Spring spring
& summer Summer
SAvings NEW
PREMIUM HYBRID POLYMER GARDEN HOSES Engineered Hybride Polymer, combining PVC and rubber material for improved flexibility in extreme temperatures
150 PSI (Working) 450 PSI (Burst) K-5058GH K-10058GH
5/8” x 50 ft.
Extreme All-Weather Flexibility Kink resistant INFRARED DIGITAL RV GENERATOR THERMOMETER WITH ADAPTER LASER POINTER
-50°C~550°C -58°F~1022°F
$39.99
KCG-10000GE
• AVR system and electronic ignition • Low oil shut-off with indicator light protects the engine • Two duplex outlets: 120V/20 Amp AC • Two twist lock outlets: 120V/30 Amp and 120V/240V/30 Amp AC • Keyed electric start and easy start recoil starter • AC double throw circuit breaker and resets for safe operation • Neutral bonded to frame • CSA & EPA approved
$899.99
$39.99 $69.99
Temperature range:
10,000W GASOLINE GENERATOR WITH ELECTRIC START & WHEEL KIT
5/8” x 100 ft.
K-550
K-TT30R
This adapter allows a generator with a NEMA L5-30R 125V twist lock receptacle to be connected to recreational vehicles that use typical RV extension cords
NEW
stroke air 15 HP 4cooled OHV engine
GENERATOR EXTENSION CORDS K-L1430-10
Extension cord length: 10 feet Gauge (AWG)/Cord: 12 (SJTW 4/C) Number of 120V plugs: 4
Extension cord length: 25 feet Gauge (AWG)/Cord: 10 (SJTW 4/C) Number of 120V plugs: 4
$34.99
Resets
LED DUAL-HEAD WORK LIGHT with adjustable TRIPOD • Quick release latch • TWO (2) LED work lights • For indoor and outdoor use in dry locations
• Compound cuts (miter and bevel) up to 45° to the left • Comes with retractable extension wings, vertical hold down vise, and dust bag
Extension cord length: 25 feet Gauge (AWG)/Cord: 10 (SJW 4/C) Number of 120V plugs: 4
NEW
$69.99
$69.99
12 AMP. CIRCULAR SAW 8307N
NEW
Each work light contains 100 LEDs which emit 2400 lumens
Includes 10” carbide blade
Lighted End
7 1/4”
LED WORK LIGHTS
8380
K-L1430-25-4T
NEW
$12.99
MITER SAW WITH TWIN LASER
Converts a Nema L14-30P 240V 30 Amp Twist Lock plug into Nema 5-15/20R 120V 20A receptacles
K-L1430R-25
NEW
10” SLIDING COMPOUND
$179.99
2015
www.kingcanada.com
• •
Durable steel shoe with depth adjustment and adjustable bevel stops at 0° and 45° Comes with 24 tooth carbide tipped blade, arbor hex. key and adjustable edge guide
NEW
1/2”
HAMMER DRILL 8309N
• Forward/reverse switch • Drill or hammer mode switch • Depth stop gauge for depth drilling
6.3 amp. motor
$49.
99
$49.99
$99.99
KC-2401LED
KC-2402LED-ST
$49.99
9” WOOD BANDSAW WITH LASER KC-902C
Adjustable work light
•Laser guide system indicates the cut line for reliable cuts every time •0° to 45° square Enhanced tilting table Laser Effect •Comes with blade, miter gauge, rip fence, work light and light bulb
$149.99 59 1/2” WOOD CUTTING BANDSAW BLADES Model Length Width TPI Thickness Price KBB-9-6 59 1/2” 1/4” 6 .014” $15.99 KBB-9-8 59 1/2” 3/8” 8 .014” $15.99
16” VARIABLE SPEED SCROLL SAW KC-163SSC-V
COMPOUND MITER SAWS 8 1/4” COMPOUND MITER SAW WITH TWIN LASER
10” COMPOUND MITER SAW WITH LASER 8324N
8320SC
• Powerful 11 amp, 5,500 RPM motor • Compound cuts (miter and bevel) up to 45° to the left • 2-1/8” x 4-3/4” straight cut capacity at 90°
Enhanced Laser Effect
Enhanced Laser Effect
Includes 10” carbide blade
Includes 8 1/4” carbide blade
$89.99
$119.99
10” SLIDING DUAL COMPOUND MITER SAW WITH TWIN LASER
12” SLIDING DUAL COMPOUND MITER SAW WITH TWIN LASER
8385N
8390N
•15 amp. motor •3,600 RPM belt drive motor •Dual compound cuts Enhanced (miter and bevel) Twin Laser up to 45°left & right •Comes with dust Effect bag, extension bars and table vise
•15 amp. motor, 5000 RPM •Dual compound cuts (miter and bevel) up to 45° left and right •Comes with retractable extension wings, vertical hold down vise, and dust bag
• 1.5 amp. motor • Table tilts (angle cutting up to 45º) • Adjustable blade tension knob
• 15 amp. motor • 4800 RPM • Rotating table has 9 position stops at 0°, 15°, 22.5°, 30° and 45° right and left • Comes with dust bag, extension bars and table vise
Enhanced Twin Laser Effect
Includes 12” carbide blade
Includes 10” carbide blade
$229.99
$299.99
UNIVERSAL FOLDING MITER SAW STAND UNIVERSAL POWER TOOL WORKSTATION
$129.99
K-2650
4 1/2” X 1 1/2” WET/DRY SHARPENER
K-2750
INCLUDES
• 52” to 114” adjustable extensions to handle extra long stock
Quick release mounting brackets and mounting hardware
• 68” to 114” working length • 4 power outlets (120V)
Adjustable work light
KC-4500S
• 4-1/2” x 1-1/2” 220 grit wheel runs at 170 RPM • Forward/reverse • Wheel runs through water bath
$69.99
COMBINATION 4”x 36” BELT AND 6” DISC SANDER
KC-705L-5 • Miter gauge • Adjustable tilting table
400 lbs capacity
$99.99 BENCH GRINDER STAND
5.2 amp. motor
SS-150
$129.99 6” STICK-ON ADHESIVE DISCS Model Disc size Grit Units/Kits SD-6-K-60 6” 60 3 SD-6-K-80 6” 80 3 SD-6-K-100 6” 100 3 SD-6-K-120 6” 120 3
2
OPTIONAL 2 PC. QUICK MOUNT SUPPORT KIT KW-124
Price $5.99 $5.99 $5.99 $5.99
4”x 36” SANDING BELT KITS Model Belt Size Grit Units/Kits Price SB-436-K-60 4”x36” 60 2 $6.99 SB-436-K-80 4”x36” 80 2 $6.99 SB-436-K-100 4”x36” 100 2 $6.99 SB-436-K-120 4”x36” 120 2 $6.99
$199.99
BENCH GRINDERS 6”
KC-690L
•3.5 amp. motor •3500 RPM
$59.
