Upper West Side Town House by hannahchiaroniclarke

PROPOSED PLUMBING DIAGRAM

303 W. 87TH STREET - TOWNHOUSE

408 BATHROOM 3

PLOT PLAN

N.T.S.

303 W 87TH STREET BOROUGH : BLOCK NUMBER : OCCUPANCY GROUP: LOT NUMBER : MAP: ZONE: CONSTRUCTION CLASS NUMBER OF STORIES

1 1-2"

MANHATTAN 1249 RES 28 5D R8 11B 4

NEW FIXTURE AT 1 RELOCATED1-2" ROUGH-IN NEW FIXTURES AT RELOCATED ROUGH-INS

1 1-2"

LAV

303 WEST 87 STREET

401 TERRACE

NEW FIXTURE AT NEW ROUGH-IN

WASHER

Project No.: 13007

NEW FIXTURE AT EXISTING ROUGH-IN

ROOF

NEW FIXTURE AT NEW ROUGH-IN

TUB

STORM WATER

4" 1 1-2"

HOSE BIB

402 BEDROOM 2

1 1-2"

3 4"

4TH FLOOR CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

PROJECT DIRECTORY ARCHITECT

EXPEDITER

NORTH

GENERAL CONTRACTOR

DHD LLC 200 PARK AVENUE SOUTH, #1518 NEW YORK, NY 10003 PHONE: 212.477.7700 FAX: 212.477.0149 EMAIL: ben@davidhowell.net

CODE INC. 40 WORTH STREET, SUITE 800 NEW YORK, NY 10013 PHONE: 212.766.8100

1 1-2"

LAV

NEW FIXTURE AT RELOCATED ROUGH-IN

1 1-2"

NEW FIXTURE AT RELOCATED 1 ROUGH-IN 1-2"

RES

LOT:

BLOCK:

1249

TUB 4"

1 1-2"

ZONE:

MAP:

CONSTRUCTION CLASS:

11B

NUMBER OF STORIES:

19 '

AREA OF WORK

PROGRESS INSPECTIONS: TR1'S :

NEW FIXTURES AT RELOCATED ROUGH-IN

10 0'0"

SOUND BATT INSULATION

15 8" METAL STUDS @ 16" O.C. WITH 5 8" TYPE "X" GYP. BD. MTD. VERTICALLY ONE SIDE - SPACING & GAUGE PER LOCAL CODES

1 "x4" 2

SCHEDULED APPLIED BASE

(NOMINAL) FLUSH PAINT GRADE HARDWOOD BASE MOLDING (BOTH SIDES) WITH FINISH AS SCHEDULED

SCHEDULED APPLIED BASE

LINE OF FINISH FLOOR

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

LINE OF FINISH FLOOR

CLOSET SIDE

4 7/8"

PARTITION TYPE 'A' SCALE: N.T.S.

BATHROOM SIDE

SEE PLAN

BATHROOM SIDE

SEE PLAN

PARTITION TYPE 'B' SCALE: N.T.S.

PARTITION TYPE 'C'

SCALE: N.T.S.

EXISTING FIXTURES AT EXISTING ROUGH-IN

SEE PLAN

PARTITION TYPE 'D' SCALE: N.T.S.

1 1-2"

PARTITION TYPE 'E'

1 1-2"

NEW FIXTURE ON RELOCATED ROUGH

101 REAR YARD GAS LINE FOR BBQ

NEW FIXTURE ON NEW ROUGH

NEW PLUMBING LINES FROM RELOCATED FIXTURES BACK TO EXISTING STACK

BASEMENT 007 LAUNDRY

H EXISTING FIXTURE AT EXISTING ROUGH--IN EXISTING FIXTURE AT EXISTING ROUGH--IN

GAS DRYER

1 1-2"

LAV

TUB

2" 4"

4" CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

GAS RANGE

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

1 1-2"

006 BATHROOM 1

J 2"

SINK

SCALE: N.T.S.

203 KITCHEN

F 1"

NEW FIXTURE AT NEW ROUGH-IN

NEW PLUMBING LINES FROM RELOCATED FIXTURE BACK TO EXISTING STACK

WASHER

203 KITCHEN

3 4"

007 LAUNDRY 01 1 1-2"

CAP AND REMOVE EXISTING GAS FIREPLACE

NEW PLUMBING LINES FROM NEW FIXTURE BACK TO EXISTING STACK

LINE OF FINISH FLOOR LINE OF FINISH FLOOR

HOSE BIB

DRAIN

1ST FLOOR

EXISTING PLUMBING LINES TO EXISTING STACK

1 1-2"

REPLACE FIXTURE ON EXISTING ROUGH

1 1-2"

CELLAR

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

CELLAR

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.

ALL WORK SHALL CONFORM TO THE REQUIREMENTS OF THE NEW YORK CITY BUILDING CODE, FIRE DEPARTMENT RULES AND REGULATIONS, UTILITY COMPANY REQUIREMENTS, AND THE BEST TRADE PRACTICES BEFORE COMMENCING WORK, THE CONTRACTOR SHALL FILE ALL REQUIRED INSURANCE CERTIFICATES WITH THE DEPARTMENT OF BUILDINGS, OBTAIN ALL REQUIRED PERMITS, AND PAY ALL FEES REQUIRED BY THE GOVERNING NEW YORK CITY AGENCIES MINOR DETAILS NOT USUALLY SHOWN OR SPECIFIED, BUT REQUIRED FOR PROPER CONSTRUCTION OF ANY PART OF THE WORK SHALL BE INCLUDED AS IF THEY WERE INDICATED IN THE DRAWINGS THE CONTRACTOR SHALL COORDINATE ALL WORK PROCEDURES WITH THE STIPULATIONS OF LOCAL AUTHORITIES, BUILDING MANAGEMENT OR BOARD OF DIRECTORS THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE PROTECTION OF ALL CONDITIONS AND MATERIALS WITHIN THE PROPOSED CONSTRUCTION AREA. THE CONTRACTOR SHALL DESIGN AND INSTALL ADEQUATE SHORING AND BRACING FOR ALL STRUCTURAL OR REMOVAL TASKS. THE CONTRACTOR SHALL HAVE SOLE RESPONSIBILITY FOR ANY DAMAGE OR INJURIES CAUSED BY OR DURING THE EXECUTION OF WORK.. THE CONTRACTOR SHALL LAYOUT HIS OWN WORK AND SHALL PROVIDE ALL DIMENSIONS REQUIRED FOR OTHER TRADES: PLUMBING ELECTRICALS ETC. PLUMBING WORK SHALL BE PERFORMED BY PERSONS LICENSED IN THEIR TRADES, WHO SHALL ARRANGE FOR AND OBTAIN THROUGH THE DEPARTMENT OF BUILDINGS ALL THE REQUIRED PERMITS, INSPECTIONS AND REQUIRED SIGN OFFS. ELECTRICAL WORK SHALL BE PERFORMED BY PERSONS LICENSED IN THEIR TRADES, WHO SHALL ARRANGE FOR AND OBTAIN THROUGH THE BUREAU OF ELECTRICAL CONTROL ALL REQUIRED PERMITS, INSPECTIONS AN REQUIRED SIGN OFFS. THE CONTRACTOR SHALL DO ALL CUTTING, PATCHING, REPAIRING AS REQUIRED TO PERFORM ALL OF THE WORK INDICATED ON THE DRAWINGS, AND ALL OTHER WORK THAT MAY BE REQUIRED TO COMPLETE THE JOB. ALL PIPING AND WIRING SHALL BE REMOVED TO A POINT OF CONCEALMENT AND SHALL BE PROPERLY CAPPED OR PLUGGED. SEE SCHEDULE SHEET FOR LEGEND AND DOOR SCHEDULE AND DOOR TYPES. FOR ALL STRUCTURAL WORK REFER TO STRUCTURAL DRAWINGS. CONTRACTOR SHALL NOTIFY ARCHITECT IMMEDIATELY OF ANY INCONSISTENCIES OR DISCREPANCIES WITH PLANS IN RELATION TO EXISTING FIELD CONDITIONS. SEE FIELD VERIFICATION NOTES THIS SHEET. CONSULTANTS DRAWINGS ARE SUPPLEMENTAL TO THE ARCHITECTURAL DRAWINGS. IT IS THE RESPONSIBILITY OF THE GENERAL CONTRACTOR TO CROSS CHECK WITH ARCHITECTURAL DRAWINGS PRIOR TO THE ORDERING & INSTALLATION OF ANY MECHANICAL, PLUMBING, AND ELECTRICAL WORK. ANY DISCREPANCIES BETWEEN THE ARCHITECTURAL AND THE CONSULTING ENGINEERS' DRAWINGS SHALL BE BROUGHT TO THE ARCHITECT'S ATTENTION FOR IMMEDIATE CLARIFICATION. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALE ON THE CONSTRUCTION DOCUMENTS. DO NOT SCALE DRAWING DIRECTLY. DIMENSIONS ARE FROM THE FACE OF FINISHED WALL TO FACE OF FINISHED WALL UNLESS NOTED OTHERWISE ON PLANS. ALL BE APPLIED, INSTALLED, CONNECTED, ERECTED, USED, CLEANED, AND CONDITIONED IN ACCORDANCE WITH THE MANUFACTURE'S' WRITTEN SPECIFICATIONS OR INSTRUCTIONS. THE GENERAL CONTRACTOR SHALL PERSONALLY SUPERVISE AND DIRECT THE WORK. THE GENERAL CONTRACTOR IS RESPONSIBLE FOR ALL CONSTRUCTION AND / OR INSTALLATION METHODS, MEANS, TECHNIQUES, SEQUENCES AND PROCEDURES AND FOR COORDINATION OF ALL PORTIONS OF THE WORK. CUTTING AND PATCHING: WHERE EXISTING CONDITIONS ARE CUT OR DISTURBED TO PERMIT INSTALLATION OF NEW WORK, MATCH AND PATCH EXISTING DISTURBED CONSTRUCTION AND FINISHES. ALL CONSTRUCTION SHALL COMPLY WITH ALL APPLICABLE CODES AND ORDINANCES IN PLACE AND IN THE LOCATION OF THE WORK. ALL WORK SHALL BE EXECUTED IN A MANNER ACCEPTABLE TO THE OWNER/ARCHITECT. PHASED WORK THAT ALLOWS OTHER PARTS OF THE BUILDING TO REMAIN IN OPERATION DURING CONSTRUCTION IS TO BE COORDINATED BY THE GENERAL CONTRACTOR DIRECTLY WITH THE OWNER/ARCHITECT. THE GENERAL CONTRACTOR SHALL PAY ALL FEES, LICENSES, PERMITS, AND INSPECTIONS REQUIRED FOR PROPER EXECUTION OF THE WORK. UNLESS NOTED OTHERWISE, THE GENERAL CONTRACTOR SHALL PROVIDE AND PAY ALL LABOR MATERIAL, EQUIPMENT, TOOLS, CONSTRUCTION EQUIPMENT, MACHINERY, TRANSPORTATION, PERMITS AND OTHER SERVICES AND FACILITIES NECESSARY FOR PROPER AND TIMELY EXECUTION OF THE WORK. GENERAL CONTRACTOR SHALL GUARANTEE ALL WORKMANSHIP AND MATERIALS FOR A PERIOD OF ONE YEAR FROM THE DATE OF WRITTEN SUBSTANTIAL COMPLETION WHICH SHALL BE SUBMITTED TO THE ARCHITECT BEFORE FINAL PAYMENT. THE GENERAL CONTRACTOR WARRANTS TO THE OWNER AND TO THE ARCHITECT THAT ALL MATERIALS AND EQUIPMENT FURNISHED UNDER THE CONTRACT ARE NEW UNLESS OTHERWISE SPECIFIED AND THAT ALL WORK WILL BE AS SPECIFIED AND FREE OF DEFECTS. CONTRACTOR AND HIS SUB-CONTRACTOR SHALL OBSERVE ALL RULES AND REGULATIONS OF THE BUILDING, THEY ARE TO MAINTAIN A PROFESSIONAL DEMEANOR AT THE JOB SITE. (NO LOUD MUSIC OR DRINKING AND RESPECT TO OTHERS). CONTRACTOR AND ALL SUBCONTRACTORS TO SUBMIT FINAL RELEASE LIENS TO THE BOARD AND MANAGEMENT FOR RECORD ONCE PROJECT IS SUBSTANTIALLY COMPLETE. CONTRACTOR SHALL REQUEST APPROVAL FROM THE BUILDING MANAGEMENT AND COORDINATE WITH THE BUILDING SUPERINTENDENT PRIOR TO ANY UTILITY SHUTDOWNS. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALE ON THE CONSTRUCTION DOCUMENTS. DO NOT SCALE DRAWING DIRECTLY.

TENANT SAFETY NOTES: 1. CONSTRUCTION WORK WILL BE CONFINED TO THE ITEMS AS INDICATED ON THE DRAWINGS AND WILL NOT CREATE DUST, DIRT OF OTHERSUCH INCONVENIENCE TO NEIGHBORS 2. CONSTRUCTION OPERATIONS WIL NOT BLOCK HALLWAYS OR MEANS OF EGRESS FOR TENANTS OF THE BUILDING. 3. CONSTRUCTION OPERATIONS WILL ALSO NOT INVOLVE INTERRUPTIONS OF HEATING, WATER OR OTHER ELECTRICAL SERVICES TO THE OTHER TENANTS OF THE BUILDING. 4. CONSTRUCTION OPERATIONS WILL BE CONFINED TO NORMAL WORKING HOURS SMOKE/ CARBON MONOXIDE DETECTOR NOTES, 2008 CODE: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

SMOKE/ CARBON MONOXIDE DETECTORS OR DEVICES SHALL BE INSTALLED IN ORDINANCE WITH THE HOUSING MAINTENANCE CODE, MULTIPLE DWELLING LAW OF THE NEW YORK CITY BUILDING CODE AND THE NEW YORK CITY ELECTRICAL CODE AND NFPA 72. SMOKE DETECTORS AND CARBON MONOXIDE DETECTORS MAY BE COMBINED PROVIDING THE DEVICES COMPLY WITH THE PROVISIONS OF TITLE 28 OF THE ADMINISTRATIVE CODE OF THE CITY OF NEW YORK AND ANY APPLICABLE RULES PROMULGATED THEREUNDER. EACH SMOKE/ CARBON MONOXIDE DETECTOR SHALL BE INSTALLED IN ACCORDANCE WITH REFERENCE STANDARD UL2034 AND UL2075 OF THE NEW YORK CITY BUILDING CODE. EACH SMOKE/ CARBON MONOXIDE DETECTOR SHALL BE INSTALLED OUTSIDE OF EACH SLEEPING ROOM IN THE IMMEDIATE VICINITY OR WITHIN 15'-0" OF THE ENTRANCE TO A SLEEPING ROOM; INSIDE EACH SLEEPING ROOM; AND ON EACH STORY WITHIN A DWELLING UNIT, INCLUDING BELOW GRADE STORIES AND PENTHOUSES PER 908.7.1.1.1 EACH SMOKE/ CARBON MONOXIDE DETECTOR SHALL BE OF A TYPE THAT ALLOWS FOR READILY TESTING OF SUCH DEVICE. DUPLEX UNITS SHALL HAVE A DEVICE LOCATED ON EACH LEVEL IF ONLY ONE MEANS OF EGRESS IS PROVIDED FROM EACH LEVEL. CEILING MOUNTED DEVICES SHALL BE A MINIMUM DISTANCE OF 4" FROM ANY WALL. WALL MOUNTED DEVICES SHALL BE A MINIMUM OF 4" TO A MAXIMUM OF 12" FROM THE CEILING. EACH DWELLING UNIT SHALL BE EQUIPPED WITH AN APPROVED TYPE SMOKE/ CARBON MONOXIDE DETECTOR DEVICE RECEIVING PRIMARY POWER FROM THE BUILDING WIRING WITH NO SWITCHES IN THE CIRCUIT OTHER THAN THE OVER CURRENT DEVICE PROTECTING THE BRANCH CIRCUIT AS PER NEW YORK CITY BUILDING CODE SEC. 907.2.10.2 THROUGH 907.2.10.4 EXISTING BUILDINGS NOT EQUIPPED WITH HARDWIRED CONNECTIONS SHALL BE SUPPLIED WITH BATTERY OPERATED DEVICES. SUCH SMOKE/ CARBON MONOXIDE DETECTORS MUST BE EITHER THE IONIZATION CHAMBER TYPE OR THE PHOTOELECTRIC DETECTOR TYPE AS PER NEW YORK CITY BUILDING CODE SEC. 907 AND 908. A "CERTIFICATE OF SATISFACTORY INSTALLATION FOR SMOKE/ CARBON MONOXIDE DETECTORS" MUST BE FILED WITH THE DIVISION OF CODE ENFORCEMENT H.P.D., 10 DAYS AFTER INSTALLATION. WRITTEN INFORMATION OF TESTING AND MAINTENANCE OF THE DEVICES SHALL BE PROVIDED TO THE DWELLING UNIT OWNER. IN MULTIPLE DWELLINGS (R-2), SMOKE ALARMS SHALL BE ABLE TO SUPPORT VISIBLE ALARM PER ANSI A117.1

NEW YORK CITY BUILDING DEPARTMENT PLUMBING NOTES, 2008 CODE: THE PLUMBING SYSTEMS (SANITARY, WASTE, VENT, WATER DISTRIBUTION AND GAS) AND ALL ASSOCIATED EQUIPMENT WILL BE INSTALLED AND MAINTAINED IN ACCORDANCE WITH THE FULL REQUIREMENTS OF THE NEW YORK CITY 2008 PLUMBING CODE. 1. THE SANITARY SYSTEM SHALL BE PROVIDED IN FULL ACCORDANCE WITH THE GENERAL PROVISIONS OF SECTION PC301. 2. THE MATERIALS USED IN THE PLUMBING SYSTEMS WILL BE PROVIDED IN FULL ACCORDANCE WITH SECTIONS PC302 AND PC303. 3. EQUIPMENT HOOK-UP AND THE JOINING WILL BE IN FULL COMPLIANCE WITH SECTIONS PC605 AND PC705. 4. THE INSTALLATION OF FIXTURES WILL BE IN FULL ACCORDANCE WITH PC CHAPTER 4. 5. TRAPS FOR FIXTURES AND DRAIN LINES WILL BE PROVIDED AND CLEANOUTS INSTALLED IN FULL COMPLIANCE WITH SECTIONS PC412, PC708 AND PC CHAPTER 10. 6. VERTICAL AND HORIZONTAL PIPING WILL BE HUNG AND SUPPORTED AS DIRECTED IN SPECIFICATIONS AND WITH THE FULL COMPLIANCE WITH SECTION PC308. 7. THE WATER SUPPLY SYSTEMS OF THE SUBJECT BUILDING SHALL BE INSTALLED AND MAINTAINED IN FULL COMPLIANCE WITH PC CHAPTER 6. 8. THE SANITARY DRAINAGE SYSTEM WILL BE SIZED AND INSTALLED IN FULL COMPLIANCE WITH PC CHAPTER 7. 9. THE VENT PIPING FOR THE SANITARY DRAINAGE SYSTEM OF THE SUBJECT BUILDING WILL BE INSTALLED IN FULL COMPLIANCE WITH SECTION PC702 & PC CHAPTER 9. 10. THE STORM DRAINAGE SYSTEM AND PIPING WILL BE INSTALLED IN FULL COMPLIANCE WITH PC CHAPTER 11. 11. GAS PIPING AND EQUIPMENT WILL BE INSTALLED IN FULL COMPLIANCE WITH THE NEW YORK CITY FUEL GAS CODE. 12. ALL TRENCHING SHALL BE DONE IN ACCORDANCE WITH THE REQUIREMENTS OF SECTION PC306. 13. RAT PROOFING SHALL BE IN ACCORDANCE WITH SECTION PC304. 14. TEMPORARY TOILET FACILITIES SHALL BE PROVIDED FOR WORKMEN AS PER SECTION PC311.

