Tæknilegar Upplýsingar fyrir HSL-3 Múrbolta by Hagi ehf

HSL-3 EXPANSION ANCHOR Technical Datasheet Update: Oct-20

HSL-3 expansion anchor Ultimate-performance heavy-duty expansion anchor Anchor versions

Benefits - Suitable for cracked concrete C20/25 to C50/60

HSL-3 Bolt version (M8-M24) HSL-3-G Threaded rod version (M8-M24) HSL-3-B Safety cap version (M12-M24)

- Automatic torque control with HSL-3-B

HSL-3-SK Countersunk version (M8-M12)

Concrete (non-cracked)

Concrete (cracked)

Static/ quasi-static

- Easily removable for temporary fastening or retrofit

Diamond cored holes

Seismic ETA-C1, C2

Fatigue

Shock

PROFIS Anchor design Software

Corrosion resistance

Fire resistance

Other information

Variable embedment depth

Approvals/certificates Description European technical Assessment a) Fire test report ICC-ES report incl. seismic b) Shock approval Fire performance ACI 349-01 nuclear suitability a) b)

- Length can be customized to a specific project need

Load conditions

Installation conditions

Hammer drilled holes

- Can be installed with hammer or diamond drilling for same performance - Top shear performance due to high strength expansion and shear sleeves

HSL-3-SH Hexagonal socked head version (M8-M12)

Base material

- Suitable for all dynamic loads: seismic C1 and C2, shock and fatigue

European Technical Assessment

CE conformity

Authority / Laboratory CSTB, Marne-la-Vallèe CSTB, Marne-la-Vallèe ICC evaluation service Civil Protection of Switzerland Exova Warringtonfire Wollmershauser consulting

No. / Date of issue ETA-02/0042 / 2017-11-22 ETA-02/0042 / 2017-11-22 ESR 1545 / 2018-03 BZS D 08-601 WF 327804/A / 2013-07-10 WC 11-02 / 2011-09

All data given in this section according to ETA-02/0042, issue 2017-07-20. For more details on Technical Data according to ICC please consult the relevant HNA FTM.

Updated: Oct-20

Static and quasi-static resistance (for a single anchor) All data in this section applies to: - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Minimum base material thickness - Concrete C 20/25, fck,cube=25 N/mm2 Effective anchorage depth a) Anchor size Eff. Anchorage depth

hef

[mm]

hef,1b) 60

hef

[mm]

hef,1 100

Anchor size Eff. Anchorage depth a) b)

hef,3 100

hef,1b) 70

hef,3 150

hef,1 125

M10 hef,2 90 M20 hef,2 155

hef,3 110

hef,1b) 80

hef,3 185

hef,1 150

M12 hef,2 105 M24 hef,2 180

hef,3 130 hef,3 210

HSL-3-SH and HSL-3-SK only available in sizes M8-M12 HSL-3-SH and HSL-3-SK can only be set in position 1.

Characteristic resistance Anchor size Non-cracked concrete HSL-3 / HSL-3-B Tension HSL-3-G NRk HSL-3-SH / HSL-3-SKa) HSL-3 / HSL-3-B Shear HSL-3-G VRk HSL-3-SH / HSL-3-SKa) Cracked concrete HSL-3 / HSL-3-B Tension HSL-3-G NRk HSL-3-SH / HSL-3-SKa) HSL-3 / HSL-3-B Shear HSL-3-G VRk HSL-3-SH / HSL-3-SKa) Anchor size Non-cracked concrete Tension HSL-3 / HSL-3-B NRk HSL-3-G Shear HSL-3 / HSL-3-B VRk HSL-3-G

Anchor size Cracked concrete Tension HSL-3 / HSL-3-B NRk HSL-3-G Shear HSL-3 / HSL-3-B VRk HSL-3-G a)

M8 hef,2 80 M16 hef,2 125

M10

M12

[kN]

23,5

29,3

29,6

43,1

46,6

36,1

54,3

67,4

[kN]

31,1 26,1 31,1

31,1 26,1 -

59,2 41,8 59,2

60,5 41,8 -

72,3 59,3 72,3

89,6 59,3 -

[kN]

12,0

16,0

25,8

24,0

[kN]

