179.00 179.00 182.00 182.00 186.00 186.00 189.00 189.00 201.00

59.60 59.60 62.10 62.10 64.70 64.70 67.30 67.30 69.90 69.90 72.60 72.60 75.20 75.20 77.80 77.80 80.30 80.30 82.90 82.90 85.90 85.90 88.10 88.10 90.80 90.80 93.40 .93.40 95.90 95.90 98.50 98.50 101.10 101.10 103.70 103.70 106.30 106.30 109.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 56.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY • m

• m

German stock item

TiAlN SuperA

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 5 X D 4108

DRILLS

Guhring no.

DIN 6535-HE

h l2

l3 l1

Code no. 20,505 21,000 21,005 21,500 21,505 22,000 22,005 22,500 22,505 23,000 23,005 23,500 23,505 24,000 24,005 24,500 24,505 25,000 25,005 25,500 25,505 26,000 26,500 27,000 27,500 28,000 28,500 29,000 29,500 30,000 30,500 31,000 31,500 32,000 33,000 34,000 35,000 36,000 37,000

Holder Size 205 210 210 215 215 220 220 225 225 230 230 235 235 240 240 245 245 250 250 255 255 260 265 270 275 280 285 290 295 300 305 310 315 320 330 340 350 360 370

incl. WP l1*

l2 max

20.50 - 20.99 21.00 - 21.49 21.00 - 21.49 21.50 - 21.99 21.50 - 21.99 22.00 - 22.49 22.00 - 22.49 22.50 - 22.99 22.50 - 22.99 23.00 - 23.49 23.00 - 23.49 23.50 - 23.99 23.50 - 23.99 24.00 - 24.49 24.00 - 24.49 24.50 - 24.99 24.50 - 24.99 25.00 - 25.49 25.00- 25.49 25.50 - 25.99 25.50 - 25.99 26.00 - 26.49 26.50 - 26.99 27.00 - 27.49 27.50 - 27.99 28.00 - 28.49 28.50 - 28.99 29.00 - 29.49 29.50 - 29.99 30.00 - 30.49 30.50 - 30.99 31.00 - 31.49 31.50 - 31.99 32.00 - 32.99 33.00 - 33.99 34.00 - 34.99 35.00 - 35.99 36.00 - 36.99 37.00 - 37.99

25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 32.00 31.75 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00

20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.20 22.70 22.70 23.20 23.20 23.70 23.70 24.20 24.20 24.70 24.70 25.20 25.20 25.70 26.20 26.70 27.20 27.70 28.20 28.70 29.20 29.70 30.20 30.70 31.20 31.70 32.70 33.70 34.70 35.70 36.70

201.00 204.00 204.00 207.00 207.00 210.00 210.00 214.00 214.00 217.00 217.00 221.00 221.00 224.00 224.00 227.00 227.00 231.00 231.00 239.00 239.00 244.00 247.00 251.00 254.00 257.00 260.00 264.00 267.00 271.00 274.00 277.00 280.00 287.00 294.00 300.00 307.00 314.00 321.00

109.00 111.60 111.60 114.10 114.10 116.70 116.70 119.30 119.30 121.90 121.90 124.50 124.50 127.10 127.10 129.70 129.70 132.30 132.30 134.90 134.90 137.00 140.00 142.20 144.80 147.40 150.40 153.50 155.10 157.60 160.20 162.80 165.40 170.60 175.80 181.00 186.20 191.30 196.50

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m

• m

• m m m

• m

• m m m m m

German stock item

TiAlN SuperA

Guhring no.

4108

DRILLS

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 5 X D

DIN 6535-HE

h l2

l3 l1

Code no. 38,000 39,000

Holder Size 380 390

incl. WP l1*

l2 max

38.00 - 38.99 39.00 - 40.00

32.00 32.00

37.70 38.70

327.00 334.00

201.70 206.90

60.00 60.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m m

German stock item

TiAlN SuperA

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 7 X D 4109

DRILLS

Guhring no.

DIN 6535-HE

h l2

l3 l1

Holder Size 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190 190 195 195 200 200 205

incl. WP l1*

l2 max

11.00 - 11.49 11.00 - 11.49 11.50 - 11.99 11.50 - 11.99 12.00 - 12.49 12.00 - 12.49 12.50 - 12.99 12.50 - 12.99 13.00 - 13.49 13.00 - 13.49 13.50 - 13.99 13.50 - 13.99 14.00 - 14.49 14.00 - 14.49 14.50 - 14.99 14.50 - 1499 15.00 - 15.49 15.00 - 15.49 15.50 - 15.99 15.50 - 15.99 16.00 - 16.49 16.00 - 16.49 16.50 - 16.99 16.50 - 16.99 17.00 - 17.49 17.00 - 17.49 17.50 - 17.99 17.50 - 17.99 18.00 - 18.49 18.00 - 18.49 18.50 - 18.99 18.50 - 18.99 19.00 - 19.49 19.00 - 19.49 19.50 - 19.99 19.50 - 19.99 20.00 - 20.49 20.00 - 20.49 20.50 - 20.99

10.70 10.70 11.20 11.20 11.70 11.70 12.20 12.20 12.70 12.70 1..20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70 18.70 19.20 19.20 19.70 19.70 20.20

147.00 147.00 151.00 151.00 156.00 156.00 160.00 160.00 164.00 164.00 169.00 169.00 173.00 173.00 180.00 180.00 185.00 185.00 189.00 189.00 193.00 193.00 198.00 198.00 202.00 202.00 206.00 206.00 211.00 211.00 217.00 217.00 221.00 222.00 226.00 226.00 230.00 230.00 243.00

82.60 82.60 86.10 86.10 89.70 89.70 93.30 93.30 96.90 96.90 100.60 100.60 104.20 104.20 107.80 107.80 111.30 111.30 114.90 114.90 118.90 118.90 122.10 122.10 125.80 125.80 129.40 129.40 132.90 132.90 136.50 136.50 140.10 140.10 143.70 143.70 147.30 147.30 151.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY • m

• m

German stock item

TiAlN SuperA

Guhring no.

4109

DRILLS

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 7 X D

DIN 6535-HE

h l2

l3 l1

Holder Size 205 210 210 215 215 220 220 225 225 230 230 235 235 240 240 245 245 250 250 255 255 260 260 265 265 270 270 275 275 280 280 285 285 290 290 295 295 300 300

incl. WP l1*

l2 max

243.00 247.00 247.00 251.00 251.00 255.00 255.00 260.00 260.00 264.00 264.00 269.00 269.00 273.00 273.00 277.00 277.00 282.00 282.00 291.00 291.00 297.00 297.00 301.00 301.00 306.00 306.00 310.00 310.00 314.00 314.00 318.00 318.00 323.00 323.00 327.00 327.00 332.00 332.00

151.00 154.60 154.60 158.10 158.10 161.70 161.70 165.30 165.30 168.90 168.90 172.50 172.50 176.10 176.10 179.70 179.70 183.30 183.30 186.90 186.90 190.00 190.00 194.00 194.00 197.20 197.20 200.80 200.80 204.40 204.40 208.40 208.40 212.50 212.50 215.10 215.10 218.60 218.60

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m

• m

• m m m

• m

German stock item

TiAlN SuperA

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 7 X D 4109

DRILLS

Guhring no.

DIN 6535-HE

h l2

l3 l1

Code no. 30,500 30,505 31,000 31,005 31,500 31,505

Holder Size 305 305 310 310 315 315

incl. WP l1*

l2 max

30.50 - 30.99 30.50 - 30.99 31.00 - 31.49 31.00 - 31.49 31.50 - 31.99 31.50 - 31.99

32.00 31.75 32.00 31.75 32.00 31.75

30.20 30.20 30.70 30.70 31.20 31.20

336.00 336.00 340.00 340.00 344.00 344.00

222.20 222.20 225.80 225.80 229.40 229.40

60.00 60.00 60.00 60.00 60.00 60.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m m

• m m m

German stock item

TiAlN SuperA

Guhring no.

4110

DRILLS

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 10 X D

DIN 6535-HE

h l2

l3 l1

Code no. 11.000 11.005 11.500 11.505 12.000 12.005 12.500 12.505 13.000 13.005 13.500 13.505 14.000 14.005 14.500 14.505 15.000 15.005 15.500 15.505 16.000 16.005 16.500 16.505 17.000 17.005 17.500 17.505 18.000 18.005 18.500 18.505 19.000 19.005 19.500 19.505 20.000 20.005 20.500

Holder Size 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190 190 195 195 200 200 205

incl. WP l1*

l2 max

182.00 182.00 187.00 187.00 194.00 194.00 199.00 199.00 205.00 205.00 211.00 211.00 217.00 217.00 225.00 225.00 232.00 232.00 237.00 237.00 243.00 243.00 249.00 249.00 255.00 255.00 260.00 260.00 267.00 267.00 274.00 274.00 280.00 280.00 286.00 286.00 292.00 292.00 306.00

117.10 117.10 122.10 122.10 127.20 127.20 132.30 132.30 137.50 137.50 142.50 142.50 147.70 147.70 152.80 152.80 157.80 157.80 162.90 162.90 168.00 168.00 173.10 173.10 178.30 178.30 183.50 183.50 188.40 188.40 193.50 193.50 198.70 198.70 203.70 203.70 208.90 208.90 214.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m

German stock item

TiAlN SuperA

TOOL HOLDERS FOR INTERCHANGEABLE INSERTS HT 800, 10 X D 4110

DRILLS

Guhring no.

DIN 6535-HE

h l2

l3 l1

Code no. 20.505 21.000 21.005 21.500 21.505 22.000 22.005 22.500 23.000 23.500 24.000 24.500 25.000 25.500 26.000 26.500 27.000 27.500 28.000 28.500 29.000 29.500 30.000 30.500 31.000 31.500

Holder Size 205 210 210 215 215 220 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 305 310 315

incl. WP l1*

l2 max

20.50 - 20.99 21.00 - 21.49 21.00 - 21.49 21.50 - 21.99 21.50 - 21.99 22.00 - 22.49 22.00 - 22.49 22.50 - 22.99 23.00 - 23.49 23.50 - 23.99 24.00 - 24.49 24.50 - 24.99 25.00 - 25.49 25.50 - 25.99 26.00 - 26.49 26.50 - 26.99 27.00 - 27.49 27.50 - 27.99 28.00 - 28.49 28.50 - 28.99 29.00 - 29.49 29.50 - 29.99 30.00 - 30.49 30.50 - 30.99 31.00 - 31.49 31.50 - 31.99

25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00

20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.70 23.20 23.70 24.20 24.70 25.20 25.70 26.20 26.70 27.20 27.70 28.20 28.70 29.20 29.70 30.20 30.70 31.20

306.00 312.00 312.00 317.00 317.00 323.00 323.00 329.00 335.00 341.00 347.00 352.00 359.00 369.00 377.00 382.00 388.00 394.00 400.00 405.00 412.00 418.00 424.00 429.00 435.00 441.00

214.00 219.10 219.10 224.20 224.20 229.30 229.30 234.40 239.50 244.60 249.70 254.80 259.90 265.00 270.00 275.00 280.10 285.20 290.30 295.40 300.50 305.60 310.60 315.70 320.80 325.90

56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

AVAILABILITY m m m m m m m m m m m m m m m m m m m m m m m m m m

German stock item

TiAlN SuperA

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Application

DRILLS

INTERCHANGEABLE INSERTS HT 800

Surface finish Tolerance

Point angle

140º

Code no. 11,000 11,200 11,500 11,510 11,700 11,800 11,910 12,000 12,100 12,200 12,300 12,500 12,600 12,700 12,800 12,900 13,000 13,100 13,490 13,500 13,600 13,700 13,800 13,890 14,000 14,100 14,290 14,400 14,500 14,600 14,680 14,700 14,800 15,000 15,080 15,100 15,200 15,300 15,480

for drill.

for pilot.

holder size

110 110 115 115 115 115 115 120 120 120 120 125 125 125 125 125 130 130 130 140 140 140 140 140 140 140 140 140 140 145 145 145 145 150 150 150 150 150 150

110 110 110 110 110 110 110 120 120 120 120 120 120 120 120 120 130 130 130 130 130 130 130 130 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140

11.00 11.20 11.50 11.51 11.70 11.80 11.91 12.00 12.10 12.20 12.30 12.50 12.60 12.70 12.80 12.90 13.00 13.10 13.49 13.50 13.60 13.70 13.80 13.89 14.00 14.10 14.29 14.40 14.50 14.60 14.68 14.70 14.80 15.00 15.08 15.10 15.20 15.30 15.48

2.10 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.80 2.80 2.80

4.50 4.50 4.50 4.50 4.50 4.50 4.50 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.50 5.50 5.50 5.50 5.50 5.50 5.50 5.50 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00

7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.70 7.70 7.70 7.70 7.70 7.70 7.70 7.70 7.70 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 9.60 9.60 9.60 9.60 9.60 9.60 9.60 9.60 9.60 9.80 9.80 9.80 9.80 9.80 9.80

AVAILABILITY • • •

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

•

• •

m m

• •

•

• m

• •

•

• •

m m

• Australian stock item

bright

FIRE/nanoFIRE

German stock item

TiAlN SuperA

INTERCHANGEABLE INSERTS HT 800 DRILLS

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Application Surface finish Tolerance

Point angle

140º

Code no. 15,500 15,600 15,700 15,800 15,870 16,000 16,270 16,500 16,670 17,000 17,070 17,460 17,500 17,600 17,860 18,000 18,260 18,500 18,650 19,000 19,050 19,250 19,450 19,500 19,600 19,840 20,000 20,240 20,500 20,640 21,000 21,030 21,100 21,430 21,500 21,830 22,000 22,220 22,500

for drill.

for pilot.

holder size

155 155 155 155 155 160 160 165 165 170 170 170 175 175 175 180 180 185 185 190 190 190 190 195 195 195 200 200 205 205 210 210 210 210 215 215 220 220 225

140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 180 180 180 180 180 180 180 180 180 180 180 180 200 200 200 200 200 200 200 200 200 220 220 220

15.50 15.60 15.70 15.80 15.87 16.00 16.27 16.50 16.67 17.00 17.07 17.46 17.50 17.60 17.86 18.00 18.26 18.50 18.65 19.00 19.05 19.25 19.45 19.50 19.60 19.84 20.00 24.24 20.50 20.64 21.00 21.03 21.10 21.43 21.50 21.83 22.00 22.22 22.50

2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.00 3.00 3.10 3.10 3.10 3.20 3.20 3.30 3.30 3.40 3.40 3.40 3.50 3.50 3.60 3.60 3.60 3.60 3.70 3.70 3.70 3.80 3.80 3.90 3.90 3.90 3.90 4.00 4.00 4.10 4.10 4.10

6.00 6.00 6.00 6.00 6.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 10.00 10.00 10.00

9.80 9.80 9.80 9.80 9.80 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 13.90 13.90 13.90 13.90 13.90 13.90 13.90 13.90 13.90 13.90 15.30 15.30 15.30

AVAILABILITY m

•

• •

• • •

• •

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

•

• • •

•

• • •

• Australian stock item

•

FIRE/nanoFIRE

German stock item

TiAlN SuperA

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Application

DRILLS

INTERCHANGEABLE INSERTS HT 800

Surface finish Tolerance

Point angle

140º

Code no. 22,620 23,000 23,020 23,420 23,500 23,810 24,000 24,100 24,210 24,500 24,610 25,000 25,400 25,500 25,670 25,700 25,810 26,000 26,190 26,500 26,590 27,000 27,500 27,700 27,780 28,000 28,180 28,500 28,580 29,000 29,370 29,500 29,770 30,000 30,160 30,500 30,960 31,000 31,500

for drill.

for pilot.

holder size

225 230 230 230 235 235 240 240 240 245 245 250 250 255 255 255 255 260 260 260 260 270 270 270 270 280 280 280 280 290 290 290 290 300 300 300 300 310 310

220 220 220 220 220 220 240 240 240 240 240 240 240 240 240 240 240 260 260 260 260 260 260 260 260 280 280 280 280 280 280 280 280 300 300 300 300 300 300

22.62 23.00 23.02 23.42 23.50 23.81 24.00 24.10 24.21 24.50 24.61 25.00 25.40 25.50 25.67 25.70 25.81 26.00 26.19 26.50 26.59 27.00 27.50 27.70 27.78 28.00 28.18 28.50 28.58 29.00 29.00 29.50 29.77 30.00 30.16 30.50 30.96 31.00 31.50

4.20 4.20 4.20 4.30 4.30 4.40 4.40 4.40 4.50 4.50 4.50 4.60 4.70 4.70 4.70 4.70 4.70 4.80 4.80 4.90 4.90 5.00 5.10 5.10 5.10 5.10 5.20 5.20 5.30 5.30 5.40 5.40 5.50 5.50 5.50 5.60 5.70 5.70 5.80

10.00 10.00 10.00 10.00 10.00 10.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 13.00 13.00 13.00 13.00 13.00 13.00 13.00 13.00 14.00 14.00 14.00 14.00 14.00 14.00

15.30 15.30 15.30 15.30 15.30 15.30 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.70 20.70 20.70 20.70 20.70 20.70 20.70 20.70 22.30 22.30 22.30 22.30 22.30 22.30

AVAILABILITY m

•

• •

•

• •

•

• • • Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

•

FIRE/nanoFIRE

m m

German stock item

TiAlN SuperA

INTERCHANGEABLE INSERTS HT 800 DRILLS

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Application Surface finish Tolerance

Point angle

140º

Code no. 31,750 32,000 32,500 32,540 32,940 33,000 33,340 33,500 34,000 34,130 34,500 34,930 35,000 35,500 35,720 36,000 36,500 36,510 37,000 37,310 37,500 38,000 38,100 38,460 38,500 39,000 39,500 40,000

for drill.

for pilot.

holder size

310 320 320 320 320 330 330 330 340 340 340 340 350 350 350 360 360 360 370 370 370 380 380 380 380 390 390 390

300 320 320 320 320 320 320 320 320 320 320 320 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360

31.75 32.00 32.50 32.54 34.94 33.00 33.34 33.50 34.00 34.13 34.50 34.93 35.00 35.50 35.72 36.00 36.50 36.51 37.00 37.31 37.50 38.00 38.10 38.46 38.50 39.00 39.50 40.00

5.80 5.90 6.00 6.00 6.00 6.10 6.10 6.10 6.20 6.30 6.30 6.40 6.40 6.50 6.50 6.60 6.70 6.70 6.80 6.80 6.90 7.00 7.00 7.00 7.10 7.10 7.20 7.30

14.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00

22.30 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90

AVAILABILITY m

•

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

•

FIRE/nanoFIRE

German stock item

TiAlN SuperA

Guhring no.

4112 B

Standard

Guhring std.

Tool material

Solid carbide

Application

DRILLS

INTERCHANGEABLE INSERTS HT 800 FOR BEAM DRILLING

Steel

Surface finish Tolerance

Point angle

123º

FOR BEAM DRILLING

123º

160º

Code no. 14,000 16,000 18,000 20,000 22,000 24,000 26,000 27,000 28,000 29,000 30,000 32,000

for drill.

for pilot.

holder size

140 160 180 200 220 240 260 270 280 290 300 320

140 160 180 180 220 240 260 260 280 280 300 320

5.60 6.40 7.20 8.00 8.80 9.60 10.40 10.80 11.20 11.60 12.00 12.80

2.50 2.90 3.30 3.70 4.10 4.40 4.80 5.00 5.10 5.30 5.50 5.90

6.00 7.00 8.00 9.00 10.00 11.00 12.00 12.00 13.00 13.00 14.00 15.00

10.10 11.30 12.70 14.20 15.60 15.90 20.30 20.40 21.10 21.20 22.70 23.60

AVAILABILITY m m

• m

• m m m m m m m

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

German stock item

TiAlN SuperA

CUTTING SPEED RECOMMENDATION FOR TWIST DRILLS DRILLS

Guhring no. Standard/DIN

Feed column no. Drill Ø mm

0,50 1,00 2,00 2,50 3,15 4,00 5,00 6,30 8,00 10,00 12,50 16,00 20,00 25,00 31,50 40,00 50,00 63,00 80,00

0,004 0,006 0,020 0,025 0,032 0,040 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,400

2 0,006 0,008 0,025 0,032 0,040 0,050 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,310 0,400 0,500

3 0,007 0,012 0,032 0,040 0,050 0,063 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,630

0,008 0,014 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,800

5 f (mm/rev.) 0,010 0,016 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 1,000

Tool material

Surface finish 0,012 0,018 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,500 0,630 0,800 1,000 1,250

0,014 0,020 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,600

0,016 0,023 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 0,800 1,000 1,250 1,600 1,600

0,019 0,025 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,250 1,600 2,000

Type

Coolant: Air Neat oil Soluble oil Tensile strength Hardness MPa (N/mm2)

Material group

Material examples

Common structural steels

S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate E295, E360, P500NH 11SMnPb30, 11SMn37, 1020, S1214, S1213, S12L13, S12L14 46S20, 46SPb20 C22, C30E, 1035, 1045, 1055, 1060, 1025 C45, C45E C60, C60E 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26 36NiCr6, 41Cr4, 42CrMo4 C10E, 1010, 1015 10CrMo11, 11MnSi6, 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620 15NiCr13, 16MnCr5, 20CrMo5, N33, EN36A 34CrAl6 31CrMoV9, 34CrAlNi7 C75W, 102Cr6, 29CrMoV9, H11, H13, P20, D2, D3 X210Cr12, X42Cr13, 105WCr6, X45NiCrMo4 S 6-5-2-5, S 6-5-2, S 6-5-3, M2, M3, M35, M45 55Si7, 55Cr3, 51CrV4, 5155, 6150, 9255 X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630 X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 304, 310, 316, 316Ti, 321 X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, 420C, 431, 440C –

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

Nimonic, Inconel, Monel, Hastelloy, Bisalloy GG10, GG15, GG20 GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35 GGG70, GTS70, 50005, Nodular Iron – Ti99,5, TiAl5Sn2,5, TiCu2 TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2,5, - TiAl8Mo1V1 Al99,5, AlMgSi1, AlMg1 AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5 G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg MgMn2, G-MgAl8Zn1, G-MgAl6Zn1 SE-Cu, CuSn6, G-CuSn5ZnPb CuZn39Pb2, CuZn39Pb3, CuZn43Pb2 CuZn20, CuZn33, CuZn37Pb0,5 CuSn7ZnPb, CuPb5Sn5, CuPb10Sn CuNi18Zn19Pb CuAl5, CuAl9Mn, CuSn10 CuAl11Ni, CuBe2 Bakelit, Resopal, Pertinax, Moltopren Plexiglas, Hostalen, Novodur, Makralon GGV25, GGV35 GGV40, GGV50, SiMo 6 ADI800, ADI1000 ADI1200, ADI1400 Kevlar GRP/CFRP

≤2000

Free-cutting steels Unalloyed heat-treatable steels

Alloyed heat-treatable steels Unalloyed case hardened steels Alloyed case hardened steels Nitriding steels Tool steels High speed steels Spring steels Stainless steels, sulphured austenitic martensitic Hardened steels Special alloys Cast iron Spheroidal graphite iron and Malleable cast iron Chilled cast iron Ti and Ti-alloys Aluminium and Al-alloys Al wrought alloys Al cast alloys ≤ 10 % Si ≤ 24 % Si Magnesium alloys Copper, low-alloyed Brass, short-chipping long-chipping Bronze, short-chipping Bronze, long-chipping Duroplastics Thermoplastics New cast materials CGI New cast materials ADI Kevlar Glass, carbon concent. plastics

bright

steam tempered

nitrided lands

TiN

Coolant

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100 ≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

≤3XD DRILLING DEPTH

≤5XD

≤10XD

>10XD DRILLING DEPTH

223

557 581

380

205 9651 245

217

270 1101

502 503 504 242 243 244 526 527 565 293 298 299

1897

G.S. 333

G.S.

338 338 345

340

G.S. G.S.

1869 1869 1869 G.S. G.S. G.S. 1870 1870 G.S. G.S. G.S. G.S.

HSS

HSS HSS

HSS

>Ø 2,36

Vc Feed Vc Vc Feed Vc col. m/ m/ col. m/ Feed col. m/ no. min no. min min no. min 27 6 32 6 6 32 6 27 22 5 25 5 5 25 5 22 30 6 32 6 6 32 6 30 30 5 25 5 5 25 5 30 25 5 32 5 5 32 5 25 25 5 25 5 5 25 5 25

>Ø 2,36

Feed col. no. 6 5 6 5 5 5

6 5 6 5 5 5

HSS

>Ø 2,36

>Ø 16,0

GT 100

Vc Feed Vc col. Vc m/ col. m/ Feed m/ no. min no. min min 24 6 26 6 6 22 20 5 22 5 5 18 27 6 30 6 6 22 27 5 30 5 5 18 22 5 24 5 5 22 22 5 24 5 5 18 22 4 4 20 4 4 14 3 3 27 6 30 6 6 22 17 4 4 12 3 3 14 4 4 10 3 3 14 4 15 4 4 12 10 3 3 6 10 3 3 7 2 2

Feed Column no. 5 4 5 4 4 4

5 4 5 4 4 4

3 2

30 30 25 20

6 6 6 6

32 25 28 20

6 6 6 6

32 25 28 20

6 6 6 6

30 30 25 20

6 6 6 6

27 27 22 18

6 6 6 6

30 30 24 20 7

6 6 6 6 3

22 18 20 14

5 5 5 5

50 50 70 60

7 6 6 5

7 6 6 5 5 5 4 4 4

63 50 80 32 63 40 32 28 25

7 6 6 5 5 5 4 4 4

7 6 6 5

45 45 63 54

7 6 6 5

50 50

7 6

45 36 55 22

6 5 5 4

5 4 4 4

7 6 6 5 5 5 4 4 4

50 50 70 60

40 30 25 15

63 50 80 32 63 40 32 28 25

40 30 25 15

5 4 4 4

36 28 22 22

5 4 4 4

24 24 22

4 4 4

28 22 20 18

4 3 3 3

18 28

4 5

16 25

4 5

16 25

4 5

18 28

4 5

14 22

4 5

12 18

3 4

bright

steam tempered

nitrided lands

TiN

DRILLS

CUTTING SPEED RECOMMENDATION FOR TWIST DRILLS

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

CUTTING SPEED RECOMMENDATION FOR TWIST DRILLS DRILLS

Guhring no. Standard/DIN

Feed column no. Drill Ø mm

0,50 1,00 2,00 2,50 3,15 4,00 5,00 6,30 8,00 10,00 12,50 16,00 20,00 25,00 31,50 40,00 50,00 63,00 80,00

0,004 0,006 0,020 0,025 0,032 0,040 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,400

2 0,006 0,008 0,025 0,032 0,040 0,050 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,310 0,400 0,500

3 0,007 0,012 0,032 0,040 0,050 0,063 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,630

0,008 0,014 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,800

5 f (mm/rev.) 0,010 0,016 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 1,000

Tool material

Surface finish 0,012 0,018 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,500 0,630 0,800 1,000 1,250

0,014 0,020 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,600

0,016 0,023 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 0,800 1,000 1,250 1,600 1,600

0,019 0,025 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,250 1,600 2,000

Type

Coolant: Air Neat oil Soluble oil Tensile strength Hardness MPa (N/mm2)

Material group

Material examples

Common structural steels

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

≤2000

Free-cutting steels Unalloyed heat-treatable steels

bright

steam tempered

nitrided lands

TiN

Coolant

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100 ≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

≤3XD DRILLING DEPTH

≤5XD DRILLING DEPTH

659

5520

658

5523

5522

5536

5537

618 619

301

701

6408

1897

338

340

1869 1869

1899

G.S.