Design Development

EXISTING BUILDING SOIL AND VENT STACKS TO EXISTING SEWER

Bid Document Construction Document

ENERGY CODE COMPLIANCE: TO THE BEST OF MY KNOWLEDGE, BELIEF AND PROFESSIONAL JUDGEMENT, THIS APPLICATION IS IN COMPLIANCE W/ THE NYCECC.

DRAWING INDEX T- 001.00 COVER SHEET A- 001.00 DOOR SCHEDULE A-002.00 WINDOW SCHEDULE A-003.00 PLUMBING SCHEDULE A-004.00 LIGHTING AND APPLIANCE SCHEDULES A-005.00 HARDWARE SCHEDULE A-006.00 FINISH SCHEDULE A-101.00 DEMOLITION PLANS A-102.00 DEMOLITION PLANS A-103.00 CONSTRUCTION PLANS A-104.00 CONSTRUCTION PLANS A-105.00 REFLECTED CEILING PLANS A-106.00 REFLECTED CEILING PLANS A-107.00 FLOOR FINISH PLANS A-108.00 FLOOR FINISH PLANS A-109.00 POWER PLANS A-110.00 POWER PLANS A-201.00 REAR ELEVATION A-301.00 BASEMENT INTERIOR ELEVATIONS- PLAYROOM A-302.00 BASEMENT INTERIOR ELEVATIONS- MILLWORK DETAIL A-303.00 FIRST FLOOR INTERIOR ELEVATIONS- KITCHEN A-304.00 FIRST FLOOR INTERIOR ELEVATIONS- KITCHEN A-305.00 FIRST FLOOR INTERIOR ELEVATIONS- MILLWORK DETAIL A-306.00 FIRST FLOOR INTERIOR ELEVATIONS- POWDER ROOM A-307.00 FIRST FLOOR INTERIOR ELEVATIONS- CLOSET A-308.00 SECOND FLOOR INTERIOR ELEVATIONS- MASTER BEDROOM A-309.00 SECOND FLOOR INTERIOR ELEVATIONS- MASTER BATHROOM A-310.00 SECOND FLOOR INTERIOR ELEVATIONS- STUDY A-311.00 THIRD FLOOR INTERIOR ELEVATIONS- BATHROOM3 A-312.00 THIRD FLOOR INTERIOR ELEVATIONS- BEDROOM 1 A-313.00 THIRD FLOOR INTERIOR ELEVATIONS- BEDROOM 2 A-314.00 THIRD FLOOR INTERIOR ELEVATIONS- MILLWORK DETAIL A-501.00 TYPICAL DETAILS A-502.00 DOOR AND WINDOW DETAILS

Supplemental Information

06.10.2013

GENERAL NOTES: 1.

FIRST FLOOR

NEW FIXTURE AT EXISTING ROUGH-IN

101 REAR YARD

3 4"

LINE OF EXISTING WALL

CAP AND REMOVE EXISTING GAS FIREPLACE

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

DRAIN

SOUND BATT INSULATION

GAS FIREPLACE

NEW FIXTURE AT EXISTING ROUGH-IN

METAL STUDS @ 16" O.C. WITH 5 8" TYPE "X" GYP. BD. MTD. VERTICALLY EACH SIDE - SPACING & GAUGE PER LOCAL CODES

LAV

EXISTING PLUMBING LINES TO EXISTING STACK

210 AREA WAY

SECOND FLOOR

1 1-2" 4"

VARIES SEE ELEVATIONS

SEE ELEVATIONS

FURRING CHANNELS

SCHEDULED TILE IN THIN SET GROUT BED ON 21" CEMENT BD. (DUROCK OR APPROVED EQUAL)

VARIES SEE ELEVATIONS

5 8" TYPE "X" GYP. BD. MTD. VERTICALLY

5 8"GWB

VARIES

SCHEDULED TILE IN THIN SET GROUT BED ON 21" CEMENT BD. (DUROCK OR APPROVED EQUAL)

VARIES SEE ELEVATIONS

3 8" METAL STUDS @ 16" OR 24" O.C. WITH 5 8" TYPE "X" GYP. BD. MTD. VERTICALLY EACH SIDE - SPACING & GAUGE PER LOCAL CODES

SEE ELEVATIONS

VARIES

NEW FIREPLACE ON EXISTING ROUGH

3 4"

NEW PLUMBING LINES FROM RELOCATED FIXTURES BACK TO EXISTING STACK

LINE OF CEILING

LINE OF CEILING 15 8" METAL STUDS @ 16" O.C. - S PACING & GAUGE PER LOCAL CODES

LINE OF CEILING

GAS FIREPLACE

2" 2"

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

6" METAL STUDS @ 16" O.C. SPACING & GAUGE PER LOCAL CODES

GAS FIREPLACE

1 1-2"

ROUGH-IN NEW FIXTURE AT EXISTING ROUGH-INS

2ND FLOOR

LINE OF CEILING

architecture interiors

303 STUDY

HOSE BIB

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

NEW

1 1-2"

EXISTING CEILING

STORM WATER

1 FIXTURE AT 1-2" RELOCATED

SINK

CAP AND REMOVE EXISTING GAS FIREPLACE

204 POWDER ROOM

1 1-2"

307 MASTER BED

NEW FIXTURE AT EXISTING ROUGH-IN NEW FIXTURE AT NEW ROUGH-IN

NEW PLUMBING LINES FROM RELOCATED FIXTURE BACK TO EXISTING STACK

203 KITCHEN

1 1-2"

305 TERRACE

EXISTING BUILDING SOIL AND VENT STACKS

3 4"

EXISTING PLUMBING LINES TO EXISTING STACK

FIRESTOP FIRE RESISTANCE RATED CONSTRUCTION FINAL

LAV

GAS FIREPLACE

dhd

THIRD FLOOR

1 1-2"

CAP AND REMOVE EXISTING GAS FIREPLACE

1 1-2"

3RD FLOOR

TWO FAMILY RESIDENCE NO CHANGE OF OCCUPANCY. NO CHANGE TO EGRESS.

CAP AND REMOVE EXISTING FIXTURE CAP AND REMOVE EXISTING FIXTURE

1 1-2"

NEW FIXTURE AT RELOCATED ROUGH-IN

LAV

SHWR

TBD

BUILDING DEPARTMENT NOTES

10 0.6 7'

BUILDING OCCUPANCY GROUP:

410 BEDROOM 1

B 1"

GAS FIREPLACE

EXISTING BATHROOM

1 1-2"

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

304 MASTER BATHROOM

CLEANOUTS REQUIRED AT UPPER END OF ALL HORIZONTAL DRAIN LINES OVER 5'-0" IN LENGTH

208 E. 18TH STREET

NEW PLUMBING LINES FROM RELOCATED FIXTURE BACK TO EXISTING STACK

EXISTING PLUMBING LINES TO EXISTING STACK EXISTING BUILDING SOIL AND VENT STACKS

NEW FIXTURES AT RELOCATED ROUGH-INS

N.T.S.

NEW YORK, NY 10024

409 LAUNDRY 2

1 1-2"

PROPOSED GAS RISER DIAGRAM

N.T.S.

EXISTING BUILDING SOIL AND VENT STACKS

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

D.O.B.

BID SET Seal & Signature:

SUBMITTAL NOTES THE FOLLOWING SUBMITTALS MUST BE MADE TO THE ARCHITECT PRIOR TO EXECUTION: 1. DOORS & HARDWARE SCHEDULE WITH PRODUCT CUT SHEETS 2. ALL FINISH SAMPLES REGARDLESS OF SUPPLIER INCLUDING TILE, BASE, PAINT, WOOD FINISH, ETC. IN DUPLICATE 3. STONE / CARPET FLOORING LAYOUT DRAWINGS IN SCALE & DETAILS WITH ALL DIMENSIONS SHOWN. 4. MECHANICAL EQUIPMENT PRODUCT CUT SHEETS AND COMPLETE SHOP DRAWINGS OF DUCTWORK, LAYOUT, ETC. 5. ELECTRICAL EQUIPMENT PRODUCT CUT SHEETS AND COMPLETE SHOP DRAWINGS 6. APPLIANCES AND FIXTURES. PROVIDE CUT-SHEETS AND PRODUCT INFORMATION. 7. MILLWORK/WOOD SAMPLE TO BE SUBMITTED IN DUPLICATE TO ARCHITECT FOR APPROVAL

Date:

Scale:

Title:

CELLAR, BASEMENT AND FIRST FLOOR DEMOLITION PLANS Sheet No.:

File:

T-001.00 PAGE 1 OF 34

06 A502 6'-0" V.I.F

FIXED TRANSOM

02 A502

303 WEST 87 STREET

FIXED TRANSOM

NEW YORK, NY 10024

04 A502

Project No.: 13007

6'-0" V.I.F

EXISTING WOOD FRAME

PAINT EXISTING WOOD FRAME

WOOD FRAME TO MATCH EXISTING

EXISTING PULL

EXITING LEVER

ALUMINUM FRAME

EXISTING LEVER

SCHEDULED LEVER TO MATCH EXISTING

SCHEDULED LEVER

PAINTED WOOD

WOOD

PAINTED WOOD

EXISTING HINGES

HINGES

SCHEDULED OFFSET PIVOT HINGE

WOOD FRAME

EXISTING GLASS

ALUMINUM FRAME

10'-7" V.I.F

01 A502

WOOD FRAME TO MATCH EXISTING

PAINTED EXISTING WOOD FRAME

SCHEDULED LEVER TO MATCH EXISTING

dhd

SCHEDULED LEVER

PAINTED WOOD

7'-0" V.I.F

PAINTED METAL ALUMINUM DOOR ASSEMBLY WITH TEMPERED GLASS

03 A502 EXISTING HINGES

TYP.

DOOR_TYPE-1 1

EXISTING - NTS

DOOR NO.

DOOR_TYPE-2 EXISTING - NTS

DOOR_TYPE-3

NTS

EXISTING HINGES

TYP.

DOOR_TYPE-4

EXISTING - NTS

TYPE DESCRIPTION

DOOR_TYPE-5 EXISTING - NTS

TYP.

DOOR_TYPE-6 EXISTING - NTS

FINISH

HINGES/TRACKS

HARDWARE

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

1'-8" x 7'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

2'-0" x 7'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

NOMINAL DIM.

010 ELEVATOR

2'-8" x 7'-0" x 1-3/4"

D-002

009 CLOSET

D-003

011 CLOSET 004 STORAGE

2'-10" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

D-005

003 ELEVATOR MECH

2'-10" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

D-006

007 LAUNDRY

2'-10" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

D-007

006 POWDER ROOM

2'-10" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

D-008

005 MECHANICAL

2'-10" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

D-009

008 BOILER ROOM

2'-10" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

D-101

104 CLOSET

1'-8" x 7'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

PAINT

EXISTING

D-004

ROOM LOCATION

D-001

TYP.

SCHEDULED HINGES TO MATCH EXISTING

D-102

105 ELEVATOR

2'-8" x 7'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

D-103

101 REAR YARD

(2)3'-0" x 7'-0" x 1-3/4"

NEW CASEMENT DOORS

PAINT

TBD

D-104

101 REAR YARD

(2)3'-0" x 7'-0" x 1-3/4"

NEW CASEMENT DOORS

PAINT

TBD

DOOR_TYPE-7 EXISTING - NTS

ALUMINUM DOOR ASSEMBLY WITH TEMPERED GLASS

05 A502 SCHEDULED HINGES

architecture interiors

SCHEDULED HINGES C

DOOR_TYPE-8 NTS

NTS

ADDITONAL NOTES

BLACK INTERIOR AND EXTERIOR. TEMPERED GLASS. MOCKETT DS6A-26D CYLINDRICAL DOOR STOP BLACK INTERIOR AND EXTERIOR. TEMPERED GLASS. MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-105

106 VESTIBULE

2'-10" x 7'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

D-106

107 ENTRY

2'-10" x 7'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

D-107

108 AREAWAY

2'-10" x 7'-0" x 1-3/4"

EXISTING GATE

EXISTING

D-201

208 ENTRY DOOR

(2)2'-3" x 8'-0" x 1-3/4"

EXISTING ENTRY DOOR

EXISTING

D-202

207 CLOSET

2'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PASSAGE HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-203

204 POWDER

2'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PRIVACY HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-204

209 ELEVATOR

2'-8" x 8'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

EXISTING BLACK INTERIOR AND EXTERIOR. TEMPERED GLASS. MOCKETT DS6A-26D CYLINDRICAL DOOR STOP MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-205

201 BALCONY

(2)3'-0" x 10'-7" x 1-3/4"

NEW CASEMENT DOORS WITH TRANSOM

PAINT

TBD

D-301

303 STUDY

2'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PASSAGE HARDWARE SET TO MATCH EXISTING

D-302

MASTER SUITE

3'-2" x 8'-0" x 1-3/4"

EXISTING SOLID CORE POCKET DOOR

PAINT

EXISTING

D-303

304 MASTER BATH

2'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PRIVACY HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-304

304 MASTER BATH

2'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PRIVACY HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-305

305 MASTER CLOSET

2'-10" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PASSAGE HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-306

306 ELEVATOR

2'-8" x 8'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

D-307

309 TERRACE

(2)2'-10" x 8'-0" x 1-3/4"

EXISTING FRENCH DOORS

PAINT

EXISTING

D-308

302 LINEN

1'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET

D-309

304 MASTER BATH WC

2'-6" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PRIVACY HARDWARE SET TO MATCH EXISTING

D-310

307 MASTER BEDROOM

(3) 2'-1" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

RAJACK OFFSET PIVOT HINGE (OR APPROVED EQUAL)

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

D-311

307 MASTER BEDROOM

(2) 2'-2" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-401

406 LINEN

(2)2'-6" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-402

410 BEDROOM 1

3'-0" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PASSAGE HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-403

408 BATHROOM 3

2'-8" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

PRIVACY HARDWARE SET TO MATCH EXISTING

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-404

408 LAUNDRY 2

2'-4" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-405

405 ELEVATOR

2'-8" x 8'-0" x 1-3/4"

EXISTING HOLLOW METAL DOOR, FPSC 1-1/2" HR

PAINT

EXISTING

Seal & Signature:

D-406

402 BEDROOM 2

3'-0" x 8'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

Date:

D-408

401 TERRACE

2'-10" x 8'-0" x 1-3/4"

EXISTING

PAINT

EXISTING

Title:

D-409

407 BEDROOM 1

(3) 3'-0" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

RAJACK OFFSET PIVOT HINGE (OR APPROVED EQUAL)

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-410

402 BEDROOM 2

3'-0" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

D-411

402 BEDROOM 2

(2) 3'-0" x 8'-0" x 1-3/4"

STAVE CORE, PANEL DOOR TO MATCH EXISTING

PAINT

TO MATCH EXISTING

DUMMY HARDWARE SET TO MATCH EXISTING W EARTH MAGNET LATCH

MOCKETT DS6A-26D CYLINDRICAL DOOR STOP

1. ALL DOOR SILLS SHALL BE NO GREATER THAN 1/2" IN HEIGHT AND THE SLOPE OF THE SILL NO GREATER THAN 1" VERT. TO 2" HORIZ. TYPICAL 2. GENERAL CONTRACTOR SHALL PROVIDE REINFORCMENT AT HINGE SIDE OF DOOR AS REQUIRED TO PREVENT SAGGING 3. DOOR SUPPLIER SHALL FIELD VERIFY AND/OR COORDINATE DIMENSIONS WITH THE GENERAL CONTRACTOR

4. GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL ALL HARDWARE IN COMPLIANCE WITH ANSI AND ADA REQUIREMENTS 5. ALL PAINTED DOORS SHALL BE SHOP PRIMED AND PAINTED 6. UNDERCUT BATHROOM DOORS 1" AS REQUIRED FOR VENTILATION 7. GC SHALL PROVIDE NEW DOORSTOPS TO EXISTING DOORS IF REQUIRED

DOOR_TYPE-9

8. SEE DOOR DETAILS FOR MORE INFORMATION 9. DOOR FABRICATOR TO VERIFY ALL DIMENSIONS PRIOR TO FABRICATION

Scale:

DOOR SCHEDULE Sheet No.:

File:

A-001.00 PAGE 12 OF 34

VARIES

08 A502

303 WEST 87 STREET

6'-0"

NEW YORK, NY 10024 EXISTING

FIXED TRANSOM

Project No.: 13007

FIXED TRANSOM

dhd

VARIES

1" 8'-12

EXISTING

VARIES

EXISTING

architecture interiors 07 A502 C

WINDOW_TYPE-A NTS

WINDOW_TYPE-B

NTS

WINDOW_TYPE-C

NTS

WINDOW_TYPE-D

NTS

WINDOW_TYPE-E NTS

WINDOW SCHEDULE ROOM

LOCATION

NOMINAL DIM.

TYPE

EAST WALL

EXISTING

TYPE C

DESCRIPTION

NOTES

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT EXTERIOR, COLOR TBD

W101

TENANT APARTMENT

W102

TENANT APARTMENT

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT EXTERIOR, COLOR TBD

W103

TENANT APARTMENT

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT EXTERIOR, COLOR TBD

EXISTING ALUMINUM DOUBLE HUNG WINDOW

W201

205 LIVING ROOM

EAST WALL

EXISTING

TYPE C

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W202

205 LIVING ROOM

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W203

205 LIVING ROOM

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

TYPE E

W204

202 LIVING ROOM

WEST WALL

6'-0" X

NEW CASEMENT WINDOW WITH TEMPERED GLASS, BLACK INTERIOR AND EXTERIOR

TBD

W301

303 STUDY

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W302

303 STUDY

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W303

303 STUDY

EAST WALL

EXISTING

TYPE C

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W304

303 STUDY

EAST WALL

EXISTING

TYPE D

EXISTING ALUMINUM DOUBLE HUNG WINDOW W ARCH TOP

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W305

305 MASTER CLOSET

WEST WALL

EXISTING

TYPE A

EXISTING ALUMINUM WINDOW WITH TWO OUT SWING CASEMENTS

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W401

410 BEDROOM 1

EAST WALL

EXISTING

TYPE D

EXISTING ALUMINUM DOUBLE HUNG WINDOW W ARCH TOP

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W402

410 BEDROOM 1

EAST WALL

EXISTING

TYPE D

EXISTING ALUMINUM DOUBLE HUNG WINDOW W ARCH TOP

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

EXISTING ALUMINUM DOUBLE HUNG WINDOW W ARCH TOP

8'-121"

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service

W403

410 BEDROOM 1

EAST WALL

EXISTING

TYPE D

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W404

410 BEDROOM 1

EAST WALL

EXISTING

TYPE D

EXISTING ALUMINUM DOUBLE HUNG WINDOW W ARCH TOP

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

W406

402 BEDROOM 2

WEST WALL

EXISTING

TYPE B

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

Bid Document

W407

402 BEDROOM 2

WEST WALL

EXISTING

TYPE B

EXISTING ALUMINUM DOUBLE HUNG WINDOW

EXISTING

PAINT INTERIOR AND EXTERIOR, COLOR TBD

Construction Document

Schematic Design Design Development

Supplemental Information

WINDOW AND DOOR NOTES: 1

D.O.B.

