Gainsborough Gazebo Seat Assembly Instructions
Before Assembly. We recommend that time is taken to read the instructions before starting assembly. For best results follow the step by step guide. The Instruction sheet is only a guide to the assembly. Certain items may not be shown to scale. Note: This product may have to be pre-drilled prior to assembly where applicable.
Components Seat Base Leg Frame Support Rail
Quantity 1 2 1
Fixing Kit 50mm Screws 40mm Screws
Quantity 8 4
Recommended tools for Assembly Cross head Screw Driver 3m Tape Ruler Hammer Sharp Knife Spirit Level
Diagram 1 Under View of Seat Base Leg Assembly
• •
Place seat base upside down on a flat surface. Secure leg frame by screwing through seat base from outside into the upright framing of each leg frame using 4x 50mm screws for each leg frame.
Diagram 2 Side View of Leg Frame
Support Rail
•
•
Position support rail onto the horizontal framing of each leg frame ensuring its flush with leg frame at each end. Secure support rail to leg frames using 2x 40mm screws at each end of support rail.
2003 © Rowlinson Garden Products