HSCO

HSS-EPM

HSCO HSCO

HSS-EPM

Carbide

HSCO

GT80

GV120

GU500 DZ

Vc Feed m/ col. min no. 38 6 33 5 44 6 38 5 44 6 44 5 38 4 27 4 22 3 44 4 22 4 18 3 22 4 18 3 19 4 14 3 14 3 9 2 15 4 10 3 12 3

Vc Feed m/ col. min no. 38 5 33 4 44 5 38 5 44 5 44 5 38 4 27 4 22 3 44 4 22 4 18 3 22 4 18 3 19 4 14 3 14 3 9 2 20 4 15 3 18 3 4 1

Vc Feed m/ col. min no. 45 6 35 5 50 6 40 6 42 6 35 6 22 5 18 4 15 3 40 6 20 4 15 3 18 4 12 3 18 4 13 3 13 3

88 77 44 45 40 22 17 22 27

MICRO-PRECISION DRILLS ≤4XD ≤8XD

>10XD

1228 HSCO

45 40 33 27 8

≤10XD

6 6 6 6 3

5 5 5 5 4 4 4 4 5

6 40 35 33 27 12 11 7

45 40 23 17

bright

2 6 6 6 6 3 2 2

5 4 4 4

GT100

GU500 DZ

Vc Feed m/ col. min no. 42 6 36 5 48 5 42 5

Vc Feed m/ col. min no. 35 6 30 5 40 6 30 6 32 6 28 6 20 5 15 4 13 3 30 6 16 4 12 3 15 4 10 3 15 4 10 3 10 3

48 42 30 34 48 24 20 24 20 21 16 17

5 4 4 3 4 4 3 4 3 4 3 3

18 12 15

4 4 4

45 36 40 28

6 6 6 6

45 40 36 29

HSCO

14 10 12

4 4 4

6 6 6 6

36 30 30 22

6 6 6 6

GT100

GU500 DZ

Vc Feed m/ col. min no. 40 6 32 5 45 6 40 5 42 6 40 5 28 4 25 4 20 3 40 4 22 4 18 3 20 4 15 3 25 4 15 3 15 3 12 2 15 4 10 3 12 3

Vc Feed m/ col. min no. 29 6 22 5 32 6 25 6 25 6 22 6 13 5 12 4 11 3 25 6 12 4 11 3 12 4 7 3 12 4 9 3 9 3

Vc Feed m/ col. min no. 32 6 25 5 35 6 28 6 28 6 25 6 15 5 13 4 12 3 28 6 14 4 12 3 13 4 8 3 13 4 10 3 10 3

12 7 11

4 4 4

13 8 12

4 4 4

29 23 25 18

6 6 6 6

32 26 28 20

6 6 6 6

70 70 85 70 70 32 63 40 50 35 32 28 25 15

7 7 7 6 6 5 5 5 4 4 4 4 4 4

25 20 24

steam tempered

4 4 4

50 50 65 60 60 25 45 30 36 30 30 25 20 15

7 7 7 6 6 5 5 5 4 4 4 4 4 4

6 6 6 6 3

60 50 45 40 32 25

5 5 4 4 4 4

nitrided lands

TiN

45 45 54 45 45 21 45 25 31 22 22 18 16 11

7 7 7 6 6 5 5 5 4 4 4 4 4 4

50 50 60 50 50 24 50 28 35 25 24 20 18 12

TiAlN

7 7 7 6 6 5 5 5 4 4 4 4 4 4

GT100 GT100

Vc m/ min 30 25 33 30 33 33 20 14 10 29 14 10 10 8 11 8 8 5 10 8 10 3 5

50 40 45 32 8

DRILLS

CUTTING SPEED RECOMMENDATION FOR TWIST DRILLS

Feed col. no. 4 4 4 4 4 4 3 3 2 4 3 2 3 2 3 2 2 1 3 2 2 1

4 4 4 4 4 4 3 3 2 4 3 2 3 2 3 2 2 1 3 2 2 1

16 5 6 5

5 2 1 1

50 40

6 5

30 45 30 25 20 16 10 14 20

4 4 4 4 4 3 3 3 3

C TiCN

Vc Feed m/ col. min no. 21 106 18 105 18 106 16 105 20 105 18 105 14 104 14 104 12 103 18 106 14 104 12 103 14 104 12 103 16 104 14 103 14 103 8 102 18 104 14 103 16 103

26 22 18 22

106 106 106 106

26 18 75 42

107 106 106 105

22 22 18 13

105 104 104 104

16 18

104 104

FIRE/nanoFIRE

Vc Feed m/ col. min no. 50 105 35 104 50 105 45 104 45 104 35 104 30 103 30 103

Vc Feed m/ col. min no. 105 58 100 58 105 59 90 59 95 58 95 58 90 58 90 58 70 58 100 57 85 58 70 58 70 57 60 57 50 58 50 58 50 57 50 57 70 57 60 56 70 57

50 40

103 103

25 25

103 103 103

20 25 25 25 15

102 103 102 102 104

15 80 60 60 50

103 105 105 105 105

25 150 140 140 130

56 60 60 60 60

45 25 160 150 100 60 150 50 67 44 68 49 53 36 50 36

104 104 107 106 106 106 105 105 106 104 103 103 103 103 103 103

35 35 70 70 135 135

56 56 68 68 59 59

TiAlN SuperA

CUTTING SPEED RECOMMENDATION DRILLS

Guhring no. Standard/DIN

Feed column no. Drill Ø mm

0,50 1,00 2,00 2,50 3,15 4,00 5,00 6,30 8,00 10,00 12,50 16,00 20,00 25,00 31,50 40,00 50,00 63,00 80,00

0,004 0,006 0,020 0,025 0,032 0,040 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,400

2 0,006 0,008 0,025 0,032 0,040 0,050 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,310 0,400 0,500

3 0,007 0,012 0,032 0,040 0,050 0,063 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,630

0,008 0,014 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,800

5 f (mm/rev.) 0,010 0,016 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 1,000

Tool material

Carbide grade 0,012 0,018 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,500 0,630 0,800 1,000 1,250

0,014 0,020 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,600

0,016 0,023 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 0,800 1,000 1,250 1,600 1,600

0,019 0,025 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,250 1,600 2,000

Surface finish Type

Coolant: Air Neat oil Soluble oil Tensile strength Hardness MPa (N/mm2)

Material group

Material examples

Common structural steels

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

≤2000

Free-cutting steels Unalloyed heat-treatable steels

bright

steam tempered

nitrided lands

TiN

Coolant

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100 ≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

≤3XD DRILLING DEPTH

≤5XD DRILLING DEPTH

≤7XD

≤12XD

723

730

5516

2463

5514

5510

732 2464

5517

5515

5511

5512

5525

G.S.

6539

6537K

G.S.

6537L

G.S.

Carbide

K/P

K/P K/P

K/P

K10/ K20

Vc Feed m/ col. min no. 80 4 70 4 80 5 70 4 80 4 70 4 60 4 60 4

K10/ K20

Vc Feed m/ col. min no. 80 4 70 4 80 5 70 4 80 4 70 4 60 4 60 4

Vc Feed m/ col. min no.

80 70 80 70 60 60

5 4 4 4 4 4

Vc Feed m/ col. min no. 104 5 91 5 104 6 91 5 104 5 91 5 78 5 78 5

80 60

5 4

80 60

5 4

80 60

5 4

104 78

6 5

25 25 25 25 20

2 4 3 3 3

2 2 1 2 2

25 25 25 25 20

2 4 3 3 3

32 32 20 32 26

3 2 1 2 4

15 90 80 80 70

2 4 4 4 4

15 90 80 80 70

2 4 4 4 4

20 117 104 91 104

2 5 5 5 5

20 15 200 200 150 120 180 80 180 180 120 120 70 50 40 50

3 2 7 7 6 6 5 5 5 5 5 5 4 3 4 3

25 25 15 25 20 10 15 90 80 80 70 10 15 15 200 200 150 120 180 80 180 180 120 120 70 50 50 40

1 1 7 7 6 6 6 5 5 5 5 5 4 3 4 3

20 15 200 200 150 120 180 80 180 180 120 120 70 50 40

3 2 7 7 6 6 5 5 5 5 5 5 4 3 3

15 15 260 260 195 156 234 104 234 234 156 156 91 65 65 52

1 1 8 8 7 7 6 6 6 6 6 6 5 4 5 4

104

bright

steam tempered

Vc Feed m/ col. min no. 130 7 110 6 145 8 110 7 120 7 110 7 105 7 105 7 100 6 130 8 120 7 85 5 100 6 90 5 65 6 55 5 45 55 45 45 45 25 25 210 155 145 125 35 40 35 260 260 235 170 260 105 270 180 105 85 80 60

3 4 4 3 3 2 4 8 8 7 7 3 4 3 9 9 8 8 8 7 8 7 6 6 5 5

Vc Feed m/ col. min no. 145 7 120 6 170 8 145 8 130 8 125 7 120 7 120 7 105 7 145 8 120 7 85 5 100 7 105 5 80 6 65 5 60 5 60 3 60 5 55 5 45 5 55 3 35 2 35 4 210 9 160 9 140 9 130 8 40 3 45 4 40 3 310 9 310 9 260 9 220 9 280 8 125 7 325 8 220 7 125 7 105 6 90 6 80 6

nitrided lands

TiN

K10/ K20

Vc Feed Feed m/ col. col. min no. no. 100 4 5 90 4 5 100 5 6 90 4 4 100 4 5 90 4 5 80 4 5 80 4 5

Vc Feed m/ col. min no. 80 4 70 4 80 5 70 4 80 4 70 4 60 4 60 4

100 80

5 4

6 5

80 60

5 4

30 30 20 30 20

2 2 1 2 2

3 2 1 2 2

25 25 25 25 20

2 4 3 3 3

20 115 100 90 80

2 4 4 4 4

3 5 5 5 5

15 90 80 70 60

2 4 4 4 4

15 15 260 260 195 155 235 100 235 235 155 155 90 65 50 65

1 1 7 7 6 6 5 5 5 5 5 5 4 3 4 3

1 1 8 8 7 7 6 6 6 6 6 6 5 4 5 4

20 15 200 200 150 120 180 80 180 180 120 120 70 50 40

3 2 7 7 6 6 5 5 5 5 5 5 4 3 4

100

TiAlN

C TiCN

3 4 4 3 3 2 4 8 8 7 7 3 4 3 9 9 9 8 8 7 8 7 6 6 5 5

FIRE/nanoFIRE

Vc Feed m/ col. min no. 145 6 120 5 170 7 145 7 130 7 125 6 120 6 120 6 105 6 145 7 120 6 85 4 110 6 105 4 80 5 65 4 60 4 60 2 60 4 55 4 45 4 55 2 35 1 35 3 195 8 160 8 140 8 130 7 40 2 40 3 40 2 310 8 310 8 260 8 220 8 280 7 125 6 325 7 220 6 125 6 105 5 90 5 80 5

DRILLS

CUTTING SPEED RECOMMENDATION

Vc Feed m/ col. min no. 90 6 80 5 100 7 90 7 90 7 80 6 80 6 80 6 60 6 90 7 80 6 60 4 60 6 50 4 50 5 40 4 35 4 35 2 40 4 40 4 40 4

120 120 90 80

8 8 8 7

150 150 150 120 150 80 120 120 40

8 8 8 8 7 6 7 6 6

TiAlN SuperA

CUTTING SPEED RECOMMENDATION DRILLS

Guhring no. Standard/DIN

Feed column no. Drill Ø mm

0,50 1,00 2,00 2,50 3,15 4,00 5,00 6,30 8,00 10,00 12,50 16,00 20,00 25,00 31,50 40,00 50,00 63,00 80,00

0,004 0,006 0,020 0,025 0,032 0,040 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,400

2 0,006 0,008 0,025 0,032 0,040 0,050 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,310 0,400 0,500

3 0,007 0,012 0,032 0,040 0,050 0,063 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,630

0,008 0,014 0,040 0,050 0,063 0,080 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,800

5 f (mm/rev.) 0,010 0,016 0,050 0,063 0,080 0,100 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 1,000

Tool material

Carbide grade 0,012 0,018 0,063 0,080 0,100 0,125 0,125 0,160 0,200 0,250 0,250 0,315 0,400 0,500 0,500 0,630 0,800 1,000 1,250

0,014 0,020 0,080 0,100 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,600

0,016 0,023 0,100 0,125 0,160 0,200 0,200 0,250 0,315 0,400 0,400 0,500 0,630 0,800 0,800 1,000 1,250 1,600 1,600

0,019 0,025 0,125 0,160 0,160 0,200 0,250 0,315 0,315 0,400 0,500 0,630 0,630 0,800 1,000 1,250 1,250 1,600 2,000

Surface finish Type

Coolant: Air Neat oil Soluble oil Tensile strength Hardness MPa (N/mm2)

Material group

Material examples

Common structural steels

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

≤2000

Free-cutting steels Unalloyed heat-treatable steels

bright

steam tempered

nitrided lands

TiN

Coolant

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100 ≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HT800WP INTERCHANGEABLE INSERTS ≤3XD ≤5XD

≤20XD

≤30XD

≤40XD

6511

6513

6514

4112

4115

4112

4115

4112

4115

4112

4115

G.S.

Carbide

K/P

Carbide

K/P

RT100T

2 8 8 8 8

30 120 80 120 80

2 8 8 8 8

30 120 80 120 80

2 8 8 8 8

120 120

1 8

120 100

1 8

120 100

1 8

100 100 90

6 6 8

80 80 70

6 6 8

80 80 70

6 6 8

bright

steam tempered

90 40 35

6 3 2

90 40 35

6 3 2

nitrided lands

TiN

≤10XD

Vc Feed Vc Feed Vc Feed Vc Feed Vc Feed Vc Feed Vc Feed col. col. col. col. col. col. m/min col. no. m/min no. m/min no. m/min no. m/min no. m/min no. m/min no. 110 8 80 7 80 7 130 6 125 6 110 8 80 7 80 7 110 5 105 5 120 8 100 8 100 8 130 7 125 7 120 8 100 8 100 8 110 6 105 6 110 6 110 6 110 6 130 6 125 6 110 8 80 7 80 7 125 6 120 6 100 7 80 7 80 7 110 5 105 5 110 7 80 7 80 6-7 110 6 105 6 110 6 80 6 80 6 90 5 85 5 110 8 80 7 80 7 130 7 125 7 110 7 80 6 80 6 110 6 105 6 110 6 80 6 80 6 70 4 70 4 100 5 80 5 80 5 105 5 105 5 80 5 60 5 60 5 70 4 70 4 100 6 80 6 80 6-7 60 5 55 5 80 5 70 4 70 4 55 4 50 4 50 5 50 4 50 4 55 3 55 3 50 5 50 4 50 4 50 2 50 2 55 3 55 3 100 5 80 5 80 5 40 3 40 3 60 3 60 3 70 2-3 35 3 35 3 100 5 80 5 80 5 25 2 25 2 50 4 50 4 50 4 30 140 100 140 100

≤7XD

TiAlN

DRILLS

CUTTING SPEED RECOMMENDATION

Vc Feed Vc Feed Vc Feed Vc Feed col. col. col. m/ col. min no. m/min no. m/min no. m/min no. 100 5 120 5 95 4 105 4 100 6 120 6 95 5 105 5 100 5 120 5 95 5 110 5 90 4 100 4 90 5 100 5 85 4 85 4 100 6 120 6 90 5 100 5 70 4 70 4 95 4 105 4 70 3 70 3 55 4 55 4 50 3 50 3 55 2 55 2 50 2 50 2 55 2 55 2 40 2 40 2 35 2 35 2 25 1 25 1 25 1 25 1

C TiCN

70 40 35

6 2 1

FIRE/nanoFIRE

70 40 35

TiAlN SuperA

6 2 1

GUN DRILLS

EB80

SINGLE FLUTED

DEEP HOLE DRILLS

40 X D

CARBIDE

HSS-E TiAlN COATING

DEEP HOLE DRILLING MACHINE

BE100

DOUBLE-FLUTED

TOLERANCES

ZB80

CONVENTIONAL MACHINE TOOL

INSERT

HIGH-PERFORMANCE

DRILLING

METRIC

TiCN COATING BRIGHT FINISH

GUN DRILLS

GUN DRILLS EB 80, 20 X D Guhring no.

GUN DRILLS

5639

Standard

Guhring std.

Tool material

Carbide

Surface

Drilling depth

20 x D

Cutting direction

right-hand

Tolerance

*Sizes above dia 13mm all uncoated

l3 l1

4.000 5.000 6.000 8.000 10.000 12.000 13.000 13.500 14.000 14.500 15.000 15.500 16.000 17.000 18.000 19.000 20.000 22.000 25.000 30.000 32.000

12.00 16.00 16.00 16.00 20.00 20.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00

150.00 180.00 210.00 260.00 320.00 370.00 405.00 408.00 420.00 433.00 445.00 458.00 470.00 495.00 520.00 545.00 570.00 620.00 695.00 820.00 870.00

100.00 130.00 160.00 210.00 260.00 310.00 325.00 338.00 350.00 363.00 375.00 388.00 400.00 425.00 450.00 475.00 500.00 550.00 625.00 750.00 800.00

45.00 48.00 48.00 48.00 50.00 50.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

GUN DRILLS EB 80, 40 X D GUN DRILLS

Guhring no.

5641

Standard

Guhring std.

Tool material

Carbide

Surface

Drilling depth

40 x D

Cutting direction

right-hand

Tolerance

*Sizes above dia 13mm all uncoated

l3 l1

4.000 5.000 6.000 8.000 10.000 12.000 13.000 13.500 14.000 14.500 15.000 15.500 16.000 17.000 18.000 19.000 20.000 22.000 25.000 30.000 32.000

12.00 16.00 16.00 16.00 20.00 20.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00

230.00 280.00 320.00 420.00 510.00 600.00 655.00 678.00 700.00 723.00 745.00 768.00 790.00 835.00 880.00 925.00 970.00 1060.00 1195.00 1420.00 1510.00

185.00 232.00 272.00 372.00 460.00 550.00 585.00 608.00 630.00 653.00 675.00 698.00 720.00 765.00 810.00 855.00 900.00 990.00 1125.00 1350.00 1440.00

45.00 48.00 48.00 48.00 50.00 50.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

AVAILABILITY • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

GUN DRILLS EB 80, 80 X D Guhring no.

GUN DRILLS

5642

Standard

Guhring std.

Tool material

Carbide

Surface

Drilling depth

80 x D

Cutting direction

right-hand

Tolerance

*Sizes above dia 11.95mm all uncoated

l3 l1

4.950 5.950 7.950 9.950 11.950 12.950 13.450 13.950 14.450 14.950 15.450 15.950 16.950 17.950 18.950 19.950 21.950 24.950

16.000 16.000 16.000 20.000 20.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000

480.00 560.00 740.00 910.00 1080.00 1170.00 1215.00 1255.00 1300.00 1340.00 1383.00 1425.00 1510.00 1600.00 1680.00 1765.00 1940.00 2190.00

432.00 512.00 692.00 860.00 1030.00 1101.00 1143.00 1186.00 1228.00 1271.00 1313.00 1356.00 1441.00 1526.00 1611.00 1696.00 1866.00 2121.00

48.00 48.00 48.00 50.00 50.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

AVAILABILITY • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

CUTTING SPEED RECOMMENDATION FOR GUN DRILLS GUN DRILLS

Feed column no. Drill Ø mm

1.50 2.00 2.50 4.00 6.00 8.00 10.00 14.00 18.00 20.00 24.00 28.00 30.00 35.00 40.00

0.002 0.003 0.004 0.005 0.007 0.010 0.012 0.020 0.025 0.026 0.027 0.028 0.030 0.035 0.040

0.004 0.005 0.006 0.007 0.009 0.014 0.016 0.025 0.030 0.035 0.036 0.038 0.040 0.045 0.050

0.006 0.007 0.008 0.010 0.013 0.022 0.028 0.035 0.040 0.045 0.047 0.049 0.050 0.055 0.060

0.008 0.010 0.012 0.016 0.024 0.032 0.040 0.050 0.055 0.060 0.065 0.068 0.070 0.075 0.080

0.012 0.016 0.018 0.025 0.035 0.045 0.055 0.065 0.070 0.080 0.085 0.090 0.100 0.120 0.150

0.032 0.046 0.054 0.065 0.085 0.100 0.120 0.130 0.145 0.180 0.185 0.195 0.200 0.250 0.300

0.045 0.055 0.070 0.085 0.120 0.150 0.160 0.180 0.200 0.250 0.300 0.350 0.400 0.450 0.500

0.045 0.050 0.075 0.120 0.180 0.240 0.300 0.420

0.075 0.100 0.125 0.240 0.360 0.480 0.600 0.700

f (mm/rev.)

0.020 0.028 0.030 0.043 0.061 0.068 0.075 0.085 0.095 0.110 0.130 0.140 0.150 0.180 0.200

≤20XD

≤40XD

Guhring no.

5639

5641 5642

Standard/DIN

G.S.

Tool material

Carbide

Carbide grade

K30/ K40

Surface finish Type

Carbide K30/ K40

K30/ K40

EB80

*The feed rates always relate to tools with the recommended coating. In some cases the successful application of un-coated tools cannot be guaranteed. Coolant: Air Neat oil Soluble oil

All deep hole drills must have support for the pilot hole. Deep hole drills must never operate at full speed without support in the machine shop. Material group

Material examples

Tensile strength Hardness Coolant Rec. MPa (N/mm2) coating

Common structural steels

S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate, E295, E360, P500NH Free-cutting steels 11SMnPb30, 11SMn37, 1020, S1214, S1213 S12L13, S12L14 , 46S20, 46SPb20 Unalloyed heat-treatable steels C22, C30E, 1035, 1045, 1055, 1060, 1025 C45, C45E C60, C60E Alloyed heat-treatable steels 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26, 36NiCr6, 41Cr4, 42CrMo4 Unalloyed case hardened steels C10E, 1010, 1015 Alloyed case hardened steels 10CrMo11, 11MnSi6, 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, 15NiCr13, 16MnCr5, 20CrMo5, N33 Nitriding steels 34CrAl6 31CrMoV9, 34CrAlNi7 Tool steels C75W, 102Cr6, 29CrMoV9, H11, H13, P20, D2, D3 X210Cr12, X42Cr13, 105WCr6, X45NiCrMo4 High speed steels S 6-5-2-5, S 6-5-2, S 6-5-3, M2, M3, M35, M45 Spring steels 55Si7, 55Cr3, 51CrV4, 5155, 6150, 9255 Stainless steels, sulphured X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630 austenitic X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 321 martensitic X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, Hardened steels –

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

Special alloys Cast iron

≤2000

Nimonic, Inconel, Monel, Hastelloy, Bisalloy GG10, GG15, GG20 GG25, GG30, GG35 GG40 Spheroidal graphite iron and GGG40, GGG50, GGG60, 32510,GTW35 malleable cast iron GGG70, GTS70, 50005, Nodular Iron Chilled cast iron – Ti and Ti-alloys Ti99,5, TiAl5Sn2,5, TiCu2 TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2,5, - TiAl8Mo1V1 Aluminium and Al-alloys Al99,5, AlMgSi1, AlMg1 Al wrought alloys AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5 Al cast alloys ≤ 10 % Si G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 ≤ 24 % Si G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg Magnesium alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn1 Copper, low-alloyed SE-Cu, CuSn6, G-CuSn5ZnPb Brass, short-chipping CuZn39Pb2, CuZn39Pb3, CuZn43Pb2 long-chipping CuZn20, CuZn33, CuZn37Pb0,5 Bronze, short-chipping CuSn7ZnPb, CuPb5Sn5, CuPb10Sn CuNi18Zn19Pb Bronze, long-chipping CuAl5, CuAl9Mn, CuSn10 CuAl11Ni, CuBe2 Duroplastics Bakelit, Resopal, Pertinax, Moltopren Thermoplastics Plexiglas, Hostalen, Novodur, Makralon New cast materials CGI GGV25, GGV35 GGV40, GGV50, SiMo 6 New cast materials ADI ADI800, ADI1000 ADI1200, ADI1400 Kevlar Kevlar Glass, carbon concent. plastics GRP/CFRP

bright

steam tempered

nitrided lands

TiN

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100

Vc Feed m/ col. min no. 100 14 85 14 90 14 80 14 90 13 80 13 75 13 75 13 65 13 80 14 75 13 65 13 75 13 65 13 75 12 65 12 55 11 65 12 55 13 45 13 35 13 30 12 25 11 35 11 85 15 80 15 80 14 70 14 55 13 35 11 30 11 150 16 120 16 150 17 130 17 110 16 75 14 120 17 90 17 95 16 75 16 70 16 60 16 75 14 70 14

Vc Feed Feed m/ col. col. min no. no. 95 13 13 80 13 13 85 13 13 75 13 13 85 12 12 75 12 12 70 12 12 70 12 12 60 12 12 75 13 13 70 12 12 60 12 12 70 12 12 60 12 12 70 11 11 60 11 11 50 11 11 60 12 12 50 12 12 40 12 12 35 12 12 25 11 11 20 11 11 30 11 11 80 14 14 75 14 14 75 13 13 65 13 13 50 12 12 30 11 11 25 11 11 140 14 14 115 14 14 140 16 16 120 16 16 100 15 15 70 13 13 115 16 16 85 16 16 90 15 15 70 15 15 65 15 15 55 15 15 70 13 13 65 13 13

≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

60 50

C TiCN

FIRE/nanoFIRE

13 13

55 45

12 12

TiAlN SuperA

12 12

GUN DRILL FAX INQUIRY / ORDER FORM

PHOTOCOPY, COMPLETE AND FAX

❏ Inquiry

❏ Order

Deep hole gun drill:

❑ EB 100

Number required:

tool __________________ items insert ________________ items sup. strip _____________ items

❏ Repeat order, no. of initial order ❑ EB 80 ❑ polished ❑ fast service

GUN DRILLS

❑ ZB 80 ❑ polished

❑ EB 800

standard collar

driver length

15 mm

EB 100

total length flute length

mm driver

EB 80 ZB 80

❑ flute polished

Drawing of lay-out

required in special cases only

Driver:

❑ no

❑ code-no.:

❑ to enclosed drawing

Coating:

❑ TiN

❑ Fire

❑ TiCN

Workpiece:

drill. depth:______

Machine type:

❑ deep hole drilling machine ❑ pilot hole

❑ conventional machine tool ❑ drilling bush

Coolant:

❑ deep hole drilling oil pressure _______ bar

❑ soluble oil quantity_________ l/min

Company:

❑ TiAlN

hole tolerance:_____________

❑ SuperA

❑ ____________

material/designation: _______________

Company stamp:

Telephone/fax: Contact:

Signature:

TAPS MICRO THREAD MILLING CUTTER

GUN NOSE SPIRAL FLUTE

TAPS

BLIND HOLE UNC THREAD

DIES

THROUGH HOLE BSW THREAD

METRIC BSP THREAD

THREAD FORMERS

NPT THREAD

PITCH

FINE THREAD

BSPT THREAD

FLUTELESS

TAPPING UNF THREAD

Tens Strength Mpa (N/mm2)

Hardness HB

Structural steels - mild steel, 250 and 350 plate

≤ 850

Free cutting steels - 1020, S1214, S1213, S12L13, S12L14

Colour Ring

Material Groups

Cutting Speed Vc m/min * Solid Carbide

HSS-E

HSS-E-PM

10 - 15

15 - 20

30 - 50

≤ 1000

10 - 20

15 - 25

30 - 50

Unalloyed case hardened steels - 1010, 1015

≤ 750

10 - 15

15 - 20

30 - 50

Un9/9/2008d Heat treatable steels - 1035, 1045, 1055, 1060, 1025

≤ 850

10 - 15

15 - 20

30 - 50

850 - 1200

8 - 12

10 - 15

25 - 40

850 - 1200

8 - 12

10 - 15

25 - 40

Alloyed tool steels - H11, H13, P20, D2, D3

≤ 1000

6 - 10

8 - 12

25 - 40

High speed tool steels M2, M3, M35, M45

650 - 1000

6 - 10

8 - 12

25 - 40

Stainless and acid resistant steels - Sulphured - 410S, 430F, 630

≤ 850

6 - 12

8 - 15

30 - 50

- Austentic -302, 303, 304, 310, 316, 316Ti, 321

≤ 850

6 - 12

8 - 15

30 - 50

- Marttensitic - 410, 410X, 416, 420, 420C, 431, 440C

≤ 850

6 - 12

8 - 15

30 - 50

Structural steels - mild steel, 250 and 350 plate

≤ 800

10 - 15

15 - 20

30 - 50

Free cutting steels - 1020, S1214, S1213, S12L13, S12L14

≤ 1000

10 - 20

15 - 25

30 - 50

Case hardened steels

≤ 1000

10 - 15

15 - 20

30 - 50

Heat treatable steels

≤ 1200

10 - 15

15 - 20

30 - 50

Nitriding steels

≤ 1200

10 - 15

15 - 20

30 - 50

Alloyed case hardened steels - 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A Alloyed heat treatable steels - 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

Spheroidal graphite cast iron - GGG40, GGG50, GGG60, GGG70

≤ 240

10 - 20

15 - 25

30 - 50

Aluminium and Al-Alloys

≤ 400

15 - 20

20 - 25

30 - 50

Al wrought alloys

≤ 400

15 - 20

20 - 25

30 - 50

Alcast alloys ≤ 10 % Si

≤ 600

15 - 20

20 - 25

30 - 50

> 10 % Si

≤ 600

15 - 20

20 - 25

25 - 40

Cast iron - GG10, GG15, GG20, GG25, GG30, GG35, GG40

≤ 240

15 - 20

20 - 25

30 - 40

Spheroidal graphite cast iron - GGG40, GGG50, GGG60, GGG70

≤ 240

15 - 20

20 - 25

30 - 40

Malleable cast iron - 32510, 50005, Nodular Iron

≤ 240

15 - 20

20 - 25

30 - 40

Brass short chipping

≤ 600

10 - 15

15 - 20

25 - 30

Brass long chipping

≤ 600

10 - 15

15 - 20

25 - 30

5 - 10

15 - 20

25 - 30

Magnesium alloys

≤ 450

30 - 50

Titanium and Ti-alloys

≤ 1200

Plastics

TAPS

RECOMMENDATION CHART FOR TAPS

40 - 60 2-8

Ni alloys

2-8

* With coated tools cutting speed may be increased up to 50%

bright

steam tempered

universal

general steel

nitrided tool steel

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

METRIC GUN NOSE TAPS

THROUGH HOLE

TAPS

Guhring no.

803

5733

5716

5736

Standard

789

790

804

5558

DIN 371

Tool material

HSS-E

HSS-E-PM

Surface Type Form

Cutting direction

right-hand

left-hand

Tolerance

right-hand

ISO 2 / 6H

Application Cutting speed m/min

10-15

8-12

mm M1.4 M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M30 M36

mm 0.30 0.35 0.40 0.45 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.50 4.00

mm 2.50 2.50 2.80 2.80 3.50 4.50 6.00 6.00 8.00 10.00 9.00 11.00 12.00 14.00 16.00 18.00 18.00 22.00 28.00

mm 2.10 2.10 2.10 2.10 2.70 3.40 4.90 4.90 6.20 8.00 7.00 9.00 9.00 11.00 12.00 14.50 14.50 18.00 22.00

mm 1.10 1.25 1.60 2.05 2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 26.50 32.00

mm 40.00 40.00 45.00 50.00 56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00 180.00 200.00

mm 7.00 8.00 8.00 9.00 10.00 13.00 16.00 19.00 22.00 24.00 24.00 26.00 26.00 30.00 32.00 32.00 36.00 40.00 50.00

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • • • • •

P AlCrN

stainless steel

TiN

• • • • • • • • • • •

C TiCN

Aluminium

• • •

• • • • • •

• • • • • • • •

Carbo cast materials

816

877

5559

THROUGH HOLE

879

2876

5561

2877

805

5557

817

807

5550

DIN 371 HSS-E

HSS-E-PM

TAPS

METRIC GUN NOSE TAPS

HSS-E

10-15

right-hand ISO 2 / 6H 8-12

8-12

6-12

10-15

AVAILABILITY

• • •

• • • • • •

• • •

• • • • • • • •

• • •

• • • • • • • • •

•

bright

steam tempered

universal

general steel

nitrided tool steel

• • • • • •

P AlCrN

stainless steel

TiN

• • • • • •

C TiCN

Aluminium

Carbo cast materials

METRIC SPIRAL TAPS

BLIND HOLE

TAPS

Guhring no.