BID SET

MANUFACTURER VARIATION SHALL BE VERIFIED IN FIELD DURING SHOP-DRAWING PROCESS.

2 3

. AND WINDOW JAMBS, HEADS AND SILLS

Seal & Signature:

Date:

Scale:

Title:

WINDOW SCHEDULE Sheet No.:

File:

A-002.00 PAGE 13 OF 34

NOTE: G.C. SHALL PROVIDE SUBMITTALS FOR ARCHITECT AND OWNER APPROVAL PRIOR TO PURCHASE. GC SHALL VERIFY ALL COMPONENTS REQUIRED FOR PROPER INSTALLATION PRIOR TO PURCHASING, AND NOTIFY ARCHITECT AND OWNER OF ANY ADDITIONAL ITEMS REQUIRED.

PLUMBING & ACCESSORIES SCHEDULE ITEM

QUANTITY

MANUFACTURER

MODEL NO.

SERIES / DESCRIPTION

SIZE

COLOR/ FINISH

ADDITIONAL INFORMATION

ROOM 203 KITCHEN FAUCET

KWC

10.271.303.700

SUPRIMO SINGLE-LEVER MIXER

11-1/8" X 9-1/16"

STAINLESS STEEL

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

WATER FILTER

ROHL

U.1601L

CONTEMPORARY FILTER FAUCET

11" SPOUT HEIGHT, 6" SWIVEL SPOUT

SATIN NICKEL

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

POT FILLER

KWC

100.500.357.700

SYSTEMA POT FILLER

24" REACH EXTENSION

STAINLESS STEEL

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

SINK

BLANCO

516194

BLANCO PRECISION MICROEDGE SUPER SINGLE BOWL WITH LEDGE

32-1/2" X 20-1/2"

STAINLESS STEEL

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

MATT-PLATINUM

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd

ROOM 304 MASTER BATHROOM DECK MOUNT TUB FILLER, CONTROLS AND HANDSHOWER

DORNBRACHT

27512882

TARA DECKMOUNTED TUB MIXER, WITH HAND SHOWER SET FOR DECKMOUNTED TUB INSTALLATION

SEE SPECIFICATION

TUB

DURAVIT

700020

HAPPY D BATHTUB LAY-ON VERSION, 41" SANITARY ACRYLIC

70 78" X 3121" X 18 78"

00 WHITE

TOILET

TOTO

CST416M

TOTO AQUIA II DUAL FLUSH TOILET

SEE SPECIFICATION

#01 COTTON

DECK MOUNT FAUCET

DURAVIT

033849

TARA THREE-HOLE LAVATORY MIXER

1021" TALL, 538" PROJECTION

MATT-PLATINUM

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

SINK

KOHLER

K-2214-0

D-COE 1921" UNDERMOUNT VANITY BASIN

6-7/8" X 20-3/4" X 12-5/8"

WHITE

SHOWERHEAD

DORNBRACHT

28549970

TARA RAIN SHOWER WITH WALL CONNECTION

17-3/4" X 8-5/8" X 2-3/8"

MATT-PLATINUM

HANDSHOWER

DORNBRACHT

27802892-06

TARA HAND SHOWER SET

SEE SPECIFICATIONS

MATT-PLATINUM

THERMOSTATIC CONTROL TRIM

DORNBRACHT

36416979-06

TARA X TOOL THERMOSTAT WITHOUT VOLUME CONTROL

4-7/8" FLANGE DIAMETER

MATT-PLATINUM

THERMOSTATIC CONTROL VALVE

DORNBRACHT

TBD

N/A

VOLUME CONTROL TRIM

DORNBRACHT

36310882-06

TARA WALL VALVE

2-1/8" FLANGE DIAMETER

MATT-PLATINUM

VOLUME CONTROL VALVE

DORNBRACHT

35621970

ROUGH FOR WALL-MOUNTED VOLUME CONTROL 12" CLOCKWISE CLOSING

N/A

TOILET PAPER HOLDER

DORNBRACHT

83500892-06

TARA TISSUE HOLDER WITHOUT COVER

3-78" X 6" X 2-78"

MATT-PLATINUM

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

TOWEL BAR

DORNBRACHT

83060892-00

TARA TOWEL BAR 24"

23-58" X 3-81"

MATT-PLATINUM

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

HAND TOWEL BAR

DORNBRACHT

83030892-06

TARA TOWEL BAR 12"

11-34" X 3-81"

MATT-PLATINUM

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

ROBE HOOK

DORNBRACHT

83251220-06

TARA HOOK

2-81" PROJECTION

MATT-PLATINUM

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

STEAM UNIT

MR STEAM

MS-SUPER1EC1

SHOWER STEAM UNIT

SEE SPECIFICATIONS

BRUSHED NICKEL

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

architecture interiors

WITH POLISHED CHROME POP UP DRAIN C

ROOM 403 BATHROOM 3 DECK MOUNT FAUCET

WATERWORKS

07-38204-12950

FLYTE LOW PROFILE THREE HOLE DECK MOUNTED LAVATORY FAUCET WITH METAL LEVER HANDLES

7 4-81" H x 6-16 "D

CHROME

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

SINK

KOHLER

K-2214-0

LADENA UNDERCOUNTER LAVATORY WITH OVERFLOW

8-1/8" X 20-7/8" X 14-3/8"

WHITE

WITH POLISHED CHROME DRAIN

TOILET

TOTO

CST416M

TOTO AQUIA II DUAL FLUSH TOILET

SEE SPECIFICATION

#01 COTTON

TUB

KOLHER

K-863

#01 COTTON

WITH POLISHED CHROME DRAIN

WATERWORKS

09-48141-36049

KOHLER TEA-FOR-TWO CAST IRON DROP-IN/UNDERMOUNT BATH WITH REVERSIBLE DRAIN FLYTE WALL MOUNTED TUB SPOUT

71-34 " X 36" X 20-78"

TUB SPOUT

3 2-38" X 7-15 16" X 24"

CHROME

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

HAND-SHOWER

WATERWORKS

05-90899-75700

FLYTE HANDSHOWER ON HOOK

9 " X 9" 3-34" X 3-16

CHROME

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

SHOWER ARM AND FLANGE

WATERWORKS

05-75929-52781

FLYTE SHOWER ARM AND FLANGE

9", Ø 238"

CHROME

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

SHOWER HEAD

WATERWORKS

05-75429-38751

UNIVERSAL 6" RAIN SHOWER HEAD

CHROME

THERMOSTATIC CONTROL TRIM

WATERWORKS

05-78610-04662

FLYTE THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLES

5-21" x 2-58" x 521"

CHROME

THERMOSTATIC CONTROL ROUGH

WATERWORKS

26-80190-84003

UNIVERSAL 21" THERMOSTATIC VALVE

REFER TO SPECIFICATION

N/A

VOLUME CONTROL TRIM

WATERWORKS

05-96038-75510

FLYTE VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLES

5 5 " x 4-16 " 2-38" x 2-16

CHROME

VOLUME CONTROL ROUGH

WATERWORKS

UNIVERSAL 21" VALVE

HOTEL RACK

ROHL

SY303

24" HOTEL STYLE TOWEL RACK

11 7 7-16 " x 3-16 " x 2-38"

CHROME

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

TOILET PAPER HOLDER

WATERWORKS

22-17622-62164

FLYTE WALL MOUNTED ONE ARM PAPER HOLDER

4-34" x 15-83" x 23-58" 7 " 3-16

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

CHROME

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

2-38"

TOWEL BAR

WATERWORKS

22-50059-19662

FLYTE SINGLE 24" TOWEL BAR

24" X

CHROME

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

HAND TOWEL BAR

WATERWORKS

22-43130-77563

FLYTE SINGLE 18" TOWEL BAR

7 18" X 3-16 " X 2-38"

CHROME

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

FLYTE SINGLE HOOK

2-83"

CHROME

GC TO PROVIDE IN WALL BLOCKING AS REQUIRED

ROBE HOOKS

WATERWORKS

22-72044-37407

11 2-16 "

2-38"

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development Bid Document

ROOM 204 POWDER DECK MOUNT FAUCET

WATERWORKS

07-41376-00777

HENRY GOOSENECK THREE HOLE DECK MOUNTED LAVATORY FAUCET WITH METAL LEVER HANDLES IN MATTE NICKEL

SEE SPECIFICATION

MATTE NICKEL

PEDESTAL LAVATORY

ANN SACKS

AS7653

ORLO STONE PEDESTAL

24" X 17-21" X 3421"

CARARA

TOILET

TOTO

CST416M

TOTO AQUIA II DUAL FLUSH TOILET

SEE SPECIFICATION

#01 COTTON

TOILET PAPER HOLDER

WATERWORKS

22-90528-33304

FLYTE WALL MOUNTED ONE ARM PAPER HOLDER

9 3 6-16 " X 3-16 " X 4-13 16"

MATTE NICKEL

HAND TOWEL BAR

WATERWORKS

22-39227-49736

FLYTE SINGLE 18" TOWEL BAR

18" X 3-7/16" X 2-3/8"

MATTE NICKEL

STAINLESS STEEL

Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

ROOM 102 PLAYROOM DECK MOUNT FAUCET

KWC

10.271.303.700

SUPRIMO SINGLE-LEVER MIXER

11-1/8" X 9-1/16"

SINK

FRANKE

LAX11015

LARGO STAINLESS STEEL SINK

5 1 15-38" X 17-16 " X 9-16 "

STAINLESS STEEL

GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER GC CONFIRM ROUGH-IN SIZE PRIOR TO ORDER

Date:

Scale:

Title:

PLUMBING SCHEDULE Sheet No.:

File:

A-003.00 PAGE 14 OF 34

LIGHTING SCHEDULE TYPE

QUANITITY

DESCRIPTION

ROOM

MANUFACTURER/ VENDOR

MODEL #

SERIES/ DESCRIPTION

LAMP

SIZE

FINISH

ADDITIONAL

303 WEST 87 STREET NEW YORK, NY 10024 L1

SURFACE MOUNT FLUORESCENT

001 BOILER ROOM, 007 LAUNDRY, 006 BATH 1, 005 MECH, 004 STORAGE, 106 VESTIBULE, 107 ENTRY,207 CLOSET, 305 MASTER CLOSET

RECESSED CEILING LIGHT

144

THROUGH-OUT

SURFACE MOUNT FLUORESCENT

001 CELLAR STORAGE

WALL SCONCE

002 HALLWAY 103 HALLWAY

OWNER SUPPLIED PENDANT LIGHT

203 KITCHEN

TBD

OWNER SUPPLIED SCONCE

304 MASTER BATHROOM

TBD

LED STRIP LIGHT

DIODE LED

STRIP LIGHT: DI-0090, CHANNEL :DI-1050, DIFFUSER:DI-1060, END CAP:DI-1080. DIMMING DRIVER: DI-0922, OR AS REQ.

BLAZE HIGH OUTPUT STRIP LIGHT (WARM WHITE), KLUS QUAD ALUMINUM CHANNEL WITH FROSTED DIFFUSER, AND 60W HARDWIRED DIMMABLE DRIVER (REFER TO SPECS TO SIZE DRIVER)

2.9W PER FT LED (REFER TO SPECS FOR MORE INFO)

CUT TO LENGTH IN FIELD. DIMMABLE DRIVER IS 8.4" X 3.1" X 2.9" OR AS REQUIRED

ALUMINUM CHANNEL WITH FROSTED DIFFUSER

USE THE LUTRON LOW VOLTAGE MAGNETIC DIMMER SWITCHES. LOCATE DIMMING DRIVERS IN FIELD WITH ARCHITECT AND OWNER.

OWNER SUPPLIED WALL SCONCE

TBD

L9a

FLUORESCENT STRIP FIXTURE ON CONTACT SWITCH

L9b

FLUORESCENT STRIP FIXTURE ON CONTACT SWITCH

L9c

FIELD VERIFY 303 STUDY, 203 KITCHEN, 407 BEDROOM 1, LENGHTS 402 BEDROOM 2, 204 POWDER ROOM, 305 MASTER CLOSET 206 ENTRY

700CQL-C-LED

TECH LIGHTING

LED 2700K 120V

CIRQUE LARGE LED CEILING FIXTURE

11"DIA. X 2.2"H

CHROME

Project No.: 13007

dhd ARTEMIDE

SURF 12 WALL

SURF 12 HALOGEN WALL SCONCE

(1) 300W R7S/T3

7 3 11 13 16"W X 68"D X 1 4"H

WHITE

407 BEDROOM 1, 408 LAUNDRY 2, 402 BEDROOM 2, 104 CLOSET, 009 CLOSET

NORA LIGHTING

C2-NULS-18

LOW PROFILE T5 FLUORESCENT UNDER CABINET FIXTURE

F18T5 18W

25-1/8 x 78 x 1-11/16

WHITE

HARDWIRED TO CONTACT SWITCH

402 BEDROOM 2, 302 LINEN

NORA LIGHTING

C2-NULS-13

LOW PROFILE T5 FLUORESCENT UNDER CABINET FIXTURE

F13T5 13W

22-1/2 x 78 x 1-11/16

WHITE

HARDWIRED TO CONTACT SWITCH

FLUORESCENT STRIP FIXTURE ON CONTACT SWITCH

406 LINEN, 407 BEDROOM 1

NORA LIGHTING

C2-NULS-21

LOW PROFILE T5 FLUORESCENT UNDER CABINET FIXTURE

F21T5 21W

35-1/2 x 78 x 1-11/16

WHITE

HARDWIRED TO CONTACT SWITCH

L10

OWNER SUPPLIED EXTERIOR SCONCE

101 REARYARD, 201 BALCONY, 305 TERRACE, 401 TERRACE

TBD

L11

OWNER SUPPLIED WALL SCONCE

307 MASTER BEDROOM

TBD

L12

OWNER SUPPLIED WALL SCONCE

STAIR LANDINGS

TBD

L13

OWNER SUPPLIED PENDANT

304 MASTER BATHROOM

TBD

L14

OWNER SUPPLIED PENDANT

301 HALLWAY

TBD

L15

OWNER SUPPLIED PENDANT

L16

OWNER SUPPLIED EXTERIOR STAKE LIGHTS

L17

OWNER SUPPLIED SCONCE

402 BEDROOM 2 407 BEDROOM 1 307 MASTER BEDROOM 303 STUDY

TBD

architecture interiors

TBD

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

101 REARYARDS

TBD

403 BATHROOM 3

TBD

Design Development Bid Document

Construction Document Supplemental Information

APPLIANCE SCHEDULE ROOM #

ROOM NAME

DESCRIPTION

D.O.B.

QUANTITY MANUFACTURER

MODEL #

FINISH

Seal & Signature:

203

KITCHEN

48" RANGE, 6 BURNERS, GRIDDLE

WOLF

GR486G

STAINLESS STEEL

203

KITCHEN

MICROWAVE

TBD

203

KITCHEN

42" BUILT IN SIDE-BY-SIDE FRIDGE/FREEZER W ICE MAKER

SUB ZERO

BI-42SID/O

STAINLESS STEEL

FLUSH INSET PANELING WITH SUB ZERO TUBULAR HANDLES

203

KITCHEN

24" UNDERCOUNTER WINE REFRIGERATOR

SUB ZERO

424G/O

STAINLESS STEEL

OVERLAY WITH SUB ZERO TUBULAR HANDLES

203

KITCHEN

FULLY INTEGRATED DISHWASHER

MIELE

DIAMOND G 5975 SCVI

STAINLESS STEEL

FULLY INTEGRATED

203

KITCHEN

1HP BATCH FEED GARBAGE DISPOSAL

KITCHEN AID

KBDS100T

N/A

102

PLAYROOM

24" UNDERCOUNTER BEVERAGE REFRIGERATOR

SUB ZERO

Date:

UC-24BG/O

STAINLESS STEEL

OVERLAY WITH SUB ZERO TUBULAR HANDLES FULLY INTEGRATED FULLY INTEGRATED

102

PLAYROOM

24" SUBZERO COMBINATION DRAWERS WITH ICE MAKER

SUB ZERO

700BCI

STAINLESS STEEL

102

PLAYROOM

FULLY INTEGRATED DISHWASHER

MIELE

CLASSIC G 4275 SCVi

STAINLESS STEEL

102

PLAYROOM

FIREPLACE

REGENCY

CLASSHZ42-NG

N/A

BID SET

NOTES

Scale:

Title:

LIGHTING AND APPLIANCE SCHEDULES Sheet No.:

File:

A-004.00 PAGE 15 OF 34

303 WEST 87 STREET

HARDWARE & ACCESSORIES SCHEDULE ITEM

QUANTITY MANUFACTURER

NEW YORK, NY 10024

MODEL NO.

SERIES / DESCRIPTION

SIZE

COLOR/ FINISH

ADDITIONAL INFORMATION

ROOM 408 BATHROOM 3 SHOWER CURTAIN ROD

GINGER

0239B

MOTIV-SINE SHOWER ROD BRACKETS

REFER TO SPECIFICATION SHEET

POLISHED CHROME

SHELF SUPPORTS

T.B.D.

HAFELE

282.39.705

SHELF-SUPPORTS WITH M4 THREADS SCREW-MOUNT IN EXPANDING SLEEVES

REFER TO SPECIFICATION SHEET

STEEL, NICKEL PLATED

UNDER-SINK LINER

DOUG MOCKETT

UNDERSINK

CUT-TO-SIZE EMBOSSED AND POLISHED ALUMINUM UNDER SINK LINER WITH RUBBER TRIM

CUT-TO-SIZE

ALUMINUM

G.C. SHALL PROVIDE DOUG MOCKETT WITH EXACT INTERIOR CABINET DIMENSIONS

CABINET HINGE

T.B.D.

HAFELE

H-SERIES HINGE

HEAVY-DUTY CONCEALED EUROPEAN HINGE, 110° OPENING ANGLE

T.B.D. BY CABINET MAKER

STEEL, NICKEL-PLATED

FOR USE AT ALL BATH MILLWORK

BRASS, BRIGHT

FOR USE AT ALL BATH MILLWORK

SPREADING DOWELS

T.B.D.

HAFELE

051.45.004

SPREADING DOWELS WITH M4 INTERNAL THREADS

REFER TO SPECIFICATION SHEET

DRAWER GLIDES

T.B.D.

HAFELE

3832SC

ACCURIDE HEAVY-DUTY FULL-EXTENSION DRAWER GLIDES

T.B.D. BY CABINET MAKER

VANITY PULLS

HOUSE OF ANTIQUE HARDWARE

R-08DE-136-PN

334" PLAIN BRASS BIN PULL WITH CHOICE OF FINISH

5 3-34" W X 34" H. 3-16 "

FOR USE AT ALL BATH MILLWORK

Project No.: 13007

dhd

FOR USE WITH DRAWERS POLISHED NICKEL

architecture interiors

ROOM 305 MASTER BATHROOM SHOWER DOOR TRANSOM

CR LAURENCE

SGC188SN

CRL SATIN NICKEL SQUARE 180 DEGREE GLASS-TO-GLASS MOVABLE TRANSOM CLAMP

REFER TO SPECIFICATION SHEET

SATIN NICKEL

SHOWER DOOR HINGE

CR LAURENCE

GEN180SN

CRL SATIN NICKEL GENEVA 180 SERIES 180 DEGREE GLASS-TO-GLASS STANDARD HINGE

REFER TO SPECIFICATION SHEET

SATIN NICKEL

SHOWER DOOR HANDLE

CR LAURENCE

SQ24X24SN

CRL SATIN NICKEL 24" SQUARE STYLE BACK-TO-BACK TOWEL BAR

24"

SATIN NICKEL

VANITY PULLS

URBAN ARCHAEOLOGY

UA5100 H

T-PULL SMALL DRAWER PULL

2-41" X 1-38"

SATIN NICKEL

FOR USE AT ALL BATH MILLWORK

SHELF SUPPORTS

T.B.D.