99
$57.99
6”
K-2800
• Maximum clamping width 38” • Height of clamping table 31 1/2” • Maximum clamping force 1metric ton • Maximum weight capacity 220 lbs • Folds quickly for storing
LOG JAWS ATTACHMENT FOR PORTABLE CLAMPING WORKSTATION
KC-890
•7 amp. motor •3450 RPM
$84.99
$27.99
PORTABLE CLAMPING WORKSTATION
KC-690
$47.99
32 3/4” high
500 lbs capacity
$27.99 •3.5 amp. motor •3500 RPM
OPTIONAL 2 PC. QUICK MOUNT SUPPORT KIT KW-125
8”
KW-136
$99.99 $17.99
INSPECTION CAMERA WITH LCD MONITOR KC-9050
Kit includes: • Camera handle, 9mm dia. x 39” flexible-obedient camera probe • 2.4” diagonal TFT-LCD color monitor, • Kit comes with 3 accessory tools (45° mirror, magnetic pick-up, pick-up hook) and
WIRELESS INSPECTION CAMERA WITH RECORDABLE LCD MONITOR
4.5MM CAMERA PROBE FOR INSPECTION CAMERAS
Kit includes: Camera handle, 39”x 9mm flexible-obedient camera probe, 39” x 10mm camera probe extension, 3.5” TFT-LCD wireless color monitor, monitor Li-ion charger, 3 accessory tools (45º mirror,magnetic pick-up, pick-up hook), USB and Video
• 4.5mm diameter x 39” flexible-obedient camera probe waterproof to IP67 standards • LED lights inside the camera probe tip illuminate dark spaces
KC-9200
4 AA batteries
cables, 4GB SD memory card and 4 AA batteries DIGITAL ZOOM
3X
$99.99
$199.99
KW-9123
Ideal for inspection of very small hard-to-reach or hard-to-see areas
$69.99
5” x 6” METAL CUTTING BANDSAW
$399.99 Length Width Blade Material TPI 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
H.S.S. H.S.S. H.S.S. H.S.S. Bi-Metal Bi-Metal
64 1/2” 1/2”” Bi-Metal
10 14 18 24 10 14
18
.025
8 Amp. MOTOR
$29.99
PRESSURE ABRASIVE SANDBLASTERS
KSB-10 20 GALLON
KSB-20
Comes in a moulded plastic box
$15.99
$159.99 20 GALLON
$19.99
$69.99 5 GALLON
KPW-220
• Safety lever has fusible link • Durable pump included
300 PC. DRILL & BIT ACCESSORY KIT KDB-300K
$59.99 DRILL PRESS CHUCK SAFETY GUARD KM-116 Fits KC-116C & KC-116FC
ON-OFF switch for power and light located in the front of the machine
•7.5 amp. motor •16 speeds (210-3670 R.P.M.) •13” Swing •3 1/8” Stroke •5/8” Chuck
KM-059
• Safety lever has fusible link • Durable pump included
KW-019
KC-116C
$219.99
RECIRCULATING PARTS WASHERS
KPW-205
•3.2 amp. motor •10” swing •2 3/8” stroke •1/2” chuck
DRILL PRESS Enhanced WITH Laser Effect DUAL LASER GUIDE SYSTEM
$179.99
CLEANING BRUSH FOR PARTS WASHERS
KC-110C
BONUS
4”DRILL PRESS VISE KPV-4 With the purchase of # KC-116C
Enhanced Laser Effect
$149.99
$29.99
Thickness Price
.025 $11.99 .025 $11.99 .025 $11.99 .025 $11.99 .025 $29.99 .025 $29.99
• Heavy-duty all steel construction • Safety pressure relief valve • Loading abrasive is made simple using the concave funneltop of the tank • 1/2” (I.D.) x 8 ft abrasive feed hose • Includes media gun, 4 interchangeable nozzles (2, 2.5, 3 & 3.5mm), Protective water separator blast filter, protective blast hood included hood and teflon tape
10 GALLON
•2.5 amp. motor •5 speeds (620-3100 R.P.M.) •8” swing •2” stroke •1/2” chuck
H.S.S. & BI-METAL BLADES (”SKIP TOOTH”)
KBB-115-BM-18
KC-108C
29 (1/16”-1/2” x 1/6 4”)
64 1/2” 64 1/2” 64 1/2” 64 1/2” 64 1/2” 64 1/2”
10” DRILL PRESS WITH DUAL LASER GUIDE SYSTEM
PRESS
29 PC. TITANIUM 25 PC. RUBBER SANDING DRUM DRILL BIT SET KIT KDB-29T
• 3 speeds (80-120-200 FPM)
KBB-115-10 KBB-115-14 KBB-115-18 KBB-115-24 KBB-115-BM-10 KBB-115-BM-14
8” DRILL
$89.99
KC-129C
Model
DRILL PRESSES & accessories
$19.99
ON-OFF switch for power and light located in the front of the machine
Enhanced Laser Effect
BONUS
4”DRILL PRESS VISE KPV-4 With the purchase of # KC-116FC
$269.99
14’’ CUT-OFF SAW 8342N
• Standard 14” abrasive wheel • Spark deflector for safe operation • Quick release vise for holding workpiece, allows cuts up to a 45° angle • Onboard abrasive wheel wrench storage
$139.99
DRILL PRESS WITH DUAL LASER GUIDE SYSTEM KC-116FC
•7.5 amp. motor •16 speeds (210-3670 R.P.M.) •13” Swing •3 1/8” Stroke •5/8” Chuck
Powerful 15 amp. motor
$309.99
3
WET-DRY VACUUMS
8520LP
5
5
20 LITERS Gallon us
8
30 LITERS Gallon us
$129.
6.5 16 PEAK HP
$39.99
RC-110 (110V)
99 Minute Timer
$79.99
• 120° Infrared ray receiving angle • Includes mounting hardware and 2 AAA batteries
DUST COLLECTORS & accessories KC-1101C
60 LITERS Gallon us
KAC-1050
1050 CFM
•1/3 HP, 2.5 amp. motor • Air suction capacity of 556, 702,1050 CFM • 2 stage filtration, one disposable electrostatic 5 microns outer filter and 1 micron inner three pocket filter
• .9 amp. motor • Air capacity of 410 CFM • 2 stage filtration, one disposable electrostatic 5 microns outer filter and 1 micron inner two pocket filter
SS-426
REMOTE POWER CONTROL SYSTEM
3 SPEED AIR CLEANER WITH REMOTE CONTROL
410 CFM
KAC-410
PORTABLE PLANER STAND
$29.99
$219.