810

5734

5717

5722

Standard

786

787

811

DIN 371

Tool material

HSS-E

HSS-E-PM

HSS-E

Surface Type Form

Cutting direction

right-hand

left-hand

Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

8-12

mm M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M30

mm 0.40 0.45 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.50

mm 2.80 2.80 3.50 4.50 6.00 6.00 8.00 10.00 9.00 11.00 12.00 14.00 16.00 18.00 18.00 22.00

mm 2.10 2.10 2.70 3.40 4.90 4.90 6.20 8.00 7.00 9.00 9.00 11.00 12.00 14.50 14.50 18.00

mm 1.60 2.05 2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 26.50

mm 45.00 50.00 56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00 180.00

mm 8.00 9.00 10.00 7.50 8.50 11.00 14.00 16.00 18.50 20.00 20.00 25.00 25.00 27.00 30.00 35.00

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • •

• • • • • • •

• • • • • • • • • •

• • • • • • • • •

• • •

•

50º Helix for maximum tool life

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

• • •

Carbo cast materials

5552

823

5553

910

BLIND HOLE

909

889

5555

890

812

5551

824

DIN 371 HSS-E

HSS-E

HSS-E-PM

TAPS

METRIC SPIRAL TAPS

HSS-E VA

10-15

right-hand ISO 2 / 6H 8-12

8-12

6-12

AVAILABILITY

• • • • • •

• • • • •

bright

• • •

• • • • • •

• • • • •

• • •

•

• •

•

steam tempered

universal

general steel

nitrided tool steel

• • •

P AlCrN

stainless steel

• • • • • • • • • •

TiN

C TiCN

Aluminium

• • •

Carbo cast materials

METRIC FINE GUN NOSE TAPS

THROUGH HOLE

TAPS

Guhring no.

827

Standard

DIN 374

Tool material

HSS-E

Surface Type

Form

Cutting direction

right-hand

Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

Code

mm M3 M4 M5 M6 M6 M8 M8 M8 M10 M10 M10 M12 M12 M12 M14 M14 M14 M16 M16 M18 M18 M20 M20 M20 M22 M22 M24 M24 M24 M30 M32

mm 0.35 0.50 0.50 0.50 0.75 0.50 0.75 1.00 0.75 1.00 1.25 1.00 1.25 1.50 1.00 1.25 1.50 1.00 1.50 1.00 1.50 1.00 1.50 2.00 1.50 2.00 1.00 1.50 2.00 1.50 1.50

mm 2.20 2.80 3.50 4.50 4.50 6.00 6.00 6.00 7.00 7.00 7.00 9.00 9.00 9.00 11.00 11.00 11.00 12.00 12.00 14.00 14.00 16.00 16.00 16.00 18.00 18.00 18.00 18.00 18.00 22.00 22.00

mm 2.65 3.50 4.50 5.50 5.25 7.50 7.25 7.00 9.25 9.00 8.80 11.00 10.80 10.50 13.00 12.80 12.50 15.00 14.50 17.00 16.50 19.00 18.50 18.00 20.50 20.00 23.00 22.50 22.00 28.50 30.50

mm 56.00 63.00 70.00 80.00 80.00 80.00 80.00 90.00 90.00 90.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 110.00 110.00 125.00 125.00 140.00 125.00 140.00 140.00 140.00 140.00 150.00 150.00

mm 7.00 8.00 10.00 13.00 13.00 14.00 14.00 18.00 18.00 18.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 22.00 22.00 25.00 25.00 25.00 25.00 32.00 25.00 32.00 28.00 28.00 28.00 28.00 28.00

no. 3.002 4.003 5.003 6.003 6.004 8.003 8.004 8.005 10.004 10.005 10.006 12.005 12.006 12.007 14.005 14.006 14.007 16.005 16.007 18.005 18.007 20.005 20.007 20.008 22.007 22.008 24.005 24.007 24.008 30.007 32.007

bright

2.10 2.70 3.40 3.40 4.90 4.90 4.90 5.50 5.50 5.50 7.00 7.00 7.00 9.00 9.00 9.00 9.00 9.00 11.00 11.00 12.00 12.00 12.00 14.50 14.50 14.50 14.50 14.50 18.00 18.00

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

METRIC FINE SPIRAL TAPS

BLIND HOLE

Guhring no.

TAPS

834

Standard

DIN 374

Tool material

HSS-E

Surface Type

Form

Cutting direction

right-hand

Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

Code

mm M3 M4 M5 M6 M6 M8 M8 M10 M10 M12 M12 M12 M14 M14 M14 M16 M16 M18 M18 M20 M22 M24 M24 M30

mm 0.35 0.50 0.50 0.50 0.75 0.75 1.00 1.00 1.25 1.00 1.25 1.50 1.00 1.25 1.50 1.00 1.50 1.00 1.50 1.50 1.50 1.50 2.00 1.50

mm 2.20 2.80 3.50 4.50 4.50 6.00 6.00 7.00 7.00 9.00 9.00 9.00 11.00 11.00 11.00 12.00 12.00 14.00 14.00 16.00 18.00 18.00 18.00 22.00

mm 2.65 3.50 4.50 5.50 5.25 7.25 7.00 9.00 8.80 11.00 10.80 10.50 13.00 12.80 12.50 15.00 14.50 17.00 16.50 18.50 20.50 22.50 22.00 28.50

mm 56.00 63.00 70.00 80.00 80.00 80.00 90.00 90.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 110.00 110.00 125.00 125.00 140.00 140.00 150.00

mm 4.00 5.00 5.00 5.00 8.00 8.00 11.00 11.00 14.00 11.00 15.00 15.00 11.00 15.00 15.00 11.00 15.00 12.00 16.00 16.00 16.00 16.00 22.00 20.00

no. 3.002 4.003 5.003 6.003 6.004 8.004 8.005 10.005 10.006 12.005 12.006 12.007 14.005 14.006 14.007 16.005 16.007 18.005 18.007 20.007 22.007 24.007 24.008 30.007

bright

2.10 2.70 3.40 3.40 4.90 4.90 5.50 5.50 7.00 7.00 7.00 9.00 9.00 9.00 9.00 9.00 11.00 11.00 12.00 14.50 14.50 14.50 18.00

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

METRIC RECOIL TAPS

THROUGH HOLE

BLIND HOLE

TAPS

Guhring no.

1010

1011

Standard

DIN 40435

Tool material

HSS-E

Surface Type

Form Cutting direction

right-hand

10-15

Tolerance Application Cutting speed m/min

mm M4 M5 M6 M8 M10 M12 M14 M16

mm 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00

mm 6.00 6.00 8.00 10.00 9.00 11.00 12.00 14.00

mm 4.90 4.90 6.20 8.00 7.00 9.00 9.00 11.00

mm 4.20 5.25 6.30 8.40 10.50 12.50 14.50 16.50

mm 70.00 80.00 90.00 100.00 100.00 110.00 110.00 125.00

mm 12.00 14.00 17.00 20.00 20.00 30.00 26.00 33.00

M4 M5 M6 M8 M10 M12 M14 M16

0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00

6.00 6.00 8.00 10.00 9.00 11.00 12.00 14.00

4.90 4.90 6.20 8.00 7.00 9.00 9.00 11.00

4.20 5.25 6.30 8.40 10.50 12.50 14.50 16.50

70.00 80.00 90.00 100.00 100.00 110.00 110.00 125.00

7.50 8.50 11.00 14.00 16.00 18.50 20.00 20.00

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • •

• • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

THROUGH HOLE

BLIND HOLE

Guhring no.

998

5718

Standard

Guhring std.

Tool material

TAPS

METRIC LONG SERIES TAPS

HSS-E

Surface Type

Form

Cutting direction

right-hand

Tolerance

ISO 2 / 6H

6-10

Application Cutting speed m/min

mm M3 M4 M5 M6 M8 M10 M12 M14 M16 M20

mm 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50

mm 2.20 2.80 3.50 4.50 6.00 7.00 9.00 11.00 12.00 16.00

mm 2.10 2.70 3.40 4.90 5.50 7.00 9.00 9.00 12.00

mm 2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 17.50

mm 70.00 90.00 100.00 110.00 125.00 140.00 180.00 200.00 200.00 250.00

mm 18.00 22.00 24.00 25.00 28.00 30.00 35.00 35.00 40.00 45.00

M3 M4 M5 M6 M8 M10 M12 M16 M20

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50

3.50 4.50 6.00 6.00 6.00 7.00 9.00 12.00 16.00

2.70 3.40 4.90 4.90 4.90 5.50 7.00 9.00 12.00

2.50 3.30 4.20 5.00 6.80 8.50 10.20 14.00 17.50

112.00 112.00 125.00 125.00 140.00 160.00 180.00 220.00 280.00

6.00 7.50 8.50 11.00 14.00 16.00 18.50 20.00 25.00

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • •

• • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

MACHINE TAPS FOR OVERSIZE THREADS

THROUGH HOLE

TAPS

Guhring no.

5009

Standard

Guhring std.

Tool material

HSS-E

Surface Cutting direction

right-hand

Tolerance

ISO 2 / 6H

Application Cutting speed m/min

6-10 OVERSIZE TAP +0.4mm

mm M12 M16 M20 M24

mm 1.75 2.00 2.50 3.00

mm 9.00 12.00 16.00 18.00

mm 7.00 9.00 12.00 14.50

mm 10.40 14.20 17.70 21.40

mm 110.00 110.00 140.00 160.00

mm 24.00 26.00 32.00 36.00

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

THROUGH HOLE

Guhring no.

2944

Standard

Guhring std.

Tool material

Solid carbide

Surface

Type

Form

TAPS

METRIC TAPS, HARDENED MATERIALS <62 HRC

Cutting direction

right-hand

Tolerance

ISO 2 / 6H

Application

Hardened Materials

Cutting speed m/min

2-4

M3 M4 M5 M6 M8 M10 M12

0.50 0.70 0.80 1.00 1.25 1.50 1.75

3.500 4.500 6.000 6.000 8.000 10.000 12.000

2.70 3.40 4.90 4.90 6.20 8.00 9.00

bright

2.600 56.00 3.400 63.00 4.300 70.00 5.100 80.00 6.900 90.00 8.600 100.00 10.400 110.00

steam tempered

universal

general steel

AVAILABILITY • • • • • • •

12.00 14.00 17.00 20.00 20.00 24.00 28.00

nitrided tool steel

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

MICRO THREAD MILLING CUTTER TAPS

Guhring no.

4226

Standard

Guhring std.

Tool material

Solid carbide

Carbide grade

K/P

Surface finish

Type

SP M

Thread length

3xD

Shank form

Cutting direction

right-hand

60°

M1.6 M1.8 M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12

mm 0.35 0.35 0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75

mm 1.20 1.40 1.55 1.95 2.40 2.80 3.20 4.00 4.80 5.95 7.80 9.00

mm 3.00 3.00 3.00 3.00 6.00 6.00 6.00 6.00 6.00 6.00 8.00 10.00

bright

steam tempered

universal

mm threads mm 39.00 3 4.80 39.00 3 5.40 39.00 3 6.00 39.00 3 7.50 58.00 3 9.50 58.00 3 11.00 58.00 3 12.50 58.00 3 16.00 58.00 3 20.00 58.00 3 24.00 73.00 3 33.00 84.00 3 38.00

general steel

nitrided tool steel

AVAILABILITY

3 3 4 4 4 4 4 4 4 4 4 4

• • • • • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

METRIC THREAD MILLING CUTTERS Guhring no.

Guhring std.

Tool material

Solid carbide

Carbide grade

TAPS

4133

Standard

K/P

Surface

Cutting direction

right-hand

Type

TMSP

Thread length

2xD

Application Cutting speed m/min

50-100

45 °

Thread

60°

d1 d3

Thread

60°

Thread

M6 M8 M10 M12 M14 M16 M20

1.00 4.80 6.00 5.00 1.25 6.40 8.00 6.80 1.50 7.95 10.00 8.50 1.75 9.95 10.00 10.20 2.00 11.20 12.00 12.00 2.00 12.80 14.00 14.00 2.50 14.95 16.00 17.50

54.00 62.00 74.00 74.00 90.00 90.00 102.00

13.50 18.10 21.80 25.40 31.00 35.00 41.30

Standard

Type

Code

AVAILABILITY

no. 3 3 3 4 4 4 4

• • • • • • •

6.000 8.000 10.000 12.000 14.000 16.000 20.000

Tool illustration

Tool material Surface Thread length

Sizes

Guhring no.

Thread milling cutters for UNC-threads Guhring std.

TM SP

Solid Carbide

2xD

10-24 - 1-8

4128

Solid Carbide

2xD

10-32 - 1-12

4129

Solid Carbide

2xD

1/16 - 11 1/2

4130

Solid Carbide

2xD

G 1/8 - G 3/8

3748

Thread milling cutters for UNF-threads Guhring std.

TM SP

Thread milling cutters for NPT-threads Guhring std.

TM SP

Thread milling cutters for BSP-threads Guhring std.

TM SP

*Other thread milling cutters are available on request.

bright

steam tempered

universal

general steel

nitrided tool steel

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

MACHINE TAPS FOR UNC THREADS TAPS

Guhring no. Standard

THROUGH HOLE

873

5725

878

1980

1985

DIN 371

DIN 376

DIN 371

DIN 376

Tool material

HSS-E

Surface Type

Form Cutting direction Tolerance

right-hand

10-15

6-12

Application Cutting speed m/min

Code

inch

no.

No.2 No.3 No.4 No.5 No.6 No.8 No.10 No.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1" 1 1/8 1 1/4 1 1/2

56 48 40 40 32 32 24 24 20 18 16 14 13 12 11 10 9 8 7 7 6

2.80 2.80 3.50 3.50 4.00 4.50 6.00 6.00 7.00 8.00 10.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00 18.00 18.00 28.00

2.10 2.10 2.70 2.70 3.00 3.40 4.90 4.90 5.50 6.20 8.00 6.20 7.00 9.00 9.00 11.00 14.50 14.50 18.00 18.00 22.00

1.85 2.10 2.35 2.65 2.85 3.50 3.90 4.50 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 28.00 34.00

45.00 50.00 56.00 56.00 56.00 63.00 70.00 80.00 80.00 90.00 100.00 100.00 110.00 110.00 110.00 125.00 140.00 160.00 180.00 180.00 200.00

9.00 9.00 11.00 11.00 12.00 13.00 14.00 16.00 16.00 18.00 20.00 22.00 25.00 30.00 30.00 33.00 35.00 38.00 44.00 44.00 50.00

2.184 2.515 2.845 3.175 3.505 4.166 4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400 28.575 31.750 38.100

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • •

• • • • •

• • • • • • • •

• • • • •

• • • • • • • • • •

• •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

• • • • •

Carbo cast materials

MACHINE TAPS FOR UNC THREADS

Standard

876

5726

881

1981

1986

DIN 371

DIN 376

DIN 371

DIN 376

Tool material

TAPS

Guhring no.

BLIND HOLE

HSS-E

Surface Type

Form Cutting direction Tolerance

right-hand

10-15

6-12

Application Cutting speed m/min

Code

inch

no.

No.2 No.3 No.4 No.5 No.6 No.8 No.10 No.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1"

56 48 40 40 32 32 24 24 20 18 16 14 13 12 11 10 9 8

2.80 2.80 3.50 3.50 4.00 4.50 6.00 6.00 7.00 8.00 10.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00

2.10 2.10 2.70 2.70 3.00 3.40 4.90 4.90 5.10 6.20 7.00 6.20 7.00 9.00 9.00 11.00 14.50 14.50

1.85 2.10 2.35 2.65 2.65 3.50 3.90 4.50 5.10 6.60 8.00 9.40 10.75 14.00 13.50 16.50 19.50 22.25

45.00 50.00 56.00 56.00 56.00 63.00 70.00 80.00 80.00 90.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 160.00

8.00 9.00 6.50 6.50 8.00 8.00 11.00 11.00 13.00 14.00 16.00 18.00 20.00 21.00 24.00 25.00 28.00 32.00

2.184 2.515 2.845 3.175 3.505 4.166 4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY •

•

• • • • • • • • •

•

• • • •

• • •

• • • •

• • • • •

• • • • • • •

• •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

• • • • •

Carbo cast materials

MACHINE TAPS FOR UNF THREADS TAPS

Guhring no.

THROUGH HOLE

5727

908

Standard

1990

DIN 374

Tool material

HSS-E

Surface Type

Form Cutting direction Tolerance

right-hand

10-15

6-12

Application Cutting speed m/min

Code

inch

no.

No.4 No.6 No.8 No.10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2

48 40 36 32 28 24 24 20 20 18 18 16 14 12 12 12 12

2.20 2.50 2.80 3.50 4.50 6.00 7.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00 22.00 22.00 28.00

2.10 2.10 2.70 3.40 4.90 5.50 6.20 7.00 9.00 9.00 11.00 14.50 14.50 18.00 18.00 22.00

2.40 2.95 3.50 4.10 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.45 23.25 26.50 29.50 36.00

56.00 56.00 63.00 70.00 80.00 90.00 90.00 100.00 100.00 100.00 100.00 110.00 125.00 140.00 150.00 150.00 170.00

10.00 11.00 12.00 14.00 16.00 18.00 18.00 22.00 20.00 22.00 22.00 25.00 25.00 28.00 28.00 28.00 30.00

2.845 3.505 4.166 4.826 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400 28.575 31.750 38.100

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • •

•

• •

• • • •

• • • • • •

• • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

•

Carbo cast materials

Guhring no.

BLIND HOLE

5728

911

Standard

1991

DIN 374

Tool material

TAPS

MACHINE TAPS FOR UNF THREADS

HSS-E

Surface Type

Form Cutting direction Tolerance

right-hand

10-15

6-12

Application Cutting speed m/min

Code

inch

no.

No.4 No.6 No.8 No.10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8

48.00 40.00 36.00 32.00 28.00 24.00 24.00 20.00 20.00 18.00 18.00 16.00 14.00

2.20 2.50 2.80 3.50 4.50 6.00 7.00 8.00 9.00 11.00 12.00 14.00 18.00

2.10 2.10 2.70 3.40 4.90 5.50 6.20 7.00 9.00 9.00 11.00 14.50

2.40 2.95 3.50 4.10 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.40

56.00 56.00 63.00 70.00 80.00 90.00 90.00 90.00 100.00 100.00 100.00 110.00 125.00

6.00 11.00 10.00 12.00 14.00 18.00 18.00 18.00 20.00 22.00 22.00 25.00 25.00

2.845 3.505 4.166 4.826 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • • •

• • •

•

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

• • • • • • •

Carbo cast materials

MACHINE TAPS FOR BSP THREADS TAPS

Guhring no.

THROUGH HOLE

962

967

Standard

5731

DIN 5156

Tool material

HSS-E

Surface Cutting direction

right-hand

Type

Form

10-15

8-10

Application Cutting speed m/min

Code

inch

no.

G1/16 G1/8 G1/4 G3/8 G1/2 G3/4 G 1”

28 28 19 19 14 14 11

6.00 7.00 11.00 12.00 16.00 20.00 25.00

4.90 5.50 9.00 9.00 12.00 16.00 20.00

6.80 8.80 11.80 15.25 19.00 24.50 30.75

90.00 90.00 100.00 100.00 125.00 140.00 160.00

18.00 18.00 20.00 22.00 25.00 28.00 30.00

7.723 9.728 13.157 16.662 20.955 26.441 33.249

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • •

P AlCrN

stainless steel

• • • • • •

TiN

C TiCN

Aluminium

• • • • • •

Carbo cast materials

Guhring no.

BLIND HOLE

965

968

Standard

5732

DIN 5156

Tool material

TAPS

MACHINE TAPS FOR BSP THREADS

HSS-E

Surface Cutting direction

right-hand

Type

Form

10-15

8-10

Application Cutting speed m/min

Code

inch

no.

G1/16 G1/8 G1/4 G3/8 G1/2 G3/4 G 1”

28 28 19 19 14 14 11

6.00 7.00 11.00 12.00 16.00 20.00 25.00

4.90 5.50 9.00 9.00 12.00 16.00 20.00

6.80 8.80 11.80 15.25 19.00 24.50 30.75

90.00 90.00 100.00 100.00 125.00 140.00 160.00

11.00 11.00 14.00 14.00 18.00 20.00 24.00

7.723 9.728 13.157 16.662 20.955 26.441 33.249

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • •

P AlCrN

stainless steel

• • • • • • •

TiN

C TiCN

Aluminium

• • • • • •

Carbo cast materials

MACHINE TAPS FOR BSW THREADS

THROUGH HOLE

TAPS

Guhring no. Standard

2892

2893

DIN 371

DIN 376

Tool material

HSS-E

Surface Type

Form Cutting direction

right-hand

10-15

Application Cutting speed m/min

Code

inch

no.

W1/8 W5/32 W3/16 W1/4 W5/16 W3/8

40 32 24 20 18 16

3.50 4.50 6.00 7.00 8.00 10.00

2.70 3.40 4.90 5.50 6.20 8.00

2.50 3.20 3.60 5.10 6.50 7.90

56.00 63.00 70.00 80.00 90.00 100.00

11.00 13.00 11.00 13.00 14.00 20.00

3.175 3.969 4.762 6.350 7.938 9.525

W7/16 W1/2 W9/16 W5/8 W3/4 W7/8 W1

14 12 12 11 10 9 8

8.00 9.00 11.00 12.00 14.00 18.00 18.00

6.20 7.00 9.00 9.00 11.00 14.50 14.50

9.20 10.50 12.00 13.50 16.25 19.25 22.00

100.00 110.00 110.00 110.00 125.00 140.00 160.00

22.00 25.00 30.00 30.00 33.00 35.00 38.00

11.113 12.700 14.287 15.876 19.051 22.226 25.401

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • •

• • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

BLIND HOLE

Guhring no. Standard

2847

2848

DIN 371

DIN 376

Tool material

TAPS

MACHINE TAPS FOR BSW THREADS

HSS-E

Surface Type

Form Cutting direction

right-hand

10-15

Application Cutting speed m/min

Code

inch

no.

W1/8 W3/16 W1/4 W5/16 W3/8

40 24 20 18 16

3.50 6.00 7.00 8.00 10.00

2.70 4.90 5.50 6.20 8.00

2.50 3.60 5.10 6.50 7.90

56.00 70.00 80.00 90.00 100.00

7.00 11.00 13.00 14.00 16.00

3.175 4.762 6.350 7.938 9.525

W3/8 W7/16 W1/2 W9/16 W5/8 W3/4 W7/8 W1

16 14 12 12 11 10 9 8

7.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00

5.50 9.20 10.50 12.00 13.50 16.25 19.25 22.00

7.90 9.20 10.50 12.00 13.50 16.25 19.25 22.00

100.00 100.00 110.00 110.00 110.00 125.00 140.00 160.00

16.00 18.00 20.00 21.00 24.00 25.00 38.00 32.00

9.525 11.113 12.700 14.287 15.876 19.051 22.226 25.401

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • •

• • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

MACHINE TAPS FOR BSPT THREADS

THROUGH HOLE

TAPS

Guhring no.

5007

Standard

Guhring std.

Tool material

HSS-E

Surface Cutting direction

right-hand

Tolerance Application Cutting speed m/min

5-10

Code

inch

no.

1/8 1/4 3/8 1/2 3/4 1

28 19 19 14 14 11

7.00 11.00 12.00 16.00 20.00 25.00

5.50 9.00 9.00 12.00 16.00 20.00

bright

8.40 63.00 15.00 11.20 63.00 21.00 14.75 70.00 21.00 18.25 80.00 27.00 23.75 100.00 27.00 30.00 110.00 32.00

steam tempered

universal

general steel

AVAILABILITY

9.728 13.157 16.662 20.955 26.441 33.249

nitrided tool steel

• • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

BLIND HOLE

Guhring no.

973

1087

Standard

Guhring std.

Tool material

TAPS

MACHINE TAPS FOR NPT THREADS

HSS-E

Surface Type

Form Cutting direction

right-hand

5-10

3-8

Application Cutting speed m/min

Code

inch

no.

1/16 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2

27 27 18 18 14 14 11.5 11.5 11.5 11.5

6.00 7.00 11.00 12.00 16.00 20.00 25.00 32.00 36.00 36.00

4.90 5.50 9.00 9.00 12.00 16.00 20.00 24.00 29.00 29.00

6.15 8.40 11.10 14.30 17.90 23.30 29.00 37.70 43.70 55.60

56.00 63.00 63.00 70.00 80.00 100.00 110.00 125.00 140.00 160.00

14.00 15.00 21.00 21.00 27.00 27.00 32.00 33.00 33.00 33.00

8.190 10.620 14.140 17.570 21.900 27.230 34.180 42.900 48.940 61.000

1/8 1/4 3/8 1/2 3/4

27 18 18 14 14

11.00 14.00 16.00 18.00 22.00

9.00 11.00 12.00 14.50 18.00

8.50 11.20 14.40 18.00 23.40

90.00 100.00 110.00 125.00 140.00

15.00 21.00 21.00 27.00 27.00

10.620 14.140 17.570 21.900 27.230

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • •

• • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

FLUTELESS MACHINE TAPS FOR METRIC THREADS

THROUGH HOLE

BLIND HOLE

(THREAD FORMERS) TAPS

Guhring no. Standard

782

793

921

5598

5599

DIN 371

DIN 376

Tool material

HSS-E

Surface Type Form Cutting direction Tolerance

right-hand

6HX

12-18

10-15

Application Cutting speed m/min

P d1

l2 l1

P d1

l2 l1

M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12 M14 M16

0.25 0.25 0.30 0.35 0.35 0.35 0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00

2.50 2.50 2.50 2.50 2.50 2.50 2.80 2.80 3.50 4.00 4.50 6.00 6.00 8.00 10.00 9.00 11.00 12.00

2.10 2.10 2.10 2.10 2.10 2.10 2.10 2.10 2.70 3.00 3.40 4.90 4.90 6.20 8.00 7.00 9.00 9.00

0.90 1.10 1.28 1.46 1.55 1.66 1.80 2.30 2.80 3.25 3.70 4.65 5.55 7.40 9.25 11.25 13.10 15.10

40.00 40.00 40.00 40.00 40.00 40.00 45.00 50.00 56.00 56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00

4.00 4.80 5.60 6.40 6.80 7.20 8.00 9.00 10.00 12.00 12.00 14.00 16.00 18.00 20.00 24.00 26.00 26.00

bright

100

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • •

• • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

FLUTELESS MACHINE TAPS FOR METRIC THREADS

THROUGH HOLE

BLIND HOLE

Guhring no. Standard Tool material

1347

1587

1589

DIN 371

DIN 376

HSS-E-PM

TAPS

(THREAD FORMERS)

HSS-E

Surface Type

Form Cutting direction Tolerance

right-hand

6HX

12-18

6-12

Application Cutting speed m/min

P d1

l2 l1

P d1

l2 l1

M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M16

0.40 0.45 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00

2.80 2.80 3.50 4.50 6.00 6.00 8.00 10.00 9.00 12.00

2.10 2.10 2.70 3.40 4.90 4.90 6.20 8.00 7.00 9.00

1.85 2.30 2.80 3.70 4.65 5.55 7.40 9.30 11.20 15.10

45.00 50.00 56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00

8.00 9.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 26.00

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • •

• • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

101

FLUTELESS MACHINE TAPS FOR UNC THREADS

THROUGH HOLE

BLIND HOLE

(THREAD FORMERS) TAPS

Guhring no. Standard

1582

1583

DIN 371

DIN 376

Tool material

HSS-E

Surface Type

Form Cutting direction

right-hand

2BX

10-15

Tolerance Application Cutting speed m/min

P d1

l2 l1

P d1

l2 l1

Code

inch

no.

No.6 No.8 No.10 No.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

32 32 24 24 20 18 16 14 13 12 11 10

3.00 3.40 6.00 6.00 7.00 8.00 10.00 8.00 9.00 11.00 12.00 14.00

3.00 3.40 4.90 4.90 5.50 6.20 8.00 6.20 7.00 9.00 9.00 11.00

3.15 3.80 4.35 5.00 5.75 7.30 8.80 10.30 11.80 13.30 14.80 17.90

56.00 63.00 70.00 80.00 80.00 90.00 100.00 100.00 110.00 110.00 110.00 125.00

12.00 13.00 14.00 16.00 16.00 18.00 20.00 22.00 25.00 30.00 30.00 33.00

3.505 4.166 4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050

bright

102

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

FLUTELESS MACHINE TAPS FOR UNF THREADS

THROUGH HOLE

BLIND HOLE

Guhring no. Standard

1584

1585

DIN 2184-1

Tool material

TAPS

(THREAD FORMERS)

HSS-E

Surface Type

Form Cutting direction

right-hand

2BX

10-15

Tolerance Application Cutting speed m/min

P d1

l2 l1

P d1

l2 l1

Code

inch

no.

No.8 No.10 No.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

36 32 28 28 24 24 20 20 18 18 16

3.850 4.450 5.100 5.950 7.450 9.050 10.500 12.100 13.650 15.250 18.300

63.00 70.00 80.00 80.00 90.00 100.00 100.00 100.00 100.00 100.00 110.00

12.00 14.00 16.00 16.00 18.00 18.00 22.00 20.00 22.00 22.00 25.00

4.166 4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050

bright

4.500 3.40 6.000 4.90 6.000 4.90 7.000 5.50 8.000 6.20 10.000 8.00 8.000 6.20 9.000 7.00 11.000 9.00 12.000 9.00 14.000 11.00

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

103

HAND TAPS FOR METRIC THREADS

THROUGH HOLE

BLIND HOLE

(SERIES TAPS) TAPS

Guhring no.