30,1 26,1 30,1

31,1 26,1 -

42,2 41,8 42,2

60,5 41,8 -

51,5 51,5 51,5

77,5 59,3 -

89,6 59,3 -

M16

65,0

M20

65,0

[kN]

50,5

[kN]

101,0 141,2 158,5 141,2 186,0 186,0 185,5 204,5 204,5 101,0 120,6 120,6 141,2 155,3 155,3 185,5 204,5 204,5

M16

70,6

95,0

M24

95,0

M20

36,0

92,8

100,0 100,0

M24

[kN]

36,0

50,3

50,0

66,1

65,0

[kN]

72,0 72,0

100,6 132,3 100,6 138,9 181,2 132,3 173,9 204,5 100,6 120,6 100,6 138,9 155,3 132,3 173,9 204,5

HSL-3-SH, HSL-3-SK can only be set in position 1.

Effective anchorage depth a) Anchor size Eff. Anchorage depth

hef

[mm]

hef

[mm]

hef,1 60

Anchor size Eff. Anchorage depth Updated: Oct-20

hef,1 100

M8 hef,2 80 M16 hef,2 125

hef,3 100 hef,3 150

hef,1 70

hef,1 125

M10 hef,2 90 M20 hef,2 155

hef,3 110 hef,3 185

hef,1 80

hef,1 150

M12 hef,2 105 M24 hef,2 180

hef,3 130 hef,3 210 2

a) b)

HSL-3-SH and HSL-3-SK only available in sizes M8-M12 HSL-3-SH and HSL-3-SK can only be set in position 1.

Design resistance Anchor size Non-cracked concrete HSL-3 / HSL-3-B Tension HSL-3-G NRd HSL-3-SH / HSL-3-SKa) HSL-3 / HSL-3-B Shear HSL-3-G VRd HSL-3-SH / HSL-3-SKa) Cracked concrete HSL-3 / HSL-3-B Tension HSL-3-G NRd HSL-3-SH / HSL-3-SKa) HSL-3 / HSL-3-B Shear HSL-3-G VRd HSL-3-SH / HSL-3-SKa)

Anchor size Non-cracked concrete Tension HSL-3 / HSL-3-B NRd HSL-3-G HSL-3 / HSL-3-B Shear VRd HSL-3-G Cracked concrete Tension HSL-3 / HSL-3-B NRd HSL-3-G HSL-3 / HSL-3-B Shear VRd HSL-3-G a)

13,0

19,5

19,7

28,7

31,1

24,1

36,2

44,9

[kN]

24,9 20,9 24,9

24,9 20,9 -

39,4 33,4 39,4

48,4 33,4 -

48,2 47,4 48,2

71,7 47,4 -

[kN]

6,7

10,7

17,2

16,0

[kN]

20,1 20,1 20,1

24,9 20,9 -

28,1 28,1 28,1

41,0 33,4 -

48,4 33,4 -

34,3 34,3 34,3

51,6 47,4 -

71,1 47,4 -

M16

M20

M24

[kN]

33,7

43,3

47,1

63,3

61,8

66,7

[kN]

67,3 67,3

94,1 94,1

123,7 96,5

94,1 94,1

129,9 148,8 123,7 162,6 163,6 124,2 124,2 123,7 162,6 163,6

[kN]

24,0

33,5

33,3

44,1

43,3

[kN]

48,0 48,0

67,1 67,1

88,2 88,2

67,1 67,1

92,6 92,6

120,8 120,8

88,2 88,2

115,9 146,1 115,9 146,1

hef,3 110

hef,1b) 80

hef,3 185

hef,1 150

43,3

HSL-3-SH and HSL-3-SK only available in sizes M8-M12

Eff. Anchorage depth

hef

[mm]

hef,1b) 60

hef

[mm]

hef,1 100

Anchor size Eff. Anchorage depth

M8 hef,2 80 M16 hef,2 125

hef,3 100

hef,1b) 70

hef,3 150

hef,1 125

M10 hef,2 90 M20 hef,2 155

M12 hef,2 105 M24 hef,2 180

hef,3 130 hef,3 210

HSL-3-SH and HSL-3-SK only available in sizes M8-M12 HSL-3-SH and HSL-3-SK can only be set in position 1.

