X-ET DATA SHEET
Nail for fastening plastic electrical cable tray and junction box
May 2021
X-ET
X-ET Nail for fastening plastic electrical cable tray and junction box Product data Dimensions X-ET UK-H27
UK-H27
1
X-ET MX
o8
2
3
7
31
31
o 3.7
w x l x h = 16.5 x 16.5 x 12 mm
o 15
16.2
28
X-GN 27
X-EGN 14
X-U 16/22/27
28.9
L
L
2.4
o3
o 6.8
X-S 14 B3 MX
X-S 14 G3 MX o 6.8
Ø 8.2
o3 Ls
1.8
Ls
1.8
X-P 22/27
1.8
14 15.8
Ls L
X-C 27 G3 MX o 6.5
X-P: o 6.8
o3
2.4
15.8
X-P 20/24 B3 MX
o 6.8
X-P 20/24 G3 MX
o3 14
Ø 4.0
L
1.8
1.8
27
8
o3
1.9
o 6.8
o3
Ls
1.8
o 6.8
o 6.8
4
X-GHP 20/24
Ls L
1.9
o3 Ls L
o3 14 15.8
Material specifications X-ET X-ET MX
Polyethylene (PE) Polyamide (PA), halogen and silicone free, light grey (RAL 7035) and Polybutylenterephthalate (PBT), silicone free, flame retardant, stone grey (RAL 7030)
Recommended fastening tools
DX 6 MX, DX 5 MX, DX 460 MX, DX 351 MX DX 6 F8, DX 5 F8, DX 460 F8, DX 351, DX 2 GX 120-ME, GX 3-ME, BX 3-ME • See fastener program in the next pages.
05/2021
www.hilti.group
2
X-ET Applications Examples
Cable trunking
Cable trunking
Junction boxes
Conduits & pipes with metal or textile band
Performance data Recommended service load Designation X-ET MX
Service load 0.1 kN
• Recommended service load is determined by the serviceability of the plastic part.
Application recommendation Base material thickness Concrete hmin = 80 mm hmin = 60 mm hmin = 60 mm hmin = 60 mm
tIl ≥ 4 mm
tII
X-U, X-P: X-P B3 MX: X-P G3 MX, X-GHP: X-C 27 G3 MX, X-GN 27 MX:
Steel
Corrosion information
• These zinc-coated fasteners are not suitable for long-term service outdoors or in otherwise corrosive environments. • For more details, please refer to following technical document: Hilti Corrosion Handbook.
3 05/2021 www.hilti.group
X-ET System recommendation • For more details, please refer to the chapter Accessories and consumables compatibility in the Direct Fastening Technology Manual (DFTM). Installation information
= 90°
Conditions for use
• No fastenings on ribs • Underside of trunking must be smooth • X-ET MX only in pre-drilled holes
= 90°
• Material thickness: tI ≤ 2 mm • Material: PVC
min. 16 mm
min. 16 mm
Trunking dimensions and properties
max. 60 mm
Power-actuated tool and fastener recommendation Base material
Cable holder
Power-actuated tool Fastener GX 3-ME
Concrete or masonry
X-ET MX
GX 120-ME BX 3-ME
DX 6 MX, DX 5 MX, X-ET UK-H27 DX 460 MX, DX 351 MX X-ET MX Steel
05/2021
X-P 20/24 G3 MX X-C 27 G3 MX X-GHP 20/24 MX X-GN 27 MX X-P 20/24 B3 MX X-U 22/27 MX X-P 22/27 MX
GX 3-ME
X-S 14 G3 MX
GX 120-ME
X-EGN 14 MX
BX 3-ME
X-S 14 B3 MX
DX 6 MX, DX 5 MX, X-ET UK-H27 DX 460 MX, DX 351 MX www.hilti.group
X-U 16 MX 4
X-ET Cartridge recommendation for fastening to concrete and masonry Base material
Cartridge color (tool power level) Tool type: Tool type: DX 6 MX DX 5 MX, DX 460 MX,
Sand lime masonry
Soft / medium concrete Tough concrete
DX 6 F8
DX 351 MX DX 5 F8, DX 460 F8, DX 351 F8, DX 2
Cartridge type: 6.8/11 M
Cartridge type: 6.8/11 M
titanium ■ (1-5)
green ■, yellow ■
titanium ■ (2-5)
yellow ■, red ■
titanium ■ (4-8)
yellow ■, red ■
• Tool power level adjustment by setting tests on site. • Start tool energy selection with lowest recommended tool power level. Cartridge recommendation for fastening to steel Base material
Cartridge color (tool power level) Tool type: DX 6 MX DX 6 F8
S235, S275, S355
Cartridge type: 6.8/11 M 4 ≤ tII ≤ 14 mm
titanium ■ (2-8)
Tool type: DX 5 MX, DX 460 MX, DX 351 MX DX 5 F8, DX 460 F8, DX 351 F8, DX 2 Cartridge type: 6.8/11 M yellow ■, red ■
• Tool power level adjustment by setting tests on site. • Start tool energy selection with lowest recommended tool power level. System recommendation for gas-actuated tools GX tools
GX 120-ME GX 3-ME
Gas can GC 20, GC 21 and GC 22 Gas can GC 40, GC 41 and GC 42
Fastener program
Item no. and description Designation X-ET UK-H27 X-ET MX
Item no. 251705 285718
Description X-ET
5 05/2021 www.hilti.group