3 SPEED AIR CLEANER WITH REMOTE CONTROL
OPTIONAL
PLANER DUST HOOD Fits 12 1/2” planer
99
40 LITERS Gallon us
OPTIONAL
KW-076
• Double filtration system • Tank water drain •18 ft. power cord with convenient power cord wrap posts • Comes complete with 8 ft. x 2-1/2” flex hose, 2 pc. 2-1/2” extension wand, contoured handle with air control, cartridge filter, foam filter, 14” floor sweep with squeegee insert, gulper tool, crevice tool and hanging accessory storage bag
99
10
PEAK HP
8560LST
• Double filtration system • Tank water drain • Power cord wrap for 12 ft. power cord • Comes complete with 6 ft. x 1-1/4” hose, 2 pc. extension wand, 40L dust bag, cartridge filter, foam filter, reusable filter, 10” floor sweep and crevice tool
5
$299.99
$74.99
8540LST
PEAK HP
15 amp. •6” Max. planing thickness MOTOR •1/8” Max. depth of cut • 2 double edged reversible knives
• Double filtration system • Tank water drain • Power cord wrap for 12 ft. power cord • Comes complete with 6 ft. x 1-1/4” hose, 2 pc. plastic extension wand, 30L dust bag, cartridge filter, foam filter, reusable filter, 10” floor sweep and crevice tool
$54.99 3.5
KC-426C
8530LP
• Double filtration system • Comes complete with 6 ft. x 1-1/4” thread-on hose, 3 pc. plastic extension wand, 20L dust bag, foam filter, reusable filter, 10” floor sweep and crevice tool
PEAK HP
12 1/2” PORTABLE PLANER
• 4” Inlet and outlet • Complete with wheel castors for portability
590 CFM
$149.99
3/4 HP
MOTOR
KC-1105C
• Heavy duty bag • Comes complete with 10’ hose, dust hood, dust hood support and wheel castors for portability
600 CFM 1 HP
$199.
99
$199.99
COMES WITH 3-SPEED REMOTE CONTROL
See through plastic bottom dust bag KDCB-5
1 Cloth bottom dust bag KDCB-3105B
PVC HOSE 4”-K-1034-50 CLEAR FLEXIBLE COLLAPSIBLE PVC HOSE
4”-K-1033-50
$2.99
Lin. Ft.
ALUMINUM BLAST GATE
4” - K-1142
4” T-FITTING
K-1007
K-1013
4” ELBOW
4” Y-FITTING
K-1017
K-1015 99
$1.99
1 Micron felt upper bag
600 CFM
1200 CFM
1 HP
12 Amp.
MOTOR
MOTOR
$7.99
Lin. Ft.
$7.
$7.99
27 PC 4” DUST COLLECTION HOOK-UP SYSTEM
1”- 6” UNIVERSAL ADAPTOR
KW-270
27 pc kit includes; • 4 pc- 4” x 36” Clear tubes • 1 pc- 4” x 7” Clear tube • 2 pc- 4” 45 degree elbows • 2 pc- 4” 90 degree elbows • 7 pc- 4” adaptor fittings • 2 pc- 4” Blast gates Ideal for connecting two machines to a dust collector • 1 pc- 4” Y-fitting • 8 pc- retaining Brackets (including16 screws and 16 wall plugs)
4
• Improved metal impellers -for maximum air flow performance • 4” diameter dust ports accept accessory hoses for attaching up to 2 machines • Comes with wheel castors for portability
1 Micron felt upper bag
$16.99 $29.99
4” BLAST GATE
KC-3105C
• Improved metal impellers - for maximum air flow performance • 4” diameter dust ports • Comes with wheel castors for portability
To maximize the cyclonic air flow in the drum
$2.99 $7.99
4” WIRE HOSE CLAMP
KC-2105C
K-1056 K-1017
$19.99
$29.99
$329.99
DUST COLLECTION SEPARATOR with ELBOW
5 BAGS PER BOX
Fits KC-3105C
4”-K-1317
COMES WITH 3-SPEED REMOTE CONTROL
MOTOR
K-1039 99
$7.
$109.
99
4” SPLICE K-1019
$7.99
Dust bag comes with see-through window
$249.99
$399.99
WOOD LATHES
10” JOBSITE SAW WITH FOLDING STAND
12” x 18” VARIABLE
KC-5100C
KWL-1218VS
• Reliable single board computer microprocessor for precise control • Precise spindle speed digital readout • 24 indexing positions with spindle lock • Comes complete with 3” faceplate, 6” & 12” tool rests with 5/8” post diameter, MT#2 spur centre and MT#2 heavy- duty live centre, safety goggles, knock-out rod, tool storage rack, screwdriver and 4 hex. keys
$329.99
$539.99
6’’ x 48’’ BELT AND 9’’ DISC SANDER WITH QUICK RELEASE LEVER
1HP
MOTOR
KC-760L
6”x 48” SANDING BELT KITS Model Belt Size Grit Units/Kits Price SB-648-K-60 6”x48” 60 2 $9.99 SB-648-K-80 6”x48” 80 2 $9.99 SB-648-K-100 6”x48” 100 2 $9.99 SB-648-K-120 6”x48” 120 2 $9.99 9” STICK-ON ADHESIVE DISCS Model Disc size Grit Units/Kits Price SD-9-K-60 9” 60 3 $5.99 SD-9-K-80 9” 80 3 $5.99 SD-9-K-100 9” 100 3 $5.99 SD-9-K-120 9” 120 3 $5.99
KWL-1016C
• All precision-machined cast-iron bedway • 6 speeds (480, 1270, 1960, 2730,3327, 4023) RPM • Complete with MT#2 live center, MT#2 spur center, 3” faceplate, steel knock-out bar, hex. keys and safety glasses
$349.99
$339.99
EXT-1016
KWL-1443VS
• Spindle tachometer with digital readout • Variable speed from 600 - 2,400 RPM • Quick release headstock, tailstock and tool rest assembly for easy adjustments • Comes complete with 6” face plate, 12” tool rest with offset and base, MT#2 headstock and tailstock centres and adjustment wrenches
$649.99
$499.
8 PC. WOOD LATHE 4 JAW - 4” WOOD CHISEL SET LATHE CHUCK
6.6 amp. MOTOR
KW-043
KC-1401FX
1 1/2” x 1 1/2” x 8 1/2”
$10.99
FOLDING ROLLER 3 in 1 FOLDING ROLLER STAND STAND
7.5 amp. MOTOR
KRS-108
KRS-102
• Stand height is adjustable from 27” to 44”
14” x 14” cast iron table
•Easily change from a roller, omni-directional or a flat support • Stand height is adjustable from 27” to 44”
OPTIONAL
NEOPRENE WHEEL PROTECTOR FOR 14” WOOD BANDSAWS KW-094
$17.99
93” WOOD CUTTING BANDSAW BLADES Model Length Width TPI Thickness Price KBB-1418-14 93” 1/8” 14 .025” $16.99 KBB-1414-6 93” 1/4” 6 .025” $16.99 KBB-1436-10 93” 3/16” 10 .025” $16.99 KBB-1438-6 93” 3/8” 6 .025” $16.99 KBB-1412-6 93” 1/2” 6 .025” $16.99 KBB-1412-8 93” 1/2” 8 .025” $16.99 KBB-1434-4 93” 3/4” 14 .025” $16.99
KPRO-08
KW-100
$69.99
$99.99
•Long 10” hard wood handles •Comes in a wood box
ABRASIVE CLEANER
14” WOOD CUTTING BANDSAW
$99.
Pivoting headstock turns 180°and locks into position for outboard turning
WOOD LATHE WITH DIGITAL READOUT
99
RIP FENCE SYSTEM WITH RESAW GUIDE 99 RF-1433R
$99.99
OPTIONAL
MOTOR
14” X 43” VARIABLE SPEED
• 29 1/2” x 4 1/2” fence size • Built-in 4” dust chute JACK SCREW CUTTERHEAD • Adjustable fence SYSTEM at 45° & 90°
$499.