HAFELE

282.39.705

SHELF-SUPPORTS WITH M4 THREADS SCREW-MOUNT IN EXPANDING SLEEVES

REFER TO SPECIFICATION SHEET

STEEL, NICKEL PLATED

UNDER-SINK LINER

DOUG MOCKETT

UNDERSINK

CUT-TO-SIZE EMBOSSED AND POLISHED ALUMINUM UNDER SINK LINER WITH RUBBER TRIM

CUT-TO-SIZE

ALUMINUM

G.C. SHALL PROVIDE DOUG MOCKETT WITH EXACT INTERIOR CABINET DIMENSIONS

CABINET HINGE

T.B.D.

HAFELE

H-SERIES HINGE

HEAVY-DUTY CONCEALED EUROPEAN HINGE, 110° OPENING ANGLE

T.B.D. BY CABINET MAKER

STEEL, NICKEL-PLATED

FOR USE AT ALL BATH MILLWORK

BRASS, BRIGHT

SPREADING DOWELS

T.B.D.

HAFELE

051.45.004

SPREADING DOWELS WITH M4 INTERNAL THREADS

REFER TO SPECIFICATION SHEET

DRAWER GLIDES

T.B.D.

HAFELE

3832SC

ACCURIDE HEAVY-DUTY FULL-EXTENSION DRAWER GLIDES

T.B.D. BY CABINET MAKER

FOR USE AT ALL BATH MILLWORK FOR USE WITH DRAWERS

ROOM 203 KITCHEN CABINET PULLS

ROCKY MOUNTAIN

CK355

OLYMPUS 10" PULL

SHELF SUPPORTS

T.B.D.

HAFELE

282.39.705

SHELF-SUPPORTS WITH M4 THREADS SCREW-MOUNT IN EXPANDING SLEEVES

REFER TO SPECIFICATION SHEET

STEEL, NICKEL PLATED

UNDER-SINK LINER

DOUG MOCKETT

UNDERSINK

CUT-TO-SIZE EMBOSSED AND POLISHED ALUMINUM UNDER SINK LINER WITH RUBBER TRIM

CUT-TO-SIZE

ALUMINUM

G.C. SHALL PROVIDE DOUG MOCKETT WITH EXACT INTERIOR CABINET DIMENSIONS

CABINET HINGE

T.B.D.

HAFELE

H-SERIES HINGE

HEAVY-DUTY CONCEALED EUROPEAN HINGE, 110° OPENING ANGLE

T.B.D. BY CABINET MAKER

STEEL, NICKEL-PLATED

FOR USE AT ALL KITCHEN MILLWORK

BRASS, BRIGHT

FOR USE AT ALL KITCHEN MILLWORK

WHITE BRONZE

SPREADING DOWELS

T.B.D.

HAFELE

051.45.004

SPREADING DOWELS WITH M4 INTERNAL THREADS

REFER TO SPECIFICATION SHEET

DRAWER GLIDES

T.B.D.

HAFELE

3832SC

ACCURIDE HEAVY-DUTY FULL-EXTENSION DRAWER GLIDES

T.B.D. BY CABINET MAKER

GROMMET

MOCKETT

MM4/MMAA

GROMMET

2-3/16"

SATIN NICKEL

FOR USE AT ALL KITCHEN MILLWORK

FOR USE WITH KITCHEN DRAWERS

ROOM 102 PLAYROOM CABINET PULLS

T.B.D

MOCKET

DP105B/3

SQUARE PULL

21 13-61" X 1-32 "

SHELF SUPPORTS

T.B.D.

HAFELE

282.39.705

SHELF-SUPPORTS WITH M4 THREADS SCREW-MOUNT IN EXPANDING SLEEVES

REFER TO SPECIFICATION SHEET

STEEL, NICKEL PLATED

FOR USE AT ALL PLAYROOM MILLWORK

UNDER-SINK LINER

DOUG MOCKETT

UNDERSINK

CUT-TO-SIZE EMBOSSED AND POLISHED ALUMINUM UNDER SINK LINER WITH RUBBER TRIM

CUT-TO-SIZE

ALUMINUM

G.C. SHALL PROVIDE DOUG MOCKETT WITH EXACT INTERIOR CABINET DIMENSIONS

CABINET HINGE

T.B.D.

HAFELE

H-SERIES HINGE

HEAVY-DUTY CONCEALED EUROPEAN HINGE, 110° OPENING ANGLE

T.B.D. BY CABINET MAKER

STEEL, NICKEL-PLATED

FOR USE AT ALL PLAYROOM MILLWORK

SPREADING DOWELS

T.B.D.

HAFELE

051.45.004

SPREADING DOWELS WITH M4 INTERNAL THREADS

REFER TO SPECIFICATION SHEET

BRASS, BRIGHT

FOR USE AT ALL PLAYROOM MILLWORK

DRAWER GLIDES

T.B.D.

HAFELE

3832SC

ACCURIDE HEAVY-DUTY FULL-EXTENSION DRAWER GLIDES

T.B.D. BY CABINET MAKER

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service

FOR USE WITH PLAYROOM DRAWERS

Schematic Design

ROOM 303 STUDY

Design Development Bid Document

CABINET PULLS

T.B.D

MOCKET

DP105B/3

SQUARE PULL

21 13-61" X 1-32 "

SATIN NICKEL

SHELF SUPPORTS

T.B.D.

HAFELE

282.39.705

SHELF-SUPPORTS WITH M4 THREADS SCREW-MOUNT IN EXPANDING SLEEVES

REFER TO SPECIFICATION SHEET

STEEL, NICKEL PLATED

FOR USE AT ALL PLAYROOM MILLWORK

CABINET HINGE

T.B.D.

HAFELE

H-SERIES HINGE

HEAVY-DUTY CONCEALED EUROPEAN HINGE, 110° OPENING ANGLE

T.B.D. BY CABINET MAKER

STEEL, NICKEL-PLATED

FOR USE AT ALL PLAYROOM MILLWORK

Supplemental Information

SPREADING DOWELS

T.B.D.

HAFELE

051.45.004

SPREADING DOWELS WITH M4 INTERNAL THREADS

REFER TO SPECIFICATION SHEET

BRASS, BRIGHT

FOR USE AT ALL PLAYROOM MILLWORK

D.O.B.

DRAWER GLIDES

T.B.D.

HAFELE

3832SC

ACCURIDE HEAVY-DUTY FULL-EXTENSION DRAWER GLIDES

T.B.D. BY CABINET MAKER

Construction Document

BID SET

FOR USE WITH PLAYROOM DRAWERS Seal & Signature:

Date:

Scale:

Title:

HARDWARE SCHEDULE Sheet No.:

File:

A-005.00 PAGE 16 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

FINISH KEY DESCRIPTION

NOTE: G.C. SHALL SUBMIT CONTROL SAMPLES FOR ARCHITECT AND CLIENT APPROVAL. REFER TO GENERAL NOTES IN PROJECT MANUAL FOR MORE INFORMATION SIZE, SPECIES, ITEM #

COLOR, FINISH

MANUFACTURER/ VENDOR

ROOM #, LOCATION

TBD; SHOP LACQUERED FINISH

BENJAMIN MOORE

403 BATHROOM 3 MILLWORK, 304 MASTER BATHROOM MILLWORK, 307 MASTER BEDROOM CLOSET CEILINGS (THROUGHOUT)

dhd

ADDITIONAL INFORMATION

PAINT P-1

PAINT

P-2

PAINT

TBD; FLAT FINISH

BENJAMIN MOORE

P-3

PAINT

TBD; OIL-BASED, SATIN FINISH

BENJAMIN MOORE

TRIM, MOLDINGS, DOORS, DOOR JAMBS

P-4

PAINT

TBD, EGGSHELL

BENJAMIN MOORE

WALLS

P-5

PAINT

TBD, MATTE

BENJAMIN MOORE AURA BATH AND SPA

BATHROOM WALLS AND CEILING

PAINT

TBD, SHOP PRIMED, FIELD PAINTED

BENJAMIN MOORE

102 PLAYROOM MILLWORK, 303 STUDY MILLWORK, 402 BEDROOM 2, 407 BEDROOM 1

HONED

STONESOURCE

203 KITCHEN COUNTER AND BACKSPLASH

MITRE PROFILE AS NOTED IN ELEVATIONS MITRE PROFILE AS NOTED IN ELEVATIONS MITRE PROFILE AS NOTED IN ELEVATIONS

P-6

architecture interiors

STONE & TILE S-1

MARBLE SLAB

CREMA CALACATTA MARBLE

S-2

MARBLE SLAB

THASSOS , 34" THICK

HONED

COMPLETE TILE COLLECTION

304 MASTER BATH VANITY COUNTER, TUB COUNTER, SHOWER CURB, NICHE 403 BATHROOM 3 VANITY COUNTER, NICHE, REFER TO ELEVATIONS

S-3

MARBLE SLAB

OPAL WHITE, 34: THICK

WHITE, POLISHED

STONESOURCE

204 POWDER ROOM WALLS

S-4

MARBLE SLAB

WALLACE CREEK

BLACK, BRUSHED

STONESOURCE

102 PLAYROOM FIREPLACE

T-1

STONE TILE

HELSINKI MESH-MOUNTED SMALL BRICK 1" X 4"

SILVER DUSK, HONED

WALKER ZANGER

304 MASTER BATHROOM TUB SURROUND, REFER TO ELEVATIONS

T-2

STONE TILE

HELSINKI CHEVRON FIELD 4" X 16"

SILVER DUSK, HONED

WALKER ZANGER

304 MASTER BATHROOM WALLS, REFER TO ELEVATIONS

T-3

PORCELAIN TILE

GEOTECH GEOWHITE 12" X 24"

NATURAL FINISH

STONE SOURCE

202 DINING, 203 KITCHEN

HONED

COMPLETE TILE COLLECTION

403 BATHROOM 3 WALLS

WHITE THASSOS/BLUE CELESTE, HONED FINISH

ANNE SACKS

403 BATHROOM 3 FLOOR

OR APPROVED EQUAL

TBD

101 REARYARD, 108 AREAWAY - TILE - SLAB ON GRADE 305 TERRACE, 401 TERRACE - TILE - ON PEDESTAL

RETAIN COPING AT 305 TERRACE AND 401 TERRACE IF POSSIBLE

STARFIRE CLEAR TEMPERED GLASS

TBD

T-4

STONE TILE

THASSOS MARBLE TILE

3 8"

THICK, 3" X 6"

3 8"

T-5

STONE TILE

STONE BASKETWEAVE,

T-6

BLUESTONE PAVER

BLUESTONE PAVER, 34" THICK, 12" X 24"

THICK

OR APPROVED EQUAL

GLASS & MIRROR 3 8" THICK REFER TO ELEVATIONS AND VERIFY DIMENSIONS IN FIELD

G-1

CLEAR GLASS

G-2

MIRROR

1 4"

G-3

BACK PAINTED GLASS

BENDHEIM HOWE 183

CLEAR MIRROR

304 MASTER BATHROOM

TBD

WHITE BACK PAINTED GLASS

BENDHEIM

KITCHEN CABINETRY

WOOD W-1

KITCHEN CABINETRY

BLEACHED CERUSED OAK

W-2

FLOOR FINISH

EXISTING FLOOR TO REMAIN

W-2

FLOOR FINISH

TO MATCH EXISTING

CUSTOM TO MATCH SAMPLE SAND AND APPLY APPROVED STAIN AND MATTE CLEAR POLYURETHANE SCREEN COAT THROUGHOUT SAND AND APPLY APPROVED STAIN AND MATTE CLEAR POLYURETHANE SCREEN COAT THROUGHOUT

CUSTOM TO MATCH SAMPLE

KITCHEN CABINETRY

EXISTING TO REMAIN

THROUGH-OUT

TO MATCH EXISTING

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

PATCH AND REPAIR WHERE NECESSARY

Design Development

305 MASTER CLOSET, 404 HALLWAY

Bid Document Construction Document Supplemental Information

SPECIAL FINISHES

D.O.B.

SP-1

PUSH PIN SURFACE

TBD

DESK/WORK STATION PIN BOARDS

C-1

CARPET

TBD

DESK/WORK STATION PIN BOARDS

BID SET Seal & Signature:

Date:

Scale:

Title:

FINISH SCHEDULE Sheet No.:

File:

A-006.00 PAGE 17 OF 34

303 WEST 87 STREET

GENERAL NOTES - DEMOLITION PLAN:

NEW YORK, NY 10024

CONTRACTOR SHALL PERFORM ALL OPERATIONS OF DEMOLITION AND REMOVAL INDICATED ON THE DRAWINGS AND AS MAY BE REQUIRED BY THE WORK. ALL WORK SHALL BE DONE CAREFULLY AND NEATLY, IN A SYSTEMATIC MANNER.

Project No.: 13007

dhd

ALL EXISTING SURFACES AND EQUIPMENT TO REMAIN SHALL BE FULLY PROTECTED FROM DAMAGE. THE CONTRACTOR SHALL ASSUME FULL RESPONSIBILITY FOR DAMAGE AND SHALL MAKE REPAIRS REQUIRED WITHOUT ADDITIONAL COST TO THE OWNER. NO DEBRIS SHALL BE ALLOWED TO ACCUMULATE ON THE SITE. DEBRIS SHALL BE REMOVED BY THE CONTRACTOR AS THE JOB PROCEEDS. THE SITE SHALL BE LEFT BROOM CLEAN AT THE COMPLETION OF DEMOLITION. EXISTING ELEVATOR NO WORK

EXISTING ELEVATOR MECH NO WORK

EXISTING STORAGE NO WORK

EXISTING LAUNDRY NO WORK

HWH

CONTRACTOR SHALL REMOVE OR RELOCATE ALL WIRING, PLUMBING, AND MECHANICAL EQUIPMENT AFFECTED BY REMOVAL OF PARTITIONS. REMOVED PIPES/ AND OR LINES SHALL BE CUT TO A POINT OF CONCEALMENT BEHIND OR BELOW FINISH SURFACES, AND SHALL BE PROPERLY CAPPED OR PLUGGED. ALL WORK SHALL MEET APPLICABLE CODES.

HWH

ALL ADJOINING PROPERTY AFFECTED BY ANY OPERATIONS OF DEMOLITION SHALL BE PROTECTED PER THE REQUIREMENTS OF THE LOCAL BUILDING CODE.

CONTRACTOR SHALL PROVIDE, ERECT AND MAINTAIN ALL TEMPORARY BARRIERS AND GUARDS, AND ALL TEMPORARY SHORING AND BRACING AS REQUIRED BY THE DEPARTMENT OF BUILDING RULES AND REGULATIONS. CONTRACTOR SHALL REMOVE ALL ABANDONED MATERIALS, DEVICES, FIXTURES, PIPES, CONDUITS, WIRES, ETC. FROM PREMISES.

REMOVE EXISTING LIGHTING

CONTRACTOR SHALL COMPLY WITH NYC WORKING HOUR REQUIREMENTS REFER TO MEP AND STRUCTURAL ENGINEER'S DRAWINGS FOR DEMOLITION INFORMATION RELATED TO MEP AND STRUCTURAL.

EXISTING MECHANICAL NO WORK EXISTING CELLAR STORAGE

EXISTING POWER ROOM NO WORK

REMOVE EXISTING LIGHTING

EXISTING HALLWAY

architecture interiors

LEGEND EXISTING WALL/ COLUMN TO REMAIN

EXISTING MECHANICAL NO WORK

EXISTING STAIR NO WORK

EXISTING PARTITION WALL, PLUMBING FIXTURE, MILLWORK OR APPLIANCE TO BE REMOVED

EXISTING DOOR TO BE REMOVED

PROTECT AND MAINTAIN EXISTING AREA DRAIN

REMOVE EXISTING STAIRS AND DECK. RETAIN STAIRS FOR RE-USE

CELLAR DEMOLITION PLAN SCALE: 1/4" = 1'-0"

REMOVE EXISTING MANTLE, RELOCATE EXISTING GAS FIRE PLACE

EXISTING BEDROOM

ELEVATOR INTERIOR TO BE REFINISHED.

REMOVE EXISTING WINDOW

REMOVE EXISTING PAVERS

EXISTING ELEVATOR

PROTECT AND MAINTAIN EXISTING AREA DRAIN

NOT IN SCOPE

EXISTING CLOSET NO WORK

PROTECT AND MAINTAIN EXISTING AREA DRAIN

REMOVE EXISTING DOOR AND JAMB

EXISTING LIVING ROOM

REMOVE EXISTING PARTITION

ALIGN

REMOVE DOOR AND JAMB

REMOVE EXISTING LIGHTING THROUGHOUT

EXISTING HALLWAY NO WORK

RETAIN PORTION OF EXISTING DECK

REMOVE EXISTING PAVERS

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

DEMOLITION PLAN 02 BASEMENT SCALE: 1/4" = 1'-0"

Design Development Bid Document Construction Document

EXISTING WINDOW TO BE REMOVED

Supplemental Information D.O.B. REMOVE EXISTING CONVERTOR GRILLE

CAP AND REMOVE EXISTING GAS FIREPLACE, MANTLE AND FLUE

REMOVE EXISTING STAIRS AND DECK. RETAIN STAIRS FOR RE-USE

ELEVATOR INTERIOR TO BE REFINISHED.

BID SET

EXISTING ELEVATOR

Seal & Signature:

EXISTING KITCHEN

EXISTING LIVING

EXISTING PARLOR

EXISTING LIVING

EXISTING DOORS TO TO BE REPLACED

E/P

EXISTING DOORS TO BE REPLACED

EXISTING WINDOWS TO REMAIN

REMOVE EXISTING LIGHTING THROUGHOUT

REMOVE EXISTING ARCH

REMOVE EXISTING CEILING

REMOVE EXISTING PARTITION

EXISTING ELECTRICAL PANEL TO REMAIN

REMOVE EXISTING CEILING REMOVE EXISTING PARTITION & CLOSET INTERIOR

REMOVE EXISTING PARTITION

REMOVE EXISTING KITCHEN CABINETRY. REMOVE EXISTING APPLIANCES, PLUMBING FIXTURES. CAP ALL FIXTURES.