861

862

Standard

863

864

DIN 352

Tool material

HSS

Surface Type

Description

Set of taps

First

Second

Bottoming

Cutting direction

right-hand

Tolerance

ISO 2 / 6H

FIRST AND SECOND TAP IS UNDERSIZE

UNDERSIZE

M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M24

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 3.00

3.50 4.50 6.00 6.00 6.00 7.00 9.00 11.00 12.00 14.00 16.00 18.00

2.70 3.40 4.90 4.90 4.90 5.50 7.00 9.00 9.00 11.00 12.00 14.50

2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50 21.00

40.00 45.00 50.00 56.00 63.00 70.00 75.00 80.00 80.00 95.00 95.00 110.00

10.00 12.00 14.00 16.00 17.00 20.00 24.00 26.00 26.00 30.00 32.00 36.00

bright

104

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • •

P AlCrN

stainless steel

• • • • • • • • • • • •

TiN

C TiCN

Aluminium

• • • • • • • • • • • •

Carbo cast materials

• • • • • • • • • • • •

HAND TAPS FOR UNC THREADS

THROUGH HOLE

BLIND HOLE

Guhring no.

981

984

Standard

DIN 352

Tool material

TAPS

(SERIES TAPS)

HSS

Surface Type

Description

Set of taps

Bottoming

Cutting direction

right-hand

Tolerance

FIRST AND SECOND TAP IS UNDERSIZE

Code

inch

no.

No.4 No.5 No.6 No.8 No.10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 2

40 40 32 32.5 24 20 18 16 14 13 12 11 10 9 8 7 4.5

3.50 4.00 4.00 4.50 6.00 6.00 6.00 7.00 8.00 9.00 11.00 12.00 16.00 18.00 18.00 22.00 40.00

2.70 3.00 3.00 3.40 4.90 4.90 4.90 5.50 6.20 7.00 9.00 9.00 12.00 14.50 14.50 18.00 32.00

2.35 2.65 2.85 3.50 3.90 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 45.00

40.00 40.00 45.00 45.00 50.00 56.00 63.00 70.00 70.00 75.00 80.00 80.00 95.00 100.00 110.00 125.00 180.00

11.00 11.00 12.00 13.00 14.00 16.00 18.00 20.00 22.00 25.00 30.00 30.00 33.00 25.00 38.00 44.00 65.00

2.845 3.175 3.505 4.166 4.826 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400 28.575 50.800

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • • • •

• • • • • • • • • • • •

• •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

105

HAND TAPS FOR UNF THREADS

THROUGH HOLE

BLIND HOLE

(SERIES TAPS) TAPS

Guhring no.

985

987

Standard

DIN 2181

Tool material

HSS

Surface Type

Description

Set of taps

Bottoming

Cutting direction

right-hand

Tolerance

FIRST TAP IS UNDERSIZE

Code

inch

no.

No.10 1/4 5/16 3/8 7/16 1/2 5/8

32 28 24 24 20 20 18

6.00 6.00 6.00 7.00 8.00 9.00 12.00

4.90 4.90 4.90 5.50 6.20 7.00 9.00

4.10 5.50 6.90 8.50 9.90 11.50 14.50

50.00 56.00 63.00 63.00 70.00 70.00 70.00

bright

106

steam tempered

universal

general steel

AVAILABILITY

14.00 4.826 17.00 6.350 17.00 7.938 18.00 9.525 20.00 11.113 20.00 12.700 20.00 15.875

nitrided tool steel

• • • • • • •

P AlCrN

stainless steel

TiN

• • • • • • •

C TiCN

Aluminium

Carbo cast materials

HAND TAPS FOR BSW THREADS

THROUGH HOLE

BLIND HOLE

Guhring no.

954

957

Standard

DIN 352

Tool material

TAPS

(SERIES TAPS)

HSS

Surface Type

Description

Set of taps

Bottoming

Cutting direction

right-hand

Tolerance

FIRST AND SECOND TAP IS UNDERSIZE

Code

inch

no.

W3/16 W1/4 W5/16 W3/8 W1/2

24 20 18 16 12

6.00 6.00 6.00 7.00 9.00

4.90 4.90 4.90 5.50 7.00

3.60 5.10 6.50 7.90 10.50

50.00 56.00 63.00 70.00 75.00

bright

steam tempered

universal

general steel

AVAILABILITY

14.00 4.762 16.00 6.350 18.00 7.938 20.00 9.525 25.00 12.700

nitrided tool steel

• • • • •

• • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

107

DIES FOR METRIC THREADS TAPS

Guhring no.

151

Standard

DIN EN 22568

Tool material

HSS

Surface Spiral entry

without

Chamfer lead

1.75xP

Cutting direction

right-hand

Tolerance

Application Cutting speed m/min

6-10

workpiece Ø

M2 M3 M4 M5 M6 M8 M10 M12 M16 M18 M20 M24

0.40 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50 2.50 3.00

16.00 20.00 20.00 20.00 20.00 25.00 30.00 38.00 45.00 45.00 45.00 55.00

5.00 5.00 5.00 7.00 7.00 9.00 11.00 14.00 18.00 18.00 18.00 22.00

1.940 2.920 3.910 4.900 5.880 7.870 9.850 11.830 15.820 17.790 19.790 23.770

bright

108

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

Guhring no.

182

Standard

DIN EN 22568

Tool material

TAPS

DIES FOR UNC THREADS

HSS

Surface Spiral entry

right-hand

Chamfer lead

with

Cutting direction

1.75xP

Tolerance

Application Cutting speed m/min

6-10

workpiece Ø

Code

inch

no.

1/4 5/16 3/8 7/16 1/2 5/8 3/4

20 18 16 14 13 11 10

20.00 25.00 30.00 30.00 38.00 45.00 45.00

7.00 9.00 11.00 11.00 14.00 18.00 18.00

6.220 7.800 9.370 10.950 12.520 15.680 18.840

6.350 7.938 9.525 11.113 12.700 15.875 19.050

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

109

DIES FOR UNF THREADS TAPS

Guhring no.

185

Standard

DIN EN 22568

Tool material

HSS

Surface Spiral entry

with

Chamfer lead

1.75 x P

Cutting direction

right-hand

Tolerance

Application Cutting speed m/min

6-10

workpiece Ø

Code

inch

no.

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

28 24 24 20 20 18 18 16

20.00 25.00 30.00 30.00 38.00 38.00 45.00 45.00

7.00 9.00 11.00 11.00 10.00 10.00 14.00 14.00

6.240 7.820 9.410 10.980 12.560 14.140 15.730 18.890

6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050

bright

110

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • • • • • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

Guhring no.

172

Standard

DIN EN 22568

Tool material

TAPS

DIES FOR BSW THREADS

HSS

Surface Spiral entry

with

Chamfer lead

1.75xP

Cutting direction

right-hand

Tolerance Application Cutting speed m/min

6-10

workpiece Ø

Code

inch

no.

W 1/4 W 3/8 W 1/2

20.00 16.00 12.00

20.00 30.00 38.00

7.00 11.00 14.00

6.180 9.350 12.470

6.350 9.525 12.700

bright

steam tempered

universal

general steel

nitrided tool steel

AVAILABILITY • • •

P AlCrN

stainless steel

TiN

C TiCN

Aluminium

Carbo cast materials

111

MILLING CUTTERS

T-SLOT DOVE TAILFIRE

HELIX ANGLE RATIO END MILLS

CARBIDE

SIGNUM PVD COATING

112

ROUGHING

MINI SLOT DRILLS

SUPER FINISH

MILLING CUTTERS CORNER RADIUS TITANIIUM

STAINLESS STEEL

CAST IRON ALUMINIUM

HARDENED STEEL

FINISHING

ENGRAVING TOOLS

ROUGHING

CORNER ROUNDING CUTTERS

END MILLS

CHAMFERING MILLING CUTTER

Guhring no. Standard

3451

3453

DIN 327 D

DIN 844 L

Tool material

M 42

Surface Type Length Helix angle

standard

long

30º

e8/h10

h10

Tolerance

MILLING CUTTERS

SLOT DRILLS (2-FLUTED)

l2 l1

1.000 1.500 2.000 2.500 3.000 3.500 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 14.000 15.000 16.000 18.000 20.000 25.000

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 20.000 25.000

47.00 47.00 48.00 49.00 49.00 50.00 51.00 52.00 52.00 60.00 61.00 61.00 63.00 70.00 73.00 73.00 73.00 79.00 79.00 88.00 102.00

2.00 3.00 4.00 5.00 5.00 6.00 7.00 8.00 8.00 10.00 11.00 11.00 13.00 13.00 16.00 16.00 16.00 19.00 19.00 22.00 26.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

3.00 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00

6.000 6.000 6.000 6.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000

56.00 63.00 68.00 68.00 88.00 95.00 110.00 110.00 123.00 123.00 141.00

12.00 19.00 24.00 24.00 38.00 45.00 53.00 53.00 63.00 63.00 75.00

2 2 2 2 2 2 2 2 2 2 2

AVAILABILITY • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

113

SLOT DRILLS (3-FLUTED) MILLING CUTTERS

Guhring no. Standard

3459

3460

DIN 844 K

DIN 844 L

Tool material

M 42

Surface Type Length Helix angle

standard

long

30º

e8/h10

h10

Tolerance

l2 l1

3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 6.000 6.000 6.000 10.000 10.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000

52.00 55.00 57.00 57.00 66.00 69.00 69.00 72.00 83.00 83.00 92.00 92.00 104.00

8.00 11.00 13.00 13.00 16.00 19.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00

3 3 3 3 3 3 3 3 3 3 3 3 3

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 6.000 6.000 6.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000

56.00 63.00 68.00 68.00 88.00 95.00 110.00 110.00 123.00 123.00 141.00

12.00 19.00 24.00 24.00 38.00 45.00 53.00 53.00 63.00 63.00 75.00

3 3 3 3 3 3 3 3 3 3 3

AVAILABILITY • • • • • • • • • • • • •

• • • • • • • • • • •

• Australian stock item

114

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard

3428

3431

3433

DIN 844 K

DIN 844 L

Guhring std.

Tool material

M 42

Surface Type Length

long

extra long

30º

Tolerance

k10

standard

Helix angle

MILLING CUTTERS

END MILLS (4-FLUTED)

l2 l1

2.000 2.500 3.000 4.000 5.000 6.000 7.000 8.000 10.000 11.000 12.000 13.000 14.000 16.000 18.000 20.000 25.000 30.000 32.000

6.000 6.000 6.000 6.000 6.000 6.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 20.000 25.000 25.000 32.000

51.00 52.00 52.00 55.00 57.00 57.00 66.00 69.00 72.00 79.00 83.00 83.00 83.00 92.00 92.00 104.00 121.00 121.00 133.00

7.00 8.00 8.00 11.00 13.00 13.00 16.00 19.00 22.00 22.00 26.00 26.00 26.00 32.00 32.00 38.00 45.00 45.00 53.00

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6

3.000 4.000 5.000 6.000 8.000 9.000 10.000 12.000 14.000 16.000 18.000 20.000 25.000 30.000 40.000

6.000 6.000 6.000 6.000 10.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000 25.000 25.000 40.000

56.00 63.00 68.00 68.00 88.00 88.00 95.00 110.00 110.00 123.00 123.00 141.00 166.00 166.00 217.00

12.00 19.00 24.00 24.00 38.00 38.00 45.00 53.00 53.00 63.00 63.00 75.00 90.00 90.00 125.00

4 4 4 4 4 4 4 4 4 4 4 4 6 6 6

6.000 8.000 10.000 12.000

6.000 10.000 10.000 12.000

79.00 105.00 112.00 125.00

40.00 56.00 63.00 71.00

4 4 4 4

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

115

T-SLOT END MILLS MILLING CUTTERS

Guhring no.

3570

Standard

DIN 851

Tool material

HSCO

Surface N 10º

Tolerance

d11

Type Helix angle

Code

for

no.

keyseats

12.500 16.000 18.000 19.000 21.000 22.000 25.000 28.000 32.000

6 8 10 10 12 12 14 16 18

12.500 16.000 18.000 19.000 21.000 22.000 25.000 28.000 32.000

10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 16.000

57.00 62.00 70.00 71.00 74.00 75.00 82.00 85.00 90.00

6.00 8.00 8.00 9.00 9.00 10.00 11.00 12.00 14.00

AVAILABILITY

6 6 6 6 8 8 8 8 8

• • • • • • • • •

• Australian stock item

116

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

3572

3574

Standard

DIN 1833

Tool material

HSCO

Surface Type

45º

60º

Tolerance

js16

Profile angle

Code

no.

16.000 20.000 25.000 32.000

12.00 12.00 12.00 16.00

60.00 63.00 67.00 71.00

4.00 5.00 6.30 8.00

8 10 10 12

16.000 20.000 25.000 32.000

12.00 12.00 12.00 16.00

60.00 63.00 67.00 71.00

6.30 8.00 10.00 12.50

8 10 10 12

AVAILABILITY • • • •

• • • •

• Australian stock item

bright

MILLING CUTTERS

DOVETAIL CUTTERS

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

117

CORNER ROUNDING CUTTERS MILLING CUTTERS

Guhring no.

3176

Standard

DIN 6518

Tool material

M42

Surface Type

Helix angle

5º

d3 d1

Tolerance

Code

no.

2.000 2.500 3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 16.00 20.00

10.000 11.000 12.000 14.000 16.000 20.000 24.000 28.000 34.000 48.000 56.000

10.000 6.000 10.000 6.000 12.000 6.000 12.000 6.000 12.000 6.000 16.000 8.000 16.000 8.000 25.000 8.000 25.000 10.000 25.000 16.000 32.000 16.000

60.00 60.00 60.00 60.00 60.00 67.00 71.00 85.00 90.00 100.00 112.00

AVAILABILITY

4 4 4 4 4 4 4 4 4 6 6

• • • • • • • • • • •

• Australian stock item

118

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard

3676

5549

DIN 6528

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

long

Helix angle

30º

Tolerance

h10

MILLING CUTTERS

SLOT DRILLS (2-FLUTED)

c l2 l3 l1

mm x 45º

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

38.00 50.00 50.00 57.00 63.00 72.00 83.00 92.00 104.00

7.00 8.00 10.00 10.00 16.00 19.00 22.00 26.00 32.00

11.00 22.00 22.00 21.00 27.00 32.00 38.00 44.00 54.00

0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.15 0.15

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00 65.00 65.00

47.00 47.00 47.00 39.00 64.00 60.00 105.00 102.00 100.00

0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.15 0.15

AVAILABILITY • • • • • • • • •

• • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

119

SLOT DRILLS FOR ALUMINIUM (2-FLUTED) MILLING CUTTERS

Guhring no. Standard

5743

3358

DIN 6527 L

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

long

Helix angle

45º

Tolerance

h10

c l2 l3 l1

mm x 45º

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 20.000

6.000 6.000 6.000 6.000 8.000 10.000 12.000 14.000 16.000 20.000

57.00 57.00 57.00 57.00 63.00 72.00 83.00 83.00 92.00 104.00

7.00 8.00 10.00 10.00 16.00 19.00 22.00 22.00 26.00 32.00

10.90 11.90 15.40 21.00 27.00 32.00 38.00 38.00 44.00 54.00

0.03 0.03 0.03 0.03 0.05 0.05 0.10 0.10 0.10 0.10

5.00 6.00 8.00 10.00 12.00 16.00

5.000 6.000 8.000 10.000 12.000 16.000

75.00 75.00 100.00 100.00 150.00 150.00

30.00 30.00 40.00 40.00 45.00 65.00

47.00 39.00 64.00 60.00 105.00 102.00

0.03 0.03 0.05 0.05 0.10 0.10

AVAILABILITY • • • • • • • • •

• • • • • •

• Australian stock item

120

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

3472

3473

Standard

Guhring std.

Tool material

Solid carbide

Surface Type

Length Helix angle Tolerance

MILLING CUTTERS

RATIO END MILLS FOR ALUMINIUM (3-FLUTED)

standard

long

39º / 40º / 41º

h10

RF 100 A

c l2 l3

mm x 45º

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

6.000 6.000 6.000 6.000 8.000 10.000 12.000 16.000 20.000

2.800 3.800 4.800 5.700 7.700 9.500 11.500 15.500 19.500

57.00 57.00 57.00 57.00 63.00 72.00 83.00 92.00 104.00

8.00 11.00 13.00 13.00 19.00 22.00 26.00 32.00 38.00

15.00 18.00 18.00 21.00 27.00 32.00 38.00 44.00 54.00

0.03 0.04 0.05 0.06 0.08 0.10 0.12 0.16 0.20

6.000 6.000 5.700 8.000 8.000 7.700 10.000 10.000 9.500 12.000 12.000 11.500 16.000 16.000 15.500 20.000 20.000 19.500

65.00 80.00 80.00 93.00 108.00 126.00

13.00 19.00 22.00 26.00 32.00 38.00

29.00 39.00 40.00 48.00 60.00 76.00

0.06 0.08 0.10 0.12 0.16 0.20

AVAILABILITY • • • • • • • • •

• • • • • •

*Also available with corner radius on request

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

121

MINI SLOT DRILLS (3-FLUTED) MILLING CUTTERS

Guhring no.

5573

5574

Standard

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

Helix angle

30º

45º

Tolerance

c l2 l3 l1

mm x 45º

0.500 0.600 0.800

3.000 3.000 3.000

38.00 38.00 38.00

1.50 1.50 2.00

3.40 3.40 3.90

0.03 0.03 0.03

1.000 1.200 1.500 1.800 2.000 2.500 3.000 3.500 4.500 5.000 5.500 6.000 6.750 7.000 7.750 8.000 8.700 9.000 9.700 10.000

3.000 3.000 3.000 3.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000

38.00 38.00 38.00 38.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00

2.00 2.00 3.00 3.00 4.00 5.00 6.00 6.00 8.00 8.00 8.00 10.00 10.00 12.00 12.00 13.00 14.00 14.00 16.00 16.00

3.90 3.90 5.90 5.90 6.90 7.90 9.90 9.90 13.40 13.40 14.40 15.00 18.40 12.00 12.00 19.00 23.40 23.40 16.30 25.00

0.03 0.03 0.03 0.03 0.03 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10

AVAILABILITY • • •

• • • • • • • • • • • m m

• m

• m m

• Australian stock item

122

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard

5506

3680

3173

DIN 6527 L

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

long

standard

Helix angle

45º

30º

45º

Tolerance

h10

MILLING CUTTERS

SLOT DRILLS (3-FLUTED)

c l2 l3 l1

mm x 45º

3.000 3.500 4.000 5.000 6.000 7.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 6.000 6.000 6.000 6.000 8.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

57.00 57.00 57.00 57.00 57.00 63.00 63.00 72.00 83.00 83.00 92.00 92.00 104.00

7.00 7.00 8.00 10.00 10.00 13.00 16.00 19.00 22.00 22.00 26.00 26.00 32.00

10.90 10.90 11.90 15.40 21.00 21.40 27.00 32.00 38.00 38.00 44.00 44.00 54.00

0.03 0.05 0.06 0.08 0.09 0.11 0.12 0.15 0.18 0.21 0.19 0.22 0.24

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00 65.00 65.00

47.00 47.00 47.00 39.00 64.00 60.00 105.00 102.00 100.00

0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.15 0.15

Code

inch

no.

1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1

1 1/2 2 2 1/2 2 1/2 3 2 3/4 3 3 1/2 4 4

3/8 5/8 3/4 13/16 1 2 3/4 1 1 1/4 1 1/2 1 1/2

3.170 4.760 6.350 7.940 9.520 11.110 12.700 15.870 19.050 25.400

AVAILABILITY • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

123

END MILLS (4-FLUTED) MILLING CUTTERS

Guhring no. Standard

3649

5556

DIN 6527

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

long

Helix angle

30º

Tolerance

h10

c l2 l3 l1

mm x 45º

2.000 3.000 3.500 4.000 4.500 5.000 6.000 7.000 8.000 9.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 10.000 10.000 12.000 14.000 16.000 18.000 20.000

57.00 57.00 57.00 57.00 57.00 57.00 57.00 63.00 63.00 72.00 72.00 83.00 83.00 92.00 92.00 104.00

7.00 8.00 10.00 11.00 11.00 13.00 13.00 16.00 19.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00

11.40 12.90 15.90 16.90 16.90 19.90 21.00 23.90 27.00 28.40 32.00 38.00 38.00 44.00 44.00 54.00

0.03 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00 150.00 150.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00 45.00 65.00 65.00 65.00

47.00 47.00 47.00 39.00 64.00 60.00 105.00 105.00 102.00 102.00 100.00

0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.15 0.15 0.15 0.15

AVAILABILITY m

• m

• • m

• m

• • m

• m

•

• • • • • • • • • • •

• Australian stock item

124

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

END MILLS WITH CORNER RADIUS (4-FLUTED) Guhring no.

MILLING CUTTERS

3562

Standard

DIN 6527 L

Tool material

Solid carbide

Surface Type

Length

standard

Helix angle

30º

Tolerance

h10

r l2 l3

Code

no.

6.000 6.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 12.000 12.000 16.000 16.000 16.000 20.000 20.000 20.000

5.700 5.700 7.700 7.700 7.700 7.700 9.500 9.500 9.500 9.500 9.500 9.500 11.500 11.500 11.500 11.500 11.500 11.500 15.500 15.500 15.500 19.500 19.500 19.500

57.00 57.00 63.00 63.00 63.00 63.00 72.00 72.00 72.00 72.00 72.00 72.00 83.00 83.00 83.00 83.00 83.00 83.00 92.00 92.00 92.00 104.00 104.00 104.00

13.00 13.00 19.00 19.00 19.00 19.00 22.00 22.00 22.00 22.00 22.00 22.00 26.00 26.00 26.00 26.00 26.00 26.00 32.00 32.00 32.00 38.00 38.00 38.00

20.00 20.00 26.00 26.00 26.00 26.00 32.00 32.00 32.00 32.00 32.00 32.00 38.00 38.00 38.00 38.00 38.00 38.00 42.00 42.00 42.00 52.00 52.00 52.00

0.50 1.00 0.50 1.00 1.50 2.00 0.50 0.80 1.00 1.50 2.00 3.00 0.50 0.80 1.00 1.50 2.00 3.00 1.00 1.50 2.00 1.00 1.50 2.00

6.005 6.010 8.005 8.010 8.015 8.020 10.005 10.008 10.010 10.015 10.020 10.030 12.005 12.008 12.010 12.015 12.020 12.030 16.010 16.015 16.020 20.010 20.015 20.020

AVAILABILITY • • • • • • m m

• m

• • m m

• m

• • • • • m m m

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

125

RATIO END MILLS FOR STEEL, CAST IRON AND HARDENED STEEL MILLING CUTTERS

Guhring no. Standard

3892

5735

5535

5582

3114

Guhring std.

DIN 6527 L

Guhring std.

Tool material

Solid carbide

Surface Type Length Helix angle

standard

long

standard

41º / 43º / 45º

35º / 38º

Tolerance

h10

RF 100 U

c l2 l3

mm x 45º

13.00 19.00 22.00 26.00 32.00 38.00

20.00 26.00 30.00 36.00 42.00 52.00

0.09 0.12 0.15 0.18 0.19 0.24

3 3 3 3 3 3

6.000 8.000 10.000 12.000 16.000 20.000

6.000 5.70 57.00 8.000 7.70 63.00 10.000 9.50 72.00 12.000 11.50 83.00 16.000 15.50 92.00 20.000 19.50 104.00

4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000 25.000

6.000 6.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000 25.000

3.80 57.00 11.00 4.80 57.00 13.00 5.70 57.00 13.00 7.70 63.00 19.00 9.50 72.00 22.00 11.50 83.00 26.00 13.50 83.00 26.00 15.50 92.00 32.00 17.50 92.00 32.00 19.50 104.00 38.00 24.00 121.00 45.00

18.00 18.00 20.00 26.00 30.00 36.00 36.00 42.00 42.00 52.00 63.00

0.10 0.10 0.15 0.15 0.20 0.20 0.25 0.35 0.40 0.45 0.60

4 4 4 4 4 4 4 4 4 4 4

10.000 12.000 16.000 20.000 25.000

9.500 11.500 15.500 19.500 24.000

48.00 58.00 78.00 78.00 92.00

0.20 0.20 0.35 0.45 0.60

4 4 4 4 4

100.00 150.00 150.00 150.00 150.00

40.00 45.00 65.00 65.00 75.00

Code

inch 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1

inch 2 2 1/2 2 1/2 2 1/2 2 3/4 3 3 1/2 4 4

inch 3/8 3/4 13/16 1 1 1 1 1/4 1 1/2 1 1/2

4 4 4 4 4 4 4 4 4

no. 4.760 6.350 7.940 9.520 11.110 12.700 15.870 19.050 25.400

AVAILABILITY • • • • • • • • • • • • • • • • •

bright

steam tempered

nitrided lands

• • • • • • •

• • • • • • • • • • Australian stock item

126

• • • • • • • •

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard

3803

6736

DIN 6527 L

DIN 6527

Tool material

Solid carbide

Surface

Signum

Type Length Helix angle Tolerance

standard

36º/38º

36º/38º/37º

h10

RF 100 VA

RF 100 DIVER

MILLING CUTTERS

RATIO END MILLS FOR STAINLESS STEEL (4-FLUTED)

c l2 l3

mm x 45º

3.000 6.000 8.000 10.000 12.000 16.000 20.000

6.000 6.000 8.000 10.000 12.000 16.000 20.000

2.800 5.700 7.700 9.500 11.500 15.500 19.500

57.00 57.00 63.00 72.00 83.00 92.00 104.00

8.00 13.00 19.00 22.00 26.00 32.00 38.00

15.00 20.00 26.00 30.00 36.00 42.00 52.00

0.10 0.20 0.25 0.30 0.35 0.50 0.60

4.000 5.000 5.700 6.000 7.700 8.000 9.700 10.000 11.700 12.000 13.700 14.000 15.600 16.000 19.500 20.000

6.000 6.000 6.000 6.000 8.000 8.000 10.000 10.000 12.000 12.000 14.000 14.000 16.000 16.000 20.000 20.000

3.800 57.00 4.800 57.00 5.500 57.00 5.700 57.00 7.400 63.00 7.700 63.00 9.400 72.00 9.500 72.00 11.200 83.00 11.500 83.00 13.200 83.00 13.500 83.00 15.100 92.00 15.500 92.00 19.000 104.00 19.500 104.00

11.00 13.00 13.00 13.00 19.00 19.00 22.00 22.00 26.00 26.00 26.00 26.00 32.00 32.00 38.00 38.00

18.00 18.00 19.60 20.00 25.50 26.00 30.50 30.00 35.30 36.00 35.30 36.00 41.20 42.00 51.10 52.00

0.04 0.05 0.06 0.06 0.08 0.08 0.10 0.10 0.12 0.12 0.14 0.14 0.16 0.16 0.20 0.20

AVAILABILITY • • • • • • •

• • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

127

RATIO END MILLS FOR TITANIUM (4-FLUTED) MILLING CUTTERS

Guhring no.

3499

Standard

DIN 6527

Tool material

Solid carbide

Surface Type

Length

standard

Helix angle

35º/38º

Tolerance

h10 RF 100 Ti

r l2 l3

Code

no.

6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 20.000 20.000 20.000 20.000 20.000 20.000

5.700 5.700 5.700 5.700 5.700 7.700 7.700 7.700 7.700 7.700 9.500 9.500 9.500 9.500 9.500 11.500 11.500 11.500 11.500 11.500 11.500 11.500 11.500 11.500 15.500 15.500 15.500 15.500 15.500 15.500 15.500 15.500 15.500 19.500 19.500 19.500 19.500 19.500 19.500

57.00 57.00 57.00 57.00 57.00 63.00 63.00 63.00 63.00 63.00 72.00 72.00 72.00 72.00 72.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 92.00 92.00 92.00 92.00 92.00 92.00 92.00 92.00 92.00 104.00 104.00 104.00 104.00 104.00 104.00

13.00 13.00 13.00 13.00 13.00 19.00 19.00 19.00 19.00 19.00 22.00 22.00 22.00 22.00 22.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 38.00 38.00 38.00 38.00 38.00 38.00

AVAILABILITY

20.00 0.50 6.005 20.00 0.80 6.008 20.00 1.00 6.010 20.00 1.50 6.015 20.00 2.00 6.020 26.00 0.50 8.005 26.00 0.80 8.008 26.00 1.00 8.010 26.00 1.50 8.015 26.00 2.00 8.020 30.00 0.50 10.005 30.00 0.80 10.008 30.00 1.00 10.010 30.00 1.50 10.015 30.00 2.00 10.020 36.00 0.50 12.005 36.00 0.80 12.008 36.00 1.00 12.010 36.00 1.50 12.015 36.00 2.00 12.020 36.00 2.50 12.025 36.00 3.00 12.030 36.00 3.175 12.031 36.00 4.00 12.040 42.00 0.50 16.005 42.00 0.80 16.008 42.00 1.00 16.010 42.00 1.50 16.015 42.00 2.00 16.020 42.00 2.50 16.025 42.00 3.00 16.030 42.00 3.175 16.031 42.00 4.00 16.040 52.00 0.50 20.005 52.00 1.00 20.010 52.00 1.50 20.015 52.00 2.00 20.020 52.00 2.50 20.025 52.00 3.00 20.030

m m

• m m m m

• m

• m m

• m

• m m

• m

• m m m m

• m

• m m m

• m

• • Australian stock item

128

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

RATIO END MILLS FOR TITANIUM (4-FLUTED) Guhring no.

MILLING CUTTERS

3499

Standard

DIN 6527

Tool material

Solid carbide

Surface Type

Length

standard

Helix angle

35º/38º

Tolerance

h10 RF 100 Ti

r l2 l3

Code

no.

20.000 20.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000

19.500 19.500 24.000 24.000 24.000 24.000 24.000 24.000 24.000

104.00 104.00 121.00 121.00 121.00 121.00 121.00 121.00 121.00

38.00 38.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00

52.00 52.00 63.00 63.00 63.00 63.00 63.00 63.00 63.00

3.175 4.00 1.50 2.00 2.50 3.00 3.175 4.00 5.00

20.031 20.040 25.015 25.020 25.025 25.030 25.031 25.040 25.050

AVAILABILITY m m m

• m

• • • m

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

129

RATIO END MILLS RMR (4-FLUTED) MILLING CUTTERS

Guhring no.