1/2 HP
Extension bed increases the spindle turning capacity to 38”
Table Size
99
Extension bed increases the spindle turning capacity to 44”
Heavy-duty cast-iron construction
WOODWORKING 6” x46” JOINTER
• Induction motor, blade and miter gauge included • 15° left, 45° right square tilting table
Variable speed from 450 - 3,800 RPM
WOOD LATHE
(15 Amp @ 110V) (7.5 Amp @ 220V)
KC-150C
$99.99
OPTIONAL EXT-1218VS
10” x 16”
• Two 2-1/2” dust chutes with 2-1/2” to 4” adaptor for dust collector hook-up • Comes complete with miter gauge, 2-1/2”to 4” dust chute adaptor and sturdy enclosed cabinet stand
6”
Forward & Reverse function
SPEED WOOD LATHE
• Blade tilts 0° to 45° • Comes with 10” x 40 tooth blade, rip fence, miter gauge, Standard and Dado table inserts, push stick and wrenches
1 HP high performance DC motor
KSC-1024T 10” X 24T
$15.99
Ideal to determine miter saw and table saw blade angles, as well as jointer fence and bandsaw table angle
$29.99
7 1/4” X 24T
7 1/4” X 40T
$4.99
$7.99
KSC-1040T
KSC-1060T
$19.99
$29.99 $36.99
10” X 40T
10” X 60T
KSC-740T
KSC-1060TCG 10” X 60T
KSC-1080T 10” X 80T
$39.99
KSC-824T
KKC-50
KSC-840T
8 1/4” X 40T
$8.99
$9.99
12” X 72T
$49.99
$59.99
8˝ DADO BLADE SET
99 KSC-8000
8 1/4” X 24T
KSC-1272T
For Jointers
MAGNETIC & MICRO ADJUSTABLE KNIFE JIG ALIGNMENT KIT
$39.
KSC-724T
CARBIDE TIPPED SAW BLADES
KKC-60 99
$49.99 $29.
KMB-1250
MAGNETIC DIGITAL ANGLE GAUGE KW-180
11-3/4” Roller width
$19.99
KNIFE JIG ALIGNMENT KIT
EXTENDABLE UNIVERSAL MOBILE BASE •500 lbs. Max.
Dust chute
Fits models KWL-1016C, KWL-1218VS & KWL-1443VS 1” x 8 T.P.I.
KSC-1296T 12” X 96T
$49.99
•Carbide-Tipped 24 tooth ATB-R Dado blades • Cuts grooves from 1/8” to 13/16” wide • 5/8” Arbor, 7,000 maximum R.P.M. • Comes with 14 pc. Dado Shim Set
$79.99
5
PORTABLE CEMENT MIXER KC-15CM-2
• 3.5 cubic feet drum capacity is designed to mix two 90 lbs bags of dry cement or mortar mix with water • Enclosed 1/3 HP motor • Belt driven motor and reduction gear drive
1/3 HP
3.5 CU. FT.
TILE SAWS & accessories
7” SLIDING TILE SAW WITH LASER GUIDE KC-3008
10” SLIDING TILE SAW WITH LASER GUIDE
3/4 HP
Direct drive motor
• 3,600 RPM motor • Comes complete with 7” diamond continuous rim blade, 45° & 90° rip guides and sturdy folding stand
2.5 HP
KC-3010NB
• 3,600 RPM motor • Comes complete with 10” diamond continuous rim blade, 45° & 90° rip guides, 45° bevel guide and sturdy folding stand
$199.99
$399.99 Enhanced Laser Effect
NEW
Move tile saw from one site to another with stand in opened or folded position
$239.99 13” PROFESSIONAL LAMINATE FLOORING CUTTER KC-13LCT
• Cuts a variety of materials, up to 13” wide and 19/32” thick • Table miter gauge for angled cuts from 0-45° • Cuts with 13” H.S.S. knife
13” HSS KNIFE KW-133
Replacement Blade
16” DIGITAL ANGLE FINDER KW-400
• Measure precise angles, draw cut marks or use it as a powertool accessory • Digital LCD display indicates precise degree measurements (0.05° resolution) • Powered by a 9V battery (included)
$139.99
$29.99 $39.99
TILE INSTALLATION KIT K-3000
$54.99
7’’ TILE SAW
$59.99
10” DIAMOND BLADE KSC-10DB-W Replacement Blade
$29.99
7’’ TILE SAW
2/3 HP
KC-3004ST
3500 RPM motor
• Adjustable cutting table tilts from 0°-45° • Increased cutting capacity up to 14” to the right of the blade and up to 18” to the left • Comes with adjustable rip fence, V-push block for miter cuts and adjustment keys
$79.99
14” max rip capacity (right) 18” max rip capacity (left)
HORIZONTAL LOG SPLITTERS
• Hangs drywall in sizes up to 4 ft. x 16 ft. on any ceiling or wall up to 11 ft. high • Tripod foot brake keeps drywall lift in position during use • Easy to assemble and disassemble, can be placed in car trunk
5 TON 20” LOG SPLITTER
OPTIONAL 20” STAND SS-5LS Fits: KC-5LS
KC-5LS
• 20 1/2” x 12” capacity for splittling firewood • Uses standard hydraulic oil • Can be used on floor or bench for maximum versatility
$299.99
1/4” DRYWALL SCREWDRIVER
6
$19.99
KDL-11
$169.