EXISTING KITCHEN

REMOVE EXISTING LIGHTING THROUGHOUT

REMOVE EXISTING CEILING

REMOVE EXISTING DOOR AND JAMB

RETAIN PORTION OF EXISTING DECK

REMOVE EXISTING PARTITION

Date:

Scale:

Title:

FLOOR DEMOLITION PLAN 03 FIRST SCALE: 1/4" = 1'-0"

REMOVE ALL EXISTING TILE, MOLDING, CABINETS, LIGHT FIXTURES AND PLUMBING FIXTURES

CELLAR, BASEMENT AND FIRST FLOOR DEMOLITION PLANS Sheet No.:

File:

A-101.00 PAGE 2 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

EXISTING WINDOW TO BE REMOVED REMOVE ALL EXISTING TILE, MOLDING, CABINETS, LIGHT FIXTURES AND PLUMBING FIXTURES

Project No.: 13007

dhd

GENERAL NOTES - DEMOLITION PLAN: CONTRACTOR SHALL PERFORM ALL OPERATIONS OF DEMOLITION AND REMOVAL INDICATED ON THE DRAWINGS AND AS MAY BE REQUIRED BY THE WORK. ALL WORK SHALL BE DONE CAREFULLY AND NEATLY, IN A SYSTEMATIC MANNER. ALL EXISTING SURFACES AND EQUIPMENT TO REMAIN SHALL BE FULLY PROTECTED FROM DAMAGE. THE CONTRACTOR SHALL ASSUME FULL RESPONSIBILITY FOR DAMAGE AND SHALL MAKE REPAIRS REQUIRED WITHOUT ADDITIONAL COST TO THE OWNER. NO DEBRIS SHALL BE ALLOWED TO ACCUMULATE ON THE SITE. DEBRIS SHALL BE REMOVED BY THE CONTRACTOR AS THE JOB PROCEEDS. THE SITE SHALL BE LEFT BROOM CLEAN AT THE COMPLETION OF DEMOLITION. ALL ADJOINING PROPERTY AFFECTED BY ANY OPERATIONS OF DEMOLITION SHALL BE PROTECTED PER THE REQUIREMENTS OF THE LOCAL BUILDING CODE.

EXISTING MASTER BATHROOM

EXISTING WINDOW TO REMAIN

REMOVE ALL EXISTING TILE, MOLDING, CABINETS, LIGHT FIXTURES AND PLUMBING FIXTURES

EXISTING FIREPLACE TO REMAIN

REMOVE EXISTING DOOR AND JAMB

EXISTING ELECTRICAL PANEL TO RELOCATE

EXISTING MASTER BEDROOM

REMOVE EXISTING WINDOW

CONTRACTOR SHALL PROVIDE, ERECT AND MAINTAIN ALL TEMPORARY BARRIERS AND GUARDS, AND ALL TEMPORARY SHORING AND BRACING AS REQUIRED BY THE DEPARTMENT OF BUILDING RULES AND REGULATIONS.

EXISTING DOORS TO REMAIN

CONTRACTOR SHALL REMOVE ALL ABANDONED MATERIALS, DEVICES, FIXTURES, PIPES, CONDUITS, WIRES, ETC. FROM PREMISES.

REMOVE EXISTING CLOSET INTERIOR

EXISTING BATHROOM

REMOVE EXISTING PARTITION

EXISTING MASTER CLOSET

EXISTING ELEVATOR

ELEVATOR INTERIOR TO BE REFINISHED.

REMOVE EXISTING LIGHTING THROUGHOUT

REMOVE REMOVE EXISTING EXISTING PARTITION DOOR AND JAMB

REFER TO MEP AND STRUCTURAL ENGINEER'S DRAWINGS FOR DEMOLITION INFORMATION RELATED TO MEP AND STRUCTURAL.

REMOVE EXISTING PARTITION

EXISTING WINDOWS TO REMAIN

REMOVE EXISTING CLOSET INTERIOR

EXISTING BEDROOM

REMOVE EXISTING LIGHTING THROUGHOUT

CONTRACTOR SHALL COMPLY WITH NYC WORKING HOUR REQUIREMENTS

REMOVE EXISTING DOOR AND JAMB

CAP AND REMOVE EXISTING GAS FIREPLACE, MANTLE AND FLUE

REMOVE EXISTING DOOR AND JAMB

REMOVE EXISTING PAVERS,WATERPROOFING AND DRAINAGE SYSTEM

architecture interiors

REMOVE EXISTING PARTITION

REMOVE EXISTING MILLWORK

EXISTING WINDOW TO REMAIN

LEGEND EXISTING WALL/ COLUMN TO REMAIN EXISTING PARTITION WALL, PLUMBING FIXTURE, MILLWORK OR APPLIANCE TO BE REMOVED

SECOND FLOOR DEMOLITION PLAN SCALE: 1/4" = 1'-0"

EXISTING DOOR TO BE REMOVED

REMOVE ALL EXISTING TILE, MOLDING, CABINETS, LIGHT FIXTURES AND PLUMBING FIXTURES

EXISTING DOOR TO REMAIN

CAP AND REMOVE EXISTING GAS FIREPLACE, MANTLE AND FLUE

ELEVATOR INTERIOR TO BE REFINISHED.

EXISTING ELEVATOR

EXISTING BATHROOM

EXISTING WINDOW TO BE REMOVED

REMOVE EXISTING PARTITION

CAP AND REMOVE EXISTING GAS FIREPLACE, MANTLE AND FLUE

REMOVE EXISTING PAVERS,WATERPROOFING AND DRAINAGE SYSTEM

EXISTING WINDOWS TO REMAIN REMOVE EXISTING LIGHTING THROUGHOUT

REMOVE EXISTING DOOR AND JAMB

EXISTING BEDROOM EXISTING WINDOW TO REMAIN

REMOVE EXISTING LIGHTING THROUGHOUT

EXISTING BEDROOM REMOVE EXISTING PARTITION REMOVE EXISTING DOOR AND JAMB

EXISTING WINDOW TO REMAIN

REMOVE EXISTING LIGHTING THROUGHOUT

REMOVE EXISTING CLOSET INTERIOR

EXISTING ELECTRICAL PANEL TO RELOCATE

REMOVE EXISTING PARTITION

REMOVE EXISTING CLOSET INTERIOR

REMOVE EXISTING DOOR AND JAMB

EXISTING WINDOW TO REMAIN

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

FLOOR DEMOLITION PLAN 02 THIRD SCALE: 1/4" = 1'-0"

Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

SECOND AND THIRD FLOOR DEMOLITION PLANS Sheet No.:

File:

A-102.00 PAGE 3 OF 34

GENERAL NOTES - CONSTRUCTION PLAN: 1. CONTRACTOR SHALL INSTALL ALL KITCHEN APPLIANCES TO MANUFACTURERS SPECIFICATIONS. 2. CONTRACTOR SHALL FURNISH AND INSTALL ALL HARDWARE, PLUMBING FIXTURES AND LIGHT FIXTURES UNLESS NOTED OTHERWISE.

303 WEST 87 STREET

3. CONTRACTOR SHALL KEEP FULLY CHARGED HAND FIRE EXTINGUISHERS ON SITE AT ALL TIMES DURING OPERATIONS. 4. CONTRACTOR SHALL REPLACE ALL PLUMBING LINES TO RISERS WITH

NEW YORK, NY 10024

COPPER PIPE.

Project No.: 13007

5. CONTRACTOR SHALL PROVIDE PAINT ON LATICRETE WATERPROOFING BELOW TILE FLOORS IN BATHROOM. THE MEMBRANE SHALL EXTEND UP THE ADJOINING WALLS A MINIMUM OF SIX INCHES, PER MULTIPLE DWELLING LAW REQUIREMENTS. REFER TO WATERPROOFING DETAILS FOR MORE INFORMATION. 6. CONTRACTOR SHALL BUILD BATHROOM WITH NEW STUD WALLS LINED WITH AND GREENROCK IN ALL OTHER AREAS.

WONDER BOARD IN WET AREAS

dhd

ELEVATOR 010

DRYER

STORAGE ELEVATOR MECH

EXISTING

7. CONTRACTOR SHALL PROVIDE 4" PLYWOOD BLOCKING AT ALL SINK AND BATH ACCESSORIES LOCATIONS. CONTRACTOR SHALL PROVIDE ALL BLOCKING REQUIRED BY ARCHITECT.

WASH

004

D-005

003

EXISTING

8. CONTRACTOR SHALL LOCATE PLUMBING SHUT OFF VALVES, ACCESS DOORS, AND PANELS REQUIRED FOR ALL PLUMBING SHUT OFF VALVES.

HWH

LAUNDRY 007

D-001

9. CONTRACTOR SHALL INSTALL HARD WIRED SMOKE/ CARBON MONOXIDE DETECTORS PER MULTIPLE DWELLING LAW REQUIREMENTS. REFER TO T-001 FOR MORE INFORMATION.

D-006

009

D-002

CELLAR STORAGE

HWH

EXISTING

D-004

EXISTING

001

CONSTRUCTION NOTES:

BOILER ROOM 008

101

NEW WASHER AND DRYER AT NEW ROUGH.

102

NEW UNDER MOUNT SINK AT RELOCATED ROUGH WITH SCHEDULED DECK MOUNTED FAUCET.

103

NEW FLOOR MOUNTED TOILET AT RELOCATED ROUGH.

104

NEW DROP IN TUB AT RELOCATED ROUGH WITH WALL MOUNT TUB FILLER AND SHOWER HEAD AT RELOCATED ROUGH.

architecture interiors

HALLWAY BATHROOM 1

002

D-007

EXISTING EXISTING

006 EXISTING

D-009

NEW WASHER AND DRYER AT NEW ROUGHS

106

NEW UNDER MOUNT TUB AT EXISTING ROUGH WITH WALL MOUNT TUB FILLER, HAND SHOWER AND CONTROLS.

107

NEW GLASS SHOWER ENCLOSURE AND SHOWER AT EXISTING ROUGH WITH SCHEDULED WALL MOUNTED SHOWER HEAD AND HANDSHOWER. BUILD UP SHOWER FLOOR AND CURB AS REQUIRED FOR PROPER PITCH.

108

EXISTING GAS FIREPLACE TO REMAIN

109

EXISTING ELECTRICAL PANEL TO REMAIN

110

SCHEDULED INTEGRATED UNDER COUNTER BEVERAGE REFRIGERATOR

111

SCHEDULED UNDER COUNTER BEVERAGE REFRIGERATOR WITH ICE MAKER

112

SCHEDULED SINK, DECK MOUNT FAUCET AND WATER FILTER

113

SCHEDULED INTEGRATED DISHWASHER

114

SCHEDULED 42" REFRIGERATOR/FREEZER W ICE MAKER

D-008

116

SCHEDULED 48" GAS RANGE AND CUSTOM 48" HOOD

117

CLOSET INTERIOR BY OTHERS

118

RE-USE STEEL STAIR, DECK AND HANDRAIL

119

CUSTOM MILLWORK DESK AND STORAGE UNIT

005

011

D-003

EXISTING

CONSTRUCTION PLAN 01 CELLAR SCALE: 1/4" = 1'-0" 01 A301

128

144

W-101

138

ELEVATOR

AREA WAY

105

108

D-102

D-104

SCHEDULED MICROWAVE

132

124

110

133

111

121

123

23'-921"

3'-741"

3'-1121"

31'-441" V.I.F.

123

W-102

NOT IN SCOPE

CL 104

D-101

PLAYROOM

16'-10" V.I.F.

D-103

133

NEW GAS FIREPLACE ON RELOCATED ROUGH, WITH CUSTOM SURROUND

134

CLOSET, INTERIORS BY OTHERS

135

CUSTOM MILLWORK BATHROOM CABINETRY

136

RE-SEAL, WATERPROOF, INSTALL NEW DRAINAGE SYSTEM AND PAVERS. RE-TAIN COPING IF POSSIBLE.

137

CUSTOM BUILT IN BOOTH SEATING

138

6' HIGH PERIMETER FENCE

139

NEW BASEBOARD TO MATCH EXISTING

138

W-204

REAR YARD BELOW

141

RELOCATE EXISTING HOSE BIB

145

NEW RADIATOR TO REPLACE CONVECTOR GRILLE

116 KITCHEN

126

112

203

113

201

UP 207

Seal & Signature:

139 W-202

117

205

D-202

3'-1"

208

2'-2"

AREA WAY BELOW

LIVING

109

2'-0"

2'-8"

2'-0"

W-203

ALIGN D-203

139 D-205

2'-821"

2'-8"

3'-3"

139

ENTRY 206

119

103

122

131

16'-6" POWDER 204

7'-821"

UP D-201

Date:

Scale:

Title: 01 A304

EXISTING WALL NEW FULL HEIGHT GWB PARTITION WITH SOUND ATTENUATION INSULATION; STUDS AT 16" O/C WITH 5 8" SHEETROCK TO BOTH FACES NEW MILLWORK; DETAILS TO FOLLOW

BID SET

CLOSET

D-204

114

8'-0"

D.O.B.

W-201

HALL

6'-2"

LEGEND

209

8'-5" 115

202

BALCONY

20'-4" V.I.F.

130

DINING

118

11'-4"

3'-5"

NEW LADDER

144

12'-2" V.I.F.

ALIGN

CUSTOM MILLWORK BENCH

143

137

ELEVATOR

129

145

NEW SCHEDULED WALL MOUNTED SHOWER HEAD, HANDSHOWER, PRESSURE BALANCE VALVE, TUB SPOUT AND CURTAIN ROD SCHEDULED STEAM UNIT

Supplemental Information

140

142

Construction Document

E/P

SCHEDULED SINK AND DECK MOUNT FAUCET

Date

Bid Document

01 A302

4'-234"

132

06.13.13

Issue

SCALE: 1/4" = 1'-0"

2'-3"

SCHEDULED PEDESTAL SINK WITH DECK MOUNTED FAUCET

BID SET

Schematic Design

4'-3"

131

01 No.

Design Development

3'-3"

SCHEDULED UNDER COUNTER INTEGRATED WINE FRIDGE

107

BASEMENT CONSTRUCTION PLAN

7'-1"

130

16'-10" V.I.F.

SCHEDULED POT FILLER

2'-3"

NEW BBQ GAS LINE AT NEW ROUGH

129

1'-10"

128

D-106

PHASE: Predesign Service

8'-734"

NEW HOSE BIB AT NEW ROUGH

5'-743"

SCHEDULED PULL OUT TRASH

127

126

8'-141"

RELOCATE EXISTING ELECTRICAL PANEL

106

D-105

V.I.F.

4'-1"

125

ENTRY

VESTIBULE

139

12'-934"

4'-734"

SCHEDULED DISHWASHER DRAWER

C UP

124

103

122

118

NEW BLUESTONE PAVERS AND DRAINAGE SYSTEM

4'-6"

EXISTING STAIR AND HANDRAIL

123

D-107

HALLWAY

16'-10" V.I.F.

122

W-103

7'-841"

CUSTOM MILLWORK MEDIA UNIT

ALIGN

121

2'-6"

17'-7"

CUSTOM MILLWORK DESK AND MEDIA UNIT

22'-221"

102

120

MECH

105

115

122

FLOOR CONSTRUCTION PLAN 03 FIRST SCALE: 1/4" = 1'-0"

NEW HARD WIRED SMOKE/ CARBON MONOXIDE DETECTOR; REFER TO T-001 FOR SMOKE/ CARBON MONOXIDE DETECTOR NOTES

CELLAR, BASEMENT AND FIRST FLOOR CONSTRUCTION PLANS Sheet No.:

File:

A-103.00 PAGE 4 OF 34

303 WEST 87 STREET

3. CONTRACTOR SHALL KEEP FULLY CHARGED HAND FIRE EXTINGUISHERS ON SITE AT ALL TIMES DURING OPERATIONS. 4. CONTRACTOR SHALL REPLACE ALL PLUMBING LINES TO RISERS WITH

NEW YORK, NY 10024 01 A306

COPPER PIPE.

01 A307

01 A308

Project No.: 13007

134

305

139 125

2'-7" EQ.

10"

SCHEDULED 42" REFRIGERATOR/FREEZER W ICE MAKER

115

SCHEDULED MICROWAVE

116

SCHEDULED 48" GAS RANGE AND CUSTOM 48" HOOD

534" 405

134

119

D-407

CUSTOM MILLWORK DESK AND MEDIA UNIT

121

CUSTOM MILLWORK MEDIA UNIT

122

EXISTING STAIR AND HANDRAIL

1'-541"

W-405

2'-8"

HALLWAY

139

134

SCHEDULED DISHWASHER DRAWER

125

SCHEDULED PULL OUT TRASH

127

NEW HOSE BIB AT NEW ROUGH

128

NEW BBQ GAS LINE AT NEW ROUGH

129

SCHEDULED POT FILLER

130

SCHEDULED UNDER COUNTER INTEGRATED WINE FRIDGE

131

SCHEDULED PEDESTAL SINK WITH DECK MOUNTED FAUCET

132

SCHEDULED SINK AND DECK MOUNT FAUCET

133

NEW GAS FIREPLACE ON RELOCATED ROUGH, WITH CUSTOM SURROUND

134

CLOSET, INTERIORS BY OTHERS

135

CUSTOM MILLWORK BATHROOM CABINETRY

136

RE-SEAL, WATERPROOF, INSTALL NEW DRAINAGE SYSTEM AND PAVERS. RE-TAIN COPING IF POSSIBLE.

137

CUSTOM BUILT IN BOOTH SEATING

138

6' HIGH PERIMETER FENCE

139

NEW BASEBOARD TO MATCH EXISTING

140

CUSTOM MILLWORK BENCH

141

NEW SCHEDULED WALL MOUNTED SHOWER HEAD, HANDSHOWER, PRESSURE BALANCE VALVE, TUB SPOUT AND CURTAIN ROD

142

SCHEDULED STEAM UNIT

143

NEW LADDER

144

RELOCATE EXISTING HOSE BIB

145

NEW RADIATOR TO REPLACE CONVECTOR GRILLE

NEW HARD WIRED SMOKE/ CARBON MONOXIDE DETECTOR; REFER TO T-001 FOR SMOKE/ CARBON MONOXIDE DETECTOR NOTES

W-403

13'-621" V.I.F.

2'-0" 139 D-402

5'-0"

E/P

LINEN 406

143

134

119

W-404

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development

SCALE: 1/4" = 1'-0"

Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

SECOND AND THIRD FLOOR CONSTRUCTION PLANS

EXISTING WALL

1'-421"

BEDROOM 1

134

THIRD FLOOR CONSTRUCTION PLAN

LEGEND NEW FULL HEIGHT GWB PARTITION WITH SOUND ATTENUATION INSULATION; STUDS AT 16" O/C WITH 5 8" SHEETROCK TO BOTH FACES NEW MILLWORK; DETAILS TO FOLLOW

122

DN D-401

16'-741" V.I.F.

RELOCATE EXISTING ELECTRICAL PANEL

126

3'-721"

13'-4" 125

D-411

W-402

140

408

101

W-406

2'-521"

LAUNDRY 2

BEDROOM 2

7'-1"

NEW BLUESTONE PAVERS AND DRAINAGE SYSTEM

124

D-409

407

1'-721" D-404

404

402

123

104

2'-8"

3'-1141"

D-406

C 139

D-403

11'-9"

W-401

ALIGN

141

102

6'-1041"

120

D-405

1'-4"

11'-541"

11'-8"

CUSTOM MILLWORK DESK AND STORAGE UNIT

403

103

D-410

16'-10" V.I.F.

RE-USE STEEL STAIR, DECK AND HANDRAIL

119

3'-121"

BATHROOM 3

135

2'-0"

CLOSET INTERIOR BY OTHERS

118

1'-8"

334" ELEVATOR

14'-741"

401

136

117

2'-8"

7'-2"

8'-4" 127

TERRACE

01 A310

1'-0"

SCHEDULED INTEGRATED DISHWASHER

114

01 A309

16'-621" V.I.F.

113

05 A310

9'-4"

SCHEDULED SINK, DECK MOUNT FAUCET AND WATER FILTER

FLOOR CONSTRUCTION PLAN 01 SECOND SCALE: 1/4" = 1'-0"

3'-6"

112

302

3'-7"

SCHEDULED UNDER COUNTER BEVERAGE REFRIGERATOR WITH ICE MAKER

LINEN

341"

111

W-304

14'-1"

3'-0"

SCHEDULED INTEGRATED UNDER COUNTER BEVERAGE REFRIGERATOR

120

110

6'-534"

EXISTING ELECTRICAL PANEL TO REMAIN

1'-4"

EXISTING GAS FIREPLACE TO REMAIN

109

D-308

8'-6"

108

architecture interiors

2'-8" V.I.F.

