Guhring Australian Stock Range 2014-2015 by Guhring Australia

DRILLS

STUB DRILLS

JOBBER DRILLS

LONG SERIES DRILLS

CENTRE DRILLS

SPOTTING DRILLS

STEP DRILLS

TAPER SHANK DRILLS

CARBIDE RATIO DRILLS

DEEP HOLE DRILLS

GUN DRILLS

Taps

METRIC TAPS

THREAD MILLING CUTTERS

101

IMPERIAL TAPS

102

FLUTELESS TAPS

111

HAND TAPS

115

BUTTON DIES

119

Milling Cutters

123

HSS MILLING CUTTERS

124

CARBIDE MILLING CUTTERS

129

BALL NOSE MILLING CUTTERS

140

CHAMFER & ENGRAVING

143

Reamers

148 149

CARBIDE REAMERS

158

Counterbores

164

Countersinks

166

GUHRING TOOL SETS

170

Production & Service

173

Technical Information

181

DISCLAIMER Guhring Australia Pty Ltd cannot be held responible for errors printed within this book.

CONTENTS

HSS REAMERS

DRILLS

Guhring no.

223

5520

Standard Tool material

5516

730

2463

DIN 6539

HSCO

Solid carbide

>Ø 2,36

GU500DZ

GT80

Cutting direction Tolerance

659

DIN 1897 HSS

Surface Type

1228

GV120

rh h8

Stub drills - HSS - HSCO - CARBIDE

Stub drills hss - hsco - CARBIDE

l2 l1

d1 mm

DRILLS 4

1.000 1.100 1.200 1.300 1.400 1.500 1.600 1.700 1.800 1.900 2.000 2.100 2.200 2.300 2.380 2.400 2.500 2.600 2.700 2.780 2.800 2.900 3.000 3.100 3.170 3.200 3.300 3.400 3.500 3.570 3.600 3.700 3.800

Inch

3/32

7/64

1/8

9/64

26.00 28.00 30.00 30.00 32.00 32.00 34.00 34.00 36.00 36.00 38.00 38.00 40.00 40.00 43.00 43.00 43.00 43.00 46.00 46.00 46.00 46.00 46.00 49.00 49.00 49.00 49.00 52.00 52.00 52.00 52.00 52.00 55.00

6.00 7.00 8.00 8.00 9.00 9.00 10.00 10.00 11.00 11.00 12.00 12.00 13.00 13.00 14.00 14.00 14.00 14.00 16.00 16.00 16.00 16.00 16.00 18.00 18.00 18.00 18.00 20.00 20.00 20.00 20.00 20.00 22.00

Availability •

•

• •

•

• • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • •

Guhring no.

223

5520

Standard Tool material

5516

730

2463

DIN 6539

HSCO

Solid carbide

>Ø 2,36

GU500DZ

GT80

Cutting direction

GV120

rh h8

Tolerance

659

DIN 1897 HSS

Surface Type

1228

Stub drills - HSS - HSCO - CARBIDE

Stub drills hss - hsco - CARBIDE

l2 l1

d1 mm

5/32

11/64

3/16

13/64

7/32

15/64

1/4

55.00 55.00 55.00 55.00 55.00 58.00 58.00 58.00 58.00 58.00 58.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 70.00 70.00 70.00 70.00 70.00

22.00 22.00 22.00 22.00 22.00 24.00 24.00 24.00 24.00 24.00 24.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 31.00 31.00 31.00 31.00 31.00

Availability • • • • •

•

• •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

•

• • • •

• • • • • • • • • • • • • • • • • • •

• •

•

• • •

DRILLS

3.900 3.970 4.000 4.100 4.200 4.300 4.370 4.400 4.500 4.600 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.560 5.600 5.700 5.800 5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400

Inch

• • • •

•

• •

• • •

Guhring no.

223

5520

Standard Tool material

5516

730 Solid carbide

>Ø 2,36

GU500DZ

GT80

GV120

rh h8

l2 l1

d1 mm

DRILLS 6

6.500 6.600 6.700 6.800 6.900 7.000 7.100 7.140 7.200 7.300 7.400 7.500 7.600 7.700 7.800 7.900 7.940 8.000 8.100 8.200 8.300 8.400 8.500 8.600 8.700 8.730 8.800 8.900 9.000 9.100 9.200 9.300 9.400

Inch

9/32

5/16

11/32

70.00 70.00 70.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00 84.00

31.00 31.00 31.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 37.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00

2463

DIN 6539

HSCO

Cutting direction Tolerance

659

DIN 1897 HSS

Surface Type

1228

Stub drills - HSS - HSCO - CARBIDE

Stub drills hss - hsco - CARBIDE

Availability •

• • •

•

• •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

•

• •

• • •

•

• •

• • • •

• • • • •

•

• • •

• •

•

• • • •

•

• •

• • • •

•

Guhring no.

223

5520

Standard Tool material

5516

730

2463

DIN 6539

HSCO

Solid carbide

>Ø 2,36

GU500DZ

GT80

Cutting direction

GV120

rh h8

Tolerance

659

DIN 1897 HSS

Surface Type

1228

Stub drills - HSS - HSCO - CARBIDE

Stub drills hss - hsco - CARBIDE

l2 l1

d1 mm

27/64

7/16

15/32 31/64

33/64

5/8

84.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 95.00 95.00 95.00 95.00 95.00 95.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 107.00 107.00 111.00 111.00 115.00 115.00 115.00 119.00 119.00 123.00 123.00

40.00 43.00 43.00 43.00 43.00 43.00 43.00 43.00 47.00 47.00 47.00 47.00 47.00 47.00 51.00 51.00 51.00 51.00 51.00 51.00 51.00 51.00 54.00 54.00 56.00 56.00 58.00 58.00 58.00 60.00 60.00 62.00 62.00

Availability •

• • • •

•

• • • • • •

•

• •

• • • • • • • • •

• •

• • •

•

• •

• • •

• •

• • •

•

• •

• • •

•

• • • •

DRILLS

9.500 9.600 9.700 9.800 9.900 10.000 10.200 10.500 10.720 10.800 11.000 11.110 11.500 11.800 11.910 12.000 12.300 12.500 12.700 12.800 13.000 13.100 13.500 14.000 14.500 15.000 15.500 15.870 16.000 16.500 17.000 17.500 18.000

Inch

• • • • •

Guhring no.

223

Standard Tool material

1228

mm 18.500 19.000 19.500 20.000

DRILLS 8

Inch

127.00 127.00 131.00 131.00

64.00 64.00 66.00 66.00

2463

DIN 6539

>Ø 2,36

GU500DZ

GT80

GV120

rh h8

730 Solid carbide

5516

HSCO

Cutting direction Tolerance

659

DIN 1897 HSS

Surface Type

5520

Stub drills - HSS - HSCO - CARBIDE

Stub drills hss - hsco - CARBIDE

Availability • • • •

Guhring no.

205

9651

HSS

Standard Tool material

5522

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

Solid carbide

>Ø 2,36

GT - 100 GT - 100

Cutting direction

rh h8

Tolerance

658

DIN 338

Surface Type

5523

Jobber drills - HSS - HSCO - HSS-E-PM - CARBIDE

jobber drills hss - hsco - hss-e-pm - CARBIDE

Inch

0.400 0.500 0.600 0.700 0.800 0.900 1.000 1.100 1.200 1.300 1.400 1.500 1.590 1.600 1.700 1.800 1.900 1.980 2.000 2.100 2.200 2.300 2.380 2.400 2.500 2.600 2.700 2.780 2.800 2.900 3.000 3.100 3.170

1/64

20.00 22.00 24.00 28.00 30.00 32.00 34.00 36.00 38.00 38.00 40.00 40.00 43.00 43.00 43.00 46.00 46.00 49.00 49.00 49.00 53.00 53.00 57.00 57.00 57.00 57.00 61.00 61.00 61.00 61.00 61.00 65.00 65.00

5.00 6.00 7.00 9.00 10.00 11.00 12.00 14.00 16.00 16.00 18.00 18.00 20.00 20.00 20.00 22.00 22.00 24.00 24.00 24.00 27.00 27.00 30.00 30.00 30.00 30.00 33.00 33.00 33.00 33.00 33.00 36.00 36.00

1/16

5/64

3/32

7/64

1/8

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • •

• • • •

• • • • • •

• • •

• • • •

• • • • • • • • •

• • • •

• • • • • • • • • • • •

• • • • •

•

• • • • • • • •

• • • • • • • • • • • • • •

• • • •

DRILLS

• • • • • •

Guhring no.

205

9651

HSS

Standard Tool material

5522

732

5517 Solid carbide

>Ø 2,36

GT - 100 GT - 100

rh h8

l2 l1

d1 mm

DRILLS 10

3.200 3.300 3.400 3.500 3.570 3.600 3.700 3.800 3.900 3,970 4.000 4.100 4.200 4.300 4.370 4.400 4.500 4.600 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.560 5.600 5.700 5.800

Inch

9/64

5/32

11/64

3/16

13/64

7/32

65.00 65.00 70.00 70.00 70.00 70.00 70.00 75.00 75.00 75.00 75.00 75.00 75.00 80.00 80.00 80.00 80.00 80.00 80.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 93.00 93.00 93.00 93.00 93.00 93.00

36.00 36.00 39.00 39.00 39.00 39.00 39.00 43.00 43.00 43.00 43.00 43.00 43.00 47.00 47.00 47.00 47.00 47.00 47.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 57.00 57.00 57.00 57.00 57.00 57.00

2464

Guhring std.

HSCO HSS-E-PM HSCO

Cutting direction Tolerance

658

DIN 338

Surface Type

5523

Jobber drills - HSS - HSCO - HSS-E-PM - CARBIDE

jobber drills hss - hsco - hss-e-pm - CARBIDE

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • • • •

• • • • • • • •

• • • • • • • • • • • • •

• • •

• •

• • • • • • •

Guhring no.

205

9651

HSS

Standard Tool material

5522

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

Solid carbide

>Ø 2,36

GT - 100 GT - 100

Cutting direction

rh h8

Tolerance

658

DIN 338

Surface Type

5523

Jobber drills - HSS - HSCO - HSS-E-PM - CARBIDE

jobber drills hss - hsco - hss-e-pm - CARBIDE

d1 mm

15/64

1/4

17/64

9/32

19/64

5/16

21/64

93.00 93.00 93.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00

57.00 57.00 57.00 63.00 63.00 63.00 63.00 63.00 63.00 63.00 63.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 69.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

• • •

• •

•

• • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • • • •

• • • • • •

• • • •

• • •

• • • •

•

• • • •

DRILLS

5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.750 6.800 6.900 7.000 7.100 7.140 7.200 7.300 7.400 7.500 7.540 7.600 7.700 7.800 7.900 7.940 8.000 8.100 8.200 8.300 8.330 8.400

Inch

• • • • •

• • • •

• • •

•

Guhring no.

205

9651

HSS

Standard Tool material

5522

732

5517 Solid carbide

>Ø 2,36

GT - 100 GT - 100

rh h8

l2 l1

d1 mm

DRILLS 12

8.500 8.600 8.700 8.730 8.800 8.900 9.000 9.100 9.130 9.200 9.300 9.400 9.500 9.520 9.600 9.700 9.800 9.900 9.920 10.000 10.100 10.200 10.300 10.320 10.400 10.500 10.600 10.700 10.720 10.800 10.900 11.000 11.100

Inch

11/32

23/64

3/8

25/64

13/32

27/64

117.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 125.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 142.00 142.00 142.00 142.00 142.00 142.00

75.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 81.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 94.00 94.00 94.00 94.00 94.00 94.00

2464

Guhring std.

HSCO HSS-E-PM HSCO

Cutting direction Tolerance

658

DIN 338

Surface Type

5523

Jobber drills - HSS - HSCO - HSS-E-PM - CARBIDE

jobber drills hss - hsco - hss-e-pm - CARBIDE

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • •

•

• • •

• •

• • • • • • • •

• •

• • •

• • • •

• • • • •

• • •

•

• •

•

• • •

•

• • • • • •

• •

•

• • • •

• •

•

Guhring no.

205

9651

HSS

Standard Tool material

5522

732

5517

2464

Guhring std.

HSCO HSS-E-PM HSCO

Solid carbide

>Ø 2,36

GT - 100 GT - 100

Cutting direction

rh h8

Tolerance

658

DIN 338

Surface Type

5523

Jobber drills - HSS - HSCO - HSS-E-PM - CARBIDE

jobber drills hss - hsco - hss-e-pm - CARBIDE

Inch

11.110 11.200 11.300 11.400 11.500 11.510 11.600 11.700 11.800 11.900 11.910 12.000 12.100 12.200 12.300 12.400 12.500 12.600 12.700 12.800 12.900 13.000 13.500 14.000 14.290 14.500 15.000 15.200 15.500 16.000

7/16

142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 160.00 160.00 169.00 169.00 169.00 178.00 178.00 178.00

94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 94.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 108.00 108.00 114.00 114.00 114.00 120.00 120.00 120.00

29/64

15/32

31/64

1/2

9/16

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• •

•

• •

• • •

•

• • •

•

• • •

• •

•

• • • • • • •

•

DRILLS

• •

Guhring no.

217

5536

Standard Tool material

5537

DIN 340 HSS

HSCO

>Ø 2,36

Surface Type

GU 500 DZ

Cutting direction

Long series twist drills - HSS - HSCO

long series drills twist drills - hss - hsco

l2 l1

d1 mm

DRILLS

1.000 1.500 2.000 2.500 2.700 2.800 3.000 3.170 3.300 3.400 3.500 3.570 3.800 3.900 3.970 4.000 4.200 4.300 4.370 4.500 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400 5.500 5.560 5.700

Inch

1/8

9/64

5/32

11/64

3/16

13/64

7/32

56.00 70.00 85.00 95.00 100.00 100.00 100.00 106.00 106.00 112.00 112.00 112.00 119.00 119.00 119.00 119.00 119.00 126.00 126.00 126.00 126.00 132.00 132.00 132.00 132.00 132.00 132.00 132.00 132.00 139.00 139.00 139.00 139.00

33.00 45.00 56.00 62.00 66.00 66.00 66.00 69.00 69.00 73.00 73.00 73.00 78.00 78.00 78.00 78.00 78.00 82.00 82.00 82.00 82.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 87.00 91.00 91.00 91.00 91.00

Availability • • • • • • • • • • • •

• • • • • • • • • •

m m

• • •

• •

m m m m m

m m m

m m

m m m

m m

• • • •

m m

• m

m m m m

• • • •

m m m

• •

•

• Australian stock item

German stock item

m m m m

Guhring no.

217

5536

Standard Tool material

5537

DIN 340 HSS

HSCO

>Ø 2,36

Surface N

GU 500 DZ

Cutting direction

Type

Long series twist drills - HSS - HSCO

long series drills twist drills - hss - hsco

l2 l1

d1 mm

15/64

1/4

17/64

19/64 5/16

11/32

3/8

139.00 139.00 139.00 148.00 148.00 148.00 148.00 156.00 156.00 156.00 156.00 156.00 156.00 165.00 165.00 165.00 165.00 165.00 175.00 175.00 175.00 175.00 184.00 184.00 184.00 184.00 184.00 184.00 184.00 184.00 195.00 195.00 205.00

91.00 91.00 91.00 97.00 97.00 97.00 97.00 102.00 102.00 102.00 102.00 102.00 102.00 109.00 109.00 109.00 109.00 109.00 115.00 115.00 115.00 115.00 121.00 121.00 121.00 121.00 121.00 121.00 121.00 121.00 128.00 128.00 134.00

Availability • • •

• • •

• •

• • • • •

• m

•

m m

m m m m m

• •

• • • •

• m

m m m m

• •

m m

DRILLS

5.800 5.950 6.000 6.300 6.350 6.500 6.700 6.750 6.800 6.900 7.000 7.200 7.500 7.540 7.940 8.000 8.100 8.500 8.700 8.730 9.000 9.500 9.520 9.700 9.800 9.900 10.000 10.200 10.300 10.500 11.000 11.500 12.000

Inch

• • • • •

• • • •

m m m

•

• Australian stock item

m m m m m m m m m m

German stock item

Guhring no.

217

5536

Standard Tool material

5537

DIN 340 HSS

HSCO

>Ø 2,36

Surface Type

GU 500 DZ

Cutting direction

Long series twist drills - HSS - HSCO

long series drills twist drills - hss - hsco

l2 l1

d1 mm 12.500 12.700 13.000 13.500 14.000

Inch

1/2

205.00 205.00 205.00

134.00 134.00 134.00

Availability • • •

• • • •

DRILLS • Australian stock item

German stock item

m m m

Guhring no.

502

618

Standard Tool material

DIN 1869 HSS

HSCO

Surface

>Ø 2,36

Type

GT 100

Cutting direction

Extra length twist drills - series 1 - HSS - HSCO

long series drills extra length twist drills - series 1 - hss - hsco

d1 mm

1/8 9/64 5/32

11/64 3/16 13/64 7/32 15/64 1/4 17/64

19/64 5/16

11/32

3/8

150.00 155.00 165.00 165.00 175.00 175.00 175.00 185.00 185.00 195.00 195.00 195.00 205.00 205.00 205.00 205.00 215.00 215.00 225.00 225.00 225.00 225.00 240.00 240.00 240.00 240.00 250.00 250.00 250.00 265.00 265.00 265.00 280.00

100.00 105.00 115.00 115.00 120.00 120.00 120.00 125.00 125.00 135.00 135.00 135.00 140.00 140.00 140.00 140.00 150.00 150.00 155.00 155.00 155.00 155.00 165.00 165.00 165.00 165.00 175.00 175.00 175.00 185.00 185.00 185.00 195.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

m m m m m m m m m m m m m m

m m m m m m m

DRILLS

3.000 3.170 3.500 3.570 3.970 4.000 4.200 4.370 4.500 4.760 5.000 5.160 5.500 5.560 5.950 6.000 6.350 6.500 6.750 6.800 7.000 7.500 7.540 7.940 8.000 8.500 8.730 9.000 9.500 9.520 10.000 10.500 11.000

Inch

m m m m m m m m m

German stock item

Guhring no.

502

Standard Tool material

618 DIN 1869

HSS

HSCO

Surface

>Ø 2,36

Type

GT 100

Cutting direction

Extra length twist drills - series 1 - HSS - HSCO

long series drills extra length twist drills - series 1 - hss - hsco

l2 l1

d1 mm 11.500 12.000 12.500 12.700 13.000

DRILLS 18

Inch

1/2

280.00 295.00 295.00 295.00 295.00

195.00 205.00 205.00 205.00 205.00

Availability • • • • •

Guhring no.

503

619

Standard Tool material

DIN 1869 HSS

HSCO

Surface

>Ø 2,36

Type

GT 100

Cutting direction

Extra length twist drills - series 2 - HSS - HSCO

long series drills extra length twist drills - series 2 - hss - hsco

d1 mm

1/8 9/64 5/32 11/64 3/16 13/64

1/4

9/32 5/16 21/64 11/32 3/8 27/64 7/16 1/2

160.00 190.00 200.00 210.00 210.00 220.00 220.00 235.00 245.00 245.00 245.00 260.00 260.00 275.00 275.00 290.00 290.00 290.00 305.00 305.00 305.00 320.00 320.00 340.00 340.00 365.00 365.00 365.00 375.00 375.00 375.00

110.00 130.00 135.00 145.00 145.00 150.00 150.00 160.00 170.00 170.00 170.00 180.00 180.00 190.00 190.00 200.00 200.00 200.00 210.00 210.00 210.00 220.00 220.00 235.00 235.00 250.00 250.00 250.00 260.00 260.00 260.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• Australian stock item

m m m m m m m m m

DRILLS

2.000 3.000 3.170 3.500 3.570 3.970 4.000 4.370 4.760 5.000 5.160 5.500 6.000 6.350 6.500 7.000 7.140 7.500 7.940 8.000 8.330 8.730 9.000 9.520 10.000 10.720 11.000 11.110 12.000 12.700 13.000

Inch

m m m

German stock item

Guhring no. Standard Tool material

504 DIN 1869 HSS

Surface Type Cutting direction

GT 100 rh

Extra length twist drills - series 3 - HSS

long series drills extra length twist drills - series 3 - hss

l2 l1

d1 mm

DRILLS 20

3.000 3.170 3.500 3.970 4.000 4.370 4.760 5.000 5.500 6.000 6.350 6.500 6.750 7.000 7.140 7.500 7.940 8.000 8.330 8.730 9.000 9.520 10.000 10.320 10.500 11.000 11.110 12.000 13.000

Inch 1/8 5/32 11/64 3/16

1/4 17/64 9/32 5/16 21/64 11/32 3/8 13/32

7/16

240.00 250.00 265.00 280.00 280.00 295.00 315.00 315.00 330.00 330.00 350.00 350.00 370.00 370.00 370.00 370.00 390.00 390.00 390.00 410.00 410.00 430.00 430.00 430.00 430.00 455.00 455.00 480.00 480.00

160.00 170.00 180.00 190.00 190.00 200.00 210.00 210.00 225.00 225.00 235.00 235.00 250.00 250.00 250.00 250.00 265.00 265.00 265.00 280.00 280.00 295.00 295.00 295.00 295.00 310.00 310.00 330.00 330.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Guhring no.

242

Standard

243

244

Guhring std.

Tool material

HSS

Surface Type

GT 100

Cutting direction

Extra length twist drills - HSS

long series drills extra length twist drills - hss

l2 l1

6.000 8.000 10.000 11.000 12.000

500.00 500.00 600.00 600.00 600.00

400.00 400.00 500.00 500.00 500.00

8.000 10.000 11.000 12.000

750.00 750.00 750.00 750.00

650.00 650.00 650.00 650.00

10.000 11.000 12.000

1000.00 1000.00 1000.00

850.00 850.00 850.00

Inch

Availability • • • • •

• • • •

DRILLS

• • •

Guhring no. Standard Tool material

301

701

DIN 1899

Guhring std.

HSS-E-PM

Solid Carbide

Surface Type

Cutting direction

0/-0,004

Tolerance

Micro-precision drills - HSS-E-PM - carbide

micro-precision drills - hss-e-pm - Carbide

l2 l1

DRILLS

0.100 0.180 0.200 0.300 0.400 0.500 0.600 0.700 0.800 0.900 1.000 1.100 1.200 1.300 1.400 1.500 1.600 1.700 1.800 1.900

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00

25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 30.00 30.00 30.00 30.00 30.00

0.50 1.10 1.50 1.90 3.00 3.40 3.90 4.20 5.30 6.00 6.80 7.60 8.50 8.50 9.50 9.50 10.60 10.60 11.80 11.80

Availability • • • • • • • • • • • • • • • • • • • •

• Australian stock item

m m m m m m m m

German stock item

Guhring no. Standard Tool material

581

736

DIN 333

Guhring std.

HSS

Solid Carbide

Surface A

Cutting direction

60 o

Form

Centre drills without flat - HSS - carbide

centre drills without flat - hss - carbide

d1 mm 0.500 0.800 1.000 1.250 1.600 2.000 2.500 3.150 4.000 5.000 6.300

No.

1 2 3 4 5 6

3.150 3.150 3.150 3.150 4.000 5.000 6.300 8.000 10.000 12.500 16.000

25.00 25.00 31.50 31.50 35.50 40.00 45.00 50.00 56.00 63.00 71.00

Availability • • • • • • • • • • •

• • •

DRILLS

• Australian stock item

German stock item

Guhring no.

557

568

Standard

557F

723

Guhring std.

Tool material

HSS

Solid Carbide

Surface Type

Point angleº

Cutting direction

Tolerance

•

• • •

90º nc-spotting drills - HSS - CARBIDE

90º NC-Spotting drills - hss - CARBIDE

l2 l1

d1 mm 3.000 4.000 5.000 6.000 6.350 8.000 9.520 10.000 12.000 12.700 15.870 16.000 19.050 20.000 25.000 25.400

DRILLS 24

Inch

1/4 3/8

1/2 5/8 3/4 63/64 1

46.00 55.00 62.00 66.00 70.00 79.00 89.00 89.00 102.00 102.00 115.00 115.00 131.00 131.00 151.00 156.00

12.00 12.00 14.00 16.00 17.00 21.00 25.00 25.00 30.00 30.00 37.50 37.50 45.00 45.00 53.00 53.00

Availability • • • • • • • • • • • • • • • •

•

• • •

• •

•

• • • • • • • • •

Guhring no.

380

5003

Standard Tool material

Guhring std. HSS

Solid Carbide

Surface Type

Form

for tapping size holes

Cutting direction

90 o

NEW

118o d2 d1

l3 l2

Step drills for tapping hole sizes - HSS - CARBIDE

straight shank short step drills - hss - CARBIDE

for

Code (mm)

thread

3.400 2.500 3.400 52.00 4.500 3.300 4.500 58.00 5.500 4.200 5.500 66.00 6.600 5.000 6.600 70.00 9.000 6.800 9.000 84.00 11.000 8.500 11.000 95.00 13.500 10.200 13.500 107.00

20.00 24.00 28.00 31.00 40.00 47.00 54.00

8.80 11.40 13.60 16.50 21.00 25.50 30.00

M3 M4 M5 M6 M8 M10 M12

3.400 4.500 5.500 6.600 9.000 11.000 13.500 14.000 16.000

20.00 27.00 27.00 31.00 40.00 47.00 53.00 60.00 65.00

8.80 11.40 13.60 16.50 21.00 25.50 30.00 34.50 38.50

M3 M4 M5 M6 M8 M10 M12 M14 M16

2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00

4.00 4.50 6.00 8.00 10.00 12.00 14.00 14.00 16.10

52.00 63.00 63.00 80.00 80.00 100.00 100.00 108.00 108.00

Availability • • • • • • •

• • • • • • • • •

DRILLS

Other sizes available on request

Guhring no. Standard Tool material

245 DIN 345 HSS >Ø 2,36

Surface Type

Cutting direction

Tolerance

taper shank Twist drills - HSS

Taper shank twist drills - hss

MT l1

d1 mm

DRILLS 26

13.000 13.500 14.000 14.250 14.290 14.500 15.000 15.080 15.500 15.750 15.800 15.870 16.000 16.270 16.500 16.750 17.000 17.460 17.500 17.860 18.000 18.250 18.500 18.650 19.000 19.050 19.500 19.840 20.000 20.500 20.640 21.000 21.430

inch

9/16

19/32

5/8 41/64

45/64

47/64 3/4 25/32

13/16 27/32

MT 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

182.00 189.00 189.00 212.00 212.00 212.00 212.00 218.00 218.00 218.00 218.00 218.00 218.00 223.00 223.00 223.00 223.00 228.00 228.00 228.00 228.00 233.00 233.00 233.00 233.00 238.00 238.00 238.00 238.00 243.00 243.00 243.00 248.00

101.00 108.00 108.00 114.00 114.00 114.00 114.00 120.00 120.00 120.00 120.00 120.00 120.00 125.00 125.00 125.00 125.00 130.00 130.00 130.00 130.00 135.00 135.00 135.00 135.00 140.00 140.00 140.00 140.00 145.00 145.00 145.00 150.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Guhring no. Standard Tool material

245 DIN 345 HSS >Ø 2,36

Surface N

Cutting direction

Tolerance

Type

taper shank Twist drills - HSS

Taper shank twist drills - hss

MT l1

d1 mm

7/8

15/16

63/64 1

1 1/32

1 1/8

1 3/16

1 1/4

2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4

248.00 248.00 248.00 248.00 253.00 253.00 276.00 281.00 281.00 281.00 281.00 286.00 286.00 286.00 286.00 286.00 291.00 291.00 291.00 296.00 296.00 296.00 296.00 296.00 301.00 301.00 301.00 301.00 306.00 334.00 334.00 339.00 339.00

150.00 150.00 150.00 150.00 155.00 155.00 155.00 160.00 160.00 160.00 160.00 165.00 165.00 165.00 165.00 165.00 170.00 170.00 170.00 175.00 175.00 175.00 175.00 175.00 180.00 180.00 180.00 180.00 185.00 185.00 185.00 190.00 190.00

Availability • • • • • • • • • • • • • • • • • • • • •

DRILLS

21.500 22.000 22.220 22.250 22.500 23.000 23.500 23.810 24.000 24.500 25.000 25.400 25.500 26.000 26.190 26.500 27.000 27.500 28.000 28.500 28.570 29.000 29.500 30.000 30.160 30.500 31.000 31.500 31.750 32.000 33.000 34.000 35.000

inch

• • • • • • • •

Guhring no. Standard Tool material

245 DIN 345 HSS >Ø 2,36

Surface Type

Cutting direction

Tolerance

taper shank Twist drills - hss

Taper shank twist drills - hss

MT l1

d1 mm 36.000 37.310 38.000 38.100 40.000 41.000 42.000 43.000 44.000 45.000 48.000 50.000 60.000

DRILLS 28

inch 1 15/32 1 1/2

MT 4 4 4 4 4 4 4 4 4 4 4 4 5

344.00 344.00 349.00 349.00 349.00 354.00 354.00 359.00 359.00 359.00 369.00 369.00 422.00

195.00 195.00 200.00 200.00 200.00 205.00 205.00 210.00 210.00 210.00 220.00 220.00 235.00

Availability

• • • • • • • •

Guhring no.

363

Standard

663 Guhring std.

Tool material

HSCO

Surface Type

GV120

Tolerance

GV120

Cutting direction

Taper shank ARMOUR PIERCING DRILLS - hsCO

Taper shank ARMOUR PIERCING DRILLS - hSCO

MT l1

d1 mm

1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4

147.00 168.00 168.00 172.00 172.00 176.00 176.00 179.00 179.00 183.00 183.00 186.00 186.00 212.00 216.00 216.00 219.00 219.00 222.00 225.00 225.00 256.00 259.00 259.00 263.00 263.00 269.00

66.00 70.00 70.00 74.00 74.00 78.00 78.00 81.00 81.00 85.00 85.00 88.00 88.00 91.00 95.00 95.00 98.00 98.00 101.00 104.00 104.00 107.00 110.00 110.00 114.00 114.00 120.00

Availability

• • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

DRILLS

13.000 13.500 14.000 14.500 15.000 15.500 16.000 16.500 17.000 17.500 18.000 18.500 19.000 20.000 20.500 21.000 21.500 22.000 23.000 24.000 25.000 26.000 27.000 28.000 29.000 30.000 32.000

Guhring no. Standard Tool material

257 DIN 341 HSS

Surface Type

Cutting direction

Tolerance

Taper shank LONG SERIES twist drills - hss

MT l1

d1 mm 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00

MT 1 1 2 2 2 2 2 2

215.00 223.00 245.00 251.00 257.00 263.00 269.00 275.00

134.00 142.00 147.00 153.00 159.00 165.00 171.00 177.00

Availability • • • • • • • •

Other sizes are available on request

DRILLS 30

Guhring no.

526

Standard

527 DIN 1870

Tool material

HSS >Ø 16,0

Surface Type

GT 100

Tolerance

GT 100

Cutting direction

MT l1

d1 mm

1 1 1 2 2 2 2 2 2

310.00 310.00 325.00 340.00 355.00 355.00 370.00 370.00 385.00

205.00 205.00 220.00 220.00 230.00 230.00 245.00 245.00 260.00

12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

1 1 1 2 2 2 2 2 2

395.00 395.00 410.00 425.00 445.00 445.00 465.00 465.00 490.00

260.00 260.00 275.00 275.00 295.00 295.00 310.00 310.00 325.00

Availability • • • • • • • • •

• • • • • • • • •

DRILLS

12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

taper shank SERIES Extra length twist drills - hss

Guhring no.