Replacement Blade
Comes with tungsten carbide 2/3 HP rodsaw drilling tip, tilenippers 3500 RPM motor KC-3003N for more radius cutting, tile pliers to snap scorelines, 1-1/2” • Adjustable cutting table tilts from 0°-45° spatula, grout line saw, chipping • Water reservoir for cooling the blade hammer, 4-1/2” x 11” trowel • Comes with adjustable rip fence, V-push block for miter cuts and adjustment key
DRYWALL AND PANEL LIFT
99
7” WET TYPE DIAMOND BLADE KSC-7DB-W
8315
Included
5.8 amp. motor
1/4” Phillips #2 screwdriver bit
$59.99
2 HP INDUCTION 15 AMP. MOTOR
$69.99
6 TON 21” LOG SPLITTER KC-6LS
UNIVERSAL ANTI-WEAR HYDRAULIC OIL KW-127
• 21” x 10” capacity for splittling firewood • Uses standard hydraulic oil • Can be used on floor or bench for maximum versatility
$349.99
850ml
2 HP INDUCTION 15 AMP. MOTOR
$8.99
ALL SEASON GENERATOR COVERS • Made of heavy-duty tarpaulin with PVC vinyl coating • Provides all season protection from rain, snow, dust, dirt and sun damage from UV rays • Waterproof and flameproof B2 coating • Designed to fit King and similar sized generators with folding handle(s) and wheel kits installed
NEW
950W PORTABLE GENERATOR KCG-951G
2000W GASOLINE DIGITAL INVERTER GENERATOR
KCG-2001i
2 HP
2 stroke air cooled OHV engine
Comes with USB port
$159.99
K-42CVR
K-85CVR
Fits Generators: KCG-3500G, KCG-4200G
Fits Generators: KCG-5625G, KCG-6501G, KCG-7500G, KCG-7501GE, KCG-8500GE
$39.99
$39.99
K-100CVR
Fits Generators: KCG-9000GE, KCG-10000GE
$39.99
1500W GASOLINE GENERATOR
4200W GASOLINE WITH WHEEL KIT KCG-4200G
KPW-3001FM
7 HP
$399.99 $999.99 HORIZONTAL/VERTICAL GAS LOG SPLITTERS 4 stroke air cooled OHV engine
4 stroke air cooled OHV engine
GASOLINE WATER PUMPS
3”
2”
NPT inlet and outlet
6.5 HP
4 stroke air cooled OHV engine
$299.99 KCG-3PG
WATER PUMP HOSE KITS
Each hose kit comes with a type A threaded camlock adaptor
KW-253 3” X 25 ft
6.8 HP
7 HP
4 stroke air cooled OHV engine
• 92’ Total head lift (total height at sea level, to which water can be raised above original water level) • Oil sensor shuts off engine when oil level is low Easy start recoil starter • Comes with 3 wire clamps, 4 hose adaptors, NPT inlet and outlet 4 rubber gaskets, strainer basket and strainer
KW-252 2” X 25 ft
starter keys & 2 remotes
• Sine wave digital inverter generator provides stable current to power voltage-sentitive electronics 3 HP • Duplex outlet: 120V/20 amp AC 4 stroke air • Twist lock outlet: 120V/30 amp AC cooled OHV engine • DC outlet: 12V/8.3 amp output battery, DC cables, extra spark plug, spark plug socket, GENERATOR •12V oil fill container, screwdriver and oil drain pipe
• 3000 PSI, 2.3 GPM maximum water flow • Thermal relief valve on pump to protect against overheating • 25’ high pressure hose and inlet hose quick connect coupling • Comes with 10” pneumatic wheels for portability and 5 quick connect nozzles ( 0°, 15°, 25°, 40° and detergent)
$129.99
NEMA L5-30R twist lock receptacle on one side and an RV NEMA TT-30R receptacle on the other
• AVR system and electronic ignition • Low oil shut-off with indicator light protects the engine • Duplex outlet: 120V/20 Amp AC • Twist lock outlet: 120V/240V/30 Amp AC • AC double throw circuit breaker and resets for safe operation
3000 PSI GASOLINE HIGH PRESSURE WASHER
$69.99
$119.99
This kit allows parallel connectivity between two identical Inverter Generators for combined output power
$279.99
4 HP
CLEAR PVC REINFORCED SUCTION HOSES
INVERTER GENERATOR PARALLEL CABLE KIT K-X2P
KCG-3000i
4 stroke air cooled OHV engine
KCG-2PGN
NEW
3000W DIGITAL INVERTER GENERATOR WITH REMOTE ELECTRIC START Comes with 2
• 2000 PSI, 1.8 GPM maximum water flow • Thermal relief valve on pump to protect against overheating • 25’ high pressure hose and inlet hose quick connect coupling • Comes with 8” pneumatic wheels for portability and 4 quick connect nozzles (0°, 25°, 40° and detergent)
$269.99
3 HP
4 stroke air cooled OHV engine
•Low oil shut-off with indicator light protects the engine •Duplex Outlet: 120V/10 amp. AC output •Terminals: 12V, 8 amp. DC output •AC and DC circuit breakers for safe operation
KPW-2001FM
$429.99
$599.99
KCG-1501G
2000 PSI GASOLINE HIGH PRESSURE WASHER
$299.99
NEW
• Sine wave digital inverter generator provides stable current to power voltage-sentitive electronics • DC USB port: 5V/1.5 amp DC output for charging smartphones, tablettes or any USB powered equipment • DC Cigarette Lighter Socket: 12V/8 amp DC output • AC Duplex Outlet: 120V /13.3 amp AC output
• Brushless alternator and electronic ignition • Outlet: 120V/6.7 amp AC output • Outlet: 12V/5.3 amp DC output • AC and DC circuit breakers and reset buttons for safe operation • Comes with DC cables and spark plug
FLAT PVC DISCHARGE HOSES
$49.99
KW-502 2” X 50 ft
$79.99 KW-503 3” X 50 ft
KCG-15LS
15 Ton
• Quick split 8 second cycle time cylinder • Splits logs up to 21” in length • Log cradle keeps logs from dropping to the ground
splitting force
$1049.99
6.5 HP
22 Ton
KCG-22LS
• Quick split 8 second cycle time cylinder • Splits logs up to 24” in length • 2 stage pump • Cross wedge splits logs into four • Log cradle keeps logs from dropping to the ground
4 stroke air cooled OHV engine
splitting force
$1549.
99
6.5 HP
4 stroke air cooled OHV engine
7
AIR COMPRESSORS & accessories ULTRA-QUIET OIL-FREE AIR COMPRESSORS
AIR TOOL KIT
71 PC.
8171 •Comes with 1/2” Impact Wrench, 3/8” Ratchet Wrench, Air Hammer and 1/4” Die Grinder
KC-1620A
•Light weight aluminum tank •3.80 CFM @ 40 PSI •2.35 CFM @ 90 PSI •Extra long pump life of over 3000 hours •120 PSI maximum tank pressure •ASME safety valve
All-Weather Flexibility (-40°C to 65°C) 300 PSI MAXIMUM PRESSURE HYBRID POLYMER INDUSTRIAL AIR HOSES K-2514H K-2538H K-5014H K-5038H K-10014H K-10038H