3508

Standard

Guhring std.

Tool material

Solid carbide

Surface Type

Length

standard

Helix angle

30º/32º

Tolerance

h10 RF 100 U

RMR

l2 l3 l1

mm x 45º

13.00 19.00 22.00 26.00 32.00 38.00 45.00

20.00 26.00 30.00 36.00 42.00 52.00 63.00

0.30 0.30 0.30 0.50 0.50 0.50 0.60

6.000 6.000 5.700 57.00 8.000 8.000 7.700 63.00 10.000 10.000 9.500 72.00 12.000 12.000 11.500 83.00 16.000 16.000 15.500 92.00 20.000 20.000 19.500 104.00 25.000 25.000 24.000 121.00

AVAILABILITY • • • • • • •

• Australian stock item

130

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no.

6709

3897

Standard

Guhring std.

Tool material

Solid carbide

Surface Type Length Helix angle Tolerance

standard

3xd

45º

h10

RF 100 SF

MILLING CUTTERS

RATIO END MILLS SUPERFINISH (5-FLUTED)

c l2 l3

mm x 45º

4.000 6.000 3.800 57.00 5.000 6.000 4.800 57.00 6.000 6.000 5.700 57.00 8.000 8.000 7.700 63.00 10.000 10.000 9.500 72.00 12.000 12.000 11.500 83.00 16.000 16.000 15.500 92.00 20.000 20.000 19.500 104.00 25.000 25.000 24.000 121.00

11.00 13.00 13.00 19.00 22.00 26.00 32.00 38.00 45.00

18.00 18.00 20.00 26.00 30.00 36.00 42.00 52.00 63.00

0.05 0.05 0.05 0.10 0.10 0.10 0.15 0.15 0.20

4.000 6.000 3.800 5.000 6.000 4.800 6.000 6.000 5.700 8.000 8.000 7.700 10.000 10.000 9.500 12.000 12.000 11.500 16.000 16.000 15.500 20.000 20.000 19.500

12.00 15.00 18.00 24.00 30.00 36.00 48.00 60.00

26.00 26.00 28.00 38.00 38.00 46.00 58.00 74.00

0.05 0.05 0.05 0.10 0.10 0.10 0.15 0.15

65.00 65.00 65.00 75.00 80.00 93.00 108.00 126.00

AVAILABILITY • • • • • • • • •

• • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

131

BALL NOSE SLOT DRILLS (2-FLUTED) MILLING CUTTERS

Guhring no.

3466

Standard

DIN 327 D

Tool material

M 42

Surface Type

Length

short

Helix angle

30º e8/h10

Tolerance

l2 l1

tolerance

2.000 3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000 22.000 24.000 25.000 26.000 28.000 30.000

e8 e8 e8 e8 e8 e8 e8 h10 e8 h10 e8 h10 e8 h10 e8 h10 e8 h10 e8 e8 e8 e8 h10 e8 h10

6.000 6.000 6.000 6.000 6.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 12.000 16.000 16.000 16.000 16.000 20.000 20.000 25.000 25.000 25.000 25.000 25.000

48.00 49.00 51.00 52.00 52.00 60.00 61.00 61.00 63.00 70.00 73.00 73.00 73.00 73.00 79.00 79.00 79.00 79.00 88.00 88.00 102.00 102.00 102.00 102.00 102.00

4.00 5.00 7.00 8.00 8.00 10.00 11.00 11.00 13.00 13.00 16.00 16.00 16.00 16.00 19.00 19.00 19.00 19.00 22.00 22.00 26.00 26.00 26.00 26.00 26.00

AVAILABILITY m m

• m

• m m m

• m m m m m m

• Australian stock item

132

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard

3308

3679

DIN 6527

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

Helix angle

30º

Tolerance

h10

MILLING CUTTERS

BALL NOSE SLOT DRILLS (2-FLUTED)

r l2 l3 l1

0.500 0.800 1.000 1.500 2.000 3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

3.000 3.000 3.000 3.000 6.000 6.000 6.000 6.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

38.00 38.00 38.00 38.00 57.00 57.00 57.00 57.00 57.00 63.00 72.00 83.00 83.00 92.00 92.00 104.00

1.00 1.00 2.00 3.00 6.00 7.00 8.00 10.00 10.00 16.00 19.00 22.00 22.00 26.00 26.00 32.00

2.10 2.10 3.90 6.40 9.40 11.90 13.40 16.90 21.00 27.00 32.00 38.00 38.00 44.00 44.00 54.00

0.25 0.40 0.50 0.75 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00

AVAILABILITY • • • • • • • • • • • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

• • • • • • • • • • • • • • • •

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

133

BALL NOSE HARD PROFILE <62 HRC CUTTERS (2-FLUTED) MILLING CUTTERS

Guhring no.

3359

3360

Standard

Guhring std.

Tool material

Solid carbide

Surface

Signum

Type

Length

standard

long

Helix angle

30º

Tolerance

r l2 l3 l4

0.500 0.800 1.000 1.500 2.000 3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000

3.000 3.000 3.000 3.000 6.000 6.000 6.000 6.000 6.000 8.000 10.000 12.000 16.000

0.400 0.700 0.900 1.400 1.900 2.700 3.700 4.700 5.700 7.700 9.500 11.500 15.500

38.00 38.00 38.00 38.00 57.00 57.00 57.00 57.00 57.00 63.00 72.00 83.00 92.00

0.75 1.20 1.50 2.25 3.00 5.00 6.00 8.00 9.00 12.00 15.00 18.00 24.00

2.60 3.50 4.00 5.50 9.40 11.60 14.50 17.30 20.00 26.00 30.00 36.00 42.00

10.00 10.00 10.00 10.00 21.00 21.00 21.00 21.00 21.00 27.00 32.00 38.00 44.00

0.25 0.40 0.50 0.75 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000

6.000 6.000 6.000 6.000 8.000 10.000 12.000 16.000

2.700 3.700 4.700 5.700 7.700 9.500 11.500 15.500

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00

5.00 20.00 39.00 6.00 20.00 39.00 8.00 20.00 39.00 9.00 38.00 39.00 12.00 63.00 64.00 15.00 58.00 60.00 18.00 103.00 105.00 24.00 100.00 102.00

1.50 2.00 2.50 3.00 4.00 5.00 6.00 8.00

AVAILABILITY • • • • • • • • • • • • •

• • • • • • • •

• Australian stock item

134

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

Guhring no. Standard

3050

3727

3043

DIN 6527

DIN 6528

Guhring std.

Tool material

Solid carbide

Surface Type Length

standard

extra long

Helix angle

30º

Tolerance

h10

MILLING CUTTERS

BALL NOSE END MILLS (4-FLUTED)

r l2 l3 l1

3.000

6.000

57.00

8.00

12.90

1.50

4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

50.00 50.00 57.00 63.00 72.00 83.00 83.00 92.00 92.00 104.00

11.00 13.00 13.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00

22.00 22.00 21.00 27.00 32.00 38.00 38.00 44.00 44.00 54.00

2.00 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00

3.000 4.000 5.000 6.000 8.000 10.000 12.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00

47.00 47.00 47.00 39.00 64.00 60.00 105.00

1.50 2.00 2.50 3.00 4.00 5.00 6.00

AVAILABILITY •

• • • • • • • • • •

• • • • • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

135

CHAMFERING MILLING CUTTERS (4-FLUTED) MILLING CUTTERS

Guhring no.

6711

6713

Standard

Guhring std.

Tool material

Solid carbide

6714

Surface Type

standard

Angle

60º

90º

120º

Tolerance

js9

h10

Length

l2 l1

4.000 6.000 8.000 10.000 12.000

50.00 57.00 63.00 72.00 83.00

3.50 5.20 7.00 8.70 10.40

4 4 4 4 4

4.000 6.000 8.000 10.000 12.000

50.00 57.00 63.00 72.00 83.00

2.00 3.00 4.00 5.00 6.00

4 4 4 4 4

4.000 6.000 8.000 10.000 12.000

50.00 57.00 63.00 72.00 83.00

1.20 1.80 2.40 2.90 3.50

4 4 4 4 4

AVAILABILITY • • • • • • • • • • • • • • •

• Australian stock item

136

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

ENGRAVING TOOL (2-FLUTED) Guhring no.

Guhring std.

Tool material

Solid carbide

MILLING CUTTERS

5006

Standard Surface Type

Length

standard 30º

Tolerance

30°

Angle

l2 l1

3.000

38.00

0.70

0.30

AVAILABILITY •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

137

HPC AND HSC - MILLING STRATEGIES WITH SOLID CARBIDE MILLING CUTTERS MILLING CUTTERS

Objectives: Higher efficiency through greater metal removal rate HPC = High Performance Cutting: max. machining volume / time; stable conditions; short chip creation; high performance; good cooling

HSC = High Speed Cutting: at higher cutting speed/ high feed; low power; low feed function

Milling with a tool contact angle of less than 70º and cutting depths of 2-3 x tool diameter

Milling with a tool contact angle of less than 37° and cutting depths up to 3x tool diameter

Semi roughing, finishing and fine-finishing

, roughing, trochoid

• low cutting width (ae): <0.4 x d • high depth of cut (ap): up to 2-3 x d • very high tooth feed rate (fz) • very high cutting speed (vc)

• minimum cutting width (ae): 0.15 x d • high depth of cut (ap): up to 3 x d • high tooth feed rate (fz) • maximum cutting speed (vc)

Tool Contact Angle

HPC Linear Milling

HPC Milling – Trochoid /

Milling internal and external contours with high axial depth (ap) and low radial widths (ae). Increasing the cutting parameters due to the tool contact angle.

Machining of grooves or complex contours with long lengths (ap) and small radial depths (ae). Increasing the cutting parameters due to the limited angle of contact. Programming cycles or CAM-program.

Operating Principals • reducing the contact time of tool and workpiece results in less stress and greater thermal efficiency on the cutting edge • the reduction of the pressure angle between the tool and workpiece reduces the average chip thickness • less force on the tool, workpiece and machine

138

Tool Contact Angle

Benefits • extreme increase in cutting speed • significant increase in the feed rate per tooth • significant increase in the removal rate • process-reliable for difficult-to-machine materials • increase in tool life • machinery is conserved

HPC AND HSC - MILLING STRATEGIES Benchmarks for increasing the cutting values Application

Radial feed in% from

* fz Factor

* vc Factor

Contact Angle

slotting

100%

180°

HPC roughing

33%

1,3

1,5

70°

HPC roughing

25%

1,5

1,6

60°

HPC roughing

20%

1,6

1,7

53°

HPC roughing

15%

1,9

1,7

46°

HSC roughing

10%

2,3

1,8

37°

HSC roughing

3,3

1,9

26°

HSC finishing

1,1

2,0

20°

HSC finishing

1,4

2,0

18°

HSC finishing

2,0

2,1

11°

Fine finishing

<1%

target: min Rz

MILLING CUTTERS

WITH SOLID CARBIDE MILLING CUTTERS

* Basis for the calculation with the vc and fz factors is provided within the Guhring Navigator section for „grooves“ in the appropriate material group.

Example: steel C45 Tools:

Milling cutter Ø12 mm

Feed:

Radial feed (ae) 3 mm

% Calculation : ae 3 mm = 25% of Ø 12 mm Standard values: vc slotting = 180 m/min, fz slotting = 0.07 mm Conversion: vc factor = 1.6 g vc: 180 m/min x 1,6 = vc 288 m/min fz factor = 1.5 g fz: 0.07 mm x 1.5 = fz 0.105 Increased Values: vc 288 m/min / fz 0.105 mm S: 7640 min-1 / vf: 4580 mm/min ap: 24 mm ae: 3 mm g Q: 330 cm³/min

Q(cm3/min) = ap (mm) x ae (mm) x vf (m/min) The increase in the corner contact angle overloads the milling cutters. Solution: the pocket radius must be much larger than the milling cutter radius to keep the contact angle less than 80º (max load).

ae 20% D

80°

ae 40% D

140°

ae 90% D

ae 20% D

139

CUTTING SPEED RECOMMENDATION (HSCO UNIVERSAL MILLING CUTTERS) MILLING CUTTERS

Guhring no. 3451, 3453, 3459, 3460, 3428, 3431, 3433

HSCO

Application

vc factor

fz factor

Feed width (ae)

Slotting

1 (0.7 for ap = 2xd)

1xd

0.5 up to 1xd

Roughing

1 (0.7 for ap = 2xd)

0.4 up to 0.9xd

0.5 up to 1xd

Finishing

0.01 up to 0.1xd

1 up to 2xd

HPC-roughing

1.3

1.5

0.15 up to 0.4xd

1 up to 2xd

HSC-roughing

1.5

0.05 up to 0.15xd

1 up to 2xd

Material Structural + free-cutting steels, unalloyed heat-treatable + case hardened steels S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate, E295, E360, P500NH

Free-cutting steels, unalloyed case hardened steels, nitriding steels 11SMnPb30, 11SMn37, 1020, S1214, S1213, S12L13, S12L14, 46S20, 46SPb20

Alloyed heat-treatable, tool and high speed steels 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26, 36NiCr6, 41Cr4, 42CrMo4 Spring steel = 55Si7, 55Cr3, 51CrV4 Hardened steel Tool steel, heat-treatable steel, spring steel, high-speed steel, case hardened steel, etc. 10CrMo11, 11MnSi6, 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, 15NiCr13, 16MnCr5, 20CrMo5, N33, EN36A Stainless steel X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630

Hardness

up to 850 N/mm2

850-1,200 N/mm2

850- 1,400 N/mm2

fz(mm/z) with nom. ø

Type of application

cut Vc

Slotting

0.010 0.012 0.025 0.032 0.040 0.045 0.060 0.080

Roughing

0.012 0.015 0.030 0.039 0.050 0.060 0.080 0.095

Finishing

0.011 0.014 0.028 0.030 0.042 0.050 0.070 0.075

Slotting

0.009 0.012 0.020 0.030 0.035 0.040 0.045 0.060

Roughing

0.011 0.015 0.025 0.035 0.045 0.050 0.060 0.080

Finishing

0.010 0.014 0.021 0.028 0.039 0.042 0.050 0.070

Slotting

0.008 0.010 0.015 0.025 0.032 0.040 0.045 0.060

Roughing

0.010 0.012 0.020 0.030 0.039 0.050 0.060 0.080

Finishing

0.009 0.011 0.015 0.028 0.030 0.042 0.050 0.070

Slotting

up to 54 HRC

Roughing

54-60 HRC

Roughing

up to 750 N/mm2

Slotting

0.008 0.009 0.018 0.024 0.030 0.036 0.042 0.054

Roughing

0.010 0.011 0.021 0.027 0.036 0.042 0.054 0.060

Finishing Slotting Finishing

Finishing

0.009 0.010 0.018 0.024 0.033 0.039 0.048 0.057

Slotting

0.007 0.009 0.015 0.021 0.027 0.030 0.039 0.048

Stainless steel X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 304, 310, 316, 316Ti, 321

750-850 N/mm2

Roughing

0.009 0.010 0.018 0.024 0.033 0.039 0.048 0.057

Finishing

0.008 0.009 0.018 0.024 0.030 0.036 0.042 0.054

Stainless steel X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, 420C, 431, 440C

above 850 N/mm2

Slotting

0.006 0.007 0.015 0.018 0.024 0.027 0.036 0.042

Roughing

0.008 0.009 0.015 0.021 0.027 0.030 0.039 0.048

Finishing

0.007 0.009 0.015 0.021 0.027 0.030 0.039 0.048

Slotting

0.006 0.009 0.012 0.015 0.018 0.024 0.030 0.036

Special alloys (nickel based “Ni”) Nimonic, Inconel, Monel, Hastelloy Titanium alloys (“Ti”) Ti99,5, TiAl5Sn2,5, TiCu2, TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2

up to 1,300 N/ mm2

Roughing

0.006 0.012 0.018 0.021 0.024 0.033 0.039 0.048

Finishing

0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

up to 1,300 N/ mm2

Slotting

0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

Roughing

0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

Finishing

0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

Slotting

0.009 0.012 0.024 0.030 0.039 0.048 0.057 0.066

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

up to 240 HB 30

Roughing

0.011 0.012 0.024 0.033 0.042 0.051 0.060 0.072

Finishing

0.010 0.011 0.021 0.027 0.036 0.042 0.054 0.060

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

above 240 HB 30

Slotting

0.009 0.010 0.018 0.024 0.033 0.039 0.048 0.057

Roughing

0.010 0.012 0.024 0.030 0.039 0.048 0.057 0.066

Aluminium, Al-wrought alloys, Al-alloys Al99,5, AlMgSi1, AlMg1 AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5 Aluminium-cast alloys G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg Magnesium-alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3 Non-ferrous metals (copper, short- or long-chipping brass or bronze) SE-Cu, CuSn6, G-CuSn5ZnPb, CuZn39Pb2, CuZn39Pb3, CuZn43Pb2, CuZn20, CuZn33, CuZn37Pb0,5, CuSn7ZnPb, CuPb5Sn5, CuPb10Sn, CuAl5, CuAl9Mn, CuSn10

Finishing

0.010 0.011 0.021 0.027 0.036 0.042 0.054 0.060

up to 3% Si

Slotting

100

0.012 0.014 0.028 0.035 0.046 0.056 0.067 0.077

Roughing

120

0.012 0.014 0.028 0.039 0.049 0.060 0.070 0.084

Finishing

160

0.011 0.013 0.025 0.032 0.042 0.049 0.063 0.070

above 3% Si

Slotting

0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

Roughing

0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

Finishing

130

0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

Slotting

0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

up to 850 N/mm2

Roughing

0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

Finishing

110

0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

Slotting

0.011 0.018 0.025 0.032 0.035 0.046 0.056 0.084

Roughing

0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

Finishing

100

0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

All recommendations are valid for coated tools. For bright milling cutters please vc - 40% and fz -25%!

140

Feed depth (ap)

CUTTING SPEED RECOMMENDATION Guhring no. 3676, 5549, 5573, 3680, 3649, 5556, 3562

CARBIDE Material

Application

vc factor

fz factor

Feed width (ae)

Slotting

1 (0.7 for ap = 2xd)

1xd

0.5 up to 1xd

Roughing

1 (0.7 for ap = 2xd)

0.4 up to 0.9xd

0.5 up to 1xd

Finishing

0.01 up to 0.1xd

1 up to 2xd

HPC-roughing

1.3

1.5

0.15 up to 0.4xd

1 up to 2xd

HSC-roughing

1.5

0.05 up to 0.15xd

1 up to 2xd

Hardness

Structural + free-cutting steels, unalloyed heat-treatable + case hardened steels S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate, E295, E360, P500NH

up to 850 N/ mm2

Free-cutting steels, unalloyed case hardened steels, nitriding steels 11SMnPb30, 11SMn37, 1020, S1214, S1213, S12L13, S12L14, 46S20, 46SPb20

8501,200 N/mm2

Alloyed heat-treatable, tool and high speed steels 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26, 36NiCr6, 41Cr4, 42CrMo4 Spring steel = 55Si7, 55Cr3, 51CrV4

8501,400 N/mm2

Hardened steel Tool steel, heat-treatable steel, spring steel, high-speed steel, case hardened steel, etc. 10CrMo11, 11MnSi6, 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, 15NiCr13, 16MnCr5, 20CrMo5, N33, EN36A

Feed depth (ap)

Recommended Type of cut RF100 type application Vc 2-fluted 2-/3-fluted

fz(mm/z) with nom. ø 3

125 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

Roughing 140 0.014 0.028 0.039 0.049 0.060 0.070 0.084 0.119

4-fluted

Finishing

190 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-fluted

Slotting

110 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-/3-fluted

Roughing 130 0.014 0.028 0.039 0.049 0.060 0.070 0.084 0.119

4-fluted

Finishing

150 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-fluted

Slotting

95 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-/3-fluted 4-fluted

up to 54 HRC

Slotting

Roughing 115 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112 Finishing

140 0.011 0.021 0.028 0.035 0.042 0.049 0.063 0.091

2-fluted

Slotting

50 0.007 0.015 0.018 0.024 0.027 0.036 0.042 0.060

2-/3-fluted

Roughing

75 0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

4-fluted

Finishing

105 0.009 0.018 0.024 0.030 0.036 0.042 0.054 0.078

Slotting

85 0.009 0.018 0.024 0.030 0.036 0.042 0.054 0.078

54-60 HRC

Stainless steel X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630

up to 750 N/ mm2

Stainless steel X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 304, 310, 316, 316Ti, 321

750850 N/ mm2

Stainless steel X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, 420C, 431, 440C

above 850 N/ mm2

Special alloys (nickel based “Ni”) Nimonic, Inconel, Monel, Hastelloy

up to 1,300 N/mm2

2-/3-fluted

Roughing

25 0.006 0.012 0.018 0.021 0.024 0.033 0.039 0.048

4-fluted

Finishing

30 0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

up to 1,300 N/mm2

2-fluted

Slotting

40 0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

2-/3-fluted

Roughing

60 0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

4-fluted

Finishing

90 0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

2-fluted

Slotting

115 0.012 0.024 0.030 0.039 0.048 0.057 0.066 0.096

Titanium alloys (“Ti”) Ti99,5, TiAl5Sn2,5, TiCu2, TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2 Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

up to 240 HB 30

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

above 240 HB 30

Aluminium, Al-wrought alloys, Al-alloys Al99,5, AlMgSi1, AlMg1 AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5 Aluminium-cast alloys G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg

up to 3% Si above 3% Si

Magnesium-alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3 Non-ferrous metals (copper, short- or long-chipping brass or bronze) SE-Cu, CuSn6, G-CuSn5ZnPb, CuZn39Pb2, CuZn39Pb3, CuZn43Pb2, CuZn20, CuZn33, CuZn37Pb0,5, CuSn7ZnPb, CuPb5Sn5, CuPb10Sn, CuAl5, CuAl9Mn, CuSn10

MILLING CUTTERS

(CARBIDE UNIVERSAL END MILLS 2-/3-/4- FLUTED TYPE N)

2-fluted 2-/3-fluted 4-fluted

Finishing

2-fluted

Slotting

55 0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

2-/3-fluted

Roughing

85 0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

4-fluted

Finishing

100 0.009 0.018 0.024 0.030 0.036 0.042 0.054 0.078

2-fluted

Slotting

50 0.007 0.015 0.018 0.024 0.027 0.036 0.042 0.060

2-/3-fluted

Roughing

70 0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

4-fluted

Finishing

85 0.009 0.015 0.021 0.027 0.030 0.039 0.048 0.072

2-fluted

Slotting

20 0.006 0.009 0.012 0.015 0.018 0.024 0.030 0.036

2-/3-fluted 4-fluted 2-fluted 2-/3-fluted

125 0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

Roughing 125 0.012 0.024 0.033 0.042 0.051 0.060 0.072 0.102 Finishing

155 0.011 0.021 0.027 0.036 0.042 0.054 0.060 0.090

Slotting

100 0.010 0.018 0.024 0.033 0.039 0.048 0.057 0.084

Roughing 115 0.012 0.024 0.030 0.039 0.048 0.057 0.066 0.096

4-fluted

Finishing

140 0.011 0.021 0.027 0.036 0.042 0.054 0.060 0.090

2-fluted

Slotting

350 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

2-/3-fluted

Roughing 420 0.014 0.028 0.039 0.049 0.060 0.070 0.084 0.119

4-fluted

Finishing

700 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-fluted

Slotting

160 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-/3-fluted

Roughing 200 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

4-fluted

Finishing

245 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-fluted

Slotting

125 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-/3-fluted

up to 850 N/ mm2

Roughing 100 0.011 0.021 0.027 0.036 0.042 0.054 0.060 0.090

Roughing 150 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

4-fluted

Finishing

200 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-fluted

Slotting

175 0.011 0.018 0.025 0.032 0.035 0.046 0.056 0.084

2-/3-fluted 4-fluted

Roughing 210 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098 Finishing

280 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

All recommendations are valid for coated tools. For bright milling cutters please vc - 40% and fz -25%!

141

CUTTING SPEED RECOMMENDATION

(CARBIDE SLOT DRILLS - 2 FLUTED TYPE W FOR ALUMINIUM) MILLING CUTTERS

Guhring no. 5743, 3358

CARBIDE Material

Application

vc factor

fz factor

Feed width (ae)

Slotting

1 (0.7 for ap = 2xd)

1xd

0.5 up to 1xd

Roughing

1 (0.7 for ap = 2xd)

0.4 up to 0.9xd

0.5 up to 1xd

Finishing

0.01 up to 0.1xd

1 up to 2xd

HPC-roughing

1.3

1.5

0.15 up to 0.4xd

1 up to 2xd

HSC-roughing

1.5

0.05 up to 0.15xd

1 up to 2xd

Hardness

Structural + free-cutting steels, unalloyed heat-treatable + case hardened steels S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate, E295, E360, P500NH

up to 850 N/ mm2

Free-cutting steels, unalloyed case hardened steels, nitriding steels 11SMnPb30, 11SMn37, 1020, S1214, S1213, S12L13, S12L14, 46S20, 46SPb20

8501,200 N/mm2

Alloyed heat-treatable, tool and high speed steels 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26, 36NiCr6, 41Cr4, 42CrMo4 Spring steel = 55Si7, 55Cr3, 51CrV4

8501,400 N/mm2

Stainless steel X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 304, 310, 316, 316Ti, 321

750850 N/ mm2

Stainless steel X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, 420C, 431, 440C

above 850 N/ mm2

Special alloys (nickel based “Ni”) Nimonic, Inconel, Monel, Hastelloy

up to 1,300 N/mm2

Titanium alloys (“Ti”) Ti99,5, TiAl5Sn2,5, TiCu2, TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2

up to 1,300 N/mm2

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

up to 240 HB 30

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

above 240 HB 30

Aluminium, Al-wrought alloys, Al-alloys Al99,5, AlMgSi1, AlMg1 AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5

up to 3% Si above 3% Si

Magnesium-alloys MgMn2, G-MgAl8Zn1, G-MgAl6Zn3 -

up to 850 N/ mm2

2-fluted

Slotting

350 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

2-fluted

Roughing 420 0.014 0.028 0.039 0.049 0.060 0.070 0.084 0.119

2-fluted

Finishing

700 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-fluted

Slotting

160 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-fluted

Roughing 200 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

2-fluted

Finishing

245 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-fluted

Slotting

125 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-fluted

Roughing 150 0.014 0.028 0.035 0.046 0.056 0.067 0.077 0.112

2-fluted

Finishing

200 0.013 0.025 0.032 0.042 0.049 0.063 0.070 0.105

2-fluted

Slotting

175 0.011 0.018 0.025 0.032 0.035 0.046 0.056 0.084

2-fluted

Roughing 210 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

2-fluted

Finishing

280 0.011 0.021 0.028 0.039 0.046 0.056 0.067 0.098

All recommendations are valid for coated tools. For bright milling cutters please vc - 40% and fz -25%!