565

Standard

293 Guhring std.

Tool material

HSS

Surface

>Ø 16,0

Type

GT 100

Cutting direction

Tolerance

taper shank Extra length twist drills - HSS

Taper shank extra length twist drills - hss

MT l1

d1 mm

DRILLS 32

10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000

1 1 1 1 1 2 2 2

425.00 425.00 425.00 425.00 425.00 425.00 425.00 425.00

345.00 345.00 345.00 345.00 345.00 325.00 325.00 325.00

14.000 15.000 16.000 17.000 18.000 19.000 20.000 21.000 22.000 23.000 24.000 25.000

1 2 2 2 2 2 2 2 2 2 3 3

600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00 600.00

500.00 500.00 500.00 500.00 500.00 500.00 500.00 500.00 500.00 500.00 475.00 475.00

Availability • • • • • • • •

• • • • • • • • • • • •

Guhring no.

298

Standard

299 Guhring std.

Tool material

HSS

Surface Type

GT 100

Tolerance

GT 100

Cutting direction

taper shank Extra length twist drills - HSS

Taper shank extra length twist drills - hss

MT l1

d1 mm

14.000 15.000 16.000 18.000

1 2 2 2

750.00 750.00 750.00 750.00

650.00 650.00 650.00 650.00

14.000 15.000 16.000 18.000

1 2 2 2

1000.00 1000.00 1000.00 1000.00

850.00 850.00 850.00 850.00

Availability • • • •

• • • •

DRILLS 33

Guhring no.

270

Standard

1101 Guhring std.

Tool material

HSS

Surface Type

Cutting direction

Tolerance

end coolant d1

taper shank - Oil feed drills - HSS

Taper shank oil feed drills - hss

MT l1

270

taper radial coolant l2

MT l1

1101

d1 mm

DRILLS 34

10.000 12.000 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000

2 2 2 2 2 3 3 3 3 4

233.00 251.00 259.00 270.00 282.00 313.00 327.00 342.00 350.00 385.00

116.00 134.00 142.00 153.00 165.00 177.00 191.00 206.00 214.00 222.00

12.000 14.000 16.000 18.000 19.000 20.000 22.000 26.000 28.000

2 2 2 2 2 2 2 3 3

241.00 249.00 260.00 272.00 278.00 284.00 298.00 340.00 348.00

134.00 142.00 153.00 165.00 171.00 177.00 191.00 214.00 222.00

Availability • • • • • • • • • •

• • • • • • • • •

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type Cutting direction Tolerance

RT 100 U

3xD

Drilling depth

RT 100 U

Carbide high performance ratio drills - 3 x D

carbide high performance ratio drills - 3 x d

l2 l1

d1 mm

1/8

9/64

5/32

11/64

3/16

13/64

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000

62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 62.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00

20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

• m

• m m m m m m m

• m m m

• m m m m m m m

DRILLS

3.000 3.100 3.170 3.200 3.250 3.300 3.400 3.500 3.570 3.600 3.700 3.800 3.900 3.970 4.000 4.100 4.200 4.300 4.370 4.400 4.500 4.600 4.650 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400

inch

m m m m m

• m m m m m m

German stock item

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type Cutting direction Tolerance Drilling depth

RT 100 U

3xD

Carbide high performance ratio drills - 3 x D

carbide high performance ratio drills - 3 x d

l2 l1

d1 mm

DRILLS

5.500 5.550 5.560 5.600 5.700 5.800 5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.750 6.800 6.900 7.000 7.100 7.140 7.200 7.300 7.400 7.500 7.540 7.600 7.700 7.800 7.900 7.940

inch

7/32

15/64

1/4

17/64

9/32

19/64

5/16

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000

66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00 79.00

28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 34.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

m m m m m

• m m

• m m m

• m m m m m m m

• m m m m

• m m m m m m m m

German stock item

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type Cutting direction Tolerance

RT 100 U

3xD

Drilling depth

RT 100 U

Carbide high performance ratio drills - 3 x D

carbide high performance ratio drills - 3 x d

l2 l1

d1 mm

21/64

11/32

23/64

3/8

25/64

13/32

8.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 12.000 12.000

79.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 89.00 102.00 102.00 102.00 102.00 102.00 102.00

41.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 47.00 55.00 55.00 55.00 55.00 55.00 55.00

36.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00 45.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Australian stock item

• m

• m m m m m m m

• • • m m m m m m m m m

DRILLS

8.000 8.100 8.200 8.300 8.330 8.400 8.500 8.600 8.700 8.730 8.800 8.900 9.000 9.100 9.130 9.200 9.250 9.300 9.400 9.500 9.520 9.600 9.700 9.800 9.900 9.920 10.000 10.100 10.200 10.300 10.320 10.400 10.500

inch

m m m m

• m m m m m m m

German stock item

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type Cutting direction Tolerance Drilling depth

RT 100 U

3xD

Carbide high performance ratio drills - 3 x D

carbide high performance ratio drills - 3 x d

l2 l1

d1 mm

DRILLS

10.600 10.700 10.800 10.900 11.000 11.100 11.110 11.200 11.300 11.400 11.500 11.600 11.700 11.800 11.900 11.910 12.000 12.200 12.500 12.700 12.800 13.000 13.500 13.700 14.000 14.200 14.290 14.500 14.700 15.000 15.100 15.200 15.500

inch

7/16

15/32

1/2

9/16

12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 14.000 14.000 14.000 14.000 14.000 14.000 14.000 14.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000 16.000

102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00 107.00 107.00 107.00 107.00 107.00 107.00 107.00 107.00 115.00 115.00 115.00 115.00 115.00 115.00 115.00 115.00

55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 55.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00

Availability • •

• •

• • • • • • •

• m m m m m m

• • •

m m

•

• • • • • • •

•

m m m m

•

• • • • • Australian stock item

• m m m m

German stock item

Guhring no.

5514

5510

Standard

DIN 6537 K

Tool material

Solid carbide

Surface Type Cutting direction Tolerance

RT 100 U

3xD

Drilling depth

RT 100 U

Carbide high performance ratio drills - 3 x D

carbide high performance ratio drills - 3 x d

l2 l1

d1 mm 15.700 16.000 16.100 16.500 16.900 17.000 17.500 18.000 18.500 19.000 19.500 20.000

inch

16.000 16.000 18.000 18.000 18.000 18.000 18.000 18.000 20.000 20.000 20.000 20.000

115.00 115.00 123.00 123.00 123.00 123.00 123.00 123.00 131.00 131.00 131.00 131.00

65.00 65.00 73.00 73.00 73.00 73.00 73.00 73.00 79.00 79.00 79.00 79.00

48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00 50.00

Availability m

• m

• •

•

DRILLS

• Australian stock item

German stock item

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type Cutting direction Tolerance Drilling depth

RT 100 U

5xD

Carbide high performance ratio drills - 5 x D

carbide high performance ratio drills - 5 x d

l2 l1

d1 mm

DRILLS

3.000 3.100 3.170 3.200 3.250 3.300 3.400 3.500 3.570 3.600 3.700 3.800 3.900 3.970 4.000 4.100 4.200 4.300 4.370 4.400 4.500 4.600 4.650 4.700 4.760 4.800 4.900 5.000 5.100 5.160 5.200 5.300 5.400

inch

1/8

9/64

5/32

11/64

3/16

13/64

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000

66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 66.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 74.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00

28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 36.000 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

Availability • • • •

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • m

• • • m

• • m

• • • m

• • • • • m

• Australian stock item

German stock item

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type Cutting direction Tolerance

RT 100 U

5xD

Drilling depth

RT 100 U

Carbide high performance ratio drills - 5 x D

carbide high performance ratio drills - 5 x d

l2 l1

d1 mm

7/32

15/64

1/4

17/64

9/32

19/64

5/16

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000

82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 82.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00 91.00

44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 44.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00 53.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

Availability •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• m m

• m

• • m

• m

• • m

• m

• • • • • • m m

• m

• • Australian stock item

DRILLS

5.500 5.550 5.560 5.600 5.700 5.800 5.900 5.950 6.000 6.100 6.200 6.300 6.350 6.400 6.500 6.600 6.700 6.750 6.800 6.900 7.000 7.100 7.140 7.200 7.300 7.400 7.500 7.540 7.600 7.700 7.800 7.900 7.940

inch

German stock item

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type Cutting direction Tolerance Drilling depth

RT 100 U

5xD

Carbide high performance ratio drills - 5 x D

carbide high performance ratio drills - 5 x d

l2 l1

d1 mm

DRILLS 42

inch

21/64

11/32

23/64

3/8

25/64

13/32

91.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 103.00 118.00 118.00 118.00 118.00 118.00 118.00

53.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 61.00 71.00 71.00 71.00 71.00 71.00 71.00

36.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00 45.00

Availability •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

m m m

• m

• • m

• m m m m

• m

• • • m

• m m

• m

• • Australian stock item

German stock item

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type Cutting direction Tolerance

RT 100 U

5xD

Drilling depth

RT 100 U

Carbide high performance ratio drills - 5 x D

carbide high performance ratio drills - 5 x d

l2 l1

d1 mm

7/16

15/32

1/2

9/16

118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 118.00 124.00 124.00 124.00 124.00 124.00 124.00 124.00 124.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00

71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 71.00 77.00 77.00 77.00 77.00 77.00 77.00 77.00 77.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00 83.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00

Availability • • • • • • • • • • • • • • • • •

m m

• m

• • m m

• m m

• •

• • • • • • • • • • • •

• m

• • m

• m m

• m

• •

• Australian stock item

DRILLS

10.600 10.700 10.800 10.900 11.000 11.100 11.110 11.200 11.300 11.400 11.500 11.600 11.700 11.800 11.900 11.910 12.000 12.100 12.200 12.500 12.700 13.000 13.500 13.700 14.000 14.200 14.290 14.500 14.700 14.800 15.000 15.200 15.500

inch

m m

German stock item

Guhring no.

5515

5511

Standard

DIN 6537 L

Tool material

Solid carbide

Surface Type Cutting direction Tolerance Drilling depth

RT 100 U

5xD

Carbide high performance ratio drills - 5 x D

carbide high performance ratio drills - 5 x d

l2 l1

d1 mm 15.700 16.000 16.500 17.000 17.500 18.000 18.500 19.000 19.500 20.000

inch

16.000 16.000 18.000 18.000 18.000 18.000 20.000 20.000 20.000 20.000

133.00 133.00 143.00 143.00 143.00 143.00 153.00 153.00 153.00 153.00

83.00 83.00 93.00 93.00 93.00 93.00 101.00 101.00 101.00 101.00

48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00 50.00

Availability •

• •

• • •

•

m m

DRILLS • Australian stock item

German stock item

Guhring no.

5512

Standard

Guhring std.

Tool material

Solid carbide

Surface Type Cutting direction Tolerance

rh m7 7xD

Drilling depth

RT 100 U

Carbide high performance ratio drills - 7 x D

carbide high performance ratio drills - 7 x d

l2 l1

d1 mm

1/4

3/8

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000

75.00 85.00 90.00 90.00 97.00 97.00 97.00 97.00 97.00 106.00 106.00 106.00 106.00 116.00 116.00 116.00 116.00 116.00 116.00 116.00 131.00 131.00 131.00 131.00 131.00 139.00 139.00 139.00 139.00 155.00 155.00 155.00 155.00

37.50 45.00 50.00 50.00 57.00 57.00 57.00 57.00 57.00 66.00 66.00 66.00 66.00 76.00 76.00 76.00 76.00 76.00 76.00 76.00 87.00 87.00 87.00 87.00 87.00 95.00 95.00 95.00 95.00 106.00 106.00 106.00 106.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

DRILLS

4.000 4.600 5.000 5.200 5.500 5.560 5.800 5.950 6.000 6.350 6.500 6.750 6.800 7.000 7.140 7.500 7.540 7.800 7.940 8.000 8.330 8.500 8.730 9.000 9.130 9.500 9.520 9.800 10.000 10.200 10.320 10.500 11.000

inch

Guhring no.

5512

Standard

Guhring std.

Tool material

Solid carbide

Surface Type

RT 100 U

Cutting direction

Tolerance

Drilling depth

7xD

Carbide high performance ratio drills - 7 x D

carbide high performance ratio drills - 7 x d

l2 l1

d1 mm 11.110 11.500 11.910 12.000 12.500 12.700 13.000 13.500 14.000 14.500 15.000 15.500 16.000

inch

1/2

12.000 12.000 12.000 12.000 14.000 14.000 14.000 14.000 14.000 16.000 16.000 16.000 16.000

163.00 163.00 163.00 163.00 182.00 182.00 182.00 182.00 182.00 204.00 204.00 204.00 204.000

114.00 114.00 114.00 114.00 133.00 133.00 133.00 133.00 133.00 152.00 152.00 152.00 152.00

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00

Availability • • • • • • • m m m m m

•

DRILLS • Australian stock item

German stock item

Guhring no.

5525

Standard

Guhring std.

Tool material

Solid carbide

Carbide Grade

K/P

Surface Type

RT 100

Shank

Cutting Direction

Tolerance

h7 12 x D

Drilling depth

ratio drills with oil feed - 12 x D

Ratio drills with oil feed - 12 x D

l2 l1

3.000 3.500 4.000 4.500 5.000 5.200 5.500 6.000 6.350 6.500 6.800 7.000 7.500 8.000 8.500 9.000 9.500 10.000 10.500 11.000 11.500 12.000 12.500 12.700 13.000 13.500 14.000 14.500 15.000 15.500 16.000

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 14.000 14.000 14.000 14.000 14.000 16.000 16.000 16.000 16.000

90.00 90.00 102.00 102.00 116.00 116.00 116.00 116.00 146.00 146.00 146.00 146.00 146.00 146.00 162.00 162.00 162.00 162.00 204.00 204.00 204.00 204.00 230.00 230.00 230.00 230.00 230.00 260.00 260.00 260.00 260.00

50.00 50.00 64.00 64.00 78.00 78.00 78.00 78.00 108.00 108.00 108.00 108.00 108.00 108.00 120.00 120.00 120.00 120.00 156.00 156.00 156.00 156.00 182.00 182.00 182.00 182.00 182.00 208.00 208.00 208.00 208.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00

Availability m m m m m m m m m m m m m m m m m m m m m m

DRILLS

m m m m m m m m m

Other sizes available on request â&#x20AC;˘ Australian stock item

German stock item

Guhring no.

6511

Standard

Guhring std.

Tool material

Solid carbide

Carbide Grade

K30/K40

Surface Type

RT 100 T

Shank

Cutting Direction

Tolerance

h7 20 x D

Drilling depth

Spiral-fluted deep hole drill RT 100 T - 20 x D

l2 l1

DRILLS 48

3.000 4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000 10.000

6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000

110.00 136.00 158.00 158.00 180.00 180.00 202.00 202.00 223.00 223.00 249.00 249.00 271.00

70.00 96.00 118.00 118.00 140.00 140.00 162.00 162.00 183.00 183.00 205.00 205.00 227.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00

Availability • • • • • • • • • • • • •

Guhring no.

6513

Standard

Guhring std.

Tool material

Solid carbide

Carbide Grade

K30/K40

Surface Type

RT 100 T

Shank

Cutting Direction

Tolerance

h7 30 x D

Drilling depth

Spiral-fluted deep hole drill RT 100 T - 30 x D

l2 l1

4.000 4.500 5.000 5.500 6.000 6.500 7.000 7.500 8.000 8.500 9.000 9.520 10.000

6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000 8.000 10.000 10.000 10.000 10.000

176.00 208.00 208.00 240.00 240.00 272.00 272.00 303.00 303.00 339.00 339.00 371.00 371.00

136.00 168.00 168.00 200.00 200.00 232.00 232.00 263.00 263.00 295.00 295.00 327.00 327.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 40.00 40.00 40.00 40.00

Availability • • • • • • • • • • • •

DRILLS 49

Guhring no.

6514

Standard

Guhring std.

Tool material

Solid carbide

Carbide Grade

K30/K40

Surface Type

RT 100 T

Shank

Cutting Direction

Tolerance

h7 40 x D

Drilling depth

Spiral-fluted deep hole drill RT 100 T - 40 x D

l2 l1

DRILLS 50

4.000 5.000 5.500 6.000 6.500 7.000 7.500 8.000

6.000 6.000 6.000 6.000 8.000 8.000 8.000 8.000

216.00 258.00 280.00 300.00 322.00 342.00 363.00 383.00

176.00 218.00 240.00 260.00 282.00 302.00 323.00 343.00

36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00

Availability • • • • • • • •

HT 800 WP - The interchangeable insert drilling system With the new HT 800 WP interchangeable drilling system Guhring provides high-performance and cost-efficient holders for holes in the diameter range from 11.00 to 40.0 mm that excell thanks to the following advantages: a Extended tool life Thanks to special, micro-machined cutting edges and the application oriented surface finish the interchangeable inserts of the HT 800 WP drilling system are especially wear resistant. The holders of the HT 800 WP drilling system also possess a very high wear resistance. This is based on the optimised holder material with nickel plated surface as well as incremental holder sizes in steps of 0.5 mm up to diameter 31.99 mm and in steps of 1.0 mm above diameter 32.00 mm. This leads to less wear on the holder body.

b Optimised chip flow Thanks to their flute cross section the holders of the HT 800 WP drilling system ensure optimal chip evacuation from the hole even with larger drilling depths.

c Perfect cooling lubrication A perfect cooling lubrication is ensured by coolant ducts with maximum cross section, exiting in the flute. Thereby enabling an optimal cooling lubrication of the cutting edges and additionally support the chip evacuation from the hole.

d Highly accurate and rigid insert seat The accurate insert seat enables the insert change in the machine in only a few, simple steps with a standard Torx screw driver. Thanks to the optimised material for the holders of the HT 800 WP drilling system, the insert can be changed more frequently than with conventional systems before the holder needs to be replaced due to wear of the insert seat. The clamping screws with screw lock ensure a secure holding of the interchangeable insert in the holder even with machines subject to high levels of vibrations.

The interchangeable insert drilling system - HT 800 WP

HT 800 WP - Technology and Advantages

Rigid holders The close stepped diameter jumps with the holder sizes not only reduce wear. Through the better guidance of the tool in the hole they also increase the rigidity of the HT 800 WP drilling system. Subsequently, resulting in longer tool life as well as improved workpiece surfaces.

d DRILLS

51 4

HT 800 WP

Guhring no.

4107

DIN 6535-HE l4 d2

Interchangeable Insert Holders HT 800 WP - 3 x D

h l2

l3 l1

Code no.

DRILLS

11,000 11,005 11,500 11,505 12,000 12,005 12,500 12,505 13,000 13,005 13,500 13,505 14,000 14,005 14,500 14,505 15,000 15,005 15,500 15,505 16,000 16,005 16,500 16,505 17,000 17,005 17,500 17,505 18,000 18,005 18,500 18,505 19,000

Holder Size 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190

incl. WP l1*

l2 max

11.00 - 11.49 11.00 - 11.49 11.50 - 11.99 11.50 - 11.99 12.00 - 12.49 12.00 - 12.49 12.50 - 12.99 12.50 - 12.99 13.00 - 13.49 13.00 - 13.49 13.50 - 13.99 13.50 - 13.99 14.00 - 14.49 14.00 - 14.49 14.50 - 14.99 14.50 - 14.99 15.00 - 15.49 15.00 - 15.49 15.50 - 15.99 15.50 - 15.99 16.00 - 16.49 16.00 - 16.49 16.50 - 16.99 16.50 - 16.99 17.00 - 17.49 17.00 - 17.49 17.50 - 17.99 17.50 - 17.99 18.00 - 18.49 18.00 - 18.49 18.50 - 18.99 18.50 - 18.99 19.00 - 19.49

12.00 12.70 12.00 12.70 12.00 12.70 14.00 15.875 14.00 15.875 14.00 15.875 14.00 15.875 16.00 15.875 16.00 15.875 16.00 15.875 16.00 15.875 18.00 19.05 18.00 19.05 18.00 19.05 18.00 19.05 20.00 19.05 20.00

10.70 10.70 11.20 11.20 11.70 11.70 12.20 12.20 12.70 12.70 13.20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70

101.00 101.00 103.00 103.00 106.00 106.00 108.00 108.00 110.00 110.00 113.00 113.00 115.00 115.00 120.00 120.00 123.00 123.00 125.00 125.00 127.00 127.00 130.00 130.00 132.00 132.00 134.00 134.00 137.00 137.00 141.00 141.00 143.00

36.60 36.60 38.10 38.10 39.70 39.70 41.30 41.30 42.90 42.90 44.60 44.60 46.20 46.20 47.80 47.80 49.30 49.30 50.90 59.90 52.90 52.90 54.10 54.10 55.80 55.80 57.40 57.40 58.90 58.90 60.50 60.50 62.10

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00

Availability • m

• m

• • Australian stock item m

German stock item

Guhring no.

4107

DIN 6535-HE

h l2

l3 l1

Code no.

190 195 195 200 200 205 205 210 210 215 215 220 220 225 225 230 230 235 235 240 240 245 245 250 250 255 255 260 260 265 265 270 270

incl. WP l1*

l2 max

19.00 - 19.49 19.50 - 19.99 19.50 - 19.99 20.00 - 20.49 20.00 - 20.49 20.50 - 20.99 20.50 - 20.99 21.00 - 21.49 21.00 - 21.49 21.50 - 21.99 21.50 - 21.99 22.00 - 22.49 22.00 - 22.49 22.50 - 22.99 22.50 - 22.99 23.00 - 23.49 23.00 - 23.49 23.50 - 23.99 23.50 - 23.99 24.00 - 24.49 24.00 - 24.49 24.50 - 24.99 24.50 - 24.99 25.00 - 25.49 25.00 - 25.49 25.50 - 25.99 25.50 - 25.99 26.00 - 26.49 26.00 - 26.49 26.50 - 26.99 26.50 - 26.99 27.00 - 27.49 27.00 - 27.49

19.05 20.00 19.05 20.00 19.05 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75

18.70 19.20 19.20 19.70 19.70 20.20 20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.20 22.70 22.70 23.20 23.20 23.70 23.70 24.20 24.20 24.70 24.70 25.20 25.20 25.70 25.70 26.20 26.20 26.70 26.70

143.00 146.00 146.00 148.00 148.00 159.00 159.00 161.00 161.00 163.00 163.00 165.00 165.00 168.00 168.00 170.00 170.00 173.00 173.00 175.00 175.00 177.00 177.00 180.00 180.00 187.00 187.00 191.00 191.00 193.00 193.00 196.00 196.00

62.10 63.70 63.70 65.30 65.30 67.00 67.00 68.60 68.60 70.10 70.10 71.70 71.70 73.30 73.30 74.9 74.90 76.50 76.50 78.10 78.10 79.70 79.70 81.30 81.30 82.9 82.90 84.00 84.00 86.10 86.10 87.20 87.20

50.00 50.00 50.00 50.00 50.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Availability m

• m

•

DRILLS

19,005 19,500 19,505 20,000 20,005 20,500 20,505 21,000 21,005 21,500 21,505 22,000 22,005 22,500 22,505 23,000 23,005 23,500 23,505 24,000 24,005 24,500 24,505 25,000 25,005 25,500 25,505 26,000 26,005 26,500 26,505 27,000 27,005

Holder Size

Interchangeable Insert Holders HT 800 WP - 3 x D

• m m m

• m

• Australian stock item m

German stock item

Guhring no.

4107

DIN 6535-HE l4 d2

Interchangeable Insert Holders HT 800 WP - 3 x D

h l2

l3 l1

Code no.

DRILLS

27,500 27,505 28,000 28,005 28,500 28,505 29,000 29,005 29,500 29,505 30,000 30,005 30,500 30,505 31,000 31,005 31,500 31,505 32,000 32,005 33,000 33,005 34,000 34,005 35,000 35,005 36,000 36,005 37,000 37,005 38,000 38,005 39,000 39,005

Holder Size 275 275 280 280 285 285 290 290 295 295 300 300 305 305 310 310 315 315 320 320 330 330 340 340 350 350 360 360 370 370 380 380 390 390

incl. WP l1*

l2 max

27.50 - 27.99 27.50 - 27.99 28.00 - 28.49 28.00 - 28.49 28.50 - 28.99 28.50 - 28.99 29.00 - 29.49 29.00 - 29.49 29.50 - 29.99 29.50 - 29.99 30.00 - 30.49 30.00 - 30.49 30.50 - 30.99 30.50 - 30.99 31.00 - 31.49 31.00 - 31.49 31.50 - 31.99 31.50 - 31.99 32.00 - 32.99 32.00 - 32.99 33.00 - 33.99 33.00 - 33.99 34.00 - 34.99 34.00 - 34.99 35.00 - 35.99 35.00 - 35.99 36.00 - 36.99 36.00 - 36.99 37.00 - 37.99 37.00 - 37.99 38.00 - 38.99 38.00 - 38.99 39.00 - 40.00 39.00 - 40.00

32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75

27.20 27.20 27.70 27.70 28.20 28.20 28.70 28.70 29.20 29.20 29.70 29.70 30.20 30.20 30.70 30.70 31.20 31.20 31.70 31.70 32.70 32.70 33.70 33.70 34.70 34.70 35.70 35.70 36.70 36.70 37.70 37.70 38.70 38.70

198.00 198.00 200.00 200.00 202.00 202.00 205.00 205.00 207.00 207.00 210.00 210.00 212.00 212.00 214.00 214.00 216.00 216.00 221.00 221.00 226.00 226.00 230.00 230.00 235.00 235.00 240.00 240.00 245.00 245.00 249.00 249.00 254.00 254.00

88.90 88.90 90.40 90.40 92.50 92.50 94.60 94.60 95.10 95.10 96.70 96.70 98.30 98.30 99.80 99.80 101.40 101.40 104.60 104.60 107.80 107.80 111.00 111.00 114.20 114.20 117.30 117.30 120.50 120.50 123.70 123.70 126.90 126.90

60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Availability m m

• m m m

• m m m m m m m m m m m m m m m m m m m

• Australian stock item m

German stock item

Guhring no.

4108

DIN 6535-HE

h l2

l3 l1

Code no.

110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190

incl. WP l1*

l2 max

11.00 - 11.49 11.00 - 11.49 11.50 - 11.99 11.50 - 11.99 12.00 - 12.49 12.00 - 12.49 12.50 - 12.99 12.50 - 12.99 13.00 - 13.49 13.00 - 13.49 13.50 - 13.99 13.50 - 13.99 14.00 - 14.49 14.00 - 14.49 14.50 - 14.99 14.50 - 14.99 15.00 - 15.49 15.00 - 15.49 15.50 - 15.99 15.50 - 15.99 16.00 - 16.49 16.00 - 16.49 16.50 - 16.99 16.50 - 16.99 17.00 -17.49 17.00 - 17.49 17.50 - 17.99 17.50 - 17.99 18.00 - 18.49 18.00 - 18.49 18.50 - 18.99 18.50 - 18.99 19.00 - 19.49

10.70 10.70 11.20 110.20 11.70 11.70 12.20 12.20 12.70 12.70 13.20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70

124.00 124.00 127.00 127.00 131.00 131.00 134.00 134.00 137.00 137.00 141.00 141.00 144.00 144.00 150.00 150.00 154.00 154.00 157.00 157.00 160.00 160.00 164.00 164.00 167.00 167.00 170.00 170.00 174.00 174.00 179.00 179.00 182.00

59.60 59.60 62.10 62.10 64.70 64.70 67.30 67.30 69.90 69.90 72.60 72.60 75.20 75.20 77.80 77.80 80.30 80.30 82.90 82.90 85.90 85.90 88.10 88.10 90.80 90.80 93.40 .93.40 95.90 95.90 98.50 98.50 101.10

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00

Availability • m

• m

DRILLS

Holder Size

Interchangeable Insert Holders HT 800 WP - 5 x D

• m

• • Australian stock item m

German stock item

Guhring no.

4108

DIN 6535-HE

l4 d1

Interchangeable Insert Holders HT 800 WP - 5 x D

h l2

l3 l1

Code no.

DRILLS

Holder Size 190 195 195 200 200 205 205 210 210 215 215 220 220 225 225 230 230 235 235 240 240 245 245 250 250 255 255 260 265 270 275 280 285

incl. WP l1*

l2 max

19.00 - 19.49 19.50 - 19.99 19.50 - 19.99 20.00 - 20.49 20.00 - 20.49 20.50 - 20.99 20.50 - 20.99 21.00 - 21.49 21.00 - 21.49 21.50 - 21.99 21.50 - 21.99 22.00 - 22.49 22.00 - 22.49 22.50 - 22.99 22.50 - 22.99 23.00 - 23.49 23.00 - 23.49 23.50 - 23.99 23.50 - 23.99 24.00 - 24.49 24.00 - 24.49 24.50 - 24.99 24.50 - 24.99 25.00 - 25.49 25.00- 25.49 25.50 - 25.99 25.50 - 25.99 26.00 - 26.49 26.50 - 26.99 27.00 - 27.49 27.50 - 27.99 28.00 - 28.49 28.50 - 28.99

19.05 20.00 19.05 20.00 19.05 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 32.00 31.75 32.00 32.00 32.00 32.00 32.00 32.00

18.70 19.20 19.20 19.70 19.70 20.20 20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.20 22.70 22.70 23.20 23.20 23.70 23.70 24.20 24.20 24.70 24.70 25.20 25.20 25.70 26.20 26.70 27.20 27.70 28.20

182.00 186.00 186.00 189.00 189.00 201.00 201.00 204.00 204.00 207.00 207.00 210.00 210.00 214.00 214.00 217.00 217.00 221.00 221.00 224.00 224.00 227.00 227.00 231.00 231.00 239.00 239.00 244.00 247.00 251.00 254.00 257.00 260.00

101.10 103.70 103.70 106.30 106.30 109.00 109.00 111.60 111.60 114.10 114.10 116.70 116.70 119.30 119.30 121.90 121.90 124.50 124.50 127.10 127.10 129.70 129.70 132.30 132.30 134.90 134.90 137.00 140.00 142.20 144.80 147.40 150.40

50.00 50.00 50.00 50.00 50.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Availability m

• m

• m m m

• m

• Australian stock item m

German stock item

Guhring no.

4108

DIN 6535-HE

h l2

l3 l1

Code no. 29,000 29,500 30,000 30,500 31,000 31,500 32,000 33,000 34,000 35,000 36,000 37,000 38,000 39,000

Holder Size 290 295 300 305 310 315 320 330 340 350 360 370 380 390

incl. WP l1*

l2 max

29.00 - 29.49 29.50 - 29.99 30.00 - 30.49 30.50 - 30.99 31.00 - 31.49 31.50 - 31.99 32.00 - 32.99 33.00 - 33.99 34.00 - 34.99 35.00 - 35.99 36.00 - 36.99 37.00 - 37.99 38.00 - 38.99 39.00 - 40.00

32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00

28.70 29.20 29.70 30.20 30.70 31.20 31.70 32.70 33.70 34.70 35.70 36.70 37.70 38.70

264.00 267.00 271.00 274.00 277.00 280.00 287.00 294.00 300.00 307.00 314.00 321.00 327.00 334.00

153.50 155.10 157.60 160.20 162.80 165.40 170.60 175.80 181.00 186.20 191.30 196.50 201.70 206.90

60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Interchangeable Insert Holders HT 800 WP - 5 x D

Availability • m

• m

• m m m m m m m

DRILLS • Australian stock item m

German stock item

Guhring no.