$99.99
1.6 GALLON
8449N
• Durable oil lubricated pump • 2.76 SCFM @ 40 PSI • 2.30 SCFM @ 90 PSI • Air Pressure Regulator and easy to read Pressure Gauges
2 HP (PEAK) (60 Decibels)
KC-4620A
•Light weight aluminum tanks •3.80 CFM @ 40 PSI •2.35 CFM @ 90 PSI •Extra long pump life of over 3000 hours •120 PSI maximum tank pressure •ASME safety valve
$19.99 $25.99 $29.99 $39.99 $49.99 $59.99
1.5 HP AIR COMPRESSOR COMBO KIT
1.5 HP AIR COMPRESSOR
$199.99
25’x1/4” 25’x3/8” 50’x1/4” 50’x3/8” 100’x1/4” 100’x3/8”
8449N/8200NH25
Kit includes:
•1- 1.5 HP air compressor (8449N) •1- 18 gauge x 2” brad nailer kit (8200B) •1- 3/8” x 25’ air hose 300 PSI (KAH-3825)
ASME Safety Valve
4.6 GALLON (2 X 2.3)
$259.99
$109.99
2 HP (PEAK) (60 Decibels)
$139.99
1.5 HP 2 gallon tank
COMPRESSOR ONLY
COMBO KIT
CORDLESS STAPLER KIT - DRIVES STAPLER KIT - DRIVES ARROW® 21 GA. X 5/8” -1/2” CROWN ARROW® T50® STAPLES T50® STAPLES UPHOLSTERY STAPLER KIT
18GA. X 1” - 1/4” NARROW CROWN STAPLER KIT
16 GA. X 2” - 7/16” MEDIUM CROWN STAPLER KIT
• Drives 3/8” crown x 20 Ga. Arrow® T50® staples from 1/4” - 9/16” and 18 Ga. brad nails from 3/8” - 5/8” • 4.8V, 1.3 Ah Ni-Mh battery pack
• 3/8” to 1” Staple range • Comes with 1/4˝ air inlet, oiler, hex. keys, & sturdy carrying case
• 3/4” to 2” Staple range • Comes with 1/4˝ air inlet, oiler, hex. keys, safety glasses & sturdy carrying case
8150CT
8140S
• 1/4” - 9/16” Staple range • Comes with 1/4˝ air inlet, oiler, hex. keys, & sturdy carrying case
8121S
• 1/4” to 5/8” Staple range • Comes with 1/4˝ air inlet, oiler, hex. keys, & sturdy carrying case
ADJUSTABLE AIR DEFLECTOR
$49.99
8101S
ADJUSTABLE AIR DEFLECTOR
$49.99
ADJUSTABLE AIR DEFLECTOR
$59.99
23GA. X 2” HEADLESS PIN NAILER KIT
18GA. X 2” BRAD NAILER KIT
18 GA. NAILER/ STAPLER KIT 2
• 1/2” to 1-3/8” Pin range • Comes with 1/4” Air inlet, 2 removable non-marring tips, oiler, hex. keys and sturdy carrying case ADJUSTABLE AIR DEFLECTOR
• 1/2” to 2” Pin range • Comes with 1/4” Air inlet, 2 removable non-marring tips, oiler, hex. keys and sturdy carrying case ADJUSTABLE AIR DEFLECTOR
• 3/4” to 2” Nail range • Comes with 1/4˝ air inlet, oiler, hex. keys, safety glasses & sturdy carrying case
• 18 Ga. x 1/4” (3/8” to 1 5/8”) stapler • 18 Ga. x 1/4” (3/4” to 2”) nailer • Comes with 1/4” air inlet, oiler, hex. keys and sturdy carrying case ADJUSTABLE AIR DEFLECTOR
8
$49.99
8251PN
$99.99
8201N
ADJUSTABLE AIR DEFLECTOR
$39.99
ADJUSTABLE AIR DEFLECTOR
$39.99
23GA. X 1 3/8” HEADLESS PIN NAILER KIT 8223PN
8216S
8210NS
$99.99 PALM NAILER
in 1
$59.99
8120P
• Powerful palm nailer drives bulk, framing, timber and finishing nails up to 4-1/2” (120mm) in length • Magnetic nail holder for fast and easy nailing • Comes with oiler and hex. key
$39.99
20 PC. PNEUMATIC ACCESSORY KIT K-1620
SPRAY GUN KITS Separate adjustable fluid and spray pattern knobs for fine detailing or total coverage
8180
$19.99
TIRE INFLATION GUN WITH PRESSURE GAUGE K-1630
8185
8190 HVLP 8195 43 PC. KIT
$29.99 $44.99 $59.99
$69.99
• 15” flexible rubber hose with lever style chuck, rubber protected • 2-1/2” diameter pressure gauge (pressure range of 10- 170 PSI) • Quick connect 1/4” NPT air inlet
$19.99
5 GALLON TWIN TANK AIR COMPRESSOR & BRAD NAILER COMBO KIT
5 GALLON TWIN TANK AIR COMPRESSOR 8488C
•3,400 RPM, 13 Amp. motor • 5.0 CFM @ 40 PSI • 4.0 CFM @ 90 PSI • Dual 1/4” universal “one touch” quick connect couplers allow user to connect up to 2 air tools
8488C/8200NH25
5 PEAK HP AIR COMPRESSOR 8498
• Durable oil lubricated pump • 20 gallon tank • 7.4 SCFM @ 40 PSI • 5.7 SCFM @ 90 PSI • Air Pressure Regulator and easy to read Pressure Gauges
PVC AIR HOSE KITS Kit includes: •300 PSI PVC hose •1/4” Universal One-touch quick coupling •1/4” air inlet
KAH-3825 3/8” x 25’
Kit includes:
•1- 5 gallon air compressor •1- 18 gauge x 2” brad nailer kit (8200B) •1- 3/8” x 25’ air hose 300 PSI (KAH-3825)
$16.99
KAH-3850 3/8” x 50’
NEW
$25.99 COMPRESSOR OIL BOTTLE
$159.99
2.5 HP 5 gallon twin tank
COMPRESSOR ONLY
16GA. X 2 1/2” BRAD NAILER KIT
COIL ROOFING NAILER KIT 8245R
8225N
• 3/4” to 2 1/2” Nail range • Comes with 1/4˝ air inlet, oiler, hex. keys, safety glasses & sturdy carrying case ADJUSTABLE AIR DEFLECTOR
$89.99
• 7/8” to 1 3/4” (11 Ga.) • Comes with 1/4˝ air inlet, debris shield, safety glasses, oiler, hex. keys and sturdy carrying case ADJUSTABLE AIR DEFLECTOR
Kit Includes: • 3/4” to 2 ” Nailer • 3/8” to 1” Stapler • Comes with 1/4” air inlet, oiler, hex. keys and sturdy carrying case
COMBO KIT
• Drives standard 30°-34° PaslodeTM and SencoTM paper collated clipped head nails • Accepts PaslodeTM and SencoTM fuel cells • Powered by 6V 1.8Ah Ni-Mh battery and fuel cell (fuel cell sold separately) • Battery indicator light on nailer
HOT DEAL! HOT DEAL!
$149.
99
$149.
99
$289.99
(850ml)
$7.99 DELUXE NAILER KIT WITH BONUS STAPLER 8293
•28° Clipped head framing nailer •18 ga. x 1” Narrow crown stapler •18 ga. x 2” Brad nailer
$159.99
$59.99
$129.99 •1 ” to 2” Staple range •1 1/2 ” to 2” Cleat nail range • Comes with mallet, 1/4˝ air inlet, safety glasses, oiler, hex. keys & sturdy carrying case
ADJUSTABLE AIR DEFLECTOR
8201N/8101SK
HOT DEAL!
8260FSN-2
2 BATTERY PACKS
COMBO KIT
18 GA. 2” BRAD NAILER / 1” NARROW CROWN STAPLER
2” FLOORING STAPLER/ CLEAT NAILER KIT
30° - 34° CLIPPED HEAD CORDLESS GAS FRAMING HOUR CHARGER NAILER KIT Iplus 8235GFN
$199.
99
KW-077
18GA. BRAD NAILER/STAPLER & FLOORING NAILER/STAPLER KIT
2” FLOORING STAPLER/ CLEAT NAILER KIT
2 in 1
8266FSN-3
•1 1/2” to 2” staple range •1 1/2 ” to 2” ”L” & ”T” cleat nail range • Comes with nylon-fibre glass mallet, 1/4” air inlet, safety glasses, oiler, hex. keys & sturdy carrying case
HOT DEAL!
