(32)
6
COLD FRAME IMPORTANT, RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
ISSUE 0110
Place and fix the cold frame windows to the frame using 2 x hinges for each.
458
Positioned as shown and fix the larger plate of the hinge to the cold frame and the smaller plate to the window frame using 25mm screws.
1184
CFWINCOMP
786
Important : Assembly of this product requires two people.
CFWINCOMP
JE
MUST PRE DRILL
7
Thank you for choosing this product manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it, please note the following: - Exercise particular care and follow instructions. - This product is pressure treated to ensure the longevity of all timber components and protect against rot. This may leave a colour difference on some parts that will even out as the moisture content stabilises. - Please ensure that you thoroughly check all component parts for quantity and quality before you commence building the product. If there are any missing parts, please contact the help line as shown immediately. The manufacturer cannot be held liable for damaged items once any part of the product has been fitted or altered in any way (e.g. Painted) - Timber is a natural material. It will shrink and swell as a result of varying moisture content. - Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation. - If there are any technical queries with the product, please contact our customer help line on 0844 248 9853 between the hours of 8.30 am and 5.00 pm Monday to Friday.
(4)
CFFRONT (Cold frame front) Qty 1
CFBACK (Cold frame Back) Qty 1
Place the handles on to the front of the cold frame windows, positioned centrally, and fix in place using the screws provided.
CFWINCOMP (Cold frame window) Qty 2
28280690PTR (Lgprop) 28 x 28 x 690mm (Qty 2)
CFLHS (Cold frame Left Hand Side) Qty 1
CFRHS (Cold frame right hand side) Qty 1
28280118PTR (Smprop) 28 x 28 x 690mm (Qty 2)
COLDFRAMEFP (FIXING PACK)
Forest Garden plc. Units 291 & 296 Hartlebury Trading Estate Hartlebury Worcestershire Dy10 4JB E-mail: info@forestgarden.co.uk
25mm screws
REQUIRED TOOLS : (NOT SUPPLIED)
32
50mm screws
10
DRILL
POZI DRIVE SCREWDRIVER
2
4 TAPE MEASURE
ISSUE 0110
(2)
1 CFBACK
4 Secure the back panel to the right hand side using 2x50mm screws.
CFRHS
(2)
(2) Place the two large props on the inside of the left and right side panels. Fix each in place using a single 50mm screw at one end, making sure that the prop can pivot.
2
Repeat the same step as before with the left hand panel
CFLHS
(2)
3
(2)
5
Place the front panel so that it meets up with the two side panels. Secure using a 50mm screw for each side Place the two small props on the inside of the front panel on both sides of the central batten. Fix each in place using a single 50mm screw at one end, making sure that the prop can pivot.
CFFRONT
(12)
6
COLD FRAME IMPORTANT, RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
ISSUE 0110
Place and fix the cold frame window to the frame using 2 x hinges. Position as shown and fix the larger plate of the hinge to the cold frame and the smaller plate to the window frame using 25mm screws.
773
458
592
CFWINCOMP
CFWINCOMP
Important : Assembly of this product requires two people.
JE
MUST PRE DRILL
7
Thank you for choosing this product manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it, please note the following: - Exercise particular care and follow instructions. - This product is pressure treated to ensure the longevity of all timber components and protect against rot. This may leave a colour difference on some parts that will even out as the moisture content stabilises. - Please ensure that you thoroughly check all component parts for quantity and quality before you commence building the product. If there are any missing parts, please contact the help line as shown immediately. The manufacturer cannot be held liable for damaged items once any part of the product has been fitted or altered in any way (e.g. Painted) - Timber is a natural material. It will shrink and swell as a result of varying moisture content. - Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation. - If there are any technical queries with the product, please contact our customer help line on 0844 248 9853 between the hours of 8.30 am and 5.00 pm Monday to Friday.
(2)
SCFFRONT (Cold frame front) Qty 1 SCFBACK (Cold frame Back) Qty 1
Place the handle on to the front of the cold frame window, positioned centrally, and fix in place using the screws provided.
CFWINCOMP (Cold frame window) Qty 1
28280690PTR (Lgprop) 28 x 28 x 690mm (Qty 1)
CFLHS (Cold frame Left Hand Side) Qty 1
CFRHS (Cold frame right hand side) Qty 1
28280180PTR (Smprop) 28 x 28 x 690mm (Qty 1)
COLDFRAMEFP (FIXING PACK)
Forest Garden plc. Units 291 & 296 Hartlebury Trading Estate Hartlebury Worcestershire Dy10 4JB E-mail: info@forestgarden.co.uk
25mm screws
REQUIRED TOOLS : (NOT SUPPLIED)
32
50mm screws
10
DRILL
POZI DRIVE SCREWDRIVER
2
4 TAPE MEASURE
ISSUE 0110
3
(2)
1
(2) Place the front panel so that it meets up with the two side panels. Secure using a 50mm screw for each side
CFRHS SCFBACK
Secure the back panel to the right hand side using 2x50mm screws.
SCFFRONT
4 (2)
(1) Place the large prop on the inside of the side panel. Fix in place using a single 50mm screw at one end, making sure that the prop can pivot.
2
Repeat the same step as before with the left hand panel
(1)
CFLHS
5
Place the small prop on the inside and middle of the top batten of the front panel. Fix in place using a single 50mm screw at one end, making sure that the prop can pivot.