IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Issue 0110
TIERED PLANTER LADDER SUPPORT’ 666mm
1214mm
940mm
Recommended Tools HAMMER
DRILL
TAPE MEASURE
Thank you for choosing this garden product manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it, please note the following: - This product is pressure treated to ensure the longevity of all timber components and to protect against rot. This may leave a colour difference on some parts that will even out as the moisture content stabilises. - If there are any technical queries with the product, please contact our customer help line on 0844 248 9853 between the hours of 8.30 am and 5.00 pm Monday to Friday. - Please ensure that you thoroughly check all component parts for quantity and quality before you commence building the product. If there are any missing parts, please contact the help line as shown immediately. The manufacturer cannot be held liable for damaged items once any part of the product has been fitted or altered in any way (e.g. Painted) - Timber is a natural material. It will shrink and swell as a result of varying moisture content. - Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation. - This product mut be built on a solid level base.
POZI DRIVE SCREWDRIVER
JE
Important : Assembly of this product requires two people.
TPLSFP (Fixing pack) MUST PRE DRILL
TPLSSHELF (Shelf) Qty 2
TPLSPS
40mm SCREW Qty 102
TPLSB (Planter Base) Qty 3
TPLSSLEG (Short Leg) Qty 2
70220278PTR
TPLSLEG ( Leg) Qty 2 TPLSB 90120622PTR Board 90x12x622mm Qty 1
90220300A2PTR (Brace) Qty 2
70220278PTR Board 70x22x278mm Qty 18
Place the planter side panels onto the planter base so that the curved ends are flush. Fix these into position by screwing through the base up into the side panels using 3 x 40mm screws for each side panel Place 70220278PTR boards against the ends of the side panels as shown. Make sure that these are tight against the battens. Fix each board in place using 2 x 40mm screws for each side.
Forest Garden Ltd, Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
50mm SCREW Qty 10
TPLSPS (Planter Side) Qty 6
Issue 0110
MUST PRE DRILL MUST PRE DRILL
TPLSSHELF 90220300A2PTR
445mm
FLUSH
TPLSLEG
700mm
467mm
TPLSSLEG
90120622PTR
PLANTER
Place a TPLSLEG on top of a TPLSSLEG (short leg) to create the A’ frame as shown. The edge of the TPLSSLEG (short leg) must be 700mm from the edge of the TPLSLEG. Make sure the end is flush. Fix these in place by screwing from the outside through the TPLSLEG using 2 x 40mm screws. Place the 90220300A2PTR (brace) board so that it is flush with the edge and tight againt the TPLSLEG. Secure this in place using 2 x 40mm screws through the brace board into the short leg. Using a 50mm screw, screw upwards through the brace at an angle into the TPLSLEG. Repeat the steps to create the other frame. Position one of the frames against the side of one of the planters. Secure this in position using 3 x 40mm screws. One screw for each board. Repeat for the opposite side. Further brace the assembly by securing the 90120622PTR board across the back to link up the two frames. Secure the board into place using 2 x 40mm screws for each side.
Fix the two TPLSSHELF’s in place at the heights shown. Fix each shelf in place by screwing through the frames into the ends of the shelfs using 2 x 50mm screws for each end. Slot the two remaining planters onto the shelfs. Secure these in place as you did with the first planter using 3 x 40mm screws for each side, 1 x 40m screw for each board.