$179.99
3 in 1
8241FNS
• Standard 18 Ga. brad nails and 18 Ga. 1/4” crown staples • Comes with 1/4” air inlet, oiler, hex. keys & sturdy carrying case
$99.99
4 in 1
9
3/8” VARIABLE SPEED RIGHT ANGLE DRILL
1/4 SHEET PALM SANDER
3” X 24”
•3.5 amp. motor • 0-1600 RPM • Forward/reverse switch • Non-Slip soft grip
8357
$49.99
•Powerful 1.5 Amp. motor operates at 14,000 opm •Comes with 60, 100 grit sandpaper, rear vacuum port, detachable dust bag and sandpaper punch plate
3/8” ELECTRIC DRILL
1/3 SHEET PALM SANDER
POWER TOOLS
8310ADN
BELT SANDER • 10 amp. motor • Belt speed 1300 FPM • Comes with sanding belt and dust bag
3”x 24” SANDING BELT KITS Model Belt Size Grit Units/Kits Price SB-324-40 3”x24” 40 1 $1.99 SB-324-60 3”x24” 60 1 $1.99 SB-324-80 3”x24” 80 1 $1.99 SB-324-120 3”x24” 120 1 $1.99
$129.
99
135 PC VARIABLE SPEED ROTARY TOOL KIT 8353N
$29.99
180 PC. ROTARY TOOL ACCESSORY KIT
8302N
• Powerful 1.6 Amp. motor operates at 24,000 opm • Comes with 12 pieces of abrasives, dust port adaptor and sandpaper punch plate
$29.99
DETAIL PALM SANDER
3/8” ELECTRIC DRILL
$16.99
HIGH FREQUENCY OSCILLATING MULTI-TOOL KITS & accessories 30 PC
• High frequency oscillating action without kickback • Each kit includes a sanding back-up pad with hook and loop backing, 24 sanding papers (60, 80 and 120 grit) with hook and loop backing, 35mm Tru-cut narrow offset saw blade, 52mm rigid offset
• 1.2 amp motor • Comes with 12 pieces of abrasives (4 x 80 grit, 4 x 120 grit, 4 x 180 grit) and dust port adaptor
• 5 amp. motor • 3/8” Keyless chuck • Forward/reverse switch • Non-Slip soft grip
9 PC. SANDING PAPER KIT 99 KW-168
$6.
$39.99 DUAL TEMPERATURE HEAT GUN
8305
•1.5 amp motor •Comes complete with 9 PC. accessories & sturdy carrying case
8300N
5” DISC HOOP AND LOOP SANDING PAPER KIT 99 KW-067
$19.99 $49.
99
KW-4801
$12.99
KW-4802
$12.99
KW-4808 KW-4810
$6.99
$6.99
KW-4816
KW-4817
$6.99
10
$6.99
8349LVS (12V Lithium-ion)
$49.
99
KW-4803
$17.99
KW-4811
$6.99
KW-4818
$11.99
K-012LBT Fits: 8349LVS
KW-4804
$17.99
KW-4812
$6.99
KW-4819
$6.99
KW-4805
$17.99
KW-4813
$6.99
KW-4820
$11.99
$27.99
KW-4806
$11.99
KW-4815
$6.99
NEW
KW-4821
$11.99
$29.99
$6.
1/2” DRILLING &
12V Lithium-ion Battery
$29.99
5” RANDOM ORBIT SANDER
• Powerful 1,500 watt motor • Comes complete with heat gun, 4 nozzles, 5pc. paint scraper kit
8348VS (120V)
$29.99
8303N
8304N
KW-145
$19.99
8352
• 3.3 amp. motor • 3/8” Keyless chuck • Forward/reverse switch • Non-Slip soft grip
1.1 amp. motor
• 8,000 - 30,000 RPM • Comes with 40” Flex Shaft, 135 PC. assorted accessories & adjustable stand
8351
MIXING KIT
12V LI-ION CORDLESS DRILL KIT 8010L
8316N
• 0 - 600 RPM - 9 amp. motor • Forward/reverse switch NEW & IMPROVED • Variable speed trigger Mixing Paddles with with lock-on button Reduced 10mm • Double gear reduction Hex Shanks for added torque • Rear D-handle rotates 360° • Comes with 1/2” chuck, 3 galvanized mixing paddles (10mm hex. shank), wrench and sturdy carrying case
$99.99
• 12V, 1300 m-Ah Li-ion battery provides longer run time • 3/8” “Jacobs” keyless chuck • Built-in high output LED light • Comes with 1 Li-ion battery, 6 drill bits, 6 screwdriver bits, bit extension and sturdy carrying case
Replacement
Li-ion Battery
K-8012LBT Fits: 8010L & 8012L
$27.99
YOURCHOICE
$59. 99
12V LI-ION CORDLESS IMPACT DRIVER KIT 8012L
• Powerful 710 in/lbs of driving force • 12V, 1300 m-Ah Li-ion battery provides longer run time • Built-in high output LED light • Comes with 1 Li-ion battery, 4 nut drivers with 1/4” hex. shank (6, 8, 10 & 12mm), 2 screwdriver bits (Robertson #1, #2), 1/4” socket adaptor and sturdy carrying case
12 PC. 4 1/2” ANGLE GRINDER & MULTI-PURPOSE DISC KIT 8208AG
3-IN-1 VARIABLE SPEED
BLOWER/VACUUM/MULCHER 8500BVM
12 pc. kit includes 4-1/2” angle grinder, 2 grinding wheels (1/8” & 1/4”), 5 sanding discs
$29.99
5” ANGLE DISC GRINDER KIT 8364
• 8 amp. motor • 11,000 RPM
• Blower function provides 180 to 320 Km/h of air speed • Vacuum function provides 110 to 350 CFM of air volume • 16 to 1 mulch ratio mulches 16 bags of leaves into1 bag of mulched leaves • 5” vacuum/mulcher collection tubes • Comes with blower attachment, vacuum/mulching attachments, washable leaf collection bag and adjustable shoulder strap
