VEGETATIVE ROOFING COMPONENTS EDGE RESTRAINTS
Series #
3900 HG 3910 - R HG 3920 - E HG 3930 - S HG 3940 - I HG 3980 - S
-I
HDPE E A A A A
E .E E
E
Hanging Gardens provides the most rigid & durable aluminum & fully recycled HDPE edge / transition treatments in the marketplace. This is attained through our double or quadruple chamfer method to ensure rigidity. The design of the product also maximizes water movement to allow it to ow equally & uniformly. This technology prevents overly moist media conditions around the perimeter or in transition areas of the roof, thus preventing anaerobic growing conditions.
H HG 3900 05/18
G www.hanging-gardens.com
Page 1 of 1
VEGETATIVE ROOFING COMPONENTS EDGE RESTRAINTS Recycled HDPE Edge
Our Recycled HDPE Edge is designed as a definite boundary between gravel / paver and growth media that allows the flow of water but not of the substrate. Specific to this product, it: is less expensive, more dimensionally stable and versatile than aluminum incorporates a hinge & click connection that allows for the formation of 90o inside and outside corners; no need for prefabricated corners accomodates the installation of tight radii or long curved lines by interconnecting short edge profiles is recommended that longer spans be reinforced with longitudinal connectors, providing added rigidity to the system at regular intervals along the span integrates with all of our drainage & drainage / retention products Tiered pricing based on product quantity
LEED Credits available for: • Materials & Resources (MR)
20 units per box (Profile Edges) 15 units per box (Radius / Corner) 20 units per box (Connectors)
TECHNICAL DATA System Type: • Monolithic / Contiguous / Modular
Vegetated Roofing Use: • Extensive vegetated roofs
Materials:
Installation Requirements: • Place edge profiles on top of protective fleece, with foot of restraint toward vegetative portion of roof • Connect edge profiles by interlocking the hinge connectors and engaging the click-clasps • Install a connector every 10 profile lengths • Connect all components as shown on edging plan
• UV Stabilized Recycled HDPE Material Wall Thickness: • 1/8” nominal Color: • Black Roof / Deck Slope Constraint: • Up to 5o slope or 1:12 roof pitch Water Permeability: • 1.47 in2 / LF HG 3910 05/18
www.hanging-gardens.com
Page 1 of 2
Product #
3910
HG 3910.0301 Thin Profile Edge: Dimensions (H x W x L): 3 1/8” x 4 1/4” x 43 1/4” Weight: 0.39 lbs. / LF
HG 3910.0302 Thin Profile Connector: Dimensions (H x W x L): 3 1/4” x 4 3/8” x 7 7/8” Weight: 0.34 lbs. / LF
HG 3910.0501 Standard Profile Edge: Dimensions (H x W x L): 4 3/4” x 4 1/4” x 43 1/4” Weight: 0.49 lbs. / LF
HG 3910.0502 Standard Profile Connector: Dimensions (H x W x L): 4 7/8” x 4 3/8” x 7 7/8” Weight: 0.41 lbs. / LF
*Short Profile Edges are available in 11 3/4” lengths for tight radii or long curved lines.