4109

DIN 6535-HE

l4 d1

Interchangeable Insert Holders HT 800 WP - 7 x D

h l2

l3 l1

Code no.

DRILLS

holder size 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190

incl. WP l1*

l2 max

11.00 - 11.49 11.00 - 11.49 11.50 - 11.99 11.50 - 11.99 12.00 - 12.49 12.00 - 12.49 12.50 - 12.99 12.50 - 12.99 13.00 - 13.49 13.00 - 13.49 13.50 - 13.99 13.50 - 13.99 14.00 - 14.49 14.00 - 14.49 14.50 - 14.99 14.50 - 1499 15.00 - 15.49 15.00 - 15.49 15.50 - 15.99 15.50 - 15.99 16.00 - 16.49 16.00 - 16.49 16.50 - 16.99 16.50 - 16.99 17.00 - 17.49 17.00 - 17.49 17.50 - 17.99 17.50 - 17.99 18.00 - 18.49 18.00 - 18.49 18.50 - 18.99 18.50 - 18.99 19.00 - 19.49

10.70 10.70 11.20 11.20 11.70 11.70 12.20 12.20 12.70 12.70 1..20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70

147.00 147.00 151.00 151.00 156.00 156.00 160.00 160.00 164.00 164.00 169.00 169.00 173.00 173.00 180.00 180.00 185.00 185.00 189.00 189.00 193.00 193.00 198.00 198.00 202.00 202.00 206.00 206.00 211.00 211.00 217.00 217.00 221.00

82.60 82.60 86.10 86.10 89.70 89.70 93.30 93.30 96.90 96.90 100.60 100.60 104.20 104.20 107.80 107.80 111.30 111.30 114.90 114.90 118.90 118.90 122.10 122.10 125.80 125.80 129.40 129.40 132.90 132.90 136.50 136.50 140.10

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00

Availability • m

• m

• • Australian stock item m

German stock item

Guhring no.

4109

DIN 6535-HE

h l2

l3 l1

Code no.

190 195 195 200 200 205 205 210 210 215 215 220 220 225 225 230 230 235 235 240 240 245 245 250 250 255 255 260 260 265 265 270 270

incl. WP l1*

l2 max

19.05 20.00 19.05 20.00 19.05 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75

18.70 19.20 19.20 19.70 19.70 20.20 20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.20 22.70 22.70 23.20 23.20 23.70 23.70 24.20 24.20 24.70 24.70 25.20 25.20 25.70 25.70 26.20 26.20 26.70 26.70

222.00 226.00 226.00 230.00 230.00 243.00 243.00 247.00 247.00 251.00 251.00 255.00 255.00 260.00 260.00 264.00 264.00 269.00 269.00 273.00 273.00 277.00 277.00 282.00 282.00 291.00 291.00 297.00 297.00 301.00 301.00 306.00 306.00

140.10 143.70 143.70 147.30 147.30 151.00 151.00 154.60 154.60 158.10 158.10 161.70 161.70 165.30 165.30 168.90 168.90 172.50 172.50 176.10 176.10 179.70 179.70 183.30 183.30 186.90 186.90 190.00 190.00 194.00 194.00 197.20 197.20

50.00 50.00 50.00 50.00 50.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Availability m

• m

•

DRILLS

Holder Size

Interchangeable Insert Holders HT 800 WP - 7 x D

• m m m

• m

• Australian stock item m

German stock item

Guhring no.

4109

DIN 6535-HE

l4 d1

Interchangeable Insert Holders HT 800 WP - 7 x D

h l2

l3 l1

Code no.

DRILLS

27,500 27,505 28,000 28,005 28,500 28,505 29,000 29,005 29,500 29,505 30,000 30,005 30,500 30,505 31,000 31,005 31,500 31,505

Holder Size 275 275 280 280 285 285 290 290 295 295 300 300 305 305 310 310 315 315

incl. WP l1*

l2 max

32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75 32.00 31.75

27.20 27.20 27.70 27.70 28.20 28.20 28.70 28.70 29.20 29.20 29.70 29.70 30.20 30.20 30.70 30.70 31.20 31.20

310.00 310.00 314.00 314.00 318.00 318.00 323.00 323.00 327.00 327.00 332.00 332.00 336.00 336.00 340.00 340.00 344.00 344.00

200.80 200.80 204.40 204.40 208.40 208.40 212.50 212.50 215.10 215.10 218.60 218.60 222.20 222.20 225.80 225.80 229.40 229.40

60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Availability m m

• m m m

• Australian stock item m

German stock item

Guhring no.

4110

DIN 6535-HE

h l2

l3 l1

Code no.

110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 155 160 160 165 165 170 170 175 175 180 180 185 185 190

incl. WP l1*

l2 max

10.70 10.70 11.20 11.20 11.70 11.70 12.20 12.20 12.70 12.70 13.20 13.20 13.70 13.70 14.20 14.20 14.70 14.70 15.20 15.20 15.70 15.70 16.20 16.20 16.70 16.70 17.20 17.20 17.70 17.70 18.20 18.20 18.70

182.00 182.00 187.00 187.00 194.00 194.00 199.00 199.00 205.00 205.00 211.00 211.00 217.00 217.00 225.00 225.00 232.00 232.00 237.00 237.00 243.00 243.00 249.00 249.00 255.00 255.00 260.00 260.00 267.00 267.00 274.00 274.00 280.00

117.10 117.10 122.10 122.10 127.20 127.20 132.30 132.30 137.50 137.50 142.50 142.50 147.70 147.70 152.80 152.80 157.80 157.80 162.90 162.90 168.00 168.00 173.10 173.10 178.30 178.30 183.50 183.50 188.40 188.40 193.50 193.50 198.70

45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 48.00 50.00 50.00 50.00

Availability m m m m m m m m m m m m m m m m m m m m m m

DRILLS

11.000 11.005 11.500 11.505 12.000 12.005 12.500 12.505 13.000 13.005 13.500 13.505 14.000 14.005 14.500 14.505 15.000 15.005 15.500 15.505 16.000 16.005 16.500 16.505 17.000 17.005 17.500 17.505 18.000 18.005 18.500 18.505 19.000

Holder Size

Interchangeable Insert Holders HT 800 WP - 10 x D

m m m m m m m m m m m

â&#x20AC;˘ Australian stock item m

German stock item

Guhring no.

4110

DIN 6535-HE

l4 d1

Interchangeable Insert Holders HT 800 WP - 10 x D

h l2

l3 l1

Code no.

DRILLS

19.005 19.500 19.505 20.000 20.005 20.500 20.505 21.000 21.005 21.500 21.505 22.000 22.005 22.500 23.000 23.500 24.000 24.500 25.000 25.500 26.000 26.500 27.000 27.500 28.000 28.500 29.000 29.500 30.000 30.500 31.000 31.500

Holder Size 190 195 195 200 200 205 205 210 210 215 215 220 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 305 310 315

incl. WP l1*

l2 max

19.00 - 19.49 19.50 - 19.99 19.50 - 19.99 20.00 - 20.49 20.00 - 20.49 20.50 - 20.99 20.50 - 20.99 21.00 - 21.49 21.00 - 21.49 21.50 - 21.99 21.50 - 21.99 22.00 - 22.49 22.00 - 22.49 22.50 - 22.99 23.00 - 23.49 23.50 - 23.99 24.00 - 24.49 24.50 - 24.99 25.00 - 25.49 25.50 - 25.99 26.00 - 26.49 26.50 - 26.99 27.00 - 27.49 27.50 - 27.99 28.00 - 28.49 28.50 - 28.99 29.00 - 29.49 29.50 - 29.99 30.00 - 30.49 30.50 - 30.99 31.00 - 31.49 31.50 - 31.99

19.05 20.00 19.05 20.00 19.05 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.40 25.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00

18.70 19.20 19.20 19.70 19.70 20.20 20.20 20.70 20.70 21.20 21.20 21.70 21.70 22.20 22.70 23.20 23.70 24.20 24.70 25.20 25.70 26.20 26.70 27.20 27.70 28.20 28.70 29.20 29.70 30.20 30.70 31.20

280.00 286.00 286.00 292.00 292.00 306.00 306.00 312.00 312.00 317.00 317.00 323.00 323.00 329.00 335.00 341.00 347.00 352.00 359.00 369.00 377.00 382.00 388.00 394.00 400.00 405.00 412.00 418.00 424.00 429.00 435.00 441.00

198.70 203.70 203.70 208.90 208.90 214.00 214.00 219.10 219.10 224.20 224.20 229.30 229.30 234.40 239.50 244.60 249.70 254.80 259.90 265.00 270.00 275.00 280.10 285.20 290.30 295.40 300.50 305.60 310.60 315.70 320.80 325.90

50.00 50.00 50.00 50.00 50.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 56.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

Availability m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m

â&#x20AC;˘ Australian stock item m

German stock item

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Nano FIRE

Nano A

Application Surface finish Tolerance

Interchangeable Inserts HT 800 WP

Code no.

for drill.

for pilot.

holder size

110 110 115 115 115 115 115 120 120 120 120 125 125 125 125 125 130 130 130 140 140 140 140 140 140 140 140 140 140 145 145 145 145

110 110 110 110 110 110 110 120 120 120 120 120 120 120 120 120 130 130 130 130 130 130 130 130 140 140 140 140 140 140 140 140 140

11.00 11.20 11.50 11.51 11.70 11.80 11.91 12.00 12.10 12.20 12.30 12.50 12.60 12.70 12.80 12.90 13.00 13.10 13.49 13.50 13.60 13.70 13.80 13.89 14.00 14.10 14.29 14.40 14.50 14.60 14.68 14.70 14.80

2.10 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.70 2.70 2.70 2.70

4.50 4.50 4.50 4.50 4.50 4.50 4.50 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.50 5.50 5.50 5.50 5.50 5.50 5.50 5.50 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00

7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.70 7.70 7.70 7.70 7.70 7.70 7.70 7.70 7.70 8.50 8.50 8.50 8.50 8.50 8.50 8.50 8.50 9.60 9.60 9.60 9.60 9.60 9.60 9.60 9.60 9.60

Availability • • •

m m

•

• •

•

DRILLS

11,000 11,200 11,500 11,510 11,700 11,800 11,910 12,000 12,100 12,200 12,300 12,500 12,600 12,700 12,800 12,900 13,000 13,100 13,490 13,500 13,600 13,700 13,800 13,890 14,000 14,100 14,290 14,400 14,500 14,600 14,680 14,700 14,800

• Australian stock item m

German stock item

Interchangeable Inserts HT 800 WP

Interchangeable Inserts HT 800 WP Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Nano FIRE

Nano A

Application Surface finish Tolerance

Code no.

DRILLS

15,000 15,080 15,100 15,200 15,300 15,480 15,500 15,600 15,700 15,800 15,870 16,000 16,270 16,500 16,670 17,000 17,070 17,460 17,500 17,600 17,860 18,000 18,260 18,500 18,650 19,000 19,050 19,250 19,450 19,500 19,600 19,840 20,000

for drill.

for pilot.

holder size

150 150 150 150 150 150 155 155 155 155 155 160 160 165 165 170 170 170 175 175 175 180 180 185 185 190 190 190 190 195 195 195 200

140 140 140 140 140 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 180 180 180 180 180 180 180 180 180 180 180 180

15.00 15.08 15.10 15.20 15.30 15.48 15.50 15.60 15.70 15.80 15.87 16.00 16.27 16.50 16.67 17.00 17.07 17.46 17.50 17.60 17.86 18.00 18.26 18.50 18.65 19.00 19.05 19.25 19.45 19.50 19.60 19.84 20.00

2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.00 3.00 3.10 3.10 3.10 3.20 3.20 3.30 3.30 3.40 3.40 3.40 3.50 3.50 3.60 3.60 3.60 3.60 3.70 3.70

6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 9.00

9.80 9.80 9.80 9.80 9.80 9.80 9.80 9.80 9.80 9.80 9.80 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 12.60 13.90

Availability m

•

• •

m m

•

• •

•

• •

•

• • •

• • m

•

• Australian stock item m

German stock item

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Nano FIRE

Nano A

Application Surface finish Tolerance

Interchangeable Inserts HT 800 WP

Code no.

for drill.

for pilot.

holder size

200 205 205 210 210 210 210 215 215 220 220 225 225 230 230 230 235 235 240 240 240 245 245 250 250 255 255 255 255 260 260 260 260

200 200 200 200 200 200 200 200 200 220 220 220 220 220 220 220 220 220 240 240 240 240 240 240 240 240 240 240 240 260 260 260 260

24.24 20.50 20.64 21.00 21.03 21.10 21.43 21.50 21.83 22.00 22.22 22.50 22.62 23.00 23.02 23.42 23.50 23.81 24.00 24.10 24.21 24.50 24.61 25.00 25.40 25.50 25.67 25.70 25.81 26.00 26.19 26.50 26.59

3.70 3.80 3.80 3.90 3.90 3.90 3.90 4.00 4.00 4.10 4.10 4.10 4.20 4.20 4.20 4.30 4.30 4.40 4.40 4.40 4.50 4.50 4.50 4.60 4.70 4.70 4.70 4.70 4.70 4.80 4.80 4.90 4.90

9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 11.00 12.00 12.00 12.00 12.00

13.90 13.90 13.90 13.90 13.90 13.90 13.90 13.90 13.90 15.30 15.30 15.30 15.30 15.30 15.30 15.30 15.30 15.30 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 15.80 20.00 20.00 20.00 20.00

Availability m

•

• • •

•

• •

•

DRILLS

20,240 20,500 20,640 21,000 21,030 21,100 21,430 21,500 21,830 22,000 22,220 22,500 22,620 23,000 23,020 23,420 23,500 23,810 24,000 24,100 24,210 24,500 24,610 25,000 25,400 25,500 25,670 25,700 25,810 26,000 26,190 26,500 26,590

• Australian stock item m

German stock item

Interchangeable Inserts HT 800 WP

Interchangeable Inserts HT 800 WP Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Nano FIRE

Nano A

Application Surface finish Tolerance

Code no.

DRILLS

27,000 27,500 27,700 27,780 28,000 28,180 28,500 28,580 29,000 29,370 29,500 29,770 30,000 30,160 30,500 30,960 31,000 31,500 31,750 32,000 32,500 32,540 34,940 33,000 33,340 33,500 34,000 34,130 34,500 34,930 35,000 35,500 35,720

for drill.

for pilot.

holder size

270 270 270 270 280 280 280 280 290 290 290 290 300 300 300 300 310 310 310 320 320 320 320 330 330 330 340 340 340 340 350 350 350

260 260 260 260 280 280 280 280 280 280 280 280 300 300 300 300 300 300 300 320 320 320 320 320 320 320 320 320 320 320 360 360 360

27.00 27.50 27.70 27.78 28.00 28.18 28.50 28.58 29.00 29.00 29.50 29.77 30.00 30.16 30.50 30.96 31.00 31.50 31.75 32.00 32.50 32.54 34.94 33.00 33.34 33.50 34.00 34.13 34.50 34.93 35.00 35.50 35.72

5.00 5.10 5.10 5.10 5.10 5.20 5.20 5.30 5.30 5.40 5.40 5.50 5.50 5.50 5.60 5.70 5.70 5.80 5.80 5.90 6.00 6.00 6.00 6.10 6.10 6.10 6.20 6.30 6.30 6.40 6.40 6.50 6.50

12.00 12.00 12.00 12.00 13.00 13.00 13.00 13.00 13.00 13.00 13.00 13.00 14.00 14.00 14.00 14.00 14.00 14.00 14.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00 15.00

20.00 20.00 20.00 20.00 20.70 20.70 20.70 20.70 20.70 20.70 20.70 20.70 22.30 22.30 22.30 22.30 22.30 22.30 22.30 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10 23.10

Availability •

•

• •

•

• •

m m

•

• Australian stock item m

German stock item

Guhring no.

4112

4115

Standard

Guhring std.

Tool material

Solid carbide

Steel

Stainless Steel

Nano FIRE

Nano A

Application Surface finish Tolerance

Interchangeable Inserts HT 800 WP

Code no. 36,000 36,500 36,510 37,000 37,310 37,500 38,000 38,100 38,460 38,500 39,000 39,500 40,000

for drill.

for pilot.

holder size

360 360 360 370 370 370 380 380 380 380 390 390 390

360 360 360 360 360 360 360 360 360 360 360 360 360

36.00 36.50 36.51 37.00 37.31 37.50 38.00 38.10 38.46 38.50 39.00 39.50 40.00

6.60 6.70 6.70 6.80 6.80 6.90 7.00 7.00 7.00 7.10 7.10 7.20 7.30

16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00

23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90 23.90

Availability â&#x20AC;˘

DRILLS â&#x20AC;˘ Australian stock item m

German stock item

Cutting speed recommendation - HSS - HSCO DRILLING

CUTTING SPeed recommendation HSS - HSCO DRILLING

HSS

Tool Material

HSS

>Ø 2,36

Surface Finish

HSS

>Ø 2,36

223

205

217

9651

Type Guhring No.

HSS

>Ø 2,36

Feed Column No. Drill ø mm

f (mm/rev) 2.00

0.020

0.025

0.032

0.040

0.050

0.063

0.080

0.100

0.125

2.50

0.025

0.032

0.040

0.050

0.063

0.080

0.100

0.125

0.160

3.15

0.032

0.040

0.050

0.063

0.080

0.100

0.125

0.160

4.00

0.040

0.050

0.063

0.080

0.100

0.125

0.160

0.200

5.00

0.040

0.050

0.063

0.080

0.100

0.125

0.160

0.200

0.250

6.30

0.050

0.063

0.080

0.100

0.125

0.160

0.200

0.250

0.315

8.00

0.063

0.080

0.100

0.125

0.160

0.200

0.250

0.315

10.00

0.080

0.100

0.125

0.160

0.200

0.250

0.315

0.400

12.50

0.080

0.100

0.125

0.160

0.200

0.250

0.315

0.400

0.500

16.00

0.100

0.125

0.160

0.200

0.250

0.315

0.400

0.500

0.630

20.00

0.125

0.160

0.200

0.250

0.315

0.400

0.500

0.630

25.00

0.160

0.200

0.250

0.315

0.400

0.500

0.630

0.800

Application

vc m/ min

Feed col. no.

vc m/ min

Feed col. no.

vc m/ min

Feed col. no.

≤ 500

> 500-850

≤ 850

850-1000

≤ 700

700-850

≤ 850

Tens. Strength (N/mm2)

Common Structural Steels

Mild steel, Grade 250 plate, Grade 350 plate

Unalloyed Heat-Treatable Steels

1035, 1045, 1055, 1060, 1025

DIN 340

Feed col. no.

Material Examples

1020, S1214, S1213, S12L13, S12L14

DIN 338

vc m/ min

Material Group

Free-Cutting Steels

DIN 1897

Internal Cooling

Hardness

850-1000 Alloyed Heat-Treatable Steels

3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

850-1000 1000-1200

Unalloyed Case Hardened Steels

1010, 1015

≤ 750

Alloyed Case Hardened Steels

3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A

850-1000

Nitriding Steels

1.8504 34CrAI6, 1.8519 31CrMo V9, 1.8550 34CrAINi7

≥ 850-1000

1000-1200 1000-1200

Tool Steels

H11, H13, P20, D2, D3

≤ 850

850-1000 High Speed Steels

M2, M3, M35, M45

Spring Steels

5155, 6150, 9255

Stainless Steels, Sulphured 410S, 430F, 630

≤ 330 HB

Austenitic

302, 303, 304, 310, 316, 316Ti, 321

≤ 850

Martensitic

410, 410X, 416, 420, 420C, 431, 440C

≤ 850

Special Alloys

Nimonic, Inconel, Monel, Hastelloy, Bisalloy

≤ 1200

Cast Iron

GG10, GG15, GG20, GG25, GG30, GG35, GG40

≤ 240 HB

≤ 300 HB

DRILLS

Spheroidal Graphite and Malleable Cast Iron

GGG40, GGG50, GGG60, GGG70, 32510, 50005, Nodular Iron

≤ 240 HB

≤ 300 HB

Chilled Cast Iron

≤ 350 HB

Ti and Ti-alloys

3.7024 Ti99,5, 3.7114 TiAI5Sn2,5, 3.7124 TiCu2

≤ 850

3.7154 TiAI6Zr5, 3.7164 TiAI6V4, 3.7184 TiAI4Mo4Sn2,5, -TiAI8Mo 1V1

850-1200

AI and Ti-alloys

3.0255 AI99,5, 3.2315 AIMgSi1, 3.3515 AIMg1

≤ 400

AI Wrought Alloys

3.0615 AIMgSiPb, 3.1325 AICiMg1, 3.3245 AIMg3Si, 3.4365 AIZnMgCu1,5 ≤ 450

AI Cast Alloys ≤ 10 % Si

3.2131 G-AISi5Cu1, 3.2153 G-AISi7Cu3, 3.2573 G-AISi9

≤ 600

AI Cast Alloys >10 % Si

3.2581 G-AISi12, 3.2583 G-AISi12Cu, -GAISi12CuNiMg

≤ 600

Magnesium Alloys

MgMn2, G-MgAI8Zn1, G-MgAI6Zn3

≤ 450

Copper, Low-Alloyed

2.0070 SE-Cu, 2.1020 CuSn6, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb

≤ 450

Brass, Short-Chipping

2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2

≤ 600

Brass, Long-Chipping

2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5

≤ 600

Bronze, Short-Chipping

2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

≤ 600

2.0790 CuNi18Zn19Pb

> 600 -850

2.0916 CuAI5, 2.0960 CuAI9Mn, 2.1050 CuSn10

≤ 850

2.0980 CuAI11Ni, 2.1247 CuBe2

850-1000

Bronze, Long-Chipping

≥ 650-1000

70 70

Duroplastics

Bakelit, Resopal, Pertinax, Moltopren

Thermoplastics

Plexiglas, Hostalen,Novodur, Makralon

HSCO

HSS-E-PM

HSCO

GV120

GU500DZ

659

5520

GU500DZ

GT500DZ

5523

5536

5522

1228

HSCO

HSS

GT100

658

301

502

242

581

503

243

557

504

244

5537

HSS

GT100

380

245

293

526

298

527

299 565

DIN 1897

DIN 338

DIN 340

DIN 338

DIN 1899

DIN 1869

Guhring Std. Guhring Std. Guhring Std.

vc Feed m/ col. min no.

Feed vc col. m/min no.

DIN 345

Guhring Std.

DIN 1870

Feed vc col. m/min no.

vc Feed m/ col. min no. 5

20 16

80 80

DRILLS

DIN 1897

Cutting speed recommendation - HSS - HSCO DRILLING

HSCO

Cutting speed recommendation - CARBIDE DRILLING

CUTTING SPeed recommendation carbide DRILLING

Tool Material

Carbide

RT100U

2463

5514

Surface Finish Type Guhring No.

Feed Column No. Drill ø mm

2.00

0.020

0.025

0.032

0.040

0.050

0.063

0.080

0.100

0.125

2.50

0.025

0.032

0.040

0.050

0.063

0.080

0.100

0.125

0.160

3.15

0.032

0.040

0.050

0.063

0.080

0.100

0.125

0.160

4.00

0.040

0.050

0.063

0.080

0.100

0.125

0.160

0.200

5.00

0.040

0.050

0.063

0.080

0.100

0.125

0.160

0.200

0.250

6.30

0.050

0.063

0.080

0.100

0.125

0.160

0.200

0.250

0.315

8.00

0.063

0.080

0.100

0.125

0.160

0.200

0.250

0.315

10.00

0.080

0.100

0.125

0.160

0.200

0.250

0.315

0.400

12.50

0.080

0.100

0.125

0.160

0.200

0.250

0.315

0.400

0.500

16.00

0.100

0.125

0.160

0.200

0.250

0.315

0.400

0.500

0.630

20.00

0.125

0.160

0.200

0.250

0.315

0.400

0.500

0.630

25.00

0.160

0.200

0.250

0.315

0.400

0.500

0.630

0.800

Internal Cooling

f (mm/rev)

YES

DIN 6539

DIN 6537

vc Feed m/min col.no.

HE Standard

YES

Coolant Soluble Oil Oil Air

Material Group

Material Examples

Common Structural Steels

Mild steel, Grade 250 plate, Grade 350 plate

Free-Cutting Steels Unalloyed Heat-Treatable Steels

Alloyed Heat-Treatable Steels

1020, S1214, S1213, S12L13, S12L14 1035, 1045, 1055, 1060, 1025

3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

Tens. Strength Hardness (N/mm2)

Coolant

≤ 500

104

130

> 500-850

110

≤ 850

104

145

850-1000

110

≤ 700

104

120

700-850

110

850-1000

105

850-1000

105

100

6 8

1000-1200 Unalloyed Case Hardened Steels

1010, 1015

≤ 750

104

130

Alloyed Case Hardened Steels

3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A

850-1000

120

1000-1200

1.8504 34CrAI6, 1.8519 31CrMo V9, 1.8550 34CrAINi7

≥ 850-1000

Nitriding Steels

1000-1200 Tool Steels

H11, H13, P20, D2, D3

≤ 850

850-1000

High Speed Steels

M2, M3, M35, M45

Spring Steels

5155, 6150, 9255

≥ 650-1000 32

Stainless Steels, Sulphured

410S, 430F, 630

≤ 850

Austenitic

302, 303, 304, 310, 316, 316Ti, 321

≤ 850

Martensitic

410, 410X, 416, 420, 420C, 431, 440C

≤ 850

Hardened Steels

≤ 330 HB

≤ 40-48 HRC > 48-60 HRC

Special Alloys

Nimonic, Inconel, Monel, Hastelloy, Bisalloy

Cast Iron

GG10, GG15, GG20, GG25, GG30, GG35, GG40

≤ 1200

DRILLS

≤ 240 HB

117

210

≤ 300 HB

104

155

8 7

Spheroidal Graphite and Malleable Cast Iron

GGG40, GGG50, GGG60, GGG70, 32510, 50005, Nodular Iron

≤ 240 HB

155

≤ 300 HB

104

125

Chilled Cast Iron

≤ 350 HB

Ti and Ti-alloys

3.7024 Ti99,5, 3.7114 TiAI5Sn2,5, 3.7124 TiCu2

≤ 850

3.7154 TiAI6Zr5, 3.7164 TiAI6V4, 3.7184 TiAI4Mo4Sn2,5, -TiAI8Mo 1V1

850-1200

AI and Ti-alloys

3.0255 AI99,5, 3.2315 AIMgSi1, 3.3515 AIMg1

≤ 400

260

AI Wrought Alloys

3.0615 AIMgSiPb, 3.1325 AICiMg1, 3.3245 AIMg3Si, 3.4365 AIZnMgCu1,5 ≤ 450

260

AI Cast Alloys ≤ 10 % Si

3.2131 G-AISi5Cu1, 3.2153 G-AISi7Cu3, 3.2573 G-AISi9

≤ 600

195

220

AI Cast Alloys >10 % Si

3.2581 G-AISi12, 3.2583 G-AISi12Cu, -GAISi12CuNiMg

≤ 600

156

180

Magnesium Alloys

MgMn2, G-MgAI8Zn1, G-MgAI6Zn3

≤ 450

234

260

Copper, Low-Alloyed

2.0070 SE-Cu, 2.1020 CuSn6, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb

≤ 450

104

105

Brass, Short-Chipping

2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2

≤ 600

234

270

Brass, Long-Chipping

2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5

≤ 600

234

180

Bronze, Short-Chipping

2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

≤ 600

156

105

2.0790 CuNi18Zn19Pb

> 600 -850

156

2.0916 CuAI5, 2.0960 CuAI9Mn, 2.1050 CuSn10

≤ 850

2.0980 CuAI11Ni, 2.1247 CuBe2

850-1000

Bronze, Long-Chipping

100

Duroplastics

Bakelit, Resopal, Pertinax, Moltopren

Thermoplastics

Plexiglas, Hostalen,Novodur, Makralon

Kevlar

Glass, carbon Concentr. Plastics

GFK/CFK

104

Carbide

RT100U

RT100

RT100T

HT800WP

RT100U

2464

5515

5511

5512

5525

6511

4112

5516

732

723

6513

4115

730

5517

YES

6514 -

YES

Guhring std.

DIN 537

DIN 6537

Guhring std.

DIN 6539

Guhring std.

vc Feed m/min col.no.

Feed vc m/min col.no.

vc Feed m/min col.no.

100

130

145

110

130

110

120

110

100

145

170

120

100-120

130

110

145

120

100

110

100

120

130

110

130

110

125

110

125

105

120

100

110

105

120

110

100

105

110

100

130

145

110

130

120

110

100

105

110

100

105

100

105

100

6-7

4 3

65 65

5 4

100

60-80

2-3

100

210

195

140

120

100

155

160

100

145

140

120

125

130

100

120

260

310

100

200

260

310

200

195

235

260

220

150

155

170

220

180

120

235

260

280

200

180

100

105

125

120

180

235

270

325

120

100

150

180

235

180

220

120

180

155

105

125

180

120

155

105

120

180

120

150

DRILLS

20 115

100

Cutting speed recommendation - CARBIDE DRILLING

Carbide

150 3

GUN DRILLS

Single-fluted gun drill EB 100 solid carbide

suitable for almost every material

• Stock program Ø 1.2 - 12.0 mm • Special solutions Ø 0.9 - 12.0 mm

Single-fluted gun drill EB 80 with brazed carbide head

suitable for almost every material

• Stock program Ø 3.97 - 12.7 mm • Special solutions Ø 2.0 - 40.0 mm • Quick service Ø 2.0 - 22.0 mm

Double-fluted gun drill ZB 80 with brazed carbide head

suitable for cast iron, aluminium and short- • Stock program Ø 8.0 - 12.0 mm chipping non-ferrous • Special solutions Ø 6.0 - 27.0 mm metals

Single-fluted gun drill EB 800 with interchangeable parts

suitable for almost every material

NEW: Also for 25/50/75 x D

NEW: Now • Stock program Ø 16.0 - 24.0 mm special solutions • Special solutions Ø 12.0 - 40.0 mm from Ø 12.0 mm

Additional technical parameters The range of drivers introduced below is available ex stock. However, it only represents a small selection of drivers from our complete range. We naturally also produce individual drivers of the highest precision to customer drawings. EB 100 requires drivers with positioning lugs. Further information on request.

Drivers for deep drilling machines 5

l1 40 40 40 45 70 70

l2 24 24 24 31.2 34 34

l3 45 55 78

code no.