142

fz(mm/z) with nom. ø 3

54-60 HRC up to 750 N/ mm2

Non-ferrous metals (copper, short- or long-chipping brass or bronze) SE-Cu, CuSn6, G-CuSn5ZnPb, CuZn39Pb2, CuZn39Pb3, CuZn43Pb2, CuZn20, CuZn33, CuZn37Pb0,5, CuSn7ZnPb, CuPb5Sn5, CuPb10Sn, CuAl5, CuAl9Mn, CuSn10

Recommended Type of cut RF100 type application Vc

up to 54 HRC

Stainless steel X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630

Aluminium-cast alloys G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg

Feed depth (ap)

CUTTING SPEED RECOMMENDATION Guhring no. 3472, 3473, 3892, 5735, 5535, 5582, 3114, 3803, 3499 Stable conditions: - good cooling - sufficient performance - short-chipping Material Structural + free-cutting steels, unalloyed heat-treatable + case hardened steels S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate, E295, E360, P500NH

Application

vc factor

fz factor

Feed width (ae)

Slotting

1 (0.7 for ap = 2xd)

1xd

0.5 up to 1xd

Roughing

1 (0.7 for ap = 2xd)

0.4 up to 0.9xd

0.5 up to 1xd

Finishing

0.01 up to 0.1xd

1 up to 2xd

HPC-roughing

1.3

1.5

0.15 up to 0.4xd

1 up to 2xd

HSC-roughing

1.5

0.05 up to 0.15xd

1 up to 2xd

Hardness

up to 850 N/ mm2

Free-cutting steels, unalloyed case hardened steels, nitriding steels 11SMnPb30, 11SMn37, 1020, S1214, S1213, S12L13, S12L14, 46S20, 46SPb20

8501,200 N/mm2

Alloyed heat-treatable, tool and high speed steels 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26, 36NiCr6, 41Cr4, 42CrMo4 Spring steel = 55Si7, 55Cr3, 51CrV4

8501,400 N/mm2

up to 54 HRC 54-60 HRC

Stainless steel X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630

up to 750 N/ mm2

Stainless steel X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 304, 310, 316, 316Ti, 321

750-850 N/mm2

Stainless steel X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, 420C, 431, 440C

above 850 N/ mm2

Special alloys (nickel based “Ni”) Nimonic, Inconel, Monel, Hastelloy

up to 1,300 N/mm2

Titanium alloys (“Ti”) Ti99,5, TiAl5Sn2,5, TiCu2, TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2

up to 1,300 N/mm2

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

up to 240 HB 30

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

above 240 HB 30

Aluminium, Al-wrought alloys, Al-alloys Al99,5, AlMgSi1, AlMg1 AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5

up to 3% Si

Aluminium-cast alloys G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg

above 3% Si

Feed depth (ap)

up to 850 N/ mm2

Recommended RF100 type

Type of application

cut Vc

Slotting

180 0.018 0.035 0.045 0.06

Roughing

200

Finishing

280 0.016 0.03

Slotting

160 0.018 0.035 0.045 0.06

Roughing

180

Finishing

220 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

Slotting

135 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

Roughing

160

0.05 0.065 0.08 0.095 0.11

0.16

Finishing

200 0.015 0.03

0.04

0.13

MILLING CUTTERS

(RF 100 U, F, VA, A, TI, H, CARBIDE MILLING CUTTERS FOR STABLE CONDITIONS)

fz(mm/z) with nom. ø 3

0.02

0.07

0.09

0.1

0.15

0.04 0.055 0.07 0.085

0.1

0.12

0.17

0.04 0.055 0.065 0.08 0.095 0.14 0.07

0.09

0.1

0.15

0.04 0.055 0.07 0.085

0.1

0.12

0.17

0.04

0.012 0.025 0.03

0.05

0.06

0.07

0.09

0.04 0.045 0.06

Slotting

0.07

0.1

Roughing

110 0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.12

Finishing

150 0.015 0.03

0.13

0.04

0.05

0.06

0.07

0.09

Slotting H

Roughing

Finishing

110

Slotting

120 0.015 0.03

VA SF

0,08

0,09

0.05

0.06

0.07

0.09

0.13

Roughing

140 0.018 0.035 0.045 0.06

0.07

0.09

0.1

0.15

Finishing

180 0.016 0.03 80

0,01 0,015 0,025 0,035 0,042 0,05 0.04

0.04 0.055 0.065 0.08 0.095 0.14

Slotting

Roughing

120 0.016 0.03

0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.04 0.055 0.065 0.08 0.095 0.14 0.04

Finishing

140 0.015 0.03

VA/F

Slotting

0.07

0.09

0.04 0.045 0.06

0.07

VA/F

0.1

Roughing

100 0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.12

0.012 0.025 0.03

0.05

0.06

0.12 0.13

Finishing

120 0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.12

Ti/U

Slotting

0.06

Ti/U

Roughing

0.01

Finishing

0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.12

Ti/U

Slotting

0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.12

Ti/U

Roughing

0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

Finishing

130 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14 0.05 0.065 0.08 0.095 0.11

0,01 0.015 0.02 0.025 0.03 0.02

0.04

0.05

0.03 0.035 0.04 0.055 0.065 0.08

Slotting

160

0.02

0.04

Roughing

180

0.02

0.04 0.055 0.07 0.085

Finishing

220 0.018 0.035 0.045 0.06

0.07

Slotting

Roughing

Finishing

200 0.018 0.035 0.045 0.06

Slotting

500

0.02

0.04

Roughing

600

0.02

0.04 0.055 0.07 0.085

Finishing

1000 0.018 0.035 0.045 0.06

0.16

0.1

0.12

0.17

0.09

0.1

0.15

140 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

160

0.05 0.065 0.08 0.095 0.11

0.02

0.04

0.07

0.1

0.15

0.05 0.065 0.08 0.095 0.11

0.16

0.07

0.09

0.16

0.1

0.12

0.17

0.09

0.1

0.15

Slotting

230 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

Roughing

280

0.05 0.065 0.08 0.095 0.11

Finishing

350 0.018 0.035 0.045 0.06

0.02

0.04

0.07

0.09

0.1

0.16 0.15

Slotting

180 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

Roughing

220

0.05 0.065 0.08 0.095 0.11

Finishing

280 0.018 0.035 0.045 0.06

0.1

0.15

Slotting

250 0.015 0.025 0.035 0.045 0.05 0.065 0.08

0.12

Roughing

300 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

Finishing

400 0.016 0.03

0.04 0.055 0.065 0.08 0.095 0.14

0.02

0.04

0.07

0.09

0.16

All recommendations are valid for coated tools. For bright milling cutters please vc - 40% and fz -25%!

143

CUTTING SPEED RECOMMENDATION (RF 100 DIVER, CARBIDE MILLING CUTTERS) MILLING CUTTERS

Guhring no. 6736, 6737 PLUNGING* AND RAMPING* Material/ISO material

Hardness

Struct./free-cutting steels, unall. heat-treat./case hard. steels

up to 850 N/mm²

Ramping Ramping depth* max. angle (ap max.) in º 1xd 45°

Cutting speed (vc) 270

fz(mm/z) with nom. ø 5.7

7.7

9.7

11.7

15.6

19.5

0.020 0.030 0.040 0.045 0.050 0.060

Free-cutting steels, unalloyed case hard. steels, nitr. steels

850 - 1200 N/mm²

1xd

45°

240

0.015 0.020 0.035 0.040 0.045 0.050

Alloyed heat-treatable, tool and high speed steels

850 - 1400 N/mm²

1xd

30°

200

0.010 0.015 0.025 0.030 0.035 0.040

Stainless steel - easy to machine / sulphured Stainless steel - moderately difficult to machine Cast iron, grey cast iron, spher. graphite/malleable cast iron

up to 750 N/mm²

1xd

10°

0.010 0.015 0.025 0.030 0.035 0.040

over 750 - 950 N/mm²

0.5xd

5°

0.010 0.015 0.020 0.025 0.030 0.035

over 240 HB 30

1xd

45°

150

0.020 0.030 0.040 0.045 0.050 0.060

Aluminium, Al-wrought alloys, Al-alloys

up to 3% Si

1xd

30°

180

0.015 0.020 0.035 0.040 0.045 0.050

Aluminium-cast alloys

over 3% Si

1xd

45°

140

0.020 0.030 0.040 0.045 0.050 0.060

up to 1400 N/mm²

0.5xd

10°

0.010 0.015 0.020 0.025 0.030 0.035

fz(mm/z) with nom. ø

Titanium, Titanium alloys

* peripheral cooling „Guhrojet“ recommended for optimal chip evacuation and tool life

SLOTTING* Material/ISO material

Hardness

Cutting depth* (ap)

Cutting width (ae)

Cutting speed (vc)

Struct./free-cutting steels, unall. heat-treat./case hard. steels

up to 850 N/mm²

1xd

270

5.7

7.7

9.7

11.7

15.6

19.5

0.025 0.035 0.050 0.060 0.080 0.100

Free-cutting steels, unalloyed case hard. steels, nitr. steels

850 - 1200 N/mm²

1xd

240

0.025 0.035 0.050 0.060 0.080 0.100

Alloyed heat-treatable, tool and high speed steels

850 - 1400 N/mm²

1xd

200

0.025 0.030 0.045 0.050 0.070 0.085

Stainless steel - easy to machine / sulphured Stainless steel - moderately difficult to machine Cast iron, grey cast iron, spher. graphite/malleable cast iron

up to 750 N/mm²

1xd

120

0.020 0.030 0.045 0.060 0.065 0.075

over 750 - 950 N/mm²

1xd

0.020 0.030 0.040 0.045 0.060 0.070 0.025 0.035 0.050 0.060 0.080 0.100

over 240 HB 30

1xd

160

Aluminium, Al-wrought alloys, Al-alloys

up to 3% Si

1xd

500

0.030 0.040 0.065 0.080 0.095 0.110

Aluminium-cast alloys

over 3% Si

1xd

340

0.020 0.030 0.055 0.065 0.080 0.100

up to 1400 N/mm²

1xd

0.020 0.030 0.040 0.045 0.060 0.070

fz(mm/z) with nom. ø

Titanium, Titanium alloys

* peripheral cooling „Guhrojet“ recommended for optimal chip evacuation and tool life

HPC-ROUGHING* AND HSC-FINISHING** Material/ISO material

Hardness

Cutting depth* (ap)

Cutting width (ae)

Cutting speed (vc)

Struct./free-cutting steels, unall. heat-treat./case hard. steels

up to 850 N/mm²

2xd

0.4xd

350

5.7

7.7

9.7

11.7

15.6

19.5

0.030 0.045 0.060 0.075 0.090 0.110

Free-cutting steels, unalloyed case hard. steels, nitr. steels

850 - 1200 N/mm²

2xd

0.4xd

290

0.030 0.045 0.060 0.075 0.090 0.110

Alloyed heat-treatable, tool and high speed steels

850 - 1400 N/mm²

2xd

0.3xd

240

0.025 0.030 0.055 0.070 0.085 0.100

Stainless steel - easy to machine / sulphured Stainless steel - moderately difficult to machine Cast iron, grey cast iron, spher. graphite/malleable cast iron

up to 750 N/mm²

2xd

0.3xd

140

0.025 0.035 0.055 0.065 0.080 0.090

over 750 - 950 N/mm²

2xd

0.25xd

120

0.020 0.030 0.045 0.050 0.065 0.075

over 240 HB 30

2xd

0.4xd

180

0.030 0.045 0.060 0.075 0.090 0.110

Aluminium, Al-wrought alloys, Al-alloys

up to 3% Si

2xd

0.5xd

600

0.040 0.060 0.080 0.100 0.120 0.150

Aluminium-cast alloys

over 3% Si

2xd

0.4xd

420

0.030 0.045 0.060 0.075 0.090 0.110

up to 1400 N/mm²

2xd

0.4xd

120

0.020 0.030 0.045 0.050 0.065 0.075

Titanium, Titanium alloys

* peripheral cooling „Guhrojet“ recommended for optimal chip evacuation and tool life ** for HSC machining the cutting speed can be increased by 50%, feed rate fz can be reduced depending on surface requirements. *** for trochoidal milling and imachining with ae = 0.1-0.2xd the cutting speed vc and the feed rate can be increased by 50 %.

DRILLING* Material/ISO material

Hardness

Cutting speed (vc)

fz(mm/z) with nom. ø 5.7

7.7

9.7

11.7

15.6

19.5

Struct./free-cutting steels, unall. heat-treat./case hard. steels

up to 850 N/mm²

2xd

270

0.020 0.030 0.040 0.045 0.050 0.060

Free-cutting steels, unalloyed case hard. steels, nitr. steels

850 - 1200 N/mm²

2xd

240

0.015 0.020 0.035 0.040 0.045 0.050

Alloyed heat-treatable, tool and high speed steels

850 - 1400 N/mm²

1xd

200

0.010 0.015 0.025 0.030 0.035 0.040

over 240 HB 30

2xd

150

0.020 0.030 0.040 0.045 0.050 0.060

Cast iron, grey cast iron, spher. graphite/malleable cast iron Aluminium, Al-wrought alloys, Al-alloys

up to 3% Si

1xd

180

0.015 0.020 0.035 0.040 0.045 0.050

Aluminium-cast alloys

over 3% Si

1xd

140

0.020 0.030 0.040 0.045 0.050 0.060

* pecking recommended from drilling depth 1XD * peripheral cooling „Guhrojet“ recommended for optimal chip evacuation and tool life

144

Cutting depth** (ap)

CUTTING SPEED RECOMMENDATION Tool length/reach Tool length/reach Tool length/reach

up to 3xD 3-5xD > 5-10xD

Vc and fz Vc and fz Vc and fz

100% 80% 60%

Application Roughing

Guhring no. 3679, 3359, 3360, 3050, 3727, 3043 Material

Finishing Hardness

Structural + free-cutting steels, unalloyed heat-treatable + case hardened steels S185, P275N, P235GH, P265GH, Mild steel, Grade 250 plate, Grade 350 plate, E295, E360, P500NH

up to 850 N/ mm2

Free-cutting steels, unalloyed case hardened steels, nitriding steels 11SMnPb30, 11SMn37, 1020, S1214, S1213, S12L13, S12L14, 46S20, 46SPb20

8501,200 N/mm2

Alloyed heat-treatable, tool and high speed steels 50MnSi4, 38Cr2, 28Cr4, 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26, 36NiCr6, 41Cr4, 42CrMo4 Spring steel = 55Si7, 55Cr3, 51CrV4

8501,400 N/mm2

up to 54 HRC 54-60 HRC

Nom. diameter (mm)

Width/depth ae

(mm)

0.1

0.15

0.2

0.4

0.6

0.75

1.2

(mm)

0.15

0.3

0.5

0.75

1.5

(mm)

0.05

0.07

0.1

0.14

0.16

0.18

0.2

0.3

(mm)

0.05

0.07

0.1

0.15

0.2

0.25

0.3

RecomType of cut mended type application Vc

fz(mm/z) with nom. ø 8

2-/4-fluted

Roughing

175 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

350 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Roughing

175 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

245 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Roughing

140 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

210 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

Roughing Finishing Roughing Finishing

Stainless steel X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS18-9, 410S, 430F, 630

up to 750 N/ mm2

2-/4-fluted

Roughing

126 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

196 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

Stainless steel X5CrNi18-10, X6CrNiTi18-10, X6CrNiMoTi 17-12-2, 302, 303, 304, 310, 316, 316Ti, 321

750850 N/ mm2

2-/4-fluted

Roughing

91 0.014 0.021 0.025 0.028 0.035 0.049 0.056 0.070

2-/4-fluted

Finishing

140 0.018 0.021 0.028 0.032 0.035 0.049 0.070 0.084

Stainless steel X20CrNi172, X39CrMo17-1, X2CrMoTi18-2, 410, 410X, 416, 420, 420C, 431, 440C

above 850 N/ mm2

2-/4-fluted

Roughing

56 0.014 0.021 0.025 0.028 0.035 0.049 0.056 0.070

2-/4-fluted

Finishing

91 0.018 0.021 0.028 0.032 0.035 0.049 0.070 0.084

Special alloys (nickel based “Ni”) Nimonic, Inconel, Monel, Hastelloy

up to 1,300 N/mm2

2-/4-fluted

Roughing

28 0.007 0.014 0.021 0.025 0.028 0.035 0.049 0.056

2-/4-fluted

Finishing

42 0.014 0.018 0.021 0.028 0.032 0.042 0.056 0.063

Titanium alloys (“Ti”) Ti99,5, TiAl5Sn2,5, TiCu2, TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2

up to 1,300 N/mm2

2-/4-fluted

Roughing

56 0.014 0.021 0.025 0.028 0.035 0.049 0.056 0.070

2-/4-fluted

Finishing

105 0.018 0.021 0.028 0.032 0.035 0.049 0.070 0.084

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

up to 240 HB 30

Cast iron, grey cast iron, spheroidal graphite and malleable cast iron GG10, GG15, GG20, GG25, GG30, GG35 GG40 GGG40, GGG50, GGG60, 32510,GTW35

above 240 HB 30

Aluminium, Al-wrought alloys, Al-alloys Al99,5, AlMgSi1, AlMg1 AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1,5

up to 3% Si

Aluminium-cast alloys G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi9 G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg

above 3% Si

MILLING CUTTERS

(CARBIDE UNIVERSAL SLOT DRILLS AND END MILLS WITH BALL NOSE)

2-/4-fluted

Roughing

140 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

210 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Roughing

105 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

161 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Roughing

196 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

245 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Roughing

175 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

2-/4-fluted

Finishing

280 0.021 0.028 0.032 0.035 0.049 0.070 0.084 0.105

up to 850 N/ mm2

All recommendations are valid for coated tools. For bright milling cutters please vc - 40% and fz -25%!

145

REAMERS

HELIX ANGLE INTERNAL COOLANT BRIGHT FINISH

HR500

TAPER SHANK THROUGH HOLE

REAMERS MACHINE REAMERS

HAND-REAMERS

METRIC CARBIDE HSS-E

HIGH-PERFORMANCE IMPERIAL TAPER SHANK

146

REAMING

FLUTE

NC MACHINE REAMERS

CUTTING EDGE

TiAlN COATING

HAND REAMERS Guhring no.

REAMERS

413

Standard

DIN 206

Tool material

HSS

Surface Form

Cutting direction

right-hand

Tolerance

Helix angle

8º

Hole type

Through hole

l4 l1

5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000 9.500 10.000 10.500 11.000 11.500 12.000 12.500 13.000 14.000 15.000 16.000 16.500 17.000 18.000 19.000 20.000 21.000 22.000 24.000 25.000 28.000 30.000 31.000 32.000 33.000 34.000 35.000 38.000 40.000 43.000

87.00 93.00 93.00 100.00 107.00 107.00 115.00 115.00 124.00 124.00 133.00 133.00 142.00 142.00 152.00 152.00 152.00 163.00 163.00 175.00 175.00 175.00 188.00 188.00 201.00 201.00 215.00 231.00 231.00 247.00 247.00 265.00 265.00 265.00 284.00 284.00 305.00 305.00 326.00

44.00 47.00 47.00 50.00 54.00 54.00 58.00 58.00 62.00 62.00 66.00 66.00 71.00 71.00 76.00 76.00 76.00 81.00 81.00 87.00 87.00 87.00 93.00 93.00 100.00 100.00 107.00 115.00 115.00 124.00 124.00 133.00 133.00 133.00 142.00 142.00 152.00 152.00 163.00

3.80 4.30 4.90 4.90 5.50 6.20 6.20 7.00 7.00 8.00 8.00 8.00 9.00 9.00 9.00 10.00 10.00 11.00 12.00 12.00 13.00 13.00 14.50 14.50 16.00 16.00 18.00 18.00 20.00 22.00 24.00 24.00 24.00 26.00 26.00 29.00 29.00 32.00 35.00

AVAILABILITY

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 12

• m

• • • • m

• • • • m m m m m m m m m m m m m m

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

147

MACHINE REAMERS REAMERS

Guhring no. Standard

468

5004

DIN 212-2

Tool material

HSS-E

Surface Form Cutting direction

right-hand

Tolerance Helix angle

8º

Through hole

Hole type

l4 l2 l1

d1 mm

inch

4.000 4.500 5.000 5.500 6.000 6.500 7.000 8.000 9.000 10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

12.700 14.287 15.875 19.050 22.225 25.400

1/2 9/16 5/8 3/4 7/8 1

4.000 4.500 5.000 5.600 5.600 6.300 7.100 8.000 9.000 10.000 10.000 10.000 10.000 12.500 12.500 12.500 14.000 14.000 16.000 16.000

75.00 80.00 86.00 93.00 93.00 101.00 109.00 117.00 125.00 133.00 142.00 151.00 151.00 160.00 162.00 170.00 175.00 182.00 189.00 195.00

47.00 52.00 58.00 57.00 57.00 65.00 73.00 81.00 85.00 93.00 102.00 111.00 111.00 115.00 117.00 125.00 130.00 137.00 141.00 147.00

19.00 21.00 23.00 26.00 26.00 28.00 31.00 33.00 36.00 38.00 41.00 44.00 44.00 47.00 50.00 52.00 54.00 56.00 58.00 60.00

6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8

10.000 151.00 111.00 12.500 162.00 117.00 12.500 170.00 125.00 16.000 189.00 141.00 18.000 217.00 161.00 20.000 234.00 174.00

44.00 50.00 52.00 58.00 66.00 70.00

6 8 8 8 8 8

AVAILABILITY • • • • • • • • • • • • • • • • • • • •

• • • • • •

• Australian stock item

148

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MACHINE REAMERS Guhring no.

REAMERS

496

Standard

DIN 212

Tool material

HSS-E

Surface Form

Cutting direction

right-hand

Tolerance

+0.004/+0.005

Helix angle

8º

Hole type

through hole

l4 l1

d1 mm 1.000 1.020 1.100 1.200 1.300 1.320 1.400 1.500 1.520 1.590 1.600 1.700 1.780 1.800 1.870 1.900 1.990 2.000 2.010 2.020 2.100 2.200 2.300 2.380 2.400 2.490 2.500 2.520 2.530 2.600 2.700 2.800 2.900 2.960 2.980 2.990 3.000 3.010 3.020

inch

1/18

3/32

1.00 1.10 1.10 1.20 1.20 1.20 1.40 1.50 1.60 1.60 1.60 1.60 1.80 1.80 1.80 1.80 2.00 2.00 2.00 2.00 2.00 2.20 2.20 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.80 2.80 3.00 3.00 3.00 3.00 3.00 3.20 3.20

34.00 34.00 36.00 38.00 38.00 38.00 40.00 40.00 43.00 43.00 43.00 43.00 46.00 46.00 46.00 46.00 49.00 49.00 49.00 49.00 49.00 53.00 53.00 57.00 57.00 57.00 57.00 57.00 57.00 57.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 65.00 65.00

15.00 15.50 16.50 16.50 16.50 18.00 18.00 20.00 20.00 20.00 20.00 22.00 22.00 22.00 22.00 24.00 24.00 24.00 24.00 24.00 25.00 25.00 29.00 29.00 29.00 29.00 29.00 29.00 29.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 37.00 37.00

5.50 5.50 6.50 7.50 7.50 7.50 8.00 8.00 9.00 9.00 9.00 9.00 10.00 10.00 10.00 10.00 11.00 11.00 11.00 11.00 11.00 12.00 12.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 16.00 16.00

z 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6

steam tempered

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

Available in 0.01mm increments on request

bright

AVAILABILITY

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

149

MACHINE REAMERS REAMERS

Guhring no.

496

Standard

DIN 212

Tool material

HSS-E

Surface Form

Cutting direction

right-hand

Tolerance

+0.004/+0.005

Helix angle

8º

Hole type

through hole

l4 l1

d1 mm 3.100 3.170 3.180 3.200 3.300 3.370 3.380 3.400 3.480 3.500 3.520 3.570 3.600 3.700 3.730 3.760 3.800 3.900 3.970 3.980 3.990 4.010 4.020 4.030 4.100 4.150 4.200 4.300 4.370 4.400 4.600 4.700 4.750 4.760 4.800 4.900 4.980 4.990 5.010

inch 1/8

9/64

5/32

11/64

3/16

3.20 3.20 3.20 3.20 3.20 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.50 4.50 4.50 4.50 4.50 4.50 5.00 5.00 5.00 5.00 5.00 5.00

65.00 65.00 65.00 65.00 65.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 80.00 80.00 80.00 80.00 80.00 80.00 86.00 86.00 86.00 86.00 86.00 86.00

37.00 37.00 37.00 37.00 37.00 42.00 42.00 42.00 42.00 42.00 42.00 42.00 42.00 42.00 42.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 52.00 52.00 52.00 52.00 52.00 52.00 58.00 58.00 58.00 58.00 58.00 58.00

16.00 16.00 16.00 16.00 16.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 21.00 21.00 21.00 21.00 21.00 21.00 23.00 23.00 23.00 23.00 23.00 23.00

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

bright

steam tempered

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

Available in 0.01mm increments on request

150

AVAILABILITY

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MACHINE REAMERS Guhring no.

REAMERS

496

Standard

DIN 212

Tool material

HSS-E

Surface Form

Cutting direction

right-hand

Tolerance

+0.004/+0.005

Helix angle

8º

Hole type

through hole

l4 l1

d1 mm 5.020 5.040 5.100 5.200 5.300 5.400 5.500 5.600 5.700 5.800 5.900 5.980 5.990 6.010 6.020 6.100 6.200 6.300 6.340 6.350 6.370 6.400 6.500 6.600 6.700 6.800 6.900 7.020 7.100 7.140 7.200 7.300 7.400 7.500 7.600 7.700 7.800 7.900 7.930

inch

1/4

5.00 5.00 5.00 5.00 5.00 5.60 5.60 5.60 5.60 5.60 5.60 5.60 5.60 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30 7.10 7.10 7.10 7.10 7.10 7.10 7.10 7.10 7.10 8.00 8.00 8.00 8.00 8.00

86.00 86.00 86.00 86.00 86.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 117.00 117.00 117.00 117.00 117.00

58.00 58.00 58.00 58.00 58.00 57.00 57.00 57.00 57.00 57.00 57.00 57.00 57.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 73.00 73.00 73.00 73.00 73.00 73.00 73.00 73.00 73.00 81.00 81.00 81.00 81.00 81.00

23.00 23.00 23.00 23.00 23.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 33.00 33.00 33.00 33.00 33.00

9/32

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

steam tempered

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

Available in 0.01mm increments on request

bright

AVAILABILITY

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

151

MACHINE REAMERS REAMERS

Guhring no.

496

Standard

DIN 212

Tool material

HSS-E

Surface Form

Cutting direction

right-hand

Tolerance

+0.004/+0.005

Helix angle

8º

Hole type

through hole

l4 l1

inch

7.940 7.980 8.010 8.020 8.030 8.100 8.200 8.300 8.400 8.500 8.600 8.700 8.730 8.800 8.900 8.960 8.980 9.100 9.200 9.300 9.400 9.500 9.520 9.530 9.540 9.600 9.700 9.800 9.900 9.980 9.990 10.010 10.020 10.030 10.100 10.200 10.300 10.320 10.400

5/16

8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00

117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00

81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 85.00 85.00 85.00 85.00 85.00 85.00 85.00 85.00 85.00 85.00 85.00 85.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00

33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00

11/32

3/8

13/32

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

bright

steam tempered

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

Available in 0.01mm increments on request

152

AVAILABILITY

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MACHINE REAMERS Guhring no.

REAMERS

496

Standard

DIN 212

Tool material

HSS-E

Surface Form

Cutting direction

right-hand

Tolerance

+0.004/+0.005

Helix angle

8º

Hole type

through hole

l4 l1

d1 mm

inch

10.500 10.530 10.600 10.700 10.800 10.900 11.020 11.100 11.110 11.200 11.300 11.400 11.500 11.600 11.700 11.800 11.900 11.980 11.990 12.020 12.040

7/16

10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00

133.00 133.00 133.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 151.00 151.00 151.00 151.00 151.00

93.00 93.00 93.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 111.00 111.00 111.00 74.50 74.50

38.00 38.00 38.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 44.00 44.00 44.00 44.00 44.00

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

steam tempered

• • • • • • • • • • • • • • • • • • • • •

• Australian stock item

Available in 0.01mm increments on request

bright

AVAILABILITY

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

153

MACHINE REAMERS (TAPER SHANK) REAMERS

Guhring no.

405

Standard

DIN 208

Tool material

HSS-E

Surface Form

Cutting direction

right-hand

Tolerance

Helix angle

8º

Hole type

through hole

MT l4 l2 l1

mm 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000 21.000 22.000 23.000 24.000 25.000 26.000 28.000 30.000 32.000 34.000 35.000 36.000 38.000 40.000 50.000

1 1 2 2 2 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 4 4

182.00 189.00 204.00 210.00 214.00 219.00 223.00 228.00 232.00 237.00 241.00 268.00 268.00 273.00 277.00 281.00 317.00 321.00 321.00 325.00 329.00 329.00 344.00

120.00 127.00 129.00 135.00 139.00 144.00 148.00 153.00 157.00 162.00 166.00 174.00 174.00 179.00 183.00 187.00 199.50 203.50 203.50 207.50 211.50 211.50 226.50

44.00 47.00 50.00 52.00 54.00 56.00 58.00 60.00 62.00 64.00 66.00 68.00 68.00 70.00 71.00 73.00 77.00 78.00 78.00 79.00 81.00 81.00 86.00

AVAILABILITY

6 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 12

• • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

154

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MACHINE REAMERS Guhring no.

DIN 8093

Tool material

Carbide

REAMERS

1409

Standard Surface Form

Cutting direction

right-hand

Tolerance

Helix angle

8º

Hole type

through hole

l4 l2 l1

1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000 9.500 10.000 10.500 11.000 12.000 13.000 14.000 15.000 16.000 18.000 19.000 20.000

1.000 1.500 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.600 5.600 6.300 7.100 7.100 8.000 8.000 9.000 9.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 14.000 16.000 16.000

34.00 40.00 49.00 57.00 61.00 70.00 75.00 80.00 86.00 93.00 93.00 101.00 109.00 109.00 117.00 117.00 125.00 125.00 133.00 133.00 142.00 151.00 151.00 160.00 162.00 170.00 182.00 189.00 195.00

15.50 18.80 25.00 30.30 34.50 43.80 43.00 47.00 52.00 57.00 57.00 63.00 69.00 69.00 75.00 75.00 81.00 81.00 87.00 87.00 96.00 105.00 105.00 110.00 112.00 120.00 130.00 131.00 137.00

5.50 8.00 11.00 14.00 15.00 18.00 19.00 21.00 23.00 26.00 26.00 28.00 31.00 31.00 33.00 33.00 36.00 36.00 38.00 38.00 41.00 44.00 44.00 47.00 50.00 52.00 56.00 58.00 60.00

AVAILABILITY

3 3 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

• m

• • m

• m

• m m

•

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

155

MACHINE REAMERS (TAPER SHANK) REAMERS

Guhring no.

720

Standard

DIN 8051

Tool material

Carbide

Surface Form

Cutting direction

right-hand

Tolerance

Helix angle

8º

Hole type

through hole

MT l4 l2 l1

mm 20.000 22.000 24.000 25.000 26.000 30.000

2 2 3 3 3 3

228.00 237.00 268.00 268.00 273.00 281.00

153.00 162.00 174.00 174.00 179.00 187.00

19.00 22.00 22.00 22.00 22.00 25.00

AVAILABILITY

6 6 8 8 8 8

• • • • • •

• Australian stock item

156

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

HIGH-PERFORMANCE REAMERS Guhring no.

REAMERS

1685

Standard

Guhring std.

Tool material

Carbide

Surface Form

HR 500 S

Cutting direction

right-hand

Tolerance

Helix angle

right-hand helix

Hole type

blind hole

l4 l2 l1

3.000 3.500 4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000 9.500 10.000 10.500 11.000 11.500 12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

4.000 4.000 4.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 14.000 14.000 16.000 16.000 18.000 18.000 20.000 20.000

68.00 68.00 68.00 76.00 76.00 76.00 76.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 130.00 130.00 130.00 130.00 130.00 130.00 150.00 150.00 150.00 150.00 150.00 150.00

40.00 40.00 40.00 40.00 40.00 40.00 40.00 65.00 65.00 65.00 65.00 61.00 61.00 61.00 61.00 85.00 85.00 85.00 85.00 85.00 85.00 102.00 102.00 102.00 102.00 100.00 100.00

12.00 12.00 12.00 12.00 12.00 12.00 12.00 16.00 16.00 16.00 16.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 22.00 22.00 22.00 22.00 25.00 25.00 25.00 25.00

AVAILABILITY

4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

m m m m m m

• m m m

• m m m m m m m m

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

157

CUTTING SPEED RECOMMENDATION REAMERS

Guhring no. Standard/DIN Tool material Surface finish Feed column no.