Recommended loads b) Anchor size Non-cracked concrete HSL-3 / HSL-3-B Tension HSL-3-G NRec HSL-3-SH / HSL-3-SKa) HSL-3 / HSL-3-B Shear HSL-3-G VRec HSL-3-SH / HSL-3-SKa) Cracked concrete Tension NRec 3

M12

[kN]

Effective anchorage depth a) Anchor size

a) b)

M10

HSL-3 / HSL-3-B HSL-3-G

M10

M12

[kN]

9,3

14,0

14,1

20,5

22,2

17,2

25,9

32,1

[kN]

17,8 14,9 17,8

17,8 14,9 -

28,2 23,9 28,2

34,6 23,9 -

34,4 33,9 34,4

51,2 33,9 -

[kN]

4,8

7,6

12,3

11,4

Updated: Oct-20

HSL-3-SH / HSL-3-SKa)

Shear VRec

HSL-3 / HSL-3-B HSL-3-G HSL-3-SH / HSL-3-SKa)

Anchor size Non-cracked concrete Tension HSL-3 / HSL-3-B NRec HSL-3-G HSL-3 / HSL-3-B Shear VRec HSL-3-G Cracked concrete Tension HSL-3 / HSL-3-B NRec HSL-3-G HSL-3 / HSL-3-B Shear VRec HSL-3-G a) b)

[kN]

14,3 14,3 14,3

17,8 14,9 -

20,1 20,1 20,1

M16

29,3 23,9 -

34,6 23,9 -

24,5 24,5 24,5

M20

36,9 33,9 -

50,8 33,9 -

M24

[kN]

24,0

31,0

33,6

45,2

44,2

47,6

[kN]

48,1 48,1

67,2 67,2

88,4 68,9

67,2 67,2

92,8 88,7

106,3 88,7

88,4 88,4

116,1 116,1

116,9 116,9

[kN]

17,1

24,0

23,8

31,5

31,0

[kN]

34,3 34,3

47,9 47,9

63,0 63,0

47,9 47,9

66,2 66,2

86,3 86,3

63,0 63,0

82,8 82,8

104,3 104,3

HSL-3-SH and HSL-3-SK only available in sizes M8-M12. With overall partial safety factor for action  = 1,4. The partial safety factors for action depend on thy type of loading and shall be taken from national regulations.

Seismic resistance (for a single anchor) All data in this section applies to: - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Minimum base material thickness - Concrete C 20/25, fck,cube=25 N/mm2 - αgap = 0,5 Effective anchorage depth for seismic C2 a) Anchor size M10 hef,1 hef,2 hef,3 Eff. Anchorage depth hef [mm] 70 90 110 a)

hef,1 80

M12 hef,2 hef,3 105 130

hef,1 100

M16 hef,2 hef,3 125 150

M20 hef,1 125

hef,2 155

hef,3 185

HSL-3-SH and HSL-3-SK can only be set in position 1 and only available in sizes M8-M12.

Characteristic resistance in case of seismic category C2 Anchor size M10 HSL-3 / HSL-3-B 12,2 12,2 12,2 21,9 Tension HSL-3-G [kN] NRk,seis HSL-3-SH / HSL-3-SK 12,2 21,9 9,4 9,4 9,4 13,2 HSL-3 / HSL-3-B Shear HSL-3-G [kN] 9,0 9,0 9,0 11,3 VRk,seis 9,4 13,2 HSL-3-SH / HSL-3-SK Design resistance in case of seismic category C2 Anchor size M10 HSL-3 / HSL-3-B 8,1 8,1 8,1 Tension HSL-3-G [kN] NRd,seis HSL-3-SH / HSL-3-SK 8,1 7,5 7,5 7,5 HSL-3 / HSL-3-B Shear HSL-3-G [kN] 7,2 7,2 7,2 VRd,seis 7,5 HSL-3-SH / HSL-3-SK -

Updated: Oct-20

M12

M16

M20

25,8 25,8 30,6 34,2 34,2 40,1 40,1 40,1 13,2 13,2 25,4 25,4 25,4 39,1 39,1 39,1 11,3 11,3 22,3 22,3 22,3 25,1 25,1 25,1 -