5.1 5.2 5.3

10 16 25

60 80 100

20 28 50

9.1 9.2 9.3 9.4 9.5 9.6 9.7

8 10 12 16 20 35 32

36 40 45 48 50 57 60

code no. 10.1 10.2 10.3 10.4 10.5 10.6 10.7

d1 8 10 12 16 20 25 32

l1 36 40 45 48 50 56 60

l1 l3

Drivers to VDI draft

12 l1

code no.

d1 (inch)

2.1 2.2 2.3

16 16 16

50 50 50

47 47 47

55 70

6.1 6.2

1/2 3/4

38 70

code no.

12.1 12.2 12.3

10 16 25

68 90 112

Drivers to Speed-Bit-System

code no.

3.1

100

7.1 7.2

16 20

112 126

73 82

4.1

19.05

36 40 45 48 50 56 60 70

11 l1

code no.

8 10 12 16 20 25 32 40

d1 l1

8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8

code no.

GUN DRILLS

code no.

d1 10 10 10 16 25 25

l1 l3

code no. 1.1 1.2 1.3 1.4 1.5 1.6

Drivers to DIN 6535

Drivers to DIN 1835

Gun drills - Additional technical parameters

Gun drills

code no.

13.1 13.2

16 25

40 50

16 25

code no.

11.1 11.2 11.3 11.4 11.5

8 10 12 16 20

36 40 45 48 50

Guhring no. Standard Tool material

5639 Guhring std. Carbide

Surface Drilling depth Cutting direction Tolerance

20 x D rh h5

*Sizes above dia 13mm all uncoated

Gun drills EB 80 - 20 x D

l3 l1

GUN DRILLS 74

4.000 5.000 6.000 8.000 10.000 12.000 13.000 13.500 14.000 14.500 15.000 15.500 16.000 17.000 18.000 19.000 20.000 22.000 25.000 30.000 32.000

12.00 16.00 16.00 16.00 20.00 20.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00

150.00 180.00 210.00 260.00 320.00 370.00 405.00 408.00 420.00 433.00 445.00 458.00 470.00 495.00 520.00 545.00 570.00 620.00 695.00 820.00 870.00

100.00 130.00 160.00 210.00 260.00 310.00 325.00 338.00 350.00 363.00 375.00 388.00 400.00 425.00 450.00 475.00 500.00 550.00 625.00 750.00 800.00

45.00 48.00 48.00 48.00 50.00 50.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

Availability • • • • • • • • • • • • • • • • • • • • •

Guhring no. Standard Tool material

5641 Guhring std. Carbide

Surface Drilling depth Cutting direction Tolerance

40 x D rh h5

*Sizes above dia 13mm all uncoated

Gun drills EB 80 - 40 x D

l3 l1

4.000 5.000 6.000 8.000 10.000 12.000 13.000 13.500 14.000 14.500 15.000 15.500 16.000 17.000 18.000 19.000 20.000 22.000 25.000 30.000 32.000

12.00 16.00 16.00 16.00 20.00 20.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00

230.00 280.00 320.00 420.00 510.00 600.00 655.00 678.00 700.00 723.00 745.00 768.00 790.00 835.00 880.00 925.00 970.00 1060.00 1195.00 1420.00 1510.00

185.00 232.00 272.00 372.00 460.00 550.00 585.00 608.00 630.00 653.00 675.00 698.00 720.00 765.00 810.00 855.00 900.00 990.00 1125.00 1350.00 1440.00

45.00 48.00 48.00 48.00 50.00 50.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

Availability • • • • • • • • • • • • • • • • • • • • •

GUN DRILLS

Guhring no. Standard Tool material

5642 Guhring std. Carbide

Surface Drilling depth Cutting direction Tolerance

80 x D rh h5

*Sizes above dia 11.95mm all uncoated

Gun drills EB 80 - 80 x D

l3 l1

GUN DRILLS 76

4.950 5.950 7.950 9.950 11.950 12.950 13.450 13.950 14.450 14.950 15.450 15.950 16.950 17.950 18.950 19.950 21.950 24.95

16.000 16.000 16.000 20.000 20.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000 25.000

480.00 560.00 740.00 910.00 1080.00 1170.00 1215.00 1255.00 1300.00 1340.00 1383.00 1425.00 1510.00 1600.00 1680.00 1765.00 1940.00 2190.00

432.00 512.00 692.00 860.00 1030.00 1101.00 1143.00 1186.00 1228.00 1271.00 1313.00 1356.00 1441.00 1526.00 1611.00 1696.00 1866.00 2121.00

48.00 48.00 48.00 50.00 50.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00

Availability • • • • • • • • • • • • • • • • • •

Feed Column No. f (mm/rev)

Tool Material

Drill ø mm

1.50

0.002

0.004

0.006

0.008

0.012

0.020

0.032

0.045

2.00

0.003

0.005

0.007

0.010

0.016

0.028

0.046

0.055

2.50

0.004

0.006

0.008

0.012

0.018

0.030

0.054

0.070

4.00

0.005

0.007

0.010

0.016

0.025

0.043

0.065

0.085

6.00

0.007

0.009

0.013

0.024

0.035

0.061

0.085

0.120

8.00

0.010

0.014

0.022

0.032

0.045

0.08

0.100

0.150

10.00

0.012

0.016

0.028

0.040

0.055

0.075

0.120

0.160

14.00

0.020

0.025

0.035

0.050

0.065

0.085

0.130

0.180

18.00

0.025

0.030

0.040

0.055

0.070

0.095

0.145

0.200

20.00

0.026

0.035

0.045

0.060

0.080

0.110

0.180

0.250

24.00

0.027

0.036

0.047

0.065

0.085

0.130

0.185

0.300

28.00

0.028

0.038

0.049

0.068

0.090

0.140

0.195

0.350

30.00

0.030

0.040

0.050

0.070

0.100

0.150

0.200

0.400

35.00

0.035

0.045

0.055

0.075

0.129

0.180

0.250

0.450

40.00

0.040

0.050

0.060

0.080

0.150

0.200

0.300

0.500

Material Group

Material Examples

Common Structural Steels

Mild steel, Grade 250 plate, Grade 350 plate

Free-Cutting Steels Unalloyed Heat-Treatable Steels

Alloyed Heat-Treatable Steels

1020, S1214, S1213, S12L13, S12L14 1035, 1045, 1055, 1060, 1025

3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

Unalloyed Case Hardened Steels 1010, 1015 Alloyed Case Hardened Steels Nitriding Steels Tool Steels

3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A 1.8504 34CrAI6, 1.8519 31CrMo V9, 1.8550 34CrAINi7 H11, H13, P20, D2, D3

Type

Diameter Range

Carbide Head

EB 80

Single-fluted gun drill

2.0 ... 40.0

5639

5641

20 X D

40 X D, 80 X D

vc Feed m/min col.no.

Guhring No.

5642 Depth

Coolant Tens. Strength (N/mm2)

Soluble Oil Hardness

Oil

Air

RecomCool- mended ant coating*

≤ 500

100

> 500-850

≤ 850

850-1000

≤ 700

700-850

850-1000

1000-1200

≤ 750

850-1000

1000-1200

≥ 850-1000

1000-1200

≤ 850

850-1000

≥ 650-1000

High Speed Steels

M2, M3, M35, M45

Spring Steels

5155, 6150, 9255

Stainless Steels, Sulphured

410S, 430F, 630

≤ 850

Austenitic

302, 303, 304, 310, 316, 316Ti, 321

≤ 850

Martensitic

410, 410X, 416, 420, 420C, 431, 440C

≤ 850

Hardened Steels

≤ 40-48 HRC

> 48-60 HRC

≤ 240 HB

≤ 300 HB

Special Alloys

Nimonic, Inconel, Monel, Hastelloy, Bisalloy

Cast Iron

GG10, GG15, GG20, GG25, GG30, GG35, GG40

≤ 330 HB

≤ 1200

GGG40, GGG50, GGG60, GGG70, 32510, 50005, Nodular Iron

≤ 240 HB ≤ 300 HB

Chilled Cast Iron

≤ 350 HB

Ti and Ti-alloys

3.7024 Ti99,5, 3.7114 TiAI5Sn2,5, 3.7124 TiCu2

≤ 850

3.7154 TiAI6Zr5, 3.7164 TiAI6V4, 3.7184 TiAI4Mo4Sn2,5, -TiAI8Mo 1V1

850-1200

AI and Ti-alloys

3.0255 AI99,5, 3.2315 AIMgSi1, 3.3515 AIMg1

≤ 400

150

140

AI Wrought Alloys

3.0615 AIMgSiPb, 3.1325 AICiMg1, 3.3245 AIMg3Si, 3.4365 AIZnMgCu1,5 ≤ 450

120

115

AI Cast Alloys ≤ 10 % Si

3.2131 G-AISi5Cu1, 3.2153 G-AISi7Cu3, 3.2573 G-AISi9

≤ 600

150

140

AI Cast Alloys >10 % Si

3.2581 G-AISi12, 3.2583 G-AISi12Cu, -GAISi12CuNiMg

≤ 600

130

120

Magnesium Alloys

MgMn2, G-MgAI8Zn1, G-MgAI6Zn3

≤ 450

110

100

Copper, Low-Alloyed

2.0070 SE-Cu, 2.1020 CuSn6, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb

≤ 450

Brass, Short-Chipping

2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2

≤ 600

120

115

Brass, Long-Chipping

2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5

≤ 600

Bronze, Short-Chipping

2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

≤ 600

2.0790 CuNi18Zn19Pb

> 600 -850

2.0916 CuAI5, 2.0960 CuAI9Mn, 2.1050 CuSn10

≤ 850

2.0980 CuAI11Ni, 2.1247 CuBe2

850-1000

Bronze, Long-Chipping Duroplastics

Bakelit, Resopal, Pertinax, Moltopren

Thermoplastics

Plexiglas, Hostalen,Novodur, Makralon

Kevlar

Glass, carbon Concentr. Plastics GFK/CFK

GUN DRILLS

Spheroidal Graphite and Malleable Cast Iron

Cutting speed recommendation - GUN DRILLING

CUTTING SPeed recommendation GUN DRILLING

In the machining world, drilling depths of 10 x D and deeper are regarded as deep hole drilling operations, whereby smaller drilling depths can naturally also be produced with gun drills. Advantage is taken of the positive side effects, as for example good surface quality, low deviation from concentricity and optimised alignment accuracy.

Deep hole drilling on conventional machine tools 1. operation - pilo hole

Every conventional machine tool currently on the market can be supplied with high pressure internal cooling and is therefore also suitable for deep hole drilling. The share of gun drills on machining centres, lathes etc. is forever gaining more importance. The process is therefore increasing in popularity in the machining world.

+0,03

L=1,5xD +0,03

workpiece

D +0,01

L=1,5xD

D +0,01

In recent years, internal cooling has established itself for all drilling tools. Coolants are now living up to their name and being supplied via coolant ducts to where they are urgently required. Considerable improvements in tool life and less breakages have been achieved by this measure for twist drills, taps etc.

workpiece

2. operation - deep hole drilling coolant cycle

High pressure cooling -has become a matter of course.

high pressure pump D

The deep hole gun drilling process

The drilling process A brief introduction to the subject of deep hole gun drilling

filter high pressure pump M M

filter

Typical procedure with all gun drills on conventional machine tools:

• production of pilot hole (tol. H8). Enter at low revolutions, approx. 200 rev./min, feed rate approx. 500 mm/min. • setting coolant pressure and speed. • continuous drilling to complete hole depth without wood pecking • switch off coolant supply after reaching hole depth.

Deep hole drilling on machines

• rapid withdrawal with stationary spindle.

Application advice • For drilling depths in excess than 40 x D we recommend the use of two or more gun drills, e. g. Ø 10 x 400 mm and Ø 9.95 x 800 mm.

workpiece workpiece clamping

drilling bush holder drilling bush

coolant cycle

filter

feed drive

• Gun drills for drilling depths of more than 40 x D should enter the pilot hole revolving in the left hand direction.

GUN DRILLS

high pressure pump filter

• For machining of long-chipping materials we recommend the use of gun drills with polished flutes. • Single-fluted gun drills for long-chipping aluminium should be supplied with point grind 180° and coolant chamber.

• Generally we recommend the use of soluble oil with a minimum oil content of 10 %.

All gun drills must have support for the pilot hole. Gun drills must never operate at full speed without support in the machine shop. Deep hole drilling is not a closed book, but can be mastered by anybody as long as certain conditions are adhered to. Recommended cutting rates for the application of Guhring gun drills can be found on the pages for the individual types.

d1 l1

GUN DRILL Fax inquiry / order form

❏ Order

❏ Repeat order, no. of initial order

Deep hole gun drill:

❑ EB 100

Number required:

tool __________________ items insert ________________ items sup. strip _____________ items

❑ EB 80 ❑ polished ❑ fast service

❑ ZB 80 ❑ polished

❑ EB 800

standard collar

driver length

15 mm

EB 100

total length mm

driver

EB 80 ZB 80

❑ flute polished

Drawing of lay-out

photocopy, complete and fax

flute length

GUN DRILL Fax inquiry / order form

❏ Inquiry

photocopy, complete and fax

required in special cases only

❑ no

❑ code-no.:

❑ to enclosed drawing

Coating:

❑ TiN

❑ Fire

❑ TiCN

Workpiece:

drill. depth:______

Machine type:

❑ deep hole drilling machine ❑ pilot hole

❑ conventional machine tool ❑ drilling bush

Coolant:

❑ deep hole drilling oil pressure _______ bar

❑ soluble oil quantity_________ l/min

Company:

❑ TiAlN

hole tolerance:_____________

❑ SuperA

❑ ____________

material/designation: _______________

GUN DRILLS

Driver:

Company stamp:

Telephone/fax: Contact:

Signature:

TAPS

Tens Strength Mpa (N/mm2)

Hardness HB

Structural Steels - Mild Steel, 250 and 350 plate

≤ 850

Free Cutting Steels - 1020, S1214, S1213, S12L13, S12L14 Unalloyed Case Hardened Steels - 1010, 1015

Colour Ring

Material Groups

Cutting Speed Vc m/min * Solid Carbide

HSS-E

HSS-E-PM

10 - 15

15 - 20

30 - 50

≤ 1000

10 - 20

15 - 25

30 - 50

≤ 750

10 - 15

15 - 20

30 - 50

≤ 850

10 - 15

15 - 20

30 - 50

850 - 1200

8 - 12

10 - 15

25 - 40

850 - 1200

8 - 12

10 - 15

25 - 40

Alloyed Tool Steels - H11, H13, P20, D2, D3

≤ 1000

6 - 10

8 - 12

25 - 40

High Speed Tool Steels M2, M3, M35, M45

650 - 1000

6 - 10

8 - 12

25 - 40

Stainless and Acid resistant Steels - Sulphured 410S, 430F, 630

≤ 850

6 - 12

8 - 15

30 - 50

- Austentic -302, 303, 304, 310, 316, 316Ti, 321

≤ 850

6 - 12

8 - 15

30 - 50

- Marttensitic - 410, 410X, 416, 420, 420C, 431, 440C

≤ 850

6 - 12

8 - 15

30 - 50

Structural Steels - Mild Steel, 250 and 350 plate

≤ 800

10 - 15

15 - 20

30 - 50

Free Cutting Steels - 1020, S1214, S1213, S12L13, S12L14

≤ 1000

10 - 20

15 - 25

30 - 50

Case Hardened Steels

≤ 1000

10 - 15

15 - 20

30 - 50

Heat Treatable Steels

≤ 1200

10 - 15

15 - 20

30 - 50

Nitriding Steels

≤ 1200

10 - 15

15 - 20

30 - 50

Un9/9/2008d Heat Treatable Steels - 1035, 1045, 1055, 1060, 1025 Alloyed Case Hardened Steels - 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A Alloyed Heat Treatable Steels - 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

Spheroidal Graphite Cast Iron - GGG40, GGG50, GGG60, GGG70

≤ 240

10 - 20

15 - 25

30 - 50

Aluminium and Al-Alloys

≤ 400

15 - 20

20 - 25

30 - 50

Al Wrought Alloys

≤ 400

15 - 20

20 - 25

30 - 50

Alcast Alloys ≤ 10 % Si

≤ 600

15 - 20

20 - 25

30 - 50

> 10 % Si

≤ 600

15 - 20

20 - 25

25 - 40

≤ 240

15 - 20

20 - 25

30 - 40

≤ 240

15 - 20

20 - 25

30 - 40

≤ 240

15 - 20

20 - 25

30 - 40

Brass Short Chipping

≤ 600

10 - 15

15 - 20

25 - 30

Long Chipping

≤ 600

10 - 15

15 - 20

25 - 30

5 - 10

15 - 20

25 - 30

Magnesium Alloys

≤ 450

30 - 50

Titanium and Ti-Alloys

≤ 1200

Cast Iron - GG10, GG15, GG20, GG25, GG30, GG35, GG40 Spheroidal Graphite Cast Iron - GGG40, GGG50, GGG60, GGG70 Malleable Cast Iron - 32510, 50005, Nodular Iron

Plastics

Ni Alloys

TAPS

RECOMMENDATION CHART FOR TAPS

40 - 60 2-8 2-8

* With Coated Tools Cutting Speed May Be Increased Up To 50%

Metric GUN NOSE taps - HSS-E - HSS-E-PM

METRIC GUN NOSE TAPS THROUGH HOLES

Through hole Guhring no.

803

5736

HSS-E

HSS-E-PM

HSS-E

left hand

DIN 371

Standard Tool material

789

Surface Cutting direction Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

TAPS 82

M 1.4 M 1.6 M 2.0 M 2.5 M 3.0

0.30 0.35 0.40 0.45 0.50

2.50 2.50 2.80 2.80 3.50

2.10 2.10 2.10 2.10 2.70

1.10 1.25 1.60 2.05 2.50

40.00 40.00 45.00 50.00 56.00

7.00 8.00 8.00 9.00 10.00

Availability • • • • •

•

2876

877

805

807

DIN 371 HSS-E

HSS-E-PM

HSS-E

ISO 2 / 6H

8-12

HSS-E-PM rh

HSS-E rh

6-12

10-15

• • •

•

ISO 2 / 6H

8-12

10-15

Metric GUN NOSE taps - HSS-E - HSS-E-PM

804

Availability

• • •

•

TAPS 83

Metric GUN NOSE taps - HSS-E - HSS-E-PM

METRIC GUN NOSE TAPS THROUGH HOLES

Through hole Guhring no.

5733

5736

HSS-E

HSS-E-PM

HSS-E

left hand

Standard Tool material

789

DIN 371

Surface Cutting direction Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

dd11

dd22

SW SW

l2l2

ddkk

l1l1

TAPS 84

M4 M5 M6 M8 M10

0.70 0.80 1.00 1.25 1.50

4.50 6.00 6.00 8.00 10.00

3.40 4.90 4.90 6.20 8.00

3.30 4.20 5.00 6.80 8.50

63.00 70.00 80.00 90.00 100.00

13.00 16.00 19.00 22.00 24.00

Availability • • • • •

• • • • •

5559

5561

5557

5550

DIN 371 HSS-E rh

HSS-E-PM rh

HSS-E rh

10-15

• • • • •

ISO 2 / 6H

8-12

6-12

Metric GUN NOSE taps - HSS-E - HSS-E-PM

5558

Availability • • • • •

• • • • •

TAPS 85

Metric GUN NOSE taps - HSS-E - HSS-E-PM

METRIC GUN NOSE TAPS THROUGH HOLES

Through hole Guhring no.

5716

5736

Standard Tool material

790

DIN 376 HSS-E

HSS-E-PM

HSS-E

Surface Cutting direction

Tolerance

left hand ISO 2 / 6H

Application Cutting speed m/min

10-15

TAPS 86

M6 M7 M8 M 10 M 12 M 14 M 16 M 18 M 20 M 22 M 24 M 30 M 36

1.00 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.50 4.00

4.50 5.50 6.00 7.00 9.00 11.00 12.00 14.00 16.00 18.00 18.00 22.00 28.00

3.40 4.30 4.90 5.50 7.00 9.00 9.00 11.00 12.00 14.50 14.50 18.00 22.00

5.00 6.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 26.50 32.00

80.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00 180.00 200.00

16.00 16.00 18.00 20.00 24.00 26.00 26.00 30.00 32.00 32.00 36.00 40.00 50.00

Availability • • • • • • • • •

• • • • •

• • •

879

2877

817

DIN 376 HSS-E rh

HSS-E-PM rh

HSS-E rh

10-15

• • • • • • • • •

•

ISO 2 / 6H

8-12

6-12

Metric GUN NOSE taps - HSS-E - HSS-E-PM

816

Availability

• • • • • •

• • •

• • • •

TAPS 87

Metric SPIRAL taps - HSS-E - HSS-E-PM

MEtric spiral taps through & Blind holes

Through hole and blind hole Guhring no.

810

5722

HSS-E

HSS-E-PM

HSS-E

left hand

Standard Tool material

786

DIN 371

Surface Cutting direction Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

M 2.0 M 2.5 M 3.0

0.40 0.45 0.50

2.80 2.80 3.50

2.10 2.10 2.70

1.60 2.05 2.50

45.00 50.00 56.00

8.00 9.00 10.00

Availability • • •

•

50º Helix for maximum tool life

TAPS 88

•

909

812

889

DIN 371 HSS-E-PM rh

HSS-E rh

10-15

• • •

ISO 2 / 6H

8-12

6-12

Metric SPIRAL taps - HSS-E - HSS-E-PM

811

Availability • • •

•

TAPS 89

Metric SPIRAL taps - HSS-E - HSS-E-PM

METRIC SPIRAL TAPS THROUGH & BLIND HOLES

Through hole and blind hole Guhring no.

5734

5722

HSS-E

HSS-E-PM

HSS-E

left hand

DIN 371

Standard Tool material

786

Surface Cutting direction Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

M4 M5 M6 M8 M10

0.70 0.80 1.00 1.25 1.50

4.50 6.00 6.00 8.00 10.00

3.40 4.90 4.90 6.20 8.00

3.30 4.20 5.00 6.80 8.50

63.00 70.00 80.00 90.00 100.00

7.50 8.50 11.00 14.00 16.00

Availability • • • • •

• • • • • 50º Helix for maximum tool life

TAPS 90

• • • • •

5553

5551

5555

DIN 371 HSS-E rh

HSS-E-PM rh

HSS-E rh

10-15

• • • • •

ISO 2 / 6H

8-12

6-12

Metric SPIRAL taps - HSS-E - HSS-E-PM

5552

Availability • • • • •

• • • • •

TAPS 91

Metric SPIRAL taps - HSS-E - HSS-E-PM

METRIC SPIRAL TAPS THROUGH & BLIND HOLES

Through hole and blind hole Guhring no.

5717

5722

HSS-E

HSS-E-PM

HSS-E

left hand

Standard Tool material

787

DIN 376

Surface Cutting direction Tolerance

ISO 2 / 6H

Application Cutting speed m/min

10-15

M12 M14 M16 M18 M20 M22 M24 M30

1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.50

9.00 11.00 12.00 14.00 16.00 18.00 18.00 22.00

7.00 9.00 9.00 11.00 12.00 14.50 14.50 18.00

10.20 12.00 14.00 15.50 17.50 19.50 21.00 26.50

110.00 110.00 110.00 125.00 140.00 140.00 160.00 180.00

18.50 20.00 20.00 25.00 25.00 27.00 30.00 35.00

Availability • • • • • • • •

• • • •

50º Helix for maximum tool life

TAPS 92

• • • •

910

890

824

DIN 376 HSS-E rh

HSS-E-PM rh

HSS-E rh

10-15

• • • • •

•

ISO 2 / 6H

8-12

6-12

Metric SPIRAL taps - HSS-E - HSS-E-PM

823

Availability • • • • • • •

• • •

•

• •

•

TAPS 93

Metric fine GUN NOSE taps - HSS-E

metric fine GUN NOSE TAPS through holes

Through hole Guhring no. Standard Tool material

827 DIN 374 HSS-E

Surface Cutting direction Tolerance

rh ISO 2 / 6H

Application Cutting speed m/min

10-15

Code no.

TAPS 94

M3 M4 M5 M6 M6 M8 M8 M8 M10 M10 M10 M12 M12 M12 M14 M14 M14 M16 M16 M18 M18 M20 M20 M20 M22 M22 M24 M24 M24 M30 M32 M34

3.002 4.003 5.003 6.003 6.004 8.003 8.004 8.005 10.004 10.005 10.006 12.005 12.006 12.007 14.005 14.006 14.007 16.005 16.007 18.005 18.007 20.005 20.007 20.008 22.007 22.008 24.005 24.007 24.008 30.007 32.007 34.007

0.35 0.50 0.50 0.50 0.75 0.50 0.75 1.00 0.75 1.00 1.25 1.00 1.25 1.50 1.00 1.25 1.50 1.00 1.50 1.00 1.50 1.00 1.50 2.00 1.50 2.00 1.00 1.50 2.00 1.50 1.50 1.50

2.20 2.80 3.50 4.50 4.50 6.00 6.00 6.00 7.00 7.00 7.00 9.00 9.00 9.00 11.00 11.00 11.00 12.00 12.00 14.00 14.00 16.00 16.00 16.00 18.00 18.00 18.00 18.00 18.00 22.00 22.00 28.00

2.10 2.70 3.40 3.40 4.90 4.90 4.90 5.50 5.50 5.50 7.00 7.00 7.00 9.00 9.00 9.00 9.00 9.00 11.00 11.00 12.00 12.00 12.00 14.50 14.50 14.50 14.50 14.50 18.00 18.00 22.00

2.65 3.50 4.50 5.50 5.25 7.50 7.25 7.00 9.25 9.00 8.80 11.00 10.80 10.50 13.00 12.80 12.50 15.00 14.50 17.00 16.50 19.00 18.50 18.00 20.50 20.00 23.00 22.50 22.00 28.50 30.50 32.50

56.00 63.00 70.00 80.00 80.00 80.00 80.00 90.00 90.00 90.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 110.00 110.00 125.00 125.00 140.00 125.00 140.00 140.00 140.00 140.00 150.00 150.00 170.00

7.00 8.00 10.00 13.00 13.00 14.00 14.00 18.00 18.00 18.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 22.00 22.00 25.00 25.00 25.00 25.00 32.00 25.00 32.00 28.00 28.00 28.00 28.00 28.00 30.00

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Through hole and blind hole Guhring no. Standard Tool material

834 DIN 374 HSS-E

Surface Cutting direction Tolerance

RH ISO 2 / 6H

Application Cutting Speed m/min

10-15

Metric fine SPIRAL taps - HSS-E

metric fine SPIRAL TAPS Through & Blind holes

Code no.

mm 3.002 4.003 5.003 6.003 6.004 8.004 8.005 10.005 10.006 12.005 12.006 12.007 14.005 14.006 14.007 16.005 16.007 18.005 18.007 20.007 22.007 24.007 24.008 30.007

0.35 0.50 0.50 0.50 0.75 0.75 1.00 1.00 1.25 1.00 1.25 1.50 1.00 1.25 1.50 1.00 1.50 1.00 1.50 1.50 1.50 1.50 2.00 1.50

2.20 2.80 3.50 4.50 4.50 6.00 6.00 7.00 7.00 9.00 9.00 9.00 11.00 11.00 11.00 12.00 12.00 14.00 14.00 16.00 18.00 18.00 18.00 22.00

2.10 2.70 3.40 3.40 4.90 4.90 5.50 5.50 7.00 7.00 7.00 9.00 9.00 9.00 9.00 9.00 11.00 11.00 12.00 14.50 14.50 14.50 18.00

2.65 3.50 4.50 5.50 5.25 7.25 7.00 9.00 8.80 11.00 10.80 10.50 13.00 12.80 12.50 15.00 14.50 17.00 16.50 18.50 20.50 22.50 22.00 28.50

56.00 63.00 70.00 80.00 80.00 80.00 90.00 90.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 110.00 110.00 125.00 125.00 140.00 140.00 150.00

4.00 5.00 5.00 5.00 8.00 8.00 11.00 11.00 14.00 11.00 15.00 15.00 11.00 15.00 15.00 11.00 15.00 12.00 16.00 16.00 16.00 16.00 22.00 20.00

Availability • • • • • • • • • • • • • • • • • • • • • • • •

TAPS

M3 M4 M5 M6 M6 M8 M8 M10 M10 M12 M12 M12 M14 M14 M14 M16 M16 M18 M18 M20 M22 M24 M24 M30

P mm

Metric recoil taps - HSS-E

metric RECOIL TAPS Through & Blind holes

Through hole and blind hole

Through hole Guhring no.

1010

Standard

1011 DIN 40435

Tool material

HSS-E

Surface Cutting direction

Tolerance

10-15

Application Cutting Speed m/min

TAPS 96

M4 M5 M6 M8 M10 M12 M14 M16

0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00

6.00 6.00 8.00 10.00 9.00 11.00 12.00 14.00

4.90 4.90 6.20 8.00 7.00 9.00 9.00 11.00

4.20 5.25 6.30 8.40 10.50 12.50 14.50 16.50

70.00 80.00 90.00 100.00 100.00 110.00 110.00 125.00

12.00 14.00 17.00 20.00 20.00 30.00 26.00 33.00

M4 M5 M6 M8 M10 M12 M14 M16

0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00

6.00 6.00 8.00 10.00 9.00 11.00 12.00 14.00

4.90 4.90 6.20 8.00 7.00 9.00 9.00 11.00

4.20 5.25 6.30 8.40 10.50 12.50 14.50 16.50

70.00 80.00 90.00 100.00 100.00 110.00 110.00 125.00

7.50 8.50 11.00 14.00 16.00 18.50 20.00 20.00

Availability • • • • • • • •

• • • • • • • •

Guhring no.

Through hole

Blind hole

998

Standard

5718 Guhring std.

Tool material

HSS-E

Surface Cutting direction Tolerance

ISO 2 / 6H

6-10

Application Cutting speed m/min

Metric long series taps - HSS-E

metric long series gun nose & SPIRAL taps Through & Blind holes

M3 M4 M5 M6 M8 M10 M12 M14 M16 M20

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50

2.20 2.80 3.50 4.50 6.00 7.00 9.00 11.00 12.00 16.00

2.10 2.70 3.40 4.90 5.50 7.00 9.00 9.00 12.00

2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 17.50

70.00 90.00 100.00 110.00 125.00 140.00 180.00 200.00 200.00 250.00

18.00 22.00 24.00 25.00 28.00 30.00 35.00 35.00 40.00 45.00

M3 M4 M5 M6 M8 M10 M12 M16 M20

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50

3.50 4.50 6.00 6.00 6.00 7.00 9.00 12.00 16.00

2.70 3.40 4.90 4.90 4.90 5.50 7.00 9.00 12.00

2.50 3.30 4.20 5.00 6.80 8.50 10.20 14.00 17.50

112.00 112.00 125.00 125.00 140.00 160.00 180.00 220.00 280.00

6.00 7.50 8.50 11.00 14.00 16.00 18.50 20.00 25.00

Availability • • • • • • • • • •

• • • • • • • • •

TAPS

d1 mm

Metric high performance taps - HSS-E-PM

High performance taps Metric taps Synchro tapping all materials

Through hole and blind hole Guhring no. Standard Tool material

761

763

DIN 371

DIN 376

HSS-E-PM

Surface Cutting direction

Tolerance

6HX

Application 10-25

Cutting speed m/min

TAPS 98

M3 M4 M5 M6 M8 M10 M12 M14 M16 M20

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50

3.500 4.500 6.000 6.000 8.000 10.000 9.000 11.000 12.000 16.000

2.70 3.40 4.90 4.90 6.20 8.00 7.00 9.00 9.00 12.00

2.500 3.300 4.200 5.000 6.800 8.500 10.200 12.000 14.000 17.500

56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 140.00

2.50 3.50 4.00 5.00 6.30 7.50 8.80 10.00 10.00 12.50

Availability • • • • • • • • • •

Through hole Guhring no.