2'-0"

W-303

139

D-301

2'-4"

NEW GLASS SHOWER ENCLOSURE AND SHOWER AT EXISTING ROUGH WITH SCHEDULED WALL MOUNTED SHOWER HEAD AND HANDSHOWER. BUILD UP SHOWER FLOOR AND CURB AS REQUIRED FOR PROPER PITCH.

301

16'-441" V.I.F.

11'-9"

303

5'-4"

641"

107

139

HALLWAY

122

16'-1141" V.I.F.

STUDY

D-310

136

2'-8"

D-304

D-303

2'-1121"

106

135

1'-0"

NEW WASHER AND DRYER AT NEW ROUGHS NEW UNDER MOUNT TUB AT EXISTING ROUGH WITH WALL MOUNT TUB FILLER, HAND SHOWER AND CONTROLS.

305

102

2'-621"

105

134

D-307

TERRACE

4'-11"

NEW FLOOR MOUNTED TOILET AT RELOCATED ROUGH. NEW DROP IN TUB AT RELOCATED ROUGH WITH WALL MOUNT TUB FILLER AND SHOWER HEAD AT RELOCATED ROUGH.

6'-5"

304

15'-941"

104

W-302

139

107

MASTER BATHROOM

D-302

307

NEW UNDER MOUNT SINK AT RELOCATED ROUGH WITH SCHEDULED DECK MOUNTED FAUCET.

103

4'-5"

9'-8"

2'-6" D-309

821"

MASTER BEDROOM

127

1'-1"

15'-5" 16'-10" V.I.F.

NEW WASHER AND DRYER AT NEW ROUGH.

4'-3"

3'-0"

106

D-306

117

1'-8"

W-305

139

103

CONSTRUCTION NOTES: 102

306

dhd

W-301

142

ELEVATOR

1'-1134"

D-305

9. CONTRACTOR SHALL INSTALL HARD WIRED SMOKE/ CARBON MONOXIDE DETECTORS PER MULTIPLE DWELLING LAW REQUIREMENTS. REFER TO T-001 FOR MORE INFORMATION.

101

D-311

2'-8"

8. CONTRACTOR SHALL LOCATE PLUMBING SHUT OFF VALVES, ACCESS DOORS, AND PANELS REQUIRED FOR ALL PLUMBING SHUT OFF VALVES.

108

E/P

7. CONTRACTOR SHALL PROVIDE 4" PLYWOOD BLOCKING AT ALL SINK AND BATH ACCESSORIES LOCATIONS. CONTRACTOR SHALL PROVIDE ALL BLOCKING REQUIRED BY ARCHITECT.

2'-0"

MASTER CLOSET

1'-621"

WONDER BOARD IN WET AREAS

5'-2"

2'-7" EQ.

2'-10"

6. CONTRACTOR SHALL BUILD BATHROOM WITH NEW STUD WALLS LINED WITH AND GREENROCK IN ALL OTHER AREAS.

10"

Sheet No.:

ROOF FLOOR CONSTRUCTION PLAN SCALE: 1/4" = 1'-0"

File:

A-104.00 PAGE 5 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

GENERAL NOTES - REFLECTED CEILING PLAN:

Project No.: 13007

UNLESS OTHERWISE NOTED:

dhd

1. ELECTRICIAN SHALL SUPPLY AND INSTALL ALL NEW LUTRON DIVA DECORA SWITCHES THROUGHOUT WITH SCREWLESS PLATES. WHITE UNLESS OTHERWISE NOTED. ALL FIXTURES SHALL BE ON DIMMERS. ELEVATOR

2. REFER TO ELEVATIONS FOR SCONCE MOUNTING LOCATIONS; VERIFY IN FIELD WITH ARCHITECT AND OWNER PRIOR TO INSTALLATION.

STORAGE

010 ELEVATOR MECH

004

003

3. PAINT ALL CEILINGS AND SOFFITS; REFER TO FINISH SCHEDULE FOR MORE INFORMATION. 4. REFER TO LIGHTING SCHEDULE AND FIXTURE SPECIFICATIONS FOR INFORMATION.

LAUNDRY

5. ALL ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICIAN. c

6. GC SHALL SUPPLY LAMPS FOR ALL LIGHT FIXTURES, INCLUDING OWNER SUPPLIED FIXTURES AS NEEDED.

CELLAR STORAGE

007

CL 009

001

EXISTING CEILING: 8'-6" AFF

8. NO STRUCTURAL ELEMENTS SHALL BE REMOVED AND NO EXTERIOR MASONRY WALLS SHALL BE PENETRATED WITHOUT EXPRESS WRITTEN CONSENT OF THE BUILDING. THERE SHALL BE NO CUTTING, CHANNELING, REMOVAL OR MODIFICATION OF STRUCTURAL ELEMENTS OF THE BUILDING UNLESS CLEARLY NOTED, APPROVED BY THE BOARD, AND PROPERLY SHORED, REINFORCED OR REPLACED.

7. FEASIBILITY OF EXISTING CEILING LIGHT RELOCATION SHOWN TO BE DETERMINED IN FIELD

BOILER ROOM

EX EX

HALLWAY 002

008 BATHROOM 1

006

architecture interiors

S EQ.

EXISTING CEILING: 9'-6" AFF

EQ.

EX 2

LEGEND

011

TO UPSTAIRS LANDING

3 3

005

S SS

NEW DROPPED CEILING; REFER TO DETAIL 02 THIS SHEET NEW HARD WIRED SMOKE/ CARBON MONOXIDE DETECTOR; REFER TO A-001 FOR SMOKE/ CARBON MONOXIDE DETECTOR NOTES

S S

MECH

EXISTING HARDWIRED SMOKE/CARBON MONOXIDE DETECTOR. CONTRACTOR SHALL TEST FOR FUNCTIONALITY AND REPLACE IF REQUIRED. NEW RECESSED FIXTURE

EXISTING RECESSED FIXTURE

CELLAR REFLECTED CEILING PLAN SCALE: 1/4" = 1'-0"

NEW SURFACE MOUNTED FIXTURE NEW WALL MOUNTED SCONCE FIXTURE EXISTING WALL MOUNTED SCONCE FIXTURE

C L

ELEVATOR

AREA WAY

105

108

16 10

16 9a

NOT IN SCOPE

4'-4" EQ.

104

PLAYROOM

4'-4" EQ.

16 10

EXISTING CEILING: 8'-0" AFF

102

HALLWAY

103

EQ.

VESTIBULE

ENTRY 107

106

TO UPSTAIRS LANDING

16 TO DOWNSTAIRS LANDING

3 333

S SSS

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

REFLECTED CEILING PLAN 02 BASEMENT SCALE: 1/4" = 1'-0"

Design Development Bid Document Construction Document Supplemental Information UNDERCABINET LED 7

EQ.

ELEVATOR

1" 4'-42

209

2 KITCHEN

202

1'-11" 5

3'-83" 4

4'-0" EQ.

2 C

EQ.

1'-6"

1'-6" C L

204

EXISTING CEILING: 11'-8" AFF

EQ.

EXISTING CEILING: 10'-12" AFF

POWDER

ENTRY

206

BID SET Seal & Signature:

EQ. 7

201

205

C L

HALL

SS S 2

2 LIVING

208

EXISTING CEILING: 11'-7" AFF

BALCONY

EQ.

1'-11" 5

2'-81" 4 TYP.

3'-9"

4'-0" EQ.

DINING

3 3

3'-0" TYP.

EQ.

203

3'-0" TYP.

207

E/P

CLOSET

5 2

EQ. 2

D.O.B.

3'-0" TYP.

C L

5'-11 1" 4

TO UPSTAIRS LANDING

Date:

8 EX

FLOOR REFLECTED CEILING PLAN 03 FIRST SCALE: 1/4" = 1'-0"

Scale:

Title:

CELLAR, BASEMENT AND FIRST FLOOR REFLECTED CEILING PLAN Sheet No.:

File:

A-105.00 PAGE 6 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

GENERAL NOTES - REFLECTED CEILING PLAN:

Project No.: 13007

UNLESS OTHERWISE NOTED:

dhd

4. REFER TO LIGHTING SCHEDULE AND FIXTURE SPECIFICATIONS FOR INFORMATION.

6. GC SHALL SUPPLY LAMPS FOR ALL LIGHT FIXTURES, INCLUDING OWNER SUPPLIED FIXTURES AS NEEDED.

S C L

307

304

NEW DROPPED CEILING; REFER TO DETAIL 02 THIS SHEET

STUDY 303

3 3

TO DOWNSTAIRS CIRC.

6'-0" EQ.

301

6'-0" EQ.

LINEN 302

architecture interiors

NEW HARD WIRED SMOKE/ CARBON MONOXIDE DETECTOR; REFER TO A-001 FOR SMOKE/ CARBON MONOXIDE DETECTOR NOTES

S S

HALLWAY

3'-0" EQ.

EXISTING CEILING: 10'-6" AFF

305

LEGEND

C L

1'-81" 2

2 6

TERRACE

3'-0" EQ.

MASTER BATHROOM

EXISTING CEILING: 8'-7" AFF

MASTER BEDROOM

1'-81" 2

SS S

7. FEASIBILITY OF EXISTING CEILING LIGHT RELOCATION SHOWN TO BE DETERMINED IN FIELD

C L

EXISTING CEILING: 10'-6" AFF

1" 3'-74 TYP.

EXISTING CEILING: 10'-5" AFF

3 33

5. ALL ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICIAN.

1" 3'-52

1" 4'-112 EQ.

2'-6" EQ.

305

306

2'-6" EQ.

3. PAINT ALL CEILINGS AND SOFFITS; REFER TO FINISH SCHEDULE FOR MORE INFORMATION.

ELEVATOR

33 3

1" 4'-112 EQ.

MASTER CLOSET

C L

3'-81" 4

E/P

2. REFER TO ELEVATIONS FOR SCONCE MOUNTING LOCATIONS; VERIFY IN FIELD WITH ARCHITECT AND OWNER PRIOR TO INSTALLATION.

1'-81" 4

1. ELECTRICIAN SHALL SUPPLY AND INSTALL ALL NEW LUTRON DIVA DECORA SWITCHES THROUGHOUT WITH SCREWLESS PLATES. WHITE UNLESS OTHERWISE NOTED. ALL FIXTURES SHALL BE ON DIMMERS.

EXISTING HARDWIRED SMOKE/CARBON MONOXIDE DETECTOR. CONTRACTOR SHALL TEST FOR FUNCTIONALITY AND REPLACE IF REQUIRED. NEW RECESSED FIXTURE

EXISTING RECESSED FIXTURE

FLOOR REFLECTED CEILING PLAN 01 SECOND SCALE: 1/4" = 1'-0"

NEW SURFACE MOUNTED FIXTURE

16 2

9b c

5'-01" 4

EQ.

4'-31" 2

EQ.

4 3

c 2

E/P

EXISTING CEILING: 11'-321" AFF

15 EQ.

9c 2

TO DOWNSTAIRS HALLWAY CIRC.

DN 2

407

408

EXISTING CEILING: 9'-5" AFF

LAUNDRY 2

BEDROOM 1

BEDROOM 2 402

404

EQ.

EXISTING CEILING: 9'-5" AFF

HALLWAY

403

EQ.

401

9c BATHROOM 3

9c LINEN 406

EQ. 3" 4'-94 EQ. EQ.

TERRACE

405

ELEVATOR

EXISTING WALL MOUNTED SCONCE FIXTURE

NEW WALL MOUNTED SCONCE FIXTURE EX

4'-93 4" EQ.

EXISTING CEILING: 11'-321" AFF

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service

Schematic Design

THIRD FLOOR REFLECTED CEILING PLAN

Design Development

SCALE: 1/4" = 1'-0"

Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

SECOND AND THIRD FLOOR REFLECTED CEILING PLANS

Sheet No.:

File:

A-106.00 PAGE 7 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

GENERAL NOTES - FINISH FLOOR PLAN:

dhd

ELEVATOR STORAGE

010 ELEVATOR MECH

004

003

EXISTING

LAUNDRY 007

EXISTING

009 W-2 CELLAR STORAGE 001

ALL NEW BASEBOARD & SHOE MOLDING WHERE REQUIRED. REFER TO SCHEDULE FOR SPECIFICATIONS.

W-2

BOILER ROOM 008 EXISTING

HALLWAY

architecture interiors

BATHROOM 1

002

006

W-2

EXISTING

MECH CL

GRASS BORDER

005

011

EXISTING

CELLAR REFLECTED CEILING PLAN SCALE: 1/4" = 1'-0"

ELEVATOR

AREA WAY

105

108

REPLACE EXISTING CONVERTOR GRILLE

T-6

NOT IN SCOPE

CL 104

T-6 PLAYROOM

W-2

102 W-2

REPLACE EXISTING CONVERTOR GRILLE HALLWAY 103

W-2 ENTRY

VESTIBULE

W-2

107

T-6

106

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

REFLECTED CEILING PLAN 02 BASEMENT SCALE: 1/4" = 1'-0"

Design Development Bid Document Construction Document Supplemental Information D.O.B.

ELEVATOR 209

CLOSET

BID SET

AREAWAY BELOW

207

Seal & Signature:

W-2 KITCHEN 203 LIVING

E/P

REAR YARD BELOW

205 W-2

202

T-3

HALL

T-3

208

W-2 REPLACE EXISTING CONVERTOR GRILLE

DINING

NEW WOOD BORDER

S-2 ENTRY 206

BALCONY

POWDER 204

FLOOR REFLECTED CEILING PLAN 03 FIRST SCALE: 1/4" = 1'-0"

T-3

201

W-2

Date:

Scale:

Title:

CELLAR, BASEMENT AND FIRST FLOOR FLOOR FINISH PLAN Sheet No.:

File:

A-107.00 PAGE 8 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

GENERAL NOTES - FINISH FLOOR PLAN:

dhd

ELEVATOR 306

MASTER CLOSET 305

T-1 C-1

E/P

MASTER BATHROOM 304

S-2

S-2 STUDY 303

MASTER BEDROOM

architecture interiors

W-2

307 W-2

ALL NEW BASEBOARD & SHOE MOLDING WHERE REQUIRED. REFER TO SCHEDULE FOR SPECIFICATIONS.

HALLWAY TERRACE

301

305

W-2

T-6

LINEN W-2

302

W-2

FLOOR REFLECTED CEILING PLAN 01 SECOND SCALE: 1/4" = 1'-0"

ELEVATOR 405

BATHROOM 3 403

TERRACE 401

T-5

T-6

BEDROOM 1 407 HALLWAY

LAUNDRY 2

S-2

W-2

408

404

W-3

BEDROOM 2 402 W-2

E/P

LINEN W-2

406

W-3

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service

Schematic Design

THIRD FLOOR REFLECTED CEILING PLAN

Design Development

SCALE: 1/4" = 1'-0"

Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

SECOND AND THIRD FLOOR FLOOR FINISH PLANS

Sheet No.:

File:

A-108.00 PAGE 9 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

ELECTRICAL PLAN GENERAL NOTES:

Project No.: 13007

dhd

UNLESS NOTED OTHERWISE:

STORAGE

010 ELEVATOR MECH

004

EX.

ELEVATOR

2. ALL NEW OUTLETS AND SWITCHES SHALL BE LUTRON DIVA DECORA STYLE, COLOR: WHITE (UNLESS OTHERWISE NOTED- COLOR MAY VARY), WITH SCREWLESS PLATES.

EX.

1. ALL ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICIAN.

EX.

003

3. ALL DATA/TELEPHONE CABLES SHALL BE CAT 6. 4. ALL RECEPTACLES SHALL BE VERTICALLY MOUNTED AT 15 1/2" AFF TO MATCH EXISTING UNLESS OTHERWISE NOTED. ALL SWITCHES SHALL BE AT 45 1/2" AFF TO MATCH EXISTING UNLESS OTHERWISE NOTED. COORDINATE WITH MANUFACTURER'S RECOMMENDATIONS FOR ALL APPLIANCE POWER LOCATIONS.

007

EX.

CELLAR STORAGE

EX.

001

6. LOCATE CONVENIENCE OUTLETS AS REQUIRED BY CODE.

EX.

5. ALL BATHROOM OUTLETS SHALL BE G.F.I. DEVICES. ALL OTHER OUTLETS SHALL BE ON AN ARC FAULT BREAKERS AS REQUIRED BY CODE.

LAUNDRY

EX.

CL 009

BOILER ROOM 008

HALLWAY 002

7. RETAIN ALL EXISTING SWITCH AND OUTLET LOCATIONS WHERE POSSIBLE IF IT BENEFITS COST. FINAL OUTLET AND LOW VOLTAGE RECEPTACLE LOCATIONS SHALL BE DETERMINED IN FIELD WITH OWNER AND ARCHITECT.

architecture interiors

BATHROOM 1 006

EX.

8. CO-ORDINATE WITH A/ VENDOR FOR A/V SCOPE AND REQUIREMENTS. ALL TV OUTLET HEIGHTS SHALL BE VERIFIED IN FIELD.

MECH

9. CONTRACTOR SHALL VERIFY WHETHER ALL EXISTING OUTLETS MUST BE REPLACED WITH TAMPER-PROOF RECEPTACLES.

005

011

EX.

ELECTRICAL LEGEND DEDICATED APPLIANCE OUTLET; VERIFY LOCATION AND SIZE WITH MANUFACTURER'S SPECIFICATIONS

DUPLEX RECEPTACLE QUAD RECEPTACLE

CELLAR REFLECTED CEILING PLAN SCALE: 1/4" = 1'-0"

GFI DUPLEX G.F.I. MOUNTED AT 39" AFF U.N.O.; REFER TO ELEVATIONS FOR HEIGHTS

LOW VOLTAGE POINT TELEPHONE JACK- CAT 6 CABLE TV

REF.

DISH WASHER

EX.

ELECTRICAL PANEL

GFI

ELEVATOR

AREA WAY

105

108

NOT IN SCOPE

CL 104 PLAYROOM

EX.

102

EX.

HALLWAY 103

ENTRY

106

107

EX.

VESTIBULE

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

REFLECTED CEILING PLAN 02 BASEMENT SCALE: 1/4" = 1'-0"

Design Development Bid Document Construction Document

EX.

209

EX.

RANGE HOOD

EX.

D.O.B.

ELEVATOR

GFI

MICRO.

EX.

Supplemental Information

BID SET

CLOSET 207

REF.

Seal & Signature:

REF.

202

205

DISH.

EX.

DINING

LIVING

E/P

203

(2) GFI

KITCHEN

HALL 208

EX.

ENTRY 206

BALCONY

204

EX.

POWDER

EX.

PENCIL DRAWER

EX.

FLOOR REFLECTED CEILING PLAN 03 FIRST SCALE: 1/4" = 1'-0"

GFI

201

E/P

Date:

Scale:

Title:

CELLAR, BASEMENT AND FIRST FLOOR POWER PLAN Sheet No.:

File:

A-109.00 PAGE 10 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd

UNLESS NOTED OTHERWISE:

EX.