M12

M16

M20

14,6 17,2 17,2 20,4 22,8 22,8 26,7 26,7 26,7 14,6 10,5 10,5 10,5 20,3 20,3 20,3 31,2 31,2 31,2 9,0 9,0 9,0 17,8 17,8 17,8 20,1 20,1 20,1 10,5 -

Effective anchorage depth for seismic C1 a) Anchor size hef,1b) Eff. Anchorage depth hef [mm] 60 Anchor size hef,1 Eff. Anchorage depth hef [mm] 100 a) b)

M8 hef,2 80 M16 hef,2 125

hef,3 100 hef,3 150

hef,1 125

M10 hef,2 90 M20 hef,2 155

hef,3 110 hef,3 185

hef,1 80

hef,1 150

M12 hef,2 105 M24 hef,2 180

hef,3 130 hef,3 210

HSL-3-SH and HSL-3-SK only available in sizes M8-M12 HSL-3-SH and HSL-3-SK can only be set in position 1.

Characteristic resistance in case of seismic category C1 Anchor size M8 HSL-3 / HSL-3-B 12,0 12,0 12,0 Tension HSL-3-G [kN] NRk,seis HSL-3-SH / HSL-3-SK 12,0 8,9 8,9 8,9 HSL-3 / HSL-3-B Shear 7,5 7,5 7,5 HSL-3-G [kN] VRk,seis 8,9 HSL-3-SH / HSL-3-SK Anchor size M16 Tension HSL-3 / HSL-3-B [kN] 30,6 36,0 36,0 NRk,seis HSL-3-G 57,1 57,1 57,1 HSL-3 / HSL-3-B Shear [kN] VRk,seis 43,4 43,4 43,4 HSL-3-G

Design resistance in case of seismic category C1 Anchor size M8 HSL-3 / HSL-3-B 6,7 6,7 Tension HSL-3-G [kN] NRd,seis HSL-3-SH / HSL-3-SK 6,7 7,1 7,1 HSL-3 / HSL-3-B Shear 6,0 6,0 HSL-3-G [kN] VRd,seis HSL-3-SH / HSL-3-SK 7,1 a) Anchor size M16 Tension HSL-3 / HSL-3-B [kN] 20,4 24,0 NRd,seis HSL-3-G 45,6 HSL-3 / HSL-3-B 40,8 Shear [kN] VRk,seis 34,7 34,7 HSL-3-G

hef,1 70

M10

M12

16,0

21,9

24,0

16,0 22,1 15,3 22,1

22,1 15,3 M20

22,1 15,3 -

21,9 29,1 19,3 29,1

29,1 19,3 M24

29,1 19,3 -

42,8

50,0

56,2

65,0

54,9 45,8

81,8 -

M10

M12

6,7

10,7

14,6

16,0

7,1 6,0 -

10,7 17,7 12,2 17,7

17,7 12,2 M20

17,7 12,2 -

14,6 23,3 15,4 23,3

23,3 15,4 M24

23,3 15,4 -

24,0

28,5

33,3

37,5

43,3

45,6 34,7

43,9 36,6

65,4 -

Updated: Oct-20

Materials Mechanical properties Anchor size M8 HSL-3, HSL-3-G, HSL-3-B, HSL-3-SH, HSL-3-SK Nominal tensile strength fuk [N/mm²] 800 Yield strength fyk [N/mm²] 640 Stressed cross-section As [mm²] 36,6 Moment of resistance W [mm³] 31,3 Design bending resistance without [Nm] 24,0 sleeve MRd,s Material quality Part Carbon Steel HSL-3 Cone HSL-3-G Expansion sleeve HSL-3-B HSL-3-SH Collapsible element HSL-3-SK Distance sleeve Washer HSL-3 Hexagonal bolt Hexagonal nut HSL-3-G Threaded rod HSL-3-B Hexagonal bolt with safety cap HSL-3-SH Hexagonal socket head screw Countersunk bolt HSL-3-SK Cup washer