OVERSIZE TAP +0.4mm

Standard Tool material

5009 Guhring std. HSS-E

Surface Cutting direction Tolerance

rh ISO 2 / 6H

Application Cutting speed m/min

6-10

Metric OVERSIZE GUN NOSE taps - HSS-E

METRIC OVERSIZE GUN NOSE TAPS THROUGH HOLEs

M12 M14 M16 M20

1.75 2.00 2.00 2.50

9.00 11.00 12.00 16.00

7.00 9.00 9.00 12.00

10.20 12.00 14.00 17.50

180.00 200.00 200.00 250.00

35.00 35.00 40.00 45.00

Availability • • • •

TAPS 99

Metric taps - Carbide

Metric carbide taps hardened materials <62 HRc

Through hole and blind hole Guhring no.

2944

Standard

Guhring std.

Tool material

Solid carbide

Surface Cutting direction Tolerance Application Cutting speed m/min

rh ISO 2 / 6H Hardened Materials 2-4

TAPS 100

M3 M4 M5 M6 M8 M10 M12

0.50 0.70 0.80 1.00 1.25 1.50 1.75

3.500 4.500 6.000 6.000 8.000 10.000 12.000

2.70 3.40 4.90 4.90 6.20 8.00 9.00

2.600 3.400 4.300 5.100 6.900 8.600 10.400

56.00 63.00 70.00 80.00 90.00 100.00 110.00

12.00 14.00 17.00 20.00 20.00 24.00 28.00

Availability • • • • • • •

Metric thread milling cutters - Carbide

metric thread milling cutters - CARBIDE Guhring no.

4133

Standard

Guhring std.

Tool material

Solid carbide

Surface Cutting direction

Tolerance Application 50-100

Cutting speed m/min

d1 d3

Thread Code no. mm M6 M8 M10 M12 M14 M16 M20

6.000 8.000 10.000 12.000 14.000 16.000 20.000

Standard

60°

1.00 1.25 1.50 1.75 2.00 2.00 2.50

4.80 6.40 7.95 9.95 11.20 12.80 14.95

6.00 8.00 10.00 10.00 12.00 14.00 16.00

5.00 6.80 8.50 10.20 12.00 14.00 17.50

54.00 62.00 74.00 74.00 90.00 90.00 102.00

13.50 18.10 21.80 25.40 31.00 35.00 41.30

Type

Tool illustration

Availability

3 3 3 4 4 4 4

• • • • • • •

Tool material Surface Thread length

Sizes

Guhring no.

Thread milling cutters for UNC-threads Guhring std.

TM SP

2xD

10-24 - 1-8

4128

Solid Carbide

2xD

10-32 - 1-12

4129

1/16 - 1/2

4130

G 1/8 - G 3/8

3748

Thread milling cutters for UNF-threads Guhring std.

TM SP

TAPS

Solid Carbide

Thread milling cutters for NPT-threads Guhring std.

TM SP

Solid Carbide

Thread milling cutters for BSP-threads Guhring std.

TM SP

Solid Carbide

2xD

** Other thread milling cutters are available on request.

101

UNC GUN NOSE taps - HSS-E

UNC GUN NOSE TAPS THROUGH HOLEs

Through hole Guhring no. Standard

873

5725

878

1980

1985

DIN 371

DIN 376

DIN 371

DIN 376

Tool material

HSS-E

Surface Cutting direction

Tolerance

10-15

6-12

Application Cutting speed m/min

Code no.

inch

TAPS 102

No.2 No.3 No.4 No.5 No.6 No.8 No.10 No.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1" 1 1/8 1 1/4 1 1/2

2.184 2.515 2.845 3.175 3.505 4.166 4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400 28.575 31.750 38.100

TPI

56.00 48.00 40.00 40.00 32.00 32.00 24.00 24.00 20.00 18.00 16.00 14.00 13.00 12.00 11.00 10.00 9.00 8.00 7.00 7.00 6.00

2.80 2.80 3.50 3.50 4.00 4.50 6.00 6.00 7.00 8.00 10.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00 18.00 18.00 28.00

2.10 2.10 2.70 2.70 3.00 3.40 4.90 4.90 5.50 6.20 8.00 6.20 7.00 9.00 9.00 11.00 14.50 14.50 18.00 18.00 22.00

1.85 2.10 2.35 2.65 2.85 3.50 3.90 4.50 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 28.00 34.00

45.00 50.00 56.00 56.00 56.00 63.00 70.00 80.00 80.00 90.00 100.00 100.00 110.00 110.00 110.00 125.00 140.00 160.00 180.00 180.00 200.00

9.00 9.00 11.00 11.00 12.00 13.00 14.00 16.00 16.00 18.00 20.00 22.00 25.00 30.00 30.00 33.00 35.00 38.00 44.00 44.00 50.00

Availability • • • • • • • • • • • • • • • •

• • • • • • • •

• • • • •

• • • • • •

Through hole and blind hole Guhring no. Standard

876

5726

881

1981

1986

DIN 371

DIN 376

DIN 371

DIN 376

Tool material

HSS-E

Surface Cutting direction

Tolerance

10-15

6-12

Application Cutting speed m/min

UNC SPIRAL taps - HSS-E

UNC SPIRAL TAPS THROUGH & BLIND HOLES

Code no.

inch

No. 2-56 No. 3-48 No. 4-40 No. 5-40 No. 6-32 No. 8-32 No. 10-24 No. 12-24 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 7/8 x 9 1" x 8

2.184 2.515 2.845 3.175 3.505 4.166 4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400

2.80 2.80 3.50 3.50 4.00 4.50 6.00 6.00 7.00 8.00 10.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00

2.10 2.10 2.70 2.70 3.00 3.40 4.90 4.90 5.10 6.20 7.00 6.20 7.00 9.00 9.00 11.00 14.50 14.50

1.85 2.10 2.35 2.65 2.65 3.50 3.90 4.50 5.10 6.60 8.00 9.40 10.75 14.00 13.50 16.50 19.50 22.25

45.00 50.00 56.00 56.00 56.00 63.00 70.00 80.00 80.00 90.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 160.00

8.00 9.00 6.50 6.50 8.00 8.00 11.00 11.00 13.00 14.00 16.00 18.00 20.00 21.00 24.00 25.00 28.00 32.00

Availability •

• • • • • • • • • • • • • • •

• • • • • • • • • •

• •

• • •

TAPS

d1 X P

103

UNF GUN NOSE taps - HSS-E

unF gun nose taps through holes

Through hole Guhring no.

5727

Standard

908

2874

DIN 374

Tool material

HSS-E

Surface Cutting direction

Tolerance

Application Cutting speed m/min

10-15

6-12

TAPS 104

d1 X P

Code no.

inch

No. 4-48 No. 6-40 No. 8-36 No.10-32 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 7/8-14 1-12 1 1/8-12 1 1/4-12 1 1/2-12

2.845 3.505 4.166 4.826 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400 28.575 31.750 38.100

2.20 2.50 2.80 3.50 4.50 6.00 7.00 8.00 9.00 11.00 12.00 14.00 18.00 18.00 22.00 22.00 28.00

2.10 2.10 2.70 3.40 4.90 5.50 6.20 7.00 9.00 9.00 11.00 14.50 14.50 18.00 18.00 22.00

2.40 2.95 3.50 4.10 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.45 23.25 26.50 29.50 36.00

56.00 56.00 63.00 70.00 80.00 90.00 90.00 100.00 100.00 100.00 100.00 110.00 125.00 140.00 150.00 150.00 170.00

10.00 11.00 12.00 14.00 16.00 18.00 18.00 22.00 20.00 22.00 22.00 25.00 25.00 28.00 28.00 28.00 30.00

Availability • •

•

• •

• • • •

• •

• • • •

•

• • • • • • •

• •

Through hole and blind hole Guhring no.

5728

911

Standard

1991

DIN 374

Tool material

HSS-E

Surface Cutting direction

Tolerance

10-15

6-12

Application Cutting speed m/min

10-15

UNF SPIRAL taps - HSS-E

UNF SPIRAL taps Through & blind holes

Code no.

inch No.4 No.6 No.8 No.10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8

2.845 3.505 4.166 4.826 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225

TPI

48.00 40.00 36.00 32.00 28.00 24.00 24.00 20.00 20.00 18.00 18.00 16.00 14.00

2.20 2.50 2.80 3.50 4.50 6.00 7.00 8.00 9.00 11.00 12.00 14.00 18.00

2.10 2.10 2.70 3.40 4.90 5.50 6.20 7.00 9.00 9.00 11.00 14.50

2.40 2.95 3.50 4.10 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.40

56.00 56.00 63.00 70.00 80.00 90.00 90.00 90.00 100.00 100.00 100.00 110.00 125.00

6.00 11.00 10.00 12.00 14.00 18.00 18.00 18.00 20.00 22.00 22.00 25.00 25.00

Availability • • • • • • • • • •

• • • • • • •

• •

TAPS 105

Through hole and blind hole Guhring no. Standard

2892

2893

DIN 371

DIN 376

Tool material

2847

2848

DIN 371

DIN 376

HSS-E

Surface Cutting direction

Tolerance Application 10-15

Cutting speed m/min

SW d2

BSW GUN NOSE & SPIRAL taps - HSS-E

BSW GUN NOSE & SPIRAL TAPS THROUGH & BLIND HOLES

Code no.

inch W 1/8 W 5/32 W 3/16 W 1/4 W 5/16 W 3/8 W 3/8 W 7/16 W 1/2 W 9/16 W 5/8 W 3/4 W 7/8 W1

TAPS 106

3.175 3.969 4.762 6.350 7.938 9.525 9.525 11.113 12.700 14.287 15.876 19.051 22.226 25.401

TPI

40.00 32.00 24.00 20.00 18.00 16.00 16.00 14.00 12.00 12.00 11.00 10.00 9.00 8.00

3.500 4.50 6.000 7.000 8.000 7.000 10.000 8.000 9.000 11.000 12.000 14.000 18.000 18.000

2.70 3.40 4.90 5.50 6.20 5.50 8.00 6.20 7.00 9.00 9.00 11.00 14.50 14.50

2.500 3.200 3.600 5.100 6.500 7.900 7.900 9.200 10.50 12.00 13.50 16.50 19.25 22.00

56.00 63.00 70.00 80.00 90.00 100.00 100.00 100.00 110.00 110.00 110.00 125.00 140.00 160.00

l2 6.50 13.00 11.00 13.00 14.00 16.00 16.00 22.00 25.00 30.00 30.00 33.00 35.00 38.00

Availability • • • • •

• • • • • •

• • • • • • • •

• • • • • •

Through hole and blind hole Guhring no.

962

965

Standard

5732

5731

DIN 5156

Tool material

HSS-E

Surface Cutting direction

10-15

8-10

Tolerance Application Cutting speed m/min

BSP GUN NOSE & spiral taps - HSS-E

BSP GUN NOSE & spiral taps through & blind HoleS

Code no.

inch G 1/16 G 1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1”

7.723 9.728 13.157 16.662 20.955 26.441 33.249

TPI

28.00 28.00 19.00 19.00 14.00 14.00 11.00

6.00 7.00 11.00 12.00 16.00 20.00 25.00

4.90 5.50 9.00 9.00 12.00 16.00 20.00

6.80 8.80 11.80 15.25 19.00 24.50 30.75

90.00 90.00 100.00 100.00 125.00 140.00 160.00

18.00 18.00 20.00 22.00 25.00 28.00 30.00

Availability •

• • • • • • •

• • • • • •

TAPS 107

Through hole and blind hole Guhring no.

967

Standard

968 DIN 5156

Tool material

HSS-E

Surface Cutting direction

8-10

Tolerance Application Cutting speed m/min

SW d1

BSP GUN NOSE & spiral taps - HSS-E

BSP GUN NOSE & spiral taps through & blind HoleS

Code no.

inch G 1/16 G 1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1”

TAPS 108

7.723 9.728 13.157 16.662 20.955 26.441 33.249

TPI

28.00 28.00 19.00 19.00 14.00 14.00 11.00

6.00 7.00 11.00 12.00 16.00 20.00 25.00

4.90 5.50 9.00 9.00 12.00 16.00 20.00

6.80 8.80 11.80 15.25 19.00 24.50 30.75

90.00 90.00 100.00 100.00 125.00 140.00 160.00

18.00 18.00 20.00 22.00 25.00 28.00 30.00

Availability • • • • • • •

• • • • • • •

Through hole and blind hole Guhring no. Standard Tool material

5007 Guhring std. HSS-E

Surface Cutting direction

BSPT TAPS - HSS-E

BSPT TAPS THROUGH & BLIND HOLES

Tolerance Application Cutting speed m/min

5-10

Code no.

inch 1/8 1/4 3/8 1/2 3/4 1

9.728 13.157 16.662 20.955 26.441 33.249

TPI

28 19 19 14 14 11

7.00 11.00 12.00 16.00 20.00 25.00

5.50 9.00 9.00 12.00 16.00 20.00

8.40 11.20 14.75 18.25 23.75 30.00

63.00 63.00 70.00 80.00 100.00 110.00

15.00 21.00 21.00 27.00 27.00 32.00

Availability • • • • • •

TAPS 109

NPT GUN NOSE & SPIRAL TAPS - HSS-E

NPT GUN NOSE & SPIRAL TAPS THROUGH & BLIND HOLES

Through hole and blind hole Guhring no.

973

Standard

1087 Guhring std.

Tool material

HSS-E

Surface Cutting direction

5-10

3-8

Tolerance Application Cutting speed m/min

Code no.

inch

TAPS 110

TPI

1/16 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2

8.190 10.620 14.140 17.570 21.900 27.230 34.180 42.900 48.940 61.000

27.00 27.00 18.00 18.00 14.00 14.00 11.50 11.50 11.50 11.50

6.00 7.00 11.00 12.00 16.00 20.00 25.00 32.00 36.00 36.00

4.90 5.50 9.00 9.00 12.00 16.00 20.00 24.00 29.00 29.00

6.15 8.40 11.10 14.30 17.90 23.30 29.00 37.70 43.70 55.60

56.00 63.00 63.00 70.00 80.00 100.00 110.00 125.00 140.00 160.00

14.00 15.00 21.00 21.00 27.00 27.00 32.00 33.00 33.00 33.00

1/8 1/4 3/8 1/2 3/4

10.620 14.140 17.570 21.900 27.230

27.00 18.00 18.00 14.00 14.00

11.00 14.00 16.00 18.00 22.00

9.00 11.00 12.00 14.50 18.00

8.50 11.20 14.40 18.00 23.40

90.00 100.00 110.00 125.00 140.00

15.00 21.00 21.00 27.00 27.00

Availability • • • • • • • • • •

• • • • • •

Guhring no.

Through hole and blind hole 782

793

Standard

921

5598

DIN 371

Tool material

5599 DIN 376

HSS-E

Surface Cutting direction

Tolerance

10-15

6HX

Application Cutting speed m/min

12-18

10-15

P d1

12-18

Metric fluteless taps - HSS-E

metric fluteless TAPS (thread formers) through & blind holes

l2 l1

P d1

l2 l1

M2 M 2.5 M3 M 3.5 M4 M5 M6 M8 M10 M12 M14 M16

0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00

2.80 2.80 3.50 4.00 4.50 6.00 6.00 8.00 10.00 9.00 11.00 12.00

2.10 2.10 2.70 3.00 3.40 4.90 4.90 6.20 8.00 7.00 9.00 9.00

1.80 2.30 2.80 3.25 3.70 4.65 5.50 7.40 9.25 11.25 13.10 15.10

45.00 50.00 56.00 56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00

8.00 9.00 10.00 12.00 12.00 14.00 16.00 18.00 20.00 24.00 26.00 26.00

Availability • •

• • • • • • • • •

TAPS 111

Guhring no. Standard

Through hole Blind hole 1587

1589

DIN 371

Tool material

DIN 376 HSS-E

Surface Cutting direction

Tolerance

rh 6HX

Application Cutting speed m/min

6-12

P d1

l2 l1 P d1

Metric fluteless taps (THREAD FORMERS) - HSS-E

metric fluteless TAPS (thread formers) through & blind holes

l2 l1

TAPS 112

M3 M4 M5 M6 M8 M10 M12 M16

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00

3.50 4.50 6.00 6.00 8.00 10.00 9.00 12.00

2.70 3.40 4.90 4.90 6.20 8.00 7.00 9.00

2.80 3.70 4.65 5.50 7.40 9.25 11.25 15.10

56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00

10.00 12.00 14.00 16.00 18.00 20.00 24.00 26.00

Availability • • • • • • • •

Through hole Blind hole

Guhring no. Standard

1584

1585

DIN 2184-1

Tool material

DIN 2184-1 HSS-E

Surface Cutting direction

Tolerance

rh 2BX

Application Cutting speed m/min

P d1

l2 l1 P d1

UNF fluteless taps (THREAD FORMERS) - HSS-E

UNF fluteless TAPS (thread formers) through & blind holes

l2 l1

Code No

inch NR.10 NR.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050

TPI

32.00 28.00 28.00 24.00 24.00 20.00 20.00 18.00 18.00 16.00

6.000 6.000 7.000 8.000 10.000 8.000 9.000 11.000 12.000 14.000

4.90 4.90 5.50 6.20 8.00 6.20 7.00 9.00 9.00 11.00

4.450 5.100 5.950 7.450 9.050 10.500 12.100 13.650 15.250 18.300

70.00 80.00 80.00 90.00 100.00 100.00 100.00 100.00 100.00 110.00

14.00 16.00 16.00 18.00 18.00 22.00 20.00 22.00 22.00 25.00

Availability • • • • • • • • • •

TAPS 113

Through hole and blind hole

Guhring no. Standard

1582

1583

DIN 371

Tool material

DIN 376 HSS-E

Surface Cutting direction

Tolerance

rh 2BX

Application Cutting speed m/min

10-15

P d1

l2 l1 P d1

UNC fluteless taps (THREAD FORMERS) - HSS-E

UNC fluteless TAPS (thread formers) through & blind holes

l2 l1

Code no.

inch No.10 No.12 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

TAPS 114

4.826 5.486 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050

TPI

24.00 24.00 20.00 18.00 16.00 14.00 13.00 12.00 11.00 10.00

6.00 6.00 7.00 8.00 10.00 8.00 9.00 11.00 12.00 14.00

4.90 4.90 5.50 6.20 8.00 6.20 7.00 9.00 9.00 11.00

4.35 5.00 5.75 7.30 8.80 10.30 11.80 13.30 14.80 17.90

70.00 80.00 80.00 90.00 100.00 100.00 110.00 110.00 110.00 125.00

14.00 16.00 16.00 18.00 20.00 22.00 25.00 30.00 30.00 33.00

Availability • • • • • • • • • •

Through hole and blind hole Guhring no.

Series Taps 1st, 2nd tap is undersize.

861

Standard

862

863

864

2nd

Bottoming

DIN 352

Tool material

HSS

Surface Cutting direction

Tolerance Application

rh ISO 2 / 6H

3pce Hand Tap Set

1st

METRIC hand taps - HSS

metric HAND TAPS Through & Blind holes

M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M24

0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 3.00

3.50 4.50 6.00 6.00 6.00 7.00 9.00 11.00 12.00 14.00 16.00 18.00

2.70 3.40 4.90 4.90 4.90 5.50 7.00 9.00 9.00 11.00 12.00 14.50

2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50 21.00

40.00 45.00 50.00 56.00 63.00 70.00 75.00 80.00 80.00 95.00 95.00 110.00

10.00 12.00 14.00 16.00 18.00 20.00 24.00 26.00 26.00 30.00 32.00 36.00

Availability • • • • • • • • • • • •

• • • • • • • • • • • •

TAPS 115

UNC hand taps - HSS

Unc HAND TAPS Through & BLind Holes

Through hole and blind hole Guhring no.

Series Taps 1st, 2nd tap is undersize.

981

984

Standard

DIN 352

Tool material

HSS

Surface Cutting direction

Tolerance

3pce Hand Tap Set

Bottoming

Application

Code no.

inch No.4 No.5 No.6 No.8 No.10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 2

TAPS 116

2.845 3.175 3.505 4.166 4.826 6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050 22.225 25.400 28.575 50.800

TPI

40.00 40.00 32.00 32.50 24.00 20.00 18.00 16.00 14.00 13.00 12.00 11.00 10.00 9.00 8.00 7.00 4.50

3.50 4.00 4.00 4.50 6.00 6.00 6.00 7.00 8.00 9.00 11.00 12.00 16.00 18.00 18.00 22.00 40.00

2.70 3.00 3.00 3.40 4.90 4.90 4.90 5.50 6.20 7.00 9.00 9.00 12.00 14.50 14.50 18.00 32.00

2.35 2.65 2.85 3.50 3.90 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 45.00

40.00 40.00 45.00 45.00 50.00 56.00 63.00 70.00 70.00 75.00 80.00 80.00 95.00 100.00 110.00 125.00 180.00

11.00 11.00 12.00 13.00 14.00 16.00 18.00 20.00 22.00 25.00 30.00 30.00 33.00 25.00 38.00 44.00 65.00

Availability

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

Through hole and blind hole Guhring no.

Series Taps 1st tap is undersize.

985

Standard

987 DIN 2181

Tool material

HSS

Surface Cutting direction

Tolerance

2pce Hand Tap Set

Bottoming

Application

UNF hand taps - HSS

unf HAND TAPS through & blind holes

Code no.

inch No.10 1/4 5/16 3/8 7/16 1/2 5/8

4.826 6.350 7.938 9.525 11.113 12.700 15.875

TPI

32.00 28.00 24.00 24.00 20.00 20.00 18.00

6.00 6.00 6.00 7.00 8.00 9.00 12.00

4.90 4.90 4.90 5.50 6.20 7.00 9.00

4.10 5.50 6.90 8.50 9.90 11.50 14.50

50.00 56.00 63.00 63.00 70.00 70.00 70.00

14.00 17.00 17.00 18.00 20.00 20.00 20.00

Availability • • • • • • •

• • • • • • •

TAPS 117

BSW hand taps - HSS

BSW hand taps through & blind holes

Through hole and blind hole Guhring no.

Series Taps 1st, 2nd tap is undersize.

954

957

Standard

DIN 352

Tool material

HSS

Surface Cutting direction

3pce Hand Tap Set

Bottoming

Tolerance Application

TAPS 118

Code no.

inch

TPI

W 3/16 W 1/4 W 5/16 W 3/8 W 1/2

4.762 6.350 7.938 9.525 12.700

24.00 20.00 18.00 16.00 12.00

6.00 6.00 6.00 7.00 9.00

4.90 4.90 4.90 5.50 7.00

3.60 5.10 6.50 7.90 10.50

50.00 56.00 63.00 70.00 75.00

14.00 16.00 18.00 20.00 25.00

Availability • • • •

• • • • •

Guhring no. Standard Tool material

151 DIN EN 22568 HSS

Surface Cutting direction

Tolerance

Application 6-10

Cutting speed m/min

Metric button dies - HSS

metric button dies

workpiece Ø

M2 M3 M4 M5 M6 M8 M10 M12 M16 M18 M20 M24

0.40 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50 2.50 3.00

16.00 20.00 20.00 20.00 20.00 25.00 30.00 38.00 45.00 45.00 45.00 55.00

5.00 5.00 5.00 7.00 7.00 9.00 11.00 14.00 18.00 18.00 18.00 22.00

1.940 2.920 3.910 4.900 5.880 7.870 9.850 11.830 15.820 17.790 19.790 23.770

Availability • • • • • • • • • • • •

TAPS 119

UNC button dies - HSS

UNC button dies Guhring no. Standard Tool material

182 DIN EN 22568 HSS

Surface Cutting direction

Tolerance Application 6-10

Cutting speed m/min

TAPS 120

Code no.

workpiece Ø

inch

TPI

1/4 5/16 3/8 7/16 1/2 5/8 3/4

6.350 7.938 9.525 11.113 12.700 15.875 19.050

20.00 18.00 16.00 14.00 13.00 11.00 10.00

20.00 25.00 30.00 30.00 38.00 45.00 45.00

7.00 9.00 11.00 11.00 14.00 18.00 18.00

6.220 7.800 9.370 10.950 12.520 15.680 18.840

Availability • • • • • • •

Guhring no. Standard Tool material

185 DIN EN 22568 HSS

Surface Cutting direction

Tolerance

UNF button dies - HSS

UNF button dies

Application 6-10

Cutting speed m/min

Code no.

workpiece Ø

inch

TPI

1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4

6.350 7.938 9.525 11.113 12.700 14.288 15.875 19.050

28.00 24.00 24.00 20.00 20.00 18.00 18.00 16.00

20.00 25.00 30.00 30.00 38.00 38.00 45.00 45.00

7.00 9.00 11.00 11.00 10.00 10.00 14.00 14.00

6.240 7.820 9.410 10.980 12.560 14.140 15.730 18.890

Availability • • • • • • • •

TAPS 121

BSW button dies - HSS

BSW button dies Guhring no. Standard Tool material

172 DIN EN 22568 HSS

Surface Cutting direction

Tolerance Application 6-10

Cutting speed m/min

TAPS 122

Code no.

workpiece Ø

inch

TPI

W 1/4 W 3/8 W 1/2

6.350 9.525 12.700

20.00 16.00 12.00

20.00 30.00 38.00

7.00 11.00 14.00

6.180 9.350 12.470

Availability • • •

MILLING CUTTERS

Guhring no. Standard Tool material

2 FLUTE METRIC EX LONG CENTRE CUTTING - HSCO Guhring no.

3451

Standard

DIN 327 D

Tool material

M42

Surface

DIN 844 L M42

Surface N

Type

Helix

30°

Helix

30°

Tolerance

h10

e8/h10

MILLING CUTTERS 124

3453

Type Tolerance

Metric slot drills - HSCO

2 FLUTE METRIC CENTRE CUTTING - HSCO

1.000 1.500 2.000 2.500 3.000 3.500 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 14.000 15.000 16.000 18.000 20.000 25.000

6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 20.000 25.000

47.00 47.00 48.00 49.00 49.00 50.00 51.00 52.00 52.00 60.00 61.00 61.00 63.00 70.00 73.00 73.00 73.00 79.00 79.00 88.00 102.00

2.00 3.00 4.00 5.00 5.00 6.00 7.00 8.00 8.00 10.00 11.00 11.00 13.00 13.00 16.00 16.00 16.00 19.00 19.00 22.00 26.00

z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Availability • • • • • • • • • • • • • • • • • • • • •

3.00 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00

6.000 6.000 6.000 6.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000

56.00 63.00 68.00 68.00 88.00 95.00 110.00 110.00 123.00 123.00 141.00

12.00 19.00 24.00 24.00 38.00 45.00 53.00 53.00 63.00 63.00 75.00

z 2 2 2 2 2 2 2 2 2 2 2

Availability • • • • • • • • • • •

3 FLUTE METRIC EX LONG CENTRE CUTTING - HSCO

Guhring no. Standard Tool material

Guhring no.

3459

Standard

DIN 844 K

Tool material

M42

Surface N

Type

Helix

30º

Helix

30º

Tolerance

h10

e8/h10

3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 6.000 6.000 6.000 10.000 10.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000

52.00 55.00 57.00 57.00 66.00 69.00 69.00 72.00 83.00 83.00 92.00 92.00 104.00

8.00 11.00 13.00 13.00 16.00 19.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00

M42

Surface

DIN 844 L

Type Tolerance

3460

z 3 3 3 3 3 3 3 3 3 3 3 3 3

Availability • • • • • • • • • • • • •

3 Flute Metric END MILLS - HSCO

3 FLUTE METRIC CENTRE CUTTING - HSCO

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 6.000 6.000 6.000 10.000 10.000 12.000 12.000 16.000 16.000 20.000

56.00 63.00 68.00 68.00 88.00 95.00 110.00 110.00 123.00 123.00 141.00

12.00 19.00 24.00 24.00 38.00 45.00 53.00 53.00 63.00 63.00 75.00

z 3 3 3 3 3 3 3 3 3 3 3

Availability • • • • • • • • • • •

MILLING CUTTERS 125

Guhring no. Standard Tool material

4 FLUTE METRIC EX long CENTRE CUTTING - HSCO Guhring no.

3428

Standard

DIN 844 K

Tool material

M42

Surface

DIN 844 L M42

Surface Type

Helix

30º

Helix

30º

Tolerance

k10

Tolerance

k10

MILLING CUTTERS 126

3431

Type

4 Flute Metric END MILLS - HSCO

4 FLUTE METRIC CENTRE CUTTING - HSCO

2.000 2.500 3.000 4.000 5.000 6.000 7.000 8.000 10.000 11.000 12.000 13.000 14.000 16.000 18.000 20.000 25.000 30.000 32.000

6.000 6.000 6.000 6.000 6.000 6.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 20.000 25.000 25.000 32.000

51.00 52.00 52.00 55.00 57.00 57.00 66.00 69.00 72.00 79.00 83.00 83.00 83.00 92.00 92.00 104.00 121.00 121.00 133.00

7.00 8.00 8.00 11.00 13.00 13.00 16.00 19.00 22.00 22.00 26.00 26.00 26.00 32.00 32.00 38.00 45.00 45.00 53.00

z 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6

Availability • • • • • • • • • • • • • • • • • • •

3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 14.000 15.000 16.000 18.000 20.000 25.000 28.000 30.000 32.000 40.000

6.000 6.000 6.000 6.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 20.000 25.000 25.000 25.000 32.000 40.000

56.00 63.00 68.00 68.00 80.00 88.00 88.00 95.00 102.00 110.00 110.00 110.00 123.00 123.00 141.00 166.00 166.00 166.00 186.00 217.00

12.00 19.00 24.00 24.00 30.00 38.00 38.00 45.00 45.00 53.00 53.00 53.00 63.00 63.00 75.00 90.00 90.00 90.00 106.00 125.00

z 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6

Availability • • • • • • • • • • • • • • •

T-SLOT CUTTERS - HSCO Guhring no. Standard Tool material

Guhring no.