Countersink Ø mm

< 4.00 4.00 5.00 6.30 8.00 10.00 12.50 16.00 20.00 25.00 31.50 40.00 50.00 > 50.00

0.080 0.100 0.100 0.125 0.160 0.200 0.200 0.250 0.315 0.400 0.400 0.500 0.630 0.800

0.100 0.125 0.125 0.160 0.200 0.250 0.250 0.315 0.400 0.500 0.500 0.630 0.800 1.000

0.125 0.160 0.160 0.200 0.250 0.315 0.315 0.400 0.500 0.630 0.630 0.800 1.000 1.250

Type 75

0.500 0.500 0.600 0.700 1.000 1.200 1.200 1.400 1.400 1.600 2.000 2.000 2.200 2.200

0.800 1.000 1.000 1.200 1.800 1.800 2.000 2.200 2.200 2.500 3.000 3.000 3.200 3.200

1.000 1.200 1.400 1.600 2.400 2.400 2.500 2.600 2.600 3.000 3.600 3.600 3.600 3.600

f (mm/rev.)

0.300 0.300 0.400 0.400 0.600 0.600 0.800 0.800 0.800 1.000 1.000 1.200 1.400 1.600

Coolant: Air Neat oil Soluble oil Tensile strength Hardness MPa (N/mm2)

Material group

Material examples

Common structural steels

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

≤2000

Free-cutting steels Unalloyed heat-treatable steels

Alloyed heat-treatable steels Unalloyed case hardened steels Alloyed case hardened steels Nitriding steels Tool steels High speed steels Spring steels Stainless steels, sulphured austenitic martensitic Hardened steels Special alloys Cast iron Spheroidal graphite iron and malleable cast iron Chilled cast iron Ti and Ti-alloys Aluminium and Al-alloys Al wrought alloys Al cast alloys ≤ 10 % Si ≤ 24 % Si Magnesium alloys Copper, low-alloyed Brass, short-chipping long-chipping Bronze, short-chipping Bronze, long-chipping Duroplastics Thermoplastics New cast materials CGI New cast materials ADI Kevlar Glass, carbon concent. plastics

158

bright

steam tempered

nitrided lands

TiN

Coolant

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100 ≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

MACHINE REAMERS

HIGH PERFORMANCE REAMERS

MACHINE REAMERS

496

468

405

1409

720

1685

212

212-2

208

8093

8051

G.S.

HSS-E B

Carbide

Carbide B

HR500S

PERFECT CLAMPING

REAMERS

CUTTING SPEED RECOMMENDATION

HMC 3000 Hydraulic chucks together with solid carbide micro-precision drills or HR 500 High-performance reamers Direct hydraulic clamping of shanks from ø 3 mm Vc m/min

Vc m/min

Feed col. no.

16 12 12 10 14 12 10 10 8 16 10 8 10 8 14 10 10

72 72 72 71 72 71 71 71 71 72 71 71 71 71 72 71 71

18 16 18 16 18 16 14 14 12 18 14 12 14 12 12 10 10

72 72 72 72 71 72 71 71 71 71 71 71 71 71 71 71 71

6 6 4

72 72 72

8 6 6

71 71 71

4 14 12 12 10

71 71 71 71 71

6 20 18 20 18

71 71 71 71 71

6 4 18 18 20 18 20 18 18 16 20 18 18 14 12 14 8 8

71 71 73 73 72 72 72 72 72 72 72 72 72 72 73 73 71 71

10 10 30 30 40 30 25 25 35 30 35 30 30 25 20 20 16 16

71 71 73 73 72 72 72 72 72 72 72 72 72 72 73 73 71 71

bright

steam tempered

nitrided lands

Vc m/min

Feed col. no.

120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 120-250 60-120 30-60 60-120 40-80 60-120 40-60 30-60 40-60 60-140 60-140 120-250 60-120 30-50 40-60 40-60

75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 75-76 73-74 74-75 74-75 74-75 73-74 73-74 74-75 75-76 75-76 74-75 74-75 74-75 74 74

80-160

75-76

100-250

75-76

100-250 100-250

75-76 75-76

80-200 80-200

75-76 75-76

75-76

80 80 80

75-76 71 71

TiN

TiAlN

Quick, simple and accurate length setting Perfect concentricity R < 3 μm with 10 x d1

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

159

COUNTERSINKS & COUNTERBORES

COUNTERBORING

90ยบ

FRONT / BACK DEBURRER

COUNTERSINKS & COUNTERBORES HIGH-PERFORMANCE

TOLERANCES

COUNTERBORING COUNTERSINKING

IMPERIAL TAPER SHANK

COUNTERBORING

PARALLEL SHANK BRIGHT FINISH 60ยบ 160

METRIC CARBIDE HSS-E TiAlN COATING

3-FLUTE

TAPER SHANK

60º COUNTERSINKS (3-FLUTED) 472

Standard

COUNTERSINKS & COUNTERBORES

Guhring no.

DIN 334

Tool material

HSS

Surface Cutting direction

right-hand

Form

60 o

6.300 8.000 12.500 16.000 20.000 25.000

5.000 6.000 8.000 10.000 10.000 10.000

45.00 50.00 56.00 63.00 67.00 71.00

1.600 2.000 3.200 4.000 5.000 6.300

AVAILABILITY

3 3 3 3 3 3

• • • • • • Coated also available on request.

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

161

90º COUNTERSINKS (3-FLUTED) COUNTERSINKS & COUNTERBORES

Guhring no.

476

Standard

DIN 335

Tool material

HSS

Surface Cutting direction

right-hand C

90 o

Form

4.300 5.000 5.300 5.800 6.000 6.300 7.000 7.300 8.000 8.300 9.400 10.000 10.400 11.500 12.400 13.400 15.000 16.500 19.000 20.500 23.000 25.000 26.000 28.000 30.000 31.000

4.000 4.000 4.000 5.000 5.000 5.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000

40.00 40.00 40.00 45.00 45.00 45.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 56.00 56.00 56.00 60.00 60.00 63.00 63.00 67.00 67.00 67.00 71.00 71.00 71.00

1.300 1.500 1.500 1.500 1.500 1.500 1.800 1.800 2.000 2.000 2.200 2.500 2.500 2.800 2.800 2.900 3.200 3.200 3.500 3.500 3.800 3.800 3.800 4.000 4.200 4.200

AVAILABILITY

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

• • • m m

• m m

• • m

• m

• • • • m

• • • • • Coated also available on request.

• Australian stock item

162

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

90º COUNTERSINKS (3-FLUTED, TAPER SHANK) 477

Standard

COUNTERSINKS & COUNTERBORES

Guhring no.

DIN 335

Tool material

HSS

Surface Cutting direction

right-hand D

90 o

Form

mm 31.000 34.000 37.000 40.000 50.000 63.000

2 2 2 3 3 4

112.00 118.00 118.00 140.00 150.00 180.00

4.200 4.500 4.800 10.000 14.000 16.000

AVAILABILITY

3 3 3 3 3 3

• • • • • • Coated also available on request.

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

163

90º COUNTERSINKS (3-FLUTED) COUNTERSINKS & COUNTERBORES

Guhring no.

5008

Standard

Guhring std.

Tool material

Carbide

Surface

F 90º

90 o

Angle

8.000 12.000 16.000 20.000 25.000

50.00 56.00 60.00 63.00 80.00

2.00 2.80 3.20 3.50 3.80

AVAILABILITY

3 3 3 3 3

• • • • • 82º also available on request

• Australian stock item

164

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

90º FRONT/BACK DEBURRER (4-FLUTED) 495

Standard

COUNTERSINKS & COUNTERBORES

Guhring no.

Guhring std.

Tool material

Carbide

Surface Cutting direction

right-hand

d1 d3

l3 l1

6.0 8.0 10.0 12.0

6.0 6.0 6.0 6.0

1.2 1.6 2.0 2.4

3.9 -

100.0 100.0 100.0 100.0

3.5 4.7 6.5 8.3

15.0 -

0.5 0.5 0.5 0.5

AVAILABILITY

4 4 4 4

• • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

165

COUNTERBORES WITH FIXED PILOTS FOR FINE TOLERANCES COUNTERSINKS & COUNTERBORES

Guhring no.

482

Standard

DIN 373

Tool material

HSS

Surface Cutting direction

right-hand

l2 l1

for

thread

2.200 2.500 3.800 4.300 5.500 6.000 6.500 8.000 10.000 11.000 15.000 18.000 20.000

1.100 1.300 1.800 2.200 2.800 3.200 3.700 4.300 5.300 6.400 8.400 10.500 13.000

2.200 2.500 3.800 4.300 5.000 5.000 5.000 5.000 8.000 8.000 12.500 12.500 12.500

45.00 45.00 56.00 56.00 71.00 71.00 71.00 71.00 80.00 80.00 100.00 100.00 100.00

7.00 7.00 10.00 10.00 14.00 14.00 14.00 14.00 18.00 18.00 22.00 22.00 22.00

M1 M1,2 M1,7 M2 M2,6 M3 M3,5 M4 M5 M6 M8 M10 M12

AVAILABILITY

2 2 2 2 3 3 3 3 3 3 3 3 3

m m m

• m

• • • • • •

• Australian stock item

166

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

COUNTERBORES WITH FIXED PILOTS FOR FINE TOLERANCES (TAPER SHANK) 485

Standard

COUNTERSINKS & COUNTERBORES

Guhring no.

Guhring std.

Tool material

HSS

Surface Cutting direction

right-hand

l2 l1

26.000 30.000 33.000 40.000

17.00 19.00 21.00 25.00

MK 3 3 3 3

for

thread

192.00 192.00 204.00 204.00

35.00 35.00 40.00 40.00

M16 M18 M20 M24

AVAILABILITY

3 3 3 3

• • • •

• Australian stock item

bright

steam tempered

nitrided lands

TiN

TiAlN

German stock item

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

167

CUTTING SPEED RECOMMENDATION COUNTERSINKS & COUNTERBORES

Guhring no. Standard/DIN Feed column no.

Countersink Ø mm

2.00 2.50 3.15 4.00 5.00 6.30 8.00 10.00 12.50 16.00 20.00 25.00 31.50 40.00 50.00 63.00 80.00 100.00

0.03 0.03 0.03 0.04 0.04 0.04 0.05 0.06 0.06 0.07 0.08 0.09 0.12 0.14 0.17 0.20 0.23 0.25

0.04 0.05 0.05 0.06 0.07 0.07 0.08 0.09 0.10 0.11 0.13 0.15 0.17 0.21 0.24 0.27 0.30 0.30

0.06 0.07 0.08 0.09 0.10 0.12 0.13 0.14 0.15 0.17 0.18 0.21 0.24 0.28 0.31 0.33 0.35 0.35

0.10 0.13 0.15 0.17 0.18 0.19 0.20 0.22 0.23 0.26 0.28 0.30 0.36 0.40 0.42 0.44 0.46 0.46

0.13 0.16 0.20 0.22 0.23 0.24 0.25 0.26 0.28 0.31 0.33 0.38 0.42 0.46 0.48 0.50 0.52 0.52

Tool material Surface finish

f (mm/rev.)

0.08 0.10 0.11 0.13 0.14 0.15 0.16 0.17 0.19 0.21 0.23 0.26 0.30 0.34 0.36 0.38 0.40 0.40

Angle of taper Type/Form

Coolant: Air Neat oil Soluble oil Tensile strength Hardness MPa (N/mm2)

Material group

Material examples

Common structural steels

≤500 ≤1000 ≤850 ≤1000 ≤700 ≤850 ≤1000 ≤1000 ≤1400 ≤850 ≤1000 ≤1400 ≤1000 ≤1400 ≤850 ≤1400 ≤1400

≤2000

Free-cutting steels Unalloyed heat-treatable steels

Alloyed heat-treatable steels Unalloyed case hardened steels Alloyed case hardened steels Nitriding steels Tool steels High speed steels Spring steels Stainless steels, sulphured austenitic martensitic Hardened steels Special alloys Cast iron Spheroidal graphite iron and malleable cast iron Chilled cast iron Ti and Ti-alloys Aluminium and Al-alloys Al wrought alloys Al cast alloys ≤ 10 % Si ≤ 24 % Si Magnesium alloys Copper, low-alloyed Brass, short-chipping long-chipping Bronze, short-chipping Bronze, long-chipping Duroplastics Thermoplastics New cast materials CGI New cast materials ADI Kevlar Glass, carbon concent. plastics

168

bright

steam tempered

nitrided lands

TiN

Coolant

≤350 HB ≤900 ≤1100 ≤1500 ≤48 HRC ≤66 HRC ≤240 ≤350 ≤240 ≤350 ≤350

HB HB HB HB HB

≤850 ≤1400 ≤400 ≤650 ≤600 ≤600 ≤400 ≤500 ≤600 ≤600 ≤600 ≤850 ≤850 ≤1000 ≤150 ≤100 ≤220 HB ≤300 HB ≤1000 ≤1400 ≤1000 ≤1000

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

COUNTERSINKS

COUNTERBORES

472

476

477

482

485

334

335

373

G.S

HSS

60ยบ

90ยบ

with fixed pilot

pilot

Benefit from the advantages of GSS 2000

COUNTERSINKS & COUNTERBORES

CUTTING SPEED RECOMMENDATION

high performance spindle, hence quick change time overheating protection for holder automatic mode possible error detection heating programs maximum rigidity

Vc Feed col. m/min no.

Vc m/min

Feed col. no.

Vc m/min

32 30 32 30 32 30 20 15 12 25 15 10 15 12 17 15 15 10 16 12 14

85 85 85 85 85 85 84 84 84 85 84 84 85 84 84 84 84 84 84 84 84

32 30 32 30 32 30 20 15 12 25 15 10 15 12 17 15 15 10 16 12 14

86 85 86 85 85 85 85 85 84 86 85 84 85 84 85 84 84 84 85 84 84

32 30 32 30 32 30 20 15 12 25 15 10 15 12 17 15 15 10 16 12 14

85 85 85 85 85 85 84 84 84 85 84 84 85 84 84 84 84 84 84 84 84

8 25 16 22 20 8 15 10 90 70 40 30 100 60 80 50 30 26 24 20 30 40 25 16

84 85 84 84 84 84 85 85 85 86 85 85 86 84 85 85 86 86 86 86 84 85 85 84

8 25 16 22 20 8 15 10 90 70 40 30 100 60 80 50 30 26 24 20 30 40 25 16

84 85 85 85 84 84 86 85 86 86 86 86 86 85 85 85 86 86 86 86 85 85 85 84

8 25 16 22 20 8 15 10 90 70 40 30 100 60 80 50 30 26 24 20 30 40 25 16

84 85 84 84 84 84 85 85 85 86 85 85 86 84 85 85 86 86 86 86 84 85 85 84

bright

steam tempered

highest cutting rates

Feed col. no.

nitrided lands

TiN

TiAlN

C TiCN

FIRE/nanoFIRE

TiAlN SuperA

169

GUHRING TOOL SETS GUHRING TOOL SET

170

Tool illustratior

Set consists of:

Standard

Type

Tool material

twist drills

DIN 338

HSS

Surface

>Ø 2,36

Diameter range

Guhring no.

Piece per set

ø1.0 ø10.0

205 0,000

91 (In increments of 0.1mm)

ø1.0 ø10.0

9651 0,005

91 (In increments of 0.1 mm)

ø1.00 ø13.00

8901 0,014

25 (In increments of 0.5 mm)

ø1.00 ø13.00

234 6,014

25 (In increments of 0.5 mm)

twist drills

DIN 338

HSS

twist drills

DIN 338

HSS

twist drills

DIN 338

HSS

twist drills

DIN 338

HSS

1/16 inch 1/2 inch

201 0,021

29 (In increments of 1/64 inch)

twist drills

DIN 338

HSS

1/16 inch 1/2 inch

234 0,021

29 (In increments of 1/64 inch)

90º NC-spotting drills

Guhring std.

HSS

ø6 ø12

557 0,001

4 (In increments of 2.00 mm)

90º NC-spotting drills

Guhring std.

HSS

ø6 ø12

557 0,002

4 (In increments of 2.00 mm)

head coated

>Ø 2,36

head coated

COUNTERSINKS & COUNTERBORES

Tool illustratior

Standard

90º NC-spotting drills

Guhring std.

Carbide

90º NC-spotting drills

Guhring std.

Carbide

2 flute slot drills

DIN 6528

Carbide

3 flute end mills

DIN 6527L

Carbide

4 flute end mills

DIN 6527L

Carbide

DIN 2184-1

DIN 376

gun taps, twist drills

spiral taps, twist drills

gun taps, twist drills

Type

Tool material

Set consists of:

Guhring no.

Piece per set

ø6 - ø12

723 0,001

4 (In increments of 2.00 mm)

ø6 - ø12

723 0,002

4 (In increments of 2.00 mm)

ø6 - ø12

3676 0,001

4 (In increments of 2.00 mm)

Surface

Diameter range

ø6 - ø12

3560 0,001

4 (In increments of 2.00 mm)

ø6 - ø12

3799 1,000

4 (In increments of 2.00 mm)

HSS-E-PM

M3 - M12 ø2.5 - ø10.2

5559 0,010

14 (7 taps and 7 drills)

HSS-E

M3 - M12 ø2.5 - ø10.2

5553 0,020

14 (7 taps and 7 drills)

HSS-E

M3 - M12 ø2.5 - ø10.2

5696 17,100

14 (7 taps and 7 drills)

GUHRING TOOL SET

GUHRING TOOL SETS

171

GUHRING TOOL SETS GUHRING TOOL SET

Tool illustratior

Standard

Type

Tool material

Diameter range

Guhring no.

Piece per set

DIN 376

HSS-E

M3 - M12 ø2.5 - ø10.2

5698 17,100

14 (7 taps and 7 drills)

gun taps

DIN 371

HSS-E

M5 - M12

5695 17,000

spiral taps

DIN 371

HSS-E

M5 - M12

5697 17,000

90º countersinks

DIN 335

HSS

ø6.3 - ø20.5

498 8,000

90º countersinks

DIN 335

HSS

ø6.3 - ø20.5

498 7,000

counterbores

DIN 373

HSS

M3 - M12

482 0,200

HSS-E

M3 - M10 ø2.5 - 8.5 ø6.3 / 12.4

8903 2,000

14 (6 taps, 6 drills and 2 countersinks)

HSS-E

M3 - M10 ø2.5 - 8.5 ø6.3 / 12.4

8903 1,000

14 (6 taps, 6 drills and 2 countersinks)

Set consists of:

spiral taps twist drills

172

gun taps, twist drills, 90º countersinks

in-house std.

spiral taps, twist drills, 90º countersinks

in-house std.

Surface

PRODUCTION & SERVICE

QUOTATION

FIRE ICE TiN

RECOATING IN-HOUSE

HI GH QUALITY C ARBIDE

TAPERED END MILLS

PVD COATING

END MILLS REAMERS

SERVICING RECYCLING

SPECIAL TOOLS STEP DRILLS DELIVERING

REGRINDING

PRODUCTION & SERVICE

173

SPECIAL TOOLS & RE-GRINDING SERVICE PRODUCTION & SERVICE Guhring Australia has become a one-stop shop for offering a range of high performance cutting tool solutions, including a local Production and Service Division that manufacturers solid carbide special tools in-house, from step drills and reamers to complex form tools and milling cutters. The local grinding division also offers a comprehensive resharpening service for both original Guhring tools as well as competitor products. The division is also equipped with its own in-house PVD coating centre for depositing a range of advanced ceramic coatings.

“THE SHORTEST DELIVERY TIMES FOR THE HIGHEST QUALITY SPECIAL TOOLS WITH PVD COATING!” Guhring Australia draws on the wealth of knowledge and experience of our parent company in Germany, while at the same time offers rapid delivery of custom-made special tools at highly competitive prices, complete with in-house coating facilities. If the need arises our highly experienced local team can deliver special coated carbide cutting tools within 48 hours. No other cutting tool company can offer such a rapid and complete solution in Australia.

High quality carbide Guhring Australia uses only German-made Guhring carbide rods for the in-house production of special tools. A large range of carbide rods are kept in stock to meet the increasing demands from the machine-tool industry for the highest possible performance from specialist cutting tools.

Re-grinding Worn tools don’t belong on the scrap heap. Regrinding can offer a highly cost effective solution to reduce overall tooling costs by regrinding and recoating tools to near asnew condition. The service is not only for Guhring tools but also competitor products.

Get quotation now!! Quotation within 24 hours! Tool delivery within 3 weeks! Fill out one of the special tool templates found on page 176 to page 179 and email us on service@guhring.com.au

174

For special applications it is desirable to increase the wear resistance of tools and improve the coefficient of friction between the tool and the workpiece material using special PVD coatings. Guhring offer a range of advanced wear-resistant coatings from an in-house PVD coating facility.

S-coating or TiN coating (Titanium nitride) Physical appearance: golden colour. Well proven, cost efficient all-round coating. Generally achieving performance increases. Surpassed in certain cases by other more advanced coatings.

Super A-coating or AITiN-coating (Aluminium titanium nitride) Physical appearance: Black-violet colour. Guhring’s wellproven A-coat has undergone continuous development by optimising the structural, chemical and mechanical properties of the coating. The result is the Super A-coating that has extremely high hot hardness, very good oxidisation resistance as well as excellent coating adhesion. This coating is suitable for the machining of difficult-to-machine materials such as titanium-alloys, Inconel and hardened steels as well as for hard machining (>52HRC ) and HSC.

at least twice the performance of TiN. Combines the advatages if TiN, TiAIN and TiCN. Excellent, near “fire resistant” heat resistance. High toughness.

PRODUCTION & SERVICE

IN-HOUSE PVD COATING

ICE coating (AICrN-coat) Physical appearance: metallic grey. The coating is specially adapted to satisfy the demands of high temperature and MQL machining applications. Our ICE-coat is based on aluminium chromium nitride (AICrN) and possesses an extremely high oxidation resistance and hot hardness thanks to the high chromium content. The result is a high wear resistance and productivity in difficult to machine applications. Z

ZENIT coating

Physical appearance: pale yellow colour. The Zenit coating is specifically designed for non-ferrous applications, especially for milling of aerospace grade titanium alloys.

FIRE coating Physical appearance: violet-black colour. Multilayer TiAINcoating with a graded structure. All-round coating achieveing

S-coating

TiN

Super-A Coating TiAlN

FIRE Coating TiN/TiAlN

ICE Coating TiAlCrN

Zenit Coating Z ZrN/AlTiN

Colour

Gold

Grey Violet

Black Violet

Metallic Silver

Light Gold

Coating process

Physical Vapour Deposition

Layer structure

Monolayer

Graded Multilayer

Nanolayer

Thickness [µm]

1.5 – 3.0

2.0 – 4.0

2.0 – 3.0

Hardness [HV 5g]

2300

3400

3300

3500

3000

Friction coefficient

0.4

0.6

0.3

Deposition temp. [°C]

400 – 500°C

Maximum operating temperature [°C]

600°C

900°C

800°C

1000°C

800°C

Applications

General

High Performance

Workpiece materials

General

Hardened steels Cast irons AlSi alloys

Hardened steels Cast irons, AlSi and Titanium alloys

Non ferrous, stainless steel

175

QUESTIONNAIRE SPECIAL STEP DRILLS (MANUFACTURED IN AUSTRALIA) PRODUCTION & SERVICE

Dimensions º

Point angle

Nominal-ø see 3.

Step angle Shank-ø

Step-ø see 2.

Step length mm

Shank length ±

Flute length mm

Overall length mm

Step-ø

Internal coolant

Yes

Coating

Bright

TiN-coated

Quantities to quote: (For enquiry)

pcs

Nominal-ø

ICE coated

pcs

FIRE-coated

Zenit-coated

pcs

Company

Name

Street

Phone

Date

Suburb and postcode

FAX

Signature

6 Jacks Road, Oakleigh South VIC 3167 FAX: (03) 9948 4699 E-MAIL: service@guhring.com.au 176

This drawing is the property of Guhring oHG. It is not allowed to copy it partially or completely, to publish it, or to use or communicate it for the purpose of competition without authorization.

QUESTIONNAIRE SPECIAL END MILLS

Dimensions

Nominal-ø

Shank-ø

PRODUCTION & SERVICE

(MANUFACTURED IN AUSTRALIA)

Chamfer/radius see 2

Neck-ø

Cut length mm

Shank length

Overall length mm

Chamfer/ radius

Helix angle

End cutting

Yes

Coating

Bright

TiN-coated

Quantities to quote: (For enquiry)

Chamfer

Corner radius

pcs

Number of flutes

Internal coolant

ICE coated

pcs

Ball nose

Yes

FIRE-coated

Zenit-coated

pcs

Company

Name

Street

Phone

Date

Suburb and postcode

FAX

Signature

6 Jacks Road, Oakleigh South VIC 3167 FAX: (03) 9948 4699 E-MAIL: service@guhring.com.au This drawing is the property of Guhring oHG. It is not allowed to copy it partially or completely, to publish it, or to use or communicate it for the purpose of competition without authorization.

177

QUESTIONNAIRE SPECIAL TAPERED END MILLS (MANUFACTURED IN AUSTRALIA)

Dimensions

Nominal-ø

PRODUCTION & SERVICE

Shank-ø

Lead-ø see 3.

Chamfer/radius see 2

Taper Angle

Cut length

Shank length

Overall length mm

Chamfer/ radius

Lead-ø

End cutting

Yes

Coating

Bright

TiN-coated

Quantities to quote: (For enquiry)

Chamfer

Corner radius

pcs

Helix angle

Internal coolant

ICE coated

pcs

Ball nose

Number of flutes

Yes

FIRE-coated

Zenit-coated

pcs

Company

Name

Street

Phone

Date

Suburb and postcode

FAX

Signature

6 Jacks Road, Oakleigh South VIC 3167 FAX: (03) 9948 4699 E-MAIL: service@guhring.com.au 178

This drawing is the property of Guhring oHG. It is not allowed to copy it partially or completely, to publish it, or to use or communicate it for the purpose of competition without authorization.

QUESTIONNAIRE SPECIAL REAMERS

Dimensions

Shank-ø

Nominal-ø

PRODUCTION & SERVICE

(MANUFACTURED IN AUSTRALIA)

Cut length

Corner chamfer see 2

Shank length

Neck-ø mm

Flute length mm

Overall length mm

Chamfer/ radius

Helix angle

Internal coolant

Yes

Coating

Bright

TiN-coated

Quantities to quote: (For enquiry)

Chamfer

pcs

Number of flutes

ICE coated

pcs

FIRE-coated

Zenit-coated

pcs

Company

Name

Street

Phone

Date

Suburb and postcode

FAX

Signature

179

RECYCLING CARBIDE PRODUCTION & SERVICE

Guhring recycling carbide protects the environment and conserves resources. Throw away high quality used carbide? Itâ&#x20AC;&#x2122;s just too valuable. We offer you an environment-friendly and economically attractive solution: Our Recycling Carbide Tools. Thanks to our own carbide technology we are able to recycle this valuable raw material. By sending us your used carbide tools, you help preserve and protect the environment and ensure that these products are recycled responsibly. You also earn extra money. Please fill out the form below or call us on 1800-639-991 to obtain the latest price.

Company

Address

Name

Suburb

Postcode

Telephone

Fax

E-Mail

Approx. Weight of used carbide tools (e.g. carbide inserts, drills, taps, end mills, reamers, and milling cutters) Kg 6 Jacks Road, Oakleigh South VIC 3167 FAX: (03) 9948 4699 E-MAIL: sales@guhring.com.au 180

TECHNICAL INFORMATION

FIRE ICE TiN QUOTATION IN-HOUSE

TAPERED END MILLS RECOATING

PVD COATING

END MILLS

H IGH QUALITY C ARBIDE

SERVICING

SPECIAL TOOLING

RECYCLING

TECHNICAL INFORMATION

DELIVERING REGRINDING

181

DEFINITIONS, DIMENSIONS AND ANGLES (DIN ISO 5419, EDITION 06/98)

flute

tang (to DIN 1809) shank Ø

land

drill Ø

TECHNICAL INFORMATION

Twist drills with straight / Morse taper shank

tang

axis

flute length

point angle

helix angle taper shank

pitch

straight shank

body total length

Cutting portion point cutting lip length

Cross section A-A cutting wedge

lead. edge of land flute

flank

minor flank

chisel edge

land

body

A chisel edge corner

heel

face

cutting lip

face

flank

A land width

heel options detail X

chisel edge angle body clearance

drill Ø

ick

cle

ar an

corner

de-burred

body clear.

chamfered

radiused

flute land

core thickness

gle

γf rake angle

working angle

γfe working front rake angle

resu ltan tc ut tin g

drill angle

βγffe side wedge angle

γf

diameter d

feed f αβfe f effective side clearance angle αf side clearance angle

cutting direction vc direction of cutting motion ve vc

(d.π)

selected edge point (corner)

αfe αf

cutting travel lc per revolution ve (d.π)

feed direction vf

Special point geometry to DIN 1412 (extract; edition 03/01) Form A Thinned chisel edge

Form D Point ground for cast iron

Form B Thinned chisel edge with corrected cutting lips

Form E Brad point (center point)

Form C Split point

182

MANUFACTURING TOLERANCES AND CONVERSION TABLE

tolerance range mm

TECHNICAL INFORMATION

Twist drill manufacturing tolerances to DIN ISO 286, part 2 Reference to other relevant standards

diameter (nominal size) up to and incl. mm

0.38 … 0.60

0.95

3.00

6.00

10.00

18.00

DIN 228

30.00

50.00

80.00

120.00

Part 1 machine tapers; Morse tapers and metric tapers, taper shank

DIN 1414-1 Directions for design and use for high speed steel twist drills DIN 6580

Definitions of the metal-cutting industry; motions and geometry of the cutting process

DIN 6581

Definitions of the metal-cutting industry; Cutting portion reference systems and angles

The standard descriptions above are given with the permission from the German Standards Institute (Deutsches Institut für Normung). The most recent editions of the standard sheets apply and are available in DIN A 4 format from BeuthVerlag GmbH, D-10787 Berlin.