Updated: Oct-20

M10

M12

M16

M20

M24

800 640 58,0 62,5

800 640 84,3 109,4

800 640 157 277,1

830 640 245 540,6

830 640 353 935,4

48,0

84,0

212,8

415,2

718,4

Material Carbon steel, galvanized to ≥ 5 µm Carbon steel, galvanized to ≥ 5 µm POM Plastic element Carbon steel, galvanized to ≥ 5 µm Carbon steel, galvanized to ≥ 5 µm Carbon steel, galvanized to ≥ 5 µm, rupture elongation ≥ 12% Carbon steel, galvanized to ≥ 5 µm Carbon steel, galvanized to ≥ 5 µm, rupture elongation ≥ 12% Carbon steel, galvanized to ≥ 5 µm, rupture elongation ≥ 12% Carbon steel, galvanized to ≥ 5 µm, rupture elongation ≥ 12% Carbon steel, galvanized to ≥ 5 µm, rupture elongation ≥ 12% Carbon steel, galvanized to ≥ 5 µm

Anchor dimensions of HSL-3, HSL-3-G, HSL-3-B, HSL-3-B, HSL-3-SH, HSL-3-SK Anchor version HSL-3 HSL-3-G HSL-3 HSL-3-G HSL-3-B HSL-3 HSL-3-B HSL-3-SH

Thread size M8

ds [mm]

l1 [mm]

l2 [mm]

l3 [mm]

11,9

15,2

l4 [mm min max 19 214

p [mm] 2

M10

200

14,8

17,2

218

M12

200

17,6

223

M16

200

23,6

54,4

24,4

34,5

224,5

M20

200

27,6

31,5

241

M24

200

31,6

247

11,9

15,2

M10

14,8

17,2

M12

17,6

11,9

15,2

M8 HSL-3-SK

tfix [mm] min max 5 200

18,2

28,2

M10

14,8

17,2

32,2

M12

17,6

Updated: Oct-20

Setting information Setting positions a)

Setting position

 Setting position

 Setting position

 a)

HSL-3-SH and HSL-3-SK can only be set in position 1.

Setting details for HSL-3 Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Setting position Fixture thickness Effective fixture thickness Reduction of fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Setting position Fixture thickness Effective fixture thickness Reduction of fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque

Updated: Oct-20

M10

M12

d0 dcut

[mm] [mm]

12 12,5

15 15,5

18 18,5

[mm]





tfix,1 tfix,i Δi hef,i h1, i hmin,i SW Tinst

[mm]

d0 dcut

[mm] [mm]

20 80 100 170 13 25 M16 24 24,55

[mm]

[mm] [mm] [mm] [mm] [mm] [Nm]

tfix1 tfix,i Δi hef,i h1,i hmin,i SW Tinst

0 60 80 120



[mm] [mm] [mm] [mm] [mm] [mm] [Nm]



5-200



40 100 120 195

25 125 150 275 24 120



5-200 tfix,11) - Δi 0 20 70 90 90 110 140 195 17 50 M20 28 28,55







50 150 175 300





10-200 tfix,11) - Δi 0 30 125 155 155 185 250 380 30 200





5-200 40 110 130 215

0 80 105 160

10-200 0 100 125 200



25 105 130 225 19 80 M24 32 32,7

50 130 155 250









10-200 60 185 215 410

0 150 180 300

30 180 210 405 36 250

60 210 240 435

Setting details for HSL-3-G Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Setting position Fixture thickness Effective fixture thickness Reduction of fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Setting position Fixture thickness Effective fixture thickness Reduction of fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque

M10

M12

d0 dcut

[mm] [mm]

12 12,5

15 15,5

18 18,5

[mm]



tfix,1 tfix,i Δi hef,i h1, i hmin,i



[mm] [mm] [mm] [mm] [mm]

SW Tinst

[mm] [Nm]

d0 dcut df

0 60 80

20 80 100

120

170

SW Tinst









40 110 130

0 80 105

25 105 130

50 130 155

140

215

160

225

250

195

5-200

[mm] [mm]

19 60 M24 32 32,7

[mm]



[mm] [mm] [mm] [mm] [mm]



10-200







0 100 125

25 125 150

50 150 175

10-200 tfix,11) - Δi 0 30 125 155 155 185

200

275

300

250

[mm] [Nm]