3570

Standard

DIN 851

Tool material

HSCO

Surface Type

Type

Helix

Tolerance

12.500 16.000 18.000 19.000 21.000 22.000 25.000 28.000 32.000

10.000 10.000 12.000 12.000 12.000 12.000 16.000 16.000 16.000

57.00 62.00 70.00 71.00 74.00 75.00 82.00 85.00 90.00

6.00 8.00 8.00 9.00 9.00 10.00 11.00 12.00 14.00

z Code no. 6 12.500 6 16.000 6 18.000 6 19.000 8 21.000 8 22.000 8 25.000 8 28.000 8 32.000

Availability • • • • • • • • •

5º

d3 d1

d11

HSCO

10.000 11.000 12.000 14.000 16.000 20.000 24.000 28.000 34.000 41.000 48.000 56.000

10.000 10.000 12.000 12.000 12.000 16.000 16.000 25.000 25.000 25.000 25.000 32.000

6.000 6.000 6.000 6.000 6.000 8.000 8.000 6.000 6.000 6.000 6.000 8.000

60.00 60.00 60.00 60.00 60.00 67.00 71.00 85.00 90.00 100.00 100.00 112.00

z Code no. rad (mm) 4 4 4 4 4 4 4 4 4 6 6 6

2.000 2.500 3.000 4.000 5.000 6.000 8.000 10.000 12.000 12.500 16.000 20.000

Availability

Corner rounding cutters - HSCO

DIN 6518

Surface

3176

T-slot cutters - HSCO

CORNER ROUNDING CUTTERS With face relief - HSCO

• • • • • • • • • • •

MILLING CUTTERS 127

Guhring no. Standard Tool material Type

Guhring no.

3572

Standard

DIN 1833

Tool material

HSCO

3574 DIN 1833 HSCO

Surface Type

Profile angle

60º

Tolerance

js16

Tolerance

js16

45º

Profile angle

MILLING CUTTERS 128

METRIC DOVETAIL CUTTERS - HSCO 60° DOVETAIL

Surface

Metric dovetail cutters - HSCO

METRIC DOVETAIL CUTTERS - HSCO 45° DOVETAIL

16.000 20.000 25.000 32.000

12.00 12.00 12.00 16.00

60.00 63.00 67.00 71.00

4.00 5.00 6.30 8.00

z Code no. 8 10 10 12

16.000 20.000 25.000 32.000

Availability • • • •

16.000 20.000 25.000 32.000

12.00 12.00 12.00 16.00

60.00 63.00 67.00 71.00

6.30 8.00 10.00 12.50

z Code no. 8 10 10 12

16.000 20.000 25.000 32.000

Availability • • • •

Guhring no. Standard Tool material

2 FLUTE METRIC EX LONG - CARBIDE Guhring no.

3676 Solid Carbide

Guhring std.

Tool material

Solid Carbide

Surface

Surface Type

30º

Helix

30º

Tolerance

h10

Tolerance

h10

Helix angle

Type

5549

Standard

DIN 6528

Metric slot drills - Carbide

2 FLUTE METRIC STANDARD LENGTH - CARBIDE

2.000 3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

6.000 6.000 6.000 6.000 6.000 8.000 10.000 12.000 16.000 20.000

57.00 57.00 57.00 57.00 57.00 63.00 72.00 83.00 92.00 104.00

5.00 7.00 8.00 10.00 10.00 16.00 19.00 22.00 26.00 32.00

z 2 2 2 2 2 2 2 2 2 2

Availability • • • • • • • • • •

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00 65.00 65.00

z 2 2 2 2 2 2 2 2 2

Availability • • • • • • • • •

MILLING CUTTERS 129

Guhring no. Standard Tool material

Guhring no.

5743

Standard

Guhring std. Solid Carbide

Surface W

Type

Helix angle

45º

Helix

45º

Tolerance

h10

Type

MILLING CUTTERS 130

3358

Tool material

DIN 6527 L Solid Carbide

Surface

Metric slot drills - Carbide

FOR ALUMINUM 2 Flute METRIC EX LONG - CARBIDE

FOR ALUMINUM 2 Flute METRIC STANDARD LENGTH - CARBIDE

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 20.000

6.000 6.000 6.000 6.000 8.000 10.000 12.000 14.000 16.000 20.000

57.00 57.00 57.00 57.00 63.00 72.00 83.00 84.00 92.00 104.00

7.00 8.00 10.00 10.00 16.00 19.00 22.00 22.00 26.00 32.00

z 2 2 2 2 2 2 2 2 2 2

Availability • • • • • • • • • •

5.00 6.00 8.00 10.00 12.00 16.00

5.000 6.000 8.000 10.000 12.000 16.000

75.00 75.00 100.00 100.00 150.00 150.00

30.00 30.00 40.00 40.00 45.00 65.00

z 2 2 2 2 2 2

Availability • • • • • •

Guhring no. Standard Tool material

Guhring no.

3472

Standard

Guhring std.

Tool material

Solid Carbide

DIN 6527 L Solid Carbide

Surface Type Helix angle Tolerance

3473

Surface Type

Helix angle

39º / 40º / 41º

Tolerance

h10

W 39º / 40º / 41º h10

3 Flute Metric END MILLs - Carbide

FOR ALUMINUM 3 Flute METRIC EX LONG - CARBIDE

FOR ALUMINUM 3 Flute METRIC STANDARD LENGTH - CARBIDE

d3 l2

l2 l3

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

57.00 57.00 57.00 57.00 63.00 72.00 83.00 92.00 104.00

8.00 11.00 13.00 13.00 19.00 22.00 26.00 32.00 38.00

15.00 18.00 18.00 21.00 27.00 32.00 38.00 44.00 54.00

Availability • • • • • • • • •

6.000 8.000 10.000 12.000 16.000 20.000

65.00 80.00 80.00 93.00 108.00 126.00

13.00 19.00 22.00 26.00 32.00 38.00

29.00 39.00 40.00 48.00 60.00 76.00

Availability • • • • • •

MILLING CUTTERS 131

3 FLUTE METRIC EX LONG - CARBIDE

Guhring no.

5573 5574 5506

Standard

DIN 6527 L

Tool material

Guhring std.

Guhring no.

Solid Carbide

Standard

Guhring std. Solid Carbide

Surface N

Type

Helix angle

30º

45º

Helix

30º

Tolerance

h10

Tolerance

h10

Type

3680

Tool material

Surface

3 Flute Metric END MILLS - Carbide

3 FLUTE METRIC STANDARD LENGTH - CARBIDE

MILLING CUTTERS 132

0.500 0.600 0.800 1.000 1.200 1.500 1.800 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 5.750 6.000 7.000 8.000 8.700 9.000 10.000 12.000 14.000 16.000 18.000 20.000

3.000 3.000 3.000 3.000 3.000 3.000 3.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 6.000 8.000 8.000 10.000 10.000 10.000 12.000 14.000 16.000 18.000 20.000

38.00 38.00 38.00 38.00 38.00 38.00 38.00 45.00 45.00 57.00 57.00 57.00 45.00 57.00 45.00 45.00 57.00 63.00 63.00 55.00 55.00 72.00 83.00 83.00 92.00 92.00 104.00

1.50 1.50 2.00 2.00 2.00 2.00 2.00 4.00 5.00 7.00 7.00 8.00 8.00 10.00 8.00 10.00 10.00 13.00 16.00 14.00 14.00 19.00 22.00 22.00 26.00 28.00 32.00

z 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

Availability • • • • • • • • • • • • • •

• • • •

• • • m

• • • • • • •

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00 65.00 65.00

z 3 3 3 3 3 3 3 3 3

Availability • • • • • • • • •

RF 100 u high performance END MILLS 3 flute METRIC standard length - carbide Guhring no. Standard

RF 100 U high-perfomance end mills excel thanks to unequal helix angles which considerably reduce vibration. The uneven helix angle vastly improves surface quality for finishing operations and a considerably higher feed rate for slot drilling and roughing operations are also achieved.

Tool material

3892 DIN 6527 L Solid Carbide

Surface Type

Helix

41º / 43º / 45º

Tolerance

With many applications. the complete milling process can be covered with one RF 100 U. which as well as increasing tool life and dimensional accuracy of the workpiece generates a considerable cost advantage.

h10

Summary of advantages suitable for roughing and finishing up to 60% higher feed rates up to 4-times longer tool life vibration-free operation improved workpIece surface quality d1

• • • • •

HIGH-PERFoRMANCE 3 Flute end mills - Carbide

RF 100 U high-performance end mills for materials up to 1400 N/mm2 (44 HRC)

with neck clearance

6.000 8.000 10.000 12.000 16.000 20.000

5.500 7.500 9.200 11.200 15.000 19.000

57.00 63.00 72.00 83.00 92.00 104.00

13.00 19.00 22.00 26.00 32.00 38.00

z 3 3 3 3 3 3

Availability • • • • • •

41º 43º 45º

MILLING CUTTERS

micro corner protection for longer tool life

133

Guhring no.

3173

3114

Standard

Guhring std.

Standard

Guhring std.

Solid carbide

Tool material

Solid carbide

Surface

Type

Helix

45º

Helix

35º / 38º

Tolerance

h10

Tolerance

h10

RATIO

MILLING CUTTERS 134

4 FLUTE IMPERIAL STANDARD LENGTH - CARBIDE

Tool material

3 Flute Imperial end mills - Carbide

3 FLUTE IMPERIAL STANDARD LENGTH - CARBIDE

inch

1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1

1 1/2 2 2 1/2 2 1/2 2 1/2 2 3/4 3 3 1/2 4 4

3/8 5/8 3/4 13/16 1 1 1 1 1/4 1 1/2 1 1/2

z Code no. mm 3 3 3 3 3 3 3 3 3 3

3.170 4.760 6.350 7.940 9.520 11.110 12.700 15.870 19.050 25.400

Availability • • • • • • • • • •

inch

3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1

2 2 1/2 2 1/2 2 1/2 2 3/4 3 3 1/2 4 4

5/8 3/4 13/16 1 1 1 1 1/4 1 1/2 1 1/2

z Code no. mm 4 4 4 4 4 4 4 4 4

4.760 6.350 7.940 9.520 11.110 12.700 15.870 19.050 25.400

Availability • • • • • • • • •

Guhring no. Standard Tool material

3562 DIN 6527 L Solid carbide

Surface Type

Helix

30º

Tolerance

h10

4 Flute Metric roughing end mills - Carbide

4 FLUTE METRIC ROUGHING END MILLS STANDARD LENGTH WITH CRN RADIUS - CARBIDE

l2 l3

6.000 8.000 8.000 10.000 10.000 10.000 12.000 12.000 12.000 16.000 16.000 16.000

5.700 7.700 7.700 9.500 9.500 9.500 11.500 11.500 11.500 15.500 15.500 15.500

57.00 63.00 63.00 72.00 72.00 72.00 83.00 83.00 83.00 92.00 92.00 92.00

13.00 19.00 19.00 22.00 22.00 22.00 26.00 26.00 26.00 32.00 32.00 32.00

21.00 27.00 27.00 32.00 32.00 32.00 38.00 38.00 38.00 44.00 44.00 44.00

1.00 0.50 1.00 1.00 2.00 3.00 1.00 2.00 3.00 1.00 1.50 2.00

z Code no. 4 6.010 4 8.005 4 8.010 4 10.010 4 10.020 4 10.030 4 12.010 4 12.020 4 12.030 4 16.010 4 16.015 4 16.020

Availability • • • • • • • • • • • •

MILLING CUTTERS

Other corner radii available on request

135

Guhring no. Standard Tool material

5535

3649

4 FLUTE METRIC EX LONG - carbide Guhring no.

5735

Solid Carbide

5582

Standard

Guhring std. Solid Carbide

Surface

Type

Helix

30º

35º/38º

Helix

30º

35º / 38º

Tolerance

h10

Tolerance

h10

h10 RATIO

RATIO

MILLING CUTTERS 136

5556

Tool material

DIN 6527 L

Surface

4 Flute Metric end mills - Carbide

4 FLUTE METRIC STANDARD LENGTH - carbide

2.000 3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 12.000 14.000 16.000 18.000 20.000 25.000

6.000 6.000 6.000 6.000 6.000 8.000 8.000 10.000 10.000 12.000 14.000 16.000 18.000 20.000 25.000

57.00 57.00 57.00 57.00 57.00 63.00 63.00 72.00 72.00 83.00 83.00 92.00 92.00 104.00 121.00

7.00 8.00 11.00 13.00 13.00 16.00 19.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00 45.00

z 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Availability • • • • • • • • • • • • • • •

• • • • • • • • • • •

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00 150.00 150.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00 45.00 65.00 65.00 65.00

4 4 4 4 4 4 4 4 4 4 4

6.000 8.000 10.000 12.000 16.000 20.000 25.000

75.00 108.00 100.00 150.00 150.00 150.00 150.00

30.00 40.00 40.00 45.00 65.00 65.00 75.00

4 4 4 4 4 4 4

Availability • • • • • • • • • • • • • • • • • •

Guhring no. Standard

RF 100 high-perfomance end mills excel thanks to unequal helix angles which considerably reduces vibration. The uneven helix angle vastly improves surface quality for finishing operations and a considerably higher feed rate for slot drilling and roughing operations are also achieved.

Tool material

3803 DIN 6527 L Solid Carbide

Surface Type

Helix

36º / 38º

Tolerance

With many applications, the complete milling process can be covered with one R F 100 as well as increasing tool life and dimensional accuracy of the workpiece generates a considerable cost advantage.

h10

Summary of advantages suitable for roughing and finishing up to 60% higher feed rates up to 4-times longer tool life vibration-free operation improved workpiece surface quality

• • • • •

l2 l1

with neck clearance

6.000 8.000 10.000 12.000 16.000 20.000

57.00 63.00 72.00 83.00 92.00 104.00

13.00 19.00 22.00 26.00 32.00 38.00

Z 4 4 4 4 4 4

Availability • • • • • •

HIGH-PERFoRMANCE 4 Flute Metric roughing end mills - Carbide

RF 100 VA high-performance roughing end mills for stainless steels

RF 100 VA high performance ROUGHING END MILLS for stainless steel 4 FLUTE Metric STD. LENGTH - carbide

36º 38º

MILLING CUTTERS

micro corner protection for longer tool life

137

Guhring no.

Based on our RF 100 end mill with unequal helix angles in combination with a newly developed roughing geometry. The result is a dramatic increase in tool life in comparison to conventional rough milling cutters with round or flat knuckletype teeth. At the same time. the surface quality of the workpiece is improved to a peak-to-valley height of appr. Ra = 2-3 μm. making in many cases finishing operations unnecessary.

3508

Standard

Guhring std.

Tool material

Solid Carbide

Surface Type

Helix

32º / 30º

Tolerance

h10

Simultaneously. the innovative design reduces power consumption in comparison to conventional RF 100 end mills allowing the application in unstable conditions and on less powerful machines. Summary of advantages low cutting pressure and power consumption vibration-free operation increased feed rates possible increased surface qualities (Ra = 2-3 µ m) longer tool life

• • • • •

l2 l3 l1

workpiece surface Ra = 2-3 μm

with neck clearance

30º 32º

MILLING CUTTERS 138

RF 100 U/HF high performance ROUGHING END MILLS 4 FLUTE METRIC STD. LENGTH RMR

HIGH-PERFoRMANCE 4 Flute Metric roughing end mills - Carbide

RF 100 U/HF high-performance roughing end mills for materials up to 1600 N/mm2 (48 HRC)

micro corner protection for longer tool life

13.00 19.00 22.00 26.00 32.00 38.00 45.00

21.00 27.00 32.00 38.00 44.00 54.00 65.00

6.000 8.000 10.000 12.000 16.000 20.000 25.000

5.500 57.00 7.500 63.00 9.200 72.00 11.200 83.00 15.000 92.00 19.000 104.00 24.000 121.00

Code no. 6,000 8,000 10,000 12,000 16,000 20,000 25,000

Availability • • • • • • •

Guhring no.

6709

3897

Standard

Guhring std.

Tool material

Solid carbide

Type

Helix

45º

Tolerance

h10

Surface

5 Flute Metric finishing end mills - Carbide

Metric finishing end mills 5 FLUTE STANDARD LENGTH FINISH - carbide

l2 l3 l1

4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000 25.000

6.000 6.000 6.000 8.000 10.000 12.000 16.000 20.000 25.000

3.700 4.700 5.500 7.500 9.200 11.200 15.000 19.000 23.500

57.00 57.00 57.00 63.00 72.00 83.00 92.00 104.00 121.00

11.00 13.00 13.00 19.00 22.00 26.00 32.00 38.00 45.00

18.00 18.00 21.00 27.00 32.00 38.00 44.00 54.00 65.00

4,000 5,000 6,000 8,000 10,000 12,000 16,000 20,000 25,000

4.000 5.000 6.000 8.000 10.000 12.000 16.000 20.000

6.000 6.000 6.000 8.000 10.000 12.000 16.000 20.000

3.700 5.700 5.500 7.500 9.200 11.200 15.000 19.000

65.00 65.00 65.00 75.00 80.00 93.00 108.00 126.00

12.00 15.00 18.00 24.00 30.00 36.00 48.00 60.00

23.00 26.00 29.00 39.00 40.00 48.00 60.00 76.00

4,000 5,000 6,000 8,000 10,000 12,000 16,000 20,000

Code no.

Availability • • • • • • • • •

• • • • • • • •

MILLING CUTTERS

139

Standard Tool material

Guhring no.

3466

Standard

DIN 327 D

Tool material

M42

Surface N

Type

Helix

30º

Helix

30º

Tolerance

h10

e8/h10

4.000 6.000 8.000 10.000 12.000 16.000 20.000

6.000 6.000 10.000 10.000 12.000 16.000 20.00

51.00 52.00 61.00 63.00 73.00 79.00 88.00

7.00 8.00 11.00 13.00 16.00 19.00 22.00

DIN 6527 L Solid carbide

Surface

3679

Type Tolerance

Metric ball nose slot drill - HSCO - CARBIDE

Guhring no.

MILLING CUTTERS 140

2 Flute METRIC BALL NOSE STANDARD LENGTH - CARBIDE

2 Flute Metric ball nose STANDARD LENGTH - HSCO

z 2 2 2 2 2 2 2

Availability • • • • • • •

0.500 0.800 1.000 1.500 2.000 3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

3.000 3.000 3.000 3.000 6.000 6.000 6.000 6.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

38.00 38.00 38.00 38.00 57.00 57.00 57.00 57.00 57.00 63.00 72.00 83.00 83.00 92.00 92.00 104.00

1.00 1.00 2.00 3.00 6.00 7.00 8.00 10.00 10.00 16.00 19.00 22.00 22.00 26.00 26.00 32.00

z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Availability • • • • • • • • • • • • • • • •

Guhring no.

3359

Standard

Guhring std.

Standard

Guhring std.

Tool material

Solid carbide

Tool material

Solid carbide

Surface

Surface H

Type

Helix

30º

Helix

30º

Tolerance

Type

Ø 6-16 mm

3360

Ø 6-16 mm

0.500 0.800 1.000 1.500 2.000 3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000

3.000 3.000 3.000 3.000 6.000 6.000 6.000 6.000 6.000 8.000 10.000 12.000 16.000

38.00 38.00 38.00 38.00 57.00 57.00 57.00 57.00 57.00 63.00 72.00 83.00 92.00

0.75 1.20 1.50 2.25 3.00 5.00 6.00 8.00 9.00 12.00 15.00 18.00 24.00

Metric ball nose slot drills - CARBIDE

FOR MATERIALS <62 HRC 2 Flute Metric ball nose EX LONG - CARBIDE

FOR MATERIALS <62 HRC 2 Flute Metric ball nose STANDARD LENGTH - CARBIDE

Availability • • • • • • • • • • • • •

3.000 4.000 5.000 6.000 8.000 10.000 12.000 16.000

6.000 6.000 6.000 6.000 8.000 10.000 12.000 16.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00 150.00

5.00 6.00 8.00 9.00 12.00 15.00 18.00 24.00

Availability • • • • • • • •

MILLING CUTTERS 141

Guhring no. Standard Tool material

4 Flute Metric ball nosE EX LONG - CARBIDE 3727

Guhring no.

3050

Standard

Guhring std. Solid carbide

Surface N

Type

Helix

30º

Helix

30º

Tolerance

h10

Tolerance

h10

Type

MILLING CUTTERS 142

3043

Tool material

DIN 6528 Solid carbide

Surface

4 Flute Metric ball nose end mills

4 Flute Metric ball nose STANDARD LENGTH - CARBIDE

3.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

6.000 4.000 5.000 6.000 8.000 10.000 12.000 14.000 16.000 18.000 20.000

57.00 50.00 50.00 57.00 63.00 72.00 83.00 83.00 92.00 92.00 104.00

8.00 11.00 13.00 13.00 19.00 22.00 26.00 26.00 32.00 32.00 38.00

z 4 4 4 4 4 4 4 4 4 4 4

Availability • • • • • • • • • • •

3.000 4.000 5.000 6.000 8.000 10.000 12.000

75.00 75.00 75.00 75.00 100.00 100.00 150.00

20.00 25.00 30.00 30.00 40.00 40.00 45.00

z 4 4 4 4 4 4 4

Availability • • • • • • •

Guhring no.

6711

2 Flute engraving tool - carbide Guhring no.

6713

5006

Standard

Guhring std.

Standard

Guhring std.

Tool material

Solid carbide

Tool material

Solid carbide

Surface

Type

Angle

60°

90°

Angle

30º

Tolerance

30°

Engraving tool

l2 l1

4.000 6.000 8.000 10.000 12.000

50.00 57.00 63.00 63.00 80.00

22.00 21.00 27.00 32.00 38.00

4 4 4 4 4

Availability • • • • •

• • • • •

3.000

38.00

0.70

r 0.30

Metric chamfer cutter - Carbide

Metric Chamfering Milling cutters

Availability •

Also available in 120º (Part no. 6714) on request

MILLING CUTTERS 143

RF 100 high-performance end mills excel thanks to unequal helix angles which considerably reduces vibration. The unequal helix angle vastly improves surface quality for finishing operations and a considerably higher feed rates for slot drilling and roughing operations are possible. 30º 32º

Summary of advantages: • suitable for roughing and finishing • up to 60% higher feed rates • up to 4-times longer tool life • vibration-free operation • improved workpiece surface quality

Type N

400

RF 100

400

300

Ff in [N]

RF 100 high-performance MILLING CUTTERS

RF 100 high-performance end mills the best solution for material specific milling

200 100

300 200 100 0

0 0

0.5

1.0

1.5

2.0

Milling length section [mm]

micro corner protection for longer tool life

0.5

1.0

1.5

2.0

Milling length section [mm]

The cutting force comparison between a conventional milling cutter type N and a RF100 clearly shows the quieter, more rigid operation of the RF100.

Type

Roughing end mill

Output (kW)

20 15

RF 100 U, A, VA

RF 100 U/HF, VA/NF, A/WF

Performance index

100%

140%

Workpiece surface

Ra = 9-10 µm

Ra = 2-3 µm

Tool life index

100%

180%

Power consumption

100%

130%

Cutting pressure

100%

125%

10 5 RF 100 U/HF, VA/NF, A/WF

1000

2000

Feed rate (VF mm/min)

3000

Based on our RF 100 end mill with unequal helix angles in combination with a newly developed roughing geometry we have develloped special RF 100 roughing end mills. 35º

MILLING CUTTERS

38º

At the same time, the innovative design reduces power consumption in comparison to conventional RF 100 end mills allowing the application in unstable conditions and on less powerful machines. Summary of advantages: • decreased cutting pressure and power consumption • vibration-free operation • higher feed rates possible • increased surface quality (Ra = 2-3 μm) • improved tool life • simple chip evacuation micro corner protection for longer tool life

144

The result is a drastic increase in tool life in comparison to conventional rough milling cutters with round or flat knuckle-type teeth. At the same time the surface quality of the workpiece is improved to a peak-to-valley height of appr. Ra = 2-3 μm, making in many cases finishing operations unnecessary.

Feed rate adjustment:

Application

Modifying the cutting depth and width • when modifying the cutting depth ap, the feed rate must be reduced in accordance with the illustration on the right • cutting speed or revolutions remain unchanged up to cutting depths of 3 x D, must only be adapted over 3xD • double reduction applies when also modifying the cutting width ae!

Width of cut

Slot Milling Operations Milling of slots or keyways, ramp milling or plunging. 1xD Roughing Operations Removing material in large cuts, pocket milling including ramping.

0.5 - 1 x D

Finishing Operations Side milling with smaller cutting width but better workpiece surface quality.

ae = 1 x D fz = 25 %

ae = 0.5 x D fz = 50 %

Milling correction factor information

milling correction factor information

0.1 - 0.2 x D

Fine Finishing Operations

ae = 0.25 x D fz = 100 %

Side milling with yet smaller cutting width but yet better workpiece surface quality.

0.02 - 0.05 x D

Trace Milling Operations

Radius

Tracing or 3D copying with extremely small cutting width or depth.

0.02 - 0.05 X D Torus

ap = 1 x D fz = 100 %

ap = 2 x D fz = 50 %

ap = 3 x D fz = 25 %

D - 2xR 2

For drilling: • reduce feed rate vf (mm/min.) Attention: Danger of breakage through abrupt load increase!

Drilling

Oblique plunging Helical plunging ≤ 15° 15°...30°

Oblique plunging up to 15º (preferred): • reduction in feed rate vf (mm/min.) not required Oblique plunging between 15º and 30º: • reduce feed rate vf (mm/min.) Helical plunging: • feed 0.1 to 0.2 per cycle • reduce feed rate vf (mm/min.) • hole diameter 1.8 x D

90° fz -70 %

≤ 15° fz = 100 %

15°...30° fz -30 %

MILLING CUTTERS

Plunging strategies

fz -15 %

145

Cutting speed recommendation - milling

Tool Material

CUTTING SPeed recommendation Milling

M42

Surface Finish Type Guhring No.

3451

3428

3459

3453

3431

3460

No. Cutting Edges

2 Flute

4 Flute

3 Flute

Application

DIN 844

vc Feed m/min col.no.

Feed Column No. Drill ø mm

f (mm/rev) 2.00

0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.020

3.00

0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.030

5.00

0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.038

6.00

0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.041 0.047

8.00

0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.042 0.042 0.047 0.053 0.052 0.058 0.064

10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.080 12.00 0.010 0.018 0.022 0.026 0.030 0.036 0.046 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.100 16.00 0.020 0.023 0.027 0.032 0.038 0.045 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.120 20.00 0.023 0.028 0.033 0.038 0.045 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.140 25.00 0.030 0.035 0.040 0.045 0.055 0.065 0.075 0.100 0.120 0.130 0.140 0.150 0.165 0.170 0.180 0.190

Coolant

Soluble Oil

Oil

Air

Material Group

Material Examples

Tens. Strength (N/mm2)

Common Structural Steels

Mild steel, Grade 250 plate, Grade 350 plate

≤ 500

25-31

22-28

25-31

> 500-850

21-27

19-25

21-27

≤ 850

21-27

19-25

21-27

850-1000

16-25

18-22

16-25

≤ 700

25-31

22-28

25-31

700-850

22-28

20-26

22-28

850-1000

19-25

18-22

19-25

850-1000

19-25

18-22

19-25

1000-1200

15-19

13-17

15-19

≤ 750

25-31

22-28

25-31

850-1000

19-25

18-22

19-25

N33, EN36A

1000-1200

15-19

13-17

15-19

1.8504 34CrAI6, 1.8519 31CrMo V9, 1.8550 34CrAINi7

≥ 850-1000

19-25

18-22

19-25

1000-1200

15-19

13-17

15-19

≤ 850

25-31

22-28

25-31

850-1000

9-13

9-11

9-13

≥ 650-1000

9-13

9-11

9-13

9-11

Free-Cutting Steels Unalloyed Heat-Treatable Steels

1020, S1214, S1213, S12L13, S12L14

1035, 1045, 1055, 1060, 1025

Alloyed Heat-Treatable Steels 3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26 Unalloyed Case Hardened Steels

1010, 1015

Alloyed Case Hardened Steels 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, Nitriding Steels Tool Steels

H11, H13, P20, D2, D3

Hardness

Coolant

High Speed Steels

M2, M3, M35, M45

Spring Steels

5155, 6150, 9255

Stainless Steels, Sulphured

410S, 430F, 630

≤ 850

16-20

14-18

16-20

Austenitic

302, 303, 304, 310, 316, 316Ti, 321

≤ 850

11-15

10-14

11-15

Martensitic

410, 410X, 416, 420, 420C, 431, 440C

≤ 850

11-15

10-14

11-15

Hardened Steels

Special Alloys

Nimonic, Inconel, Monel, Hastelloy, Bisalloy

3-5

Cast Iron

GG10, GG15, GG20, GG25, GG30, GG35, GG40

18-22

16-20

18-22

10-14

38 18-22

≤ 330 HB

≤ 40-48 HRC > 48-60 HRC ≤ 1200 ≤ 240 HB ≤ 300 HB

MILLING CUTTERS

Spheroidal Graphite and Malleable Cast Iron

GGG40, GGG50, GGG60, GGG70, 32510, 50005, Nodular Iron

Chilled Cast Iron

Ti and Ti-alloys

3.7024 Ti99,5, 3.7114 TiAI5Sn2,5, 3.7124 TiCu2

≤ 850

3.7154 TiAI6Zr5, 3.7164 TiAI6V4, 3.7184 TiAI4Mo4Sn2,5, -TiAI8Mo 1V1

850-1200

AI and Ti-alloys

3.0255 AI99,5, 3.2315 AIMgSi1, 3.3515 AIMg1

≤ 400

138-170

AI Wrought Alloys

3.0615 AIMgSiPb, 3.1325 AICiMg1, 3.3245 AIMg3Si, 3.4365 AIZnMgCu1,5

≤ 450

99-121

AI Cast Alloys ≤ 10 % Si

3.2131 G-AISi5Cu1, 3.2153 G-AISi7Cu3, 3.2573 G-AISi9

≤ 600

AI Cast Alloys >10 % Si

3.2581 G-AISi12, 3.2583 G-AISi12Cu, -GAISi12CuNiMg

Magnesium Alloys

MgMn2, G-MgAI8Zn1, G-MgAI6Zn3

Copper, Low-Alloyed

18-22

≤ 300 HB ≤ 350 HB

16-20

10-14

9-13

9-11

9-13

5-7

9-13

125-153

89-109

138-170

71-87

99-121

79-97

36-44

79-97

≤ 600

39-49

53-65

39-49

≤ 450

59-73

49-61

59-73

2.0070 SE-Cu, 2.1020 CuSn6, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb

≤ 450

54-68

49-61

54-68

Brass, Short-Chipping

2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2

≤ 600

54-68

31-39

54-68

Brass, Long-Chipping

2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5

≤ 600

35-43

31-39

35-43

Bronze, Short-Chipping

2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

≤ 600

35-43

31-39

35-43

2.0790 CuNi18Zn19Pb

> 600 -850

29-37

27-33

29-37

2.0916 CuAI5, 2.0960 CuAI9Mn, 2.1050 CuSn10

≤ 850

29-37

27-33

29-37

2.0980 CuAI11Ni, 2.1247 CuBe2

850-1000

15-19

13-17

15-19

Bronze, Long-Chipping

146

≤ 240 HB

Duroplastics

Bakelit, Resopal, Pertinax, Moltopren

Thermoplastics

Plexiglas, Hostalen,Novodur, Makralon

Carbide

Ratio

NRf

3472

5735

3649

3803

6709

3676

5506

3892

3043

3359

3508

3473

5582

5556

3897

5549

5574

3727

3360

5743

3808

2 Flute

4 Flute

5 Flute

2 Flute

3 Flute

4 Flute

2-4 Flute

2 Flute

4 Flute

DIN 6527

DIN 6527 L

DIN 6527

DIN 6527L

DIN 6527

vc m/min

Feed col. no.

vc m/min

5680

Feed col. no.

vc m/min

Feed col. no.

vc m/min

Feed col. no.

vc m/min

Feed col. no.

vc m/min

Feed col. no.

vc m/min

3679

Feed col. no.

vc m/min

Feed col. no.

vc m/min

Feed col. no.

vc m/min

Feed col. no.

vc m/min

Feed col. no.