HG 3910 05/18
www.hanging-gardens.com
Page 2 of 2
VEGETATIVE ROOFING COMPONENTS EDGE RESTRAINTS Extensive Aluminum Edge
Our Extensive Aluminum Edge is designed as a definite boundary between gravel / paver and growth media that allows the flow of water but not of the substrate. Specific to this product, it: partners with our 1” Drainage/Retention Board; the edging slots align directly with the height of the board to ensure an unrestricted flow of excess stormwater utilizes a “smooth slide” design to make secure, invisible connections has pre-fabricated inside and outside corners for ease of installation prevents overly moist media conditions around the perimeter or in transition areas of the roof thus preventing anaerobic growing conditions
Tiered pricing based on product quantity
8 LF per Female Profile 1 LF per Connectors & Corners 50 Profiles & Corners per Pallet
TECHNICAL DATA System Type: • Monolithic / Contiguous / Modular
Vegetated Roofing Use: • Extensive vegetated roofs
Materials:
Installation Requirements: • Lay edge profile sections end to end on top of protective fleece, with foot of restraint toward vegetative portion of roof • Slide Male Connectors into Female Profiles • Connect all components as shown on edging plan
• 5052-H32 Aluminum Material Thickness: • 14 GA Material Finish: • Mill (natural aluminum) Roof / Deck Slope Constraint: • Up to 5o slope or 1:12 roof pitch Water Permeability: • Dependent on drainage/retention board chosen HG 3920 05/18
www.hanging-gardens.com
Page 1 of 2
Product #
3920
HG 3920.0401 Female Profile: Dimensions (H x W x L): 6” x 4” x 96” Weight: 0.88 lbs. / LF * Utilized as either a 4” or 6” height * Un-slotted Female Profile also available
HG 3920.0402 Male Connector: Dimensions (H x W x L): 5.675” x 3.675” x 12” Weight: 0.68 lbs. / LF * Utilized as either a 4” or 6” height
HG 3920.0690 Male 6” 90o Corner: Dimensions (H x W x L): 5.675” x 3.675” x 12” (each side) Weight: 0.68 lbs. / LF
HG 3920.0627 Male 6” 270o Corner: Dimensions (H x W x L): 5.675” x 3.675” x 12” (each side) Weight: 0.68 lbs. / LF
*4” 90o Corner & 4” 270o Corner not shown.
HG 3920 05/18
www.hanging-gardens.com
Page 2 of 2
VEGETATIVE ROOFING COMPONENTS EDGE RESTRAINTS
Semi-Intensive Aluminum Edge
Our Semi-Intensive Aluminum Edge is designed as a definite boundary between gravel / paver and growth media that allows the flow of water but not of the substrate. Specific to this product, it: partners with our 1.6” Drainage/Retention Board; the edging slots align directly with the height of the board to ensure an unrestricted flow of excess stormwater utilizes a “smooth slide” design to make secure, invisible connections has pre-fabricated inside and outside corners for ease of installation prevents overly moist media conditions around the perimeter or in transition areas of the roof thus preventing anaerobic growing conditions
Tiered pricing based on product quantity
8 LF per Female Profile 1 LF per Connectors & Corners 50 Profiles & Corners per Pallet
TECHNICAL DATA System Type: • Monolithic / Contiguous / Modular
Vegetated Roofing Use: • Semi-Intensive vegetated roofs
Materials:
Installation Requirements: • Lay edge profile sections end to end on top of protective fleece, with foot of restraint toward vegetative portion of roof • Slide Male Connectors into Female Profiles • Connect all components as shown on edging plan
• 5052-H32 Aluminum Material Thickness: • 12 GA Material Finish: • Mill (natural aluminum) Roof / Deck Slope Constraint: • Up to 5o slope or 1:12 roof pitch Water Permeability: • Dependent on drainage/retention board chosen HG 3930 05/18
www.hanging-gardens.com
Page 1 of 2
Product #
3930
HG 3930.0901 Female Profile: Dimensions (H x W x L): 9” x 6” x 96” Weight: 1.58 lbs. / LF * Un-slotted Female Profile also available
HG 3930.0902 Male Connector: Dimensions (H x W x L): 8.675” x 5.675” x 12” Weight: 1.33 lbs. / LF
HG 3930.0990 Male 90o Corner: Dimensions (H x W x L): 8.675” x 5.675” x 12” (each side) Weight: 1.33 lbs. / LF
HG 3930 05/18
HG 3930.0927 Male 270o Corner: Dimensions (H x W x L): 8.675” x 5.675” x 12” (each side) Weight: 1.33 lbs. / LF
www.hanging-gardens.com
Page 2 of 2