5-200 tfix,11) - Δi 0 20 70 90 90 110

17 35 M20 28 28,55



hmin,i

40 100 120 190 a) / 195



13 20 M16 24 24,55

tfix1 tfix,i Δi hef,i h1,i



5-200

24 80

380







10-200 60 185 215

0 150 180

30 180 210

60 210 240

410

300

405

435

30 160

36 180

Setting details for HSL-3-B Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Setting position Fixture thickness Effective fixture thickness Reduction of fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque Setting details for HSL-3-SH a) 9

M12

M16

M20

M24

d0 dcut

[mm] [mm]

18 18,5

24 24,55

28 28,55

32 32,7

[mm]



tfix,1 tfix,i Δi hef,i h1, i

[mm]

hmin,i

[mm] 0 [mm] 80 [mm] 105 [mm] 160

SW Tinst

[mm] [Nm]





5 - 200









 







25 50 105 130 130 155

10 - 200 10 - 200 10 - 200 1) tfix,1 - Δi 0 25 50 0 30 60 0 30 60 100 125 150 125 155 185 150 180 210 125 150 175 155 185 215 180 210 240

225

200

250

275 300

250 380 410 300 405 435

24 30 36 41 The torque moment is controlled by the safety cap

Updated: Oct-20

Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque a)

M10

M12

d0 dcut

[mm] [mm]

12 12,5

15 15,5

18 18,5

[mm]

tfix hef h1 hmin SW Tinst

[mm] [mm] [mm] [mm] [mm] [Nm]

5 60 85 120 6 25

20 70 95 140 8 35

25 80 110 160 10 60

M10

M12

HSL-3-SH can only be set in position 1.

Setting details for HSL-3-SK a) Anchor version Nominal diameter of drill bit Max. cutting diameter of drill bit Max. diameter of clearance hole in the fixture Top diameter of countersunk head in the fixture Bottom diameter of countersunk head in the fixture Height of the countersunk head in the fixture Fixture thickness Effective anchorage depth Min. depth of drill hole Min. thickness of concrete member Width across flats Installation torque a)

d0 dcut

[mm] [mm]

12 12,5

15 15,5

18 18,5

[mm]

22,5

25,5

32,9

[mm]

11,4

14,4

17,4

hcs

[mm]

5,8

6,0

8,0

tfix hef h1 hmin SW Tinst

[mm] [mm] [mm] [mm] [mm] [Nm]

10 – 20 60 80 120 5 25

20 70 90 140 6 50

25 80 105 160 8 80

HSL-3-SK can only be set in position 1.

Updated: Oct-20

Installation equipment Anchor size Rotary hammer Diamond coring Other tools 1)

M10

M12

M20

M24

TE 40 – TE 80 DD 30-W + SPX-T DD DD 30-W + SPX-T 120 + DD-BI 1) blow out pump, hammer, torque wrench

HSL-3-B only requires a regular wrench as it automatically ensures correct torque is applied.

Setting parameters for HSL-3, HSL-3-G, HSL-3-B, HSL-3-SH, HSL-3-SK Anchor size M8 i Setting position     Minimum base material thickness hmin [mm] 120 170 190 140 smin [mm] 60 Minimum spacing for c ≥ [mm] 100 cmin [mm] 60 Minimum edge distance for s ≥ [mm] 100 Anchor size M16 i Setting position     Minimum base material thickness hmin [mm] 200 275 300 250 smin [mm] 100 Minimum spacing for c ≥ [mm] 240 cmin [mm] 100 Minimum edge distance for s ≥ [mm] 240

M16

TE 2 – TE 30

M10

M12











195 70 100 70 160 M20

215

160

225 80 160 80 240 M24

250











380 125 300 150 300

410

300

405 150 300 150 300

435

Updated: Oct-20

Setting instructions *For detailed information on installation of each specific HSL-3 versions see instruction for use given with the package of the product. Setting instruction Hammer drilling 1. Drilling

3. Installation

Diamond drilling 1. Drilling

3. Installation

Updated: Oct-20

2. Cleaning

4. Applying tightening torque

2. Cleaning

4. Applying tightening torque

HSL-3-B Safety cap Hammer drilling 1. Drilling

3. Installation

2. Cleaning

4. Applying torque

5. Throw safety cup away

Diamond drilling 1. Drilling

3. Installation

2. Cleaning

4. Applying tightening torque

5. Throw the safety cup away

DD 30-W + DD-ST 30 13

Updated: Oct-20