170-208

110-136

171-209

85-105

94-116

200

97-119

157-193

102-126

157-193

81-99

89-109

200

90-110

170-208

110-136

171-209

85-105

94-116

180

97-119

126-154

81-101

126-154

63-77

69-85

180

72-88

170-208

110-136

171-209

85-105

94-116

180

97-119

151-185

98-120

153-187

76-94

84-104

180

86-106

126-154

81-101

126-154

63-77

69-85

180

72-88

151-185

98-120

153-187

76-94

84-104

160

86-106

126-154

81-101

126-154

63-77

69-85

160

72-88

189-231

123-151

189-231

98-110

99-121

180

108-132

151-185

98-120

153-187

76-94

84-104

160

86-106

113-139

73-91

117-143

54-66

59-73

160

64-80

170-208

110-136

171-209

85-105

94-116

180

97-119

151-185

98-120

153-187

76-94

84-104

160

86-106

151-185

98-120

153-187

76-94

84-104

160

86-106

126-154

81-101

126-154

63-77

69-85

110

72-88

94-116

61-75

54-66

94-116

45-55

49-61

110

94-116

45-55

49-61

110

94-116

140

94-116

45-55

49-61

140

54-66

81-101

120

81-99

40-50

45-55

120

46-58

100

75-93

76-94

36-44

39-49

100

43-53

44-54

49-61

45-55

49-61

25-31

18-22

56-70

54-66

27-33

29-37

32-40

220-270

143-175

220-270

108-132

118-146

180

126-154

201-247

131-161

202-248

99-121

108-134

160

115-141

118-146

180-220

90-110

99-121

180

104-128

102-126

157-193

81-99

89-109

160

90-110

107-131

69-85

54-66

59-73

110

94-116

61-75

94-116

45-55

49-61

54-66

75-93

49-61

76-94

36-44

39-49

43-53

297-363

3191001

532-652

810-990

405-495

445-545

3001000

360-440

10081232

655-801

720-880

495-605

544-666

10001200

144-176

403-493

261-321

405-495

198-242

217-267

450

117-143

315-385

205-251

324-396

162-198

178-218

350

171-209

466-570

303-371

450-550

225-275

247-303

500

81-99

214-262

139-171

216-264

108-132

117-146

300

72-88

201-247

131-161

198-242

90-110

99-121

250

67-83

163-201

106-130

153-187

81-99

89-109

250

72-88

201-247

131-161

198-242

90-110

99-121

250

63-77

151-185

98-120

153-187

72-88

79-97

250

63-77

151-185

153-187

72-88

79-97

200

54-66

126-154

63-77

69-85

200

81-99

214-262

216-264

108-132

118-146

200

72-88

201-247

198-242

99-121

108-134

200

MILLING CUTTERS

184-224 157-193

Cutting speed recommendation - milling

Carbide

147

REAMERS

Guhring no. Standard Tool material

413 DIN 206 HSS

Surface Form

Cutting direction

Tolerance

Metric HAND reamers - HSS

METRIC HAND REAMERS - HSS

l4 l1

5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

87.00 93.00 107.00 115.00 124.00 133.00 142.00 152.00 152.00 163.00 163.00 175.00 175.00 188.00 188.00 201.00

44.00 47.00 54.00 58.00 62.00 66.00 71.00 76.00 76.00 81.00 81.00 87.00 87.00 93.00 93.00 100.00

3.80 4.90 5.50 6.20 7.00 8.00 9.00 9.00 10.00 11.00 12.00 12.00 13.00 14.50 14.50 16.00

z 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8

Availability • • • • • • • • • • • • • • • •

REAMERS 149

Guhring no.

468

Standard Tool material

5004 DIN 212

HSS-E

Form

Cutting direction

Tolerance

Surface

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l2 l1

d1 mm

REAMERS

4.000 4.500 5.000 5.500 6.000 6.500 7.000 8.000 9.000 10.000 11.000 12.000 13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000

12.700 14.287 15.875 19.050 22.225 25.400

150

inch

1/2 9/16 5/8 3/4 7/8 1

4.000 4.500 5.000 5.600 5.600 6.300 7.100 8.000 9.000 10.000 10.000 10.000 10.000 12.500 12.500 12.500 14.000 14.000 16.000 16.000

75.00 80.00 86.00 93.00 93.00 101.00 109.00 117.00 125.00 133.00 142.00 151.00 151.00 160.00 162.00 170.00 175.00 182.00 189.00 195.00

43.00 47.00 52.00 57.00 57.00 63.00 69.00 75.00 81.00 87.00 96.00 105.00 105.00 110.00 112.00 120.00 123.00 130.00 131.00 137.00

19.00 21.00 23.00 26.00 26.00 28.00 31.00 33.00 36.00 38.00 41.00 44.00 44.00 47.00 50.00 52.00 54.00 56.00 58.00 60.00

6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8

10.000 12.500 12.500 16.000 18.000 20.000

151.00 162.00 170.00 189.00 217.00 234.00

111.00 117.00 125.00 141.00 161.00 174.00

44.00 50.00 52.00 58.00 66.00 70.00

6 8 8 8 8 8

Availability • • • • • • • • • • • • • • • • • • • •

• • • • • •

Guhring no. Standard Tool material

496 DIN 212 HSS-E

Surface Form Cutting direction

rh -0/+0.005

Tolerance

B/D

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l1 Available in .01mm increments on request d1 mm

1/18

1.00 1.10 1.10 1.20 1.30 1.40 1.40 1.50 1.60 1.60 1.60 1.70 1.80 1.80 1.90 1.90 2.00 2.00 2.10 2.10 2.10 2.20 2.30 2.50 2.50 2.50 2.50 2.50 2.50 2.80 2.80 3.00 3.00

34.00 34.00 34.00 38.00 38.00 38.00 40.00 40.00 43.00 43.00 43.00 43.00 46.00 46.00 46.00 46.00 49.00 49.00 49.00 49.00 49.00 53.00 53.00 57.00 57.00 57.00 57.00 57.00 57.00 61.00 61.00 61.00 61.00

5.50 5.50 5.50 7.50 7.50 7.50 8.00 8.00 9.00 9.00 9.00 9.00 10.00 10.00 10.00 10.00 11.00 11.00 11.00 11.00 11.00 12.00 12.00 14.00 14.00 14.00 14.00 14.00 14.00 15.00 15.00 15.00 15.00

z 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

REAMERS

1.000 1.020 1.100 1.200 1.300 1.320 1.400 1.500 1.520 1.590 1.600 1.700 1.780 1.800 1.870 1.900 1.990 2.000 2.010 2.020 2.100 2.200 2.300 2.400 2.490 2.500 2.520 2.530 2.600 2.700 2.800 2.900 2.960

inch

151

Guhring no. Standard Tool material

496 DIN 212 HSS-E

Surface Form Cutting direction

B/D rh -0/+0.005

Tolerance

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l1 Available in .01mm increments on request d1 mm

REAMERS 152

2.980 2.990 3.000 3.010 3.020 3.100 3.170 3.180 3.200 3.300 3.370 3.380 3.400 3.480 3.500 3.520 3.570 3.600 3.700 3.730 3.760 3.800 3.900 3.970 3.980 3.990 4.010 4.020 4.030 4.100 4.150 4.200 4.300

inch

1/8

9/64

5/32

3.00 3.00 3.00 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.50

61.00 61.00 61.00 65.00 65.00 65.00 65.00 65.00 65.00 65.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 80.00

15.00 15.00 15.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 18.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 21.00

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Guhring no. Standard Tool material

496 DIN 212 HSS-E

Surface Form Cutting direction

rh -0/+0.005

Tolerance

B/D

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l1 Available in .01mm increments on request d1

inch

4.370 4.400 4.600 4.700 4.750 4.760 4.800 4.900 4.980 4.990 5.010 5.020 5.040 5.100 5.200 5.300 5.400 5.500 5.600 5.700 5.800 5.900 5.980 5.990 6.010 6.020 6.100 6.200 6.300 6.340 6.350 6.370 6.400

11/64

4.50 4.50 4.50 4.50 4.50 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.60 5.60 5.60 5.60 5.60 5.60 5.60 5.60 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30 6.30

80.00 80.00 80.00 80.00 80.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 86.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 93.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00 101.00

21.00 21.00 21.00 21.00 21.00 23.00 23.00 23.00 23.00 23.00 23.00 23.00 23.00 23.00 23.00 23.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00 28.00

3/16

1/4

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

REAMERS

153

Guhring no. Standard Tool material

496 DIN 212 HSS-E

Surface Form Cutting direction

B/D rh -0/+0.005

Tolerance

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l1 Available in .01mm increments on request d1 mm

REAMERS 154

6.500 6.600 6.700 6.800 6.900 7.020 7.100 7.140 7.200 7.300 7.400 7.500 7.600 7.700 7.800 7.900 7.930 7.940 7.980 8.010 8.020 8.030 8.100 8.200 8.300 8.400 8.500 8.600 8.700 8.730 8.800 8.900 8.960

inch

9/32

5/16

11/32

6.30 6.30 6.30 7.10 7.10 7.10 7.10 7.10 7.10 7.10 7.10 7.10 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 9.00 9.00 9.00 9.00 9.00 9.00

101.00 101.00 101.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 109.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 117.00 125.00 125.00 125.00 125.00 125.00 125.00

28.00 28.00 28.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 33.00 36.00 36.00 36.00 36.00 36.00 36.00

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Guhring no. Standard Tool material

496 DIN 212 HSS-E

Surface Form Cutting direction

rh -0/+0.005

Tolerance

B/D

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l1 Available in .01mm increments on request d1 mm

3/8

13/32

7/16

9.00 9.00 9.00 9.00 9.00 9.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00

125.00 125.00 125.00 125.00 125.00 125.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 133.00 142.00 142.00 142.00 142.00 142.00 142.00 142.00

36.00 36.00 36.00 36.00 36.00 36.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 38.00 41.00 41.00 41.00 41.00 41.00 41.00 41.00

z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

Availability • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

REAMERS

8.980 9.100 9.200 9.300 9.400 9.500 9.520 9.530 9.540 9.600 9.700 9.800 9.900 9.980 9.990 10.010 10.020 10.030 10.100 10.200 10.300 10.320 10.400 10.500 10.530 10.600 10.700 10.800 10.900 11.020 11.100 11.110 11.200

inch

155

Guhring no. Standard Tool material

496 DIN 212 HSS-E

Surface Form Cutting direction

B/D rh -0/+0.005

Tolerance

Metric & imperial reamers - HSS-E

machine chucking reamers - HSS-E

l4 l1

d1 mm 11.300 11.400 11.500 11.600 11.700 11.800 11.900 11.980 11.990 12.020 12.040

inch

10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00

142.00 142.00 142.00 142.00 142.00 142.00 151.00 151.00 151.00 151.00 151.00

41.00 41.00 41.00 41.00 41.00 41.00 44.00 44.00 44.00 44.00 44.00

z 6 6 6 6 6 6 6 6 6 6 6

Availability • • • • • • • • • • •

Available in 0.01mm increments on request

REAMERS 156

Guhring no. Standard Tool material

405 DIN 208 HSS-E

Surface B

Cutting direction

Tolerance

Form

Metric reamers TAPER SHANK - HSS-E

machine REAMERS TAPER SHANK - HSS-E

MT l4 l2 l1

d1 mm

1 1 2 2 2 2 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 4 4

182.00 189.00 204.00 210.00 214.00 219.00 223.00 228.00 232.00 237.00 241.00 268.00 268.00 273.00 277.00 281.00 317.00 321.00 321.00 325.00 329.00 329.00 344.00

120.00 127.00 129.00 135.00 139.00 144.00 148.00 153.00 157.00 162.00 166.00 174.00 174.00 179.00 183.00 187.00 199.50 203.50 203.50 207.50 211.50 211.50 226.50

44.00 47.00 50.00 52.00 54.00 56.00 58.00 60.00 62.00 64.00 66.00 68.00 68.00 70.00 71.00 73.00 77.00 78.00 78.00 79.00 81.00 81.00 86.00

z 6 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 12

Availability • • • • • • • • • • • • • • • • • • • • • • •

REAMERS

13.000 14.000 15.000 16.000 17.000 18.000 19.000 20.000 21.000 22.000 23.000 24.000 25.000 26.000 28.000 30.000 32.000 34.000 35.000 36.000 38.000 40.000 50.000

157

Guhring no. Standard Tool material Carbide grade

1409 Guhring std. Carbide K10

Surface Form

B rh

Tolerance

Cutting direction

machine chucking reamers - Carbide

MACHINE CHUCKING REAMERS - CARBIDE

l4 l2 l1

REAMERS 158

1.000 2.000 3.000 4.000 5.000 6.000 7.000 8.000 9.000 10.000 11.000 12.000 14.000 16.000 20.000

1.000 2.000 3.000 4.000 5.000 5.600 7.100 8.000 9.000 10.000 10.000 10.000 12.000 12.000 16.000

34.00 49.00 61.00 75.00 86.00 93.00 109.00 117.00 125.00 133.00 142.00 151.00 160.00 170.00 195.00

10.50 16.00 20.00 43.00 52.00 57.00 69.00 75.00 81.00 87.00 96.00 105.00 110.00 120.00 137.00

5.50 11.00 15.00 19.00 23.00 26.00 31.00 33.00 36.00 38.00 41.00 44.00 47.00 52.00 60.00

z 3 4 6 6 6 6 6 6 6 6 6 6 6 6 6

Availability • • • • • • • • • • • • • • •

Guhring no. Standard Tool material Carbide grade

720 Guhring std. Carbide K10

Surface Form

Cutting direction

Tolerance

Metric reamers TAPER SHANK - Carbide

MACHINE REAMERS TAPER SHANK - CARBIDE

MT l4 l2 l1

d1 mm 20.000 22.000 24.000 25.000 26.000 30.000

MT 2 2 3 3 3 3

228.00 237.00 268.00 268.00 273.00 281.00

153.00 162.00 174.00 174.00 179.00 187.00

19.00 22.00 22.00 22.00 22.00 25.00

z 6 6 8 8 8 8

Availability • • • • • •

REAMERS 159

Guhring no.

1685

Standard

Guhring std.

Tool material

Solid Carbide

Carbide grade

k10

Surface Form

S rh

Tolerance

Cutting direction

Metric HIGH performance Machine reamers - Carbide

HIGH performance Machine reamers - CARBIDE

l4 l2 l1

6.000 8.000 10.000 12.000

76.00 101.00 101.00 130.00

40.00 65.00 20.00 43.00

5.50 11.00 61.00 85.00

z 4 6 6 6

Availability • • • •

Other sizes available on request

REAMERS 160

HIGH-PERFORMANCE REAMERS - SPECIAL DESIGNS FOR ø > 40mm

Special solution HR 500 GT carbide- or cermet-tipped high-performance reamers - special designs for Ø > 40 mm Also above 40 mm diameter Guhring‘s HR 500 technology is the first choice for high-performance reaming. Numerous intelligent solutions ensure that even with these large diameters optimal quality is guaranteed:

Diversity for perfect machining results HR 500 GT tool heads are available as a semi-standard with short delivery for the diameter range > 40 to 75 mm. The following material specific designs with individually optimised cutting edge geometry are available:

Secure clamping

REAMERS

• Carbide-tipped with nanoA-coating for stainless steels, GGG 60, special alloys and non-ferrous metals • Carbide-tipped with nanoA Cast-coating for GG • Cermet-tipped for steels and GGG 40/50 We also manufacture special tools to customer specification upon request.

For the secure clamping of the HR 500 GT tool head the straight shank is also fitted with a tang. Special, particularly slimGuhring hydraulic chucks, gauge lengths 150 and 250 mm and Ø 25 and 30 mm possess a corresponding internal contour in which the shank sits perfectly and securely. For short reaming depths HR 500 GT tool heads can also be clamped in conventional hydraulic chucks with maximum accuracy. In all cases, handling is very simple and flexible.

Optimal cooling lubrication Thanks to the TiN-coated positioning screw on the face of the HR 500 GT tool head the cooling lubricant accurately reaches the cutting edges. A blocking of the coolant exits by chips during the machining process is impossible due to the very flat construction of the positioning screw. It is, however, possible to machine blind holes directly up to the base of the hole.

161

Cutting speed recommendation - REAMING

Tool Material

Cutting speed recommendation REAMING Drill ø mm

f (mm/rev)

<4.00 0.080 0.100 0.125 0.300 0.500 0.800 1.000 4.00

0.100 0.125 0.160 0.300 0.500 1.000 1.200

5.00

0.100 0.125 0.160 0.400 0.600 1.000 1.400

6.30

0.125 0.160 0.200 0.400 0.700 1.200 1.600

8.00

0.160 0.200 0.250 0.600 1.000 1.800 2.400

10.00 0.200 0.250 0.315 0.600 1.200 1.800 2.400 12.50 0.200 0.250 0.315 0.800 1.200 2.000 2.500 16.00 0.250 0.315 0.400 0.800 1.400 2.200 2.600 20.00 0.315 0.400 0.500 0.800 1.400 2.200 2.600 25.00 0.400 0.500 0.630 1.000 1.600 3.500 3.000 31.50 0.400 0.500 0.630 1.000 2.000 3.000 3.600 40.00 0.500 0.630 0.800 1.200 2.000 3.000 3.600 50.00 0.630 0.800 1.000 1.400 2.200 3.200 3.600

Drill ø mm

YES

212

208

8093

8051

Guhring std.

vc m/min

Feed col.no.

vc m/min

Feed col.no.

vc m/min

Feed col.no.

0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.150

4.00

0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.180

5.00

0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.257

6.30

0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.308

8.00

0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.370

10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.440 12.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.523 16.00 0.100 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.633 20.00 0.125 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.752 25.00 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 0.893

Coolant

1020, S1214, S1213, S12L13, S12L14

Unalloyed Heat-Treatable Steels 1035, 1045, 1055, 1060, 1025

3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

Unalloyed Case Hardened Steels 1010, 1015 3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A 1.8504 34CrAI6, 1.8519 31CrMo V9, 1.8550 34CrAINi7 H11, H13, P20, D2, D3

Soluble Oil Tens. Strength (N/mm2)

Oil

Hardness

Air Coolant

≤ 500

120-250

75-76

> 500-850

120-250

75-76

≤ 850

120-250

75-76

850-1000

120-250

75-76

≤ 700

120-250

75-76

700-850

120-250

75-76

850-1000

120-250

75-76

850-1000

120-250

75-76

1000-1200

120-250

75-76

≤ 750

120-250

75-76

850-1000

120-250

75-76

1000-1200

120-250

75-76

≥ 850-1000

120-250

75-76

1000-1200

120-250

75-76

≤ 850

120-250

75-76

850-1000

120-250

75-76

≥ 650-1000

60-120

75-76

30-60

73-74

High Speed Steels

M2, M3, M35, M45

Spring Steels

5155, 6150, 9255

Stainless Steels, Sulphured

410S, 430F, 630

≤ 850

60-120

74-75

Austenitic

302, 303, 304, 310, 316, 316Ti, 321

≤ 850

40-80

74-75

Martensitic

410, 410X, 416, 420, 420C, 431, 440C

≤ 850

60-120

74-75

Hardened Steels

40-60

73-74

Special Alloys

Nimonic, Inconel, Monel, Hastelloy, Bisalloy

Cast Iron

GG10, GG15, GG20, GG25, GG30, GG35, GG40

≤ 330 HB

≤ 40-48 HRC > 48-60 HRC

30-60

73-74

40-60

74-75

≤ 240 HB

60-140

75-76

≤ 300 HB

60-140

75-76 75-76

≤ 1200

REAMERS

Spheroidal Graphite and Malleable Cast Iron

GGG40, GGG50, GGG60, GGG70, 32510, 50005, Nodular Iron

≤ 240 HB

120-250

≤ 300 HB

60-120

75-76

Chilled Cast Iron

≤ 350 HB

30-50

74-75

Ti and Ti-alloys

3.7024 Ti99,5, 3.7114 TiAI5Sn2,5, 3.7124 TiCu2

AI and Ti-alloys

3.7154 TiAI6Zr5, 3.7164 TiAI6V4, 3.7184 TiAI4Mo4Sn2,5, -TiAI8Mo 1V1 3.0255 AI99,5, 3.2315 AIMgSi1, 3.3515 AIMg1

≤ 850

40-80

74-75

850-1200

40-80

74-75

≤ 400

≤ 450

≤ 600

8 80-160

75-76

100-250

75-76

AI Cast Alloys ≤ 10 % Si

3.0615 AIMgSiPb, 3.1325 AICiMg1, 3.3245 AIMg3Si, 3.4365 AIZnMgCu1,5 3.2131 G-AISi5Cu1, 3.2153 G-AISi7Cu3, 3.2573 G-AISi9

AI Cast Alloys >10 % Si

3.2581 G-AISi12, 3.2583 G-AISi12Cu, -GAISi12CuNiMg

≤ 600

Magnesium Alloys

MgMn2, G-MgAI8Zn1, G-MgAI6Zn3

≤ 450

Copper, Low-Alloyed

Brass, Short-Chipping

2.0070 SE-Cu, 2.1020 CuSn6, 2.1020 CuSn6, 2.1096 ≤ 450 G-CuSn5ZnPb 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 ≤ 600

Brass, Long-Chipping

2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5

≤ 600

Bronze, Short-Chipping

2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

≤ 600

100-250

75-76

2.0790 CuNi18Zn19Pb

> 600 -850

100-250

75-76

2.0916 CuAI5, 2.0960 CuAI9Mn, 2.1050 CuSn10

≤ 850

2.0980 CuAI11Ni, 2.1247 CuBe2

850-1000

AI Wrought Alloys

Bronze, Long-Chipping

Duroplastics

Bakelit, Resopal, Pertinax, Moltopren

80-200

75-76

Thermoplastics

Plexiglas, Hostalen,Novodur, Makralon

80-200

75-76

Kevlar

80-200

75-76

80-200

75-76

Glass, carbon Concentr. Plastics GFK/CFK

162

1685

0.032 0.040 0.050 0.063 0.080 0.100 0.125 0.160 0.150

Mild steel, Grade 250 plate, Grade 350 plate

Tool Steels

2.50

Common Structural Steels

Nitriding Steels

3.15

Material Examples

Alloyed Case Hardened Steels

720

0.020 0.025 0.032 0.040 0.050 0.063 0.080 0.100 0.127

Material Group

Alloyed Heat-Treatable Steels

1409

B+D

Feed Column No. Reamers f (mm/rev)

>50.00 0.800 1.000 1.250 1.600 2.200 3.200 3.600

Free-Cutting Steels

405

Type DIN

2.00

Carbide

468

Internal Cooling

Carbide

Guhring No.

496

Feed Column No. High Performance Reamers 71

HSCO

Surface Finish

COUNTERSINKS & COUNTERBORES COUNTERSINKS

Guhring no. Standard Tool material

482 DIN 373 HSS

Surface Form

Metric counterbores - HSS

Metric counterbores - HSS parallel shank (3-flute)

l2 l1

mm 4.300 6.000 8.000 10.000 11.000 15.000 18.000 20.000

COUNTERBORES 164

2.200 3.200 4.300 5.300 6.400 8.400 10.500 13.000

4.300 5.000 5.000 8.000 8.000 12.500 12.500 12.500

56.00 71.00 71.00 80.00 80.00 100.00 100.00 100.00

10.00 14.00 14.00 18.00 18.00 22.00 22.00 22.00

Code no.

thread

4.300 6.000 8.000 10.000 11.000 15.000 18.000 20.000

M2 M3 M4 M5 M6 M8 M10 M12

Availability • • • • • • • •

Guhring no. Standard Tool material

485 Guhring std. HSS

Surface

Form

Metric counterbores - HSS

Metric counterbores - HSS taper shank (3-flute)

mm 26.000 30.000 33.000 40.000

17.00 19.00 21.00 25.00

MT 3 3 3 3

l2 l1

192.00 192.00 204.00 204.00

35.00 35.00 40.00 40.00

Code no.

thread

26.000 30.000 33.000 40.000

M16 M18 M20 M24

Availability • • • •

COUNTERBORES 165

Guhring no. Standard Tool material

476

5008

DIN 335 HSS

Carbide

Form

Angle

90º

90 o

Surface

90º countersinks - HSS

90º countersinks - HSS parallel shank (3-flute)

COUNTERSINKS 166

4.300 5.000 5.300 6.300 8.000 8.300 10.000 10.400 12.400 15.000 16.500 19.000 20.500 25.000 26.000 28.000 30.000 31.000

4.000 4.000 4.000 5.000 6.000 6.000 6.000 6.000 8.000 10.000 10.000 10.000 10.000 10.000 10.000 12.000 12.000 12.000

40.00 40.00 40.00 45.00 50.00 50.00 50.00 50.00 56.00 60.00 60.00 63.00 63.00 67.00 67.00 71.00 71.00 71.00

1.300 1.500 1.500 1.500 2.000 2.000 2.500 2.500 2.800 3.200 3.200 3.500 3.500 3.800 3.800 4.000 4.200 4.200

Code no. 4.300 5.000 5.300 6.300 8.000 8.300 10.000 10.400 12.400 15.000 16.500 19.000 20.500 25.000 26.000 28.000 30.000 31.000

Availability • • • • • • • • • • • • • • • • • • Coated also available on request

8.00 12.00 16.00 20.00 25.00

50.00 56.00 60.00 63.00 80.00

2.00 2.80 32.0 3.50 3.80

8.00 12.00 16.00 20.00 25.00

• • • • • Also 82º available on request

Guhring no. Standard Tool material

472 DIN 334 HSS

Surface C

Angle

60º

60 o

Form

60º countersinks - HSS

60º countersinks - HSS parallel shank (3-flute)

mm 6.300 8.000 12.500 16.000 20.000 25.000

5.000 6.000 8.000 10.000 10.000 10.000

45.00 50.00 56.00 63.00 67.00 71.00

1.600 2.000 3.200 4.000 5.000 6.300

Code no. 6.300 8.000 12.500 16.000 20.000 25.000

Availability • • • • • • Coated also available on request

COUNTERSINKS 167

Guhring no. Standard Tool material

477 DIN 335 HSS

Surface

d1 mm 31.000 34.000 37.000 40.000 50.000 63.000

MT 2 2 2 3 3 4

Form

Angle

90º

90 o

90º countersinks - HSS

90º countersinks - HSS TAPER SHANK (3-flute)

112.00 118.00 118.00 140.00 150.00 180.00

4.200 4.500 4.800 10.000 14.000 16.000

Code no. 31.000 34.000 37.000 40.000 50.000 63.000

Availability • • • • • • Coated also available on request

COUNTERSINKS 168

Tool Material

Feed Column No. Countersinking Tools Tool ø mm

2.00

0.03

0.04

Guhring No.

0.06

0.08

Surface Finish

DIN

f (mm/rev) 2.50

0.03

0.05

0.07

0.10

Guhring Std

3.15

0.03

0.05

0.08

0.11

Angle

4.00

0.04

0.06

0.09

0.13

5.00

0.04

0.07

0.10

0.14

6.30

0.04

0.07

0.12

0.15

8.00

0.05

0.08

0.13

0.16

10.00

0.06

0.09

0.14

0.17

12.50

0.06

0.10

0.15

0.19

16.00

0.07

0.11

0.17

0.21

20.00

0.08

0.13

0.18

0.23

25.00

0.09

0.15

0.21

0.26

31.50

0.12

0.17

0.24

0.30

40.00

0.14

0.21

0.28

0.34

50.00

0.17

0.24

0.31

0.36

63.00

0.20

0.27

0.33

0.38

80.00

0.23

0.30

0.35

0.40

100.00

0.25

0.30

0.35

0.40

HSS 472

HSS 476

482

477

334

335

60º

90º

485

373

YES

Material Group

Material Examples

Tens. Strength (N/mm2)

Common Structural Steels

Mild steel, Grade 250 plate, Grade 350 plate

≤ 500

> 500-850

≤ 850

850-1000

≤ 700

700-850

850-1000

1000-1200

Free-Cutting Steels Unalloyed Heat-Treatable Steels

Alloyed Heat-Treatable Steels

1020, S1214, S1213, S12L13, S12L14 1035, 1045, 1055, 1060, 1025

3140, 4130, 4140, 4150, 4340, 6150, EN16, EN26

Hardness

vc Feed Feed m/min col.no. col.no.