VEGETATIVE ROOFING COMPONENTS EDGE RESTRAINTS Intensive Aluminum Edge
Our Intensive Aluminum Edge is designed as a definite boundary between gravel / paver and growth media that allows the flow of water but not of the substrate. Specific to this product, it: partners with our Drainage/Retention Boards; the edging slots align directly with the height of the board to ensure an unrestricted flow of excess stormwater utilizes a “smooth slide” design to make secure, invisible connections has pre-fabricated inside and outside corners for ease of installation prevents overly moist media conditions around the perimeter or in transition areas of the roof thus preventing anaerobic growing conditions
Tiered pricing based on product quantity
8 LF per Female Profile 1 LF per Connectors & Corners 50 Profiles & Corners per Pallet
TECHNICAL DATA System Type: • Monolithic / Contiguous / Modular
Vegetated Roofing Use: • Intensive vegetated roofs
Materials:
Installation Requirements: • Lay edge profile sections end to end on top of protective fleece, with foot of restraint toward vegetative portion of roof • Slide Male Connectors into Female Profiles • Connect all components as shown on edging plan
• 5052-H32 Aluminum Material Thickness: • 12 GA Material Finish: • Mill (natural aluminum) Roof / Deck Slope Constraint: • Up to 5o slope or 1:12 roof pitch Water Permeability: • Dependent on drainage/retention board chosen HG 3940 05/18
www.hanging-gardens.com
Page 1 of 2
Product #
3940
HG 3940.1201 Female Profile: Dimensions (H x W x L): 12” x 6” x 96” Weight: 1.86 lbs. / LF * Un-slotted Female Profile also available
HG 3940.1202 Male Connector: Dimensions (H x W x L): 11.675” x 5.675” x 12” Weight: 1.61 lbs. / LF
HG 3940.1290 Male 90o Corner: Dimensions (H x W x L): 11.675” x 5.675” x 12” (each side) Weight: 1.61 lbs. / LF
HG 3940 05/18
HG 3940.1227 Male 270o Corner: Dimensions (H x W x L): 11.675” x 5.675” x 12” (each side) Weight: 1.61 lbs. / LF
www.hanging-gardens.com
Page 2 of 2
VEGETATIVE ROOFING COMPONENTS EDGE RESTRAINTS Structural Aluminum Edge
Our Structural Aluminum Edge is designed as a definite boundary between gravel / paver and growth media, providing the structural stability for heavy traffic and wear that highly accessible intensive green roofs or roof gardens encounter. Specific to this product, it: is structurally stabilized with L-support gusset plates, reinforcing the vertical wall at regular intervals dependent on the height of the edge utilizes a “smooth slide” design to make secure, invisible connections has pre-fabricated inside and outside corners for ease of installation is water retardant & weather resistant, applicable with o o temperatures between -58 F up to 176 F is lightweight combined with high stiffness and dimensional stability has a black polyethylene core that offers UV protection, material stability, and long term application outdoors
Tiered pricing based on product quantity
Configuration of packaging is dependent on the size of the order. Bulk pallets of materials are available for larger jobs.
TECHNICAL DATA System Type: • Monolithic / Contiguous / Modular Materials: • 0.3 mm Aluminum surface layers (both sides) • Polyethylene core
Installation Requirements: • Lay edge profile sections end to end on top of drainage mat, with foot of restraint toward vegetative portion of roof • Slide Male Connectors into Female Profiles • Connect all components as shown on edging plan
Material Thickness: • 3 mm Roof / Deck Slope Constraint: • Up to 5o slope or 1:12 roof pitch Vegetated Roofing Use: • High traffic intensive vegetated roofs / plaza decks
HG 3980 05/18
www.hanging-gardens.com
Page 1 of 2
Product #
HG 3980.1801 18” Female Profile: Dimensions (H x W x L): 18” x 16” x 48” Weight: 2.41 lbs. / LF
3980
HG 3980.1802 18” Male Connector: Dimensions (H x W x L): 17.70” x 11.82” x 30” Weight: 2.97 lbs. / LF
HG 3980.1803 18” Male Corner: Dimensions (H x W x L): 17.70” x 12” x 12” Weight: 2.23 lbs. / LF
Material Finishes:
Mill (natural aluminum)
Dark Green
Brushed Stainless
Brushed Bronze
Marine Blue
Hunter Red
Dark Bronze
Black
Caution Yellow
*Structural Aluminum Edge profiles are also available in 12” & 24” heights.
HG 3980 05/18
www.hanging-gardens.com
Page 2 of 2