HCA Light duty metal anchors Economical coil anchor Anchor version
Benefits - Re-usable up to 140 times - High load capacity HCA 5/8”
- Big washer 34 mm - For temporary external applications
Base material
Other information
DIBt Approval Reusability
Concrete Tensile zone (non-cracked)
Approvals / certificates Description DIBt approval (reusability)
Authority / Laboratory DIBt, Berlin
No. / date of issue Z-21.8-2027 / 2014-05-14
Basic loading data For temporary application: All data in this section applies to: Correct setting (See setting instruction) No edge distance and spacing influence Base material as specified in the table For temporary application in standard and fresh concrete < 28 days old: All data in this section applies to: Strength class, fck,cube ≥ 10 N/mm2 Only temporary use Screw is reusable, before each usage it must be checked according Hilti instruction for use with the suited tube Hilti HRG Design resistance are valid for single anchor only Design resistance are valid for all load direction and valid for both cracked and non-cracked concrete Minimum base material thickness No edge distance and spacing influence Design resistance for all directions in cracked and non-cracked concrete Anchor HCA 5/8” x 90 Length in concrete hnom ≥ [mm] 80 2 1) For concrete strength ≥ 10 N/mm FRd [kN] 4 For concrete strength ≥ 15 N/mm2 FRd1) [kN] 5 2 1) For concrete strength ≥ 20 N/mm FRd [kN] 6
1
HCA 5/8” x 130 115 12 15 18
Updated: Dec-17
Materials Material quality Part Anchor HCA 5/8” Coil HCT
Material Steel galvanized; fuk ≥ 850 N/mm2 Steel galvanized; 350 N/mm 2 ≤ fuk ≤ 800 N/mm2
Anchor dimensions Anchor Length in concrete Anchor length Length of thread Outer diameter Core diameter Marking for correct installation Cross section
hnom ≥ s dt dk hs As
[mm] [mm] [mm] [mm] [mm] [mm] [mm2]
Coil dimensions Anchor Anchor length Length of thread
h
[mm] [mm]
HCT 29,3 15,6
Tube specification Tube Inner tube diameter Outer tube diameter Tube length
Øi Øe Lt
[mm] [mm] [mm]
HRG 16 15,1 20,0 30,0
Updated: Dec-17
HCA 5/8” x 90 80 90
HCA 5/8” x 130 115 125 51 15,8 13,1 20 196,1
2
Setting information Setting details HCA Anchor Length in concrete Nominal diameter of drill bit Cutting diameter of drill bit Diameter of clearance hole in the fixture Wrench size (H-type) Thickness of fixture Depth of drill hole Torque moment
hnom ≥ d0 dcut ≤ df SW tfix h1 ≥ Tmin
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Nm]
Installation equipment Anchor Rotary hammer Other tools
HCA 5/8” x 90 80
HCA 5/8” x 130 115 16 16,5 18 24 0 ... 10
95 - tfix
95 - tfix 180
HCA TE 2 – TE 80 Hammer, torque wrench, blow out pump
Setting parameters HCA Anchor Length in concrete Min. thickness of concrete member Min. spacing Min. edge distance (load direction 1) Min. edge distance (load direction 2)
3
hnom ≥ hmin smin c1,min c2,min
[mm] [mm] [mm] [mm] [mm]
HCA 5/8” x 90 80 200 125 150 200
HCA 5/8” x 130 115 200 550 350 500
Updated: Dec-17
Setting instruction *For detailed information on installation see instruction for use given with the package of the product. Setting instructions 1. Drill the hole
3. Position coil
2. Cleaning
4. Inserting the anchor
5. Attaching the belonging washer
Updated: Dec-17
4