ELECTRICAL PLAN GENERAL NOTES:

ELEVATOR

1. ALL ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICIAN.

306

MASTER CLOSET 305

2. ALL NEW OUTLETS AND SWITCHES SHALL BE LUTRON DIVA DECORA STYLE, COLOR: WHITE (UNLESS OTHERWISE NOTED- COLOR MAY VARY), WITH SCREWLESS PLATES. 3. ALL DATA/TELEPHONE CABLES SHALL BE CAT 6. E/P

MASTER BATHROOM

GFI

304

4. ALL RECEPTACLES SHALL BE VERTICALLY MOUNTED AT 15 1/2" AFF TO MATCH EXISTING UNLESS OTHERWISE NOTED. ALL SWITCHES SHALL BE AT 45 1/2" AFF TO MATCH EXISTING UNLESS OTHERWISE NOTED. COORDINATE WITH MANUFACTURER'S RECOMMENDATIONS FOR ALL APPLIANCE POWER LOCATIONS.

STUDY 303

5. ALL BATHROOM OUTLETS SHALL BE G.F.I. DEVICES. ALL OTHER OUTLETS SHALL BE ON AN ARC FAULT BREAKERS AS REQUIRED BY CODE.

MASTER BEDROOM 307

EX.

6. LOCATE CONVENIENCE OUTLETS AS REQUIRED BY CODE.

architecture interiors

EX.

HALLWAY TERRACE

301

305

EX. LINEN

EX.

8. CO-ORDINATE WITH A/ VENDOR FOR A/V SCOPE AND REQUIREMENTS. ALL TV OUTLET HEIGHTS SHALL BE VERIFIED IN FIELD.

7. RETAIN ALL EXISTING SWITCH AND OUTLET LOCATIONS WHERE POSSIBLE IF IT BENEFITS COST. FINAL OUTLET AND LOW VOLTAGE RECEPTACLE LOCATIONS SHALL BE DETERMINED IN FIELD WITH OWNER AND ARCHITECT.

302

9. CONTRACTOR SHALL VERIFY WHETHER ALL EXISTING OUTLETS MUST BE REPLACED WITH TAMPER-PROOF RECEPTACLES.

ELECTRICAL LEGEND DEDICATED APPLIANCE OUTLET; VERIFY LOCATION AND SIZE WITH MANUFACTURER'S SPECIFICATIONS

FLOOR REFLECTED CEILING PLAN 01 SECOND SCALE: 1/4" = 1'-0"

DUPLEX RECEPTACLE QUAD RECEPTACLE GFI DUPLEX G.F.I. MOUNTED AT 39" AFF U.N.O.; REFER TO ELEVATIONS FOR HEIGHTS

E/P

401

EX.

405

BATHROOM 3 403

TERRACE

TELEPHONE JACK- CAT 6 CABLE

ELEVATOR

PENCIL DRAWER

LOW VOLTAGE POINT

ELECTRICAL PANEL

EX.

BEDROOM 1 407

EX.

BEDROOM 2

HALLWAY

LAUNDRY 2

404

408

WASHER DRYER

EX.

402 E/P

EX.

406

PENCIL DRAWER

LINEN

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service

Schematic Design

THIRD FLOOR REFLECTED CEILING PLAN

Design Development

SCALE: 1/4" = 1'-0"

Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

SECOND AND THIRD FLOOR POWER PLANS

Sheet No.:

File:

A-110.00 PAGE 11 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd

architecture interiors

10'-10"

NEW EXTERIOR LIGHTS

EXISTING REAR ELEVATION SCALE: 1/4" = 1'-0"

PROPOSED REAR ELEVATION SCALE: 1/4" = 1'-0"

7'-2"

12'-1"

8'-1141"

1'-11"

3'-10"

9'-5"

12'-1"

7'-2"

PROPOSED REAR SECTION

BID SET

06.10.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design

SCALE: 1/4" = 1'-0"

Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

REAR ELEVATION

Sheet No.:

File:

A-201.00 PAGE 18 OF 34

01 A301

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

10"

2'-0"

dhd D-102

D-104

132 141"

2'-0"

124 2'-0"

110

133

111

4'-3"

121

6'-1021"

2'-6"

6'-421"

23'-921"

3'-741"

architecture interiors

3'-1121"

31'-441" V.I.F.

D-101

PLAYROOM

2'-6"

ALIGN

16'-10" V.I.F.

102

A-301

D-103

139

12'-934" V.I.F.

EXISTING BASEBOARD

P-3

1021"

PLAN 01 PLAYROOM SCALE: 1/2" = 1'-0"

1'-841"

3'-0"

3'-441"

2'-0"

5'-11"

PLAYROOM SOUTH ELEVATION SCALE: 1/2" = 1'-0"

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development 2'-034"

2'-034"

121" (FILLER)

(FILLER) 121"

2'-0"

Bid Document

2'-0"

Construction Document Supplemental Information D.O.B.

BID SET

70" TV

Seal & Signature: CUSTOM MILLWORK STORAGE P-6 SCHEDULED FAUCET AND SINK

SCHEDULED FIREPLACE SCHEDULED 24" INTEGRATED DISHWASHER

EXISTING BASEBOARD

SCHEDULED INTEGRATED WINE FRIDGE

SCHEDULED COMBINATION DRAWERS

SCHEDULED GAS FIREPLACE EXISTING BASEBOARD

D-103

P-3

2'-0" 2"

2'-0"

3 4"

PLAYROOM EAST ELEVATION

2'-3"

2'-6"

4'-034"

2'-6"

6'-0" 121"

121"

5'-8"

1'-10"

1'-2"

5'-8"

1'-0"

Date:

NORTH ELEVATION 04 PLAYROOM SCALE: 1/2" = 1'-0"

Scale:

Title:

BASEMENT PLAYROOM ELEVATIONS

SCALE: 1/2" = 1'-0" Sheet No.:

File:

A-301.00 PAGE 19 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd architecture interiors

3" 4

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

BASEMENT PLAYROOM ELEVATIONS

MILLWORK SECTION SCALE: 1 1/2" = 1'-0"

Sheet No.:

File:

A-302.00 PAGE 20 OF 34

01 A302

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

2'-3"

8'-5" 115

116

A-304

145

126

8'-141"

137

130

129

12'-2" V.I.F.

4'-3"

dhd KITCHEN 203

112

113

architecture interiors

114 C

ALIGN

A-303

03 7'-1"

D-205

139

3'-3"

01 A-304 119 16'-6"

1'-10"

POWDER 204

KITCHEN AND DINING PLAN SCALE: 1/2" = 1'-0"

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service 3 4"

Schematic Design W-1

3'-943"

W-1

FILLER PEICE

CABINET W/ ADJUSTABLE SHELVES

3'-021"

FILLER PIECE

SCHEDULED MICROWAVE BEYOND CUSTOM MILLWORK PANTRY CABINETS WITH PULL OUTS W-1

CABINET W/ ADJUSTABLE SHELVES

G-3

W-1

CABINET W/ ADJUSTABLE SHELVES

UPPER CABINETS W/ MAGNETIC TOUGH LATCH AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE

CABINET W/ ADJUSTABLE SHELVES

G-3

W-1

W-1 FRIDGE/ FREEZER

CUSTOM 48" HOOD MICROWAVE

CUSTOM MILLWORK PANTRY CABINETS WITH LOWER PULL OUTS AND UPPER ADJUSTABLE SHELVING ON SCHEDULED HARDWARE

MARBLE BACKSPLASH

SCHEDULED POT FILLER

W-1

Bid Document Construction Document

W-1 UPPER CABINET W/ MAGNETIC TOUGH LATCH AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE W-1

Supplemental Information

MARBLE COUNTERTOP

UPPER CABINET W/ ADJUSTABLE SHELVES ON SCHEDULED HARDWARE

SCHEDULED BUILT IN FRIDGE/ FREEZER W FLUSH INSET PANELS

FILLER PEICE

W-1

OPEN TO PARLOUR

CUSTOM MILLWORK PANTRY CABINETS WITH PULL OUTS W-1

SCHEDULED INTEGRATED WINE FRIDGE W-1

3'-021"

2'-8"

BID SET Seal & Signature:

S-1 SCHEDULED RANGE

D.O.B.

MAXIMIZE HEIGHT

W-1 SCHEDULED LED UNDER COUNTER TASK LIGHTING AND GFI PLUG MOLD

S-1

1'-8"

CUSTOM MILLWORK BENCH SEAT

CABINET W/ ADJUSTABLE SHELVES

2'-6"

UPPER CABINETS W/ MAGNETIC TOUCH LATCH AND ADJUSTABLE SHELVES

SCHEDULED LED LIGHT COVE DASHED BEHIND

11'-7" V.I.F

P-4

Design Development

P-4

1'-721"

UPPER CABINETS W/ MAGNETIC TOUCH LATCH AND ADJUSTABLE SHELVES

UPPER CABINET W/ MAGNETIC TOUGH LATCH AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE

4'-621"

FIXED PANEL

FILLER PEICE W-1

Date:

FILLER PEICE TOEKICK

8'-0"

2'-2"

4'-743"

3'-1" 4'-1"

16'-10" V.I.F.

202

3'-3"

DINING

KITCHEN EAST ELEVATION

W-1

1'-1021" 121"

TOEKICK

1'-1021"

2" 121"

1'-421"

W-1

TOEKICK

2'-841"

4'-0"

W-1

2'-841"

REMOVABLE TOEKICK

1'-421"

2'-3" 121"

2'-1" 121"

REMOVABLE TOEKICK

3'-641"

W-1

Scale:

Title: 121"

SCALE: 1/2" = 1'-0"

SOUTH ELEVATION 03 KITCHEN SCALE: 1/2" = 1'-0"

FIRST FLOOR KITCHEN ELEVATIONS

Sheet No.:

File:

A-303.00 PAGE 21 OF 34

303 WEST 87 STREET NEW YORK, NY 10024 1'-6"

P-4

FILLER PEICE

UPPER CABINETS W/ MAGNETIC TOUGH LATCH AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE W-1

P-4

1'-321"

W-1

P-4

3'-641"

UPPER CABINETS W/ MAGNETIC TOUGH LATCH AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE

CUSTOM MILLWORK CABINET WITH LOWER PULL OUTS AND UPPER ADJUSTABLE SHELVING ON SCHEDULED HARDWARE

P-4

1'-321"

W-1

SCHEDULED LED UNDER COUNTER TASK LIGHTING

dhd

P-4

1'-321"

LINE OF POWDER ROOM WALL

Project No.: 13007

PUSH PIN SURFACE

architecture interiors

2'-6"

7'-8"

SP-1

121"

SCHEDULED STONE COUNTER TOP

321"

S-1 CUSTOM MILLWORK DESK WITH PENCIL DRAWERS

2'-721" 2'-721"

W-1

2'-721"

P-4 EXISTING BASEBOARD

TOEKICK W-1

121"

TOEKICK

1'-9"

121"

10'-6"

121"

W-1

3'-9"

121"

KITCHEN WEST ELEVATION SCALE: 1/2" = 1'-0"

SCHEDULED FAUCET AND WATER FILTER

SCHEDULED WATER FILTER SCHEDULED FAUCET

MARBLE COUNTERTOP S-1

W-1 SINK CABINET WITH UNDERSINK LINER

TOEKICK

REMOVABLE TOEKICK

W-1

721"

1'-9"

PULL-OUT TRASH BIN: HAFELE #502.74.812

3'-021"

W-1

W-1 SCHEDULED INTEGRATED DISHWASHER

W-1 PULL-OUT TRASH BIN: HAFELE #502.74.812

W-1 FIXED PANEL

W-1

2'-11"

1'-241"

ISLAND WEST ELEVATION SCALE: 1/2" = 1'-0"

W-1 FIXED PANEL

TOEKICK

3'-021"

S-1

2'-621"

MARBLE COUNTERTOP

W-1 FIXED PANEL

W-1

1'-621"

8'-021"

1'-621"

ISLAND EAST ELEVATION SCALE: 1/2" = 1'-0"

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

Date:

Scale:

Title:

FIRST FLOOR KITCHEN ELEVATIONS

SECTION 04 MILLWORK SCALE: 1 1/2" = 1'-0"

Sheet No.:

File:

A-304.00 PAGE 22 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd architecture interiors

MILLWORK BEAD DETAIL SCALE: 6" = 1'-0"

05 A305

SCHEDULED GLASS

MILLWORK BEAD DETAIL SCALE: 6" = 1'-0"

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

DETAIL 07 MILLWORK SCALE: 6" = 1'-0"

Date:

Scale:

Title:

SECTION 01 MILLWORK SCALE: 1 1/2" = 1'-0"

MILLWORK SECTION SCALE: 1 1/2" = 1'-0"

KITCHEN MILLWORK DETAILS

Sheet No.:

File:

A-305.00 PAGE 23 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd 334"

P-4

D-203

103 05

SCHEDULED HAND TOWEL HOLDER

4'-234"

04 03

SCHEDULED FAUCET

A-306

SCHEDULED FLOOR MOUNT TOILET

7'-821"

SCHEDULED PEDESTAL SINK

4" FLUSH WD. BASEBOARD

08 A501

P-3

2'-141" EQ.

01 A304

4" FLUSH WD. BASEBOARD

POWDER

P-3

2'-141"

C L

7'-734"

EQ.

POWDER NORTH ELEVATION

SCALE: 1/2" = 1'-0"

POWDER WEST ELEVATION SCALE: 1/2" = 1'-0"

POWDER ROOM PLAN SCALE: 1/2" = 1'-0"

343"

S-3

P-4

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service

V.I.F.

2'-321"

P-4

VERTICAL LIGHT COVE; REFER TO RCP FOR TYPE

Schematic Design

L-7

Design Development Bid Document

3'-0"

CUSTOM MEDICINE CABINET

Construction Document

9'-1" V.I.F. 1'-0"

Supplemental Information D.O.B.

SCHEDULED TP HOLDER PROVIDE BLOCKING TYP. SCHEDULED FLOOR MOUNT TOILET

4" FLUSH WD. BASEBOARD

BID SET

3'-1134"

SCHEDULED PEDESTAL SINK

3'-3"

SCHEDULED FAUCET

2'-1021"

CUSTOM MEDICINE CABINET

131

204

L-7

2'-821"

2'-8"

3'-3"

architecture interiors

VERTICAL LIGHT COVE; REFER TO RCP FOR TYPE

Seal & Signature:

D-203

P-3

1'-741"

SOUTH ELEVATION 04 POWDER SCALE: 1/2" = 1'-0"

3'-241"

2'-6"

1'-1134"

EAST ELEVATION 05 POWDER SCALE: 1/2" = 1'-0"

SECTION 06 MILLWORK SCALE: 1 1/2" = 1'-0"

Date:

Scale:

Title:

FIRST FLOOR POWDER ROOM ELEVATIONS

Sheet No.:

File:

A-306.00 PAGE 24 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd

03 05

02 04 A-307

EXISTING COLUMN

architecture interiors

11'-8" V.I.F.

P-4

CLOSET INTERIOR BY OTHERS

7'-841"

207

P-4

11'-8" V.I.F.

CLOSET

CLOSET INTERIOR BY OTHERS

117

D-202

2'-0"

2'-8"

2'-0" 10"

CLOSET PLAN

SCALE: 1/2" = 1'-0"

CLOSET EAST ELEVATION

SCALE: 1/2" = 1'-0"

POWDER WEST ELEVATION SCALE: 1/2" = 1'-0"

P-4

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service

EXISTING COLUMN P-3

Schematic Design Design Development P-4

11'-8" V.I.F.

7'-841"

5'-10"

P-4

Bid Document

CLOSET INTERIOR BY OTHERS

Construction Document Supplemental Information D.O.B.

BID SET Seal & Signature:

2'-0"

2'-8"

CLOSET WEST ELEVATION SCALE: 1/2" = 1'-0"

6'-1041"

2'-0"

10"

CLOSET NORTH ELEVATION SCALE: 1/2" = 1'-0" Date:

Scale:

Title:

FIRST FLOOR CLOSET ELEVATIONS

Sheet No.:

File:

A-307.00 PAGE 25 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

01 A306

Project No.: 13007

2'-7" EQ.

108

2'-10"

D-311

5'-2"

10'-6" V.I.F.

2'-0"

A 5

dhd

134

architecture interiors

EXISTING BASEBOARD

2'-7" EQ.

139

16'-10" V.I.F.

02 04

A-308

MASTER BEDROOM EAST ELEVATION SCALE: 1/2" = 1'-0"

MASTER BEDROOM

10" V.I.F.

307

7'-2"

D-307

SCHEDULED GRILLE EXTENDED SOFFIT

1'-8" V.I.F.

134

D-310

2'-0"

7'-8"

16'-441" V.I.F.

BEDROOM PLAN 01 MASTER SCALE: 1/2" = 1'-0" 4"

D-311

D-303

4'-4"

1'-621"

2'-8"

BID SET

06.13.13

No.

Issue

Date

D-310

PHASE: Predesign Service

6'-3" 321"

BEDROOM SOUTH ELEVATION 03 MASTER SCALE: 1/2" = 1'-0"

Schematic Design Design Development Bid Document Construction Document 10" V.I.F.

Supplemental Information D.O.B.

BID SET

9'-8" V.I.F.

Seal & Signature:

Date:

Scale:

Title:

EXISTING CASING & BASEBOARD

D-307 D-305

2'-10"

BEDROOM NORTH ELEVATION 04 MASTER SCALE: 1/2" = 1'-0"

2'-7"

SECOND FLOOR MASTER BEDROOM ELEVATIONS

Sheet No.:

File:

A-308.00 PAGE 26 OF 34

06 08

01 A307

303 WEST 87 STREET

A-309

NEW YORK, NY 10024 P-5

P-5

T-2

10"

G-1

6'-5"

3'-321" 106

02 05

03 04

304

2'-0"

102

15'-5" 5'-3"

734"

2'-6"

SCHEDULED DROP IN TUB WITH TILE SURROUND

architecture interiors

1021" STONE CURB S-2

T-1

135

D EBOARD

D-303

D-309

P-3

D-304

934"

2'-6"

1'-1"

1'-1141"

D-303

4" 5"

S-2

SCHEDULED FLUSH BASEBOARD

2'-0"

6'-634"

4'-541"

2'-8"

M.BATHROOM EAST ELEVATION

SCALE: 1/2" = 1'-0"

2'-2"

1'-621"

2'-9"

POWDER NORTH ELEVATION SCALE: 1/2" = 1'-0"

821"

321"

2'-8"

A-309 2'-8"

107

MASTER BATHROOM

STONE LEDGE

2'-541"

D-309

SCHEDULED DECK MOUNT FAUCET AND HANDSHOWER

4'-5"

9'-8"

2'-521"

E/P

1'-621"

10"

SCHEDULED SHOWER DOOR PULL

2'-8"

103

GLASS SHOWER ENCLOSURE. RECESS CHANNELS INTO WALLS

4'-3"

3'-5"

3'-0"

2'-0"

3'-321"

2'-6"

dhd

P-3

SCHEDULED SHOWER DOOR HINGE

D OK

142

1'-1"

Project No.: 13007

SCHEDULED TRANSOM HARDWARE

P-3

OWNER SUPPLIED PENDANT

P-5

5'-4"

534"

MASTER BATHROOM PLAN SCALE: 1/2" = 1'-0"

P-5

T-2

P-5

MAGNETIC TOUCH LATCH CUSTOM MILLWORK MEDICINE CABINET

G-2

3'-6"

P-1

SCHEDULED ROBE HOOK

SCH ROB

1/4" MIRROR ON 3/4" PLYWOOD MEDICINE CABINET DOOR

OWNER SUPPLIED VANITY LIGHT

1'-1"

SCHEDULED TOWEL BAR

EQ EQ

5'-8"

TILE FLUSH TO ADJACENT DRYWALL SCHEDULED UNDERMOUNT TUB WITH TILE SURROUND

SCHEDULED DECK-MOUNTED FAUCET SCHEDULED HAND TOWEL BAR

SCHEDULED TUB AND TUB FILLER

2'-4"

P-1

S-2

P-

6" 3'-1"

T-1

SCH FLUS

SCHEDULED FLUSH BASEBOARD

P-3

3/8" THK. ADJUSTABLE GLASS SHELVING ON SCHEDULED HARDWARE

STONE LEDGE WITH TILE FACE

3'-3"

CUSTOM MILLWORK VANITY WITH STONE COUNTER

1'-434"

3'-11"

P-3

M.BATHROOM WEST ELEVATION

2'-9"

SCALE: 1/2" = 1'-0"

1'-621"

2'-2"

2'-8"

BID SET

06.13.13

Issue

Date

PHASE: Predesign Service

D-304

SCHEDULED FLUSH BASEBOARD

3'-1"

01 No.

MAGNETIC TOUCH LATCH

Schematic Design

M.BATHROOM SOUTH ELEVATION

Design Development

SCALE: 1/2" = 1'-0"

Bid Document Construction Document

SCHEDULED STONE

Supplemental Information D.O.B.