$59.99
6 PC.
7”
• Variable speed dial (1,000 - 3,000 RPM) • Comes with 7” polishing backing pad, wool bonnet, 7” sanding hook-and loop backing pad, 7” hook-and loop 80 grit sanding paper and wrench
REPLACEMENT 7” SANDING PAPER KIT 99
$49.99
KW-111
1/4” LAMINATE TRIMMER 8362N
• 3 Amp., 110 V, 26,000 RPM no load speed • Comes complete with 1/4” collet cone, 1/4” x 3/8” straight bit, straight edge guide, trimmer base and roller guide, #10 and #17 open end wrenches
$49.99
8311
•4.4 amp. motor •16,000 cuts per minute for fast surface planing set of planer knives, socket wrench & sturdy carrying case
•7 amp. motor •Impacts 2700 BPM •Maximum Torque 230 /ft.-lbs •Comes with 4 sockets 11/16”, 3/4”, 13/16”, and 7/8”
$79.99
$99.99
“DOUBLE CUT”
SAW KITS
• Cuts hard and soft metals, hardwood, PVC, Iron, plastics, aluminum, copper, stainless steel with ease and precision • Kit includes set of universal tungsten carbide tipped (TCT) blades, 10 pcs. lubricating wax sticks, control handle, arbor tool and Powerful sturdy carrying case 4.5 amp. motor
3”
• Cuts hard and soft metals, hardwood, PVC, Iron, plastics, aluminum, copper, stainless steel with ease and precision • Kit includes set of universal tungsten carbide tipped Powerful (TCT) blades, 10 pcs. lubricating wax sticks, control 7.5 amp. motor handle, arbor tool and sturdy carrying case
5”
$119.99
CS650 • Cuts hard and soft metals, hardwood, PVC, Iron, plastics, aluminum, copper, stainless steel with ease and precision • Kit includes set of universal tungsten carbide tipped (TCT) blades, 10 pcs. lubricating wax sticks, control handle, arbor tool and sturdy carrying case
$199.99
REPLACEMENT WOOL BONNET KM-090
$49.99
6 1/4” Powerful 13 amp. motor
$14.99
REPLACEMENT APPLICATOR & BUFFING BONNETS KIT
• Ball Bearing construction • 10” Tapered foam applicator pad
KM-030
$7.99
$39.99
PORTABLE VARIABLE SPEED BANDSAW 8376
• Quickly cuts round or square stock up to 4-1/2” • Needle bearing mounted spindle and triple ball bearing blade • Comes with 14 TPI blade, guide bar, square, hex. key and extra set of carbon brushes
$119.99
BI-METAL BLADES (”SKIP TOOTH”) Model Length Width TPI Thickness Price KBB-8376-BM-1014 44 7/8” 1/2” 10-14 .020” $15.99 KBB-8376-BM-1418 44 7/8” 1/2” 14-18 .020” $15.99
CS300
$99.99
$99.99
8301
Laser Effect
• 6.5 amp. motor • Tool-less quick release blade change system • Comes with jig saw blades, edge guide, dust chute, hex. keys and sturdy carrying case
1/2” IMPACT WRENCH
8333
$7.
Powerful 11 amp. motor
VARIABLE SPEED ORBITAL JIG SAW 10” RANDOM ORBIT POLISHER WITH LASER Enhanced 8329
3 1/4” PLANER
KC-9125
POLISHER/SANDER KIT
8369N
3 1/4 HP VARIABLE SPEED Powerful PLUNGE ROUTER 8367
15 amp. motor
• Plunge Depth Capacity 0 to 2-3/8” • Variable Speeds 9,000 - 22,000 RPM • Comes with 1/4” & 3/8” collet sleeves, 1/2” collet cone, 1/2” straight router bit, edge guide, edge guide holder, trim guide, chip deflector, template guide, wrench, depth stop wrench and carrying case
$99.99
15PC. ANTI-KICKBACK CARBIDE ROUTER BIT SETS K-1514 1/4” SHANK K-1512 99 ea. 1/2” SHANK
$39.
11 11
www.kingcanada.com 6500W GASOLINE GENERATOR WITH WHEEL KIT
NEW
KCG-6501G
• AVR system and electronic ignition • Low oil shut-off with indicator light protects the engine • Duplex outlet: 120V/20 Amp AC • Twist lock outlet: 120V/240V/30 Amp AC • AC double throw circuit breaker and resets for safe operation
8199
Designed with noise reducing turbine. HVLP high volume - low pressure Includes 3 brass nozzles (1.5mm, 1.8mm & 2.5MM) and viscosity measuring cup
stroke air 15 HP 4cooled OHV engine
$599.99
NEW
KCG-8500GE
• AVR system and electronic ignition • Low oil shut-off with indicator light protects the engine • Two duplex outlets: 120V/20 Amp AC • Two twist lock outlets: 120V/30 Amp and 120V/240V/30 Amp AC • Keyed electric start and easy start recoil starter • AC double throw circuit breaker and resets for safe operation • Wheel kit includes 10” wheels and pivot handles
$799.
99
8356VS
45 MINUTE quick battery charger
1/2” keyless
Universal 1/4”
$99.99
$119.99
COMBO KIT
8022L
female hex.
3 1/2” MINI PLUNGE SAW KIT
8335L
• Compact hand held plunge saw can cut wood, plastic, ceramic tile, aluminum and even sheet metal • Make plunge cuts up to 1-1/8” • Worm-drive power transmission system for greater cutting power • Comes complete with 3 blade set (24 tooth carbide tipped blade, segmented diamond blade and 80 tooth HSS blade), dust extraction hose, edge guide and blade changing hex. key
$89.
99
KC-5005R
HOT DEAL!
INCLUDED 10” x 40 tooth Carbide blade
TELESCOPING MAGNETIC LED FLASHLIGHT
• 3 bright white LEDs • Extends up to 15” • LR44 battery included
$49.99
10” TABLE SAW
8020L/ 8022LK
$159.99
• Two 20V MAX, 1300 m-Ah Lithium-ion batteries provide longer run time • Built-in high output LED light illuminates work surface for increased visibility • Comes with 6 drill bits, bit extension, 6 screwdriver bits and 4 nut drivers with 1/4” hex. shank for #8022L only, sturdy carrying case
Kit comes in sturdy carrying case
3”x 21” SANDING BELT KITS Model Belt Size Grit Units/Kit Price SB-321-40 3”x 21” 40 1 $1.99 SB-321-60 3”x 21” 60 1 $1.99 SB-321-80 3”x 21” 80 1 $1.99 SB-321-120 3”x 21” 120 1 $1.99
4 stroke air cooled OHV engine
IMPACT KIT
7.2 amp. motor
• Belt speed 390-1250 FPM • Highly efficient dust collection system • Comes with sanding belt and dust bag
DRILL KIT
$59.99
3” X 21” VARIABLE SPEED BELT SANDER Powerful
CORDLESS POWER TOOL KITS
• Variable speed 800-3000 SPM • Tool-less blade clamp system • Accepts standard 1/2” shank blades (1.5 mm) Comes with A wood cutting blade, 1 metal cutting blade
15 HP
metal chuck
7 amp. motor
8354
8020L
$69.99
VARIABLE SPEED RECIPROCATING SAW Powerful KIT
8500W GASOLINE GENERATOR WITH ELECTRIC START & WHEEL KIT
ELECTRIC HVLP SPRAY GUN
• Powerful 15 amp, 4,800 RPM ball bearing motor • Blade tilts 0° to 45° for versatile angle cutting • 26” x 19” heavy-duty cast aluminum table • Comes with rip fence, miter gauge, push stick and wrenches
KSC-1040T
$139.99
Stand Included
20V MAX CLIPPED HEAD FRAMING LITHIUM-ION NAILER KITS ADJUSTABLE AIR DEFLECTOR LED RECHARGEABLE FLASHLIGHT
KMAG-3LED-S (silver) K-022LF KMAG-3LED-B (black)
KW-3501 Replacement TCT blade
$11.99
KW-3502 Replacement diamond blade
$19.
99
$11.
99
KW-3503 Replacement HSS blade
$11.99
$13.99
28°-30° 34° 8228N
•Shoots standard 2 3/16” - 3 9/16”
8234N
HOT DEAL!
•Shoots standard 2 3/16” - 3 9/16”
$99.99ea.
We reserve the right to limit quantities. We reserve the right to correct any typographical and pictorial errors without notice. Articles may vary from illustration shown. 2 years warranty on Some retailers may not stock all products due to space restrictions and product availability. King Power Tools.