Unalloyed Case Hardened Steels

1010, 1015

≤ 750

Alloyed Case Hardened Steels

3310, 3415, 5115, 4615, 4620, 5120, 8617, 8620, N33, EN36A

850-1000

1000-1200

1.8504 34CrAI6, 1.8519 31CrMo V9, 1.8550 34CrAINi7

≥ 850-1000

1000-1200

≤ 850

850-1000

≥ 650-1000

Nitriding Steels Tool Steels

H11, H13, P20, D2, D3

High Speed Steels

M2, M3, M35, M45

Spring Steels

5155, 6150, 9255

Stainless Steels, Sulphured

410S, 430F, 630

≤ 850

Austenitic

302, 303, 304, 310, 316, 316Ti, 321

≤ 850

Martensitic

410, 410X, 416, 420, 420C, 431, 440C

≤ 850

Hardened Steels

≤ 40-48 HRC

> 48-60 HRC

Special Alloys

Nimonic, Inconel, Monel, Hastelloy, Bisalloy

Cast Iron

GG10, GG15, GG20, GG25, GG30, GG35, GG40

≤ 240 HB

≤ 300 HB

≤ 330 HB

≤ 1200

GGG40, GGG50, GGG60, GGG70, 32510, 50005, Nodular Iron

≤ 240 HB

≤ 300 HB

Chilled Cast Iron

≤ 350 HB

Ti and Ti-alloys

3.7024 Ti99,5, 3.7114 TiAI5Sn2,5, 3.7124 TiCu2

≤ 850

3.7154 TiAI6Zr5, 3.7164 TiAI6V4, 3.7184 TiAI4Mo4Sn2,5, -TiAI8Mo 1V1

850-1200

AI and Ti-alloys

3.0255 AI99,5, 3.2315 AIMgSi1, 3.3515 AIMg1

≤ 400

AI Wrought Alloys

3.0615 AIMgSiPb, 3.1325 AICiMg1, 3.3245 AIMg3Si, 3.4365 AIZnMgCu1,5

≤ 450

AI Cast Alloys ≤ 10 % Si

3.2131 G-AISi5Cu1, 3.2153 G-AISi7Cu3, 3.2573 G-AISi9

≤ 600

AI Cast Alloys >10 % Si

3.2581 G-AISi12, 3.2583 G-AISi12Cu, -GAISi12CuNiMg

≤ 600

Magnesium Alloys

MgMn2, G-MgAI8Zn1, G-MgAI6Zn3

≤ 450

100

Copper, Low-Alloyed

2.0070 SE-Cu, 2.1020 CuSn6, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb

≤ 450

Brass, Short-Chipping

2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2

≤ 600

Brass, Long-Chipping

2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5

≤ 600

Bronze, Short-Chipping

2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

≤ 600

2.0790 CuNi18Zn19Pb

> 600 -850

2.0916 CuAI5, 2.0960 CuAI9Mn, 2.1050 CuSn10

≤ 850

2.0980 CuAI11Ni, 2.1247 CuBe2

850-1000

Bronze, Long-Chipping Duroplastics

Bakelit, Resopal, Pertinax, Moltopren

Thermoplastics

Plexiglas, Hostalen,Novodur, Makralon

Kevlar

Glass, carbon Concentr. Plastics

GFK/CFK

COUNTERSINKS COUNTERSINKS & COUNTERBORES

Spheroidal Graphite and Malleable Cast Iron

Cutting speed recommendation - COUNTERSINKING & COUNTERBORING

CUTTING SPeed recommendation COUNTERSINKING & COUNTERBORING

169

DRILL SET HSS JOBBER DRILL SET ø1.0 - 10.0 mm drill set in 0.1mm increments (includes stand) STEAM TEMPERED drills (left): Part No. 205 0.000 TIN tip coated drills (RIGHT): Part No. 9651 0.005

METRIC DRILL SET ø1.0 - 13.0 mm (25 pieces) in plastic box Metric 0.5 increments Part No. BG201 0.014

IMPERIAL DRILL SET 1/16 - 1/2 inch (29 pieces) in plastic box Imperial 1/64 increments Part No. BG201 0.021

SPOT DRILL SET ø6, 8, 10 and 12 mm (4 pieces) in plastic box HSS Uncoated spot drill set: Part No. 557 0.001 HSS FIRE COATED spot drill set: Part No. 557 0.002 Carbide uncoated spot drill set: Part No. 723 0.001 Carbide FIRE COATED spot drill set: Part No. 723 0.002

MILLING CUTTER SET GUHRING TOOL SET 170

Carbide milling cutters with FIRE coated ø6, 8, 10 and 12 mm (4 pieces) in plastic tube. 2 Fluted slot drill set: Part No. 3676 0.001 3 Fluted end mill set: Part No. 3560 0.001 4 Fluted end mill set: Part No. 3649 0.001

DRILL TAP SET with gun nose taps HSS-E Taps: M3 - M12 (7 pieces) HSS Drills: Tapping size holes : ø2.5mm - 10.2mm (7 pieces) Blue Ring: Part No. BG5559 0.010 Gold Ring: Part No. 5696 17.100

with Spiral flute taps HSS-E Taps: M3 - M12 (7 pieces) HSS Drills: Tapping size holes : ø2.5mm - 10.2mm (7 pieces) Blue Ring: Part No. BG5553 0.020 GOLD Ring: Part No. 5698 17.100

TAP SET

HSS-E PowerTaps, steam tempered finish ø5, 6, 8, 10 and 12 mm (5 pieces) GUN NOSE TAP SET: Part No. 5695 17.000 SPIRAL FLUTE TAP SET: Part No. 5697 17.000

COUNTERSINK & COUNTERBORE SET

Straight shank HSS ø6.3 - 20.5 mm (6 pieces) in plastic box Bright finish: Part No. 498 7.000 FIRE coating finish: Part No. 498 8.000

COUNTERBORE SET Straight shank HSS, bright finish M3 - M12 (7 pieces) in plastic box Part No. BG482 0.200

GUHRING TOOL SET

90º COUNTERSINK SET

171

TECHNICAL INFORMATION TECHNICAL

Special Point Geometry and manufacturing tolerances

Form A Thinned chisel edge

Form D Point ground for cast iron

Form B Thinned chisel edge with corrected cutting lips

Form E Brad point (center point)

Form C Split point

Definitions, dimentions and angles

Cutting portion point cutting lip length

lead. edge of land flute

flank

Cross section A-A cutting wedge

Special Point Geometry and manufacturing tolerances

Special point geometry to DIN 1412

minor flank land

body

chisel edge

A chisel edge corner

flank

A heel

face

cutting lip

face

land width

eØ

corner

nc ss

ara

cle

th ick b

body clearance

drill Ø

heel options detail X

chisel edge angle

de-burred

body clear.

chamfered

radiused

flute land

core thickness

γf rake angle γfe working front rake angle

gle an

resu ltan tc

utt ing

ed pe

working angle

βf side wedge angle

diameter d

feed f αfe effective side clearance angle αf side clearance angle

cutting direction vc selected edge point (corner)

direction of cutting motion ve (d.π)

cutting travel lc per revolution feed direction vf

TECHNICAL INFORMATION

drill angle

181

Definitions, dimentions and angles Definitions, dimentions and angles

Chamfer forms to DIN 2197 6…8 threads

Form A

long, 6 - 8 threads for short through holes

3.5…5.5 threads

Form B

2…3 threads

Form C

short, 2 - 3 threads for blind holes and generally for aluminium, grey cast iron and brass

3.5…5 threads

Form D

medium, 3.5 - 5.5 threads, with spiral point, for all through holes and deep tapping holes in medium and longchipping materials

medium, 3.5 - 5 threads for short through holes

Form E

1.5…2 threads

extremely short, 1.5-2 threads, for blind holes with little run-out depth.

Form F

1…1.5 threads

extremely short, 1-1.5 threads, for blind holes with little run-out depth. Avoid use if possible.

Types of centres (standard, to DIN 2197/DIN 2175)

solid cone 1

stepped cone 2

4 solid cone

on cutting section

on shank

5 chamfer

internal centre (form A or R to DIN 322 3 acc. to manufact. specification)

internal centre 6 (form A or R to DIN 322 acc. to manufact. specification)

Centre on cutting section

TECHNICAL INFORMATION 182

Thread dia. range mm

with chamfer forms A, C, D, E

with chamfer form B

Centre on shank

≤ 4.2

1 12 123 3

1 1 123 3

456 456 456 6

> 4.2 … 5.6 > 5.6 … 10.0 > 10.0

Coolant duct geometries axial coolant delivery with axial coolant duct exit

axial coolant delivery with radial coolant duct exit in the flutes at the chamfer

types on milling cutters and their basic application range Quick spiral with 30° helical pitch, suitable for finish milling structural, case hardened and heat-treatable steels as well as short-chipping nonferrous metals and materials up to •·1200·N/mm²·tensile strength·applying high speed steel milling cutters •·1600·N/mm²·tensile strength·applying solid carbide milling cutters

30°

Type NH

Quick spiral with high 45° helical pitch, suitable for super fine finishing high-alloyed materials and grey cast iron up to appr. •·1600·N/mm2·tensile strength 45°

Type NF

Chip breakergeometry flattened coarse

30°

Type NR Chip breakergeometry coarse

30°

Type NRf Chip breakergeometry fine

30°

Type H

Flat knuckle-type teeth/quick spiral, produces short chips and improved smoother surface quality in comparison to type NR or NRf. Suitable for milling standard materials up to appr. •·1200·N/mm²·tensile strength·applying high speed steel milling cutters •·1600·N/mm²·tensile strength applying solid carbide milling cutters

Standard knuckle-type teeth, produces short chips and good chip evacuation. Suitable for milling standard materials up to appr. •·1000·N/mm²·tensile strength·applying high speed steel milling cutters •·1200·N/mm²·tensile strength·applying solid carbide milling cutters

Fine knuckle-type teeth, produces short chips and good chip evacuation. Better feed rates possible than with type NR. Suitable for milling materials with a high tensile strength up to appr. •·1400·N/mm²·tensile strength·applying high speed steel milling cutters •·1600·N/mm²·tensile strength applying solid carbide milling cutters

Quick spiral with high 55° helical pitch, suitable for super-fine finishing as well as HSC*machining of all hardened materials and chilled cast iron up to appr. •·62·HRC·hardness

55°

Type HR

20°

Type W

Fine knuckle-type teeth, produces short chips with good chip evacuation. Suitable for milling hardened materials as well as grey and chilled cast iron with up to appr. •·56 HRC hardness * High Speed Cutting

Quick spiral with 45° helical pitch, suitable for finish milling soft materials such as aluminium, Al-alloys and non-ferrous metals up to appr. •·600·N/mm2tensile strength 45°

Type WR Chip breakergeometry extra coarse

Coarse knuckle-type teeth, produces short chips with good chip evacuation. Suitable for milling aluminium. non-ferrous metals as well as soft steels up to appr. •·600·N/mm²·tensile strength.

TECHNICAL INFORMATION

Chip breakergeometry fine

30°

types on milling cutters and their basic application range

Type N

183

CO-ORDINATE HOLE SPACING & CUTTING SPEED

CO-ORDINATE HOLE SPACING

Multiply values shown by diameter of pitch circle.

8-Hole

3-Hole

A = 0.25000 B = 0.43301 C = 0.86603

A = 0.27059 B = 0.27059 C = 0.46194 D = 0.19134

B A

9-Hole

5-Hole B

C D

A = 0.18164 B = 0.55902 C = 0.40451 D = 0.29389

A = 0.46985 B = 0.17101 C = 0.26201 D = 0.21985 E = 0.38302 F = 0.32139 G = 0.17101 H = 0.29620

E A

10-Hole C B

A = 0.29389 B = 0.09549 C = 0.18168 D = 0.25000 E = 0.15451

6-Hole

A = 0.43301 B = 0.25000 C = 0.50000

E D B

11-Hole

COMPARISION OF HARDNESS

TECHNICAL INFORMATION

184

HB30

Tens. strength (N/mm2)

HV10

HB30

hes/ft Y = inc

/1000

B = mm

D) (PCBN) nd (PC Diamo Nitride talline Borom Polycrys talline Cubic Polycrys amics Cer ts Cerme s ting Coa es Carbid Coated

Al 2O 3 Si 3N 4

ree ) per deg Rise (mm r 1000mm ove

ne Ultra-fi es Carbid

Grain

HSS Coated HSS Powder HSS

ESS +

GHN _ TOU

X°

antage tivity Adv

y ductivit Cost/Pro ges Produc Advanta 1 foot tions and ions r than A° ) Applica Applicat ed lowe s longer Y (inch Typical r Pric l X˚ give Principa tics and othe ) carbide; better achine Y (inch 5.343 eris 1000 mm X˚ Screw-m operations, Charact l 24˚ tool life, h. eria ed finis Mat 0 ) spe 0.21 , low5.596 surface times B (mm Cutting lowted cuts hining. 1˚ 25˚ A˚ Tougher than interrup ) Up to 20 l wer mac 0.419 life of 5.853 B (mm 445.23 materia ide horsepo operations on 2˚ the tool A˚ 26˚ 24˚ tional Carb carbide. Finishing ls, stainless HSS 0.629 17.46 6.114 conven 466.31 3˚ 1˚ t 27˚ 25˚ irons, stee aluminium grades. Excellen to at 0.839 34.92 6.381 ls and ce 487.73 finishes g 4˚ 2˚ resistan ck and stee 28˚ 26˚ Better alloys. et 1.050 52.41 6.652 wear, sho rfacing, higher machinin 509.53 TiN Cerm 5˚ 3˚ roll resu on 29˚ 27˚ TiC/ t. milll hea ns s. Stee rate 1.261 69.93 6.928 operatio 531.71 y times 6˚ 4˚ 30˚ finishing s & steels. 28˚ ides manof s D 3 Prov nes .49 iron .31 1.47 .210 87 7 Pentago 554 cast e life High hard 7˚ 5˚ n 31˚ 29˚ the edg Eliminates s 1.686 C = D 7.498 105.10 d 577.35 s Ceramic carbide. costly 8˚ 6˚ ness 32˚D = x 0.0955 30˚ hing d for S x 1.701 High hard 1.90c1 g and finis s. nee rnative grinding 7.793 122.78 600.86 d = S x 1.376 3 = d x 1.2361 Roughin on cast iron 9˚ 7˚ alte 33˚ 31˚ plus high ns ns. 2.116 S = D x 8.0944= D x 0.809 operatio 140.54 operatio 624.87 S fracture 30 0.5878 8˚ 10˚ ss and 34˚ 32˚ AF Better than of Area toughne A = s8.40 2 3 tool life S = 1.41 2.333 Nitride 158.38 x 1.720 shock 649.41 4214 x AF ls times theH high Silicon 5 9˚ 11˚ thermal 35˚ 33˚ k materia even on . H ce. 1 wor ide, 8 .33 d D .51 = 1.154701 2.55 carb 176 8.71 resistan 674 ll Hex Hardene aluminium agon x AF 12˚ 10˚ 36˚ 34˚ AF(mm) in 45-70 Rockwe silicon METRIC 3 2.770 C = S(mm) e 194.38 onal 700.21 d D x 0.0679.04 Excepti 13˚ 11˚ 37˚ 35˚ C rang H(mm) hing AF(mm) s. 1 n 1.414 s the tool 2 1.154 2.992 D = s x 2 = d 9.375 ic Boro hardnes 2 S 212.56 (mm)y time 726s.54 to finis g Cub x 7 Man 1.154 inium INCH ghin 14˚ 12˚ H(mm) d = S 38˚ 36˚ 2.82 ide. 7 Rou 84 2.30 x 1.7321 c on alum41 sive57.982 AF(inch) Nitride life of =9.71 8 carb 3.215 s = rations 94 or abra 230.87 3 D x70.866 753.55 47.3427 S(inch) 42 D x39˚ s of 4.24ope soft 15˚ 0.5 13˚ 26 r nes H(inch) 37˚ 59.3 1/32 3.46 970 48.4 Hard 4 … ” 0.04 and othe 41or non 3.441Area A = s 2 x 5.6569 43 42 0.03 249.33 974 10.069 781.29 ous 60.8112 diamond 1/16” 61 4.61 16˚ 14˚ talline 40˚ 2.5981 38˚ 88 erials. 5 ide 7.071 non-ferr crys 0.08 49.6 mat carb 44 9 84 0.07 Poly 521 ed plus 3.66 1 allic 267.95 Tipp 10.431 hing 62.2254 3/32” 809.78 22 D 35 finis 6 ss. 8.48 met5.77 Octagon41˚ 17˚ 0.1326 15˚ 50.8068 Diamond 39˚ 45 sive63.6 toughne ghing & abra 53 Rou6.92 0.1083 Inserts 1/8” 0.176 s 839.10 396 51.96 3.899 286.75 10.805 Carbide ns on 46 7 c = D x 0.038 9.8995 operatio82 8 0.1443 15 18˚ 16˚ 42˚ 40˚ 65.0538 s of 5/32” 0. c 8.08 ous or d .29 29 -ferr Hard8nes 11.31 D =2s x 2.613 53.1162 4.13 2210 0.18 305.73 11 .190 47 non 869 and ls. 23 37 66.4 3/16” 19˚ 1 = d x 1.082 17˚ 04 9.2376teria 681 54.2 41˚ diam d = s8 x 2.41443˚ 9 ond12.7 0.2652 non-ma Solid 48 4 709 4.36 talline 0.2165 xable. 279 10.3 324.92 11.588 2 = D x 0.923 67.8823 900.40 7/32” s = D x 0.38244˚ 923 49 10 14.1 Polycrys Inserts inde 20˚ 18˚ 0.30 55.4 42˚ 9 94 0.25 256 7 421 11.54 69.2965 1/4” 0.35 26 4.60A6 Diamond 344.33 Area 12.000 932.52 11 15.5 70 56.5803 = s 2 x 4.828 50 36 0.28 21˚ 19˚ 45˚ 4 43˚ 564 12.7 70.7107 9/32” 87 017 51 12 16.9 4.848 0.3977 57.7351 363.97 965.69 706 13.8 0.3248 72.1249 22˚ Dec 20˚ 5/16” 44˚ D 564 52 13 18.3 0.4419 ago4n (10 58.8898 5.09 383.86 848 1501 0.3608 1000.00 73.5391 sides) 11/32” 23˚ c = D 21˚ 14 19.7 11 45˚ 0.4861 60.0445 53 x 0.024 990 16.1 0.3969 74.9533 3/8” 0.53 404.03 658 54 D = s x 3.236 5 15 61.1992 22˚ 21.2132 03 0.43 d s c 76.3676 13/32” 30 17.3205 d = s x 3.077 0 = d x 1.0515 16 22.6 424.47 0.5745 62.3539 55 6 274 = 0.46 23˚ D 77 7/16” x 0.9511 s = D x 0.309 .7818 91 18.4752 17 24 0.6187 63.5086 56 .041 0.5052 Area A = 2 0 79.1960 15/32” 18 25.4 6 19.6299 57 s x 7.6942 0.6629 64.6633

Dodecag on (12 side

Ellipse

C=Dx 0.017 D = s x 3.863 0 d = s x 3.732 7 = d x 1.0353 s = D x 0.2580 = D x 0.9659 Area A = 2 8 s x 11.19 61

Example : To calcu late C when d = 100 mm, d : D = 100 D = 200 mm ratio ` C = D x + 200 = 0.5 ` C = D x ratio 2.4221 = 200 x 2.4221 = 484.42 mm

Area A = r 4 # D # d = 0.78

5#D#d

Circumfer ence C can depends on the ratio be calculated and d : D (Refe r table) D:D C = D time s D:D 0.2 C = D time 2.1010 s 0.6 2.552 0.3 7 2.1930 0.7 2.691 0.4 2 2.3013 0.8 2.936 0.5 1 2.4221 0.9 2.986 6

559 20.7 0.5413 80.6102 1/2” 0.70 846 58 19 26.8 65.8180 71 0.57 701 21.93 82.0244 17/32” 74 20 28.2 93 59 0.7513 66.9727 843 23.0 0.6134 83.4386 9/16” 940 60 21 29.6 0.7955 68.1274 985 24.2 0.6495 84.8528 19/32” 487 61 22 0.8397 69.2821 31.1127 0.6856 86.2671 5/8” 0.88 25.4034 23 32.5 70.4368 62 39 0.72 269 26.5 87.6813 21/32” 17 581 63 24 33.9 0.9281 71.5915 411 27.712 0.75 89.0 11/16 78 955 72.74 ” 0.9723 25 35.3 8 64 62 23/3 554 28.8 0.7939 90.5097 2” 1.016 675 65 26 36.7 73.9009 696 30.0 91.9239 3/4” 1.060 5 0.8299 222 66 27 38.1 75.0556 7 0.8660 838 31.17 93.3381 25/32” 28 39.5 69 1.1049 76.2103 67 980 32.3 0.9021 94.7523 13/16” 316 68 29 41 1.1490 77.3650 .0122 33.4 0.9382 96.1666 27/32” 863 69 30 42.4 1.1932 78.5197 264 34.6 0.9743 97.5808 7/8” 410 70 31 43.8 1.237 79.6 744 29/3 4 1.010 406 35.7 98.9950 4 2” 1.281 957 71 32 45.2 80.8291 6 1.046 548 36.9 100.4092 15/16” 4 504 72 33 46.6 1.3258 81.9838 691 38.1 1.0825 101.8234 31/32” 051 73 34 48.0 1.3700 83.1385 833 39.2 1.1186 103.2376 1” 598 74 35 49.4 1.4142 84.2932 975 40.4 1.1547 104.6518 1 1/8” 145 75 36 50.9 1.5910 85.4479 117 41.56 1.2990 106.0661 1 1/4” 37 52.3 92 76 1.7678 86.6026 259 42.7 1.443 107 1 3/8” .4803 87 4 239 77 38 1.9445 .7573 53.7401 1.5877 108.8945 1 1/2” 43.8786 39 55.1 2.1213 88.9120 78 110.3 543 45.0 1.7321 1 5/8” 087 90.0 333 79 40 56.5 2.2981 667 1 686 46.1 1.8764 111.7229 3/4” 2.474 880 80 91.2214 9 2.0207 113.1371 1 7/8” 2.6517 92.3761 2.1651 2” 2.8284 2.3094

22 23 24 25 26 27

HV10

920 28 273 71 75 940 29 278 76 80 OF LS SITION30 970RELATIVE POTO 287 81 85 TERIA OL MA TTING CU US VARIO 995 31 295 86 90NCE RE FE RE 1020 32 301 90 EE – A QUICK 95 R DEGR RISE PE 1050 33 311 95 100 1080 34 319 100 105 1110 35 328 105 110 1140 36 337 109 115 1170 37 346 114 120 1200 38 354 119 125 USEFU DIMENSIO L FORMULAE FOR FIN NS & AR DIN EA G OF PLA1230 39 363 124 130 NE FIGUR ES DISTAN CE ACRO SS CORN 1260 40 SQUARES &372 128 135 HEXAGO ERS OF NS 1300 41 383 133 140 1330 42 393 138 145 1360 43 402 143 150 1400 44 413 147 155 1440 45 424 152 160 1480 46 435 157 165 1530 47 449 162 170 1570 48 460 166 175 1620 49 472 171 180 1680 50 488 176 185 1730 51 501 181 190 1790 52 517 185 195 1845 53 532 190 200 1910 54 549 195 205 1980 55 567 199 210 2050 56 584 204 215 2140 57 607 209 220 2180 58 622 214 225 59 219 230 60 223 235 61 228 240 62 233 245 63 238 250 64 242 255 65 247 260 66 255 268 67 258 272 68 266 280 degree hes) per 1 foot Rise (inc over

C HRC

HARDNE

240 255 270 285 305 320 335 350 370 385 400 415 430 450 465 480 495 510 530 545 560 575 595 610 625 640 660 675 690 705 720 740 755 770 785 800 820 835 860 870 900

HRC

Tens. strength (N/mm2)

7-Hole

287 293 302 310 317 327 336 345 355 364 373 382 392 403 413 423 434 446 458 473 484 497 514 527 544 560 578 596 615 639 655 675 698 720 745 773 800 829 864 900 940

ENGINEER’S GUIDE BOOK Don’t miss out our free engineer’s guide book on April 2014!

A = 0.27052 B = 0.33922 C = 0.45049 D = 0.21694 E = 0.31175 F = 0.39092

A = 0.47975 B = 0.14087 C = 0.23700 D = 0.15231 E = 0.11704 F = 0.25627 G = 0.42063 H = 0.27032 K = 0.18449 L = 0.21291

D B

12-Hole

8-Hole

A = 0.35355 B = 0.14645

A = 0.22415 B = 0.12941 C = 0.48296 D = 0.12941 E = 0.25882

E C

A B

B D A B

CUTTING SPEED

Symbol

Description

metric

Formula

Cutting Speed

m/min

Vc = π × d × n 1000

Diameter

Revolution per min.

Feed per revolution

Feed per min.

Feed per tooth

fz =

Feed per revolution

f = fz × z

No. of teeth

Chip volume

cm3/min

Depth of cut

Width of cut

Milling time

min

Milling length

Vc × 318 d S=

vf n

vf = n × z × fz

Vf n ×z

ap × ae × vf 1000

t =

If Vf

Tool Materials

Only high quality tool materials are used to produce HSS tools. Systematic selection of alloying elements ensure the tool possesses the optimal characteristics for the individual tasks. Tungsten, Molybdenum: Increase tempering and wearing resistance. Vanadium: Increases wear-resistance of finishing tools. Cobalt: Enables increased hardening temperatures and improves heat-resistance. Guhring description

German steel description

Material No. (steel code)

HSS

HS 6-5-2 (DMo5)

1.3343

standard tool material for most common applications

HSCO HSS-E

HS 6-5-2-5 (EMo5Co5)

1.3243

high heat-resistance, especially suited for roughing or when coolant insufficient

HSS-E

HS 6-5-3 (EMo5V3)

1.3344

high friction resistance and cutting edge stability, especially important for reaming operations

M42

HS 2-9-1-8

1.3247

increased heat resistance and hardness, suitable for difficult-to-machine materials

10-2-5-8, PM52 HS 6-5-3-8, PM30

1.3253 1.3294

high hardness, heat-resistance and cutting edge stability, very dense structure

HSS-E HSS-E-PM

Tool Materials

High Speed Steels

Range of application

Individual Guhring carbide grades The following table lists the most important carbides that are available from Guhring ex=stock for general applications. In more than 80% of applications known to Guhring, the results of DK460UF carbide grade tools together with a specially adapted coating could not be surpassed by any other carbide grades, including coated tools. This and the availability of the material ex-stock simplify tool selection immensely. For further information regrading the application of other carbide grades please contact to our technical engineers. Tungsten Guhring Co-content Hardness carbide grain Description [M-%] [HV] size [µm]

ISO classification [ISO 513]

Characteristics

DK460UF

0.5

1620

DK500UF

0.5

1680

K25 coated: P, M, H, S, N25

The grade has been especially developed for hard machining. It possesses a higher hardness and deformation tolerance in comparison to DK460UF. Due to the high Co-content, a coated application is strongly recommended.

DK255F

0.7

1720

K20 coated: P, M, H, S, N20

The grade is recommended for hard machining, the machining of high tensile grey cast iron and hard AlSi-alloys. Dry machining is possible. A coated application is preferable.

DK120

1.3

1620

DK120UF

0.5

1850

K05

Ultra fine grain type offering extreme wear resistance, suitable for absolutely rigid machines, preferred for reamers.

K555F

0.2 - 0.5

1920

K10-K30

For application with high wear resistant materials, stainless steels, composite materials such as Kevlar and GRP, high speed machining and dry machining.

TECHNICAL INFORMATION

K20-K40 coated: A carbide grade with wide range of application P, M20-M40, H, possibilities. It is applied, mostly coated, for the S, N25 machining of steel, soft Al alloys, cast iron as well as “super alloys” such as Inconel 718. This grade is the backbone of our carbide production.

DK400N

0.7

1580

K35M coated: P, M, S, N35M

An extremely tough grade for the machining of high heat resistant metals.

185

K15 coated: N15 The grade is especially suitable for the application with diamond coating.

MANAGE STOCK KEEP AN OVERVIEW

TM 726

Guhring Tool Dispensing System Everything in the best of order Our Guhring Tool Management Software GTMS organises your tool management, our tool dispensing system brings order to your tool storage and are controlled by the GTMS storage module. Three tool dispensing systems â&#x20AC;&#x201C; TM 326, TM 526 and TM 726 â&#x20AC;&#x201C; satisfy your demands through modern, secure and intelligent tool storage and dispensing systems. Every individual tool dispensing system is of modular design. This allows you to choose from countless combinations of drawers, spiral units, pull-outs and compartments, where everything from indexable inserts, drilling, milling and threading tools as well as measuring and inspection equipment, assembly tools, materials and even gun drills have their place.

186

Logistics

TM 326

TM 526

Please request our “Tool Dispensing System” brochure.

187

PCD/CBN Tools Energy efficient and Âľ-accurate solutions for demanding tasks Our PCD/CBN tool range includes standard tools as well as complex special designs such as PCD-tipped fine reaming tools or combination tools enabling different machining operations with just tool. - Intelligent solutions for the reduction in tool variety as well as primary and secondary times - Highly accurate tools for Âľ-accurate precision machining - Extremely efficient tools for maximum cutting data and considerably reduced machining times - Wear-resistant tools for maximum tool life

188

Guhring Products

// Manufacturing program

Page 03

GUHRING CARBIDE

GUHRING GUhring HARD MATERIALS HARD MATERIALS

CARBIDE KNOW-HOW OF THE HIGHEST LEVEL

Withan anannual annual production production of of in in excess tons Guhring Guhring Hard manufacturers. With excess of of 1500 1500 tons Hard Material Materialdivision divisionisisone oneofofthe theleading leadingcarbide carbide manufacturers. Grade variety, manufacturing possibilities and capacities as well as quality set market standards – the same as expert advice andand Grade variety, manufacturing possibilities and capacities as well as quality set market standards – the same as expert advice thedevelopment developmentsupport supportfor for our our customers. customers. Contact Contact us us and and involve involve us you anan efficient and the us with with your yourtask. task.We Weare aresure surewe wecan canoffer offer you efficient cost-effective solution. and cost-effective solution. CARBIDE BLANKS CARBIDE BLANKS forpunches, punches, core core pullers, pullers, drawing • •for drawingdies diesand andmuch muchmore morefor forthe theforming formingtechnology technology • for cutting, punching, drilling, milling, shredding etc. for the machining • for cutting, punching, drilling, milling, shredding etc. for the machiningtechnology technology forgrooved grooved bushes, bushes, nozzles, nozzles, pressure pressure and • •for and skid skid plates plates for forthe thewear wearprotection protectiontechnology technology • for impact knives, stirring staffs or strainers for the food and pharmaceutical industry • for impact knives, stirring staffs or strainers for the food and pharmaceutical industry forthe the manufacture manufacture of • •for of rotary rotary tools tools

189

COMPARISON OF Tool holder CHARACTERISTICS

TSG 3000 / shrink fit chucks / shrink fit extensions

Hydraulic chucks / HMC 3000 / reduction bushes

maximum concentricity; very slender non-interference; good rigidity; high clamping force; modular lenghtening; patented dampening screw ensures concentricity

high dampening with maximum concentricity; simple handling; flexible application thanks to reduction bushes also with GÜHROJET

drilling, countersinking, milling, reaming, universal and HSC applicatio

reaming, drilling, countersinking, HSC application, light milling

Main feature

accurate and universal; slender; high clamping force

simple handling

Concentricity

< 3μm

with 5xD

< 5μm

Clamping force

very high

Rigidity

very high

high

Dampening

low

very high

Interference

contour small / minimal

medium

Handling

good

very good / very flexible

Actuation

shrink fit device

hexagon key

Clamping chucks / tool holders for straight tool shanks

Characteristics

Main application

190

HPC precision power chucks / clamping sleeves

Straight shank holders “Weldon” / “Whistle-Notch”

Collet chucks ER

maximum clamping force and rigidity thanks to mechancal clamping transmission; high accuracy and balancing quality; flexible application thanks to clamping sleeves also with GÜHROJET

robust, cost-efficient clamping chuck for heavy machining in the lower speed and accuracy range

very flexible clamping chuck for various shank dimensions and tolerances; for lower level machining tasks

heavy HPC and fast accurate HSC milling, drilling, universal application

roughing, milling, drilling

light machining, centering, chamfering, drilling, threading; intermediate shank dimensions

highest clamping force and rigidity

simple operation; secure clamping

highly flexible

< 3μm

< 10μm

< 8μm

< 25μm

< 20μm

extremely high

very safe

medium

extremely high

very high

low

high

low

high

medium

large

large (mini = small)

very good / flexible

good

hexagon key / torque wrench

hexagon key

hook spanner

191

Work easily, quickly and efficiently with each application! Length setting Fume extraction Vapours produced during the shrink fit process are removed and filtered under controlled conditions by the fume extraction system.

During the shrink fit process the tool is pre-set to the required length with the assistance of an adjustment rod.

Quick cooling The water-cooled cooling elements cool down the shrink fit chuck quickly and safely. The shrink fit chuck remains clean and dry, so that it can be applied again without drying and without rusting. Hot spots remain safely screened during the cooling process in order to prevent burns.

Tool identification Balluff chip

User-friendly software

The read and write function of the Balluff chip simplifies tool identification. Tool life can be managed.

Intuitive menu navigation similar to the wellestablished Guhring TM-Software GTMS via touch-screen monitor (for details see page 5).

Label printer Safe shrink fitting The minimal heating of the shrink fit chuck ensures maximum operating safety on the one hand, on the other the controlled heating ensures the long life of the shrink fit chuck.

192

Print data such as Guhring no., current setting dimension, date, operator etc. on an adhesive label for your pre-set tool.