BID SET

09 A309

Seal & Signature: SCHEDULED SHOWER HEAD; ALIGN WITH TILE MODULE

SCHEDULED STONE

7'-0"

1'-5"

SCHEDULED HAND SHOWER; ALIGN WITH TILE MODULE.

CUSTOM MILLWORK VANITY W/ STONE SURROUND ON EUROPEAN STYLE HINGES

NICHE SHELF;MAXIMIZE DEPTH; ALIGN WITH TILE MODULE.

4'-0"

3'-321"

4'-0"

SCHEDULED PULL

SCHEDULED VANITY CABINET

S-2

P-1

3/4" THK. ADJUSTABLE WOOD SHELVING ON HAFELE SHELF SUPPORT#282.39.705 W/ SPREADING DOWEL# 051.45.030

Date:

Scale:

Title: STONE CURB

M.BATH SHOWER ELEVATION SCALE: 1/2" = 1'-0"

STONE CURB

M.BATH SHOWER ELEVATION SCALE: 1/2" = 1'-0"

MILLWORK DETAIL SCALE: 1/2" = 1'-0"

MILLWORK SECTION SCALE: 1 1/2" = 1'-0"

SECOND FLOOR MASTER BATHROOM ELEVATIONS

Sheet No.:

File:

A-309.00 PAGE 27 OF 34

303 WEST 87 STREET P-4

P-4

NEW YORK, NY 10024

P-4

Project No.: 13007

dhd

CUSTOM MILLWORK DISPLAY SHELF P-6

SCHEDULED LED UNDER COUNTER TASK LIGHTING

P-4

CUSTOM MILLWORK DESK WITH PENCIL DRAWERS

CUSTOM MILLWORK STORAGE CABINETS P-6

architecture interiors

P-6

SCHEDULED PULLS

1'-641"

4'-5"

2'-8"

MILLWORK ELEVATION 01 STUDY SCALE: 1/2" = 1'-0"

01 A308

A-309

4'-3"

139 6'-5"

-321" 6

PHASE: Predesign Service

Bid Document A-310

821"

303

Construction Document Supplemental Information

W-303

D.O.B.

BID SET

5'-4"

Seal & Signature:

139

D-301

120

2'-8" V.I.F.

W-304

14'-1"

LINEN

1'-8"

1'-1134"

Date

STUDY

534" 2'-8"

06.13.13

Issue

Schematic Design

2'-8"

1'-1141"

D-304

BID SET

Design Development 02

2'-0"

01 No.

135

16'-1141" V.I.F.

107 102

W-302

139 2'-541"

9'-8"

4'-5"

1'-8"

W-301

2'-0"

334"

SCALE: 1/2" = 1'-0"

01 A307

STUDY ELEVATION

302

Date:

Scale:

Title:

SECOND FLOOR STUDY ELEVATIONS

STUDY PLAN SCALE: 1 1/2" = 1'-0"

ELEVATION 03 MILLWORK SCALE: 1 1/2" = 1'-0"

ELEVATION 04 MILLWORK SCALE: 1 1/2" = 1'-0"

Sheet No.:

File:

A-310.00 PAGE 28 OF 34

303 WEST 87 STREET

Project No.: 13007

3'-121"

5'-3" BATHROOM 3

02 03

403

103

05 04 A-31111'-5 1"

B 104 141

1'-541"

102 3'-641"

3'-1141"

dhd

1'-4"

3 3 6'-56'-5 4" 4 "

135

2'-621"

1'-9"

1'-543" 1'-0"

NEW YORK, NY 10024

REVEAL

2'-8"

2'-741"

D-403

2'-8"

BATHROOM 3 PLAN SCALE: 1/2" = 1'-0"

1'-721"

2'-8"

architecture interiors

CUSTOM MILLWORK UPPER CABINETS W/ MAGNETIC TOUCH LATCH AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE

P-1

1041"

1" 64 T-1

3" 4

T-1

1'-1141"

CUSTOM MILLWORK CABINETRY

FIXED PANEL

SCHEDULED VANITY LIGHT

P-1

MAGNETIC TOUCH LATCH

CUSTOM MILLWORK MEDICINE CABINET G-2

P1 7'-8"

SCHEDULED ALCOVE TUB

OWNER SUPPLIED PULL

TOEKICK

1'-834"

2'-8"

3 4"

BATHROOM 3 EAST ELEVATION

SCALE: 1/2" = 1'-0"

1/4" MIRROR ON 3/4" PLYWOOD MEDICINE CABINET DOOR

1'-441"

2'-0"

1'-0"

BATHROOM 3 NORTH ELEVATION SCALE: 1/2" = 1'-0"

CUSTOM MILLWORK MEDICINE CABINET ON 3/4" FRENCH CLEATS 2"

1'-834"

3'-7"

P-1

2'-6"

SCHEDULED FLOOR MOUNT TOILET

CUSTOM MILLWORK LOWER CABINETS W/ SCHEDULED PULL AND ADJUSTABLE SHELVES ON SCHEDULED HARDWARE

CLEAR COAT MAPLE INTERIOR, TYP. ALL

S-2

1'-0"

CUSTOM MILLWORK VANITY WITH STONE COUNTER AND SCHEDULED DECK MOUNTED FAUCET P1 S2

1'-9"

3/8" THK. ADJUSTABLE GLASS SHELVING ON HAFELE SHELF SUPPORT#282.39.705 W/ SPREADING DOWEL# 051.45.030

3'-7"

CUSTOM MILLWORK VANITY WITH STONE COUNTER AND SCHEDULED DECK MOUNTED FAUCET

P-1

G-2

CLEAR COAT MAPLE INTERIOR, TYP. ALL

SCHEDULED TILE WALL 1'-0"

T-1

SCHEDULED DECK MOUNTED FAUCET

BID SET

06.13.13

Issue

Date

PHASE: Predesign Service Schematic Design

3/4" THK. ADJUSTABLE WOOD SHELVING ON HAFELE SHELF SUPPORT#282.39.705 W/ SPREADING DOWEL# 051.45.030

SCHEDULED COUNTERTOP AND FASCIA

T-1 T-1

01 No.

Design Development Bid Document Construction Document

S-2

SCHEDULED SHOWER CURTAIN ROD

SCHEDULED UNDERMOUNT SINK

Supplemental Information

OWNER SUPPLIED PULL

D.O.B.

2'-6"

CUSTOM MILLWORK VANITY W/ INTEGRATED FINGER PULL ON EUROPEAN STYLE HINGES P-1

SCHEDULED SHOWER BAR S-2

BID SET Seal & Signature:

S-2

3/4" THK. ADJUSTABLE WOOD SHELVING ON HAFELE SHELF SUPPORT#282.39.705 W/ SPREADING DOWEL# 051.45.030

3'-3"

FINISHED FLOOR

BLOCKING AS REQ'D 3" 4

CLEAR COAT MAPLE INTERIOR, TYP. ALL

P-1

BLOCKING AS REQ'D

SCHEDULED HOTEL TOWEL BAR

3/4" FIXED MILLWORK PANEL W/ 1/4" MIRROR ATTACHED

4'-0"

CUSTOM MILLWORK MEDICINE CABINET WITH MIRROR AND WOOD SURROUND

7'-5"

P-1

D-403

2'-8"

2'-741"

2'-8"

3 WEST ELEVATION 04 BATHROOM SCALE: 1/2" = 1'-0"

1'-941"

1'-9"

6'-534"

3 SOUTH ELEVATION 05 BATHROOM SCALE: 1/2" = 1'-0"

SECTION 06 MILLWORK SCALE: 1 1/2" = 1'-0"

SECTION 07 MILLWORK SCALE: 1 1/2" = 1'-0"

Date:

Scale:

Title:

THIRD FLOOR BATHROOM3 ELEVATIONS

Sheet No.:

File:

A-311.00 PAGE 29 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd

W-401

ALIGN

C 139

D-409

9'-4"

2'-521" 140 architecture interiors

BEDROOM 1

134

407

02 03

13'-621"

2'-0"

16'-621" V.I.F.

W-403

A-312

V.I.F.

134 3'-7"

143

119

W-404

1'-0"

D-402

3'-6"

139

1 PLAN 01 BEDROOM SCALE: 1/2" = 1'-0"

BID SET

06.13.13

No.

Issue

Date

3 4"

PHASE: Predesign Service Schematic Design Design Development 4'-221" V.I.F..

CUSTOM MILLWORK STORAGE CABINETS

Bid Document Construction Document Supplemental Information

P-6

DISPLAY NICHE

OPEN DISPLAY NICHE WITH ADJUSTABLE SHELVES P-6

D.O.B.

PUSH PIN SURFACE

BID SET

P-6 EXISTING BASEBOARD

EQ.

CUSTOM MILLWORK REMOVABLE PANEL P-6

P-3

CUSTOM MILLWORK STORAGE CABINETS P-6

EX'G DOOR CASING P-3 NEW BASE TO MATCH EX'G P-3

6'-834" V.I.F.

2 SOUTH ELEVATION 02 BEDROOM SCALE: 1/2" = 1'-0"

NEW DOOR CASING MATCH EX'G

3'-3"

NEW GRILLE ON WINDOW SILL

CUSTOM MILLWORK BENCH

NEW GRILLE ON WINDOW SILL

6'-421"

8'-0"

Seal & Signature:

TOEKICK

2'-241"

P-3 D-403

D-409

6'-634"

121"

WEST ELEVATION 03 BEDROOM1 SCALE: 1/2" = 1'-0"

Date:

NORTH ELEVATION 04 BEDROOM1 SCALE: 1/2" = 1'-0"

Scale:

Title:

THIRD FLOOR BEDROOM1 ELEVATIONS

Sheet No.:

File:

A-312.00 PAGE 30 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd

1'-4"

134

119

D-407

2'-0"

4'-11"

14'-741"

D-410

architecture interiors

16'-10" V.I.F.

D-406

139

A-313

134 BEDROOM 2 402

7'-1"

D-411

16'-741" V.I.F.

BEDROOM 2 PLAN SCALE: 1/2" = 1'-0"

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development 4'-341" V.I.F.

Bid Document Construction Document Supplemental Information

CUSTOM MILLWORK STORAGE CABINETS

D.O.B. PUSH PIN SURFACE

DISPLAY NICHE

P-6

DISPLAY NICHE

OPEN DISPLAY NICHE WITH ADJUSTABLE SHELVES

BID SET

4'-221" EQ.

Seal & Signature:

6'-421"

P-6

CUSTOM MILLWORK DESK P-6 NEW BASE TO MATCH EX'G 4"

P-3

121"

1'-741"

4'-921"

1'-741"

NEW CASING & BASE TO MATCH EX'G

NEW CASING & BASE TO MATCH EX'G D-410

P-3

3'-0"

121"

D-411

P-3 6'-0"

Date:

Scale:

Title:

BEDROOM2 EAST ELEVATION SCALE: 1/2" = 1'-0"

BEDROOM2 SOUTH ELEVATION SCALE: 1/2" = 1'-0"

THIRD FLOOR BEDROOM 2 ELEVATIONS

Sheet No.:

File:

A-313.00 PAGE 31 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

dhd architecture interiors

NEW GRILLE

CUSTOM MILLWORK PANEL

EX'G FIN TUBE TO REMAIN FRAMING AS REQ'D NEW GRILLE

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service

SECTION 01 MILLWORK SCALE: 1 1/2" = 1'-0"

Schematic Design Design Development Bid Document Construction Document Supplemental Information D.O.B.

NEW GRILLE

BID SET Seal & Signature:

CUSTOM MILLWORK BENCH

EX'G FIN TUBE TO REMAIN

FRAMING AS REQ'D NEW GRILLE 2"

Date:

Scale:

Title:

MILLWORK DETAILS

MILLWORK SECTION SCALE: 1 1/2" = 1'-0"

Sheet No.:

File:

A-314.00 PAGE 32 OF 34

303 WEST 87 STREET NEW YORK, NY 10024 SCHEDULED WALL TILE INSTALLED TO TUB DECK W/ TILE BEAD ALL SIDES (TYPICAL)

Project No.: 13007

dhd

CONTINUOUS SILICONE SEALANT JOINT BETWEEN TUB AND WALL TILE

PROVIDE CONTINUOUS SILICONE SEALANT

SECONDARY LAYER OF LATICRETE ® HYDRO BAN™ WATERPROOFING MEMBRANE EXTEND TO TUB

WALL TILE AND GROUT

SCHEDULED DROP IN BATHTUB INSTALLED PER MANUFACTURER'S INSTRUCTIONS; PROVIDE FRAMING AS REQUIRED

architecture interiors

DUROCK ON FRAMING AS REQUIRED LATICRETE® HYDRO BAN™ WATERPROOFING MEMBRANE INSTALLED UNDER TUB DECK AND DRAPED OVER FRAMING; EXTEND FULL HEIGHT UP WALL

LATICRETE 170 SOUND AND CRACK ISOLATION MAT

SHOWER CURB & FLOOR DETAIL

LATICRETE® HYDRO BAN™ WATERPROOFING MEMBRANE, EXTEND UNDER TUB AND DRAPED OVER FRAMING

LINE OF EXISTING SUB-FLOOR

PAINT WHITE L.O. GWB. ON FRAMING AS REQUIRED

SHOWER NICHE DETAIL 3"=1'-0"



DROP IN TUB DETAIL 

3"=1'-0"

SCHEDULED 3 4" STONE SLAB SURROUND MEDICINE CABINET

GWB ON FRAMING

SCHEDULED LED STRIP LIGHT 1 " 4

DUROCK

PLYWOOD

LATICRETE 170 SOUND AND CRACK ISOLATION MAT UNDER TUB

LATICRETE® HYDRO BAN™ WATERPROOFING MEMBRANE

3"=1'-0"



SCHEDULED WALL TILE AND GROUT DUROCK ON FRAMING SCHEDULED WOOD FLOOR

BLOCKING AS REQ'D

LATICRETE HYDRO BAN WATERPROOFING MEMBRANE, EXTENDS 8" UP WALL FACE MINIMUM

FRAMING AND BLOCKING AS REQ'D

SCHEDULED FLOOR TILE AND GROUT

SCHEDULED WOOD BASE AND SHOE MOLDING TO MATCH EXISTING

1 4"

1/4" THK. CORK EXPANSION BLOCK

THINSET SETTING BED; LATICRETE SURE SET OR APPROVED EQUAL

LATICRETE 170 SOUND AND CRACK ISOLATION MAT

LINE OF EXISTING SUB-FLOOR

LINE OF EXISTING FLOOR

TILE FLOOR TO TILE WALL

BID SET

06.13.13

Issue

Date

PHASE: Predesign Service Schematic Design

WOOD BASE ON WOOD FLOOR

HALF FULL SCALE



01 No.



HALF FULL SCALE

Design Development Bid Document Construction Document Supplemental Information

WALL / JAMB WIDTH - V.I.F. 1 4"

(V.I.F.)

D.O.B.

1 4"

3/4" THICK T.&G. WOOD PLANKS ON 3/4" T.&G. PLYWOOD SUBSTRATE. STAIN AS SPECIFIED.

SCHEDULED WOOD FLOOR

1/4" MIRROR ON 3/4" PLYWOOD MEDICINE CABINET DOOR

SCHEDULED SOLID CORE DOOR 1/8" STAINLESS STEEL ANGLE MOUNTED FLUSH TO ADJACENT WOOD FINISH

S-2 STONE SADDLE W/ 1/4" CHAMFERED EDGE; VERIFY SADDLE DESIGN IN FIELD LATICRETE® HYDRO BAN™ WATERPROOFING MEMBRANE, EXTEND UNDER SADDLE AND TURN UP AT DRY SIDE

SCHEDULED LED STRIP LIGHT 3

PLYWOOD

PAINT WHITE L.O. GWB. ON FRAMING AS REQUIRED

1" 8

ALIGN

1 4"

LINE OF EXISTING WOOD FLOOR

MEDICINE CABINET HORIZONTAL SECTION DETAIL 

3"=1'-0"

WOOD TO TILE SADDLE DETAIL 

HALF FULL SCALE

TILE FLOORING ON THINSET. REFER TO FINISH SCHEDULE (2) LAYERS 1/2" DUROCK SUBFLOOR ON 5MM VAPOR BARRIER

SCHEDULED FLOOR TILE AND GROUT

1 4"

THINSET SETTING BED; LATICRETE SURE SET OR APPROVED EQUAL

NEW POURED CONCRETE SLAB OR T.&G. PLYWOOD SUBSTRATE ON LEVELING SHIMS

DUROCK

1 4"

1 4" UNDERCUT

SCHEDULED 4" STONE SLAB SURROUND MEDICINE CABINET

BID SET Seal & Signature:

1/4" CONTINUOUS SILICON EXPANSION JOINT

LATICRETE 170 SOUND AND CRACK ISOLATION MAT

Date:

Scale:

Title:

TYPICAL DETAILS

WOOD FLOOR TO 10MM TILE 

HALF FULL SCALE

Sheet No.:

File:

A-501.00 PAGE 33 OF 34

303 WEST 87 STREET NEW YORK, NY 10024

Project No.: 13007

DOOR TYPE '8' (JAMB) SCALE: N.T.S.

3" 4

DOOR TYPE '9' (JAMB)

3" 4

dhd

SCALE: N.T.S.

WINDOW TYPE 'E' (JAMB)

architecture interiors

SCALE: N.T.S.

1" 16 2"

3" 4

1 32 "

3 4"

SCHEDULED DOOR; REFER TO SCHEDULE

31" 2

3" 4

31" 2

1" 24

BLOCKING AS REQUIRED

BID SET

06.13.13

No.

Issue

Date

PHASE: Predesign Service Schematic Design Design Development Bid Document Construction Document Supplemental Information D.O.B.

BID SET

1" 62

Seal & Signature:

3" 4

61" 2

Date:

DOOR TYPE '8' (HEAD) SCALE: N.T.S.

DOOR TYPE '9' (HEAD) SCALE: N.T.S.

Scale:

Title:

3" 4

3" 8

V.I.F.

13" 4

SCHEDULED SQUARE HINGE EXCEPT WHERE NOTED; REFER TO SCHEDULE

WINDOW TYPE 'E' (HEAD)

DOOR AND WINDOW DETAILS

SCALE: N.T.S.

Sheet No.:

File:

A-502.00 PAGE 34 OF 34