HTB-2 Light duty metal anchors Economical metal anchor for drywall and hollow wall Anchor version
Benefits - Ingenious and strong for hollow base materials - Convincing simplicity when setting
HTB-2 (M5-M6)
- Technical superiority with up to 76 mm fixing thickness - Load carried by strong metal channel and screw
Base material
Drywall
Hollow concrete block
Basic loading data All data in this section applies to: Correct setting (See setting instruction) No edge distance and spacing influence Base material as specified in the table Minimum base material thickness Design resistance Anchor size Gypsum board Thickness 12,5 mm Gypsum board Thickness 2x12,5 mm Fibre reinforced gypsum board Thickness 12,5 mm Hollow concrete block Recommended loadsa) Anchor size Gypsum board Thickness 12,5 mm Gypsum board Thickness 2x12,5 mm Fibre reinforced gypsum board Thickness 12,5 mm Hollow concrete block a)
1
M5 NRd VRd NRd VRd NRd VRd NRd VRd
[kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
NRec VRec NRec VRec NRec VRec NRec VRec
[kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
M6 0,35 0,42 0,70 0,42 0,80 0,84 1,04 1,3
M5
M6 0,25 0,30 0,50 0,30 0,57 0,60 0,74 0,92
With overall global safety factor = 3 to the characteristic loads and a partial safety factor of = 1,4, to the design values.
Updated: Dec-17
Materials Material quality Part
Material
Metal channel Cap washer Legs Screw
Carbon steel galvanized to 5 microns Polypropylene copolymer Polypropylene copolymer Carbon steel galvanized to 3 microns
Setting information Setting details Anchor size Nominal diameter of drill bit Thickness of wall and fixture
M5 min max
Minimum space of cavity Screw length Screw size Torque moment
Installation equipment Anchor size Rotary hammer Setting tools
d0 h + tfix h + tfix l l d Tinst
[mm] [mm] [mm] [mm]
M6 13 10 76 60 12 + h + tfix
[Nm] [mm]
M5 3
M6 5
M5 M6 TE 6A, TE 6C, TE 6S, TE 15, TE 15-C, TE 18-M Screw driver
Setting instruction *For detailed information on installation see instruction for use given with the package of the product. Setting instruction 1. Drilling 2.Prepare anchor for inserting 3.Inserting and adjusting anchor
4.Throw away removeable part
Updated: Dec-17
5. Inserting screw with tool
2