* If you need tolerances other than ISO h8 please let us know. Additional charges for closer diameter tolerance see additional charges at the end of chapter Drilling Tools.

Conversion table inch - millimetre (From 1/64 to 11 63/64) Fraction 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 1/64 78 77 76 75 74 73 72 71 70 69 68 1/32 67

inch

0.10 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.25 0.26 0.27 0.27 0.28 0.29 0.29 0.30 0.30 0.32 0.32 0.33 0.34 0.37 0.40 0.41 0.46 0.50 0.51 0.53 0.57 0.60 0.61 0.64 0.66 0.70 0.71 0.74 0.75 0.79 0.79 0.80 0.81

0.0039 0.0059 0.0063 0.0067 0.0071 0.0075 0.0079 0.0083 0.0087 0.0091 0.0095 0.0098 0.0100 0.0102 0.0105 0.0106 0.0110 0.0114 0.0115 0.0118 0.0120 0.0125 0.0126 0.0130 0.0135 0.0145 0.0156 0.0160 0.0180 0.0197 0.0200 0.0210 0.0225 0.0236 0.0240 0.0250 0.0260 0.0276 0.0280 0.0292 0.0295 0.0310 0.0313 0.0315 0.0320

Fraction 66 65 64 63 62 61 60 59 58 57 56 3/64

55 54

53 1/16 52 51 50 49 48 5/64 47 46 45 44 43 42

inch

0.84 0.89 0.90 0.91 0.94 0.97 0.99 1.00 1.02 1.04 1.07 1.09 1.18 1.19 1.20 1.25 1.30 1.32 1.40 1.45 1.50 1.51 1.55 1.59 1.60 1.61 1.65 1.70 1.75 1.78 1.80 1.85 1.90 1.93 1.95 1.98 1.99 2.00 2.05 2.06 2.08 2.15 2.18 2.26 2.37

0.0330 0.0350 0.0354 0.0360 0.0370 0.0380 0.0390 0.0394 0.0400 0.0410 0.0420 0.0430 0.0465 0.0469 0.0472 0.0492 0.0512 0.0520 0.0550 0.0571 0.0591 0.0595 0.0610 0.0625 0.0630 0.0635 0.0650 0.0670 0.0689 0.0700 0.0709 0.0730 0.0748 0.0760 0.0768 0.0781 0.0785 0.0787 0.0807 0.0810 0.0820 0.0846 0.0860 0.0890 0.0935

Fraction 3/32 41 40 39 38 37 36 7/64 35 34 33 32 31 1/8 30 29 28 9/64 27 26 25 24 23 5/32 22 21 20 19 18 11/64 17 16 15 14 13 3/16 12 11

inch

Fraction

inch

2.38 2.44 2.50 2.53 2.58 2.64 2.71 2.78 2.79 2.82 2.87 2.90 2.95 3.00 3.05 3.18 3.26 3.30 3.45 3.50 3.57 3.57 3.66 3.73 3.75 3.80 3.86 3.91 3.97 3.99 4.00 4.04 4.09 4.20 4.22 4.31 4.37 4.39 4.50 4.57 4.62 4.70 4.76 4.80 4.85

0.0938 0.0960 0.0980 0.0995 0.1015 0.1040 0.1065 0.1094 0.1100 0.1110 0.1130 0.1142 0.1160 0.1181 0.1200 0.1250 0.1285 0.1299 0.1360 0.1378 0.1405 0.1406 0.1440 0.1470 0.1476 0.1495 0.1520 0.1540 0.1562 0.1570 0.1575 0.1590 0.1610 0.1654 0.1660 0.1695 0.1719 0.1730 0.1770 0.1800 0.1820 0.1850 0.1875 0.1890 0.1910

10 9 8 7 13/64 6 5

4.91 4.98 5.00 5.05 5.11 5.16 5.18 5.22 5.25 5.31 5.41 5.50 5.56 5.61 5.79 5.94 5.95 6.00 6.05 6.15 6.25 6.35 6.35 6.50 6.53 6.63 6.75 6.75 6.76 6.91 7.00 7.04 7.14 7.14 7.37 7.49 7.50 7.54 7.67 7.75 7.94 8.00 8.03 8.20 8.33

0.1935 0.1960 0.1968 0.1990 0.2010 0.2031 0.2040 0.2055 0.2067 0.2090 0.2130 0.2165 0.2188 0.2210 0.2280 0.2340 0.2344 0.2362 0.2380 0.2420 0.2460 0.2500 0.2500 0.2559 0.2570 0.2610 0.2656 0.2657 0.2660 0.2720 0.2756 0.2772 0.2810 0.2812 0.2900 0.2949 0.2953 0.2969 0.3020 0.3051 0.3125 0.3150 0.3160 0.3230 0.3281

4 3 7/32 2 1 A 15/64 B C D 1/4 E F G 17/64 H I J K 9/32 L M 19/64 N 5/16 O P 21/64

Fraction Q R 11/32 S T 23/64 U 3/8 V W 25/64 X Y 13/32 Z 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8

inch

Fraction

inch

8.43 8.50 8.61 8.73 8.75 8.84 9.00 9.09 9.13 9.35 9.50 9.53 9.56 9.80 9.92 10.00 10.08 10.26 10.32 10.49 10.50 10.72 11.00 11.11 11.50 11.51 11.91 12.00 12.30 12.50 12.70 13.00 13.10 13.49 13.50 13.89 14.00 14.29 14.50 14.68 15.00 15.08 15.48 15.50 15.88

0.3320 0.3346 0.3390 0.3438 0.3445 0.3480 0.3543 0.3580 0.3594 0.3680 0.3740 0.3750 0.3770 0.3860 0.3906 0.3937 0.3970 0.4040 0.4062 0.4130 0.4134 0.4219 0.4331 0.4375 0.4528 0.4531 0.4688 0.4724 0.4844 0.4921 0.5000 0.5118 0.5156 0.5312 0.5315 0.5469 0.5512 0.5625 0.5709 0.5781 0.5906 0.5938 0.6094 0.6102 0.6250

41/64

16.00 16.27 16.50 16.67 17.00 17.07 17.46 17.50 17.86 18.00 18.26 18.50 18.65 19.00 19.05 19.45 19.50 19.84 20.00 20.24 20.50 20.64 21.00 21.03 21.43 21.50 21.84 22.00 22.23 22.50 22.62 23.00 23.02 23.42 23.50 23.81 24.00 24.21 24.50 24.61 25.00 25.00 25.40

0.6299 0.6406 0.6496 0.6562 0.6693 0.6719 0.6875 0.6890 0.7031 0.7087 0.7188 0.7283 0.7344 0.7480 0.7500 0.7656 0.7677 0.7812 0.7874 0.7969 0.8071 0.8125 0.8268 0.8281 0.8438 0.8465 0.8594 0.8661 0.8750 0.8858 0.8906 0.9055 0.9062 0.9219 0.9252 0.9375 0.9449 0.9531 0.9646 0.9688 0.9843 0.9844 1.0000

21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1

183

CHAMFER FORMS, SELECTION AND APPLICATION TECHNICAL INFORMATION

Chamfer forms to DIN 2197 6…8 threads

Form A

3.5…5.5 threads

Form B

2…3 threads

Form C

3.5…5 threads

Form D

long, 6 - 8 threads for short through holes

medium, 3.5 - 5.5 threads, with spiral point, for all through holes and deep tapping holes in medium and longchipping materials

short, 2 - 3 threads for blind holes and generally for aluminium, grey cast iron and brass

medium, 3.5 - 5 threads for short through holes

Form E

1.5…2 threads

extremely short, 1.5-2 threads, for blind holes with little run-out depth.

Form F

1…1.5 threads

extremely short, 1-1.5 threads, for blind holes with little run-out depth. Avoid use if possible.

Types of centres (standard, to DIN 2197/DIN 2175) solid cone 1

4 solid cone

on cutting section

stepped cone 2

on shank

5 chamfer

internal centre (form A or R to DIN 322 3 acc. to manufact. specification)

internal centre 6 (form A or R to DIN 322 acc. to manufact. specification)

Centre on cutting section Thread dia. range mm

with chamfer forms A, C, D, E

with chamfer form B

Centre on shank

≤ 4.2

456

> 4.2 … 5.6

456

> 5.6 … 10.0

123

456

> 10.0

Coolant duct geometries

axial coolant delivery with axial coolant duct exit

184

axial coolant delivery with radial coolant duct exit in the flutes at the chamfer

For thread cutting

For thread forming

Std. ISO metric threads

M M M M M M M M M M M M M M M M M M M

1 1.1 1.2 1.4 1.6 1.8 2 2.2 2.5 3 3.5 4 4.5 5 6 7 8 9 10

0.25 0.25 0.25 0.30 0.35 0.35 0.40 0.45 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.00 1.25 1.25 1.50

tapping size hole Ø mm

0.75 0.85 0.95 1.10 1.25 1.45 1.60 1.75 2.05 2.50 2.90 3.30 3.70 4.20 5.00 6.00 6.80 7.80 8.50

nom. Ø

M M M M M M M M M M M M M M M M M M

pitch P

11 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56

ISO metric fine threads

/8 /4 7 /8 5 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2

1.55 1.85 2.10 2.35 2.65 2.85 3.50 3.90 4.50 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 28.00 30.75 34.00 39.50 45.00

Nr. 1 Nr. 2 Nr. 3 Nr. 4 Nr. 5 Nr. 6 Nr. 8 Nr. 10 Nr. 12 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16 /8 /4 7 /8 5 3

1 1 1/8 1 1/4 1 3/8 1 1/2

M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M 2.2 M 2.5 M3 M 3.5 M4 M 4.5 M5 M6 M7 M8 M9 M 10 M 11 M 12 M 14 M 16 M 18 M 20 M 22 M 24 M 27 M 30 M 33 M 36 M 39 M 42

1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50 4.50 5.00 5.00 5.50

9.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 24.00 26.50 29.50 32.00 35.00 37.50 40.50 43.00 47.00 50.50

M 2.5 M 3.0 M 3.5 M 4.0 M 4.5 M 5.0 M 5.5 M 6.0 M 7.0 M 8.0 M 8.0 M 8.0 M 9.0 M 9.0 M 10 M 10 M 10 M 11 M 11 M 12 M 12 M 12 M 14 M 14 M 14 M 15 M 15 M 16 M 16 M 16 M 17 M 17

M 18 M 18 M 20 M 20 M 20 M 22 M 22 M 22 M 24 M 24 M 24 M 25 M 25 M 25 M 27 M 27 M 27 M 28 M 28 M 28 M 30 M 30 M 30 M 30 M 32 M 32 M 33 M 33 M 33 M 35 M 36

UNF threads

64 56 48 40 40 32 32 24 24 20 18 16 14 13 12 11 10 9 8 7 7 6 6 5 4.5

17.00 16.50 19.00 18.50 18.00 21.00 20.50 20.00 23.00 22.50 22.00 24.00 23.50 23.00 26.00 25.50 25.00 27.00 26.50 26.00 29.00 28.50 28.00 27.00 30.50 30.00 31.50 31.00 30.00 33.50 34.50

nom. threads tapping Ø size hole Ø per inch mm

x 1.00 x 1.50 x 1.00 x 1.50 x 2.00 x 1.00 x 1.50 x 2.00 x 1.00 x 1.50 x 2.00 x 1.00 x 1.50 x 2.00 x 1.00 x 1.50 x 2.00 x 1.00 x 1.50 x 2.00 x 1.00 x 1.50 x 2.00 x 3.00 x 1.50 x 2.00 x 1.50 x 2.00 x 3.00 x 1.50 x 1.50

nom. x pitch Ø P

UNC threads

1 2 3 4 5 6 8 10 12 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16

nom. Ø

nom. x pitch tapping Ø P size hole Ø mm mm

nom. threads tapping Ø size hole Ø per inch mm

Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr. Nr.

72 64 56 48 44 40 36 32 28 28 24 24 20 20 18 18 16 14 12 12 12 12 12

1.55 1.85 2.15 2.40 2.70 2.95 3.50 4.10 4.60 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.40 23.25 26.50 29.50 32.75 36.00

x 0.35 x 0.35 x 0.35 x 0.50 x 0.50 x 0.50 x 0.50 x 0.75 x 0.75 x 0.50 x 0.75 x 1.00 x 0.75 x 1.00 x 0.75 x 1.00 x 1.25 x 0.75 x 1.00 x 1.00 x 1.25 x 1.50 x 1.00 x 1.25 x 1.50 x 1.00 x 1.50 x 1.00 x 1.25 x 1.50 x 1.00 x 1.50

2.15 2.65 3.15 3.50 4.00 4.50 5.00 5.20 6.20 7.50 7.20 7.00 8.20 8.00 9.20 9.00 8.80 10.20 10.00 11.00 10.80 10.50 13.00 12.80 12.50 14.00 13.50 15.00 14.80 14.50 16.00 15.50

BSP threads

nom. Ø

G 1/16

6.80

G 7/8

28.25

inch

G 1/8

8.80

30.75

G 1/4

11.80

G 11/8

35.50

G 3/8

15.25

G 11/4

39.50

G 1/2

19.00

G 11/2

45.25

G 5/8

21.00

G 13/4

51.00

G 3/4

24.50

57.00

W 5/32 W 3/16 W 7/32 W 1/4 W 5/16 W 3/8 W 7/16 W 1/2 W 9/16

1.20 1.80 2.50 3.20 3.60 4.50 5.10 6.50 7.90 9.20 10.50 12.00

nom. threads tapping Ø size hole Ø inch per inch mm

W 5/8 W 3/4 W 7/8 W1 W 1 1/8 W 1 1/4 W 1 3/8 W 1 1/2 W 1 5/8 W 1 3/4 W2

0.25 0.25 0.30 0.35 0.35 0.35 0.40 0.45 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.00 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50

0.90 1.10 1.28 1.46 1.56 1.66 1.85 2.00 2.30 2.80 3.25 3.70 4.20 4.65 5.55 6.55 7.40 8.40 9.30 10.30 11.20 13.10 15.10 16.90 18.90 20.90 22.70 25.70 28.50 31.50 34.30 37.30 40.10

M 2.5 M3 M4 M4 M5 M 5.5 M6 M7 M8 M8 M9 M9 M 10 M 10 M 10 M 11 M 11 M 12 M 12 M 12 M 14 M 14

pitch

tapp. size hole Ø per inch mm

G 1/16 G 1/8 G 1/4 G 3/8 G 1/2 G 5/8 G 3/4 G 7/8 G1 G 11/4

11 10 9 8 7 7 6 6 5 5 4.5

13.50 16.25 19.25 22.00 24.50 27.75 30.50 33.50 35.50 39.00 44.50

nom. Ø Version A (avoid if possible)

Version B

/16 /8 1 /4 1

1:16

W /32 W 1/8 3

60 48 40 32 24 24 20 18 16 14 12 12

nom. Ø

28 28 19 19 14 14 14 14 11 11

7.30 9.30 12.50 16.00 20.00 22.00 25.50 29.25 32.00 40.75

pitch

tapp. size hole Ø mm

nom. Ø

0.35 0.35 0.35 0.50 0.50 0.50 0.75 0.75 0.75 1.00 0.75 1.00 0.75 1.00 1.25 0.75 1.00 1.00 1.25 1.50 1.00 1.25

2.35 2.85 3.85 3.80 4.80 5.30 5.65 6.65 7.65 7.55 8.65 8.55 9.65 9.55 9.40 10.65 10.55 11.55 11.40 11.30 13.55 13.40

M 14 M 15 M 15 M 16 M 16 M 17 M 17 M 18 M 18 M 18 M 20 M 20 M 24 M 24 M 24 M 27 M 30 M 33 M 36 M 39 M 42

x x x x x x x x x x x x x x x x x x x x x x

tapp. size hole Ø per inch mm

Nr. 1 Nr. 2 Nr. 3 Nr. 4 Nr. 5 Nr. 6 Nr. 8 Nr. 10 Nr. 12 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16 5 /8 3 /4 7 /8 1

pitch

64 56 48 40 40 32 32 24 24 20 18 16 14 13 12 11 10 9 8

1.68 1.98 2.28 2.55 2.90 3.15 3.80 4.35 5.00 5.75 7.30 8.80 10.30 11.80 13.30 14.80 17.90 21.00 24.00

x x x x x x x x x x x x x x x x x x x x x

1.50 1.00 1.50 1.00 1.50 1.00 1.50 1.00 1.50 2.00 1.00 1.50 1.00 1.50 2.00 1.50 1.50 1.50 1.50 1.50 1.50

tapp. size hole Ø mm

13.30 14.55 14.30 15.55 15.30 16.55 16.30 17.55 17.30 17.10 19.55 19.30 23.55 23.30 23.10 26.30 29.30 32.30 35.30 38.30 41.30

UNF-threads

UNC-threads nom. Ø

pitch

nom. Ø

pitch per inch

Nr. 1 Nr. 2 Nr. 3 Nr. 4 Nr. 5 Nr. 6 Nr. 8 Nr. 10 Nr. 12 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16 5 /8 3 /4 7 /8 1

72 64 56 48 44 40 36 32 28 28 24 24 20 20 18 18 16 14 12

tapp. size hole Ø mm

1.70 2.00 2.30 2.60 2.90 3.20 3.85 4.45 5.10 5.95 7.45 9.05 10.55 12.10 13.65 15.25 18.35 21.40 24.45

NPT ANSI B 2.1 American tapered pipe thread 1:16

W 1/16

tapp. size hole Ø mm

BSP-threads

nom. threads tapping Ø size hole Ø inch per inch mm

ISO metric fine threads

pitch

nom. threads tapping Ø size hole Ø inch per inch mm

BSW threads nom. threads tapping Ø size hole Ø inch per inch mm

Std. ISO metric threads tapping size hole Ø mm

tapping size hole Ø mm

/8 /2 3 /4 3

pitch P

nom. Ø

TECHNICAL INFORMATION

TAPPING SIZE HOLES FOR THREAD CUTTING AND THREAD FORMING

1 1 1/4 1 1/2 2 2 1/2 3

threads tapp. size hole Ø tapp. size hole Ø cutting depth cutting depth per cylindrical (A) conical (B) ET BT (min) inch d1 D1 mm mm

- 27 - 27 - 18 - 18 - 14 - 14 - 11.5 - 11.5 - 11.5 - 11.5 - 8 - 8

6.15 8.40 11.10 14.30 17.90 23.30 29.00 37.70 43.70 55.60 66.30 82.30

6.39 8.74 11.36 14.80 18.32 23.67 29.69 38.45 44.52 56.56 67.62 83.52

9.29 9.32 13.52 13.83 18.07 18.55 22.29 22.80 22.80 23.20 31.75 33.74

10.7 10.8 15.6 16.0 20.8 21.3 25.6 26.1 26.1 26.5 36.3 38.5

Tapping size hole diameter tolerance zone for thread forming (to DIN 13, section 50) Due to the tensile strength it is not necessary to adhere to the tapping size hole diameter tolerance class 6H; tolerance class 7H satisfies the requirement that the flank coverage of external and internal threads should not fall below 0.32 x P. In addition, formed threads generally possess a higher tensile strength in comparison to cut threads thanks to an uninterrupted grain flow and subsequent work hardening.

185

TYPES ON MILLING CUTTERS AND THEIR BASIC APPLICATION RANGE TECHNICAL INFORMATION

Type N

Quick spiral with 30° helical pitch, suitable for finish milling structural, case hardened and heat-treatable steels as well as shortchipping non-ferrous metals and materials up to •·1200·N/mm²·tensile strength·applying high speed steel milling cutters •·1600·N/mm²·tensile strength·applying solid carbide milling cutters

Type NH

Quick spiral with high 45° helical pitch, suitable for super fine finishing high-alloyed materials and grey cast iron up to appr. •·1600·N/mm2·tensile strength

Type NF

Flat knuckle-type teeth/quick spiral, produces short chips and improved smoother surface quality in comparison to type NR or NRf. Suitable for milling standard materials up to appr. •·1200·N/mm²·tensile strength·applying high speed steel milling cutters •·1600·N/mm²·tensile strength applying solid carbide milling cutters

Type NR

Standard knuckle-type teeth, produces short chips and good chip evacuation. Suitable for milling standard materials up to appr. •·1000·N/mm²·tensile strength·applying high speed steel milling cutters •·1200·N/mm²·tensile strength·applying solid carbide milling cutters

Type NRf

Fine knuckle-type teeth, produces short chips and good chip evacuation. Better feed rates possible than with type NR. Suitable for milling materials with a high tensile strength up to appr. •·1400·N/mm²·tensile strength·applying high speed steel milling cutters •·1600·N/mm²·tensile strength applying solid carbide milling cutters

Type H

Quick spiral with high 55° helical pitch, suitable for super-fine finishing as well as HSC*machining of all hardened materials and chilled cast iron up to appr. •·62·HRC·hardness

Type HR

Fine knuckle-type teeth, produces short chips with good chip evacuation. Suitable for milling hardened materials as well as grey and chilled cast iron with up to appr. •·56 HRC hardness * High Speed Cutting

Type W

Quick spiral with 45° helical pitch, suitable for finish milling soft materials such as aluminium, Al-alloys and non-ferrous metals up to appr. •·600·N/mm2 tensile strength

Type WR

Coarse knuckle-type teeth, produces short chips with good chip evacuation. Suitable for milling aluminium. non-ferrous metals as well as soft steels up to appr. •·600·N/mm²·tensile strength.

30°

45°

Chip breakergeometry flattened coarse 30°

Chip breakergeometry coarse 30°

Chip breakergeometry fine 30°

55°

Chip breakergeometry fine 20°

45°

Chip breakergeometry extra coarse 30°

186

35°

RF 100U (type N)

35°/38° helix. Suitable for slotting, roughing and finishing steel, high-alloyed steel and hardened steel up to • 1600 N/mm² tensile strength (48 HRC)

RF 100 U (type NH) 3-fluted

41°/43°/45° helix. Suitable for slotting, roughing and finishing steel, high-alloyed steel and stainless steel up to • 1400 N/mm² tensile strength (44 HRC) 3-fluted suitable for extreme cutting depths

RF100 U/HF (type HF)

30°/32° helix and roughing and finishing geometry. Suitable for slotting and roughing with large cutting widths and depths in steel, high-alloyed steel and hardened steel up to • 1600 N/mm² tensile strength (48 HRC)

RF 100 F (type NH)

40°/42° helix. Suitable for slotting, roughing and finishing as well as HPC-milling/imachining tough steels as well as other long-chipping materials up to • 850 N/mm² tensile strength (25 HRC)

RF 100 VA (type N)

36°/38° helix. Suitable for slotting, roughing and finishing VA steels and stainless materials

38°

41°

43°

45°

32°

30°

40°

42°

36°

38°

TECHNICAL INFORMATION

MILLING CUTTER TYPES AND THEIR PRIMARY FIELDS OF APPLICATION

RF 100 VA/NF 36°/38° helix and roughing and finishing geometry. Suitable (type NF) for slotting and roughing VA steels and stainless materials 36°

39°

40°

29°

38°

35°

39°/40°/41° helix. Suitable for slotting, roughing and finishing aluminium and Al-alloys as well as long-chipping materials and non-ferrous metals

RF 100 A/WF (type WF)

29°/30°/31° helix and roughing and finishing geometry. Suitable for slotting and roughing aluminium and Al-alloys

RF 100 H (type H)

40°/42° helix and progressive core diameter. Suitable for roughing up to 1xD in materials up to 54 HRC, for finishing over the entire cutting edge length in materials over 63 HRC. With HPC strategy suitable for roughing materials > 63 HRC.

RF 100 Ti (type N)

35°/38° helix with corner radius. Suitable for slotting and roughing of titanium alloys as well as difficult-to-cut alloys

RF 100 SF (type NH)

44°/45°/46° helix. Suitable for HSC super fine finishing for semi-roughing with feed widths up to max. 0.3xD and HPC roughing over the entire cutting edge length for standard steels, c ast iron, non-ferrous metals and high-alloyed materials

41°

30°

40°

RF 100 A (type W)

31°

42°

38°

44°

45° 46°

187

Guhring Products

// Manufacturing program

Page 03

GUHRING CARDBIE

TECHNICAL INFORMATION

GUHRING HARD MATERIALS

CARBIDE KNOW-HOW OF THE HIGHEST LEVEL

With annual productionofofininexcess excessofof1500 1500tons tonsGuhring GuhringHard HardMaterial Materialdivision division is is one one of of the the leading With anan annual production leading carbide carbide manufacturers. manufacturers. Grade variety, manufacturing possibilities and capacities as well as quality set market the same as and Grade variety, manufacturing possibilities and capacities as well as quality set market standards – thestandards same as –expert advice advice and the development supportContact for our customers. Contact us and us are withsure yourwe task. Weoffer are sure weefficient can theexpert development support for our customers. us and involve us with yourinvolve task. We can you an offer you an efficient and cost-effective solution. and cost-effective solution. CARBIDE BLANKS CARBIDE BLANKS • for punches, corepullers, pullers,drawing drawingdies diesand andmuch muchmore more for for the the forming forming technology technology • for punches, core • for cutting, punching, drilling, milling, shredding etc. for the machining technology • for cutting, punching, drilling, milling, shredding etc. for the machining technology • for grooved bushes, nozzles, pressureand andskid skidplates platesfor forthe thewear wear protection protection technology • for grooved bushes, nozzles, pressure technology • for impact knives, stirring staffs or strainers for the food and pharmaceutical • for impact knives, stirring staffs or strainers for the food and pharmaceuticalindustry industry • for manufactureofofrotary rotarytools tools • for thethe manufacture

188

High Speed Steels Only high quality tool materials are used to produce HSS tools. Systematic selection of alloying elements ensure the tool possesses the optimal characteristics for the individual tasks. Tungsten, Molybdenum: Increase tempering and wearing resistance. Vanadium: Increases wear-resistance of finishing tools. Cobalt: Enables increased hardening temperatures and improves heat-resistance. Guhring description

German steel description

Material No. (steel code)

HSS

HS 6-5-2 (DMo5)

1.3343

standard tool material for most common applications

HSCO HSS-E

HS 6-5-2-5 (EMo5Co5)

1.3243

high heat-resistance, especially suited for roughing or when coolant insufficient

HSS-E

HS 6-5-3 (EMo5V3)

1.3344

high friction resistance and cutting edge stability, especially important for reaming operations

M42

HS 2-9-1-8

1.3247

increased heat resistance and hardness, suitable for difficultto-machine materials

10-2-5-8, PM52 HS 6-5-3-8, PM30

1.3253 1.3294

high hardness, heat-resistance and cutting edge stability, very dense structure

TECHNICAL INFORMATION

TOOL MATERIALS

Range of application

HSS-E HSS-E-PM

Individual Guhring carbide grades The following table lists the most important carbides that are available from Guhring ex=stock for general applications. In more than 80% of applications known to Guhring, the results of DK460UF carbide grade tools together with a specially adapted coating could not be surpassed by any other carbide grades, including coated tools. This and the availability of the material exstock simplify tool selection immensely. For further information regrading the application of other carbide grades please contact to our technical engineers. Tungsten Guhring Co-content Hardness ISO classificacarbide grain Description [M-%] [HV] tion [ISO 513] size [µm]

Characteristics

DK460UF

0.5

1620

K20-K40 coated: P, M20-M40, H, S, N25

A carbide grade with wide range of application possibilities. It is applied, mostly coated, for the machining of steel, soft Al alloys, cast iron as well as “super alloys” such as Inconel 718. This grade is the backbone of our carbide production.

DK500UF

0.5

1680

K25 coated: P, M, H, S, N25

The grade has been especially developed for hard machining. It possesses a higher hardness and deformation tolerance in comparison to DK460UF. Due to the high Co-content, a coated application is strongly recommended.

DK255F

0.7

1720

K20 coated: P, M, H, S, N20

The grade is recommended for hard machining, the machining of high tensile grey cast iron and hard AlSialloys. Dry machining is possible. A coated application is preferable.

DK120

1.3

1620

K15 coated: N15

DK120UF

0.5

1850

K05

K555F

0.2 - 0.5

1920

K10-K30

DK400N

0.7

1580

The grade is especially suitable for the application with diamond coating. Ultra fine grain type offering extreme wear resistance, suitable for absolutely rigid machines, preferred for reamers. For application with high wear resistant materials, stainless steels, composite materials such as Kevlar and GRP, high speed machining and dry machining.

K35M coated: P, An extremely tough grade for the machining of high M, S, N35M heat resistant metals.

189

GM 300

TO O L H O L D ER S A N D C L A M PI N G D E V I C ES

INNOVATIONS FOR THE METAL-CUTTING INDUSTRY High clamping force Perfect conventricity Maximum operational safety Optimal coolant delivery

190

GM 300

Tool Management Powered by

Optimising Customising Saving OUR CUSTOMERS CONFIRM: Reduction in tooling cost Reduction in administrative efforts Reduction in machine down time Tool availability 24/7

191

Work easily, quickly and efficiently with each application! Length setting Fume extraction Vapours produced during the shrink fit process are removed and filtered under controlled conditions by the fume extraction system.

During the shrink fit process the tool is pre-set to the required length with the assistance of an adjustment rod.

Quick cooling The water-cooled cooling elements cool down the shrink fit chuck quickly and safely. The shrink fit chuck remains clean and dry, so that it can be applied again without drying and without rusting. Hot spots remain safely screened during the cooling process in order to prevent burns.

Tool identification Balluff chip

User-friendly software

The read and write function of the Balluff chip simplifies tool identification. Tool life can be managed.

Intuitive menu navigation similar to the wellestablished Guhring TM-Software GTMS via touch-screen monitor (for details see page 5).

Label printer Safe shrink fitting The minimal heating of the shrink fit chuck ensures maximum operating safety on the one hand, on the other the controlled heating ensures the long life of the shrink fit chuck.

192

Print data such as Guhring no., current setting dimension, date, operator etc. on an adhesive label for your pre-set tool.